diff options
Diffstat (limited to 'scripts')
| -rw-r--r-- | scripts/Kbuild.include | 7 | ||||
| -rw-r--r-- | scripts/Makefile.asm-generic | 4 | ||||
| -rw-r--r-- | scripts/Makefile.build | 25 | ||||
| -rw-r--r-- | scripts/Makefile.dtbinst | 4 | ||||
| -rw-r--r-- | scripts/Makefile.lib | 8 | ||||
| -rw-r--r-- | scripts/basic/Makefile | 2 | ||||
| -rw-r--r-- | scripts/basic/fixdep.c | 6 | ||||
| -rw-r--r-- | scripts/dtc/checks.c | 2 | ||||
| -rwxr-xr-x | scripts/dtc/dtx_diff | 2 | ||||
| -rwxr-xr-x | scripts/get_maintainer.pl | 91 | ||||
| -rwxr-xr-x | scripts/kernel-doc | 4 | ||||
| -rw-r--r-- | scripts/mod/modpost.c | 27 | ||||
| -rw-r--r-- | scripts/parse-maintainers.pl | 97 | ||||
| -rwxr-xr-x | scripts/sphinx-pre-install | 609 |
14 files changed, 798 insertions, 90 deletions
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index dd8e2dde0b34..9ffd3dda3889 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -85,8 +85,8 @@ TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/) # try-run # Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise) -# Exit code chooses option. "$$TMP" is can be used as temporary file and -# is automatically cleaned up. +# Exit code chooses option. "$$TMP" serves as a temporary file and is +# automatically cleaned up. try-run = $(shell set -e; \ TMP="$(TMPOUT).$$$$.tmp"; \ TMPO="$(TMPOUT).$$$$.o"; \ @@ -261,7 +261,6 @@ make-cmd = $(call escsq,$(subst \#,\\\#,$(subst $$,$$$$,$(cmd_$(1))))) any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^) # Execute command if command has changed or prerequisite(s) are updated. -# if_changed = $(if $(strip $(any-prereq) $(arg-check)), \ @set -e; \ $(echo-cmd) $(cmd_$(1)); \ @@ -315,7 +314,7 @@ if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \ $(rule_$(1)), @:) ### -# why - tell why a a target got build +# why - tell why a target got built # enabled by make V=2 # Output (listed in the order they are checked): # (1) - due to target is PHONY diff --git a/scripts/Makefile.asm-generic b/scripts/Makefile.asm-generic index 95f7d8090152..a6c8c1780855 100644 --- a/scripts/Makefile.asm-generic +++ b/scripts/Makefile.asm-generic @@ -1,9 +1,9 @@ # include/asm-generic contains a lot of files that are used # verbatim by several architectures. # -# This Makefile reads the file arch/$(SRCARCH)/include/asm/Kbuild +# This Makefile reads the file arch/$(SRCARCH)/include/$(src)/Kbuild # and for each file listed in this file with generic-y creates -# a small wrapper file in $(obj) (arch/$(SRCARCH)/include/generated/asm) +# a small wrapper file in $(obj) (arch/$(SRCARCH)/include/generated/$(src)) kbuild-file := $(srctree)/arch/$(SRCARCH)/include/$(src)/Kbuild -include $(kbuild-file) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 4a9a2cec0a1b..2e3a10e79ca9 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -229,8 +229,8 @@ ifeq ("$(origin RECORDMCOUNT_WARN)", "command line") endif # Due to recursion, we must skip empty.o. # The empty.o file is created in the make process in order to determine -# the target endianness and word size. It is made before all other C -# files, including recordmcount. +# the target endianness and word size. It is made before all other C +# files, including recordmcount. sub_cmd_record_mcount = \ if [ $(@) != "scripts/mod/empty.o" ]; then \ $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \ @@ -245,23 +245,27 @@ sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ "$(if $(part-of-module),1,0)" "$(@)"; recordmcount_source := $(srctree)/scripts/recordmcount.pl -endif +endif # BUILD_C_RECORDMCOUNT cmd_record_mcount = \ if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \ "$(CC_FLAGS_FTRACE)" ]; then \ $(sub_cmd_record_mcount) \ fi; -endif +endif # CONFIG_FTRACE_MCOUNT_RECORD ifdef CONFIG_STACK_VALIDATION ifneq ($(SKIP_STACK_VALIDATION),1) __objtool_obj := $(objtree)/tools/objtool/objtool -objtool_args = check +objtool_args = $(if $(CONFIG_ORC_UNWINDER),orc generate,check) + ifndef CONFIG_FRAME_POINTER objtool_args += --no-fp endif +ifdef CONFIG_GCOV_KERNEL +objtool_args += --no-unreachable +endif # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file @@ -276,6 +280,11 @@ objtool_obj = $(if $(patsubst y%,, \ endif # SKIP_STACK_VALIDATION endif # CONFIG_STACK_VALIDATION +# Rebuild all objects when objtool changes, or is enabled/disabled. +objtool_dep = $(objtool_obj) \ + $(wildcard include/config/orc/unwinder.h \ + include/config/stack/validation.h) + define rule_cc_o_c $(call echo-cmd,checksrc) $(cmd_checksrc) \ $(call cmd_and_fixdep,cc_o_c) \ @@ -298,13 +307,13 @@ cmd_undef_syms = echo endif # Built-in and composite module parts -$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_obj) FORCE +$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE $(call cmd,force_checksrc) $(call if_changed_rule,cc_o_c) # Single-part modules are special since we need to mark them in $(MODVERDIR) -$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_obj) FORCE +$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE $(call cmd,force_checksrc) $(call if_changed_rule,cc_o_c) @{ echo $(@:.o=.ko); echo $@; \ @@ -399,7 +408,7 @@ cmd_modversions_S = \ endif endif -$(obj)/%.o: $(src)/%.S $(objtool_obj) FORCE +$(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE $(call if_changed_rule,as_o_S) targets += $(real-objs-y) $(real-objs-m) $(lib-y) diff --git a/scripts/Makefile.dtbinst b/scripts/Makefile.dtbinst index 34614a48b717..993fb85982df 100644 --- a/scripts/Makefile.dtbinst +++ b/scripts/Makefile.dtbinst @@ -14,7 +14,7 @@ src := $(obj) PHONY := __dtbs_install __dtbs_install: -export dtbinst-root ?= $(obj) +export dtbinst_root ?= $(obj) include include/config/auto.conf include scripts/Kbuild.include @@ -27,7 +27,7 @@ dtbinst-dirs := $(dts-dirs) quiet_cmd_dtb_install = INSTALL $< cmd_dtb_install = mkdir -p $(2); cp $< $(2) -install-dir = $(patsubst $(dtbinst-root)%,$(INSTALL_DTBS_PATH)%,$(obj)) +install-dir = $(patsubst $(dtbinst_root)%,$(INSTALL_DTBS_PATH)%,$(obj)) $(dtbinst-files): %.dtb: $(obj)/%.dtb $(call cmd,dtb_install,$(install-dir)) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 58c05e5d9870..dcc0d5fdf5a2 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -173,10 +173,10 @@ cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ ld_flags = $(LDFLAGS) $(ldflags-y) +DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes + dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \ - -I$(srctree)/arch/$(SRCARCH)/boot/dts \ - -I$(srctree)/scripts/dtc/include-prefixes \ - -I$(srctree)/drivers/of/testcase-data \ + $(addprefix -I,$(DTC_INCLUDE)) \ -undef -D__DTS__ # Finds the multi-part object the current object will be linked into @@ -317,7 +317,7 @@ quiet_cmd_dtc = DTC $@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(DTC) -O dtb -o $@ -b 0 \ - -i $(dir $<) $(DTC_FLAGS) \ + $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) diff --git a/scripts/basic/Makefile b/scripts/basic/Makefile index ec10d9345bc2..0372b33febe5 100644 --- a/scripts/basic/Makefile +++ b/scripts/basic/Makefile @@ -1,5 +1,5 @@ ### -# Makefile.basic lists the most basic programs used during the build process. +# This Makefile lists the most basic programs used during the build process. # The programs listed herein are what are needed to do the basic stuff, # such as fix file dependencies. # This initial step is needed to avoid files to be recompiled diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c index fff818b92acb..bbf62cb1f819 100644 --- a/scripts/basic/fixdep.c +++ b/scripts/basic/fixdep.c @@ -25,7 +25,7 @@ * * So we play the same trick that "mkdep" played before. We replace * the dependency on autoconf.h by a dependency on every config - * option which is mentioned in any of the listed prequisites. + * option which is mentioned in any of the listed prerequisites. * * kconfig populates a tree in include/config/ with an empty file * for each config symbol and when the configuration is updated @@ -34,7 +34,7 @@ * the config symbols are rebuilt. * * So if the user changes his CONFIG_HIS_DRIVER option, only the objects - * which depend on "include/linux/config/his/driver.h" will be rebuilt, + * which depend on "include/config/his/driver.h" will be rebuilt, * so most likely only his driver ;-) * * The idea above dates, by the way, back to Michael E Chastain, AFAIK. @@ -75,7 +75,7 @@ * and then basically copies the .