diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/Kconfig | 107 | ||||
| -rw-r--r-- | init/calibrate.c | 11 | ||||
| -rw-r--r-- | init/do_mounts_rd.c | 10 | ||||
| -rw-r--r-- | init/initramfs.c | 60 | ||||
| -rw-r--r-- | init/main.c | 23 |
5 files changed, 176 insertions, 35 deletions
diff --git a/init/Kconfig b/init/Kconfig index 6069b210d83a..e25a82a291a6 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -783,8 +783,13 @@ endchoice endmenu # "RCU Subsystem" +config BUILD_BIN2C + bool + default n + config IKCONFIG tristate "Kernel .config support" + select BUILD_BIN2C ---help--- This option enables the complete Linux kernel ".config" file contents to be saved in the kernel. It provides documentation @@ -806,16 +811,56 @@ config LOG_BUF_SHIFT int "Kernel log buffer size (16 => 64KB, 17 => 128KB)" range 12 21 default 17 + depends on PRINTK help - Select kernel log buffer size as a power of 2. + Select the minimal kernel log buffer size as a power of 2. + The final size is affected by LOG_CPU_MAX_BUF_SHIFT config + parameter, see below. Any higher size also might be forced + by "log_buf_len" boot parameter. + Examples: - 17 => 128 KB + 17 => 128 KB 16 => 64 KB - 15 => 32 KB - 14 => 16 KB + 15 => 32 KB + 14 => 16 KB 13 => 8 KB 12 => 4 KB +config LOG_CPU_MAX_BUF_SHIFT + int "CPU kernel log buffer size contribution (13 => 8 KB, 17 => 128KB)" + range 0 21 + default 12 if !BASE_SMALL + default 0 if BASE_SMALL + depends on PRINTK + help + This option allows to increase the default ring buffer size + according to the number of CPUs. The value defines the contribution + of each CPU as a power of 2. The used space is typically only few + lines however it might be much more when problems are reported, + e.g. backtraces. + + The increased size means that a new buffer has to be allocated and + the original static one is unused. It makes sense only on systems + with more CPUs. Therefore this value is used only when the sum of + contributions is greater than the half of the default kernel ring + buffer as defined by LOG_BUF_SHIFT. The default values are set + so that more than 64 CPUs are needed to trigger the allocation. + + Also this option is ignored when "log_buf_len" kernel parameter is + used as it forces an exact (power of two) size of the ring buffer. + + The number of possible CPUs is used for this computation ignoring + hotplugging making the compuation optimal for the the worst case + scenerio while allowing a simple algorithm to be used from bootup. + + Examples shift values and their meaning: + 17 => 128 KB for each CPU + 16 => 64 KB for each CPU + 15 => 32 KB for each CPU + 14 => 16 KB for each CPU + 13 => 8 KB for each CPU + 12 => 4 KB for each CPU + # # Architectures with an unreliable sched_clock() should select this: # @@ -1432,6 +1477,7 @@ config FUTEX config HAVE_FUTEX_CMPXCHG bool + depends on FUTEX help Architectures should select this if futex_atomic_cmpxchg_inatomic() is implemented and always working. This removes a couple of runtime @@ -1494,6 +1540,16 @@ config AIO by some high performance threaded applications. Disabling this option saves about 7k. +config ADVISE_SYSCALLS + bool "Enable madvise/fadvise syscalls" if EXPERT + default y + help + This option enables the madvise and fadvise syscalls, used by + applications to advise the kernel about their future memory or file + usage, improving performance. If building an embedded system where no + applications use these syscalls, you can disable this option to save + space. + config PCI_QUIRKS default y bool "Enable PCI quirk workarounds" if EXPERT @@ -1863,6 +1919,49 @@ config MODULE_SIG_HASH default "sha384" if MODULE_SIG_SHA384 default "sha512" if MODULE_SIG_SHA512 +config MODULE_COMPRESS + bool "Compress modules on installation" + depends on MODULES + help + This option compresses the kernel modules when 'make + modules_install' is run. + + The modules will be compressed either using gzip or xz depend on the + choice made in "Compression algorithm". + + module-init-tools has support for gzip format while kmod handle gzip + and xz compressed modules. + + When a kernel module is installed from outside of the main kernel + source and uses the Kbuild system for installing modules then that + kernel module will also be compressed when it is installed. + + This option provides little benefit when the modules are to be used inside + an initrd or initramfs, it generally is more efficient to compress the whole + initrd or initramfs instead. + + This is fully compatible with signed modules while the signed module is + compressed. module-init-tools or kmod