diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/dt-bindings/mfd/arizona.h | 4 | ||||
| -rw-r--r-- | include/linux/extcon.h | 134 | ||||
| -rw-r--r-- | include/linux/extcon/extcon-adc-jack.h | 5 | ||||
| -rw-r--r-- | include/linux/hyperv.h | 48 | ||||
| -rw-r--r-- | include/linux/mei_cl_bus.h | 38 | ||||
| -rw-r--r-- | include/linux/mfd/arizona/pdata.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/axp20x.h | 5 | ||||
| -rw-r--r-- | include/linux/mod_devicetable.h | 13 | ||||
| -rw-r--r-- | include/linux/parport.h | 43 | ||||
| -rw-r--r-- | include/linux/scif.h | 993 | ||||
| -rw-r--r-- | include/uapi/linux/Kbuild | 1 | ||||
| -rw-r--r-- | include/uapi/linux/hyperv.h | 8 | ||||
| -rw-r--r-- | include/uapi/linux/mic_common.h | 12 | ||||
| -rw-r--r-- | include/uapi/linux/scif_ioctl.h | 130 |
14 files changed, 1322 insertions, 115 deletions
diff --git a/include/dt-bindings/mfd/arizona.h b/include/dt-bindings/mfd/arizona.h index 555609910acb..7b2000cead43 100644 --- a/include/dt-bindings/mfd/arizona.h +++ b/include/dt-bindings/mfd/arizona.h @@ -104,4 +104,8 @@ #define ARIZONA_MICD_TIME_256MS 11 #define ARIZONA_MICD_TIME_512MS 12 +#define ARIZONA_ACCDET_MODE_MIC 0 +#define ARIZONA_ACCDET_MODE_HPL 1 +#define ARIZONA_ACCDET_MODE_HPR 2 + #endif diff --git a/include/linux/extcon.h b/include/linux/extcon.h index 36f49c405dfb..b16d929fa75f 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -1,6 +1,9 @@ /* * External connector (extcon) class driver * + * Copyright (C) 2015 Samsung Electronics + * Author: Chanwoo Choi <cw00.choi@samsung.com> + * * Copyright (C) 2012 Samsung Electronics * Author: Donggeun Kim <dg77.kim@samsung.com> * Author: MyungJoo Ham <myungjoo.ham@samsung.com> @@ -27,50 +30,35 @@ #include <linux/notifier.h> #include <linux/sysfs.h> -#define SUPPORTED_CABLE_MAX 32 -#define CABLE_NAME_MAX 30 - /* - * The standard cable name is to help support general notifier - * and notifiee device drivers to share the common names. - * Please use standard cable names unless your notifier device has - * a very unique and abnormal cable or - * the cable type is supposed to be used with only one unique - * pair of notifier/notifiee devices. - * - * Please add any other "standard" cables used with extcon dev. - * - * You may add a dot and number to specify version or specification - * of the specific cable if it is required. (e.g., "Fast-charger.18" - * and "Fast-charger.10" for 1.8A and 1.0A chargers) - * However, the notifiee and notifier should be able to handle such - * string and if the notifiee can negotiate the protocol or identify, - * you don't need such convention. This convention is helpful when - * notifier can distinguish but notifiee cannot. + * Define the unique id of supported external connectors */ -enum extcon_cable_name { - EXTCON_USB = 0, - EXTCON_USB_HOST, - EXTCON_TA, /* Travel Adaptor */ - EXTCON_FAST_CHARGER, - EXTCON_SLOW_CHARGER, - EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */ - EXTCON_HDMI, - EXTCON_MHL, - EXTCON_DVI, - EXTCON_VGA, - EXTCON_DOCK, - EXTCON_LINE_IN, - EXTCON_LINE_OUT, - EXTCON_MIC_IN, - EXTCON_HEADPHONE_OUT, - EXTCON_SPDIF_IN, - EXTCON_SPDIF_OUT, - EXTCON_VIDEO_IN, - EXTCON_VIDEO_OUT, - EXTCON_MECHANICAL, -}; -extern const char extcon_cable_name[][CABLE_NAME_MAX + 1]; +#define EXTCON_NONE 0 + +#define EXTCON_USB 1 /* USB connector */ +#define EXTCON_USB_HOST 2 + +#define EXTCON_TA 3 /* Charger connector */ +#define EXTCON_FAST_CHARGER 4 +#define EXTCON_SLOW_CHARGER 5 +#define EXTCON_CHARGE_DOWNSTREAM 6 + +#define EXTCON_LINE_IN 7 /* Audio/Video connector */ +#define EXTCON_LINE_OUT 8 +#define EXTCON_MICROPHONE 9 +#define EXTCON_HEADPHONE 10 +#define EXTCON_HDMI 11 +#define EXTCON_MHL 12 +#define EXTCON_DVI 13 +#define EXTCON_VGA 14 +#define EXTCON_SPDIF_IN 15 +#define EXTCON_SPDIF_OUT 16 +#define EXTCON_VIDEO_IN 17 +#define EXTCON_VIDEO_OUT 18 + +#define EXTCON_DOCK 19 /* Misc connector */ +#define EXTCON_JIG 20 +#define EXTCON_MECHANICAL 21 struct extcon_cable; @@ -78,7 +66,7 @@ struct extcon_cable; * struct extcon_dev - An extcon device represents one external connector. * @name: The name of this extcon device. Parent device name is * used if NULL. - * @supported_cable: Array of supported cable names ending with NULL. + * @supported_cable: Array of supported cable names ending with EXTCON_NONE. * If supported_cable is NULL, cable name related APIs * are disabled. * @mutually_exclusive: Array of mutually exclusive set of cables that cannot @@ -89,16 +77,14 @@ struct extcon_cable; * be attached simulataneously. {0x7, 0} is equivalent to * {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there * can be no simultaneous connections. - * @print_name: An optional callback to override the method to print the - * name of the extcon device. * @print_state: An optional callback to override the method to print the * status of the extcon device. * @dev: Device of this extcon. * @state: Attach/detach state of this extcon. Do not provide at * register-time. * @nh: Notifier for the state change events from this extcon - * @entry: To support list of extcon devices so that users can search - * for extcon devices based on the extcon name. + * @entry: To support list of extcon devices so that users can + * search for extcon devices based on the extcon name. * @lock: * @max_supported: Internal value to store the number of cables. * @extcon_dev_type: Device_type struct to provide attribute_groups @@ -113,16 +99,15 @@ struct extcon_cable; struct extcon_dev { /* Optional user initializing data */ const char *name; - const char **supported_cable; + const unsigned int *supported_cable; const u32 *mutually_exclusive; /* Optional callbacks to override class functions */ - ssize_t (*print_name)(struct extcon_dev *edev, char *buf); ssize_t (*print_state)(struct extcon_dev *edev, char *buf); /* Internal data. Please do not set. */ struct device dev; - struct raw_notifier_head nh; + struct raw_notifier_head *nh; struct list_head entry; int max_supported; spinlock_t lock; /* could be called by irq handler */ @@ -161,8 +146,6 @@ struct extcon_cable { /** * struct extcon_specific_cable_nb - An internal data for * extcon_register_interest(). - * @internal_nb: A notifier block bridging extcon notifier - * and cable notifier. * @user_nb: user provided notifier block for events from * a specific cable. * @cable_index: the target cable. @@ -170,7 +153,6 @@ struct extcon_cable { * @previous_value: the saved previous event value. */ struct extcon_specific_cable_nb { - struct notifier_block internal_nb; struct notifier_block *user_nb; int cable_index; struct extcon_dev *edev; @@ -194,10 +176,10 @@ extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name); /* * Following APIs control the memory of extcon device. */ -extern struct extcon_dev *extcon_dev_allocate(const char **cables); +extern struct extcon_dev *extcon_dev_allocate(const unsigned int *cable); extern void extcon_dev_free(struct extcon_dev *edev); extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, - const char **cables); + const unsigned int *cable); extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev); /* @@ -216,13 +198,10 @@ extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state); /* * get/set_cable_state access each bit of the 32b encoded state value. - * They are used to access the status of each cable based on the cable_name - * or cable_index, which is retrieved by extcon_find_cable_index + * They are used to access the status of each cable based on the cable_name. */ -extern int extcon_find_cable_index(struct extcon_dev *sdev, - const char *cable_name); -extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index); -extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index, +extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id); +extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id, bool cable_state); extern int extcon_get_cable_state(struct extcon_dev *edev, @@ -249,16 +228,21 @@ extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb); * we do not recommend to use this for normal 'notifiee' device drivers who * want to be notified by a specific external port of the notifier. */ -extern int extcon_register_notifier(struct extcon_dev *edev, +extern int extcon_register_notifier(struct extcon_dev *edev, unsigned int id, + struct notifier_block *nb); +extern int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id, struct notifier_block *nb); -extern int extcon_unregister_notifier(struct