diff options
Diffstat (limited to 'include')
180 files changed, 5116 insertions, 2007 deletions
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 8de4fa90e8c4..b43276f339ef 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -208,7 +208,10 @@ struct acpi_device_flags { u32 visited:1; u32 hotplug_notify:1; u32 is_dock_station:1; - u32 reserved:23; + u32 of_compatible_ok:1; + u32 coherent_dma:1; + u32 cca_seen:1; + u32 reserved:20; }; /* File System */ @@ -271,7 +274,6 @@ struct acpi_device_power_flags { struct acpi_device_power_state { struct { u8 valid:1; - u8 os_accessible:1; u8 explicit_set:1; /* _PSx present? */ u8 reserved:6; } flags; @@ -380,6 +382,39 @@ struct acpi_device { void (*remove)(struct acpi_device *); }; +static inline bool acpi_check_dma(struct acpi_device *adev, bool *coherent) +{ + bool ret = false; + + if (!adev) + return ret; + + /** + * Currently, we only support _CCA=1 (i.e. coherent_dma=1) + * This should be equivalent to specifyig dma-coherent for + * a device in OF. + * + * For the case when _CCA=0 (i.e. coherent_dma=0 && cca_seen=1), + * There are two cases: + * case 1. Do not support and disable DMA. + * case 2. Support but rely on arch-specific cache maintenance for + * non-coherence DMA operations. + * Currently, we implement case 1 above. + * + * For the case when _CCA is missing (i.e. cca_seen=0) and + * platform specifies ACPI_CCA_REQUIRED, we do not support DMA, + * and fallback to arch-specific default handling. + * + * See acpi_init_coherency() for more info. + */ + if (adev->flags.coherent_dma) { + ret = true; + if (coherent) + *coherent = adev->flags.coherent_dma; + } + return ret; +} + static inline bool is_acpi_node(struct fwnode_handle *fwnode) { return fwnode && fwnode->type == FWNODE_ACPI; @@ -601,7 +636,7 @@ static inline bool acpi_device_can_wakeup(struct acpi_device *adev) static inline bool acpi_device_can_poweroff(struct acpi_device *adev) { - return adev->power.states[ACPI_STATE_D3_COLD].flags.os_accessible; + return adev->power.states[ACPI_STATE_D3_COLD].flags.valid; } #else /* CONFIG_ACPI */ diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 0bc78df66d4b..d02df0a49d98 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -95,7 +95,7 @@ acpi_physical_address acpi_os_get_root_pointer(void); #ifndef ACPI_USE_ALTERNATE_PROTOTYPE_acpi_os_predefined_override acpi_status acpi_os_predefined_override(const struct acpi_predefined_names *init_val, - acpi_string * new_val); + char **new_val); #endif #ifndef ACPI_USE_ALTERNATE_PROTOTYPE_acpi_os_table_override diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 08ef57bc8d63..d68f1cd39c49 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -46,7 +46,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20150410 +#define ACPI_CA_VERSION 0x20150515 #include <acpi/acconfig.h> #include <acpi/actypes.h> diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index d4081fef1095..cb8a6b97ceda 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -284,6 +284,7 @@ struct acpi_table_fadt { struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */ struct acpi_generic_address sleep_control; /* 64-bit Sleep Control register (ACPI 5.0) */ struct acpi_generic_address sleep_status; /* 64-bit Sleep Status register (ACPI 5.0) */ + u64 hypervisor_id; /* Hypervisor Vendor ID (ACPI 6.0) */ }; /* Masks for FADT IA-PC Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */ @@ -341,7 +342,7 @@ enum acpi_preferred_pm_profiles { PM_TABLET = 8 }; -/* Values for sleep_status and sleep_control registers (V5 FADT) */ +/* Values for sleep_status and sleep_control registers (V5+ FADT) */ #define ACPI_X_WAKE_STATUS 0x80 #define ACPI_X_SLEEP_TYPE_MASK 0x1C @@ -398,15 +399,17 @@ struct acpi_table_desc { * FADT is the bottom line as to what the version really is. * * For reference, the values below are as follows: - * FADT V1 size: 0x074 - * FADT V2 size: 0x084 - * FADT V3 size: 0x0F4 - * FADT V4 size: 0x0F4 - * FADT V5 size: 0x10C + * FADT V1 size: 0x074 + * FADT V2 size: 0x084 + * FADT V3 size: 0x0F4 + * FADT V4 size: 0x0F4 + * FADT V5 size: 0x10C + * FADT V6 size: 0x114 */ #define ACPI_FADT_V1_SIZE (u32) (ACPI_FADT_OFFSET (flags) + 4) #define ACPI_FADT_V2_SIZE (u32) (ACPI_FADT_OFFSET (minor_revision) + 1) #define ACPI_FADT_V3_SIZE (u32) (ACPI_FADT_OFFSET (sleep_control)) -#define ACPI_FADT_V5_SIZE (u32) (sizeof (struct acpi_table_fadt)) +#define ACPI_FADT_V5_SIZE (u32) (ACPI_FADT_OFFSET (hypervisor_id)) +#define ACPI_FADT_V6_SIZE (u32) (sizeof (struct acpi_table_fadt)) #endif /* __ACTBL_H__ */ diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index b80b0e6dabc5..06b61f01ea59 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -71,6 +71,7 @@ #define ACPI_SIG_SBST "SBST" /* Smart Battery Specification Table */ #define ACPI_SIG_SLIT "SLIT" /* System Locality Distance Information Table */ #define ACPI_SIG_SRAT "SRAT" /* System Resource Affinity Table */ +#define ACPI_SIG_NFIT "NFIT" /* NVDIMM Firmware Interface Table */ /* * All tables must be byte-packed to match the ACPI specification, since @@ -673,7 +674,8 @@ enum acpi_madt_type { ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR = 12, ACPI_MADT_TYPE_GENERIC_MSI_FRAME = 13, ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR = 14, - ACPI_MADT_TYPE_RESERVED = 15 /* 15 and greater are reserved */ + ACPI_MADT_TYPE_GENERIC_TRANSLATOR = 15, + ACPI_MADT_TYPE_RESERVED = 16 /* 16 and greater are reserved */ }; /* @@ -794,7 +796,7 @@ struct acpi_madt_local_x2apic_nmi { u8 reserved[3]; /* reserved - must be zero */ }; -/* 11: Generic Interrupt (ACPI 5.0) */ +/* 11: Generic Interrupt (ACPI 5.0 + ACPI 6.0 changes) */ struct acpi_madt_generic_interrupt { struct acpi_subtable_header header; @@ -811,6 +813,8 @@ struct acpi_madt_generic_interrupt { u32 vgic_interrupt; u64 gicr_base_address; u64 arm_mpidr; + u8 efficiency_class; + u8 reserved2[3]; }; /* Masks for Flags field above */ @@ -819,7 +823,7 @@ struct acpi_madt_generic_interrupt { #define ACPI_MADT_PERFORMANCE_IRQ_MODE (1<<1) /* 01: Performance Interrupt Mode */ #define ACPI_MADT_VGIC_IRQ_MODE (1<<2) /* 02: VGIC Maintenance Interrupt mode */ -/* 12: Generic Distributor (ACPI 5.0) */ +/* 12: Generic Distributor (ACPI 5.0 + ACPI 6.0 changes) */ struct acpi_madt_generic_distributor { struct acpi_subtable_header header; @@ -827,7 +831,8 @@ struct acpi_madt_generic_distributor { u32 gic_id; u64 base_address; u32 global_irq_base; - u32 reserved2; /* reserved - must be zero */ + u8 version; + u8 reserved2[3]; /* reserved - must be zero */ }; /* 13: Generic MSI Frame (ACPI 5.1) */ @@ -855,6 +860,16 @@ struct acpi_madt_generic_redistributor { u32 length; }; +/* 15: Generic Translator (ACPI 6.0) */ + +struct acpi_madt_generic_translator { + struct acpi_subtable_header header; + u16 reserved; /* reserved - must be zero */ + u32 translation_id; + u64 base_address; + u32 reserved2; +}; + /* * Common flags fields for MADT subtables */ @@ -908,6 +923,159 @@ struct acpi_msct_proximity { /******************************************************************************* * + * NFIT - NVDIMM Interface Table (ACPI 6.0) + * Version 1 + * + ******************************************************************************/ + +struct acpi_table_nfit { + struct acpi_table_header header; /* Common ACPI table header */ + u32 reserved; /* Reserved, must be zero */ +}; + +/* Subtable header for NFIT */ + +struct acpi_nfit_header { + u16 type; + u16 length; +}; + +/* Values for subtable type in struct acpi_nfit_header */ + +enum acpi_nfit_type { + ACPI_NFIT_TYPE_SYSTEM_ADDRESS = 0, + ACPI_NFIT_TYPE_MEMORY_MAP = 1, + ACPI_NFIT_TYPE_INTERLEAVE = 2, + ACPI_NFIT_TYPE_SMBIOS = 3, + ACPI_NFIT_TYPE_CONTROL_REGION = 4, + ACPI_NFIT_TYPE_DATA_REGION = 5, + ACPI_NFIT_TYPE_FLUSH_ADDRESS = 6, + ACPI_NFIT_TYPE_RESERVED = 7 /* 7 and greater are reserved */ +}; + +/* + * NFIT Subtables + */ + +/* 0: System Physical Address Range Structure */ + +struct acpi_nfit_system_address { + struct acpi_nfit_header header; + u16 range_index; + u16 flags; + u32 reserved; /* Reseved, must be zero */ + u32 proximity_domain; + u8 range_guid[16]; + u64 address; + u64 length; + u64 memory_mapping; +}; + +/* Flags */ + +#define ACPI_NFIT_ADD_ONLINE_ONLY (1) /* 00: Add/Online Operation Only */ +#define ACPI_NFIT_PROXIMITY_VALID (1<<1) /* 01: Proximity Domain Valid */ + +/* Range Type GUIDs appear in the include/acuuid.h file */ + +/* 1: Memory Device to System Address Range Map Structure */ + +struct acpi_nfit_memory_map { + struct acpi_nfit_header header; + u32 device_handle; + u16 physical_id; + u16 region_id; + u16 range_index; + u16 region_index; + u64 region_size; + u64 region_offset; + u64 address; + u16 interleave_index; + u16 interleave_ways; + u16 flags; + u16 reserved; /* Reserved, must be zero */ +}; + +/* Flags */ + +#define ACPI_NFIT_MEM_SAVE_FAILED (1) /* 00: Last SAVE to Memory Device failed */ +#define ACPI_NFIT_MEM_RESTORE_FAILED (1<<1) /* 01: Last RESTORE from Memory Device failed */ +#define ACPI_NFIT_MEM_FLUSH_FAILED (1<<2) /* 02: Platform flush failed */ +#define ACPI_NFIT_MEM_ARMED (1<<3) /* 03: Memory Device observed to be not armed */ +#define ACPI_NFIT_MEM_HEALTH_OBSERVED (1<<4) /* 04: Memory Device observed SMART/health events */ +#define ACPI_NFIT_MEM_HEALTH_ENABLED (1<<5) /* 05: SMART/health events enabled */ + +/* 2: Interleave Structure */ + +struct acpi_nfit_interleave { + struct acpi_nfit_header header; + u16 interleave_index; + u16 reserved; /* Reserved, must be zero */ + u32 line_count; + u32 line_size; + u32 line_offset[1]; /* Variable length */ +}; + +/* 3: SMBIOS Management Information Structure */ + +struct acpi_nfit_smbios { + struct acpi_nfit_header header; + u32 reserved; /* Reserved, must be zero */ + u8 data[1]; /* Variable length */ +}; + +/* 4: NVDIMM Control Region Structure */ + +struct acpi_nfit_control_region { + struct acpi_nfit_header header; + u16 region_index; + u16 vendor_id; + u16 device_id; + u16 revision_id; + u16 subsystem_vendor_id; + u16 subsystem_device_id; + u16 subsystem_revision_id; + u8 reserved[6]; /* Reserved, must be zero */ + u32 serial_number; + u16 code; + u16 windows; + u64 window_size; + u64 command_offset; + u64 command_size; + u64 status_offset; + u64 status_size; + u16 flags; + u8 reserved1[6]; /* Reserved, must be zero */ +}; + +/* Flags */ + +#define ACPI_NFIT_CONTROL_BUFFERED (1) /* Block Data Windows implementation is buffered */ + +/* 5: NVDIMM Block Data Window Region Structure */ + +struct acpi_nfit_data_region { + struct acpi_nfit_header header; + u16 region_index; + u16 windows; + u64 offset; + u64 size; + u64 capacity; + u64 start_address; +}; + +/* 6: Flush Hint Address Structure */ + +struct acpi_nfit_flush_address { + struct acpi_nfit_header header; + u32 device_handle; + u16 hint_count; + u8 reserved[6]; /* Reserved, must be zero */ + u64 hint_address[1]; /* Variable length */ +}; + +/******************************************************************************* + * * SBST - Smart Battery Specification Table * Version 1 * diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h index cafdeb50fbdf..370d69d871a0 100644 --- a/include/acpi/actbl2.h +++ b/include/acpi/actbl2.h @@ -69,6 +69,7 @@ #define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */ #define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */ #define ACPI_SIG_IBFT "IBFT" /* iSCSI Boot Firmware Table */ +#define ACPI_SIG_IORT "IORT" /* IO Remapping Table */ #define ACPI_SIG_IVRS "IVRS" /* I/O Virtualization Reporting Structure */ #define ACPI_SIG_LPIT "LPIT" /* Low Power Idle Table */ #define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */ @@ -650,6 +651,131 @@ struct acpi_ibft_target { /******************************************************************************* * + * IORT - IO Remapping Table + * + * Conforms to "IO Remapping Table System Software on ARM Platforms", + * Document number: ARM DEN 0049A, 2015 + * + ******************************************************************************/ + +struct acpi_table_iort { + struct acpi_table_header header; + u32 node_count; + u32 node_offset; + u32 reserved; +}; + +/* + * IORT subtables + */ +struct acpi_iort_node { + u8 type; + u16 length; + u8 revision; + u32 reserved; + u32 mapping_count; + u32 mapping_offset; + char node_data[1]; +}; + +/* Values for subtable Type above */ + +enum acpi_iort_node_type { + ACPI_IORT_NODE_ITS_GROUP = 0x00, + ACPI_IORT_NODE_NAMED_COMPONENT = 0x01, + ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02, + ACPI_IORT_NODE_SMMU = 0x03 +}; + +struct acpi_iort_id_mapping { + u32 input_base; /* Lowest value in input range */ + u32 id_count; /* Number of IDs */ + u32 output_base; /* Lowest value in output range */ + u32 output_reference; /* A reference to the output node */ + u32 flags; +}; + +/* Masks for Flags field above for IORT subtable */ + +#define ACPI_IORT_ID_SINGLE_MAPPING (1) + +struct acpi_iort_memory_access { + u32 cache_coherency; + u8 hints; + u16 reserved; + u8 memory_flags; +}; + +/* Values for cache_coherency field above */ + +#define ACPI_IORT_NODE_COHERENT 0x00000001 /* The device node is fully coherent */ +#define ACPI_IORT_NODE_NOT_COHERENT 0x00000000 /* The device node is not coherent */ + +/* Masks for Hints field above */ + +#define ACPI_IORT_HT_TRANSIENT (1) +#define ACPI_IORT_HT_WRITE (1<<1) +#define ACPI_IORT_HT_READ (1<<2) +#define ACPI_IORT_HT_OVERRIDE (1<<3) + +/* Masks for memory_flags field above */ + +#define ACPI_IORT_MF_COHERENCY (1) +#define ACPI_IORT_MF_ATTRIBUTES (1<<1) + +/* + * IORT node specific subtables + */ +struct acpi_iort_its_group { + u32 its_count; + u32 identifiers[1]; /* GIC ITS identifier arrary */ +}; + +struct acpi_iort_named_component { + u32 node_flags; + u64 memory_properties; /* Memory access properties */ + u8 memory_address_limit; /* Memory address size limit */ + char device_name[1]; /* Path of namespace object */ +}; + +struct acpi_iort_root_complex { + u64 memory_properties; /* Memory access properties */ + u32 ats_attribute; + u32 pci_segment_number; +}; + +/* Values for ats_attribute field above */ + +#define ACPI_IORT_ATS_SUPPORTED 0x00000001 /* The root complex supports ATS */ +#define ACPI_IORT_ATS_UNSUPPORTED 0x00000000 /* The root complex doesn't support ATS */ + +struct acpi_iort_smmu { + u64 base_address; /* SMMU base address */ + u64 span; /* Length of memory range */ + u32 model; + u32 flags; + u32 global_interrupt_offset; + u32 context_interrupt_count; + u32 context_interrupt_offset; + u32 pmu_interrupt_count; + u32 pmu_interrupt_offset; + u64 interrupts[1]; /* Interrupt array */ +}; + +/* Values for Model field above */ + +#define ACPI_IORT_SMMU_V1 0x00000000 /* Generic SMMUv1 */ +#define ACPI_IORT_SMMU_V2 0x00000001 /* Generic SMMUv2 */ +#define ACPI_IORT_SMMU_CORELINK_MMU400 0x00000002 /* ARM Corelink MMU-400 */ +#define ACPI_IORT_SMMU_CORELINK_MMU500 0x00000003 /* ARM Corelink MMU-500 */ + +/* Masks for Flags field above */ + +#define ACPI_IORT_SMMU_DVM_SUPPORTED (1) +#define ACPI_IORT_SMMU_COHERENT_WALK (1<<1) + +/******************************************************************************* + * * IVRS - I/O Virtualization Reporting Structure * Version 1 * @@ -824,7 +950,7 @@ struct acpi_ivrs_memory { * * LPIT - Low Power Idle Table * - * Conforms to "ACPI Low Power Idle Table (LPIT) and _LPD Proposal (DRAFT)" + * Conforms to "ACPI Low Power Idle Table (LPIT)" July 2014. * ******************************************************************************/ @@ -846,8 +972,7 @@ struct acpi_lpit_header { enum acpi_lpit_type { ACPI_LPIT_TYPE_NATIVE_CSTATE = 0x00, - ACPI_LPIT_TYPE_SIMPLE_IO = 0x01, - ACPI_LPIT_TYPE_RESERVED = 0x02 /* 2 and above are reserved */ + ACPI_LPIT_TYPE_RESERVED = 0x01 /* 1 and above are reserved */ }; /* Masks for Flags field above */ @@ -870,21 +995,6 @@ struct acpi_lpit_native { u64 counter_frequency; }; -/* 0x01: Simple I/O based LPI structure */ - -struct acpi_lpit_io { - struct acpi_lpit_header header; - struct acpi_generic_address entry_trigger; - u32 trigger_action; - u64 trigger_value; - u64 trigger_mask; - struct acpi_generic_address minimum_idle_state; - u32 residency; - u32 latency; - struct acpi_generic_address residency_counter; - u64 counter_frequency; -}; - /******************************************************************************* * * MCFG - PCI Memory Mapped Configuration table and subtable diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h index 440ca8104b43..4018986d2a2e 100644 --- a/include/acpi/actbl3.h +++ b/include/acpi/actbl3.h @@ -68,7 +68,10 @@ #define ACPI_SIG_PCCT "PCCT" /* Platform Communications Channel Table */ #define ACPI_SIG_PMTT "PMTT" /* Platform Memory Topology Table */ #define ACPI_SIG_RASF "RASF" /* RAS Feature table */ +#define ACPI_SIG_STAO "STAO" /* Status Override table */ #define ACPI_SIG_TPM2 "TPM2" /* Trusted Platform Module 2.0 H/W interface table */ +#define ACPI_SIG_WPBT "WPBT" /* Windows Platform Binary Table */ +#define ACPI_SIG_XENV "XENV" /* Xen Environment table */ #define ACPI_SIG_S3PT "S3PT" /* S3 Performance (sub)Table */ #define ACPI_SIG_PCCS "PCC" /* PCC Shared Memory Region */ @@ -77,7 +80,6 @@ #define ACPI_SIG_MATR "MATR" /* Memory Address Translation Table */ #define ACPI_SIG_MSDM "MSDM" /* Microsoft Data Management Table */ -#define ACPI_SIG_WPBT "WPBT" /* Windows Platform Binary Table */ /* * All tables must be byte-packed to match the ACPI specification, since @@ -117,6 +119,8 @@ struct acpi_table_bgrt { /******************************************************************************* * * DRTM - Dynamic Root of Trust for Measurement table + * Conforms to "TCG D-RTM Architecture" June 17 2013, Version 1.0.0 + * Table version 1 * ******************************************************************************/ @@ -133,22 +137,40 @@ struct acpi_table_drtm { u32 flags; }; -/* 1) Validated Tables List */ +/* Flag Definitions for above */ + +#define ACPI_DRTM_ACCESS_ALLOWED (1) +#define ACPI_DRTM_ENABLE_GAP_CODE (1<<1) +#define ACPI_DRTM_INCOMPLETE_MEASUREMENTS (1<<2) +#define ACPI_DRTM_AUTHORITY_ORDER (1<<3) -struct acpi_drtm_vtl_list { - u32 validated_table_list_count; +/* 1) Validated Tables List (64-bit addresses) */ + +struct acpi_drtm_vtable_list { + u32 validated_table_count; + u64 validated_tables[1]; }; -/* 2) Resources List */ +/* 2) Resources List (of Resource Descriptors) */ + +/* Resource Descriptor */ + +struct acpi_drtm_resource { + u8 size[7]; + u8 type; + u64 address; +}; struct acpi_drtm_resource_list { - u32 resource_list_count; + u32 resource_count; + struct acpi_drtm_resource resources[1]; }; /* 3) Platform-specific Identifiers List */ -struct acpi_drtm_id_list { - u32 id_list_count; +struct acpi_drtm_dps_id { + u32 dps_id_length; + u8 dps_id[16]; }; /******************************************************************************* @@ -685,6 +707,21 @@ enum acpi_rasf_status { /******************************************************************************* * + * STAO - Status Override Table (_STA override) - ACPI 6.0 + * Version 1 + * + * Conforms to "ACPI Specification for Status Override Table" + * 6 January 2015 + * + ******************************************************************************/ + +struct acpi_table_stao { + struct acpi_table_header header; /* Common ACPI table header */ + u8 ignore_uart; +}; + +/******************************************************************************* + * * TPM2 - Trusted Platform Module (TPM) 2.0 Hardware Interface Table * Version 3 * @@ -713,6 +750,41 @@ struct acpi_tpm2_control { u64 response_address; }; +/******************************************************************************* + * + * WPBT - Windows Platform Environment Table (ACPI 6.0) + * Version 1 + * + * Conforms to "Windows Platform Binary Table (WPBT)" 29 November 2011 + * + ******************************************************************************/ + +struct acpi_table_wpbt { + struct acpi_table_header header; /* Common ACPI table header */ + u32 handoff_size; + u64 handoff_address; + u8 layout; + u8 type; + u16 arguments_length; +}; + +/******************************************************************************* + * + * XENV - Xen Environment Table (ACPI 6.0) + * Version 1 + * + * Conforms to "ACPI Specification for Xen Environment Table" 4 January 2015 + * + ******************************************************************************/ + +struct acpi_table_xenv { + struct acpi_table_header header; /* Common ACPI table header */ + u64 grant_table_address; + u64 grant_table_size; + u32 event_interrupt; + u8 event_flags; +}; + /* Reset to default packing */ #pragma pack() diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 1c3002e1db20..63fd7f5e9fb3 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -471,11 +471,6 @@ typedef u8 acpi_owner_id; #define ACPI_INTEGER_BIT_SIZE 64 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ - -#if ACPI_MACHINE_WIDTH == 64 -#define ACPI_USE_NATIVE_DIVIDE /* Use compiler native 64-bit divide */ -#endif - #define ACPI_MAX64_DECIMAL_DIGITS 20 #define ACPI_MAX32_DECIMAL_DIGITS 10 #define ACPI_MAX16_DECIMAL_DIGITS 5 @@ -530,6 +525,7 @@ typedef u64 acpi_integer; #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) +#define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) - (acpi_size)(b))) #define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))) /* Pointer/Integer type conversions */ diff --git a/include/acpi/acuuid.h b/include/acpi/acuuid.h new file mode 100644 index 000000000000..80fe8cf74d7a --- /dev/null +++ b/include/acpi/acuuid.h @@ -0,0 +1,89 @@ +/****************************************************************************** + * + * Name: acuuid.h - ACPI-related UUID/GUID definitions + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#ifndef __ACUUID_H__ +#define __ACUUID_H__ + +/* + * Note1: UUIDs and GUIDs are defined to be identical in ACPI. + * + * Note2: This file is standalone and should remain that way. + */ + +/* Controllers */ + +#define UUID_GPIO_CONTROLLER "4f248f40-d5e2-499f-834c-27758ea1cd3f" +#define UUID_USB_CONTROLLER "ce2ee385-00e6-48cb-9f05-2edb927c4899" +#define UUID_SATA_CONTROLLER "e4db149b-fcfe-425b-a6d8-92357d78fc7f" + +/* Devices */ + +#define UUID_PCI_HOST_BRIDGE "33db4d5b-1ff7-401c-9657-7441c03dd766" +#define UUID_I2C_DEVICE "3cdff6f7-4267-4555-ad05-b30a3d8938de" +#define UUID_POWER_BUTTON "dfbcf3c5-e7a5-44e6-9c1f-29c76f6e059c" + +/* Interfaces */ + +#define UUID_DEVICE_LABELING "e5c937d0-3553-4d7a-9117-ea4d19c3434d" +#define UUID_PHYSICAL_PRESENCE "3dddfaa6-361b-4eb4-a424-8d10089d1653" + +/* NVDIMM - NFIT table */ + +#define UUID_VOLATILE_MEMORY "7305944f-fdda-44e3-b16c-3f22d252e5d0" +#define UUID_PERSISTENT_MEMORY "66f0d379-b4f3-4074-ac43-0d3318b78cdb" +#define UUID_CONTROL_REGION "92f701f6-13b4-405d-910b-299367e8234c" +#define UUID_DATA_REGION "91af0530-5d86-470e-a6b0-0a2db9408249" +#define UUID_VOLATILE_VIRTUAL_DISK "77ab535a-45fc-624b-5560-f7b281d1f96e" +#define UUID_VOLATILE_VIRTUAL_CD "3d5abd30-4175-87ce-6d64-d2ade523c4bb" +#define UUID_PERSISTENT_VIRTUAL_DISK "5cea02c9-4d07-69d3-269f-4496fbe096f9" +#define UUID_PERSISTENT_VIRTUAL_CD "08018188-42cd-bb48-100f-5387d53ded3d" + +/* Miscellaneous */ + +#define UUID_PLATFORM_CAPABILITIES "0811b06e-4a27-44f9-8d60-3cbbc22e7b48" +#define UUID_DYNAMIC_ENUMERATION "d8c1a3a6-be9b-4c9b-91bf-c3cb81fc5daf" +#define UUID_BATTERY_THERMAL_LIMIT "4c2067e3-887d-475c-9720-4af1d3ed602e" +#define UUID_THERMAL_EXTENSIONS "14d399cd-7a27-4b18-8fb4-7cb7b9f4e500" +#define UUID_DEVICE_PROPERTIES "daffd814-6eba-4d8c-8a91-bc9bbf4aa301" + +#endif /* __AUUID_H__ */ diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h index ecdf9405dd3a..073997d729e9 100644 --- a/include/acpi/platform/acenv.h +++ b/include/acpi/platform/acenv.h @@ -175,6 +175,9 @@ #elif defined(_APPLE) || defined(__APPLE__) #include "acmacosx.h" +#elif defined(__DragonFly__) +#include "acdragonfly.h" + #elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) #include "acfreebsd.h" diff --git a/include/acpi/platform/acenvex.h b/include/acpi/platform/acenvex.h index 71e5ec5b07a3..14dc6f68ca18 100644 --- a/include/acpi/platform/acenvex.h +++ b/include/acpi/platform/acenvex.h @@ -56,6 +56,9 @@ #if defined(_LINUX) || defined(__linux__) #include <acpi/platform/aclinuxex.h> +#elif defined(__DragonFly__) +#include "acdragonflyex.h" + #endif /*! [End] no source code translation !*/ diff --git a/include/acpi/video.h b/include/acpi/video.h index 843ef1adfbfa..a7d7f1043e9c 100644 --- a/include/acpi/video.h +++ b/include/acpi/video.h @@ -16,23 +16,36 @@ struct acpi_device; #define ACPI_VIDEO_DISPLAY_LEGACY_PANEL 0x0110 #define ACPI_VIDEO_DISPLAY_LEGACY_TV 0x0200 +enum acpi_backlight_type { + acpi_backlight_undef = -1, + acpi_backlight_none = 0, + acpi_backlight_video, + acpi_backlight_vendor, + acpi_backlight_native, +}; + #if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE) extern int acpi_video_register(void); extern void acpi_video_unregister(void); -extern void acpi_video_unregister_backlight(void); extern int acpi_video_get_edid(struct acpi_device *device, int type, int device_id, void **edid); -extern bool acpi_video_verify_backlight_support(void); +extern enum acpi_backlight_type acpi_video_get_backlight_type(void); +extern void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type); #else static inline int acpi_video_register(void) { return 0; } static inline void acpi_video_unregister(void) { return; } -static inline void acpi_video_unregister_backlight(void) { return; } static inline int acpi_video_get_edid(struct acpi_device *device, int type, int device_id, void **edid) { return -ENODEV; } -static inline bool acpi_video_verify_backlight_support(void) { return false; } +static inline enum acpi_backlight_type acpi_video_get_backlight_type(void) +{ + return acpi_backlight_vendor; +} +static void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type) +{ +} #endif #endif diff --git a/include/asm-generic/barrier.h b/include/asm-generic/barrier.h index f5c40b0fadc2..e6a83d712ef6 100644 --- a/include/asm-generic/barrier.h +++ b/include/asm-generic/barrier.h @@ -66,8 +66,8 @@ #define smp_read_barrier_depends() do { } while (0) #endif -#ifndef set_mb -#define set_mb(var, value) do { (var) = (value); mb(); } while (0) +#ifndef smp_store_mb +#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); mb(); } while (0) #endif #ifndef smp_mb__before_atomic diff --git a/include/asm-generic/cmpxchg.h b/include/asm-generic/cmpxchg.h index 811fb1e9b061..3766ab34aa45 100644 --- a/include/asm-generic/cmpxchg.h +++ b/include/asm-generic/cmpxchg.h @@ -86,9 +86,6 @@ unsigned long __xchg(unsigned long x, volatile void *ptr, int size) /* * Atomic compare and exchange. - * - * Do not define __HAVE_ARCH_CMPXCHG because we want to use it to check whether - * a cmpxchg primitive faster than repeated local irq save/restore exists. */ #include <asm-generic/cmpxchg-local.h> diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 9bb0d11729c9..40ec1433f05d 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -128,11 +128,6 @@ static inline int gpio_export_link(struct device *dev, const char *name, return gpiod_export_link(dev, name, gpio_to_desc(gpio)); } -static inline int gpio_sysfs_set_active_low(unsigned gpio, int value) -{ - return gpiod_sysfs_set_active_low(gpio_to_desc(gpio), value); -} - static inline void gpio_unexport(unsigned gpio) { gpiod_unexport(gpio_to_desc(gpio)); diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index 9db042304df3..f56094cfdeff 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -769,6 +769,14 @@ static inline void __iomem *ioremap_nocache(phys_addr_t offset, size_t size) } #endif +#ifndef ioremap_uc +#define ioremap_uc ioremap_uc +static inline void __iomem *ioremap_uc(phys_addr_t offset, size_t size) +{ + return ioremap_nocache(offset, size); +} +#endif + #ifndef ioremap_wc #define ioremap_wc ioremap_wc static inline void __iomem *ioremap_wc(phys_addr_t offset, size_t size) @@ -777,8 +785,17 @@ static inline void __iomem *ioremap_wc(phys_addr_t offset, size_t size) } #endif +#ifndef ioremap_wt +#define ioremap_wt ioremap_wt +static inline void __iomem *ioremap_wt(phys_addr_t offset, size_t size) +{ + return ioremap_nocache(offset, size); +} +#endif + #ifndef iounmap #define iounmap iounmap + static inline void iounmap(void __iomem *addr) { } diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h index 1b41011643a5..d8f8622fa044 100644 --- a/include/asm-generic/iomap.h +++ b/include/asm-generic/iomap.h @@ -66,6 +66,10 @@ extern void ioport_unmap(void __iomem *); #define ioremap_wc ioremap_nocache #endif +#ifndef ARCH_HAS_IOREMAP_WT +#define ioremap_wt ioremap_nocache +#endif + #ifdef CONFIG_PCI /* Destroy a virtual mapping cookie for a PCI BAR (memory or IO) */ struct pci_dev; diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h index e80a0495e5b0..f24bc519bf31 100644 --- a/include/asm-generic/pci.h +++ b/include/asm-generic/pci.h @@ -6,19 +6,6 @@ #ifndef _ASM_GENERIC_PCI_H #define _ASM_GENERIC_PCI_H -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - #ifndef HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) { diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 39f1d6a2b04d..bd910ceaccfa 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -262,6 +262,10 @@ static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b) #define pgprot_writecombine pgprot_noncached #endif +#ifndef pgprot_writethrough +#define pgprot_writethrough pgprot_noncached +#endif + #ifndef pgprot_device #define pgprot_device pgprot_noncached #endif diff --git a/include/asm-generic/qspinlock.h b/include/asm-generic/qspinlock.h new file mode 100644 index 000000000000..83bfb87f5bf1 --- /dev/null +++ b/include/asm-generic/qspinlock.h @@ -0,0 +1,139 @@ +/* + * Queued spinlock + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P. + * + * Authors: Waiman Long <waiman.long@hp.com> + */ +#ifndef __ASM_GENERIC_QSPINLOCK_H +#define __ASM_GENERIC_QSPINLOCK_H + +#include <asm-generic/qspinlock_types.h> + +/** + * queued_spin_is_locked - is the spinlock locked? + * @lock: Pointer to queued spinlock structure + * Return: 1 if it is locked, 0 otherwise + */ +static __always_inline int queued_spin_is_locked(struct qspinlock *lock) +{ + return atomic_read(&lock->val); +} + +/** + * queued_spin_value_unlocked - is the spinlock structure unlocked? + * @lock: queued spinlock structure + * Return: 1 if it is unlocked, 0 otherwise + * + * N.B. Whenever there are tasks waiting for the lock, it is considered + * locked wrt the lockref code to avoid lock stealing by the lockref + * code and change things underneath the lock. This also allows some + * optimizations to be applied without conflict with lockref. + */ +static __always_inline int queued_spin_value_unlocked(struct qspinlock lock) +{ + return !atomic_read(&lock.val); +} + +/** + * queued_spin_is_contended - check if the lock is contended + * @lock : Pointer to queued spinlock structure + * Return: 1 if lock contended, 0 otherwise + */ +static __always_inline int queued_spin_is_contended(struct qspinlock *lock) +{ + return atomic_read(&lock->val) & ~_Q_LOCKED_MASK; +} +/** + * queued_spin_trylock - try to acquire the queued spinlock + * @lock : Pointer to queued spinlock structure + * Return: 1 if lock acquired, 0 if failed + */ +static __always_inline int queued_spin_trylock(struct qspinlock *lock) +{ + if (!atomic_read(&lock->val) && + (atomic_cmpxchg(&lock->val, 0, _Q_LOCKED_VAL) == 0)) + return 1; + return 0; +} + +extern void queued_spin_lock_slowpath(struct qspinlock *lock, u32 val); + +/** + * queued_spin_lock - acquire a queued spinlock + * @lock: Pointer to queued spinlock structure + */ +static __always_inline void queued_spin_lock(struct qspinlock *lock) +{ + u32 val; + + val = atomic_cmpxchg(&lock->val, 0, _Q_LOCKED_VAL); + if (likely(val == 0)) + return; + queued_spin_lock_slowpath(lock, val); +} + +#ifndef queued_spin_unlock +/** + * queued_spin_unlock - release a queued spinlock + * @lock : Pointer to queued spinlock structure + */ +static __always_inline void queued_spin_unlock(struct qspinlock *lock) +{ + /* + * smp_mb__before_atomic() in order to guarantee release semantics + */ + smp_mb__before_atomic_dec(); + atomic_sub(_Q_LOCKED_VAL, &lock->val); +} +#endif + +/** + * queued_spin_unlock_wait - wait until current lock holder releases the lock + * @lock : Pointer to queued spinlock structure + * + * There is a very slight possibility of live-lock if the lockers keep coming + * and the waiter is just unfortunate enough to not see any unlock state. + */ +static inline void queued_spin_unlock_wait(struct qspinlock *lock) +{ + while (atomic_read(&lock->val) & _Q_LOCKED_MASK) + cpu_relax(); +} + +#ifndef virt_queued_spin_lock +static __always_inline bool virt_queued_spin_lock(struct qspinlock *lock) +{ + return false; +} +#endif + +/* + * Initializier + */ +#define __ARCH_SPIN_LOCK_UNLOCKED { ATOMIC_INIT(0) } + +/* + * Remapping spinlock architecture specific functions to the corresponding + * queued spinlock functions. + */ +#define arch_spin_is_locked(l) queued_spin_is_locked(l) +#define arch_spin_is_contended(l) queued_spin_is_contended(l) +#define arch_spin_value_unlocked(l) queued_spin_value_unlocked(l) +#define arch_spin_lock(l) queued_spin_lock(l) +#define arch_spin_trylock(l) queued_spin_trylock(l) +#define arch_spin_unlock(l) queued_spin_unlock(l) +#define arch_spin_lock_flags(l, f) queued_spin_lock(l) +#define arch_spin_unlock_wait(l) queued_spin_unlock_wait(l) + +#endif /* __ASM_GENERIC_QSPINLOCK_H */ diff --git a/include/asm-generic/qspinlock_types.h b/include/asm-generic/qspinlock_types.h new file mode 100644 index 000000000000..85f888e86761 --- /dev/null +++ b/include/asm-generic/qspinlock_types.h @@ -0,0 +1,79 @@ +/* + * Queued spinlock + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P. + * + * Authors: Waiman Long <waiman.long@hp.com> + */ +#ifndef __ASM_GENERIC_QSPINLOCK_TYPES_H +#define __ASM_GENERIC_QSPINLOCK_TYPES_H + +/* + * Including atomic.h with PARAVIRT on will cause compilation errors because + * of recursive header file incluson via paravirt_types.h. So don't include + * it if PARAVIRT is on. + */ +#ifndef CONFIG_PARAVIRT +#include <linux/types.h> +#include <linux/atomic.h> +#endif + +typedef struct qspinlock { + atomic_t val; +} arch_spinlock_t; + +/* + * Bitfields in the atomic value: + * + * When NR_CPUS < 16K + * 0- 7: locked byte + * 8: pending + * 9-15: not used + * 16-17: tail index + * 18-31: tail cpu (+1) + * + * When NR_CPUS >= 16K + * 0- 7: locked byte + * 8: pending + * 9-10: tail index + * 11-31: tail cpu (+1) + */ +#define _Q_SET_MASK(type) (((1U << _Q_ ## type ## _BITS) - 1)\ + << _Q_ ## type ## _OFFSET) +#define _Q_LOCKED_OFFSET 0 +#define _Q_LOCKED_BITS 8 +#define _Q_LOCKED_MASK _Q_SET_MASK(LOCKED) + +#define _Q_PENDING_OFFSET (_Q_LOCKED_OFFSET + _Q_LOCKED_BITS) +#if CONFIG_NR_CPUS < (1U << 14) +#define _Q_PENDING_BITS 8 +#else +#define _Q_PENDING_BITS 1 +#endif +#define _Q_PENDING_MASK _Q_SET_MASK(PENDING) + +#define _Q_TAIL_IDX_OFFSET (_Q_PENDING_OFFSET + _Q_PENDING_BITS) +#define _Q_TAIL_IDX_BITS 2 +#define _Q_TAIL_IDX_MASK _Q_SET_MASK(TAIL_IDX) + +#define _Q_TAIL_CPU_OFFSET (_Q_TAIL_IDX_OFFSET + _Q_TAIL_IDX_BITS) +#define _Q_TAIL_CPU_BITS (32 - _Q_TAIL_CPU_OFFSET) +#define _Q_TAIL_CPU_MASK _Q_SET_MASK(TAIL_CPU) + +#define _Q_TAIL_OFFSET _Q_TAIL_IDX_OFFSET +#define _Q_TAIL_MASK (_Q_TAIL_IDX_MASK | _Q_TAIL_CPU_MASK) + +#define _Q_LOCKED_VAL (1U << _Q_LOCKED_OFFSET) +#define _Q_PENDING_VAL (1U << _Q_PENDING_OFFSET) + +#endif /* __ASM_GENERIC_QSPINLOCK_TYPES_H */ diff --git a/include/crypto/aead.h b/include/crypto/aead.h index 94b19be67574..7169ad04acc0 100644 --- a/include/crypto/aead.h +++ b/include/crypto/aead.h @@ -18,6 +18,65 @@ #include <linux/slab.h> /** + * DOC: Authenticated Encryption With Associated Data (AEAD) Cipher API + * + * The AEAD cipher API is used with the ciphers of type CRYPTO_ALG_TYPE_AEAD + * (listed as type "aead" in /proc/crypto) + * + * The most prominent examples for this type of encryption is GCM and CCM. + * However, the kernel supports other types of AEAD ciphers which are defined + * with the following cipher string: + * + * authenc(keyed message digest, block cipher) + * + * For example: authenc(hmac(sha256), cbc(aes)) + * + * The example code provided for the asynchronous block cipher operation + * applies here as well. Naturally all *ablkcipher* symbols must be exchanged + * the *aead* pendants discussed in the following. In addition, for the AEAD + * operation, the aead_request_set_assoc function must be used to set the + * pointer to the associated data memory location before performing the + * encryption or decryption operation. In case of an encryption, the associated + * data memory is filled during the encryption operation. For decryption, the + * associated data memory must contain data that is used to verify the integrity + * of the decrypted data. Another deviation from the asynchronous block cipher + * operation is that the caller should explicitly check for -EBADMSG of the + * crypto_aead_decrypt. That error indicates an authentication error, i.e. + * a breach in the integrity of the message. In essence, that -EBADMSG error + * code is the key bonus an AEAD cipher has over "standard" block chaining + * modes. + */ + +/** + * struct aead_request - AEAD request + * @base: Common attributes for async crypto requests + * @old: Boolean whether the old or new AEAD API is used + * @assoclen: Length in bytes of associated data for authentication + * @cryptlen: Length of data to be encrypted or decrypted + * @iv: Initialisation vector + * @assoc: Associated data + * @src: Source data + * @dst: Destination data + * @__ctx: Start of private context data + */ +struct aead_request { + struct crypto_async_request base; + + bool old; + + unsigned int assoclen; + unsigned int cryptlen; + + u8 *iv; + + struct scatterlist *assoc; + struct scatterlist *src; + struct scatterlist *dst; + + void *__ctx[] CRYPTO_MINALIGN_ATTR; +}; + +/** * struct aead_givcrypt_request - AEAD request with IV generation * @seq: Sequence number for IV generation * @giv: Space for generated IV @@ -30,6 +89,474 @@ struct aead_givcrypt_request { struct aead_request areq; }; +/** + * struct aead_alg - AEAD cipher definition + * @maxauthsize: Set the maximum authentication tag size supported by the + * transformation. A transformation may support smaller tag sizes. + * As the authentication tag is a message digest to ensure the + * integrity of the encrypted data, a consumer typically wants the + * largest authentication tag possible as defined by this + * variable. + * @setauthsize: Set authentication size for the AEAD transformation. This + * function is used to specify the consumer requested size of the + * authentication tag to be either generated by the transformation + * during encryption or the size of the authentication tag to be + * supplied during the decryption operation. This function is also + * responsible for checking the authentication tag size for + * validity. + * @setkey: see struct ablkcipher_alg + * @encrypt: see struct ablkcipher_alg + * @decrypt: see struct ablkcipher_alg + * @geniv: see struct ablkcipher_alg + * @ivsize: see struct ablkcipher_alg + * @init: Initialize the cryptographic transformation object. This function + * is used to initialize the cryptographic transformation object. + * This function is called only once at the instantiation time, right + * after the transformation context was allocated. In case the + * cryptographic hardware has some special requirements which need to + * be handled by software, this function shall check for the precise + * requirement of the transformation and put any software fallbacks + * in place. + * @exit: Deinitialize the cryptographic transformation object. This is a + * counterpart to @init, used to remove various changes set in + * @init. + * + * All fields except @ivsize is mandatory and must be filled. + */ +struct aead_alg { + int (*setkey)(struct crypto_aead *tfm, const u8 *key, + unsigned int keylen); + int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize); + int (*encrypt)(struct aead_request *req); + int (*decrypt)(struct aead_request *req); + int (*init)(struct crypto_aead *tfm); + void (*exit)(struct crypto_aead *tfm); + + const char *geniv; + + unsigned int ivsize; + unsigned int maxauthsize; + + struct crypto_alg base; +}; + +struct crypto_aead { + int (*setkey)(struct crypto_aead *tfm, const u8 *key, + unsigned int keylen); + int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize); + int (*encrypt)(struct aead_request *req); + int (*decrypt)(struct aead_request *req); + int (*givencrypt)(struct aead_givcrypt_request *req); + int (*givdecrypt)(struct aead_givcrypt_request *req); + + struct crypto_aead *child; + + unsigned int authsize; + unsigned int reqsize; + + struct crypto_tfm base; +}; + +static inline struct crypto_aead *__crypto_aead_cast(struct crypto_tfm *tfm) +{ + return container_of(tfm, struct crypto_aead, base); +} + +/** + * crypto_alloc_aead() - allocate AEAD cipher handle + * @alg_name: is the cra_name / name or cra_driver_name / driver name of the + * AEAD cipher + * @type: specifies the type of the cipher + * @mask: specifies the mask for the cipher + * + * Allocate a cipher handle for an AEAD. The returned struct + * crypto_aead is the cipher handle that is required for any subsequent + * API invocation for that AEAD. + * + * Return: allocated cipher handle in case of success; IS_ERR() is true in case + * of an error, PTR_ERR() returns the error code. + */ +struct crypto_aead *crypto_alloc_aead(const char *alg_name, u32 type, u32 mask); + +static inline struct crypto_tfm *crypto_aead_tfm(struct crypto_aead *tfm) +{ + return &tfm->base; +} + +/** + * crypto_free_aead() - zeroize and free aead handle + * @tfm: cipher handle to be freed + */ +static inline void crypto_free_aead(struct crypto_aead *tfm) +{ + crypto_destroy_tfm(tfm, crypto_aead_tfm(tfm)); +} + +static inline struct crypto_aead *crypto_aead_crt(struct crypto_aead *tfm) +{ + return tfm; +} + +static inline struct old_aead_alg *crypto_old_aead_alg(struct crypto_aead *tfm) +{ + return &crypto_aead_tfm(tfm)->__crt_alg->cra_aead; +} + +static inline struct aead_alg *crypto_aead_alg(struct crypto_aead *tfm) +{ + return container_of(crypto_aead_tfm(tfm)->__crt_alg, + struct aead_alg, base); +} + +static inline unsigned int crypto_aead_alg_ivsize(struct aead_alg *alg) +{ + return alg->base.cra_aead.encrypt ? alg->base.cra_aead.ivsize : + alg->ivsize; +} + +/** + * crypto_aead_ivsize() - obtain IV size + * @tfm: cipher handle + * + * The size of the IV for the aead referenced by the cipher handle is + * returned. This IV size may be zero if the cipher does not need an IV. + * + * Return: IV size in bytes + */ +static inline unsigned int crypto_aead_ivsize(struct crypto_aead *tfm) +{ + return crypto_aead_alg_ivsize(crypto_aead_alg(tfm)); +} + +/** + * crypto_aead_authsize() - obtain maximum authentication data size + * @tfm: cipher handle + * + * The maximum size of the authentication data for the AEAD cipher referenced + * by the AEAD cipher handle is returned. The authentication data size may be + * zero if the cipher implements a hard-coded maximum. + * + * The authentication data may also be known as "tag value". + * + * Return: authentication data size / tag size in bytes + */ +static inline unsigned int crypto_aead_authsize(struct crypto_aead *tfm) +{ + return tfm->authsize; +} + +/** + * crypto_aead_blocksize() - obtain block size of cipher + * @tfm: cipher handle + * + * The block size for the AEAD referenced with the cipher handle is returned. + * The caller may use that information to allocate appropriate memory for the + * data returned by the encryption or decryption operation + * + * Return: block size of cipher + */ +static inline unsigned int crypto_aead_blocksize(struct crypto_aead *tfm) +{ + return crypto_tfm_alg_blocksize(crypto_aead_tfm(tfm)); +} + +static inline unsigned int crypto_aead_alignmask(struct crypto_aead *tfm) +{ + return crypto_tfm_alg_alignmask(crypto_aead_tfm(tfm)); +} + +static inline u32 crypto_aead_get_flags(struct crypto_aead *tfm) +{ + return crypto_tfm_get_flags(crypto_aead_tfm(tfm)); +} + +static inline void crypto_aead_set_flags(struct crypto_aead *tfm, u32 flags) +{ + crypto_tfm_set_flags(crypto_aead_tfm(tfm), flags); +} + +static inline void crypto_aead_clear_flags(struct crypto_aead *tfm, u32 flags) +{ + crypto_tfm_clear_flags(crypto_aead_tfm(tfm), flags); +} + +/** + * crypto_aead_setkey() - set key for cipher + * @tfm: cipher handle + * @key: buffer holding the key + * @keylen: length of the key in bytes + * + * The caller provided key is set for the AEAD referenced by the cipher + * handle. + * + * Note, the key length determines the cipher type. Many block ciphers implement + * different cipher modes depending on the key size, such as AES-128 vs AES-192 + * vs. AES-256. When providing a 16 byte key for an AES cipher handle, AES-128 + * is performed. + * + * Return: 0 if the setting of the key was successful; < 0 if an error occurred + */ +int crypto_aead_setkey(struct crypto_aead *tfm, + const u8 *key, unsigned int keylen); + +/** + * crypto_aead_setauthsize() - set authentication data size + * @tfm: cipher handle + * @authsize: size of the authentication data / tag in bytes + * + * Set the authentication data size / tag size. AEAD requires an authentication + * tag (or MAC) in addition to the associated data. + * + * Return: 0 if the setting of the key was successful; < 0 if an error occurred + */ +int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize); + +static inline struct crypto_aead *crypto_aead_reqtfm(struct aead_request *req) +{ + return __crypto_aead_cast(req->base.tfm); +} + +/** + * crypto_aead_encrypt() - encrypt plaintext + * @req: reference to the aead_request handle that holds all information + * needed to perform the cipher operation + * + * Encrypt plaintext data using the aead_request handle. That data structure + * and how it is filled with data is discussed with the aead_request_* + * functions. + * + * IMPORTANT NOTE The encryption operation creates the authentication data / + * tag. That data is concatenated with the created ciphertext. + * The ciphertext memory size is therefore the given number of + * block cipher blocks + the size defined by the + * crypto_aead_setauthsize invocation. The caller must ensure + * that sufficient memory is available for the ciphertext and + * the authentication tag. + * + * Return: 0 if the cipher operation was successful; < 0 if an error occurred + */ +static inline int crypto_aead_encrypt(struct aead_request *req) +{ + return crypto_aead_reqtfm(req)->encrypt(req); +} + +/** + * crypto_aead_decrypt() - decrypt ciphertext + * @req: reference to the ablkcipher_request handle that holds all information + * needed to perform the cipher operation + * + * Decrypt ciphertext data using the aead_request handle. That data structure + * and how it is filled with data is discussed with the aead_request_* + * functions. + * + * IMPORTANT NOTE The caller must concatenate the ciphertext followed by the + * authentication data / tag. That authentication data / tag + * must have the size defined by the crypto_aead_setauthsize + * invocation. + * + * + * Return: 0 if the cipher operation was successful; -EBADMSG: The AEAD + * cipher operation performs the authentication of the data during the + * decryption operation. Therefore, the function returns this error if + * the authentication of the ciphertext was unsuccessful (i.e. the + * integrity of the ciphertext or the associated data was violated); + * < 0 if an error occurred. + */ +static inline int crypto_aead_decrypt(struct aead_request *req) +{ + if (req->cryptlen < crypto_aead_authsize(crypto_aead_reqtfm(req))) + return -EINVAL; + + return crypto_aead_reqtfm(req)->decrypt(req); +} + +/** + * DOC: Asynchronous AEAD Request Handle + * + * The aead_request data structure contains all pointers to data required for + * the AEAD cipher operation. This includes the cipher handle (which can be + * used by multiple aead_request instances), pointer to plaintext and + * ciphertext, asynchronous callback function, etc. It acts as a handle to the + * aead_request_* API calls in a similar way as AEAD handle to the + * crypto_aead_* API calls. + */ + +/** + * crypto_aead_reqsize() - obtain size of the request data structure + * @tfm: cipher handle + * + * Return: number of bytes + */ +unsigned int crypto_aead_reqsize(struct crypto_aead *tfm); + +/** + * aead_request_set_tfm() - update cipher handle reference in request + * @req: request handle to be modified + * @tfm: cipher handle that shall be added to the request handle + * + * Allow the caller to replace the existing aead handle in the request + * data structure with a different one. + */ +static inline void aead_request_set_tfm(struct aead_request *req, + struct crypto_aead *tfm) +{ + req->base.tfm = crypto_aead_tfm(tfm->child); +} + +/** + * aead_request_alloc() - allocate request data structure + * @tfm: cipher handle to be registered with the request + * @gfp: memory allocation flag that is handed to kmalloc by the API call. + * + * Allocate the request data structure that must be used with the AEAD + * encrypt and decrypt API calls. During the allocation, the provided aead + * handle is registered in the request data structure. + * + * Return: allocated request handle in case of success; IS_ERR() is true in case + * of an error, PTR_ERR() returns the error code. + */ +static inline struct aead_request *aead_request_alloc(struct crypto_aead *tfm, + gfp_t gfp) +{ + struct aead_request *req; + + req = kmalloc(sizeof(*req) + crypto_aead_reqsize(tfm), gfp); + + if (likely(req)) + aead_request_set_tfm(req, tfm); + + return req; +} + +/** + * aead_request_free() - zeroize and free request data structure + * @req: request data structure cipher handle to be freed + */ +static inline void aead_request_free(struct aead_request *req) +{ + kzfree(req); +} + +/** + * aead_request_set_callback() - set asynchronous callback function + * @req: request handle + * @flags: specify zero or an ORing of the flags + * CRYPTO_TFM_REQ_MAY_BACKLOG the request queue may back log and + * increase the wait queue beyond the initial maximum size; + * CRYPTO_TFM_REQ_MAY_SLEEP the request processing may sleep + * @compl: callback function pointer to be registered with the request handle + * @data: The data pointer refers to memory that is not used by the kernel + * crypto API, but provided to the callback function for it to use. Here, + * the caller can provide a reference to memory the callback function can + * operate on. As the callback function is invoked asynchronously to the + * related functionality, it may need to access data structures of the + * related functionality which can be referenced using this pointer. The + * callback function can access the memory via the "data" field in the + * crypto_async_request data structure provided to the callback function. + * + * Setting the callback function that is triggered once the cipher operation + * completes + * + * The callback function is registered with the aead_request handle and + * must comply with the following template + * + * void callback_function(struct crypto_async_request *req, int error) + */ +static inline void aead_request_set_callback(struct aead_request *req, + u32 flags, + crypto_completion_t compl, + void *data) +{ + req->base.complete = compl; + req->base.data = data; + req->base.flags = flags; +} + +/** + * aead_request_set_crypt - set data buffers + * @req: request handle + * @src: source scatter / gather list + * @dst: destination scatter / gather list + * @cryptlen: number of bytes to process from @src + * @iv: IV for the cipher operation which must comply with the IV size defined + * by crypto_aead_ivsize() + * + * Setting the source data and destination data scatter / gather lists which + * hold the associated data concatenated with the plaintext or ciphertext. See + * below for the authentication tag. + * + * For encryption, the source is treated as the plaintext and the + * destination is the ciphertext. For a decryption operation, the use is + * reversed - the source is the ciphertext and the destination is the plaintext. + * + * For both src/dst the layout is associated data, plain/cipher text, + * authentication tag. + * + * The content of the AD in the destination buffer after processing + * will either be untouched, or it will contain a copy of the AD + * from the source buffer. In order to ensure that it always has + * a copy of the AD, the user must copy the AD over either before + * or after processing. Of course this is not relevant if the user + * is doing in-place processing where src == dst. + * + * IMPORTANT NOTE AEAD requires an authentication tag (MAC). For decryption, + * the caller must concatenate the ciphertext followed by the + * authentication tag and provide the entire data stream to the + * decryption operation (i.e. the data length used for the + * initialization of the scatterlist and the data length for the + * decryption operation is identical). For encryption, however, + * the authentication tag is created while encrypting the data. + * The destination buffer must hold sufficient space for the + * ciphertext and the authentication tag while the encryption + * invocation must only point to the plaintext data size. The + * following code snippet illustrates the memory usage + * buffer = kmalloc(ptbuflen + (enc ? authsize : 0)); + * sg_init_one(&sg, buffer, ptbuflen + (enc ? authsize : 0)); + * aead_request_set_crypt(req, &sg, &sg, ptbuflen, iv); + */ +static inline void aead_request_set_crypt(struct aead_request *req, + struct scatterlist *src, + struct scatterlist *dst, + unsigned int cryptlen, u8 *iv) +{ + req->src = src; + req->dst = dst; + req->cryptlen = cryptlen; + req->iv = iv; +} + +/** + * aead_request_set_assoc() - set the associated data scatter / gather list + * @req: request handle + * @assoc: associated data scatter / gather list + * @assoclen: number of bytes to process from @assoc + * + * Obsolete, do not use. + */ +static inline void aead_request_set_assoc(struct aead_request *req, + struct scatterlist *assoc, + unsigned int assoclen) +{ + req->assoc = assoc; + req->assoclen = assoclen; + req->old = true; +} + +/** + * aead_request_set_ad - set associated data information + * @req: request handle + * @assoclen: number of bytes in associated data + * + * Setting the AD information. This function sets the length of + * the associated data. + */ +static inline void aead_request_set_ad(struct aead_request *req, + unsigned int assoclen) +{ + req->assoclen = assoclen; + req->old = false; +} + static inline struct crypto_aead *aead_givcrypt_reqtfm( struct aead_givcrypt_request *req) { @@ -38,14 +565,12 @@ static inline struct crypto_aead *aead_givcrypt_reqtfm( static inline int crypto_aead_givencrypt(struct aead_givcrypt_request *req) { - struct aead_tfm *crt = crypto_aead_crt(aead_givcrypt_reqtfm(req)); - return crt->givencrypt(req); + return aead_givcrypt_reqtfm(req)->givencrypt(req); }; static inline int crypto_aead_givdecrypt(struct aead_givcrypt_request *req) { - struct aead_tfm *crt = crypto_aead_crt(aead_givcrypt_reqtfm(req)); - return crt->givdecrypt(req); + return aead_givcrypt_reqtfm(req)->givdecrypt(req); }; static inline void aead_givcrypt_set_tfm(struct aead_givcrypt_request *req, diff --git a/include/crypto/akcipher.h b/include/crypto/akcipher.h new file mode 100644 index 000000000000..69d163e39101 --- /dev/null +++ b/include/crypto/akcipher.h @@ -0,0 +1,340 @@ +/* + * Public Key Encryption + * + * Copyright (c) 2015, Intel Corporation + * Authors: Tadeusz Struk <tadeusz.struk@intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ +#ifndef _CRYPTO_AKCIPHER_H +#define _CRYPTO_AKCIPHER_H +#include <linux/crypto.h> + +/** + * struct akcipher_request - public key request + * + * @base: Common attributes for async crypto requests + * @src: Pointer to memory containing the input parameters + * The format of the parameter(s) is expeted to be Octet String + * @dst: Pointer to memory whare the result will be stored + * @src_len: Size of the input parameter + * @dst_len: Size of the output buffer. It needs to be at leaset + * as big as the expected result depending on the operation + * After operation it will be updated with the acctual size of the + * result. In case of error, where the dst_len was insufficient, + * it will be updated to the size required for the operation. + * @__ctx: Start of private context data + */ +struct akcipher_request { + struct crypto_async_request base; + void *src; + void *dst; + unsigned int src_len; + unsigned int dst_len; + void *__ctx[] CRYPTO_MINALIGN_ATTR; +}; + +/** + * struct crypto_akcipher - user-instantiated objects which encapsulate + * algorithms and core processing logic + * + * @base: Common crypto API algorithm data structure + */ +struct crypto_akcipher { + struct crypto_tfm base; +}; + +/** + * struct akcipher_alg - generic public key algorithm + * + * @sign: Function performs a sign operation as defined by public key + * algorithm. In case of error, where the dst_len was insufficient, + * the req->dst_len will be updated to the size required for the + * operation + * @verify: Function performs a sign operation as defined by public key + * algorithm. In case of error, where the dst_len was insufficient, + * the req->dst_len will be updated to the size required for the + * operation + * @encrypt: Function performs an encrytp operation as defined by public key + * algorithm. In case of error, where the dst_len was insufficient, + * the req->dst_len will be updated to the size required for the + * operation + * @decrypt: Function performs a decrypt operation as defined by public key + * algorithm. In case of error, where the dst_len was insufficient, + * the req->dst_len will be updated to the size required for the + * operation + * @setkey: Function invokes the algorithm specific set key function, which + * knows how to decode and interpret the BER encoded key + * @init: Initialize the cryptographic transformation object. + * This function is used to initialize the cryptographic + * transformation object. This function is called only once at + * the instantiation time, right after the transformation context + * was allocated. In case the cryptographic hardware has some + * special requirements which need to be handled by software, this + * function shall check for the precise requirement of the + * transformation and put any software fallbacks in place. + * @exit: Deinitialize the cryptographic transformation object. This is a + * counterpart to @init, used to remove various changes set in + * @init. + * + * @reqsize: Request context size required by algorithm implementation + * @base: Common crypto API algorithm data structure + */ +struct akcipher_alg { + int (*sign)(struct akcipher_request *req); + int (*verify)(struct akcipher_request *req); + int (*encrypt)(struct akcipher_request *req); + int (*decrypt)(struct akcipher_request *req); + int (*setkey)(struct crypto_akcipher *tfm, const void *key, + unsigned int keylen); + int (*init)(struct crypto_akcipher *tfm); + void (*exit)(struct crypto_akcipher *tfm); + + unsigned int reqsize; + struct crypto_alg base; +}; + +/** + * DOC: Generic Public Key API + * + * The Public Key API is used with the algorithms of type + * CRYPTO_ALG_TYPE_AKCIPHER (listed as type "akcipher" in /proc/crypto) + */ + +/** + * crypto_alloc_akcipher() -- allocate AKCIPHER tfm handle + * @alg_name: is the cra_name / name or cra_driver_name / driver name of the + * public key algorithm e.g. "rsa" + * @type: specifies the type of the algorithm + * @mask: specifies the mask for the algorithm + * + * Allocate a handle for public key algorithm. The returned struct + * crypto_akcipher is the handle that is required for any subsequent + * API invocation for the public key operations. + * + * Return: allocated handle in case of success; IS_ERR() is true in case + * of an error, PTR_ERR() returns the error code. + */ +struct crypto_akcipher *crypto_alloc_akcipher(const char *alg_name, u32 type, + u32 mask); + +static inline struct crypto_tfm *crypto_akcipher_tfm( + struct crypto_akcipher *tfm) +{ + return &tfm->base; +} + +static inline struct akcipher_alg *__crypto_akcipher_alg(struct crypto_alg *alg) +{ + return container_of(alg, struct akcipher_alg, base); +} + +static inline struct crypto_akcipher *__crypto_akcipher_tfm( + struct crypto_tfm *tfm) +{ + return container_of(tfm, struct crypto_akcipher, base); +} + +static inline struct akcipher_alg *crypto_akcipher_alg( + struct crypto_akcipher *tfm) +{ + return __crypto_akcipher_alg(crypto_akcipher_tfm(tfm)->__crt_alg); +} + +static inline unsigned int crypto_akcipher_reqsize(struct crypto_akcipher *tfm) +{ + return crypto_akcipher_alg(tfm)->reqsize; +} + +static inline void akcipher_request_set_tfm(struct akcipher_request *req, + struct crypto_akcipher *tfm) +{ + req->base.tfm = crypto_akcipher_tfm(tfm); +} + +static inline struct crypto_akcipher *crypto_akcipher_reqtfm( + struct akcipher_request *req) +{ + return __crypto_akcipher_tfm(req->base.tfm); +} + +/** + * crypto_free_akcipher() -- free AKCIPHER tfm handle + * + * @tfm: AKCIPHER tfm handle allocated with crypto_alloc_akcipher() + */ +static inline void crypto_free_akcipher(struct crypto_akcipher *tfm) +{ + crypto_destroy_tfm(tfm, crypto_akcipher_tfm(tfm)); +} + +/** + * akcipher_request_alloc() -- allocates public key request + * + * @tfm: AKCIPHER tfm handle allocated with crypto_alloc_akcipher() + * @gfp: allocation flags + * + * Return: allocated handle in case of success or NULL in case of an error. + */ +static inline struct akcipher_request *akcipher_request_alloc( + struct crypto_akcipher *tfm, gfp_t gfp) +{ + struct akcipher_request *req; + + req = kmalloc(sizeof(*req) + crypto_akcipher_reqsize(tfm), gfp); + if (likely(req)) + akcipher_request_set_tfm(req, tfm); + + return req; +} + +/** + * akcipher_request_free() -- zeroize and free public key request + * + * @req: request to free + */ +static inline void akcipher_request_free(struct akcipher_request *req) +{ + kzfree(req); +} + +/** + * akcipher_request_set_callback() -- Sets an asynchronous callback. + * + * Callback will be called when an asynchronous operation on a given + * request is finished. + * + * @req: request that the callback will be set for + * @flgs: specify for instance if the operation