<target>.d file to stdout, in the * process filtering out the dependency on autoconf.h and adding * dependencies on include/config/my/option.h for every - * CONFIG_MY_OPTION encountered in any of the prequisites. + * CONFIG_MY_OPTION encountered in any of the prerequisites. * * It will also filter out all the dependencies on *.ver. We need * to make sure that the generated version checksum are globally up diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c index 4b72b530c84f..62ea8f83d4a0 100644 --- a/scripts/dtc/checks.c +++ b/scripts/dtc/checks.c @@ -873,7 +873,7 @@ static void check_simple_bus_reg(struct check *c, struct dt_info *dti, struct no while (size--) reg = (reg << 32) | fdt32_to_cpu(*(cells++)); - snprintf(unit_addr, sizeof(unit_addr), "%zx", reg); + snprintf(unit_addr, sizeof(unit_addr), "%llx", (unsigned long long)reg); if (!streq(unitname, unit_addr)) FAIL(c, dti, "Node %s simple-bus unit address format error, expected \"%s\"", node->fullpath, unit_addr); diff --git a/scripts/dtc/dtx_diff b/scripts/dtc/dtx_diff index fb86f3899e16..f9a3d8d23c64 100755 --- a/scripts/dtc/dtx_diff +++ b/scripts/dtc/dtx_diff @@ -321,7 +321,7 @@ fi cpp_flags="\ -nostdinc \ -I${srctree}/arch/${ARCH}/boot/dts \ - -I${srctree}/arch/${ARCH}/boot/dts/include \ + -I${srctree}/scripts/dtc/include-prefixes \ -I${srctree}/drivers/of/testcase-data \ -undef -D__DTS__" diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 3bd5f4f30235..bc443201d3ef 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -18,6 +18,7 @@ my $V = '0.26'; use Getopt::Long qw(:config no_auto_abbrev); use Cwd; +use File::Find; my $cur_path = fastgetcwd() . '/'; my $lk_path = "./"; @@ -58,6 +59,7 @@ my $from_filename = 0; my $pattern_depth = 0; my $version = 0; my $help = 0; +my $find_maintainer_files = 0; my $vcs_used = 0; @@ -249,6 +251,7 @@ if (!GetOptions( 'sections!' => \$sections, 'fe|file-emails!' => \$file_emails, 'f|file' => \$from_filename, + 'find-maintainer-files' => \$find_maintainer_files, 'v|version' => \$version, 'h|help|usage' => \$help, )) { @@ -307,36 +310,74 @@ if (!top_of_kernel_tree($lk_path)) { my @typevalue = (); my %keyword_hash; +my @mfiles = (); -open (my $maint, '<', "${lk_path}MAINTAINERS") - or die "$P: Can't open MAINTAINERS: $!\n"; -while (<$maint>) { - my $line = $_; - - if ($line =~ m/^([A-Z]):\s*(.*)/) { - my $type = $1; - my $value = $2; - - ##Filename pattern matching - if ($type eq "F" || $type eq "X") { - $value =~ s@\.@\\\.@g; ##Convert . to \. - $value =~ s/\*/\.\*/g; ##Convert * to .* - $value =~ s/\?/\./g; ##Convert ? to . - ##if pattern is a directory and it lacks a trailing slash, add one - if ((-d $value)) { - $value =~ s@([^/])$@$1/@; +sub read_maintainer_file { + my ($file) = @_; + + open (my $maint, '<', "$file") + or die "$P: Can't open MAINTAINERS file '$file': $!\n"; + while (<$maint>) { + my $line = $_; + + if ($line =~ m/^([A-Z]):\s*(.*)/) { + my $type = $1; + my $value = $2; + + ##Filename pattern matching + if ($type eq "F" || $type eq "X") { + $value =~ s@\.@\\\.@g; ##Convert . to \. + $value =~ s/\*/\.\*/g; ##Convert * to .* + $value =~ s/\?/\./g; ##Convert ? to . + ##if pattern is a directory and it lacks a trailing slash, add one + if ((-d $value)) { + $value =~ s@([^/])$@$1/@; + } + } elsif ($type eq "K") { + $keyword_hash{@typevalue} = $value; } - } elsif ($type eq "K") { - $keyword_hash{@typevalue} = $value; + push(@typevalue, "$type:$value"); + } elsif (!(/^\s*$/ || /^\s*\#/)) { + $line =~ s/\n$//g; + push(@typevalue, $line); } - push(@typevalue, "$type:$value"); - } elsif (!/^(\s)*$/) { - $line =~ s/\n$//g; - push(@typevalue, $line); } + close($maint); +} + +sub find_is_maintainer_file { + my ($file) = $_; + return if ($file !~ m@/MAINTAINERS$@); + $file = $File::Find::name; + return if (! -f $file); + push(@mfiles, $file); } -close($maint); +sub find_ignore_git { + return grep { $_ !