extcon_dev *edev, - struct notifier_block *nb); /* * Following API get the extcon device from devicetree. * This function use phandle of devicetree to get extcon device directly. */ -extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index); +extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, + int index); + +/* Following API to get information of extcon device */ +extern const char *extcon_get_edev_name(struct extcon_dev *edev); + #else /* CONFIG_EXTCON */ static inline int extcon_dev_register(struct extcon_dev *edev) { @@ -276,7 +260,7 @@ static inline int devm_extcon_dev_register(struct device *dev, static inline void devm_extcon_dev_unregister(struct device *dev, struct extcon_dev *edev) { } -static inline struct extcon_dev *extcon_dev_allocate(const char **cables) +static inline struct extcon_dev *extcon_dev_allocate(const unsigned int *cable) { return ERR_PTR(-ENOSYS); } @@ -284,7 +268,7 @@ static inline struct extcon_dev *extcon_dev_allocate(const char **cables) static inline void extcon_dev_free(struct extcon_dev *edev) { } static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, - const char **cables) + const unsigned int *cable) { return ERR_PTR(-ENOSYS); } @@ -307,20 +291,14 @@ static inline int extcon_update_state(struct extcon_dev *edev, u32 mask, return 0; } -static inline int extcon_find_cable_index(struct extcon_dev *edev, - const char *cable_name) -{ - return 0; -} - static inline int extcon_get_cable_state_(struct extcon_dev *edev, - int cable_index) + unsigned int id) { return 0; } static inline int extcon_set_cable_state_(struct extcon_dev *edev, - int cable_index, bool cable_state) + unsigned int id, bool cable_state) { return 0; } @@ -343,13 +321,15 @@ static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name) } static inline int extcon_register_notifier(struct extcon_dev *edev, - struct notifier_block *nb) + unsigned int id, + struct notifier_block *nb) { return 0; } static inline int extcon_unregister_notifier(struct extcon_dev *edev, - struct notifier_block *nb) + unsigned int id, + struct notifier_block *nb) { return 0; } diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h index 9ca958c4e94c..53c60806bcfb 100644 --- a/include/linux/extcon/extcon-adc-jack.h +++ b/include/linux/extcon/extcon-adc-jack.h @@ -44,7 +44,7 @@ struct adc_jack_cond { * @consumer_channel: Unique name to identify the channel on the consumer * side. This typically describes the channels used within * the consumer. E.g. 'battery_voltage' - * @cable_names: array of cable names ending with null. + * @cable_names: array of extcon id for supported cables. * @adc_contitions: array of struct adc_jack_cond conditions ending * with .state = 0 entry. This describes how to decode * adc values into extcon state. @@ -58,8 +58,7 @@ struct adc_jack_pdata { const char *name; const char *consumer_channel; - /* The last entry should be NULL */ - const char **cable_names; + const enum extcon *cable_names; /* The last entry's state should be 0 */ struct adc_jack_cond *adc_conditions; diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 902c37aef67e..30d3a1f79450 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -160,16 +160,18 @@ hv_get_ringbuffer_availbytes(struct hv_ring_buffer_info *rbi, * 1 . 1 (Windows 7) * 2 . 4 (Windows 8) * 3 . 0 (Windows 8 R2) + * 4 . 0 (Windows 10) */ #define VERSION_WS2008 ((0 << 16) | (13)) #define VERSION_WIN7 ((1 << 16) | (1)) #define VERSION_WIN8 ((2 << 16) | (4)) #define VERSION_WIN8_1 ((3 << 16) | (0)) +#define VERSION_WIN10 ((4 << 16) | (0)) #define VERSION_INVAL -1 -#define VERSION_CURRENT VERSION_WIN8_1 +#define VERSION_CURRENT VERSION_WIN10 /* Make maximum size of pipe payload of 16K */ #define MAX_PIPE_DATA_PAYLOAD (sizeof(u8) * 16384) @@ -389,10 +391,7 @@ enum vmbus_channel_message_type { CHANNELMSG_INITIATE_CONTACT = 14, CHANNELMSG_VERSION_RESPONSE = 15, CHANNELMSG_UNLOAD = 16, -#ifdef VMBUS_FEATURE_PARENT_OR_PEER_MEMORY_MAPPED_INTO_A_CHILD - CHANNELMSG_VIEWRANGE_ADD = 17, - CHANNELMSG_VIEWRANGE_REMOVE = 18, -#endif + CHANNELMSG_UNLOAD_RESPONSE = 17, CHANNELMSG_COUNT }; @@ -549,21 +548,6 @@ struct vmbus_channel_gpadl_torndown { u32 gpadl; } __packed; -#ifdef VMBUS_FEATURE_PARENT_OR_PEER_MEMORY_MAPPED_INTO_A_CHILD -struct vmbus_channel_view_range_add { - struct vmbus_channel_message_header header; - PHYSICAL_ADDRESS viewrange_base; - u64 viewrange_length; - u32 child_relid; -} __packed; - -struct vmbus_channel_view_range_remove { - struct vmbus_channel_message_header header; - PHYSICAL_ADDRESS viewrange_base; - u32 child_relid; -} __packed; -#endif - struct vmbus_channel_relid_released { struct vmbus_channel_message_header header; u32 child_relid; @@ -713,6 +697,11 @@ struct vmbus_channel { /* The corresponding CPUID in the guest */ u32 target_cpu; /* + * State to manage the CPU affiliation of channels. + */ + struct cpumask alloced_cpus_in_node; + int numa_node; + /* * Support for sub-channels. For high performance devices, * it will be useful to have multiple sub-channels to support * a scalable communication infrastructure with the host. @@ -745,6 +734,15 @@ struct vmbus_channel { */ struct list_head sc_list; /* + * Current number of sub-channels. + */ + int num_sc; + /* + * Number of a sub-channel (position within sc_list) which is supposed + * to be used as the next outgoing channel. + */ + int next_oc; + /* * The primary channel this sub-channel belongs to. * This will be NULL for the primary channel. */ @@ -758,9 +756,6 @@ struct vmbus_channel { * link up channels based on their CPU affinity. */ struct list_head percpu_list; - - int num_sc; - int next_oc; }; static inline void set_channel_read_state(struct vmbus_channel *c, bool state) @@ -1236,13 +1231,6 @@ extern bool vmbus_prep_negotiate_resp(struct icmsg_hdr *, struct icmsg_negotiate *, u8 *, int, int); -int hv_kvp_init(struct hv_util_service *); -void hv_kvp_deinit(void); -void hv_kvp_onchannelcallback(void *); - -int hv_vss_init(struct hv_util_service *); -void hv_vss_deinit(void); -void hv_vss_onchannelcallback(void *); void hv_process_channel_removal(struct vmbus_channel *channel, u32 relid); extern struct resource hyperv_mmio; diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index 0819d36a3a74..a16b1f9c1aca 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -7,6 +7,42 @@ struct mei_cl_device; +typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, + u32 events, void *context); + +/** + * struct mei_cl_device - MEI device handle + * An mei_cl_device pointer is returned from mei_add_device() + * and links MEI bus clients to their actual ME host client pointer. + * Drivers for MEI devices will get an mei_cl_device pointer + * when being probed and shall use it for doing ME bus I/O. + * + * @dev: linux driver model device pointer + * @me_cl: me client + * @cl: mei client + * @name: device name + * @event_work: async work to execute event callback + * @event_cb: Drivers register this callback to get asynchronous ME + * events (e.g. Rx buffer pending) notifications. + * @event_context: event callback run context + * @events: Events bitmask sent to the driver. + * @priv_data: client private data + */ +struct mei_cl_device { + struct device dev; + + struct mei_me_client *me_cl; + struct mei_cl *cl; + char name[MEI_CL_NAME_SIZE]; + + struct work_struct event_work; + mei_cl_event_cb_t event_cb; + void *event_context; + unsigned long events; + + void *priv_data; +}; + struct mei_cl_driver { struct device_driver driver; const char *name; @@ -28,8 +64,6 @@ void mei_cl_driver_unregister(struct mei_cl_driver *driver); ssize_t mei_cl_send(struct mei_cl_device *device, u8 *buf, size_t length); ssize_t mei_cl_recv(struct mei_cl_device *device, u8 *buf, size_t length); -typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, - u32 events, void *context); int mei_cl_register_event_cb(struct mei_cl_device *device, mei_cl_event_cb_t read_cb, void *context); diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index f6722677e6d0..43db4faad143 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -121,6 +121,9 @@ struct arizona_pdata { /** GPIO used for mic isolation with HPDET */ int hpdet_id_gpio; + /** Channel to use for headphone detection */ + unsigned int hpdet_channel; + /** Extra debounce timeout used during initial mic detection (ms) */ int micd_detect_debounce; diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 02f97dc568ac..c2aa853fb412 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -368,4 +368,9 @@ struct axp20x_chrg_pdata { int def_cv; }; +struct axp288_extcon_pdata { + /* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */ + struct gpio_desc *gpio_mux_cntl; +}; + #endif /* __LINUX_MFD_AXP20X_H */ diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 3bfd56778c29..048c270822f9 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -599,9 +599,22 @@ struct ipack_device_id { #define MEI_CL_MODULE_PREFIX "mei:" #define MEI_CL_NAME_SIZE 32 +#define MEI_CL_UUID_FMT "%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x" +#define MEI_CL_UUID_ARGS(_u) \ + _u[0], _u[1], _u[2], _u[3], _u[4], _u[5], _u[6], _u[7], \ + _u[8], _u[9], _u[10], _u[11], _u[12], _u[13], _u[14], _u[15] +/** + * struct mei_cl_device_id - MEI client device identifier + * @name: helper name + * @uuid: client uuid + * @driver_info: information used by the driver. + * + * identifies mei client device by uuid and name + */ struct mei_cl_device_id { char name[MEI_CL_NAME_SIZE]; + uuid_le uuid; kernel_ulong_t driver_info; }; diff --git a/include/linux/parport.h b/include/linux/parport.h index c22f12547324..58e3c64c6b49 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -13,6 +13,7 @@ #include <linux/wait.h> #include <linux/irqreturn.h> #include <linux/semaphore.h> +#include <linux/device.h> #include <asm/ptrace.h> #include <uapi/linux/parport.h> @@ -145,6 +146,8 @@ struct pardevice { unsigned int flags; struct pardevice *next; struct pardevice *prev; + struct device dev; + bool devmodel; struct parport_state *state; /* saved status over preemption */ wait_queue_head_t wait_q; unsigned long int time; @@ -156,6 +159,8 @@ struct pardevice { void * sysctl_table; }; +#define to_pardevice(n) container_of(n, struct pardevice, dev) + /* IEEE1284 information */ /* IEEE1284 phases. These are exposed to userland through ppdev IOCTL @@ -195,7 +200,7 @@ struct parport { * This may unfortulately be null if the * port has a legacy driver. */ - + struct device bus_dev; /* to link with the bus */ struct parport *physport; /* If this is a non-default mux parport, i.e. we're a clone of a real @@ -245,15 +250,26 @@ struct parport { struct parport *slaves[3]; }; +#define to_parport_dev(n) container_of(n, struct parport, bus_dev) + #define DEFAULT_SPIN_TIME 500 /* us */ struct parport_driver { const char *name; void (*attach) (struct parport *); void (*detach) (struct parport *); + void (*match_port)(struct parport *); + int (*probe)(struct pardevice *); + struct device_driver driver; + bool devmodel; struct list_head list; }; +#define to_parport_driver(n) container_of(n, struct parport_driver, driver) + +int parport_bus_init(void); +void parport_bus_exit(void); + /* parport_register_port registers a new parallel port at the given address (if one does not already exist) and returns a pointer to it. This entails claiming the I/O region, IRQ and DMA. NULL is returned @@ -272,10 +288,20 @@ void parport_announce_port (struct parport *port); extern void parport_remove_port(struct parport *port); /* Register a new high-level driver. */ -extern int parport_register_driver (struct parport_driver *); + +int __must_check __parport_register_driver(struct parport_driver *, + struct module *, + const char *mod_name); +/* + * parport_register_driver must be a macro so that KBUILD_MODNAME can + * be expanded + */ +#define parport_register_driver(driver) \ + __parport_register_driver(driver, THIS_MODULE, KBUILD_MODNAME) /* Unregister a high-level driver. */ extern void parport_unregister_driver (struct parport_driver *); +void parport_unregister_driver(struct parport_driver *); /* If parport_register_driver doesn't fit your needs, perhaps * parport_find_xxx does. */ @@ -288,6 +314,15 @@ extern irqreturn_t parport_irq_handler(int irq, void *dev_id); /* Reference counting for ports. */ extern struct parport *parport_get_port (struct parport *); extern void parport_put_port (struct parport *); +void parport_del_port(struct parport *); + +struct pardev_cb { + int (*preempt)(void *); + void (*wakeup)(void *); + void *private; + void (*irq_func)(void *); + unsigned int flags; +}; /* parport_register_device declares that a device is connected to a port, and tells the kernel all it needs to know. @@ -301,6 +336,10 @@ struct pardevice *parport_register_device(struct parport *port, void (*irq_func)(void *), int flags, void *handle); +struct pardevice * +parport_register_dev_model(struct parport *port, const char *name, + const struct pardev_cb *par_dev_cb, int cnt); + /* parport_unregister unlinks a device from the chain. */ extern void parport_unregister_device(struct pardevice *dev); diff --git a/include/linux/scif.h b/include/linux/scif.h new file mode 100644 index 000000000000..44f4f3898bbe --- /dev/null +++ b/include/linux/scif.h @@ -0,0 +1,993 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2014 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Intel SCIF driver. + * + */ +#ifndef __SCIF_H__ +#define __SCIF_H__ + +#include <linux/types.h> +#include <linux/poll.h> +#include <linux/scif_ioctl.h> + +#define SCIF_ACCEPT_SYNC 1 +#define SCIF_SEND_BLOCK 1 +#define SCIF_RECV_BLOCK 1 + +enum { + SCIF_PROT_READ = (1 << 0), + SCIF_PROT_WRITE = (1 << 1) +}; + +enum { + SCIF_MAP_FIXED = 0x10, + SCIF_MAP_KERNEL = 0x20, +}; + +enum { + SCIF_FENCE_INIT_SELF = (1 << 0), + SCIF_FENCE_INIT_PEER = (1 << 1), + SCIF_SIGNAL_LOCAL = (1 << 4), + SCIF_SIGNAL_REMOTE = (1 << 5) +}; + +enum { + SCIF_RMA_USECPU = (1 << 0), + SCIF_RMA_USECACHE = (1 << 1), + SCIF_RMA_SYNC = (1 << 2), + SCIF_RMA_ORDERED = (1 << 3) +}; + +/* End of SCIF Admin Reserved Ports */ +#define SCIF_ADMIN_PORT_END 1024 + +/* End of SCIF Reserved Ports */ +#define SCIF_PORT_RSVD 1088 + +typedef struct scif_endpt *scif_epd_t; + +#define SCIF_OPEN_FAILED ((scif_epd_t)-1) +#define SCIF_REGISTER_FAILED ((off_t)-1) +#define SCIF_MMAP_FAILED ((void *)-1) + +/** + * scif_open() - Create an endpoint + * + * Return: + * Upon successful completion, scif_open() returns an endpoint descriptor to + * be used in subsequent SCIF functions calls to refer to that endpoint; + * otherwise in user mode SCIF_OPEN_FAILED (that is ((scif_epd_t)-1)) is + * returned and errno is set to indicate the error; in kernel mode a NULL + * scif_epd_t is returned. + * + * Errors: + * ENOMEM - Insufficient kernel memory was available + */ +scif_epd_t scif_open(void); + +/** + * scif_bind() - Bind an endpoint to a port + * @epd: endpoint descriptor + * @pn: port number + * + * scif_bind() binds endpoint epd to port pn, where pn is a port number on the + * local node. If pn is zero, a port number greater than or equal to + * SCIF_PORT_RSVD is assigned and returned. Each endpoint may be bound to + * exactly one local port. Ports less than 1024 when requested can only be bound + * by system (or root) processes or by processes executed by privileged users. + * + * Return: + * Upon successful completion, scif_bind() returns the port number to which epd + * is bound; otherwise in user mode -1 is returned and errno is set to + * indicate the error; in kernel mode the negative of one of the following + * errors is returned. + * + * Errors: + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * EINVAL - the endpoint or the port is already bound + * EISCONN - The endpoint is already connected + * ENOSPC - No port number available for assignment + * EACCES - The port requested is protected and the user is not the superuser + */ +int scif_bind(scif_epd_t epd, u16 pn); + +/** + * scif_listen() - Listen for connections on an endpoint + * @epd: endpoint descriptor + * @backlog: maximum pending connection requests + * + * scif_listen() marks the endpoint epd as a listening endpoint - that is, as + * an endpoint that will be used to accept incoming connection requests. Once + * so marked, the endpoint is said to be in the listening state and may not be + * used as the endpoint of a connection. + * + * The endpoint, epd, must have been bound to a port. + * + * The backlog argument defines the maximum length to which the queue of + * pending connections for epd may grow. If a connection request arrives when + * the queue is full, the client may receive an error with an indication that + * the connection was refused. + * + * Return: + * Upon successful completion, scif_listen() returns 0; otherwise in user mode + * -1 is returned and errno is set to indicate the error; in kernel mode the + * negative of one of the following errors is