may backlog + * @cmlp: callback which will be called + * @data: private data used by the caller + */ +static inline void akcipher_request_set_callback(struct akcipher_request *req, + u32 flgs, + crypto_completion_t cmpl, + void *data) +{ + req->base.complete = cmpl; + req->base.data = data; + req->base.flags = flgs; +} + +/** + * akcipher_request_set_crypt() -- Sets reqest parameters + * + * Sets parameters required by crypto operation + * + * @req: public key request + * @src: ptr to input parameter + * @dst: ptr of output parameter + * @src_len: size of the input buffer + * @dst_len: size of the output buffer. It will be updated by the + * implementation to reflect the acctual size of the result + */ +static inline void akcipher_request_set_crypt(struct akcipher_request *req, + void *src, void *dst, + unsigned int src_len, + unsigned int dst_len) +{ + req->src = src; + req->dst = dst; + req->src_len = src_len; + req->dst_len = dst_len; +} + +/** + * crypto_akcipher_encrypt() -- Invoke public key encrypt operation + * + * Function invokes the specific public key encrypt operation for a given + * public key algorithm + * + * @req: asymmetric key request + * + * Return: zero on success; error code in case of error + */ +static inline int crypto_akcipher_encrypt(struct akcipher_request *req) +{ + struct crypto_akcipher *tfm = crypto_akcipher_reqtfm(req); + struct akcipher_alg *alg = crypto_akcipher_alg(tfm); + + return alg->encrypt(req); +} + +/** + * crypto_akcipher_decrypt() -- Invoke public key decrypt operation + * + * Function invokes the specific public key decrypt operation for a given + * public key algorithm + * + * @req: asymmetric key request + * + * Return: zero on success; error code in case of error + */ +static inline int crypto_akcipher_decrypt(struct akcipher_request *req) +{ + struct crypto_akcipher *tfm = crypto_akcipher_reqtfm(req); + struct akcipher_alg *alg = crypto_akcipher_alg(tfm); + + return alg->decrypt(req); +} + +/** + * crypto_akcipher_sign() -- Invoke public key sign operation + * + * Function invokes the specific public key sign operation for a given + * public key algorithm + * + * @req: asymmetric key request + * + * Return: zero on success; error code in case of error + */ +static inline int crypto_akcipher_sign(struct akcipher_request *req) +{ + struct crypto_akcipher *tfm = crypto_akcipher_reqtfm(req); + struct akcipher_alg *alg = crypto_akcipher_alg(tfm); + + return alg->sign(req); +} + +/** + * crypto_akcipher_verify() -- Invoke public key verify operation + * + * Function invokes the specific public key verify operation for a given + * public key algorithm + * + * @req: asymmetric key request + * + * Return: zero on success; error code in case of error + */ +static inline int crypto_akcipher_verify(struct akcipher_request *req) +{ + struct crypto_akcipher *tfm = crypto_akcipher_reqtfm(req); + struct akcipher_alg *alg = crypto_akcipher_alg(tfm); + + return alg->verify(req); +} + +/** + * crypto_akcipher_setkey() -- Invoke public key setkey operation + * + * Function invokes the algorithm specific set key function, which knows + * how to decode and interpret the encoded key + * + * @tfm: tfm handle + * @key: BER encoded private or public key + * @keylen: length of the key + * + * Return: zero on success; error code in case of error + */ +static inline int crypto_akcipher_setkey(struct crypto_akcipher *tfm, void *key, + unsigned int keylen) +{ + struct akcipher_alg *alg = crypto_akcipher_alg(tfm); + + return alg->setkey(tfm, key, keylen); +} +#endif diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index 0ecb7688af71..d4ebf6e9af6a 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -17,6 +17,7 @@ #include <linux/kernel.h> #include <linux/skbuff.h> +struct crypto_aead; struct module; struct rtattr; struct seq_file; @@ -126,7 +127,6 @@ struct ablkcipher_walk { }; extern const struct crypto_type crypto_ablkcipher_type; -extern const struct crypto_type crypto_aead_type; extern const struct crypto_type crypto_blkcipher_type; void crypto_mod_put(struct crypto_alg *alg); @@ -144,6 +144,8 @@ int crypto_init_spawn(struct crypto_spawn *spawn, struct crypto_alg *alg, int crypto_init_spawn2(struct crypto_spawn *spawn, struct crypto_alg *alg, struct crypto_instance *inst, const struct crypto_type *frontend); +int crypto_grab_spawn(struct crypto_spawn *spawn, const char *name, + u32 type, u32 mask); void crypto_drop_spawn(struct crypto_spawn *spawn); struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type, @@ -239,22 +241,6 @@ static inline void *crypto_ablkcipher_ctx_aligned(struct crypto_ablkcipher *tfm) return crypto_tfm_ctx_aligned(&tfm->base); } -static inline struct aead_alg *crypto_aead_alg(struct crypto_aead *tfm) -{ - return &crypto_aead_tfm(tfm)->__crt_alg->cra_aead; -} - -static inline void *crypto_aead_ctx(struct crypto_aead *tfm) -{ - return crypto_tfm_ctx(&tfm->base); -} - -static inline struct crypto_instance *crypto_aead_alg_instance( - struct crypto_aead *aead) -{ - return crypto_tfm_alg_instance(&aead->base); -} - static inline struct crypto_blkcipher *crypto_spawn_blkcipher( struct crypto_spawn *spawn) { @@ -363,21 +349,6 @@ static inline int ablkcipher_tfm_in_queue(struct crypto_queue *queue, return crypto_tfm_in_queue(queue, crypto_ablkcipher_tfm(tfm)); } -static inline void *aead_request_ctx(struct aead_request *req) -{ - return req->__ctx; -} - -static inline void aead_request_complete(struct aead_request *req, int err) -{ - req->base.complete(&req->base, err); -} - -static inline u32 aead_request_flags(struct aead_request *req) -{ - return req->base.flags; -} - static inline struct crypto_alg *crypto_get_attr_alg(struct rtattr **tb, u32 type, u32 mask) { diff --git a/include/crypto/compress.h b/include/crypto/compress.h index 86163ef24219..5b67af834d83 100644 --- a/include/crypto/compress.h +++ b/include/crypto/compress.h @@ -55,14 +55,14 @@ struct crypto_pcomp { }; struct pcomp_alg { - int (*compress_setup)(struct crypto_pcomp *tfm, void *params, + int (*compress_setup)(struct crypto_pcomp *tfm, const void *params, unsigned int len); int (*compress_init)(struct crypto_pcomp *tfm); int (*compress_update)(struct crypto_pcomp *tfm, struct comp_request *req); int (*compress_final)(struct crypto_pcomp *tfm, struct comp_request *req); - int (*decompress_setup)(struct crypto_pcomp *tfm, void *params, + int (*decompress_setup)(struct crypto_pcomp *tfm, const void *params, unsigned int len); int (*decompress_init)(struct crypto_pcomp *tfm); int (*decompress_update)(struct crypto_pcomp *tfm, @@ -97,7 +97,7 @@ static inline struct pcomp_alg *crypto_pcomp_alg(struct crypto_pcomp *tfm) } static inline int crypto_compress_setup(struct crypto_pcomp *tfm, - void *params, unsigned int len) + const void *params, unsigned int len) { return crypto_pcomp_alg(tfm)->compress_setup(tfm, params, len); } @@ -120,7 +120,7 @@ static inline int crypto_compress_final(struct crypto_pcomp *tfm, } static inline int crypto_decompress_setup(struct crypto_pcomp *tfm, - void *params, unsigned int len) + const void *params, unsigned int len) { return crypto_pcomp_alg(tfm)->decompress_setup(tfm, params, len); } diff --git a/include/crypto/cryptd.h b/include/crypto/cryptd.h index ba98918bbd9b..1547f540c920 100644 --- a/include/crypto/cryptd.h +++ b/include/crypto/cryptd.h @@ -14,6 +14,7 @@ #include <linux/crypto.h> #include <linux/kernel.h> +#include <crypto/aead.h> #include <crypto/hash.h> struct cryptd_ablkcipher { diff --git a/include/crypto/drbg.h b/include/crypto/drbg.h index 5186f750c713..9756c70899d8 100644 --- a/include/crypto/drbg.h +++ b/include/crypto/drbg.h @@ -49,8 +49,9 @@ #include <crypto/internal/rng.h> #include <crypto/rng.h> #include <linux/fips.h> -#include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/list.h> +#include <linux/workqueue.h> /* * Concatenation Helper and string operation helper @@ -104,12 +105,13 @@ struct drbg_test_data { }; struct drbg_state { - spinlock_t drbg_lock; /* lock around DRBG */ + struct mutex drbg_mutex; /* lock around DRBG */ unsigned char *V; /* internal state 10.1.1.1 1a) */ /* hash: static value 10.1.1.1 1b) hmac / ctr: key */ unsigned char *C; /* Number of RNG requests since last reseed -- 10.1.1.1 1c) */ size_t reseed_ctr; + size_t reseed_threshold; /* some memory the DRBG can use for its operation */ unsigned char *scratchpad; void *priv_data; /* Cipher handle */ @@ -119,9 +121,12 @@ struct drbg_state { bool fips_primed; /* Continuous test primed? */ unsigned char *prev; /* FIPS 140-2 continuous test value */ #endif + struct work_struct seed_work; /* asynchronous seeding support */ + struct crypto_rng *jent; const struct drbg_state_ops *d_ops; const struct drbg_core *core; - struct drbg_test_data *test_data; + struct drbg_string test_data; + struct random_ready_callback random_ready; }; static inline __u8 drbg_statelen(struct drbg_state *drbg) @@ -177,19 +182,8 @@ static inline size_t drbg_max_requests(struct drbg_state *drbg) } /* - * kernel crypto API input data structure for DRBG generate in case dlen - * is set to 0 - */ -struct drbg_gen { - unsigned char *outbuf; /* output buffer for random numbers */ - unsigned int outlen; /* size of output buffer */ - struct drbg_string *addtl; /* additional information string */ - struct drbg_test_data *test_data; /* test data */ -}; - -/* * This is a wrapper to the kernel crypto API function of - * crypto_rng_get_bytes() to allow the caller to provide additional data. + * crypto_rng_generate() to allow the caller to provide additional data. * * @drng DRBG handle -- see crypto_rng_get_bytes * @outbuf output buffer -- see crypto_rng_get_bytes @@ -204,21 +198,15 @@ static inline int crypto_drbg_get_bytes_addtl(struct crypto_rng *drng, unsigned char *outbuf, unsigned int outlen, struct drbg_string *addtl) { - int ret; - struct drbg_gen genbuf; - genbuf.outbuf = outbuf; - genbuf.outlen = outlen; - genbuf.addtl = addtl; - genbuf.test_data = NULL; - ret = crypto_rng_get_bytes(drng, (u8 *)&genbuf, 0); - return ret; + return crypto_rng_generate(drng, addtl->buf, addtl->len, + outbuf, outlen); } /* * TEST code * * This is a wrapper to the kernel crypto API function of - * crypto_rng_get_bytes() to allow the caller to provide additional data and + * crypto_rng_generate() to allow the caller to provide additional data and * allow furnishing of test_data * * @drng DRBG handle -- see crypto_rng_get_bytes @@ -236,14 +224,10 @@ static inline int crypto_drbg_get_bytes_addtl_test(struct crypto_rng *drng, struct drbg_string *addtl, struct drbg_test_data *test_data) { - int ret; - struct drbg_gen genbuf; - genbuf.outbuf = outbuf; - genbuf.outlen = outlen; - genbuf.addtl = addtl; - genbuf.test_data = test_data; - ret = crypto_rng_get_bytes(drng, (u8 *)&genbuf, 0); - return ret; + crypto_rng_set_entropy(drng, test_data->testentropy->buf, + test_data->testentropy->len); + return crypto_rng_generate(drng, addtl->buf, addtl->len, + outbuf, outlen); } /* @@ -264,14 +248,9 @@ static inline int crypto_drbg_reset_test(struct crypto_rng *drng, struct drbg_string *pers, struct drbg_test_data *test_data) { - int ret; - struct drbg_gen genbuf; - genbuf.outbuf = NULL; - genbuf.outlen = 0; - genbuf.addtl = pers; - genbuf.test_data = test_data; - ret = crypto_rng_reset(drng, (u8 *)&genbuf, 0); - return ret; + crypto_rng_set_entropy(drng, test_data->testentropy->buf, + test_data->testentropy->len); + return crypto_rng_reset(drng, pers->buf, pers->len); } /* DRBG type flags */ diff --git a/include/crypto/hash.h b/include/crypto/hash.h index 98abda9ed3aa..57c8a6ee33c2 100644 --- a/include/crypto/hash.h +++ b/include/crypto/hash.h @@ -66,7 +66,7 @@ struct ahash_request { /** * struct ahash_alg - asynchronous message digest definition * @init: Initialize the transformation context. Intended only to initialize the - * state of the HASH transformation at the begining. This shall fill in + * state of the HASH transformation at the beginning. This shall fill in * the internal structures used during the entire duration of the whole * transformation. No data processing happens at this point. * @update: Push a chunk of data into the driver for transformation. This diff --git a/include/crypto/internal/aead.h b/include/crypto/internal/aead.h index 2eba340230a7..4b2547186519 100644 --- a/include/crypto/internal/aead.h +++ b/include/crypto/internal/aead.h @@ -15,16 +15,75 @@ #include <crypto/aead.h> #include <crypto/algapi.h> +#include <linux/stddef.h> #include <linux/types.h> struct rtattr; +struct aead_instance { + union { + struct { + char head[offsetof(struct aead_alg, base)]; + struct crypto_instance base; + } s; + struct aead_alg alg; + }; +}; + struct crypto_aead_spawn { struct crypto_spawn base; }; +extern const struct crypto_type crypto_aead_type; extern const struct crypto_type crypto_nivaead_type; +static inline void *crypto_aead_ctx(struct crypto_aead *tfm) +{ + return crypto_tfm_ctx(&tfm->base); +} + +static inline struct crypto_instance *crypto_aead_alg_instance( + struct crypto_aead *aead) +{ + return crypto_tfm_alg_instance(&aead->base); +} + +static inline struct crypto_instance *aead_crypto_instance( + struct aead_instance *inst) +{ + return container_of(&inst->alg.base, struct crypto_instance, alg); +} + +static inline struct aead_instance *aead_instance(struct crypto_instance *inst) +{ + return container_of(&inst->alg, struct aead_instance, alg.base); +} + +static inline struct aead_instance *aead_alg_instance(struct crypto_aead *aead) +{ + return aead_instance(crypto_aead_alg_instance(aead)); +} + +static inline void *aead_instance_ctx(struct aead_instance *inst) +{ + return crypto_instance_ctx(aead_crypto_instance(inst)); +} + +static inline void *aead_request_ctx(struct aead_request *req) +{ + return req->__ctx; +} + +static inline void aead_request_complete(struct aead_request *req, int err) +{ + req->base.complete(&req->base, err); +} + +static inline u32 aead_request_flags(struct aead_request *req) +{ + return req->base.flags; +} + static inline void crypto_set_aead_spawn( struct crypto_aead_spawn *spawn, struct crypto_instance *inst) { @@ -47,24 +106,27 @@ static inline struct crypto_alg *crypto_aead_spawn_alg( return spawn->base.alg; } +static inline struct aead_alg *crypto_spawn_aead_alg( + struct crypto_aead_spawn *spawn) +{ + return container_of(spawn->base.alg, struct aead_alg, base); +} + static inline struct crypto_aead *crypto_spawn_aead( struct crypto_aead_spawn *spawn) { - return __crypto_aead_cast( - crypto_spawn_tfm(&spawn->base, CRYPTO_ALG_TYPE_AEAD, - CRYPTO_ALG_TYPE_MASK)); + return crypto_spawn_tfm2(&spawn->base); } -struct crypto_instance *aead_geniv_alloc(struct crypto_template *tmpl, - struct rtattr **tb, u32 type, - u32 mask); -void aead_geniv_free(struct crypto_instance *inst); +struct aead_instance *aead_geniv_alloc(struct crypto_template *tmpl, + struct rtattr **tb, u32 type, u32 mask); +void aead_geniv_free(struct aead_instance *inst); int aead_geniv_init(struct crypto_tfm *tfm); void aead_geniv_exit(struct crypto_tfm *tfm); static inline struct crypto_aead *aead_geniv_base(struct crypto_aead *geniv) { - return crypto_aead_crt(geniv)->base; + return geniv->child; } static inline void *aead_givcrypt_reqctx(struct aead_givcrypt_request *req) @@ -78,5 +140,29 @@ static inline void aead_givcrypt_complete(struct aead_givcrypt_request *req, aead_request_complete(&req->areq, err); } +static inline void crypto_aead_set_reqsize(struct crypto_aead *aead, + unsigned int reqsize) +{ + crypto_aead_crt(aead)->reqsize = reqsize; +} + +static inline unsigned int crypto_aead_alg_maxauthsize(struct aead_alg *alg) +{ + return alg->base.cra_aead.encrypt ? alg->base.cra_aead.maxauthsize : + alg->maxauthsize; +} + +static inline unsigned int crypto_aead_maxauthsize(struct crypto_aead *aead) +{ + return crypto_aead_alg_maxauthsize(crypto_aead_alg(aead)); +} + +int crypto_register_aead(struct aead_alg *alg); +void crypto_unregister_aead(struct aead_alg *alg); +int crypto_register_aeads(struct aead_alg *algs, int count); +void crypto_unregister_aeads(struct aead_alg *algs, int count); +int aead_register_instance(struct crypto_template *tmpl, + struct aead_instance *inst); + #endif /* _CRYPTO_INTERNAL_AEAD_H */ diff --git a/include/crypto/internal/akcipher.h b/include/crypto/internal/akcipher.h new file mode 100644 index 000000000000..9a2bda15e454 --- /dev/null +++ b/include/crypto/internal/akcipher.h @@ -0,0 +1,60 @@ +/* + * Public Key Encryption + * + * Copyright (c) 2015, Intel Corporation + * Authors: Tadeusz Struk <tadeusz.struk@intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ +#ifndef _CRYPTO_AKCIPHER_INT_H +#define _CRYPTO_AKCIPHER_INT_H +#include <crypto/akcipher.h> + +/* + * Transform internal helpers. + */ +static inline void *akcipher_request_ctx(struct akcipher_request *req) +{ + return req->__ctx; +} + +static inline void *akcipher_tfm_ctx(struct crypto_akcipher *tfm) +{ + return tfm->base.__crt_ctx; +} + +static inline void akcipher_request_complete(struct akcipher_request *req, + int err) +{ + req->base.complete(&req->base, err); +} + +static inline const char *akcipher_alg_name(struct crypto_akcipher *tfm) +{ + return crypto_akcipher_tfm(tfm)->__crt_alg->cra_name; +} + +/** + * crypto_register_akcipher() -- Register public key algorithm + * + * Function registers an implementation of a public key verify algorithm + * + * @alg: algorithm definition + * + * Return: zero on success; error code in case of error + */ +int crypto_register_akcipher(struct akcipher_alg *alg); + +/** + * crypto_unregister_akcipher() -- Unregister public key algorithm + * + * Function unregisters an implementation of a public key verify algorithm + * + * @alg: algorithm definition + */ +void crypto_unregister_akcipher(struct akcipher_alg *alg); +#endif diff --git a/include/crypto/internal/geniv.h b/include/crypto/internal/geniv.h new file mode 100644 index 000000000000..9ca9b871aba5 --- /dev/null +++ b/include/crypto/internal/geniv.h @@ -0,0 +1,24 @@ +/* + * geniv: IV generation + * + * Copyright (c) 2015 Herbert Xu <herbert@gondor.apana.org.au> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#ifndef _CRYPTO_INTERNAL_GENIV_H +#define _CRYPTO_INTERNAL_GENIV_H + +#include <crypto/internal/aead.h> +#include <linux/spinlock.h> + +struct aead_geniv_ctx { + spinlock_t lock; + struct crypto_aead *child; +}; + +#endif /* _CRYPTO_INTERNAL_GENIV_H */ diff --git a/include/crypto/internal/rng.h b/include/crypto/internal/rng.h index 896973369573..a52ef3483dd7 100644 --- a/include/crypto/internal/rng.h +++ b/include/crypto/internal/rng.h @@ -2,6 +2,7 @@ * RNG: Random Number Generator algorithms under the crypto API * * Copyright (c) 2008 Neil Horman <nhorman@tuxdriver.com> + * Copyright (c) 2015 Herbert Xu <herbert@gondor.apana.org.au> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -16,11 +17,29 @@ #include <crypto/algapi.h> #include <crypto/rng.h> -extern const struct crypto_type crypto_rng_type; +int crypto_register_rng(struct rng_alg *alg); +void crypto_unregister_rng(struct rng_alg *alg); +int crypto_register_rngs(struct rng_alg *algs, int count); +void crypto_unregister_rngs(struct rng_alg *algs, int count); + +#if defined(CONFIG_CRYPTO_RNG) || defined(CONFIG_CRYPTO_RNG_MODULE) +int crypto_del_default_rng(void); +#else +static inline int crypto_del_default_rng(void) +{ + return 0; +} +#endif static inline void *crypto_rng_ctx(struct crypto_rng *tfm) { return crypto_tfm_ctx(&tfm->base); } +static inline void crypto_rng_set_entropy(struct crypto_rng *tfm, + const u8 *data, unsigned int len) +{ + crypto_rng_alg(tfm)->set_ent(tfm, data, len); +} + #endif diff --git a/include/crypto/internal/rsa.h b/include/crypto/internal/rsa.h new file mode 100644 index 000000000000..a8c86365439f --- /dev/null +++ b/include/crypto/internal/rsa.h @@ -0,0 +1,27 @@ +/* + * RSA internal helpers + * + * Copyright (c) 2015, Intel Corporation + * Authors: Tadeusz Struk <tadeusz.struk@intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ +#ifndef _RSA_HELPER_ +#define _RSA_HELPER_ +#include <linux/mpi.h> + +struct rsa_key { + MPI n; + MPI e; + MPI d; +}; + +int rsa_parse_key(struct rsa_key *rsa_key, const void *key, + unsigned int key_len); + +void rsa_free_key(struct rsa_key *rsa_key); +#endif diff --git a/include/crypto/md5.h b/include/crypto/md5.h index 65f299b08b0d..146af825eedb 100644 --- a/include/crypto/md5.h +++ b/include/crypto/md5.h @@ -8,6 +8,11 @@ #define MD5_BLOCK_WORDS 16 #define MD5_HASH_WORDS 4 +#define MD5_H0 0x67452301UL +#define MD5_H1 0xefcdab89UL +#define MD5_H2 0x98badcfeUL +#define MD5_H3 0x10325476UL + struct md5_state { u32 hash[MD5_HASH_WORDS]; u32 block[MD5_BLOCK_WORDS]; diff --git a/include/crypto/null.h b/include/crypto/null.h index b7c864cc70df..06dc30d9f56e 100644 --- a/include/crypto/null.h +++ b/include/crypto/null.h @@ -8,4 +8,7 @@ #define NULL_DIGEST_SIZE 0 #define NULL_IV_SIZE 