~ /^\.git$/; } @_; +} + +if (-d "${lk_path}MAINTAINERS") { + opendir(DIR, "${lk_path}MAINTAINERS") or die $!; + my @files = readdir(DIR); + closedir(DIR); + foreach my $file (@files) { + push(@mfiles, "${lk_path}MAINTAINERS/$file") if ($file !~ /^\./); + } +} + +if ($find_maintainer_files) { + find( { wanted => \&find_is_maintainer_file, + preprocess => \&find_ignore_git, + no_chdir => 1, + }, "${lk_path}"); +} else { + push(@mfiles, "${lk_path}MAINTAINERS") if -f "${lk_path}MAINTAINERS"; +} + +foreach my $file (@mfiles) { + read_maintainer_file("$file"); +} # # Read mail address map @@ -873,7 +914,7 @@ sub top_of_kernel_tree { if ( (-f "${lk_path}COPYING") && (-f "${lk_path}CREDITS") && (-f "${lk_path}Kbuild") - && (-f "${lk_path}MAINTAINERS") + && (-e "${lk_path}MAINTAINERS") && (-f "${lk_path}Makefile") && (-f "${lk_path}README") && (-d "${lk_path}Documentation") diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 6e36b7889001..9d3eafea58f0 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -2226,6 +2226,7 @@ sub dump_enum($$) { if ($x =~ /enum\s+(\w+)\s*{(.*)}/) { $declaration_name = $1; my $members = $2; + $members =~ s/\s+$//; foreach my $arg (split ',', $members) { $arg =~ s/^\s*(\w+).*/$1/; @@ -2766,6 +2767,9 @@ sub process_proto_type($$) { while (1) { if ( $x =~ /([^{};]*)([{};])(.*)/ ) { + if( length $prototype ) { + $prototype .= " " + } $prototype .= $1 . $2; ($2 eq '{') && $brcount++; ($2 eq '}') && $brcount--; diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 48397feb08fb..b920d186ad4a 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -261,7 +261,17 @@ static enum export export_no(const char *s) return export_unknown; } -static const char *sec_name(struct elf_info *elf, int secindex); +static const char *sech_name(struct elf_info *elf, Elf_Shdr *sechdr) +{ + return (void *)elf->hdr + + elf->sechdrs[elf->secindex_strings].sh_offset + + sechdr->sh_name; +} + +static const char *sec_name(struct elf_info *elf, int secindex) +{ + return sech_name(elf, &elf->sechdrs[secindex]); +} #define strstarts(str, prefix) (strncmp(str, prefix, strlen(prefix)) == 0) @@ -775,21 +785,6 @@ static const char *sym_name(struct elf_info *elf, Elf_Sym *sym) return "(unknown)"; } -static const char *sec_name(struct elf_info *elf, int secindex) -{ - Elf_Shdr *sechdrs = elf->sechdrs; - return (void *)elf->hdr + - elf->sechdrs[elf->secindex_strings].sh_offset + - sechdrs[secindex].sh_name; -} - -static const char *sech_name(struct elf_info *elf, Elf_Shdr *sechdr) -{ - return (void *)elf->hdr + - elf->sechdrs[elf->secindex_strings].sh_offset + - sechdr->sh_name; -} - /* The pattern is an array of simple patterns. * "foo" will match an exact string equal to "foo" * "*foo" will match a string that ends with "foo" diff --git a/scripts/parse-maintainers.pl b/scripts/parse-maintainers.pl index a0fe34349b24..e40b53db7f9f 100644 --- a/scripts/parse-maintainers.pl +++ b/scripts/parse-maintainers.pl @@ -2,9 +2,9 @@ use strict; -my %map; +my $P = $0; -# sort comparison function +# sort comparison functions sub by_category($$) { my ($a, $b) = @_; @@ -15,20 +15,33 @@ sub by_category($$) { $a =~ s/THE REST/ZZZZZZ/g; $b =~ s/THE REST/ZZZZZZ/g; - $a cmp $b; + return $a cmp $b; } -sub alpha_output { - my $key; - my $sort_method = \&by_category; - my $sep = ""; - - foreach $key (sort $sort_method keys %map) { - if ($key ne " ") { - print $sep . $key . "\n"; - $sep = "\n"; - } - print $map{$key}; +sub by_pattern($$) { + my ($a, $b) = @_; + my $preferred_order = 'MRPLSWTQBCFXNK'; + + my $a1 = uc(substr($a, 0, 1)); + my $b1 = uc(substr($b, 0, 1)); + + my $a_index = index($preferred_order, $a1); + my $b_index = index($preferred_order, $b1); + + $a_index = 1000 if ($a_index == -1); + $b_index = 1000 if ($b_index == -1); + + if (($a1 =~ /^F$/ && $b1 =~ /^F$/) || + ($a1 =~ /^X$/ && $b1 =~ /^X$/)) { + return $a cmp $b; + } + + if ($a_index < $b_index) { + return -1; + } elsif ($a_index == $b_index) { + return 0; + } else { + return 1; } } @@ -39,39 +52,77 @@ sub trim { return $s; } +sub alpha_output { + my ($hashref, $filename) = (@_); + + open(my $file, '>', "$filename") or die "$P: $filename: open failed - $!