returned. + * + * Errors: + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * EINVAL - the endpoint is not bound to a port + * EISCONN - The endpoint is already connected or listening + */ +int scif_listen(scif_epd_t epd, int backlog); + +/** + * scif_connect() - Initiate a connection on a port + * @epd: endpoint descriptor + * @dst: global id of port to which to connect + * + * The scif_connect() function requests the connection of endpoint epd to remote + * port dst. If the connection is successful, a peer endpoint, bound to dst, is + * created on node dst.node. On successful return, the connection is complete. + * + * If the endpoint epd has not already been bound to a port, scif_connect() + * will bind it to an unused local port. + * + * A connection is terminated when an endpoint of the connection is closed, + * either explicitly by scif_close(), or when a process that owns one of the + * endpoints of the connection is terminated. + * + * In user space, scif_connect() supports an asynchronous connection mode + * if the application has set the O_NONBLOCK flag on the endpoint via the + * fcntl() system call. Setting this flag will result in the calling process + * not to wait during scif_connect(). + * + * Return: + * Upon successful completion, scif_connect() returns the port ID to which the + * endpoint, epd, is bound; otherwise in user mode -1 is returned and errno is + * set to indicate the error; in kernel mode the negative of one of the + * following errors is returned. + * + * Errors: + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNREFUSED - The destination was not listening for connections or refused + * the connection request + * EINVAL - dst.port is not a valid port ID + * EISCONN - The endpoint is already connected + * ENOMEM - No buffer space is available + * ENODEV - The destination node does not exist, or the node is lost or existed, + * but is not currently in the network since it may have crashed + * ENOSPC - No port number available for assignment + * EOPNOTSUPP - The endpoint is listening and cannot be connected + */ +int scif_connect(scif_epd_t epd, struct scif_port_id *dst); + +/** + * scif_accept() - Accept a connection on an endpoint + * @epd: endpoint descriptor + * @peer: global id of port to which connected + * @newepd: new connected endpoint descriptor + * @flags: flags + * + * The scif_accept() call extracts the first connection request from the queue + * of pending connections for the port on which epd is listening. scif_accept() + * creates a new endpoint, bound to the same port as epd, and allocates a new + * SCIF endpoint descriptor, returned in newepd, for the endpoint. The new + * endpoint is connected to the endpoint through which the connection was + * requested. epd is unaffected by this call, and remains in the listening + * state. + * + * On successful return, peer holds the global port identifier (node id and + * local port number) of the port which requested the connection. + * + * A connection is terminated when an endpoint of the connection is closed, + * either explicitly by scif_close(), or when a process that owns one of the + * endpoints of the connection is terminated. + * + * The number of connections that can (subsequently) be accepted on epd is only + * limited by system resources (memory). + * + * The flags argument is formed by OR'ing together zero or more of the + * following values. + * SCIF_ACCEPT_SYNC - block until a connection request is presented. If + * SCIF_ACCEPT_SYNC is not in flags, and no pending + * connections are present on the queue, scif_accept() + * fails with an EAGAIN error + * + * In user mode, the select() and poll() functions can be used to determine + * when there is a connection request. In kernel mode, the scif_poll() + * function may be used for this purpose. A readable event will be delivered + * when a connection is requested. + * + * Return: + * Upon successful completion, scif_accept() returns 0; otherwise in user mode + * -1 is returned and errno is set to indicate the error; in kernel mode the + * negative of one of the following errors is returned. + * + * Errors: + * EAGAIN - SCIF_ACCEPT_SYNC is not set and no connections are present to be + * accepted or SCIF_ACCEPT_SYNC is not set and remote node failed to complete + * its connection request + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * EINTR - Interrupted function + * EINVAL - epd is not a listening endpoint, or flags is invalid, or peer is + * NULL, or newepd is NULL + * ENODEV - The requesting node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOMEM - Not enough space + * ENOENT - Secondary part of epd registration failed + */ +int scif_accept(scif_epd_t epd, struct scif_port_id *peer, scif_epd_t + *newepd, int flags); + +/** + * scif_close() - Close an endpoint + * @epd: endpoint descriptor + * + * scif_close() closes an endpoint and performs necessary teardown of + * facilities associated with that endpoint. + * + * If epd is a listening endpoint then it will no longer accept connection + * requests on the port to which it is bound. Any pending connection requests + * are rejected. + * + * If epd is a connected endpoint, then its peer endpoint is also closed. RMAs + * which are in-process through epd or its peer endpoint will complete before + * scif_close() returns. Registered windows of the local and peer endpoints are + * released as if scif_unregister() was called against each window. + * + * Closing a SCIF endpoint does not affect local registered memory mapped by + * a SCIF endpoint on a remote node. The local memory remains mapped by the peer + * SCIF endpoint explicitly removed by calling munmap(..) by the peer. + * + * If the peer endpoint's receive queue is not empty at the time that epd is + * closed, then the peer endpoint can be passed as the endpoint parameter to + * scif_recv() until the receive queue is empty. + * + * epd is freed and may no longer be accessed. + * + * Return: + * Upon successful completion, scif_close() returns 0; otherwise in user mode + * -1 is returned and errno is set to indicate the error; in kernel mode the + * negative of one of the following errors is returned. + * + * Errors: + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + */ +int scif_close(scif_epd_t epd); + +/** + * scif_send() - Send a message + * @epd: endpoint descriptor + * @msg: message buffer address + * @len: message length + * @flags: blocking mode flags + * + * scif_send() sends data to the peer of endpoint epd. Up to len bytes of data + * are copied from memory starting at address msg. On successful execution the + * return value of scif_send() is the number of bytes that were sent, and is + * zero if no bytes were sent because len was zero. scif_send() may be called + * only when the endpoint is in a connected state. + * + * If a scif_send() call is non-blocking, then it sends only those bytes which + * can be sent without waiting, up to a maximum of len bytes. + * + * If a scif_send() call is blocking, then it normally returns after sending + * all len bytes. If a blocking call is interrupted or the connection is + * reset, the call is considered successful if some bytes were sent or len is + * zero, otherwise the call is considered unsuccessful. + * + * In user mode, the select() and poll() functions can be used to determine + * when the send queue is not full. In kernel mode, the scif_poll() function + * may be used for this purpose. + * + * It is recommended that scif_send()/scif_recv() only be used for short + * control-type message communication between SCIF endpoints. The SCIF RMA + * APIs are expected to provide better performance for transfer sizes of + * 1024 bytes or longer for the current MIC hardware and software + * implementation. + * + * scif_send() will block until the entire message is sent if SCIF_SEND_BLOCK + * is passed as the flags argument. + * + * Return: + * Upon successful completion, scif_send() returns the number of bytes sent; + * otherwise in user mode -1 is returned and errno is set to indicate the + * error; in kernel mode the negative of one of the following errors is + * returned. + * + * Errors: + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EFAULT - An invalid address was specified for a parameter + * EINVAL - flags is invalid, or len is negative + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOMEM - Not enough space + * ENOTCONN - The endpoint is not connected + */ +int