handles decompression and provide to + other layer the uncompressed but signed payload. + +choice + prompt "Compression algorithm" + depends on MODULE_COMPRESS + default MODULE_COMPRESS_GZIP + help + This determines which sort of compression will be used during + 'make modules_install'. + + GZIP (default) and XZ are supported. + +config MODULE_COMPRESS_GZIP + bool "GZIP" + +config MODULE_COMPRESS_XZ + bool "XZ" + +endchoice + endif # MODULES config INIT_ALL_POSSIBLE diff --git a/init/calibrate.c b/init/calibrate.c index 520702db9acc..ce635dccf3d9 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -262,6 +262,15 @@ unsigned long __attribute__((weak)) calibrate_delay_is_known(void) return 0; } +/* + * Indicate the cpu delay calibration is done. This can be used by + * architectures to stop accepting delay timer registrations after this point. + */ + +void __attribute__((weak)) calibration_delay_done(void) +{ +} + void calibrate_delay(void) { unsigned long lpj; @@ -301,4 +310,6 @@ void calibrate_delay(void) loops_per_jiffy = lpj; printed = true; + + calibration_delay_done(); } diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c index a8227022e3a0..e5d059e8aa11 100644 --- a/init/do_mounts_rd.c +++ b/init/do_mounts_rd.c @@ -311,9 +311,9 @@ static int exit_code; static int decompress_error; static int crd_infd, crd_outfd; -static int __init compr_fill(void *buf, unsigned int len) +static long __init compr_fill(void *buf, unsigned long len) { - int r = sys_read(crd_infd, buf, len); + long r = sys_read(crd_infd, buf, len); if (r < 0) printk(KERN_ERR "RAMDISK: error while reading compressed data"); else if (r == 0) @@ -321,13 +321,13 @@ static int __init compr_fill(void *buf, unsigned int len) return r; } -static int __init compr_flush(void *window, unsigned int outcnt) +static long __init compr_flush(void *window, unsigned long outcnt) { - int written = sys_write(crd_outfd, window, outcnt); + long written = sys_write(crd_outfd, window, outcnt); if (written != outcnt) { if (decompress_error == 0) printk(KERN_ERR - "RAMDISK: incomplete write (%d != %d)\n", + "RAMDISK: incomplete write (%ld != %ld)\n", written, outcnt); decompress_error = 1; return -1; diff --git a/init/initramfs.c b/init/initramfs.c index a8497fab1c3d..bece48c3461e 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -19,6 +19,29 @@ #include <linux/syscalls.h> #include <linux/utime.h> +static ssize_t __init xwrite(int fd, const char *p, size_t count) +{ + ssize_t out = 0; + + /* sys_write only can write MAX_RW_COUNT aka 2G-4K bytes at most */ + while (count) { + ssize_t rv = sys_write(fd, p, count); + + if (rv < 0) { + if (rv == -EINTR || rv == -EAGAIN) + continue; + return out ? out : rv; + } else if (rv == 0) + break; + + p += rv; + out += rv; + count -= rv; + } + + return out; +} + static __initdata char *message; static void __init error(char *x) { @@ -174,7 +197,7 @@ static __initdata enum state { } state, next_state; static __initdata char *victim; -static __initdata unsigned count; +static unsigned long count __initdata; static __initdata loff_t this_header, next_header; static inline void __init eat(unsigned n) @@ -186,7 +209,7 @@ static inline void __init eat(unsigned n) static __initdata char *vcollected; static __initdata char *collected; -static __initdata int remains; +static long remains __initdata; static __initdata char *collect; static void __init read_into(char *buf, unsigned size, enum state next) @@ -213,7 +236,7 @@ static int __init do_start(void) static int __init do_collect(void) { - unsigned n = remains; + unsigned long n = remains; if (count < n) n = count; memcpy(collect, victim, n); @@ -346,7 +369,8 @@ static int __init do_name(void) static int __init do_copy(void) { if (count >= body_len) { - sys_write(wfd, victim, body_len); + if (xwrite(wfd, victim, body_len) != body_len) + error("write error"); sys_close(wfd); do_utime(vcollected, mtime); kfree(vcollected); @@ -354,7 +378,8 @@ static int __init do_copy(void) state = SkipIt; return 0; } else { - sys_write(wfd, victim, count); + if (xwrite(wfd, victim, count) != count) + error("write error"); body_len -= count; eat(count); return 1; @@ -384,7 +409,7 @@ static __initdata int (*actions[])(void) = { [Reset] = do_reset, }; -static int __init write_buffer(char *buf, unsigned len) +static long __init write_buffer(char *buf, unsigned long len) { count = len; victim = buf; @@ -394,11 +419,11 @@ static int __init write_buffer(char *buf, unsigned len) return len - count; } -static int __init flush_buffer(void *bufv, unsigned len) +static long __init flush_buffer(void *bufv, unsigned