\n"; + foreach my $key (sort by_category keys %$hashref) { + if ($key eq " ") { + chomp $$hashref{$key}; + print $file $$hashref{$key}; + } else { + print $file "\n" . $key . "\n"; + foreach my $pattern (sort by_pattern split('\n', %$hashref{$key})) { + print $file ($pattern . "\n"); + } + } + } + close($file); +} + sub file_input { + my ($hashref, $filename) = (@_); + my $lastline = ""; my $case = " "; - $map{$case} = ""; + $$hashref{$case} = ""; + + open(my $file, '<', "$filename") or die "$P: $filename: open failed - $!\n"; - while (<>) { + while (<$file>) { my $line = $_; # Pattern line? if ($line =~ m/^([A-Z]):\s*(.*)/) { $line = $1 . ":\t" . trim($2) . "\n"; if ($lastline eq "") { - $map{$case} = $map{$case} . $line; + $$hashref{$case} = $$hashref{$case} . $line; next; } $case = trim($lastline); - exists $map{$case} and die "Header '$case' already exists"; - $map{$case} = $line; + exists $$hashref{$case} and die "Header '$case' already exists"; + $$hashref{$case} = $line; $lastline = ""; next; } if ($case eq " ") { - $map{$case} = $map{$case} . $lastline; + $$hashref{$case} = $$hashref{$case} . $lastline; $lastline = $line; next; } trim($lastline) eq "" or die ("Odd non-pattern line '$lastline' for '$case'"); $lastline = $line; } - $map{$case} = $map{$case} . $lastline; + $$hashref{$case} = $$hashref{$case} . $lastline; + close($file); } -&file_input; -&alpha_output; +my %hash; +my %new_hash; + +file_input(\%hash, "MAINTAINERS"); + +foreach my $type (@ARGV) { + foreach my $key (keys %hash) { + if ($key =~ /$type/ || $hash{$key} =~ /$type/) { + $new_hash{$key} = $hash{$key}; + delete $hash{$key}; + } + } +} + +alpha_output(\%hash, "MAINTAINERS.new"); +alpha_output(\%new_hash, "SECTION.new"); + exit(0); diff --git a/scripts/sphinx-pre-install b/scripts/sphinx-pre-install new file mode 100755 index 000000000000..677756ae34c9 --- /dev/null +++ b/scripts/sphinx-pre-install @@ -0,0 +1,609 @@ +#!/usr/bin/perl +use strict; + +# Copyright (c) 2017 Mauro Carvalho Chehab <mchehab@kernel.org> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +my $virtenv_dir = "sphinx_1.4"; +my $requirement_file = "Documentation/sphinx/requirements.txt"; + +# +# Static vars +# + +my %missing; +my $system_release; +my $need = 0; +my $optional = 0; +my $need_symlink = 0; +my $need_sphinx = 0; +my $install = ""; + +# +# Command line arguments +# + +my $pdf = 1; +my $virtualenv = 1; + +# +# List of required texlive packages on Fedora and OpenSuse +# + +my %texlive = ( + 'adjustbox.sty' => 'texlive-adjustbox', + 'amsfonts.sty' => 'texlive-amsfonts', + 'amsmath.sty' => 'texlive-amsmath', + 'amssymb.sty' => 'texlive-amsfonts', + 'amsthm.sty' => 'texlive-amscls', + 'anyfontsize.sty' => 'texlive-anyfontsize', + 'atbegshi.sty' => 'texlive-oberdiek', + 'bm.sty' => 'texlive-tools', + 'capt-of.sty' => 'texlive-capt-of', + 'cmap.sty' => 'texlive-cmap', + 'ecrm1000.tfm' => 'texlive-ec', + 'eqparbox.sty' => 'texlive-eqparbox', + 'eu1enc.def' => 'texlive-euenc', + 'fancybox.sty' => 'texlive-fancybox', + 'fancyvrb.sty' => 'texlive-fancyvrb', + 'float.sty' => 'texlive-float', + 'fncychap.sty' => 'texlive-fncychap', + 'footnote.sty' => 'texlive-mdwtools', + 'framed.sty' => 'texlive-framed', + 'luatex85.sty' => 'texlive-luatex85', + 'multirow.sty' => 'texlive-multirow', + 'needspace.sty' => 'texlive-needspace', + 'palatino.sty' => 'texlive-psnfss', + 'parskip.sty' => 'texlive-parskip', + 'polyglossia.sty' => 'texlive-polyglossia', + 'tabulary.sty' => 'texlive-tabulary', + 'threeparttable.sty' => 'texlive-threeparttable', + 'titlesec.sty' => 'texlive-titlesec', + 'ucs.sty' => 'texlive-ucs', + 'upquote.sty' => 'texlive-upquote', + 'wrapfig.sty' => 'texlive-wrapfig', +); + +# +# Subroutines that checks if a feature exists +# + +sub check_missing(%) +{ + my %map = %{$_[0]}; + + foreach my $prog (sort keys %missing) { + my $is_optional = $missing{$prog}; + + if ($is_optional) { + print "Warning: better to also install \"$prog\".