scif_send(scif_epd_t epd, void *msg, int len, int flags); + +/** + * scif_recv() - Receive a message + * @epd: endpoint descriptor + * @msg: message buffer address + * @len: message buffer length + * @flags: blocking mode flags + * + * scif_recv() receives data from the peer of endpoint epd. Up to len bytes of + * data are copied to memory starting at address msg. On successful execution + * the return value of scif_recv() is the number of bytes that were received, + * and is zero if no bytes were received because len was zero. scif_recv() may + * be called only when the endpoint is in a connected state. + * + * If a scif_recv() call is non-blocking, then it receives only those bytes + * which can be received without waiting, up to a maximum of len bytes. + * + * If a scif_recv() call is blocking, then it normally returns after receiving + * all len bytes. If the blocking call was interrupted due to a disconnection, + * subsequent calls to scif_recv() will copy all bytes received upto the point + * of disconnection. + * + * In user mode, the select() and poll() functions can be used to determine + * when data is available to be received. In kernel mode, the scif_poll() + * function may be used for this purpose. + * + * It is recommended that scif_send()/scif_recv() only be used for short + * control-type message communication between SCIF endpoints. The SCIF RMA + * APIs are expected to provide better performance for transfer sizes of + * 1024 bytes or longer for the current MIC hardware and software + * implementation. + * + * scif_recv() will block until the entire message is received if + * SCIF_RECV_BLOCK is passed as the flags argument. + * + * Return: + * Upon successful completion, scif_recv() returns the number of bytes + * received; otherwise in user mode -1 is returned and errno is set to + * indicate the error; in kernel mode the negative of one of the following + * errors is returned. + * + * Errors: + * EAGAIN - The destination node is returning from a low power state + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EFAULT - An invalid address was specified for a parameter + * EINVAL - flags is invalid, or len is negative + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOMEM - Not enough space + * ENOTCONN - The endpoint is not connected + */ +int scif_recv(scif_epd_t epd, void *msg, int len, int flags); + +/** + * scif_register() - Mark a memory region for remote access. + * @epd: endpoint descriptor + * @addr: starting virtual address + * @len: length of range + * @offset: offset of window + * @prot_flags: read/write protection flags + * @map_flags: mapping flags + * + * The scif_register() function opens a window, a range of whole pages of the + * registered address space of the endpoint epd, starting at offset po and + * continuing for len bytes. The value of po, further described below, is a + * function of the parameters offset and len, and the value of map_flags. Each + * page of the window represents the physical memory page which backs the + * corresponding page of the range of virtual address pages starting at addr + * and continuing for len bytes. addr and len are constrained to be multiples + * of the page size. A successful scif_register() call returns po. + * + * When SCIF_MAP_FIXED is set in the map_flags argument, po will be offset + * exactly, and offset is constrained to be a multiple of the page size. The + * mapping established by scif_register() will not replace any existing + * registration; an error is returned if any page within the range [offset, + * offset + len - 1] intersects an existing window. + * + * When SCIF_MAP_FIXED is not set, the implementation uses offset in an + * implementation-defined manner to arrive at po. The po value so chosen will + * be an area of the registered address space that the implementation deems + * suitable for a mapping of len bytes. An offset value of 0 is interpreted as + * granting the implementation complete freedom in selecting po, subject to + * constraints described below. A non-zero value of offset is taken to be a + * suggestion of an offset near which the mapping should be placed. When the + * implementation selects a value for po, it does not replace any extant + * window. In all cases, po will be a multiple of the page size. + * + * The physical pages which are so represented by a window are available for + * access in calls to mmap(), scif_readfrom(), scif_writeto(), + * scif_vreadfrom(), and scif_vwriteto(). While a window is registered, the + * physical pages represented by the window will not be reused by the memory + * subsystem for any other purpose. Note that the same physical page may be + * represented by multiple windows. + * + * Subsequent operations which change the memory pages to which virtual + * addresses are mapped (such as mmap(), munmap()) have no effect on + * existing window. + * + * If the process will fork(), it is recommended that the registered + * virtual address range be marked with MADV_DONTFORK. Doing so will prevent + * problems due to copy-on-write semantics. + * + * The prot_flags argument is formed by OR'ing together one or more of the + * following values. + * SCIF_PROT_READ - allow read operations from the window + * SCIF_PROT_WRITE - allow write operations to the window + * + * The map_flags argument can be set to SCIF_MAP_FIXED which interprets a + * fixed offset. + * + * Return: + * Upon successful completion, scif_register() returns the offset at which the + * mapping was placed (po); otherwise in user mode SCIF_REGISTER_FAILED (that + * is (off_t *)-1) is returned and errno is set to indicate the error; in + * kernel mode the negative of one of the following errors is returned. + * + * Errors: + * EADDRINUSE - SCIF_MAP_FIXED is set in map_flags, and pages in the range + * [offset, offset + len -1] are already registered + * EAGAIN - The mapping could not be performed due to lack of resources + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EFAULT - Addresses in the range [addr, addr + len - 1] are invalid + * EINVAL - map_flags is invalid, or prot_flags is invalid, or SCIF_MAP_FIXED is + * set in flags, and offset is not a multiple of the page size, or addr is not a + * multiple of the page size, or len is not a multiple of the page size, or is + * 0, or offset is negative + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOMEM - Not enough space + * ENOTCONN -The endpoint is not connected + */ +off_t scif_register(scif_epd_t epd, void *addr, size_t len, off_t offset, + int prot_flags, int map_flags); + +/** + * scif_unregister() - Mark a memory region for remote access. + * @epd: endpoint descriptor + * @offset: start of range to unregister + * @len: length of range to unregister + * + * The scif_unregister() function closes those previously registered windows + * which are entirely within the range [offset, offset + len - 1]. It is an + * error to specify a range which intersects only a subrange of a window. + * + * On a successful return, pages within the window may no longer be specified + * in calls to mmap(), scif_readfrom(), scif_writeto(), scif_vreadfrom(), + * scif_vwriteto(), scif_get_pages, and scif_fence_signal(). The window, + * however, continues to exist until all previous references against it are + * removed. A window is referenced if there is a mapping to it created by + * mmap(), or if scif_get_pages() was called against the window + * (and the pages have not been returned via scif_put_pages()). A window is + * also referenced while an RMA, in which some range of the window is a source + * or destination, is in progress. Finally a window is referenced while some + * offset in that window was specified to scif_fence_signal(), and the RMAs + * marked by that call to scif_fence_signal() have not completed. While a + * window is in this state, its registered address space pages are not + * available for use in a new registered window. + * + * When all such references to the window have been removed, its references to + * all the physical pages which it represents are removed. Similarly, the + * registered address space pages of the window become available for + * registration in a new window. + * + * Return: + * Upon successful completion, scif_unregister() returns 0; otherwise in user + * mode -1 is returned and errno is set to indicate the error; in kernel mode + * the negative of one of the following errors is returned. In the event of an + * error, no