0 +struct crypto_blkcipher *crypto_get_default_null_skcipher(void); +void crypto_put_default_null_skcipher(void); + #endif diff --git a/include/crypto/rng.h b/include/crypto/rng.h index 6e28ea5be9f1..b95ede354a66 100644 --- a/include/crypto/rng.h +++ b/include/crypto/rng.h @@ -2,6 +2,7 @@ * RNG: Random Number Generator algorithms under the crypto API * * Copyright (c) 2008 Neil Horman <nhorman@tuxdriver.com> + * Copyright (c) 2015 Herbert Xu <herbert@gondor.apana.org.au> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -15,6 +16,50 @@ #include <linux/crypto.h> +struct crypto_rng; + +/** + * struct rng_alg - random number generator definition + * + * @generate: The function defined by this variable obtains a + * random number. The random number generator transform + * must generate the random number out of the context + * provided with this call, plus any additional data + * if provided to the call. + * @seed: Seed or reseed the random number generator. With the + * invocation of this function call, the random number + * generator shall become ready for generation. If the + * random number generator requires a seed for setting + * up a new state, the seed must be provided by the + * consumer while invoking this function. The required + * size of the seed is defined with @seedsize . + * @set_ent: Set entropy that would otherwise be obtained from + * entropy source. Internal use only. + * @seedsize: The seed size required for a random number generator + * initialization defined with this variable. Some + * random number generators does not require a seed + * as the seeding is implemented internally without + * the need of support by the consumer. In this case, + * the seed size is set to zero. + * @base: Common crypto API algorithm data structure. + */ +struct rng_alg { + int (*generate)(struct crypto_rng *tfm, + const u8 *src, unsigned int slen, + u8 *dst, unsigned int dlen); + int (*seed)(struct crypto_rng *tfm, const u8 *seed, unsigned int slen); + void (*set_ent)(struct crypto_rng *tfm, const u8 *data, + unsigned int len); + + unsigned int seedsize; + + struct crypto_alg base; +}; + +struct crypto_rng { + struct crypto_tfm base; +}; + extern struct crypto_rng *crypto_default_rng; int crypto_get_default_rng(void); @@ -27,11 +72,6 @@ void crypto_put_default_rng(void); * CRYPTO_ALG_TYPE_RNG (listed as type "rng" in /proc/crypto) */ -static inline struct crypto_rng *__crypto_rng_cast(struct crypto_tfm *tfm) -{ - return (struct crypto_rng *)tfm; -} - /** * crypto_alloc_rng() -- allocate RNG handle * @alg_name: is the cra_name / name or cra_driver_name / driver name of the @@ -52,15 +92,7 @@ static inline struct crypto_rng *__crypto_rng_cast(struct crypto_tfm *tfm) * Return: allocated cipher handle in case of success; IS_ERR() is true in case * of an error, PTR_ERR() returns the error code. */ -static inline struct crypto_rng *crypto_alloc_rng(const char *alg_name, - u32 type, u32 mask) -{ - type &= ~CRYPTO_ALG_TYPE_MASK; - type |= CRYPTO_ALG_TYPE_RNG; - mask |= CRYPTO_ALG_TYPE_MASK; - - return __crypto_rng_cast(crypto_alloc_base(alg_name, type, mask)); -} +struct crypto_rng *crypto_alloc_rng(const char *alg_name, u32 type, u32 mask); static inline struct crypto_tfm *crypto_rng_tfm(struct crypto_rng *tfm) { @@ -77,12 +109,8 @@ static inline struct crypto_tfm *crypto_rng_tfm(struct crypto_rng *tfm) */ static inline struct rng_alg *crypto_rng_alg(struct crypto_rng *tfm) { - return &crypto_rng_tfm(tfm)->__crt_alg->cra_rng; -} - -static inline struct rng_tfm *crypto_rng_crt(struct crypto_rng *tfm) -{ - return &crypto_rng_tfm(tfm)->crt_rng; + return container_of(crypto_rng_tfm(tfm)->__crt_alg, + struct rng_alg, base); } /** @@ -91,7 +119,28 @@ static inline struct rng_tfm *crypto_rng_crt(struct crypto_rng *tfm) */ static inline void crypto_free_rng(struct crypto_rng *tfm) { - crypto_free_tfm(crypto_rng_tfm(tfm)); + crypto_destroy_tfm(tfm, crypto_rng_tfm(tfm)); +} + +/** + * crypto_rng_generate() - get random number + * @tfm: cipher handle + * @src: Input buffer holding additional data, may be NULL + * @slen: Length of additional data + * @dst: output buffer holding the random numbers + * @dlen: length of the output buffer + * + * This function fills the caller-allocated buffer with random + * numbers using the random number generator referenced by the + * cipher handle. + * + * Return: 0 function was successful; < 0 if an error occurred + */ +static inline int crypto_rng_generate(struct crypto_rng *tfm, + const u8 *src, unsigned int slen, + u8 *dst, unsigned int dlen) +{ + return crypto_rng_alg(tfm)->generate(tfm, src, slen, dst, dlen); } /** @@ -108,7 +157,7 @@ static inline void crypto_free_rng(struct crypto_rng *tfm) static inline int crypto_rng_get_bytes(struct crypto_rng *tfm, u8 *rdata, unsigned int dlen) { - return crypto_rng_crt(tfm)->rng_gen_random(tfm, rdata, dlen); + return crypto_rng_generate(tfm, NULL, 0, rdata, dlen); } /** @@ -128,11 +177,8 @@ static inline int crypto_rng_get_bytes(struct crypto_rng *tfm, * * Return: 0 if the setting of the key was successful; < 0 if an error occurred */ -static inline int crypto_rng_reset(struct crypto_rng *tfm, - u8 *seed, unsigned int slen) -{ - return crypto_rng_crt(tfm)->rng_reset(tfm, seed, slen); -} +int crypto_rng_reset(struct crypto_rng *tfm, const u8 *seed, + unsigned int slen); /** * crypto_rng_seedsize() - obtain seed size of RNG diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h index 20e4226a2e14..96670e7e7c14 100644 --- a/include/crypto/scatterwalk.h +++ b/include/crypto/scatterwalk.h @@ -102,4 +102,8 @@ void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg, int scatterwalk_bytes_sglen(struct scatterlist *sg, int num_bytes); +struct scatterlist *scatterwalk_ffwd(struct scatterlist dst[2], + struct scatterlist *src, + unsigned int len); + #endif /* _CRYPTO_SCATTERWALK_H */ diff --git a/include/dt-bindings/mfd/arizona.h b/include/dt-bindings/mfd/arizona.h index c7af7c7ef793..555609910acb 100644 --- a/include/dt-bindings/mfd/arizona.h +++ b/include/dt-bindings/mfd/arizona.h @@ -90,4 +90,18 @@ #define ARIZONA_INMODE_SE 1 #define ARIZONA_INMODE_DMIC 2 +#define ARIZONA_MICD_TIME_CONTINUOUS 0 +#define ARIZONA_MICD_TIME_250US 1 +#define ARIZONA_MICD_TIME_500US 2 +#define ARIZONA_MICD_TIME_1MS 3 +#define ARIZONA_MICD_TIME_2MS 4 +#define ARIZONA_MICD_TIME_4MS 5 +#define ARIZONA_MICD_TIME_8MS 6 +#define ARIZONA_MICD_TIME_16MS 7 +#define ARIZONA_MICD_TIME_32MS 8 +#define ARIZONA_MICD_TIME_64MS 9 +#define ARIZONA_MICD_TIME_128MS 10 +#define ARIZONA_MICD_TIME_256MS 11 +#define ARIZONA_MICD_TIME_512MS 12 + #endif diff --git a/include/dt-bindings/mfd/st-lpc.h b/include/dt-bindings/mfd/st-lpc.h new file mode 100644 index 000000000000..e3e6c75d8822 --- /dev/null +++ b/include/dt-bindings/mfd/st-lpc.h @@ -0,0 +1,15 @@ +/* + * This header provides shared DT/Driver defines for ST's LPC device + * + * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved + * + * Author: Lee Jones <lee.jones@linaro.org> for STMicroelectronics + */ + +#ifndef __DT_BINDINGS_ST_LPC_H__ +#define __DT_BINDINGS_ST_LPC_H__ + +#define ST_LPC_MODE_RTC 0 +#define ST_LPC_MODE_WDT 1 + +#endif /* __DT_BINDINGS_ST_LPC_H__ */ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index e4da5e35e29c..c187817471fb 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -158,6 +158,16 @@ typedef u32 phys_cpuid_t; #define PHYS_CPUID_INVALID (phys_cpuid_t)(-1) #endif +static inline bool invalid_logical_cpuid(u32 cpuid) +{ + return (int)cpuid < 0; +} + +static inline bool invalid_phys_cpuid(phys_cpuid_t phys_id) +{ + return phys_id == PHYS_CPUID_INVALID; +} + #ifdef CONFIG_ACPI_HOTPLUG_CPU /* Arch dependent functions for cpu hotplug support */ int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu); @@ -243,50 +253,12 @@ extern bool wmi_has_guid(const char *guid); #define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR 0x0400 #define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO 0x0800 -#if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) - -extern long acpi_video_get_capabilities(acpi_handle graphics_dev_handle); +extern char acpi_video_backlight_string[]; extern long acpi_is_video_device(acpi_handle handle); -extern void acpi_video_dmi_promote_vendor(void); -extern void acpi_video_dmi_demote_vendor(void); -extern int acpi_video_backlight_support(void); -extern int acpi_video_display_switch_support(void); - -#else - -static inline long acpi_video_get_capabilities(acpi_handle graphics_dev_handle) -{ - return 0; -} - -static inline long acpi_is_video_device(acpi_handle handle) -{ - return 0; -} - -static inline void acpi_video_dmi_promote_vendor(void) -{ -} - -static inline void acpi_video_dmi_demote_vendor(void) -{ -} - -static inline int acpi_video_backlight_support(void) -{ - return 0; -} - -static inline int acpi_video_display_switch_support(void) -{ - return 0; -} - -#endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */ - extern int acpi_blacklisted(void); extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d); extern void acpi_osi_setup(char *str); +extern bool acpi_osi_is_win8(void); #ifdef CONFIG_ACPI_NUMA int acpi_get_node(acpi_handle handle); @@ -332,6 +304,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n, int acpi_resources_are_enforced(void); +int acpi_reserve_region(u64 start, unsigned int length, u8 space_id, + unsigned long flags, char *desc); + #ifdef CONFIG_HIBERNATION void __init acpi_no_s4_hw_signature(void); #endif @@ -440,6 +415,7 @@ extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, #define ACPI_OST_SC_INSERT_NOT_SUPPORTED 0x82 extern void acpi_early_init(void); +extern void acpi_subsystem_init(void); extern int acpi_nvs_register(__u64 start, __u64 size); @@ -494,6 +470,7 @@ static inline const char *acpi_dev_name(struct acpi_device *adev) } static inline void acpi_early_init(void) { } +static inline void acpi_subsystem_init(void) { } static inline int early_acpi_boot_init(void) { @@ -525,6 +502,13 @@ static inline int acpi_check_region(resource_size_t start, resource_size_t n, return 0; } +static inline int acpi_reserve_region(u64 start, unsigned int length, + u8 space_id, unsigned long flags, + char *desc) +{ + return -ENXIO; +} + struct acpi_table_header; static inline int acpi_table_parse(char *id, int (*handler)(struct acpi_table_header *)) @@ -569,6 +553,11 @@ static inline int acpi_device_modalias(struct device *dev, return -ENODEV; } +static inline bool acpi_check_dma(struct acpi_device *adev, bool *coherent) +{ + return false; +} + #define ACPI_PTR(_ptr) (NULL) #endif /* !CONFIG_ACPI */ @@ -721,6 +710,8 @@ static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev) if (adev) adev->driver_gpios = NULL; } + +int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index); #else static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev, const struct acpi_gpio_mapping *gpios) @@ -728,6 +719,11 @@ static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev, return -ENXIO; } static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev) {} + +static inline int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index) +{ + return -ENXIO; +} #endif /* Device properties */ diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h index a899402a5a0e..52f3b7da4f2d 100644 --- a/include/linux/alarmtimer.h +++ b/include/linux/alarmtimer.h @@ -43,8 +43,8 @@ struct alarm { void alarm_init(struct alarm *alarm, enum alarmtimer_type type, enum alarmtimer_restart (*function)(struct alarm *, ktime_t)); -int alarm_start(struct alarm *alarm, ktime_t start); -int alarm_start_relative(struct alarm *alarm, ktime_t start); +void alarm_start(struct alarm *alarm, ktime_t start); +void alarm_start_relative(struct alarm *alarm, ktime_t start); void alarm_restart(struct alarm *alarm); int alarm_try_to_cancel(struct alarm *alarm); int alarm_cancel(struct alarm *alarm); diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index aff923ae8c4b..d87d8eced064 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -116,7 +116,6 @@ __printf(3, 4) int bdi_register(struct backing_dev_info *bdi, struct device *parent, const char *fmt, ...); int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev); -void bdi_unregister(struct backing_dev_info *bdi); int __must_check bdi_setup_and_register(struct backing_dev_info *, char *); void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages, enum wb_reason reason); diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h index 0e97856b2cff..14eea946e640 100644 --- a/include/linux/basic_mmio_gpio.h +++ b/include/linux/basic_mmio_gpio.h @@ -74,5 +74,6 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev, #define BGPIOF_UNREADABLE_REG_SET BIT(1) /* reg_set is unreadable */ #define BGPIOF_UNREADABLE_REG_DIR BIT(2) /* reg_dir is unreadable */ #define BGPIOF_BIG_ENDIAN_BYTE_ORDER BIT(3) +#define BGPIOF_READ_OUTPUT_REG_SET BIT(4) /* reg_set stores output value */ #endif /* __BASIC_MMIO_GPIO_H */ diff --git a/include/linux/clk.h b/include/linux/clk.h index 68c16a6bedb3..0df4a51e1a78 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -306,6 +306,20 @@ void devm_clk_put(struct device *dev, struct clk *clk); * @clk: clock source * @rate: desired clock rate in Hz * + * This answers the question "if I were to pass @rate to clk_set_rate(), + * what clock rate would I end up with?" without changing the hardware + * in any way. In other words: + * + * rate = clk_round_rate(clk, r); + * + * and: + * + * clk_set_rate(clk, r); + * rate = clk_get_rate(clk); + * + * are equivalent except the former does not modify the clock hardware + * in any way. + * * Returns rounded clock rate in Hz, or negative errno. */ long clk_round_rate(struct clk *clk, unsigned long rate); @@ -471,19 +485,6 @@ static inline void clk_disable_unprepare(struct clk *clk) clk_unprepare(clk); } -/** - * clk_add_alias - add a new clock alias - * @alias: name for clock alias - * @alias_dev_name: device name - * @id: platform specific clock name - * @dev: device - * - * Allows using generic clock names for drivers by adding a new alias. - * Assumes clkdev, see clkdev.h for more info. - */ -int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, - struct device *dev); - struct device_node; struct of_phandle_args; diff --git a/include/linux/clkdev.h b/include/linux/clkdev.h index 94bad77eeb4a..a240b18e86fa 100644 --- a/include/linux/clkdev.h +++ b/include/linux/clkdev.h @@ -22,6 +22,7 @@ struct clk_lookup { const char *dev_id; const char *con_id; struct clk *clk; + struct clk_hw *clk_hw; }; #define CLKDEV_INIT(d, n, c) \ @@ -37,8 +38,11 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id, void clkdev_add(struct clk_lookup *cl); void clkdev_drop(struct clk_lookup *cl); +struct clk_lookup *clkdev_create(struct clk *clk, const char *con_id, + const char *dev_fmt, ...); + void clkdev_add_table(struct clk_lookup *, size_t); -int clk_add_alias(const char *, const char *, char *, struct device *); +int clk_add_alias(const char *, const char *, const char *, struct device *); int clk_register_clkdev(struct clk *, const char *, const char *, ...); int clk_register_clkdevs(struct clk *, struct clk_lookup *, size_t); diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index 96c280b2c263..597a1e836f22 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -37,12 +37,15 @@ enum clock_event_mode { * reached from DETACHED or SHUTDOWN. * ONESHOT: Device is programmed to generate event only once. Can be reached * from DETACHED or SHUTDOWN. + * ONESHOT_STOPPED: Device was programmed in ONESHOT mode and is temporarily + * stopped. */ enum clock_event_state { CLOCK_EVT_STATE_DETACHED, CLOCK_EVT_STATE_SHUTDOWN, CLOCK_EVT_STATE_PERIODIC, CLOCK_EVT_STATE_ONESHOT, + CLOCK_EVT_STATE_ONESHOT_STOPPED, }; /* @@ -84,12 +87,13 @@ enum clock_event_state { * @mult: nanosecond to cycles multiplier * @shift: nanoseconds to cycles divisor (power of two) * @mode: operating mode, relevant only to ->set_mode(), OBSOLETE - * @state: current state of the device, assigned by the core code + * @state_use_accessors:current state of the device, assigned by the core code * @features: features * @retries: number of forced programming retries * @set_mode: legacy set mode function, only for modes <= CLOCK_EVT_MODE_RESUME. * @set_state_periodic: switch state to periodic, if !set_mode * @set_state_oneshot: switch state to oneshot, if !set_mode + * @set_state_oneshot_stopped: switch state to oneshot_stopped, if !set_mode * @set_state_shutdown: switch state to shutdown, if !set_mode * @tick_resume: resume clkevt device, if !set_mode * @broadcast: function to broadcast events @@ -113,7 +117,7 @@ struct clock_event_device { u32 mult; u32 shift; enum clock_event_mode mode; - enum clock_event_state state; + enum clock_event_state state_use_accessors; unsigned int features; unsigned long retries; @@ -121,11 +125,12 @@ struct clock_event_device { * State transition callback(s): Only one of the two groups should be * defined: * - set_mode(), only for modes <= CLOCK_EVT_MODE_RESUME. - * - set_state_{shutdown|periodic|oneshot}(), tick_resume(). + * - set_state_{shutdown|periodic|oneshot|oneshot_stopped}(), tick_resume(). */ void (*set_mode)(enum clock_event_mode mode, struct clock_event_device *); int (*set_state_periodic)(struct clock_event_device *); int (*set_state_oneshot)(struct clock_event_device *); + int (*set_state_oneshot_stopped)(struct clock_event_device *); int (*set_state_shutdown)(struct clock_event_device *); int (*tick_resume)(struct clock_event_device *); @@ -144,6 +149,32 @@ struct clock_event_device { struct module *owner; } ____cacheline_aligned; +/* Helpers to verify state of a clockevent device */ +static inline bool clockevent_state_detached(struct clock_event_device *dev) +{ + return dev->state_use_accessors == CLOCK_EVT_STATE_DETACHED; +} + +static inline bool clockevent_state_shutdown(struct clock_event_device *dev) +{ + return dev->state_use_accessors == CLOCK_EVT_STATE_SHUTDOWN; +} + +static inline bool clockevent_state_periodic(struct clock_event_device *dev) +{ + return dev->state_use_accessors == CLOCK_EVT_STATE_PERIODIC; +} + +static inline bool clockevent_state_oneshot(struct clock_event_device *dev) +{ + return dev->state_use_accessors == CLOCK_EVT_STATE_ONESHOT; +} + +static inline bool clockevent_state_oneshot_stopped(struct clock_event_device *dev) +{ + return dev->state_use_accessors == CLOCK_EVT_STATE_ONESHOT_STOPPED; +} + /* * Calculate a multiplication factor for scaled math, which is used to convert * nanoseconds based values to clock ticks: diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index d27d0152271f..278dd279a7a8 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -181,7 +181,6 @@ static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift) extern int clocksource_unregister(struct clocksource*); extern void clocksource_touch_watchdog(void); -extern struct clocksource* clocksource_get_next(void); extern void clocksource_change_rating(struct clocksource *cs, int rating); extern void clocksource_suspend(void); extern void clocksource_resume(void); diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 867722591be2..05be2352fef8 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -250,7 +250,23 @@ static __always_inline void __write_once_size(volatile void *p, void *res, int s ({ union { typeof(x) __val; char __c[1]; } __u; __read_once_size(&(x), __u.__c, sizeof(x)); __u.__val; }) #define WRITE_ONCE(x, val) \ - ({ typeof(x) __val = (val); __write_once_size(&(x), &__val, sizeof(__val)); __val; }) + ({ union { typeof(x) __val; char __c[1]; } __u = { .__val = (val) }; __write_once_size(&(x), __u.__c, sizeof(x)); __u.