diff options
Diffstat (limited to 'sound/pci')
| -rw-r--r-- | sound/pci/ca0106/ca0106_proc.c | 2 | ||||
| -rw-r--r-- | sound/pci/cs46xx/imgs/cwcdma.asp | 9 | ||||
| -rw-r--r-- | sound/pci/emu10k1/emu10k1x.c | 2 | ||||
| -rw-r--r-- | sound/pci/hda/patch_cirrus.c | 2 | ||||
| -rw-r--r-- | sound/pci/hda/patch_cmedia.c | 2 | ||||
| -rw-r--r-- | sound/pci/hda/patch_realtek.c | 2 | ||||
| -rw-r--r-- | sound/pci/ice1712/juli.c | 2 | ||||
| -rw-r--r-- | sound/pci/rme9652/hdspm.c | 4 |
8 files changed, 13 insertions, 12 deletions
diff --git a/sound/pci/ca0106/ca0106_proc.c b/sound/pci/ca0106/ca0106_proc.c index 15523e60351c..0470461cc03e 100644 --- a/sound/pci/ca0106/ca0106_proc.c +++ b/sound/pci/ca0106/ca0106_proc.c @@ -233,7 +233,7 @@ static void snd_ca0106_proc_dump_iec958( struct snd_info_buffer *buffer, u32 val snd_iprintf(buffer, "user-defined\n"); break; default: - snd_iprintf(buffer, "unkown\n"); + snd_iprintf(buffer, "unknown\n"); break; } snd_iprintf(buffer, "Sample Bits: "); diff --git a/sound/pci/cs46xx/imgs/cwcdma.asp b/sound/pci/cs46xx/imgs/cwcdma.asp index 09d24c76f034..a65e1193c89a 100644 --- a/sound/pci/cs46xx/imgs/cwcdma.asp +++ b/sound/pci/cs46xx/imgs/cwcdma.asp @@ -26,10 +26,11 @@ // // // The purpose of this code is very simple: make it possible to tranfser -// the samples 'as they are' with no alteration from a PCMreader SCB (DMA from host) -// to any other SCB. This is useful for AC3 throug SPDIF. SRC (source rate converters) -// task always alters the samples in some how, however it's from 48khz -> 48khz. The -// alterations are not audible, but AC3 wont work. +// the samples 'as they are' with no alteration from a PCMreader +// SCB (DMA from host) to any other SCB. This is useful for AC3 through SPDIF. +// SRC (source rate converters) task always alters the samples in somehow, +// however it's from 48khz -> 48khz. +// The alterations are not audible, but AC3 wont work. // // ... // | diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c index 6b8ae7b5cd54..1d369ff73805 100644 --- a/sound/pci/emu10k1/emu10k1x.c +++ b/sound/pci/emu10k1/emu10k1x.c @@ -184,7 +184,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard."); * The hardware has 3 channels for playback and 1 for capture. * - channel 0 is the front channel * - channel 1 is the rear channel - * - channel 2 is the center/lfe chanel + * - channel 2 is the center/lfe channel * Volume is controlled by the AC97 for the front and rear channels by * the PCM Playback Volume, Sigmatel Surround Playback Volume and * Surround Playback Volume. The Sigmatel 4-Speaker Stereo switch affects diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 2439e84dcb21..4b200da1bd18 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -938,7 +938,7 @@ static void init_input(struct hda_codec *codec) coef |= 0x0500; /* DMIC2 enable 2 channels, disable GPIO1 */ if (is_active_pin(codec, CS_DMIC1_PIN_NID)) coef |= 0x1800; /* DMIC1 enable 2 channels, disable GPIO0 - * No effect if SPDIF_OUT2 is slected in + * No effect if SPDIF_OUT2 is selected in * IDX_SPDIF_CTL. */ cs_vendor_coef_set(codec, IDX_ADC_CFG, coef); diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index 85c81feb10cf..a45c1169762b 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -66,7 +66,7 @@ struct cmi_spec { struct hda_pcm pcm_rec[2]; /* PCM information */ - /* pin deafault configuration */ + /* pin default configuration */ hda_nid_t pin_nid[NUM_PINS]; unsigned int def_conf[NUM_PINS]; unsigned int pin_def_confs; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index deecdd2d5d37..888b6313eeca 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6621,7 +6621,7 @@ static struct hda_input_mux alc889A_mb31_capture_source = { /* Front Mic (0x01) unused */ { "Line", 0x2 }, /* Line 2 (0x03) unused */ - /* CD (0x04) unsused? */ + /* CD (0x04) unused? */ }, }; diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c index 0c9413d5341b..98bc3b7681b5 100644 --- a/sound/pci/ice1712/juli.c +++ b/sound/pci/ice1712/juli.c @@ -380,7 +380,7 @@ static struct snd_kcontrol_new juli_mute_controls[] __devinitdata = { * inputs) are fed from Xilinx. * * I even checked traces on board and coded a support in driver for - * an alternative possiblity - the unused I2S ICE output channels + * an alternative possibility - the unused I2S ICE output channels * switched to HW-IN/SPDIF-IN and providing the monitoring signal to * the DAC - to no avail. The I2S outputs seem to be unconnected. * diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 0dce331a2a3b..a1b10d1a384d 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -3017,7 +3017,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry, insel = "Coaxial"; break; default: - insel = "Unkown"; + insel = "Unknown"; } switch (hdspm->control_register & HDSPM_SyncRefMask) { @@ -3028,7 +3028,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry, syncref = "MADI"; break; default: - syncref = "Unkown"; + syncref = "Unknown"; } snd_iprintf(buffer, "Inputsel = %s, SyncRef = %s\n", insel, syncref); |