windows are unregistered. + * + * Errors: + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EINVAL - the range [offset, offset + len - 1] intersects a subrange of a + * window, or offset is negative + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + * ENXIO - Offsets in the range [offset, offset + len - 1] are invalid for the + * registered address space of epd + */ +int scif_unregister(scif_epd_t epd, off_t offset, size_t len); + +/** + * scif_readfrom() - Copy from a remote address space + * @epd: endpoint descriptor + * @loffset: offset in local registered address space to + * which to copy + * @len: length of range to copy + * @roffset: offset in remote registered address space + * from which to copy + * @rma_flags: transfer mode flags + * + * scif_readfrom() copies len bytes from the remote registered address space of + * the peer of endpoint epd, starting at the offset roffset to the local + * registered address space of epd, starting at the offset loffset. + * + * Each of the specified ranges [loffset, loffset + len - 1] and [roffset, + * roffset + len - 1] must be within some registered window or windows of the + * local and remote nodes. A range may intersect multiple registered windows, + * but only if those windows are contiguous in the registered address space. + * + * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using + * programmed read/writes. Otherwise the data is copied using DMA. If rma_- + * flags includes SCIF_RMA_SYNC, then scif_readfrom() will return after the + * transfer is complete. Otherwise, the transfer may be performed asynchron- + * ously. The order in which any two asynchronous RMA operations complete + * is non-deterministic. The synchronization functions, scif_fence_mark()/ + * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to + * the completion of asynchronous RMA operations on the same endpoint. + * + * The DMA transfer of individual bytes is not guaranteed to complete in + * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last + * cacheline or partial cacheline of the source range will become visible on + * the destination node after all other transferred data in the source + * range has become visible on the destination node. + * + * The optimal DMA performance will likely be realized if both + * loffset and roffset are cacheline aligned (are a multiple of 64). Lower + * performance will likely be realized if loffset and roffset are not + * cacheline aligned but are separated by some multiple of 64. The lowest level + * of performance is likely if loffset and roffset are not separated by a + * multiple of 64. + * + * The rma_flags argument is formed by ORing together zero or more of the + * following values. + * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA + * engine. + * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the + * transfer has completed. Passing this flag results in the + * current implementation busy waiting and consuming CPU cycles + * while the DMA transfer is in progress for best performance by + * avoiding the interrupt latency. + * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of + * the source range becomes visible on the destination node + * after all other transferred data in the source range has + * become visible on the destination + * + * Return: + * Upon successful completion, scif_readfrom() returns 0; otherwise in user + * mode -1 is returned and errno is set to indicate the error; in kernel mode + * the negative of one of the following errors is returned. + * + * Errors: + * EACCESS - Attempt to write to a read-only range + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EINVAL - rma_flags is invalid + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + * ENXIO - The range [loffset, loffset + len - 1] is invalid for the registered + * address space of epd, or, The range [roffset, roffset + len - 1] is invalid + * for the registered address space of the peer of epd, or loffset or roffset + * is negative + */ +int scif_readfrom(scif_epd_t epd, off_t loffset, size_t len, off_t + roffset, int rma_flags); + +/** + * scif_writeto() - Copy to a remote address space + * @epd: endpoint descriptor + * @loffset: offset in local registered address space + * from which to copy + * @len: length of range to copy + * @roffset: offset in remote registered address space to + * which to copy + * @rma_flags: transfer mode flags + * + * scif_writeto() copies len bytes from the local registered address space of + * epd, starting at the offset loffset to the remote registered address space + * of the peer of endpoint epd, starting at the offset roffset. + * + * Each of the specified ranges [loffset, loffset + len - 1] and [roffset, + * roffset + len - 1] must be within some registered window or windows of the + * local and remote nodes. A range may intersect multiple registered windows, + * but only if those windows are contiguous in the registered address space. + * + * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using + * programmed read/writes. Otherwise the data is copied using DMA. If rma_- + * flags includes SCIF_RMA_SYNC, then scif_writeto() will return after the + * transfer is complete. Otherwise, the transfer may be performed asynchron- + * ously. The order in which any two asynchronous RMA operations complete + * is non-deterministic. The synchronization functions, scif_fence_mark()/ + * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to + * the completion of asynchronous RMA operations on the same endpoint. + * + * The DMA transfer of individual bytes is not guaranteed to complete in + * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last + * cacheline or partial cacheline of the source range will become visible on + * the destination node after all other transferred data in the source + * range has become visible on the destination node. + * + * The optimal DMA performance will likely be realized if both + * loffset and roffset are cacheline aligned (are a multiple of 64). Lower + * performance will likely be realized if loffset and roffset are not cacheline + * aligned but are separated by some multiple of 64. The lowest level of + * performance is likely if loffset and roffset are not separated by a multiple + * of 64. + * + * The rma_flags argument is formed by ORing together zero or more of the + * following values. + * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA + * engine. + * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the + * transfer has completed. Passing this flag results in the + * current implementation busy waiting and consuming CPU cycles + * while the DMA transfer is in progress for best performance by + * avoiding the interrupt latency. + * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of + * the source range becomes visible on the destination node + * after all other transferred data in the source range has + * become visible on the destination + * + * Return: + * Upon successful completion, scif_readfrom() returns 0; otherwise in user + * mode -1 is returned and errno is set to indicate the error; in kernel mode + * the negative of one of the following errors is returned. + * + * Errors: + * EACCESS - Attempt to write to a read-only range + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EINVAL - rma_flags is invalid + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + * ENXIO - The range [loffset, loffset + len - 1] is invalid for the registered + * address space of epd, or, The range [roffset , roffset + len -1] is invalid + * for the registered address space of the peer of epd, or loffset or roffset + * is negative + */ +int scif_writeto(scif_epd_t epd, off_t loffset, size_t len, off_t + roffset, int rma_flags); + +/** + * scif_vreadfrom() - Copy from a remote address space + * @epd: endpoint descriptor + * @addr: address to which to copy + * @len: length of range to copy + * @roffset: offset in remote registered address space + * from which to copy + * @rma_flags: transfer mode flags + * + * scif_vreadfrom() copies len bytes from the remote registered address + * space of the peer of endpoint epd, starting at the offset roffset, to local + * memory, starting at addr. + * + * The specified range [roffset, roffset + len - 1] must be within some + * registered window or windows of the remote nodes. The range may + * intersect multiple registered windows, but only if those windows are + * contiguous in the registered address space. + * + * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using + * programmed read/writes. Otherwise the data is copied using DMA. If rma_- + * flags includes SCIF_RMA_SYNC, then scif_vreadfrom() will return after the + * transfer is complete. Otherwise, the transfer may be performed asynchron- + * ously. The order in which any two asynchronous RMA operations complete + * is non-deterministic. The synchronization functions, scif_fence_mark()/ + * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to + * the completion of asynchronous RMA operations on the same endpoint. + * + * The DMA transfer of individual bytes is not guaranteed to complete in + * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last + * cacheline or partial cacheline of the source range will become visible on + * the destination node after all other transferred data in the source + * range has become visible on the destination node. + * + * If rma_flags includes SCIF_RMA_USECACHE, then the physical pages which back + * the specified local memory range may be remain in a pinned state even after + * the specified transfer completes. This may reduce overhead if some or all of + * the same virtual address range is referenced in a subsequent call of + * scif_vreadfrom() or scif_vwriteto(). + * + * The optimal DMA performance will likely be realized if both + * addr and roffset are cacheline aligned (are a multiple of 64). Lower + * performance will likely be realized if addr and roffset are not + * cacheline aligned but are separated by some multiple of 64. The lowest level + * of performance is likely if addr and roffset are not separated by a + * multiple of 64. + * + * The rma_flags argument is formed by ORing together zero or more of the + * following values. + * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA + * engine. + * SCIF_RMA_USECACHE - enable registration caching + * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the + * transfer has completed. Passing this flag results in the + * current implementation busy waiting and consuming CPU cycles + * while the DMA transfer is in progress for best performance by + * avoiding the interrupt latency. + * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of + * the source range becomes visible on the destination node + * after all other transferred data in the source range has + * become visible on the destination + * + * Return: + * Upon successful completion, scif_vreadfrom() returns 0; otherwise in user + * mode -1 is returned and errno is set to indicate the error; in kernel mode + * the negative of one of the following errors is returned. + * + * Errors: + * EACCESS - Attempt to write to a read-only range + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EFAULT - Addresses in the range [addr, addr + len - 1] are invalid + * EINVAL - rma_flags is invalid + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + * ENXIO - Offsets in the range [roffset, roffset + len - 1] are invalid for the + * registered address space of epd + */ +int scif_vreadfrom(scif_epd_t epd, void *addr, size_t len, off_t roffset, + int rma_flags); + +/** + * scif_vwriteto() - Copy to a remote address space + * @epd: endpoint descriptor + * @addr: address from which to copy + * @len: length of range to copy + * @roffset: offset in remote registered address space to + * which to copy + * @rma_flags: transfer mode flags + * + * scif_vwriteto() copies len bytes from the local memory, starting at addr, to + * the remote registered address space of the peer of endpoint epd, starting at + * the offset roffset. + * + * The specified range [roffset, roffset + len - 1] must be within some + * registered window or windows of the remote nodes. The range may intersect + * multiple registered windows, but only if those windows are contiguous in the + * registered address space. + * + * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using + * programmed read/writes. Otherwise the data is copied using DMA. If rma_- + * flags includes SCIF_RMA_SYNC, then scif_vwriteto() will return after the + * transfer is complete. Otherwise, the transfer may be performed asynchron- + * ously. The order in which any two asynchronous RMA operations complete + * is non-deterministic. The synchronization functions, scif_fence_mark()/ + * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to + * the completion of asynchronous RMA operations on the same endpoint. + * + * The DMA transfer of individual bytes is not guaranteed to complete in + * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last + * cacheline or partial cacheline of the source range will become visible on + * the destination node after all other transferred data in the source + * range has become visible on the destination node. + * + * If rma_flags includes SCIF_RMA_USECACHE, then the physical pages which back + * the specified local memory range may be remain in a pinned state even after + * the specified transfer completes. This may reduce overhead if some or all of + * the same virtual address range is referenced in a subsequent call of + * scif_vreadfrom() or scif_vwriteto(). + * + * The optimal DMA performance will likely be realized if both + * addr and offset are cacheline aligned (are a multiple of 64). Lower + * performance will likely be realized if addr and offset are not cacheline + * aligned but are separated by some multiple of 64. The lowest level of + * performance is likely if addr and offset are not separated by a multiple of + * 64. + * + * The rma_flags argument is formed by ORing together zero or more of the + * following values. + * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA + * engine. + * SCIF_RMA_USECACHE - allow registration caching + * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the + * transfer has completed. Passing this flag results in the + * current implementation busy waiting and consuming CPU cycles + * while the DMA transfer is in progress for best performance by + * avoiding the interrupt latency. + * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of + * the source range becomes visible on the destination node + * after all other transferred data in the source range has + * become visible on the destination + * + * Return: + * Upon successful completion, scif_vwriteto() returns 0; otherwise in user + * mode -1 is returned and errno is set to indicate the error; in kernel mode + * the negative of one of the following errors is returned. + * + * Errors: + * EACCESS - Attempt to write to a read-only range + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EFAULT - Addresses in the range [addr, addr + len - 1] are invalid + * EINVAL - rma_flags is invalid + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + * ENXIO - Offsets in the range [roffset, roffset + len - 1] are invalid for the + * registered address space of epd + */ +int scif_vwriteto(scif_epd_t epd, void *addr, size_t len, off_t roffset, + int rma_flags); + +/** + * scif_fence_mark() - Mark previously issued RMAs + * @epd: endpoint descriptor + * @flags: control flags + * @mark: marked value returned as output. + * + * scif_fence_mark() returns after marking the current set of all uncompleted + * RMAs initiated through the endpoint epd or the current set of all + * uncompleted RMAs initiated through the peer of endpoint epd. The RMAs are + * marked with a value returned at mark. The application may subsequently call + * scif_fence_wait(), passing the value returned at mark, to await completion + * of all RMAs so marked. + * + * The flags argument has exactly one of the following values. + * SCIF_FENCE_INIT_SELF - RMA operations initiated through endpoint + * epd are marked + * SCIF_FENCE_INIT_PEER - RMA operations initiated through the peer + * of endpoint epd are marked + * + * Return: + * Upon successful completion, scif_fence_mark() returns 0; otherwise in user + * mode -1 is returned and errno is set to indicate the error; in kernel mode + * the negative of one of the following errors is returned. + * + * Errors: + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EINVAL - flags is invalid + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + * ENOMEM - Insufficient kernel memory was available + */ +int scif_fence_mark(scif_epd_t epd, int flags, int *mark); + +/** + * scif_fence_wait() - Wait for completion of marked RMAs + * @epd: endpoint descriptor + * @mark: mark request + * + * scif_fence_wait() returns after all