\n"; + } else { + print "ERROR: please install \"$prog\", otherwise, build won't work.\n"; + } + if (defined($map{$prog})) { + $install .= " " . $map{$prog}; + } else { + $install .= " " . $prog; + } + } + + $install =~ s/^\s//; +} + +sub add_package($$) +{ + my $package = shift; + my $is_optional = shift; + + $missing{$package} = $is_optional; + if ($is_optional) { + $optional++; + } else { + $need++; + } +} + +sub check_missing_file($$$) +{ + my $file = shift; + my $package = shift; + my $is_optional = shift; + + return if(-e $file); + + add_package($package, $is_optional); +} + +sub findprog($) +{ + foreach(split(/:/, $ENV{PATH})) { + return "$_/$_[0]" if(-x "$_/$_[0]"); + } +} + +sub check_program($$) +{ + my $prog = shift; + my $is_optional = shift; + + return if findprog($prog); + + add_package($prog, $is_optional); +} + +sub check_perl_module($$) +{ + my $prog = shift; + my $is_optional = shift; + + my $err = system("perl -M$prog -e 1 2>/dev/null /dev/null"); + return if ($err == 0); + + add_package($prog, $is_optional); +} + +sub check_python_module($$) +{ + my $prog = shift; + my $is_optional = shift; + + my $err = system("python3 -c 'import $prog' 2>/dev/null /dev/null"); + return if ($err == 0); + my $err = system("python -c 'import $prog' 2>/dev/null /dev/null"); + return if ($err == 0); + + add_package($prog, $is_optional); +} + +sub check_rpm_missing($$) +{ + my @pkgs = @{$_[0]}; + my $is_optional = $_[1]; + + foreach my $prog(@pkgs) { + my $err = system("rpm -q '$prog' 2>/dev/null >/dev/null"); + add_package($prog, $is_optional) if ($err); + } +} + +sub check_pacman_missing($$) +{ + my @pkgs = @{$_[0]}; + my $is_optional = $_[1]; + + foreach my $prog(@pkgs) { + my $err = system("pacman -Q '$prog' 2>/dev/null >/dev/null"); + add_package($prog, $is_optional) if ($err); + } +} + +sub check_missing_tex($) +{ + my $is_optional = shift; + my $kpsewhich = findprog("kpsewhich"); + + foreach my $prog(keys %texlive) { + my $package = $texlive{$prog}; + if (!$kpsewhich) { + add_package($package, $is_optional); + next; + } + my $file = qx($kpsewhich $prog); + add_package($package, $is_optional) if ($file =~ /^\s*$/); + } +} + +sub check_sphinx() +{ + return if findprog("sphinx-build"); + + if (findprog("sphinx-build-3")) { + $need_symlink = 1; + return; + } + + if ($virtualenv) { + my $prog = findprog("virtualenv-3"); + $prog = findprog("virtualenv-3.5") if (!$prog); + + check_program("virtualenv", 0) if (!$prog); + $need_sphinx = 1; + } else { + add_package("python-sphinx", 0); + } +} + +# +# Ancillary subroutines +# + +sub catcheck($) +{ + my $res = ""; + $res = qx(cat $_[0]) if (-r $_[0]); + return $res; +} + +sub which($) +{ + my $file = shift; + my @path = split ":", $ENV{PATH}; + + foreach my $dir(@path) { + my $name = $dir.'/'.$file; + return $name if (-x $name ); + } + return undef; +} + +# +# Subroutines that check distro-specific hints +# + +sub give_debian_hints() +{ + my %map = ( + "python-sphinx" => "python3-sphinx", + "sphinx_rtd_theme" => "python3-sphinx-rtd-theme", + "virtualenv" => "virtualenv", + "dot" => "graphviz", + "convert" => "imagemagick", + "Pod::Usage" => "perl-modules", + "xelatex" => "texlive-xetex", + "rsvg-convert" => "librsvg2-bin", + ); + + if ($pdf) { + check_missing_file("/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf", + "fonts-dejavu", 1); + } + + check_program("dvipng", 1) if ($pdf); + check_missing(\%map); + + return if (!$need && !