summaryrefslogtreecommitdiff
path: root/net/x25
diff options
context:
space:
mode:
Diffstat (limited to 'net/x25')
-rw-r--r--net/x25/Kconfig36
-rw-r--r--net/x25/af_x25.c110
-rw-r--r--net/x25/x25_facilities.c34
-rw-r--r--net/x25/x25_subr.c41
4 files changed, 164 insertions, 57 deletions
diff --git a/net/x25/Kconfig b/net/x25/Kconfig
new file mode 100644
index 000000000000..e6759c9660bb
--- /dev/null
+++ b/net/x25/Kconfig
@@ -0,0 +1,36 @@
+#
+# CCITT X.25 Packet Layer
+#
+
+config X25
+ tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ ---help---
+ X.25 is a set of standardized network protocols, similar in scope to
+ frame relay; the one physical line from your box to the X.25 network
+ entry point can carry several logical point-to-point connections
+ (called "virtual circuits") to other computers connected to the X.25
+ network. Governments, banks, and other organizations tend to use it
+ to connect to each other or to form Wide Area Networks (WANs). Many
+ countries have public X.25 networks. X.25 consists of two
+ protocols: the higher level Packet Layer Protocol (PLP) (say Y here
+ if you want that) and the lower level data link layer protocol LAPB
+ (say Y to "LAPB Data Link Driver" below if you want that).
+
+ You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
+ <http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm>.
+ Information about X.25 for Linux is contained in the files
+ <file:Documentation/networking/x25.txt> and
+ <file:Documentation/networking/x25-iface.txt>.
+
+ One connects to an X.25 network either with a dedicated network card
+ using the X.21 protocol (not yet supported by Linux) or one can do
+ X.25 over a standard telephone line using an ordinary modem (say Y
+ to "X.25 async driver" below) or over Ethernet using an ordinary
+ Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
+ Driver" and "LAPB over Ethernet driver" below).
+
+ To compile this driver as a module, choose M here: the module
+ will be called x25. If unsure, say N.
+
+
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 2a24b243b841..04bec047fa9a 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -29,6 +29,10 @@
* 2000-11-14 Henner Eisen Closing datalink from NETDEV_GOING_DOWN
* 2002-10-06 Arnaldo C. Melo Get rid of cli/sti, move proc stuff to
* x25_proc.c, using seq_file
+ * 2005-04-02 Shaun Pereira Selective sub address matching
+ * with call user data
+ * 2005-04-15 Shaun Pereira Fast select with no restriction on
+ * response
*/
#include <linux/config.h>
@@ -219,7 +223,8 @@ static void x25_insert_socket(struct sock *sk)
* Note: if a listening socket has cud set it must only get calls
* with matching cud.
*/
-static struct sock *x25_find_listener(struct x25_address *addr, struct x25_calluserdata *calluserdata)
+static struct sock *x25_find_listener(struct x25_address *addr,
+ struct sk_buff *skb)
{
struct sock *s;
struct sock *next_best;
@@ -230,22 +235,23 @@ static struct sock *x25_find_listener(struct x25_address *addr, struct x25_callu
sk_for_each(s, node, &x25_list)
if ((!strcmp(addr->x25_addr,
- x25_sk(s)->source_addr.x25_addr) ||
- !strcmp(addr->x25_addr,
- null_x25_address.x25_addr)) &&
- s->sk_state == TCP_LISTEN) {
-
+ x25_sk(s)->source_addr.x25_addr) ||
+ !strcmp(addr->x25_addr,
+ null_x25_address.x25_addr)) &&
+ s->sk_state == TCP_LISTEN) {
/*
* Found a listening socket, now check the incoming
* call user data vs this sockets call user data
*/
- if (x25_check_calluserdata(&x25_sk(s)->calluserdata, calluserdata)) {
- sock_hold(s);
- goto found;
- }
- if (x25_sk(s)->calluserdata.cudlength == 0) {
+ if(skb->len > 0 && x25_sk(s)->cudmatchlength > 0) {
+ if((memcmp(x25_sk(s)->calluserdata.cuddata,
+ skb->data,
+ x25_sk(s)->cudmatchlength)) == 0) {
+ sock_hold(s);
+ goto found;
+ }
+ } else
next_best = s;
- }
}
if (next_best) {
s = next_best;
@@ -497,6 +503,9 @@ static int x25_create(struct socket *sock, int protocol)
x25->t23 = sysctl_x25_clear_request_timeout;
x25->t2 = sysctl_x25_ack_holdback_timeout;
x25->state = X25_STATE_0;
+ x25->cudmatchlength = 0;
+ x25->accptapprv = X25_DENY_ACCPT_APPRV; /* normally no cud */
+ /* on call accept */
x25->facilities.winsize_in = X25_DEFAULT_WINDOW_SIZE;
x25->facilities.winsize_out = X25_DEFAULT_WINDOW_SIZE;
@@ -545,6 +554,8 @@ static struct sock *x25_make_new(struct sock *osk)
x25->t2 = ox25->t2;
x25->facilities = ox25->facilities;
x25->qbitincl = ox25->qbitincl;
+ x25->cudmatchlength = ox25->cudmatchlength;
+ x25->accptapprv = ox25->accptapprv;
x25_init_timers(sk);
out:
@@ -822,7 +833,6 @@ int x25_rx_call_request(struct sk_buff *skb, struct x25_neigh *nb,
struct x25_sock *makex25;
struct x25_address source_addr, dest_addr;
struct x25_facilities facilities;
- struct x25_calluserdata calluserdata;
int len, rc;
/*
@@ -845,19 +855,10 @@ int x25_rx_call_request(struct sk_buff *skb, struct x25_neigh *nb,
skb_pull(skb,len);
/*
- * Incoming Call User Data.