RMAs marked with mark have completed. + * The value passed in mark must have been obtained in a previous call to + * scif_fence_mark(). + * + * Return: + * Upon successful completion, scif_fence_wait() returns 0; otherwise in user + * mode -1 is returned and errno is set to indicate the error; in kernel mode + * the negative of one of the following errors is returned. + * + * Errors: + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + * ENOMEM - Insufficient kernel memory was available + */ +int scif_fence_wait(scif_epd_t epd, int mark); + +/** + * scif_fence_signal() - Request a memory update on completion of RMAs + * @epd: endpoint descriptor + * @loff: local offset + * @lval: local value to write to loffset + * @roff: remote offset + * @rval: remote value to write to roffset + * @flags: flags + * + * scif_fence_signal() returns after marking the current set of all uncompleted + * RMAs initiated through the endpoint epd or marking the current set of all + * uncompleted RMAs initiated through the peer of endpoint epd. + * + * If flags includes SCIF_SIGNAL_LOCAL, then on completion of the RMAs in the + * marked set, lval is written to memory at the address corresponding to offset + * loff in the local registered address space of epd. loff must be within a + * registered window. If flags includes SCIF_SIGNAL_REMOTE, then on completion + * of the RMAs in the marked set, rval is written to memory at the address + * corresponding to offset roff in the remote registered address space of epd. + * roff must be within a remote registered window of the peer of epd. Note + * that any specified offset must be DWORD (4 byte / 32 bit) aligned. + * + * The flags argument is formed by OR'ing together the following. + * Exactly one of the following values. + * SCIF_FENCE_INIT_SELF - RMA operations initiated through endpoint + * epd are marked + * SCIF_FENCE_INIT_PEER - RMA operations initiated through the peer + * of endpoint epd are marked + * One or more of the following values. + * SCIF_SIGNAL_LOCAL - On completion of the marked set of RMAs, write lval to + * memory at the address corresponding to offset loff in the local + * registered address space of epd. + * SCIF_SIGNAL_REMOTE - On completion of the marked set of RMAs, write rval to + * memory at the address corresponding to offset roff in the remote + * registered address space of epd. + * + * Return: + * Upon successful completion, scif_fence_signal() returns 0; otherwise in + * user mode -1 is returned and errno is set to indicate the error; in kernel + * mode the negative of one of the following errors is returned. + * + * Errors: + * EBADF, ENOTTY - epd is not a valid endpoint descriptor + * ECONNRESET - Connection reset by peer + * EINVAL - flags is invalid, or loff or roff are not DWORD aligned + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + * ENXIO - loff is invalid for the registered address of epd, or roff is invalid + * for the registered address space, of the peer of epd + */ +int scif_fence_signal(scif_epd_t epd, off_t loff, u64 lval, off_t roff, + u64 rval, int flags); + +/** + * scif_get_node_ids() - Return information about online nodes + * @nodes: array in which to return online node IDs + * @len: number of entries in the nodes array + * @self: address to place the node ID of the local node + * + * scif_get_node_ids() fills in the nodes array with up to len node IDs of the + * nodes in the SCIF network. If there is not enough space in nodes, as + * indicated by the len parameter, only len node IDs are returned in nodes. The + * return value of scif_get_node_ids() is the total number of nodes currently in + * the SCIF network. By checking the return value against the len parameter, + * the user may determine if enough space for nodes was allocated. + * + * The node ID of the local node is returned at self. + * + * Return: + * Upon successful completion, scif_get_node_ids() returns the actual number of + * online nodes in the SCIF network including 'self'; otherwise in user mode + * -1 is returned and errno is set to indicate the error; in kernel mode no + * errors are returned. + * + * Errors: + * EFAULT - Bad address + */ +int scif_get_node_ids(u16 *nodes, int len, u16 *self); + +#endif /* __SCIF_H__ */ diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 4460e5820b0e..baa7c80da6af 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -352,6 +352,7 @@ header-y += rtc.h header-y += rtnetlink.h header-y += scc.h header-y += sched.h +header-y += scif_ioctl.h header-y += screen_info.h header-y += sctp.h header-y += sdla.h diff --git a/include/uapi/linux/hyperv.h b/include/uapi/linux/hyperv.h index bb1cb73c927a..e4c0a35d6417 100644 --- a/include/uapi/linux/hyperv.h +++ b/include/uapi/linux/hyperv.h @@ -45,6 +45,11 @@ #define VSS_OP_REGISTER 128 +/* + Daemon code with full handshake support. + */ +#define VSS_OP_REGISTER1 129 + enum hv_vss_op { VSS_OP_CREATE = 0, VSS_OP_DELETE, @@ -100,7 +105,8 @@ struct hv_vss_msg { */ #define FCOPY_VERSION_0 0 -#define FCOPY_CURRENT_VERSION FCOPY_VERSION_0 +#define FCOPY_VERSION_1 1 +#define FCOPY_CURRENT_VERSION FCOPY_VERSION_1 #define W_MAX_PATH 260 enum hv_fcopy_op { diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h index 6eb40244e019..302a2ced373c 100644 --- a/include/uapi/linux/mic_common.h +++ b/include/uapi/linux/mic_common.h @@ -80,6 +80,12 @@ struct mic_device_ctrl { * @h2c_config_db: Host to Card Virtio config doorbell set by card * @shutdown_status: Card shutdown status set by card * @shutdown_card: Set to 1 by the host when a card shutdown is initiated + * @tot_nodes: Total number of nodes in the SCIF network + * @node_id: Unique id of the node + * @h2c_scif_db - Host to card SCIF doorbell set by card + * @c2h_scif_db - Card to host SCIF doorbell set by host + * @scif_host_dma_addr - SCIF host queue pair DMA address + * @scif_card_dma_addr - SCIF card queue pair DMA address */ struct mic_bootparam { __le32 magic; @@ -88,6 +94,12 @@ struct mic_bootparam { __s8 h2c_config_db; __u8 shutdown_status; __u8 shutdown_card; + __u8 tot_nodes; + __u8 node_id; + __u8 h2c_scif_db; + __u8 c2h_scif_db; + __u64 scif_host_dma_addr; + __u64 scif_card_dma_addr; } __attribute__ ((aligned(8))); /** diff --git a/include/uapi/linux/scif_ioctl.h b/include/uapi/linux/scif_ioctl.h new file mode 100644 index 000000000000..4a94d917cf99 --- /dev/null +++ b/include/uapi/linux/scif_ioctl.h @@ -0,0 +1,130 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2014 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Intel SCIF driver. + * + */ +/* + * ----------------------------------------- + * SCIF IOCTL interface information + * ----------------------------------------- + */ +#ifndef SCIF_IOCTL_H +#define SCIF_IOCTL_H + +#include <linux/types.h> + +/** + * struct scif_port_id - SCIF port information + * @node: node on which port resides + * @port: local port number + */ +struct scif_port_id { + __u16 node; + __u16 port; +}; + +/** + * struct scifioctl_connect - used for SCIF_CONNECT IOCTL + * @self: used to read back the assigned port_id + * @peer: destination node and port to connect to + */ +struct scifioctl_connect { + struct scif_port_id self; + struct scif_port_id peer; +}; + +/** + * struct scifioctl_accept - used for SCIF_ACCEPTREQ IOCTL + * @flags: flags + * @peer: global id of peer endpoint + * @endpt: new connected endpoint descriptor + */ +struct scifioctl_accept { + __s32 flags; + struct scif_port_id peer; + __u64 endpt; +}; + +/** + * struct scifioctl_msg - used for SCIF_SEND/SCIF_RECV IOCTL + * @msg: message buffer address + * @len: message length + * @flags: flags + * @out_len: number of bytes sent/received + */ +struct scifioctl_msg { + __u64 msg; + __s32 len; + __s32 flags; + __s32 out_len; +}; + +/** + * struct scifioctl_node_ids - used for SCIF_GET_NODEIDS IOCTL + * @nodes: pointer to an array of node_ids + * @self: ID of the current node + * @len: length of array + */ +struct scifioctl_node_ids { + __u64 nodes; + __u64 self; + __s32 len; +}; + +#define SCIF_BIND _IOWR('s', 1, __u64) +#define SCIF_LISTEN _IOW('s', 2, __s32) +#define SCIF_CONNECT _IOWR('s', 3, struct scifioctl_connect) +#define SCIF_ACCEPTREQ _IOWR('s', 4, struct scifioctl_accept) +#define SCIF_ACCEPTREG _IOWR('s', 5, __u64) +#define SCIF_SEND _IOWR('s', 6, struct scifioctl_msg) +#define SCIF_RECV _IOWR('s', 7, struct scifioctl_msg) +#define SCIF_GET_NODEIDS _IOWR('s', 14, struct scifioctl_node_ids) + +#endif /* SCIF_IOCTL_H */ |