long len) { char *buf = (char *) bufv; - int written; - int origLen = len; + long written; + long origLen = len; if (message) return -1; while ((written = write_buffer(buf, len)) < len && !message) { @@ -417,13 +442,13 @@ static int __init flush_buffer(void *bufv, unsigned len) return origLen; } -static unsigned my_inptr; /* index of next byte to be processed in inbuf */ +static unsigned long my_inptr; /* index of next byte to be processed in inbuf */ #include <linux/decompress/generic.h> -static char * __init unpack_to_rootfs(char *buf, unsigned len) +static char * __init unpack_to_rootfs(char *buf, unsigned long len) { - int written, res; + long written; decompress_fn decompress; const char *compress_name; static __initdata char msg_buf[64]; @@ -457,7 +482,7 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len) decompress = decompress_method(buf, len, &compress_name); pr_debug("Detected %s compressed data\n", compress_name); if (decompress) { - res = decompress(buf, len, NULL, flush_buffer, NULL, + int res = decompress(buf, len, NULL, flush_buffer, NULL, &my_inptr, error); if (res) error("decompressor failed"); @@ -603,8 +628,13 @@ static int __init populate_rootfs(void) fd = sys_open("/initrd.image", O_WRONLY|O_CREAT, 0700); if (fd >= 0) { - sys_write(fd, (char *)initrd_start, - initrd_end - initrd_start); + ssize_t written = xwrite(fd, (char *)initrd_start, + initrd_end - initrd_start); + + if (written != initrd_end - initrd_start) + pr_err("/initrd.image: incomplete write (%zd != %ld)\n", + written, initrd_end - initrd_start); + sys_close(fd); free_initrd(); } diff --git a/init/main.c b/init/main.c index e8ae1fef0908..bb1aed928f21 100644 --- a/init/main.c +++ b/init/main.c @@ -6,7 +6,7 @@ * GK 2/5/95 - Changed to support mounting root fs via NFS * Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96 * Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96 - * Simplified starting of init: Michael A. Griffith <grif@acm.org> + * Simplified starting of init: Michael A. Griffith <grif@acm.org> */ #define DEBUG /* Enable initcall_debug */ @@ -136,7 +136,7 @@ static char *ramdisk_execute_command; * Used to generate warnings if static_key manipulation functions are used * before jump_label_init is called. */ -bool static_key_initialized __read_mostly = false; +bool static_key_initialized __read_mostly; EXPORT_SYMBOL_GPL(static_key_initialized); /* @@ -159,8 +159,8 @@ static int __init set_reset_devices(char *str) __setup("reset_devices", set_reset_devices); -static const char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, }; -const char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, }; +static const char *argv_init[MAX_INIT_ARGS+2] = { "init", NULL, }; +const char *envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, }; static const char *panic_later, *panic_param; extern const struct obs_kernel_param __setup_start[], __setup_end[]; @@ -199,7 +199,6 @@ static int __init obsolete_checksetup(char *line) * still work even if initially too large, it will just take slightly longer */ unsigned long loops_per_jiffy = (1<<12); - EXPORT_SYMBOL(loops_per_jiffy); static int __init debug_kernel(char *str) @@ -376,8 +375,8 @@ static void __init setup_command_line(char *command_line) initcall_command_line = memblock_virt_alloc(strlen(boot_command_line) + 1, 0); static_command_line = memblock_virt_alloc(strlen(command_line) + 1, 0); - strcpy (saved_command_line, boot_command_line); - strcpy (static_command_line, command_line); + strcpy(saved_command_line, boot_command_line); + strcpy(static_command_line, command_line); } /* @@ -445,8 +444,8 @@ void __init parse_early_options(char *cmdline) /* Arch code calls this early on, or if not, just before other parsing. */ void __init parse_early_param(void) { - static __initdata int done = 0; - static __initdata char tmp_cmdline[COMMAND_LINE_SIZE]; + static int done __initdata; + static char tmp_cmdline[COMMAND_LINE_SIZE] __initdata; if (done) return; @@ -500,7 +499,8 @@ static void __init mm_init(void) asmlinkage __visible void __init start_kernel(void) { - char * command_line, *after_dashes; + char *command_line; + char *after_dashes; extern const struct kernel_param __start___param[], __stop___param[]; /* @@ -572,7 +572,8 @@ asmlinkage __visible void __init start_kernel(void) * fragile until we cpu_idle() for the first time. */ preempt_disable(); - if (WARN(!irqs_disabled(), "Interrupts were enabled *very* early, fixing it\n")) + if (WARN(!irqs_disabled(), + "Interrupts were enabled *very* early, fixing it\n")) local_irq_disable(); idr_init_cache(); rcu_init(); |