__val; }) + +/** + * READ_ONCE_CTRL - Read a value heading a control dependency + * @x: The value to be read, heading the control dependency + * + * Control dependencies are tricky. See Documentation/memory-barriers.txt + * for important information on how to use them. Note that in many cases, + * use of smp_load_acquire() will be much simpler. Control dependencies + * should be avoided except on the hottest of hotpaths. + */ +#define READ_ONCE_CTRL(x) \ +({ \ + typeof(x) __val = READ_ONCE(x); \ + smp_read_barrier_depends(); /* Enforce control dependency. */ \ + __val; \ +}) #endif /* __KERNEL__ */ @@ -450,7 +466,7 @@ static __always_inline void __write_once_size(volatile void *p, void *res, int s * with an explicit memory barrier or atomic instruction that provides the * required ordering. * - * If possible use READ_ONCE/ASSIGN_ONCE instead. + * If possible use READ_ONCE()/WRITE_ONCE() instead. */ #define __ACCESS_ONCE(x) ({ \ __maybe_unused typeof(x) __var = (__force typeof(x)) 0; \ diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h index 2821838256b4..b96bd299966f 100644 --- a/include/linux/context_tracking.h +++ b/include/linux/context_tracking.h @@ -14,8 +14,6 @@ extern void context_tracking_enter(enum ctx_state state); extern void context_tracking_exit(enum ctx_state state); extern void context_tracking_user_enter(void); extern void context_tracking_user_exit(void); -extern void __context_tracking_task_switch(struct task_struct *prev, - struct task_struct *next); static inline void user_enter(void) { @@ -51,19 +49,11 @@ static inline void exception_exit(enum ctx_state prev_ctx) } } -static inline void context_tracking_task_switch(struct task_struct *prev, - struct task_struct *next) -{ - if (context_tracking_is_enabled()) - __context_tracking_task_switch(prev, next); -} #else static inline void user_enter(void) { } static inline void user_exit(void) { } static inline enum ctx_state exception_enter(void) { return 0; } static inline void exception_exit(enum ctx_state prev_ctx) { } -static inline void context_tracking_task_switch(struct task_struct *prev, - struct task_struct *next) { } #endif /* !CONFIG_CONTEXT_TRACKING */ diff --git a/include/linux/context_tracking_state.h b/include/linux/context_tracking_state.h index 6b7b96a32b75..678ecdf90cf6 100644 --- a/include/linux/context_tracking_state.h +++ b/include/linux/context_tracking_state.h @@ -12,6 +12,7 @@ struct context_tracking { * may be further optimized using static keys. */ bool active; + int recursion; enum ctx_state { CONTEXT_KERNEL = 0, CONTEXT_USER, diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 2ee4888c1f47..29ad97c34fd5 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -65,7 +65,9 @@ struct cpufreq_policy { unsigned int shared_type; /* ACPI: ANY or ALL affected CPUs should set cpufreq */ - unsigned int cpu; /* cpu nr of CPU managing this policy */ + unsigned int cpu; /* cpu managing this policy, must be online */ + unsigned int kobj_cpu; /* cpu managing sysfs files, can be offline */ + struct clk *clk; struct cpufreq_cpuinfo cpuinfo;/* see above */ @@ -80,6 +82,7 @@ struct cpufreq_policy { struct cpufreq_governor *governor; /* see below */ void *governor_data; bool governor_enabled; /* governor start/stop flag */ + char last_governor[CPUFREQ_NAME_LEN]; /* last governor used */ struct work_struct update; /* if update_policy() needs to be * called, but you're in IRQ context */ diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 9c5e89254796..d075d34279df 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -151,10 +151,6 @@ extern void cpuidle_resume(void); extern int cpuidle_enable_device(struct cpuidle_device *dev); extern void cpuidle_disable_device(struct cpuidle_device *dev); extern int cpuidle_play_dead(void); -extern int cpuidle_find_deepest_state(struct cpuidle_driver *drv, - struct cpuidle_device *dev); -extern int cpuidle_enter_freeze(struct cpuidle_driver *drv, - struct cpuidle_device *dev); extern struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev); #else @@ -190,16 +186,28 @@ static inline int cpuidle_enable_device(struct cpuidle_device *dev) {return -ENODEV; } static inline void cpuidle_disable_device(struct cpuidle_device *dev) { } static inline int cpuidle_play_dead(void) {return -ENODEV; } +static inline struct cpuidle_driver *cpuidle_get_cpu_driver( + struct cpuidle_device *dev) {return NULL; } +#endif + +#if defined(CONFIG_CPU_IDLE) && defined(CONFIG_SUSPEND) +extern int cpuidle_find_deepest_state(struct cpuidle_driver *drv, + struct cpuidle_device *dev); +extern int cpuidle_enter_freeze(struct cpuidle_driver *drv, + struct cpuidle_device *dev); +#else static inline int cpuidle_find_deepest_state(struct cpuidle_driver *drv, struct cpuidle_device *dev) {return -ENODEV; } static inline int cpuidle_enter_freeze(struct cpuidle_driver *drv, struct cpuidle_device *dev) {return -ENODEV; } -static inline struct cpuidle_driver *cpuidle_get_cpu_driver( - struct cpuidle_device *dev) {return NULL; } #endif +/* kernel/sched/idle.c */ +extern void sched_idle_set_state(struct cpuidle_state *idle_state); +extern void default_idle_call(void); + #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a); #else diff --git a/include/linux/crc-itu-t.h b/include/linux/crc-itu-t.h index 84920f3cc83e..a9953c762eee 100644 --- a/include/linux/crc-itu-t.h +++ b/include/linux/crc-itu-t.h @@ -3,7 +3,7 @@ * * Implements the standard CRC ITU-T V.41: * Width 16 - * Poly 0x0x1021 (x^16 + x^12 + x^15 + 1) + * Poly 0x1021 (x^16 + x^12 + x^15 + 1) * Init 0 * * This source code is licensed under the GNU General Public License, diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 10df5d2d093a..81ef938b0a8e 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -53,6 +53,7 @@ #define CRYPTO_ALG_TYPE_SHASH 0x00000009 #define CRYPTO_ALG_TYPE_AHASH 0x0000000a #define CRYPTO_ALG_TYPE_RNG 0x0000000c +#define CRYPTO_ALG_TYPE_AKCIPHER 0x0000000d #define CRYPTO_ALG_TYPE_PCOMPRESS 0x0000000f #define CRYPTO_ALG_TYPE_HASH_MASK 0x0000000e @@ -101,6 +102,12 @@ #define CRYPTO_ALG_INTERNAL 0x00002000 /* + * Temporary flag used to prevent legacy AEAD implementations from + * being used by user-space. + */ +#define CRYPTO_ALG_AEAD_NEW 0x00004000 + +/* * Transform masks and values (for crt_flags). */ #define CRYPTO_TFM_REQ_MASK 0x000fff00 @@ -138,9 +145,9 @@ struct crypto_async_request; struct crypto_aead; struct crypto_blkcipher; struct crypto_hash; -struct crypto_rng; struct crypto_tfm; struct crypto_type; +struct aead_request; struct aead_givcrypt_request; struct skcipher_givcrypt_request; @@ -175,32 +182,6 @@ struct ablkcipher_request { void *__ctx[] CRYPTO_MINALIGN_ATTR; }; -/** - * struct aead_request - AEAD request - * @base: Common attributes for async crypto requests - * @assoclen: Length in bytes of associated data for authentication - * @cryptlen: Length of data to be encrypted or decrypted - * @iv: Initialisation vector - * @assoc: Associated data - * @src: Source data - * @dst: Destination data - * @__ctx: Start of private context data - */ -struct aead_request { - struct crypto_async_request base; - - unsigned int assoclen; - unsigned int cryptlen; - - u8 *iv; - - struct scatterlist *assoc; - struct scatterlist *src; - struct scatterlist *dst; - - void *__ctx[] CRYPTO_MINALIGN_ATTR; -}; - struct blkcipher_desc { struct crypto_blkcipher *tfm; void *info; @@ -294,7 +275,7 @@ struct ablkcipher_alg { }; /** - * struct aead_alg - AEAD cipher definition + * struct old_aead_alg - AEAD cipher definition * @maxauthsize: Set the maximum authentication tag size supported by the * transformation. A transformation may support smaller tag sizes. * As the authentication tag is a message digest to ensure the @@ -319,7 +300,7 @@ struct ablkcipher_alg { * All fields except @givencrypt , @givdecrypt , @geniv and @ivsize are * mandatory and must be filled. */ -struct aead_alg { +struct old_aead_alg { int (*setkey)(struct crypto_aead *tfm, const u8 *key, unsigned int keylen); int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize); @@ -426,40 +407,12 @@ struct compress_alg { unsigned int slen, u8 *dst, unsigned int *dlen); }; -/** - * struct rng_alg - random number generator definition - * @rng_make_random: The function defined by this variable obtains a random - * number. The random number generator transform must generate - * the random number out of the context provided with this - * call. - * @rng_reset: Reset of the random number generator by clearing the entire state. - * With the invocation of this function call, the random number - * generator shall completely reinitialize its state. If the random - * number generator requires a seed for setting up a new state, - * the seed must be provided by the consumer while invoking this - * function. The required size of the seed is defined with - * @seedsize . - * @seedsize: The seed size required for a random number generator - * initialization defined with this variable. Some random number - * generators like the SP800-90A DRBG does not require a seed as the - * seeding is implemented internally without the need of support by - * the consumer. In this case, the seed size is set to zero. - */ -struct rng_alg { - int (*rng_make_random)(struct crypto_rng *tfm, u8 *rdata, - unsigned int dlen); - int (*rng_reset)(struct crypto_rng *tfm, u8 *seed, unsigned int slen); - - unsigned int seedsize; -}; - #define cra_ablkcipher cra_u.ablkcipher #define cra_aead cra_u.aead #define cra_blkcipher cra_u.blkcipher #define cra_cipher cra_u.cipher #define cra_compress cra_u.compress -#define cra_rng cra_u.rng /** * struct crypto_alg - definition of a cryptograpic cipher algorithm @@ -505,7 +458,7 @@ struct rng_alg { * transformation algorithm. * @cra_type: Type of the cryptographic transformation. This is a pointer to * struct crypto_type, which implements callbacks common for all - * trasnformation types. There are multiple options: + * transformation types. There are multiple options: * &crypto_blkcipher_type, &crypto_ablkcipher_type, * &crypto_ahash_type, &crypto_aead_type, &crypto_rng_type. * This field might be empty. In that case, there are no common @@ -555,11 +508,10 @@ struct crypto_alg { union { struct ablkcipher_alg ablkcipher; - struct aead_alg aead; + struct old_aead_alg aead; struct blkcipher_alg blkcipher; struct cipher_alg cipher; struct compress_alg compress; - struct rng_alg rng; } cra_u; int (*cra_init)(struct crypto_tfm *tfm); @@ -567,7 +519,7 @@ struct crypto_alg { void (*cra_destroy)(struct crypto_alg *alg); struct module *cra_module; -}; +} CRYPTO_MINALIGN_ATTR; /* * Algorithm registration interface. @@ -602,21 +554,6 @@ struct ablkcipher_tfm { unsigned int reqsize; }; -struct aead_tfm { - int (*setkey)(struct crypto_aead *tfm, const u8 *key, - unsigned int keylen); - int (*encrypt)(struct aead_request *req); - int (*decrypt)(struct aead_request *req); - int (*givencrypt)(struct aead_givcrypt_request *req); - int (*givdecrypt)(struct aead_givcrypt_request *req); - - struct crypto_aead *base; - - unsigned int ivsize; - unsigned int authsize; - unsigned int reqsize; -}; - struct blkcipher_tfm { void *iv; int (*setkey)(struct crypto_tfm *tfm, const u8 *key, @@ -655,19 +592,11 @@ struct compress_tfm { u8 *dst, unsigned int *dlen); }; -struct rng_tfm { - int (*rng_gen_random)(struct crypto_rng *tfm, u8 *rdata, - unsigned int dlen); - int (*rng_reset)(struct crypto_rng *tfm, u8 *seed, unsigned int slen); -}; - #define crt_ablkcipher crt_u.ablkcipher -#define crt_aead crt_u.aead #define crt_blkcipher crt_u.blkcipher #define crt_cipher crt_u.cipher #define crt_hash crt_u.hash #define crt_compress crt_u.compress -#define crt_rng crt_u.rng struct crypto_tfm { @@ -675,12 +604,10 @@ struct crypto_tfm { union { struct ablkcipher_tfm ablkcipher; - struct aead_tfm aead; struct blkcipher_tfm blkcipher; struct cipher_tfm cipher; struct hash_tfm hash; struct compress_tfm compress; - struct rng_tfm rng; } crt_u; void (*exit)(struct crypto_tfm *tfm); @@ -694,10 +621,6 @@ struct crypto_ablkcipher { struct crypto_tfm base; }; -struct crypto_aead { - struct crypto_tfm base; -}; - struct crypto_blkcipher { struct crypto_tfm base; }; @@ -714,10 +637,6 @@ struct crypto_hash { struct crypto_tfm base; }; -struct crypto_rng { - struct crypto_tfm base; -}; - enum { CRYPTOA_UNSPEC, CRYPTOA_ALG, @@ -1194,400 +1113,6 @@ static inline void ablkcipher_request_set_crypt( } /** - * DOC: Authenticated Encryption With Associated Data (AEAD) Cipher API - * - * The AEAD cipher API is used with the ciphers of type CRYPTO_ALG_TYPE_AEAD - * (listed as type "aead" in /proc/crypto) - * - * The most prominent examples for this type of encryption is GCM and CCM. - * However, the kernel supports other types of AEAD ciphers which are defined - * with the following cipher string: - * - * authenc(keyed message digest, block cipher) - * - * For example: authenc(hmac(sha256), cbc(aes)) - * - * The example code provided for the asynchronous block cipher operation - * applies here as well. Naturally all *ablkcipher* symbols must be exchanged - * the *aead* pendants discussed in the following. In addtion, for the AEAD - * operation, the aead_request_set_assoc function must be used to set the - * pointer to the associated data memory location before performing the - * encryption or decryption operation. In case of an encryption, the associated - * data memory is filled during the encryption operation. For decryption, the - * associated data memory must contain data that is used to verify the integrity - * of the decrypted data. Another deviation from the asynchronous block cipher - * operation is that the caller should explicitly check for -EBADMSG of the - * crypto_aead_decrypt. That error indicates an authentication error, i.e. - * a breach in the integrity of the message. In essence, that -EBADMSG error - * code is the key bonus an AEAD cipher has over "standard" block chaining - * modes. - */ - -static inline struct crypto_aead *__crypto_aead_cast(struct crypto_tfm *tfm) -{ - return (struct crypto_aead *)tfm; -} - -/** - * crypto_alloc_aead() - allocate AEAD cipher handle - * @alg_name: is the cra_name / name or cra_driver_name / driver name of the - * AEAD cipher - * @type: specifies the type of the cipher - * @mask: specifies the mask for the cipher - * - * Allocate a cipher handle for an AEAD. The returned struct - * crypto_aead is the cipher handle that is required for any subsequent - * API invocation for that AEAD. - * - * Return: allocated cipher handle in case of success; IS_ERR() is true in case - * of an error, PTR_ERR() returns the error code. - */ -struct crypto_aead *crypto_alloc_aead(const char *alg_name, u32 type, u32 mask); - -static inline struct crypto_tfm *crypto_aead_tfm(struct crypto_aead *tfm) -{ - return &tfm->base; -} - -/** - * crypto_free_aead() - zeroize and free aead handle - * @tfm: cipher handle to be freed - */ -static inline void crypto_free_aead(struct crypto_aead *tfm) -{ - crypto_free_tfm(crypto_aead_tfm(tfm)); -} - -static inline struct aead_tfm *crypto_aead_crt(struct crypto_aead *tfm) -{ - return &crypto_aead_tfm(tfm)->crt_aead; -} - -/** - * crypto_aead_ivsize() - obtain IV size - * @tfm: cipher handle - * - * The size of the IV for the aead referenced by the cipher handle is - * returned. This IV size may be zero if the cipher does not need an IV. - * - * Return: IV size in bytes - */ -static inline unsigned int crypto_aead_ivsize(struct crypto_aead *tfm) -{ - return crypto_aead_crt(tfm)->ivsize; -} - -/** - * crypto_aead_authsize() - obtain maximum authentication data size - * @tfm: cipher handle - * - * The maximum size of the authentication data for the AEAD cipher referenced - * by the AEAD cipher handle is returned. The authentication data size may be - * zero if the cipher implements a hard-coded maximum. - * - * The authentication data may also be known as "tag value". - * - * Return: authentication data size / tag size in bytes - */ -static inline unsigned int crypto_aead_authsize(struct crypto_aead *tfm) -{ - return crypto_aead_crt(tfm)->authsize; -} - -/** - * crypto_aead_blocksize() - obtain block size of cipher - * @tfm: cipher handle - * - * The block size for the AEAD referenced with the cipher handle is returned. - * The caller may use that information to allocate appropriate memory for the - * data returned by the encryption or decryption operation - * - * Return: block size of cipher - */ -static inline unsigned int crypto_aead_blocksize(struct crypto_aead *tfm) -{ - return crypto_tfm_alg_blocksize(crypto_aead_tfm(tfm)); -} - -static inline unsigned int crypto_aead_alignmask(struct crypto_aead *tfm) -{ - return crypto_tfm_alg_alignmask(crypto_aead_tfm(tfm)); -} - -static inline u32 crypto_aead_get_flags(struct crypto_aead *tfm) -{ - return crypto_tfm_get_flags(crypto_aead_tfm(tfm)); -} - -static inline void crypto_aead_set_flags(struct crypto_aead *tfm, u32 flags) -{ - crypto_tfm_set_flags(crypto_aead_tfm(tfm), flags); -} - -static inline void crypto_aead_clear_flags(struct crypto_aead *tfm, u32 flags) -{ - crypto_tfm_clear_flags(crypto_aead_tfm(tfm), flags); -} - -/** - * crypto_aead_setkey() - set key for cipher - * @tfm: cipher handle - * @key: buffer holding the key - * @keylen: length of the key in bytes - * - * The caller provided key is set for the AEAD referenced by the cipher - * handle. - * - * Note, the key length determines the cipher type. Many block ciphers implement - * different cipher modes depending on the key size, such as AES-128 vs AES-192 - * vs. AES-256. When providing a 16 byte key for an AES cipher handle, AES-128 - * is performed. - * - * Return: 0 if the setting of the key was successful; < 0 if an error occurred - */ -static inline int crypto_aead_setkey(struct crypto_aead *tfm, const u8 *key, - unsigned int keylen) -{ - struct aead_tfm *crt = crypto_aead_crt(tfm); - - return crt->setkey(crt->base, key, keylen); -} - -/** - * crypto_aead_setauthsize() - set authentication data size - * @tfm: cipher handle - * @authsize: size of the authentication data / tag in bytes - * - * Set the authentication data size / tag size. AEAD requires an authentication - * tag (or MAC) in addition to the associated data. - * - * Return: 0 if the setting of the key was successful; < 0 if an error occurred - */ -int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize); - -static inline struct crypto_aead *crypto_aead_reqtfm(struct aead_request *req) -{ - return __crypto_aead_cast(req->base.tfm); -} - -/** - * crypto_aead_encrypt() - encrypt plaintext - * @req: reference to the aead_request handle that holds all information - * needed to perform the cipher operation - * - * Encrypt plaintext data using the aead_request handle. That data structure - * and how it is filled with data is discussed with the aead_request_* - * functions. - * - * IMPORTANT NOTE The encryption operation creates the authentication data / - * tag. That data is concatenated with the created ciphertext. - * The ciphertext memory size is therefore the given number of - * block cipher blocks + the size defined by the - * crypto_aead_setauthsize invocation. The caller must ensure - * that sufficient memory is available for the ciphertext and - * the authentication tag. - * - * Return: 0 if the cipher operation was successful; < 0 if an error occurred - */ -static inline int crypto_aead_encrypt(struct aead_request *req) -{ - return crypto_aead_crt(crypto_aead_reqtfm(req))->encrypt(req); -} - -/** - * crypto_aead_decrypt() - decrypt ciphertext - * @req: reference to the ablkcipher_request handle that holds all information - * needed to perform the cipher operation - * - * Decrypt ciphertext data using the aead_request handle. That data structure - * and how it is filled with data is discussed with the aead_request_* - * functions. - * - * IMPORTANT NOTE The caller must concatenate the ciphertext followed by the - * authentication data / tag. That authentication data / tag - * must have the size defined by the crypto_aead_setauthsize - * invocation. - * - * - * Return: 0 if the cipher operation was successful; -EBADMSG: The AEAD - * cipher operation performs the authentication of the data during the - * decryption operation. Therefore, the function returns this error if - * the authentication of the ciphertext was unsuccessful (i.e. the - * integrity of the ciphertext or the associated data was violated); - * < 0 if an error occurred. - */ -static inline int crypto_aead_decrypt(struct aead_request *req) -{ - if (req->cryptlen < crypto_aead_authsize(crypto_aead_reqtfm(req))) - return -EINVAL; - - return crypto_aead_crt(crypto_aead_reqtfm(req))->decrypt(req); -} - -/** - * DOC: Asynchronous AEAD Request Handle - * - * The aead_request data structure contains all pointers to data required for - * the AEAD cipher operation. This includes the cipher handle (which can be - * used by multiple aead_request instances), pointer to plaintext and - * ciphertext, asynchronous callback function, etc. It acts as a handle to the - * aead_request_* API calls in a similar way as AEAD handle to the - * crypto_aead_* API calls. - */ - -/** - * crypto_aead_reqsize() - obtain size of the request data structure - * @tfm: cipher handle - * - * Return: number of bytes - */ -static inline unsigned int crypto_aead_reqsize(struct crypto_aead *tfm) -{ - return crypto_aead_crt(tfm)->reqsize; -} - -/** - * aead_request_set_tfm() - update cipher handle reference in request - * @req: request handle to be modified - * @tfm: cipher handle that shall be added to the request handle - * - * Allow the caller to replace the existing aead handle in the request - * data structure with a different one. - */ -static inline void aead_request_set_tfm(struct aead_request *req, - struct crypto_aead *tfm) -{ - req->base.tfm = crypto_aead_tfm(crypto_aead_crt(tfm)->base); -} - -/** - * aead_request_alloc() - allocate request data structure - * @tfm: cipher handle to be registered with the request - * @gfp: memory allocation flag that is handed to kmalloc by the API call. - * - * Allocate the request data structure that must be used with the AEAD - * encrypt and decrypt API calls. During the allocation, the provided aead - * handle is registered in the request data structure. - * - * Return: allocated request handle in case of success; IS_ERR() is true in case - * of an error, PTR_ERR() returns the error code. - */ -static inline struct aead_request *aead_request_alloc(struct crypto_aead *tfm, - gfp_t gfp) -{ - struct aead_request *req; - - req = kmalloc(sizeof(*req) + crypto_aead_reqsize(tfm), gfp); - - if (likely(req)) - aead_request_set_tfm(req, tfm); - - return req; -} - -/** - * aead_request_free() - zeroize and free request data structure - * @req: request data structure cipher handle to be freed - */ -static inline void aead_request_free(struct aead_request *req) -{ - kzfree(req); -} - -/** - * aead_request_set_callback() - set asynchronous callback function - * @req: request handle - * @flags: specify zero or an ORing of the flags - * CRYPTO_TFM_REQ_MAY_BACKLOG the request queue may back log and - * increase the wait queue beyond the initial maximum size; - * CRYPTO_TFM_REQ_MAY_SLEEP the request processing may sleep - * @compl: callback function pointer to be registered with the request handle - * @data: The data pointer refers to memory that is not used by the kernel - * crypto API, but provided to the callback function for it to use. Here, - * the caller can provide a reference to memory the callback function can - * operate on. As the callback function is invoked asynchronously to the - * related functionality, it may need to access data structures of the - * related functionality which can be referenced using this pointer. The - * callback function can access the memory via the "data" field in the - * crypto_async_request data structure provided to the callback function. - * - * Setting the callback function that is triggered once the cipher operation - * completes - * - * The callback function is registered with the aead_request handle and - * must comply with the following template - * - * void callback_function(struct crypto_async_request *req, int error) - */ -static inline void aead_request_set_callback(struct aead_request *req, - u32 flags, - crypto_completion_t compl, - void *data) -{ - req->base.complete = compl; - req->base.data = data; - req->base.flags = flags; -} - -/** - * aead_request_set_crypt - set data buffers - * @req: request handle - * @src: source scatter / gather list - * @dst: destination scatter / gather list - * @cryptlen: number of bytes to process from @src - * @iv: IV for the cipher operation which must comply with the IV size defined - * by crypto_aead_ivsize() - * - * Setting the source data and destination data scatter / gather lists. - * - * For encryption, the source is treated as the plaintext and the - * destination is the ciphertext. For a decryption operation, the use is - * reversed - the source is the ciphertext and the destination is the plaintext. - * - * IMPORTANT NOTE AEAD requires an authentication tag (MAC). For decryption, - * the caller must concatenate the ciphertext followed by the - * authentication tag and provide the entire data stream to the - * decryption operation (i.e. the data length used for the - * initialization of the scatterlist and the data length for the - * decryption operation is identical). For encryption, however, - * the authentication tag is created while encrypting the data. - * The destination buffer must hold sufficient space for the - * ciphertext and the authentication tag while the encryption - * invocation must only point to the plaintext data size. The - * following code snippet illustrates the memory usage - * buffer = kmalloc(ptbuflen + (enc ? authsize : 0)); - * sg_init_one(&sg, buffer, ptbuflen + (enc ? authsize : 0)); - * aead_request_set_crypt(req, &sg, &sg, ptbuflen, iv); - */ -static inline void aead_request_set_crypt(struct aead_request *req, - struct scatterlist *src, - struct scatterlist *dst, - unsigned int cryptlen, u8 *iv) -{ - req->src = src; - req->dst = dst; - req->cryptlen = cryptlen; - req->iv = iv; -} - -/** - * aead_request_set_assoc() - set the associated data scatter / gather list - * @req: request handle - * @assoc: associated data scatter / gather list - * @assoclen: number of bytes to process from @assoc - * - * For encryption, the memory is filled with the associated data. For - * decryption, the memory must point to the associated data. - */ -static inline void aead_request_set_assoc(struct aead_request *req, - struct scatterlist *assoc, - unsigned int assoclen) -{ - req->assoc = assoc; - req->assoclen = assoclen; -} - -/** * DOC: Synchronous Block Cipher API * * The synchronous block cipher API is used with the ciphers of type diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index cb25af461054..420311bcee38 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -45,7 +45,6 @@ extern struct dentry *arch_debugfs_dir; /* declared over in file.c */ extern const struct file_operations debugfs_file_operations; -extern const struct inode_operations debugfs_link_operations; struct dentry *debugfs_create_file(const char *name, umode_t mode, struct dentry *parent, void *data, diff --git a/include/linux/dmar.h b/include/linux/dmar.h index 30624954dec5..e9bc9292bd3a 100644 --- a/include/linux/dmar.h +++ b/include/linux/dmar.h @@ -185,33 +185,85 @@ static inline int dmar_device_remove(void *handle) struct irte { union { + /* Shared between remapped and posted mode*/ struct { - __u64 present : 1, - fpd : 1, - dst_mode : 1, - redir_hint : 1, - trigger_mode : 1, - dlvry_mode : 3, - avail : 4, - __reserved_1 : 4, - vector : 8, - __reserved_2 : 8, - dest_id : 32; + __u64 present : 1, /* 0 */ + fpd : 1, /* 1 */ + __res0 : 6, /* 2 - 6 */ + avail : 4, /* 8 - 11 */ + __res1 : 3, /* 12 - 14 */ + pst : 1, /* 15 */ + vector : 8, /* 16 - 23 */ + __res2 : 40; /* 24 - 63 */ + }; + + /* Remapped mode */ + struct { + __u64 r_present : 1, /* 0 */ + r_fpd : 1, /* 1 */ + dst_mode : 1, /* 2 */ + redir_hint : 1, /* 3 */ + trigger_mode : 1, /* 4 */ + dlvry_mode : 3, /* 5 - 7 */ + r_avail : 4, /* 8 - 11 */ + r_res0 : 4, /* 12 - 15 */ + r_vector : 8, /* 16 - 23 */ + r_res1 : 8, /* 24 - 31 */ + dest_id : 32; /* 32 - 63 */ + }; + + /* Posted mode */ + struct { + __u64 p_present : 1, /* 0 */ + p_fpd : 1, /* 1 */ + p_res0 : 6, /* 2 - 7 */ + p_avail : 4, /* 8 - 11 */ + p_res1 : 2, /* 12 - 13 */ + p_urgent : 1, /* 14 */ + p_pst : 1, /* 15 */ + p_vector : 8, /* 16 - 23 */ + p_res2 : 14, /* 24 - 37 */ + pda_l : 26; /* 38 - 63 */ }; __u64 low; }; union { + /* Shared between remapped and posted mode*/ struct { - __u64 sid : 16, - sq : 2, - svt : 2, - __reserved_3 : 44; + __u64 sid : 16, /* 64 - 79 */ + sq : 2, /* 80 - 81 */ + svt : 2, /* 82 - 83 */ + __res3 : 44; /* 84 - 127 */ + }; + + /* Posted mode*/ + struct { + __u64 p_sid : 16, /* 64 - 79 */ + p_sq : 2, /* 80 - 81 */ + p_svt : 2, /* 82 - 83 */ + p_res3 : 12, /* 84 - 95 */ + pda_h : 32; /* 96 - 127 */ }; __u64 high; }; }; +static inline void dmar_copy_shared_irte(struct irte *dst, struct irte *src) +{ + dst->present = src->present; + dst->fpd = src->fpd; + dst->avail = src->avail; + dst->pst = src->pst; + dst->vector = src->vector; + dst->sid = src->sid; + dst->sq = src->sq; + dst->svt = src->svt; +} + +#define PDA_LOW_BIT 26 +#define PDA_HIGH_BIT 32 + enum { IRQ_REMAP_XAPIC_MODE, IRQ_REMAP_X2APIC_MODE, @@ -227,6 +279,7 @@ extern void dmar_msi_read(int irq, struct msi_msg *msg); extern void dmar_msi_write(int irq, struct msi_msg *msg); extern int dmar_set_interrupt(struct intel_iommu *iommu); extern irqreturn_t dmar_fault(int irq, void *dev_id); -extern int arch_setup_dmar_msi(unsigned int irq); +extern int dmar_alloc_hwirq(int id, int node, void *arg); +extern void dmar_free_hwirq(int irq); #endif /* __DMAR_H__ */ diff --git a/include/linux/efi.h b/include/linux/efi.h index af5be0368dec..2092965afca3 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -583,6 +583,9 @@ void efi_native_runtime_setup(void); #define EFI_FILE_INFO_ID \ EFI_GUID( 0x9576e92, 0x6d3f, 0x11d2, 0x8e, 0x39, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b ) +#define EFI_SYSTEM_RESOURCE_TABLE_GUID \ + EFI_GUID( 0xb122a263, 0x3661, 0x4f68, 0x99, 0x29, 0x78, 0xf8, 0xb0, 0xd6, 0x21, 0x80 ) + #define EFI_FILE_SYSTEM_GUID \ EFI_GUID( 0x964e5b22, 0x6459, 0x11d2, 0x8e, 0x39, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b ) @@ -823,6 +826,7 @@ extern struct efi { unsigned long fw_vendor; /* fw_vendor */ unsigned long runtime; /* runtime table */ unsigned long config_table; /* config tables */ + unsigned long esrt; /* ESRT table */ efi_get_time_t *get_time; efi_set_time_t *set_time; efi_get_wakeup_time_t *get_wakeup_time; @@ -875,6 +879,11 @@ static inline efi_status_t efi_query_variable_store(u32 attributes, unsigned lon #endif extern void __iomem *efi_lookup_mapped_addr(u64 phys_addr); extern int efi_config_init(efi_config_table_type_t *arch_tables); +#ifdef CONFIG_EFI_ESRT +extern void __init efi_esrt_init(void); +#else +static inline void efi_esrt_init(void) { } +#endif extern int efi_config_parse_tables(void *config_tables, int count, int sz, efi_config_table_type_t *arch_tables); extern u64 efi_get_iobase (void); @@ -882,12 +891,15 @@ extern u32 efi_mem_type (unsigned long phys_addr); extern u64 efi_mem_attributes (unsigned long phys_addr); extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); extern int __init efi_uart_console_only (void); +extern u64 efi_mem_desc_end(efi_memory_desc_t *md); +extern int efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); extern void efi_get_time(struct timespec *now); extern void efi_reserve_boot_services(void); extern int efi_get_fdt_params(struct efi_fdt_params *params, int verbose); extern struct efi_memory_map memmap; +extern struct kobject *efi_kobj; extern int efi_reboot_quirk_mode; extern bool efi_poweroff_required(void); diff --git a/include/linux/fs.h b/include/linux/fs.h index 35ec87e490b1..b577e801b4af 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -38,7 +38,6 @@ struct backing_dev_info; struct export_operations; struct hd_geometry; struct iovec; -struct nameidata; struct kiocb; struct kobject; struct pipe_inode_info; @@ -656,6 +655,7 @@ struct inode { struct pipe_inode_info *i_pipe; struct block_device *i_bdev; struct cdev *i_cdev; + char *i_link; }; __u32 i_generation; @@ -1607,12 +1607,12 @@ struct file_operations { struct inode_operations { struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int); - void * (*follow_link) (struct dentry *, struct nameidata *); + const char * (*follow_link) (struct dentry *, void **); int (*permission) (struct inode *, int); struct posix_acl * (*get_acl)(struct inode *, int); int (*readlink) (struct dentry *, char __user *,int); - void (*put_link) (struct dentry *, struct nameidata *, void *); + void (*put_link) (struct inode *, void *); int (*create) (struct inode *,struct dentry *, umode_t, bool); int (*link) (struct dentry *,struct inode *,struct dentry *); @@ -1879,6 +1879,7 @@ enum file_time_flags { S_VERSION = 8, }; +extern bool atime_needs_update(const struct path *, struct inode *); extern void touch_atime(const struct path *); static inline void file_accessed(struct file *file) { @@ -2704,13 +2705,14 @@ extern const struct file_operations generic_ro_fops; extern int readlink_copy(char __user *, int, const char *); extern int page_readlink(struct dentry *, char __user *, int); -extern void *page_follow_link_light(struct dentry *, struct nameidata *); -extern void page_put_link(struct dentry *, struct nameidata *, void *); +extern const char *page_follow_link_light(struct dentry *, void **); +extern void page_put_link(struct inode *, void *); extern int __page_symlink(struct inode *inode, const char *symname, int len, int nofs); extern int page_symlink(struct inode *inode, const char *symname, int len); extern const struct inode_operations page_symlink_inode_operations; -extern void kfree_put_link(struct dentry *, struct nameidata *, void *); +extern void kfree_put_link(struct inode *, void *); +extern void free_page_put_link(struct inode *, void *); extern int generic_readlink(struct dentry *, char __user *, int); extern void generic_fillattr(struct inode *, struct kstat *); int vfs_getattr_nosec(struct path *path, struct kstat *stat); @@ -2721,6 +2723,8 @@ void __inode_sub_bytes(struct inode *inode, loff_t bytes); void inode_sub_bytes(struct inode *inode, loff_t bytes); loff_t inode_get_bytes(struct inode *inode); void inode_set_bytes(struct inode *inode, loff_t bytes); +const char *simple_follow_link(struct dentry *, void **); +extern const struct inode_operations simple_symlink_inode_operations; extern int iterate_dir(struct file *, struct dir_context *); diff --git a/include/linux/gpio.h b/include/linux/gpio.h index ab81339a8590..d12b5d566e4b 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -196,13 +196,6 @@ static inline int gpio_export_link(struct device *dev, const char *name, return -EINVAL; } -static inline int gpio_sysfs_set_active_low(unsigned gpio, int value) -{ - /* GPIO can never have been requested */ - WARN_ON(1); - return -EINVAL; -} - static inline void gpio_unexport(unsigned gpio) { /* GPIO can never have been exported */ diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h index 3a7c9ffd5ab9..fd098169fe87 100644 --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h @@ -100,24 +100,25 @@ int gpiod_direction_output_raw(struct gpio_desc *desc, int value); /* Value get/set from non-sleeping context */ int gpiod_get_value(const struct gpio_desc *desc); void gpiod_set_value(struct gpio_desc *desc, int value); -void gpiod_set_array(unsigned int array_size, - struct gpio_desc **desc_array, int *value_array); +void gpiod_set_array_value(unsigned int array_size, + struct gpio_desc **desc_array, int *value_array); int gpiod_get_raw_value(const struct gpio_desc *desc); void gpiod_set_raw_value(struct gpio_desc *desc, int value); -void gpiod_set_raw_array(unsigned int array_size, - struct gpio_desc **desc_array, int *value_array); +void gpiod_set_raw_array_value(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array); /* Value get/set from sleeping context */ int gpiod_get_value_cansleep(const struct gpio_desc *desc); void gpiod_set_value_cansleep(struct gpio_desc *desc, int value); -void gpiod_set_array_cansleep(unsigned int array_size, - struct gpio_desc **desc_array, - int *value_array); +void gpiod_set_array_value_cansleep(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array); int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc); void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value); -void gpiod_set_raw_array_cansleep(unsigned int array_size, - struct gpio_desc **desc_array, - int *value_array); +void gpiod_set_raw_array_value_cansleep(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array); int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce); @@ -304,9 +305,9 @@ static inline void gpiod_set_value(struct gpio_desc *desc, int value) /* GPIO can never have been requested */ WARN_ON(1); } -static inline void gpiod_set_array(unsigned int array_size, - struct gpio_desc **desc_array, - int *value_array) +static inline void gpiod_set_array_value(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array) { /* GPIO can never have been requested */ WARN_ON(1); @@ -322,9 +323,9 @@ static inline void gpiod_set_raw_value(struct gpio_desc *desc, int value) /* GPIO can never have been requested */ WARN_ON(1); } -static inline void gpiod_set_raw_array(unsigned int array_size, - struct gpio_desc **desc_array, - int *value_array) +static inline void gpiod_set_raw_array_value(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array) { /* GPIO can never have been requested */ WARN_ON(1); @@ -341,7 +342,7 @@ static inline void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) /* GPIO can never have been requested */ WARN_ON(1); } -static inline void gpiod_set_array_cansleep(unsigned int array_size, +static inline void gpiod_set_array_value_cansleep(unsigned int array_size, struct gpio_desc **desc_array, int *value_array) { @@ -360,7 +361,7 @@ static inline void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, /* GPIO can never have been requested */ WARN_ON(1); } -static inline void gpiod_set_raw_array_cansleep(unsigned int array_size, +static inline void gpiod_set_raw_array_value_cansleep(unsigned int array_size, struct gpio_desc **desc_array, int *value_array) { @@ -449,7 +450,6 @@ static inline int desc_to_gpio(const struct gpio_desc *desc) int gpiod_export(struct gpio_desc *desc, bool direction_may_change); int gpiod_export_link(struct device *dev, const char *name, struct gpio_desc *desc); -int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value); void gpiod_unexport(struct gpio_desc *desc); #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ @@ -466,11 +466,6 @@ static inline int gpiod_export_link(struct device *dev, const char *name, return -ENOSYS; } -static inline int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value) -{ - return -ENOSYS; -} - static inline void gpiod_unexport(struct gpio_desc *desc) { } diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index f1b36593ec9f..cc7ec129b329 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -20,6 +20,7 @@ struct seq_file; * struct gpio_chip - abstract a GPIO controller * @label: for diagnostics * @dev: optional device providing the GPIOs + * @cdev: class device used by sysfs interface (may be NULL) * @owner: helps prevent removal of modules exporting active GPIOs * @list: links gpio_chips together for traversal * @request: optional hook for chip-specific activation, such as @@ -41,8 +42,12 @@ struct seq_file; * @dbg_show: optional routine to show contents in debugfs; default code * will be used when this is omitted, but custom code can show extra * state (such as pullup/pulldown configuration). - * @base: identifies the first GPIO number handled by this chip; or, if - * negative during registration, requests dynamic ID allocation. + * @base: identifies the first GPIO number handled by this chip; + * or, if negative during registration, requests dynamic ID allocation. + * DEPRECATION: providing anything non-negative and nailing the base + * base offset of GPIO chips is deprecated. Please pass -1 as base to + * let gpiolib select the chip base in all possible cases. We want to + * get rid of the static GPIO number space in the long run. * @ngpio: the number of GPIOs handled by this controller; the last GPIO * handled is (base + ngpio - 1). * @desc: array of ngpio descriptors. Private. @@ -57,7 +62,6 @@ struct seq_file; * implies that if the chip supports IRQs, these IRQs need to be threaded * as the chip access may sleep when e.g. reading out the IRQ status * registers. - * @exported: flags if the gpiochip is exported for use from sysfs. Private. * @irq_not_threaded: flag must be set if @can_sleep is set but the * IRQs don't need to be threaded * @@ -74,6 +78,7 @@ struct seq_file; struct gpio_chip { const char *label; struct device *dev; + struct device *cdev; struct module *owner; struct list_head list; @@ -109,7 +114,6 @@ struct gpio_chip { const char *const *names; bool can_sleep; bool irq_not_threaded; - bool exported; #ifdef CONFIG_GPIOLIB_IRQCHIP /* @@ -121,6 +125,7 @@ struct gpio_chip { unsigned int irq_base; irq_flow_handler_t irq_handler; unsigned int irq_default_type; + int irq_parent; #endif #if defined(CONFIG_OF_GPIO) diff --git a/include/linux/hid.h b/include/linux/hid.h index 176b43670e5d..f17980de2662 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -815,6 +815,8 @@ void hid_disconnect(struct hid_device *hid); const struct hid_device_id *hid_match_id(struct hid_device *hdev, const struct hid_device_id *id); s32 hid_snto32(__u32 value, unsigned n); +__u32 hid_field_extract(const struct hid_device *hid, __u8 *report, + unsigned offset, unsigned n); /** * hid_device_io_start - enable HID input during probe, remove diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 05f6df1fdf5b..76dd4f0da5ca 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -53,34 +53,25 @@ enum hrtimer_restart { * * 0x00 inactive * 0x01 enqueued into rbtree - * 0x02 callback function running - * 0x04 timer is migrated to another cpu * - * Special cases: - * 0x03 callback function running and enqueued - * (was requeued on another CPU) - * 0x05 timer was migrated on CPU hotunplug + * The callback state is not part of the timer->state because clearing it would + * mean touching the timer after the callback, this makes it impossible to free + * the timer from the callback function. * - * The "callback function running and enqueued" status is only possible on - * SMP. It happens for example when a posix timer expired and the callback + * Therefore we track the callback state in: + * + * timer->base->cpu_base->running == timer + * + * On SMP it is possible to have a "callback function running