- */
- if (skb->len >= 0) {
- memcpy(calluserdata.cuddata, skb->data, skb->len);
- calluserdata.cudlength = skb->len;
- }
-
- skb_push(skb,len);
-
- /*
* Find a listener for the particular address/cud pair.
*/
- sk = x25_find_listener(&source_addr,&calluserdata);
+ sk = x25_find_listener(&source_addr,skb);
+ skb_push(skb,len);
/*
* We can't accept the Call Request.
@@ -900,11 +901,23 @@ int x25_rx_call_request(struct sk_buff *skb, struct x25_neigh *nb,
makex25->neighbour = nb;
makex25->facilities = facilities;
makex25->vc_facil_mask = x25_sk(sk)->vc_facil_mask;
- makex25->calluserdata = calluserdata;
-
- x25_write_internal(make, X25_CALL_ACCEPTED);
+ /* ensure no reverse facil on accept */
+ makex25->vc_facil_mask &= ~X25_MASK_REVERSE;
+ makex25->cudmatchlength = x25_sk(sk)->cudmatchlength;
+
+ /* Normally all calls are accepted immediatly */
+ if(makex25->accptapprv & X25_DENY_ACCPT_APPRV) {
+ x25_write_internal(make, X25_CALL_ACCEPTED);
+ makex25->state = X25_STATE_3;
+ }
- makex25->state = X25_STATE_3;
+ /*
+ * Incoming Call User Data.
+ */
+ if (skb->len >= 0) {
+ memcpy(makex25->calluserdata.cuddata, skb->data, skb->len);
+ makex25->calluserdata.cudlength = skb->len;
+ }
sk->sk_ack_backlog++;
@@ -1288,7 +1301,8 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
if (facilities.throughput < 0x03 ||
facilities.throughput > 0xDD)
break;
- if (facilities.reverse && facilities.reverse != 1)
+ if (facilities.reverse &&
+ (facilities.reverse | 0x81)!= 0x81)
break;
x25->facilities = facilities;
rc = 0;
@@ -1325,6 +1339,44 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
break;
}
+ case SIOCX25SCUDMATCHLEN: {
+ struct x25_subaddr sub_addr;
+ rc = -EINVAL;
+ if(sk->sk_state != TCP_CLOSE)
+ break;
+ rc = -EFAULT;
+ if (copy_from_user(&sub_addr, argp,
+ sizeof(sub_addr)))
+ break;
+ rc = -EINVAL;
+ if(sub_addr.cudmatchlength > X25_MAX_CUD_LEN)
+ break;
+ x25->cudmatchlength = sub_addr.cudmatchlength;
+ rc = 0;
+ break;
+ }
+
+ case SIOCX25CALLACCPTAPPRV: {
+ rc = -EINVAL;
+ if (sk->sk_state != TCP_CLOSE)
+ break;
+ x25->accptapprv = X25_ALLOW_ACCPT_APPRV;
+ rc = 0;
+ break;
+ }
+
+ case SIOCX25SENDCALLACCPT: {
+ rc = -EINVAL;
+ if (sk->sk_state != TCP_ESTABLISHED)
+ break;
+ if (x25->accptapprv) /* must call accptapprv above */
+ break;
+ x25_write_internal(sk, X25_CALL_ACCEPTED);
+ x25->state = X25_STATE_3;
+ rc = 0;
+ break;
+ }
+
default:
rc = dev_ioctl(cmd, argp);
break;
diff --git a/net/x25/x25_facilities.c b/net/x25/x25_facilities.c
index a21bdb95f9a8..54278b962f4c 100644
--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -17,6 +17,8 @@
* X.25 001 Split from x25_subr.c
* mar/20/00 Daniela Squassoni Disabling/enabling of facilities
* negotiation.
+ * apr/14/05 Shaun Pereira - Allow fast select with no restriction
+ * on response.