$optional); + printf("You should run:\n\n\tsudo apt-get install $install\n"); +} + +sub give_redhat_hints() +{ + my %map = ( + "python-sphinx" => "python3-sphinx", + "sphinx_rtd_theme" => "python3-sphinx_rtd_theme", + "virtualenv" => "python3-virtualenv", + "dot" => "graphviz", + "convert" => "ImageMagick", + "Pod::Usage" => "perl-Pod-Usage", + "xelatex" => "texlive-xetex-bin", + "rsvg-convert" => "librsvg2-tools", + ); + + my @fedora26_opt_pkgs = ( + "graphviz-gd", # Fedora 26: needed for PDF support + ); + + my @fedora_tex_pkgs = ( + "texlive-collection-fontsrecommended", + "texlive-collection-latex", + "dejavu-sans-fonts", + "dejavu-serif-fonts", + "dejavu-sans-mono-fonts", + ); + + # + # Checks valid for RHEL/CentOS version 7.x. + # + if (! $system_release =~ /Fedora/) { + $map{"virtualenv"} = "python-virtualenv"; + } + + my $release; + + $release = $1 if ($system_release =~ /Fedora\s+release\s+(\d+)/); + + check_rpm_missing(\@fedora26_opt_pkgs, 1) if ($pdf && $release >= 26); + check_rpm_missing(\@fedora_tex_pkgs, 1) if ($pdf); + check_missing_tex(1) if ($pdf); + check_missing(\%map); + + return if (!$need && !$optional); + + if ($release >= 18) { + # dnf, for Fedora 18+ + printf("You should run:\n\n\tsudo dnf install -y $install\n"); + } else { + # yum, for RHEL (and clones) or Fedora version < 18 + printf("You should run:\n\n\tsudo yum install -y $install\n"); + } +} + +sub give_opensuse_hints() +{ + my %map = ( + "python-sphinx" => "python3-sphinx", + "sphinx_rtd_theme" => "python3-sphinx_rtd_theme", + "virtualenv" => "python3-virtualenv", + "dot" => "graphviz", + "convert" => "ImageMagick", + "Pod::Usage" => "perl-Pod-Usage", + "xelatex" => "texlive-xetex-bin", + "rsvg-convert" => "rsvg-view", + ); + + my @suse_tex_pkgs = ( + "texlive-babel-english", + "texlive-caption", + "texlive-colortbl", + "texlive-courier", + "texlive-dvips", + "texlive-helvetic", + "texlive-makeindex", + "texlive-metafont", + "texlive-metapost", + "texlive-palatino", + "texlive-preview", + "texlive-times", + "texlive-zapfchan", + "texlive-zapfding", + ); + + check_rpm_missing(\@suse_tex_pkgs, 1) if ($pdf); + check_missing_tex(1) if ($pdf); + check_missing(\%map); + + return if (!$need && !$optional); + printf("You should run:\n\n\tsudo zypper install --no-recommends $install\n"); +} + +sub give_mageia_hints() +{ + my %map = ( + "python-sphinx" => "python3-sphinx", + "sphinx_rtd_theme" => "python3-sphinx_rtd_theme", + "virtualenv" => "python3-virtualenv", + "dot" => "graphviz", + "convert" => "ImageMagick", + "Pod::Usage" => "perl-Pod-Usage", + "xelatex" => "texlive", + "rsvg-convert" => "librsvg2-tools", + ); + + my @tex_pkgs = ( + "texlive-fontsextra", + ); + + check_rpm_missing(\@tex_pkgs, 1) if ($pdf); + check_missing(\%map); + + return if (!$need && !$optional); + printf("You should run:\n\n\tsudo urpmi $install\n"); +} + +sub give_arch_linux_hints() +{ + my %map = ( + "sphinx_rtd_theme" => "python-sphinx_rtd_theme", + "virtualenv" => "python-virtualenv", + "dot" => "graphviz", + "convert" => "imagemagick", + "xelatex" => "texlive-bin", + "rsvg-convert" => "extra/librsvg", + ); + + my @archlinux_tex_pkgs = ( + "texlive-core", + "texlive-latexextra", + "ttf-dejavu", + ); + check_pacman_missing(\@archlinux_tex_pkgs, 1) if ($pdf); + check_missing(\%map); + + return if (!$need && !$optional); + printf("You should run:\n\n\tsudo pacman -S $install\n"); +} + +sub give_gentoo_hints() +{ + my %map = ( + "sphinx_rtd_theme" => "dev-python/sphinx_rtd_theme", + "virtualenv" => "dev-python/virtualenv", + "dot" => "media-gfx/graphviz", + "convert" => "media-gfx/imagemagick", + "xelatex" => "dev-texlive/texlive-xetex media-fonts/dejavu", + "rsvg-convert" => "gnome-base/librsvg", + ); + + check_missing_file("/usr/share/fonts/dejavu/DejaVuSans.ttf", + "media-fonts/dejavu", 1) if ($pdf); + + check_missing(\%map); + + return if (!$need && !$optional); + + printf("You should run:\n\n"); + printf("\tsudo su -c 'echo \"media-gfx/imagemagick svg png\" > /etc/portage/package.use/imagemagick'\n"); + printf("\tsudo su -c 'echo \"media-gfx/graphviz cairo pdf\" > /etc/portage/package.use/graphviz'\n"); + printf("\tsudo emerge --ask $install\n"); + +} + +sub check_distros() +{ + # Distro-specific hints + if ($system_release =~ /Red Hat Enterprise Linux/) { + give_redhat_hints; + return; + } + if ($system_release =~ /CentOS/) { + give_redhat_hints; + return; + } + if ($system_release =~ /Scientific Linux/) { + give_redhat_hints; + return; + } + if ($system_release =~ /Oracle Linux Server/) { + give_redhat_hints; + return; + } + if ($system_release =~ /Fedora/) { + give_redhat_hints; + return; + } + if ($system_release =~ /Ubuntu/) { + give_debian_hints; + return; + } + if ($system_release =~ /Debian/) { + give_debian_hints; + return; + } + if ($system_release =~ /openSUSE/) { + give_opensuse_hints; + return; + } + if ($system_release =~ /Mageia/) { + give_mageia_hints; + return; + } + if ($system_release =~ /Arch Linux/) { + give_arch_linux_hints; + return; + } + if ($system_release =~ /Gentoo/) { + give_gentoo_hints; + return; + } + + # + # Fall-back to generic hint code for other distros + # That's far from ideal, specially for LaTeX dependencies. + # + my %map = ( + "sphinx-build" => "sphinx" + ); + check_missing_tex(1) if ($pdf); + check_missing(\%map); + print "I don't know distro $system_release.\n"; + print "So, I can't provide you a hint with the install procedure.\n"; + print "There are likely missing dependencies.\n"; +} + +# +# Common dependencies +# + +sub check_needs() +{ + if ($system_release) { + print "Detected OS: $system_release.\n"; + } else { + print "Unknown OS\n"; + } + + # RHEL 7.x and clones have Sphinx version 1.1.x and incomplete texlive + if (($system_release =~ /Red Hat Enterprise Linux/) || + ($system_release =~ /CentOS/) || + ($system_release =~ /Scientific Linux/) || + ($system_release =~ /Oracle Linux Server/)) { + $virtualenv = 1; + $pdf = 0; + + printf("NOTE: On this distro, Sphinx and TexLive shipped versions are incompatible\n"); + printf("with doc build. So, use Sphinx via a Python virtual environment.\n\n"); + printf("This script can't install a TexLive version that would provide PDF.\n"); + } + + # Check for needed programs/tools + check_sphinx(); + check_perl_module("Pod::Usage", 0); + check_program("make", 0); + check_program("gcc", 0); + check_python_module("sphinx_rtd_theme", 1) if (!$virtualenv); + check_program("xelatex", 1) if ($pdf); + check_program("dot", 1); + check_program("convert", 1); + check_program("rsvg-convert", 1) if ($pdf); + + check_distros(); + + if ($need_symlink) { + printf "\tsudo ln -sf %s /usr/bin/sphinx-build\n\n", + which("sphinx-build-3"); + } + if ($need_sphinx) { + my $activate = "$virtenv_dir/bin/activate"; + if (-e "$ENV{'PWD'}/$activate") { + printf "\nNeed to activate virtualenv with:\n"; + printf "\t. $activate\n"; + } else { + my $virtualenv = findprog("virtualenv-3"); + $virtualenv = findprog("virtualenv-3.5") if (!$virtualenv); + $virtualenv = findprog("virtualenv") if (!$virtualenv); + $virtualenv = "virtualenv" if (!$virtualenv); + + printf "\t$virtualenv $virtenv_dir\n"; + printf "\t. $activate\n"; + printf "\tpip install -r $requirement_file\n"; + $need++; + } + } + printf "\n"; + + print "All optional dependenties are met.\n" if (!$optional); + + if ($need == 1) { + die "Can't build as $need mandatory dependency is missing"; + } elsif ($need) { + die "Can't build as $need mandatory dependencies are missing"; + } + + print "Needed package dependencies are met.\n"; +} + +# +# Main +# + +while (@ARGV) { + my $arg = shift(@ARGV); + + if ($arg eq "--no-virtualenv") { + $virtualenv = 0; + } elsif ($arg eq "--no-pdf"){ + $pdf = 0; + } else { + print "Usage:\n\t$0 <--no-virtualenv> <--no-pdf>\n\n"; + exit -1; + } +} + +# +# Determine the system type. There's no standard unique way that would +# work with all distros with a minimal package install. So, several +# methods are used here. +# +# By default, it will use lsb_release function. If not available, it will +# fail back to reading the known different places where the distro name +# is stored +# + +$system_release = qx(lsb_release -d) if which("lsb_release"); +$system_release =~ s/Description:\s*// if ($system_release); +$system_release = catcheck("/etc/system-release") if !$system_release; +$system_release = catcheck("/etc/redhat-release") if !$system_release; +$system_release = catcheck("/etc/lsb-release") if !$system_release; +$system_release = catcheck("/etc/gentoo-release") if !$system_release; +$system_release = catcheck("/etc/issue") if !$system_release; +$system_release =~ s/\s+$//; + +check_needs; |