diff options
Diffstat (limited to 'sound/soc/pxa/pxa2xx-ac97.c')
| -rw-r--r-- | sound/soc/pxa/pxa2xx-ac97.c | 88 |
1 files changed, 71 insertions, 17 deletions
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 815c15336255..97ec2d90547c 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/wait.h> +#include <linux/clk.h> #include <linux/delay.h> #include <sound/core.h> @@ -27,6 +28,7 @@ #include <linux/mutex.h> #include <asm/hardware.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/audio.h> #include "pxa2xx-pcm.h" @@ -35,6 +37,10 @@ static DEFINE_MUTEX(car_mutex); static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); static volatile long gsr_bits; +static struct clk *ac97_clk; +#ifdef CONFIG_PXA27x +static struct clk *ac97conf_clk; +#endif /* * Beware PXA27x bugs: @@ -55,7 +61,7 @@ static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, mutex_lock(&car_mutex); /* set up primary or secondary codec/modem space */ -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; #else if (reg == AC97_GPIO_STATUS) @@ -81,7 +87,7 @@ static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1); if (!((GSR | gsr_bits) & GSR_SDONE)) { printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n", - __FUNCTION__, reg, GSR | gsr_bits); + __func__, reg, GSR | gsr_bits); val = -1; goto out; } @@ -105,7 +111,7 @@ static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, mutex_lock(&car_mutex); /* set up primary or secondary codec/modem space */ -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; #else if (reg == AC97_GPIO_STATUS) @@ -121,13 +127,16 @@ static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1); if (!((GSR | gsr_bits) & GSR_CDONE)) printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n", - __FUNCTION__, reg, GSR | gsr_bits); + __func__, reg, GSR | gsr_bits); mutex_unlock(&car_mutex); } static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) { +#ifdef CONFIG_PXA3xx + int timeout = 100; +#endif gsr_bits = 0; #ifdef CONFIG_PXA27x @@ -138,6 +147,11 @@ static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) GCR |= GCR_WARM_RST; pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); udelay(500); +#elif defined(CONFIG_PXA3xx) + /* Can't use interrupts */ + GCR |= GCR_WARM_RST; + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(1); #else GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN; wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); @@ -145,7 +159,7 @@ static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", - __FUNCTION__, gsr_bits); + __func__, gsr_bits); GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); GCR |= GCR_SDONE_IE|GCR_CDONE_IE; @@ -153,17 +167,34 @@ static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) { +#ifdef CONFIG_PXA3xx + int timeout = 1000; + + /* Hold CLKBPB for 100us */ + GCR = 0; + GCR = GCR_CLKBPB; + udelay(100); + GCR = 0; +#endif + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ GCR &= ~GCR_COLD_RST; /* then assert nCRST */ gsr_bits = 0; #ifdef CONFIG_PXA27x /* PXA27x Developers Manual section 13.5.2.2.1 */ - pxa_set_cken(CKEN_AC97CONF, 1); + clk_enable(ac97conf_clk); udelay(5); - pxa_set_cken(CKEN_AC97CONF, 0); + clk_disable(ac97conf_clk); GCR = GCR_COLD_RST; udelay(50); +#elif defined(CONFIG_PXA3xx) + /* Can't use interrupts on PXA3xx */ + GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + + GCR = GCR_WARM_RST | GCR_COLD_RST; + while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(10); #else GCR = GCR_COLD_RST; GCR |= GCR_CDONE_IE|GCR_SDONE_IE; @@ -172,7 +203,7 @@ static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", - __FUNCTION__, gsr_bits); + __func__, gsr_bits); GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); GCR |= GCR_SDONE_IE|GCR_CDONE_IE; @@ -255,7 +286,7 @@ static int pxa2xx_ac97_suspend(struct platform_device *pdev, struct snd_soc_cpu_dai *dai) { GCR |= GCR_ACLINK_OFF; - pxa_set_cken(CKEN_AC97, 0); + clk_disable(ac97_clk); return 0; } @@ -270,7 +301,7 @@ static int pxa2xx_ac97_resume(struct platform_device *pdev, /* Use GPIO 113 as AC97 Reset on Bulverde */ pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); #endif - pxa_set_cken(CKEN_AC97, 1); + clk_enable(ac97_clk); return 0; } @@ -294,16 +325,33 @@ static int pxa2xx_ac97_probe(struct platform_device *pdev) #ifdef CONFIG_PXA27x /* Use GPIO 113 as AC97 Reset on Bulverde */ pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + + ac97conf_clk = clk_get(&pdev->dev, "AC97CONFCLK"); + if (IS_ERR(ac97conf_clk)) { + ret = PTR_ERR(ac97conf_clk); + ac97conf_clk = NULL; + goto err_irq; + } #endif - pxa_set_cken(CKEN_AC97, 1); + ac97_clk = clk_get(&pdev->dev, "AC97CLK"); + if (IS_ERR(ac97_clk)) { + ret = PTR_ERR(ac97_clk); + ac97_clk = NULL; + goto err_irq; + } + clk_enable(ac97_clk); return 0; - err: - if (CKEN & (1 << CKEN_AC97)) { - GCR |= GCR_ACLINK_OFF; - free_irq(IRQ_AC97, NULL); - pxa_set_cken(CKEN_AC97, 0); + err_irq: + GCR |= GCR_ACLINK_OFF; +#ifdef CONFIG_PXA27x + if (ac97conf_clk) { + clk_put(ac97conf_clk); + ac97conf_clk = NULL; } +#endif + free_irq(IRQ_AC97, NULL); + err: return ret; } @@ -311,7 +359,13 @@ static void pxa2xx_ac97_remove(struct platform_device *pdev) { GCR |= GCR_ACLINK_OFF; free_irq(IRQ_AC97, NULL); - pxa_set_cken(CKEN_AC97, 0); +#ifdef CONFIG_PXA27x + clk_put(ac97conf_clk); + ac97conf_clk = NULL; +#endif + clk_disable(ac97_clk); + clk_put(ac97_clk); + ac97_clk = NULL; } static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream, |