*/
#include <linux/kernel.h>
@@ -43,9 +45,31 @@ int x25_parse_facilities(struct sk_buff *skb,
case X25_FAC_CLASS_A:
switch (*p) {
case X25_FAC_REVERSE:
- facilities->reverse = p[1] & 0x01;
- *vc_fac_mask |= X25_MASK_REVERSE;
- break;
+ if((p[1] & 0x81) == 0x81) {
+ facilities->reverse = p[1] & 0x81;
+ *vc_fac_mask |= X25_MASK_REVERSE;
+ break;
+ }
+
+ if((p[1] & 0x01) == 0x01) {
+ facilities->reverse = p[1] & 0x01;
+ *vc_fac_mask |= X25_MASK_REVERSE;
+ break;
+ }
+
+ if((p[1] & 0x80) == 0x80) {
+ facilities->reverse = p[1] & 0x80;
+ *vc_fac_mask |= X25_MASK_REVERSE;
+ break;
+ }
+
+ if(p[1] == 0x00) {
+ facilities->reverse
+ = X25_DEFAULT_REVERSE;
+ *vc_fac_mask |= X25_MASK_REVERSE;
+ break;
+ }
+
case X25_FAC_THROUGHPUT:
facilities->throughput = p[1];
*vc_fac_mask |= X25_MASK_THROUGHPUT;
@@ -122,7 +146,7 @@ int x25_create_facilities(unsigned char *buffer,
if (facilities->reverse && (facil_mask & X25_MASK_REVERSE)) {
*p++ = X25_FAC_REVERSE;
- *p++ = !!facilities->reverse;
+ *p++ = facilities->reverse;
}
if (facilities->throughput && (facil_mask & X25_MASK_THROUGHPUT)) {
@@ -171,7 +195,7 @@ int x25_negotiate_facilities(struct sk_buff *skb, struct sock *sk,
/*
* They want reverse charging, we won't accept it.
*/
- if (theirs.reverse && ours->reverse) {
+ if ((theirs.reverse & 0x01 ) && (ours->reverse & 0x01)) {
SOCK_DEBUG(sk, "X.25: rejecting reverse charging request");
return -1;
}
diff --git a/net/x25/x25_subr.c b/net/x25/x25_subr.c
index 183fea3bba67..7fd872ad0c20 100644
--- a/net/x25/x25_subr.c
+++ b/net/x25/x25_subr.c
@@ -19,6 +19,8 @@
* mar/20/00 Daniela Squassoni Disabling/enabling of facilities
* negotiation.
* jun/24/01 Arnaldo C. Melo use skb_queue_purge, cleanups
+ * apr/04/15 Shaun Pereira Fast select with no
+ * restriction on response.
*/
#include <linux/kernel.h>
@@ -127,8 +129,12 @@ void x25_write_internal(struct sock *sk, int frametype)
len += 1 + X25_ADDR_LEN + X25_MAX_FAC_LEN +
X25_MAX_CUD_LEN;
break;
- case X25_CALL_ACCEPTED:
- len += 1 + X25_MAX_FAC_LEN + X25_MAX_CUD_LEN;
+ case X25_CALL_ACCEPTED: /* fast sel with no restr on resp */
+ if(x25->facilities.reverse & 0x80) {
+ len += 1 + X25_MAX_FAC_LEN + X25_MAX_CUD_LEN;
+ } else {
+ len += 1 + X25_MAX_FAC_LEN;
+ }
break;
case X25_CLEAR_REQUEST:
case X25_RESET_REQUEST:
@@ -203,9 +209,16 @@ void x25_write_internal(struct sock *sk, int frametype)
x25->vc_facil_mask);
dptr = skb_put(skb, len);
memcpy(dptr, facilities, len);
- dptr = skb_put(skb, x25->calluserdata.cudlength);
- memcpy(dptr, x25->calluserdata.cuddata,
- x25->calluserdata.cudlength);
+
+ /* fast select with no restriction on response
+ allows call user data. Userland must
+ ensure it is ours and not theirs */
+ if(x25->facilities.reverse & 0x80) {
+ dptr = skb_put(skb,
+ x25->calluserdata.cudlength);
+ memcpy(dptr, x25->calluserdata.cuddata,
+ x25->calluserdata.cudlength);
+ }
x25->calluserdata.cudlength = 0;
break;
@@ -354,21 +367,3 @@ void x25_check_rbuf(struct sock *sk)
}
}
-/*
- * Compare 2 calluserdata structures, used to find correct listening sockets
- * when call user data is used.
- */
-int x25_check_calluserdata(struct x25_calluserdata *ours, struct x25_calluserdata *theirs)
-{
- int i;
- if (ours->cudlength != theirs->cudlength)
- return 0;
-
- for (i=0;i<ours->cudlength;i++) {
- if (ours->cuddata[i] != theirs->cuddata[i]) {
- return 0;
- }
- }
- return 1;
-}
-