diff options
Diffstat (limited to 'sound/soc/meson/axg-spdifout.c')
-rw-r--r-- | sound/soc/meson/axg-spdifout.c | 456 |
1 files changed, 456 insertions, 0 deletions
diff --git a/sound/soc/meson/axg-spdifout.c b/sound/soc/meson/axg-spdifout.c new file mode 100644 index 000000000000..9dea528053ad --- /dev/null +++ b/sound/soc/meson/axg-spdifout.c @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet <jbrunet@baylibre.com> + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/regmap.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> +#include <sound/pcm_params.h> +#include <sound/pcm_iec958.h> + +/* + * NOTE: + * The meaning of bits SPDIFOUT_CTRL0_XXX_SEL is actually the opposite + * of what the documentation says. Manual control on V, U and C bits is + * applied when the related sel bits are cleared + */ + +#define SPDIFOUT_STAT 0x00 +#define SPDIFOUT_GAIN0 0x04 +#define SPDIFOUT_GAIN1 0x08 +#define SPDIFOUT_CTRL0 0x0c +#define SPDIFOUT_CTRL0_EN BIT(31) +#define SPDIFOUT_CTRL0_RST_OUT BIT(29) +#define SPDIFOUT_CTRL0_RST_IN BIT(28) +#define SPDIFOUT_CTRL0_USEL BIT(26) +#define SPDIFOUT_CTRL0_USET BIT(25) +#define SPDIFOUT_CTRL0_CHSTS_SEL BIT(24) +#define SPDIFOUT_CTRL0_DATA_SEL BIT(20) +#define SPDIFOUT_CTRL0_MSB_FIRST BIT(19) +#define SPDIFOUT_CTRL0_VSEL BIT(18) +#define SPDIFOUT_CTRL0_VSET BIT(17) +#define SPDIFOUT_CTRL0_MASK_MASK GENMASK(11, 4) +#define SPDIFOUT_CTRL0_MASK(x) ((x) << 4) +#define SPDIFOUT_CTRL1 0x10 +#define SPDIFOUT_CTRL1_MSB_POS_MASK GENMASK(12, 8) +#define SPDIFOUT_CTRL1_MSB_POS(x) ((x) << 8) +#define SPDIFOUT_CTRL1_TYPE_MASK GENMASK(6, 4) +#define SPDIFOUT_CTRL1_TYPE(x) ((x) << 4) +#define SPDIFOUT_PREAMB 0x14 +#define SPDIFOUT_SWAP 0x18 +#define SPDIFOUT_CHSTS0 0x1c +#define SPDIFOUT_CHSTS1 0x20 +#define SPDIFOUT_CHSTS2 0x24 +#define SPDIFOUT_CHSTS3 0x28 +#define SPDIFOUT_CHSTS4 0x2c +#define SPDIFOUT_CHSTS5 0x30 +#define SPDIFOUT_CHSTS6 0x34 +#define SPDIFOUT_CHSTS7 0x38 +#define SPDIFOUT_CHSTS8 0x3c +#define SPDIFOUT_CHSTS9 0x40 +#define SPDIFOUT_CHSTSA 0x44 +#define SPDIFOUT_CHSTSB 0x48 +#define SPDIFOUT_MUTE_VAL 0x4c + +struct axg_spdifout { + struct regmap *map; + struct clk *mclk; + struct clk *pclk; +}; + +static void axg_spdifout_enable(struct regmap *map) +{ + /* Apply both reset */ + regmap_update_bits(map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_RST_OUT | SPDIFOUT_CTRL0_RST_IN, + 0); + + /* Clear out reset before in reset */ + regmap_update_bits(map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_RST_OUT, SPDIFOUT_CTRL0_RST_OUT); + regmap_update_bits(map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_RST_IN, SPDIFOUT_CTRL0_RST_IN); + + /* Enable spdifout */ + regmap_update_bits(map, SPDIFOUT_CTRL0, SPDIFOUT_CTRL0_EN, + SPDIFOUT_CTRL0_EN); +} + +static void axg_spdifout_disable(struct regmap *map) +{ + regmap_update_bits(map, SPDIFOUT_CTRL0, SPDIFOUT_CTRL0_EN, 0); +} + +static int axg_spdifout_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + axg_spdifout_enable(priv->map); + return 0; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + axg_spdifout_disable(priv->map); + return 0; + + default: + return -EINVAL; + } +} + +static int axg_spdifout_digital_mute(struct snd_soc_dai *dai, int mute) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + + /* Use spdif valid bit to perform digital mute */ + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, SPDIFOUT_CTRL0_VSET, + mute ? SPDIFOUT_CTRL0_VSET : 0); + + return 0; +} + +static int axg_spdifout_sample_fmt(struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + unsigned int val; + + /* Set the samples spdifout will pull from the FIFO */ + switch (params_channels(params)) { + case 1: + val = SPDIFOUT_CTRL0_MASK(0x1); + break; + case 2: + val = SPDIFOUT_CTRL0_MASK(0x3); + break; + default: + dev_err(dai->dev, "too many channels for spdif dai: %u\n", + params_channels(params)); + return -EINVAL; + } + + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_MASK_MASK, val); + + /* FIFO data are arranged in chunks of 64bits */ + switch (params_physical_width(params)) { + case 8: + /* 8 samples of 8 bits */ + val = SPDIFOUT_CTRL1_TYPE(0); + break; + case 16: + /* 4 samples of 16 bits - right justified */ + val = SPDIFOUT_CTRL1_TYPE(2); + break; + case 32: + /* 2 samples of 32 bits - right justified */ + val = SPDIFOUT_CTRL1_TYPE(4); + break; + default: + dev_err(dai->dev, "Unsupported physical width: %u\n", + params_physical_width(params)); + return -EINVAL; + } + + /* Position of the MSB in FIFO samples */ + val |= SPDIFOUT_CTRL1_MSB_POS(params_width(params) - 1); + + regmap_update_bits(priv->map, SPDIFOUT_CTRL1, + SPDIFOUT_CTRL1_MSB_POS_MASK | + SPDIFOUT_CTRL1_TYPE_MASK, val); + + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_MSB_FIRST | SPDIFOUT_CTRL0_DATA_SEL, + 0); + + return 0; +} + +static int axg_spdifout_set_chsts(struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + unsigned int offset; + int ret; + u8 cs[4]; + u32 val; + + ret = snd_pcm_create_iec958_consumer_hw_params(params, cs, 4); + if (ret < 0) { + dev_err(dai->dev, "Creating IEC958 channel status failed %d\n", + ret); + return ret; + } + val = cs[0] | cs[1] << 8 | cs[2] << 16 | cs[3] << 24; + + /* Setup channel status A bits [31 - 0]*/ + regmap_write(priv->map, SPDIFOUT_CHSTS0, val); + + /* Clear channel status A bits [191 - 32] */ + for (offset = SPDIFOUT_CHSTS1; offset <= SPDIFOUT_CHSTS5; + offset += regmap_get_reg_stride(priv->map)) + regmap_write(priv->map, offset, 0); + + /* Setup channel status B bits [31 - 0]*/ + regmap_write(priv->map, SPDIFOUT_CHSTS6, val); + + /* Clear channel status B bits [191 - 32] */ + for (offset = SPDIFOUT_CHSTS7; offset <= SPDIFOUT_CHSTSB; + offset += regmap_get_reg_stride(priv->map)) + regmap_write(priv->map, offset, 0); + + return 0; +} + +static int axg_spdifout_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + unsigned int rate = params_rate(params); + int ret; + + /* 2 * 32bits per subframe * 2 channels = 128 */ + ret = clk_set_rate(priv->mclk, rate * 128); + if (ret) { + dev_err(dai->dev, "failed to set spdif clock\n"); + return ret; + } + + ret = axg_spdifout_sample_fmt(params, dai); + if (ret) { + dev_err(dai->dev, "failed to setup sample format\n"); + return ret; + } + + ret = axg_spdifout_set_chsts(params, dai); + if (ret) { + dev_err(dai->dev, "failed to setup channel status words\n"); + return ret; + } + + return 0; +} + +static int axg_spdifout_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + int ret; + + /* Clock the spdif output block */ + ret = clk_prepare_enable(priv->pclk); + if (ret) { + dev_err(dai->dev, "failed to enable pclk\n"); + return ret; + } + + /* Make sure the block is initially stopped */ + axg_spdifout_disable(priv->map); + + /* Insert data from bit 27 lsb first */ + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_MSB_FIRST | SPDIFOUT_CTRL0_DATA_SEL, + 0); + + /* Manual control of V, C and U, U = 0 */ + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_CHSTS_SEL | SPDIFOUT_CTRL0_VSEL | + SPDIFOUT_CTRL0_USEL | SPDIFOUT_CTRL0_USET, + 0); + + /* Static SWAP configuration ATM */ + regmap_write(priv->map, SPDIFOUT_SWAP, 0x10); + + return 0; +} + +static void axg_spdifout_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + + clk_disable_unprepare(priv->pclk); +} + +static const struct snd_soc_dai_ops axg_spdifout_ops = { + .trigger = axg_spdifout_trigger, + .digital_mute = axg_spdifout_digital_mute, + .hw_params = axg_spdifout_hw_params, + .startup = axg_spdifout_startup, + .shutdown = axg_spdifout_shutdown, +}; + +static struct snd_soc_dai_driver axg_spdifout_dai_drv[] = { + { + .name = "SPDIF Output", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = (SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000), + .formats = (SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S20_LE | + SNDRV_PCM_FMTBIT_S24_LE), + }, + .ops = &axg_spdifout_ops, + }, +}; + +static const char * const spdifout_sel_texts[] = { + "IN 0", "IN 1", "IN 2", +}; + +static SOC_ENUM_SINGLE_DECL(axg_spdifout_sel_enum, SPDIFOUT_CTRL1, 24, + spdifout_sel_texts); + +static const struct snd_kcontrol_new axg_spdifout_in_mux = + SOC_DAPM_ENUM("Input Source", axg_spdifout_sel_enum); + +static const struct snd_soc_dapm_widget axg_spdifout_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &axg_spdifout_in_mux), +}; + +static const struct snd_soc_dapm_route axg_spdifout_dapm_routes[] = { + { "SRC SEL", "IN 0", "IN 0" }, + { "SRC SEL", "IN 1", "IN 1" }, + { "SRC SEL", "IN 2", "IN 2" }, + { "Playback", NULL, "SRC SEL" }, +}; + +static const struct snd_kcontrol_new axg_spdifout_controls[] = { + SOC_DOUBLE("Playback Volume", SPDIFOUT_GAIN0, 0, 8, 255, 0), + SOC_DOUBLE("Playback Switch", SPDIFOUT_CTRL0, 22, 21, 1, 1), + SOC_SINGLE("Playback Gain Enable Switch", + SPDIFOUT_CTRL1, 26, 1, 0), + SOC_SINGLE("Playback Channels Mix Switch", + SPDIFOUT_CTRL0, 23, 1, 0), +}; + +static int axg_spdifout_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct axg_spdifout *priv = snd_soc_component_get_drvdata(component); + enum snd_soc_bias_level now = + snd_soc_component_get_bias_level(component); + int ret = 0; + + switch (level) { + case SND_SOC_BIAS_PREPARE: + if (now == SND_SOC_BIAS_STANDBY) + ret = clk_prepare_enable(priv->mclk); + break; + + case SND_SOC_BIAS_STANDBY: + if (now == SND_SOC_BIAS_PREPARE) + clk_disable_unprepare(priv->mclk); + break; + + case SND_SOC_BIAS_OFF: + case SND_SOC_BIAS_ON: + break; + } + + return ret; +} + +static const struct snd_soc_component_driver axg_spdifout_component_drv = { + .controls = axg_spdifout_controls, + .num_controls = ARRAY_SIZE(axg_spdifout_controls), + .dapm_widgets = axg_spdifout_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(axg_spdifout_dapm_widgets), + .dapm_routes = axg_spdifout_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(axg_spdifout_dapm_routes), + .set_bias_level = axg_spdifout_set_bias_level, +}; + +static const struct regmap_config axg_spdifout_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = SPDIFOUT_MUTE_VAL, +}; + +static const struct of_device_id axg_spdifout_of_match[] = { + { .compatible = "amlogic,axg-spdifout", }, + {} +}; +MODULE_DEVICE_TABLE(of, axg_spdifout_of_match); + +static int axg_spdifout_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct axg_spdifout *priv; + struct resource *res; + void __iomem *regs; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + platform_set_drvdata(pdev, priv); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + priv->map = devm_regmap_init_mmio(dev, regs, &axg_spdifout_regmap_cfg); + if (IS_ERR(priv->map)) { + dev_err(dev, "failed to init regmap: %ld\n", + PTR_ERR(priv->map)); + return PTR_ERR(priv->map); + } + + priv->pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(priv->pclk)) { + ret = PTR_ERR(priv->pclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get pclk: %d\n", ret); + return ret; + } + + priv->mclk = devm_clk_get(dev, "mclk"); + if (IS_ERR(priv->mclk)) { + ret = PTR_ERR(priv->mclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get mclk: %d\n", ret); + return ret; + } + + return devm_snd_soc_register_component(dev, &axg_spdifout_component_drv, + axg_spdifout_dai_drv, ARRAY_SIZE(axg_spdifout_dai_drv)); +} + +static struct platform_driver axg_spdifout_pdrv = { + .probe = axg_spdifout_probe, + .driver = { + .name = "axg-spdifout", + .of_match_table = axg_spdifout_of_match, + }, +}; +module_platform_driver(axg_spdifout_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG SPDIF Output driver"); +MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); +MODULE_LICENSE("GPL v2"); |