and enqueued" + * status. It happens for example when a posix timer expired and the callback * queued a signal. Between dropping the lock which protects the posix timer * and reacquiring the base lock of the hrtimer, another CPU can deliver the - * signal and rearm the timer. We have to preserve the callback running state, - * as otherwise the timer could be removed before the softirq code finishes the - * the handling of the timer. - * - * The HRTIMER_STATE_ENQUEUED bit is always or'ed to the current state - * to preserve the HRTIMER_STATE_CALLBACK in the above scenario. This - * also affects HRTIMER_STATE_MIGRATE where the preservation is not - * necessary. HRTIMER_STATE_MIGRATE is cleared after the timer is - * enqueued on the new cpu. + * signal and rearm the timer. * * All state transitions are protected by cpu_base->lock. */ #define HRTIMER_STATE_INACTIVE 0x00 #define HRTIMER_STATE_ENQUEUED 0x01 -#define HRTIMER_STATE_CALLBACK 0x02 -#define HRTIMER_STATE_MIGRATE 0x04 /** * struct hrtimer - the basic hrtimer structure @@ -130,6 +121,12 @@ struct hrtimer_sleeper { struct task_struct *task; }; +#ifdef CONFIG_64BIT +# define HRTIMER_CLOCK_BASE_ALIGN 64 +#else +# define HRTIMER_CLOCK_BASE_ALIGN 32 +#endif + /** * struct hrtimer_clock_base - the timer base for a specific clock * @cpu_base: per cpu clock base @@ -137,9 +134,7 @@ struct hrtimer_sleeper { * timer to a base on another cpu. * @clockid: clock id for per_cpu support * @active: red black tree root node for the active timers - * @resolution: the resolution of the clock, in nanoseconds * @get_time: function to retrieve the current time of the clock - * @softirq_time: the time when running the hrtimer queue in the softirq * @offset: offset of this clock to the monotonic base */ struct hrtimer_clock_base { @@ -147,11 +142,9 @@ struct hrtimer_clock_base { int index; clockid_t clockid; struct timerqueue_head active; - ktime_t resolution; ktime_t (*get_time)(void); - ktime_t softirq_time; ktime_t offset; -}; +} __attribute__((__aligned__(HRTIMER_CLOCK_BASE_ALIGN))); enum hrtimer_base_type { HRTIMER_BASE_MONOTONIC, @@ -165,11 +158,16 @@ enum hrtimer_base_type { * struct hrtimer_cpu_base - the per cpu clock bases * @lock: lock protecting the base and associated clock bases * and timers + * @seq: seqcount around __run_hrtimer + * @running: pointer to the currently running hrtimer * @cpu: cpu number * @active_bases: Bitfield to mark bases with active timers - * @clock_was_set: Indicates that clock was set from irq context. + * @clock_was_set_seq: Sequence counter of clock was set events + * @migration_enabled: The migration of hrtimers to other cpus is enabled + * @nohz_active: The nohz functionality is enabled * @expires_next: absolute time of the next event which was scheduled * via clock_set_next_event() + * @next_timer: Pointer to the first expiring timer * @in_hrtirq: hrtimer_interrupt() is currently executing * @hres_active: State of high resolution mode * @hang_detected: The last hrtimer interrupt detected a hang @@ -178,27 +176,38 @@ enum hrtimer_base_type { * @nr_hangs: Total number of hrtimer interrupt hangs * @max_hang_time: Maximum time spent in hrtimer_interrupt * @clock_base: array of clock bases for this cpu + * + * Note: next_timer is just an optimization for __remove_hrtimer(). + * Do not dereference the pointer because it is not reliable on + * cross cpu removals. */ struct hrtimer_cpu_base { raw_spinlock_t lock; + seqcount_t seq; + struct hrtimer *running; unsigned int cpu; unsigned int active_bases; - unsigned int clock_was_set; + unsigned int clock_was_set_seq; + bool migration_enabled; + bool nohz_active; #ifdef CONFIG_HIGH_RES_TIMERS + unsigned int in_hrtirq : 1, + hres_active : 1, + hang_detected : 1; ktime_t expires_next; - int in_hrtirq; - int hres_active; - int hang_detected; - unsigned long nr_events; - unsigned long nr_retries; - unsigned long nr_hangs; - ktime_t max_hang_time; + struct hrtimer *next_timer; + unsigned int nr_events; + unsigned int nr_retries; + unsigned int nr_hangs; + unsigned int max_hang_time; #endif struct hrtimer_clock_base clock_base[HRTIMER_MAX_CLOCK_BASES]; -}; +} ____cacheline_aligned; static inline void hrtimer_set_expires(struct hrtimer *timer, ktime_t time) { + BUILD_BUG_ON(sizeof(struct hrtimer_clock_base) > HRTIMER_CLOCK_BASE_ALIGN); + timer->node.expires = time; timer->_softexpires = time; } @@ -262,19 +271,16 @@ static inline ktime_t hrtimer_expires_remaining(const struct hrtimer *timer) return ktime_sub(timer->node.expires, timer->base->get_time()); } -#ifdef CONFIG_HIGH_RES_TIMERS -struct clock_event_device; - -extern void hrtimer_interrupt(struct clock_event_device *dev); - -/* - * In high resolution mode the time reference must be read accurate - */ static inline ktime_t hrtimer_cb_get_time(struct hrtimer *timer) { return timer->base->get_time(); } +#ifdef CONFIG_HIGH_RES_TIMERS +struct clock_event_device; + +extern void hrtimer_interrupt(struct clock_event_device *dev); + static inline int hrtimer_is_hres_active(struct hrtimer *timer) { return timer->base->cpu_base->hres_active; @@ -295,21 +301,16 @@ extern void hrtimer_peek_ahead_timers(void); extern void clock_was_set_delayed(void); +extern unsigned int hrtimer_resolution; + #else # define MONOTONIC_RES_NSEC LOW_RES_NSEC # define KTIME_MONOTONIC_RES KTIME_LOW_RES -static inline void hrtimer_peek_ahead_timers(void) { } +#define hrtimer_resolution (unsigned int)LOW_RES_NSEC -/* - * In non high resolution mode the time reference is taken from - * the base softirq time variable. - */ -static inline ktime_t hrtimer_cb_get_time(struct hrtimer *timer) -{ - return timer->base->softirq_time; -} +static inline void hrtimer_peek_ahead_timers(void) { } static inline int hrtimer_is_hres_active(struct hrtimer *timer) { @@ -353,49 +354,47 @@ static inline void destroy_hrtimer_on_stack(struct hrtimer *timer) { } #endif /* Basic timer operations: */ -extern int hrtimer_start(struct hrtimer *timer, ktime_t tim, - const enum hrtimer_mode mode); -extern int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, +extern void hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, unsigned long range_ns, const enum hrtimer_mode mode); -extern int -__hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, - unsigned long delta_ns, - const enum hrtimer_mode mode, int wakeup); + +/** + * hrtimer_start - (re)start an hrtimer on the current CPU + * @timer: the timer to be added + * @tim: expiry time + * @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or + * relative (HRTIMER_MODE_REL) + */ +static inline void hrtimer_start(struct hrtimer *timer, ktime_t tim, + const enum hrtimer_mode mode) +{ + hrtimer_start_range_ns(timer, tim, 0, mode); +} extern int hrtimer_cancel(struct hrtimer *timer); extern int hrtimer_try_to_cancel(struct hrtimer *timer); -static inline int hrtimer_start_expires(struct hrtimer *timer, - enum hrtimer_mode mode) +static inline void hrtimer_start_expires(struct hrtimer *timer, + enum hrtimer_mode mode) { unsigned long delta; ktime_t soft, hard; soft = hrtimer_get_softexpires(timer); hard = hrtimer_get_expires(timer); delta = ktime_to_ns(ktime_sub(hard, soft)); - return hrtimer_start_range_ns(timer, soft, delta, mode); + hrtimer_start_range_ns(timer, soft, delta, mode); } -static inline int hrtimer_restart(struct hrtimer *timer) +static inline void hrtimer_restart(struct hrtimer *timer) { - return hrtimer_start_expires(timer, HRTIMER_MODE_ABS); + hrtimer_start_expires(timer, HRTIMER_MODE_ABS); } /* Query timers: */ extern ktime_t hrtimer_get_remaining(const struct hrtimer *timer); -extern int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp); -extern ktime_t hrtimer_get_next_event(void); +extern u64 hrtimer_get_next_event(void); -/* - * A timer is active, when it is enqueued into the rbtree or the - * callback function is running or it's in the state of being migrated - * to another cpu. - */ -static inline int hrtimer_active(const struct hrtimer *timer) -{ - return timer->state != HRTIMER_STATE_INACTIVE; -} +extern bool hrtimer_active(const struct hrtimer *timer); /* * Helper function to check, whether the timer is on one of the queues @@ -411,14 +410,29 @@ static inline int hrtimer_is_queued(struct hrtimer *timer) */ static inline int hrtimer_callback_running(struct hrtimer *timer) { - return timer->state & HRTIMER_STATE_CALLBACK; + return timer->base->cpu_base->running == timer; } /* Forward a hrtimer so it expires after now: */ extern u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval); -/* Forward a hrtimer so it expires after the hrtimer's current now */ +/** + * hrtimer_forward_now - forward the timer expiry so it expires after now + * @timer: hrtimer to forward + * @interval: the interval to forward + * + * Forward the timer expiry so it will expire after the current time + * of the hrtimer clock base. Returns the number of overruns. + * + * Can be safely called from the callback function of @timer. If + * called from other contexts @timer must neither be enqueued nor + * running the callback and the caller needs to take care of + * serialization. + * + * Note: This only updates the timer expiry value and does not requeue + * the timer. + */ static inline u64 hrtimer_forward_now(struct hrtimer *timer, ktime_t interval) { @@ -443,7 +457,6 @@ extern int schedule_hrtimeout(ktime_t *expires, const enum hrtimer_mode mode); /* Soft interrupt function to run the hrtimer queues: */ extern void hrtimer_run_queues(void); -extern void hrtimer_run_pending(void); /* Bootup initialization: */ extern void __init hrtimers_init(void); diff --git a/include/linux/htirq.h b/include/linux/htirq.h index 70a1dbbf2093..d4a527e58434 100644 --- a/include/linux/htirq.h +++ b/include/linux/htirq.h @@ -1,24 +1,38 @@ #ifndef LINUX_HTIRQ_H #define LINUX_HTIRQ_H +struct pci_dev; +struct irq_data; + struct ht_irq_msg { u32 address_lo; /* low 32 bits of the ht irq message */ u32 address_hi; /* high 32 bits of the it irq message */ }; +typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq, + struct ht_irq_msg *msg); + +struct ht_irq_cfg { + struct pci_dev *dev; + /* Update callback used to cope with buggy hardware */ + ht_irq_update_t *update; + unsigned pos; + unsigned idx; + struct ht_irq_msg msg; +}; + /* Helper functions.. */ void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg); void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg); -struct irq_data; void mask_ht_irq(struct irq_data *data); void unmask_ht_irq(struct irq_data *data); /* The arch hook for getting things started */ -int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev); +int arch_setup_ht_irq(int idx, int pos, struct pci_dev *dev, + ht_irq_update_t *update); +void arch_teardown_ht_irq(unsigned int irq); /* For drivers of buggy hardware */ -typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq, - struct ht_irq_msg *msg); int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update); #endif /* LINUX_HTIRQ_H */ diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 0bc03f100d04..9ad7828d9d34 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -675,6 +675,7 @@ struct twl4030_power_data { struct twl4030_resconfig *board_config; #define TWL4030_RESCONFIG_UNDEF ((u8)-1) bool use_poweroff; /* Board is wired for TWL poweroff */ + bool ac_charger_quirk; /* Disable AC charger on board */ }; extern int twl4030_remove_script(u8 flags); diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 796ef9645827..d9a366d24e3b 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -87,6 +87,7 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) /* * Decoding Capability Register */ +#define cap_pi_support(c) (((c) >> 59) & 1) #define cap_read_drain(c) (((c) >> 55) & 1) #define cap_write_drain(c) (((c) >> 54) & 1) #define cap_max_amask_val(c) (((c) >> 48) & 0x3f) @@ -115,13 +116,14 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) * Extended Capability Register */ +#define ecap_pasid(e) ((e >> 40) & 0x1) #define ecap_pss(e) ((e >> 35) & 0x1f) #define ecap_eafs(e) ((e >> 34) & 0x1) #define ecap_nwfs(e) ((e >> 33) & 0x1) #define ecap_srs(e) ((e >> 31) & 0x1) #define ecap_ers(e) ((e >> 30) & 0x1) #define ecap_prs(e) ((e >> 29) & 0x1) -#define ecap_pasid(e) ((e >> 28) & 0x1) +/* PASID support used to be on bit 28 */ #define ecap_dis(e) ((e >> 27) & 0x1) #define ecap_nest(e) ((e >> 26) & 0x1) #define ecap_mts(e) ((e >> 25) & 0x1) @@ -295,9 +297,12 @@ struct q_inval { /* 1MB - maximum possible interrupt remapping table size */ #define INTR_REMAP_PAGE_ORDER 8 #define INTR_REMAP_TABLE_REG_SIZE 0xf +#define INTR_REMAP_TABLE_REG_SIZE_MASK 0xf #define INTR_REMAP_TABLE_ENTRIES 65536 +struct irq_domain; + struct ir_table { struct irte *base; unsigned long *bitmap; @@ -319,6 +324,9 @@ enum { MAX_SR_DMAR_REGS }; +#define VTD_FLAG_TRANS_PRE_ENABLED (1 << 0) +#define VTD_FLAG_IRQ_REMAP_PRE_ENABLED (1 << 1) + struct intel_iommu { void __iomem *reg; /* Pointer to hardware regs, virtual addr */ u64 reg_phys; /* physical address of hw register set */ @@ -347,9 +355,12 @@ struct intel_iommu { #ifdef CONFIG_IRQ_REMAP struct ir_table *ir_table; /* Interrupt remapping info */ + struct irq_domain *ir_domain; + struct irq_domain *ir_msi_domain; #endif struct device *iommu_dev; /* IOMMU-sysfs device */ int node; + u32 flags; /* Software defined flags */ }; static inline void __iommu_flush_cache( diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 950ae4501826..be7e75c945e9 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -413,7 +413,8 @@ enum BLOCK_IOPOLL_SOFTIRQ, TASKLET_SOFTIRQ, SCHED_SOFTIRQ, - HRTIMER_SOFTIRQ, + HRTIMER_SOFTIRQ, /* Unused, but kept as tools rely on the + numbering. Sigh! */ RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */ NR_SOFTIRQS @@ -592,10 +593,10 @@ tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer, clockid_t which_clock, enum hrtimer_mode mode); static inline -int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time, - const enum hrtimer_mode mode) +void tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time, + const enum hrtimer_mode mode) { - return hrtimer_start(&ttimer->timer, time, mode); + hrtimer_start(&ttimer->timer, time, mode); } static inline diff --git a/include/linux/io.h b/include/linux/io.h index 986f2bffea1e..fb5a99800e77 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -19,6 +19,7 @@ #define _LINUX_IO_H #include <linux/types.h> +#include <linux/init.h> #include <asm/io.h> #include <asm/page.h> @@ -111,6 +112,13 @@ static inline void arch_phys_wc_del(int handle) } #define arch_phys_wc_add arch_phys_wc_add +#ifndef arch_phys_wc_index +static inline int arch_phys_wc_index(int handle) +{ + return -1; +} +#define arch_phys_wc_index arch_phys_wc_index +#endif #endif #endif /* _LINUX_IO_H */ diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 0546b8710ce3..dc767f7c3704 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -114,6 +114,20 @@ enum iommu_attr { DOMAIN_ATTR_MAX, }; +/** + * struct iommu_dm_region - descriptor for a direct mapped memory region + * @list: Linked list pointers + * @start: System physical start address of the region + * @length: Length of the region in bytes + * @prot: IOMMU Protection flags (READ/WRITE/...) + */ +struct iommu_dm_region { + struct list_head list; + phys_addr_t start; + size_t length; + int prot; +}; + #ifdef CONFIG_IOMMU_API /** @@ -159,6 +173,10 @@ struct iommu_ops { int (*domain_set_attr)(struct iommu_domain *domain, enum iommu_attr attr, void *data); + /* Request/Free a list of direct mapping requirements for a device */ + void (*get_dm_regions)(struct device *dev, struct list_head *list); + void (*put_dm_regions)(struct device *dev, struct list_head *list); + /* Window handling functions */ int (*domain_window_enable)(struct iommu_domain *domain, u32 wnd_nr, phys_addr_t paddr, u64 size, int prot); @@ -193,6 +211,7 @@ extern int iommu_attach_device(struct iommu_domain *domain, struct device *dev); extern void iommu_detach_device(struct iommu_domain *domain, struct device *dev); +extern struct iommu_domain *iommu_get_domain_for_dev(struct device *dev); extern int iommu_map(struct iommu_domain *domain, unsigned long iova, phys_addr_t paddr, size_t size, int prot); extern size_t iommu_unmap(struct iommu_domain *domain, unsigned long iova, @@ -204,6 +223,10 @@ extern phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain, dma_addr_t io extern void iommu_set_fault_handler(struct iommu_domain *domain, iommu_fault_handler_t handler, void *token); +extern void iommu_get_dm_regions(struct device *dev, struct list_head *list); +extern void iommu_put_dm_regions(struct device *dev, struct list_head *list); +extern int iommu_request_dm_for_dev(struct device *dev); + extern int iommu_attach_group(struct iommu_domain *domain, struct iommu_group *group); extern void iommu_detach_group(struct iommu_domain *domain, @@ -227,6 +250,7 @@ extern int iommu_group_unregister_notifier(struct iommu_group *group, struct notifier_block *nb); extern int iommu_group_id(struct iommu_group *group); extern struct iommu_group *iommu_group_get_for_dev(struct device *dev); +extern struct iommu_domain *iommu_group_default_domain(struct iommu_group *); extern int iommu_domain_get_attr(struct iommu_domain *domain, enum iommu_attr, void *data); @@ -332,6 +356,11 @@ static inline void iommu_detach_device(struct iommu_domain *domain, { } +static inline struct iommu_domain *iommu_get_domain_for_dev(struct device *dev) +{ + return NULL; +} + static inline int iommu_map(struct iommu_domain *domain, unsigned long iova, phys_addr_t paddr, int gfp_order, int prot) { @@ -373,6 +402,21 @@ static inline void iommu_set_fault_handler(struct iommu_domain *domain, { } +static inline void iommu_get_dm_regions(struct device *dev, + struct list_head *list) +{ +} + +static inline void iommu_put_dm_regions(struct device *dev, + struct list_head *list) +{ +} + +static inline int iommu_request_dm_for_dev(struct device *dev) +{ + return -ENODEV; +} + static inline int iommu_attach_group(struct iommu_domain *domain, struct iommu_group *group) { diff --git a/include/linux/irq.h b/include/linux/irq.h index 62c6901cab55..812149160d3b 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -126,13 +126,21 @@ struct msi_desc; struct irq_domain; /** - * struct irq_data - per irq and irq chip data passed down to chip functions + * struct irq_common_data - per irq data shared by all irqchips + * @state_use_accessors: status information for irq chip functions. + * Use accessor functions to deal with it + */ +struct irq_common_data { + unsigned int state_use_accessors; +}; + +/** + * struct irq_data - per irq chip data passed down to chip functions * @mask: precomputed bitmask for accessing the chip registers * @irq: interrupt number * @hwirq: hardware interrupt number, local to the interrupt domain * @node: node index useful for balancing - * @state_use_accessors: status information for irq chip functions. - * Use accessor functions to deal with it + * @common: point to data shared by all irqchips * @chip: low level interrupt hardware access * @domain: Interrupt translation domain; responsible for mapping * between hwirq number and linux irq number. @@ -153,7 +161,7 @@ struct irq_data { unsigned int irq; unsigned long hwirq; unsigned int node; - unsigned int state_use_accessors; + struct irq_common_data *common; struct irq_chip *chip; struct irq_domain *domain; #ifdef CONFIG_IRQ_DOMAIN_HIERARCHY @@ -166,7 +174,7 @@ struct irq_data { }; /* - * Bit masks for irq_data.state + * Bit masks for irq_common_data.state_use_accessors * * IRQD_TRIGGER_MASK - Mask for the trigger type bits * IRQD_SETAFFINITY_PENDING - Affinity setting is pending @@ -198,34 +206,36 @@ enum { IRQD_WAKEUP_ARMED = (1 << 19), }; +#define __irqd_to_state(d) ((d)->common->state_use_accessors) + static inline bool irqd_is_setaffinity_pending(struct irq_data *d) { - return d->state_use_accessors & IRQD_SETAFFINITY_PENDING; + return __irqd_to_state(d) & IRQD_SETAFFINITY_PENDING; } static inline bool irqd_is_per_cpu(struct irq_data *d) { - return d->state_use_accessors & IRQD_PER_CPU; + return __irqd_to_state(d) & IRQD_PER_CPU; } static inline bool irqd_can_balance(struct irq_data *d) { - return !(d->state_use_accessors & (IRQD_PER_CPU | IRQD_NO_BALANCING)); + return !(__irqd_to_state(d) & (IRQD_PER_CPU | IRQD_NO_BALANCING)); } static inline bool irqd_affinity_was_set(struct irq_data *d) { - return d->state_use_accessors & IRQD_AFFINITY_SET; + return __irqd_to_state(d) & IRQD_AFFINITY_SET; } static inline void irqd_mark_affinity_was_set(struct irq_data *d) { - d->state_use_accessors |= IRQD_AFFINITY_SET; + __irqd_to_state(d) |= IRQD_AFFINITY_SET; } static inline u32 irqd_get_trigger_type(struct irq_data *d) { - return d->state_use_accessors & IRQD_TRIGGER_MASK; + return __irqd_to_state(d) & IRQD_TRIGGER_MASK; } /* @@ -233,43 +243,43 @@ static inline u32 irqd_get_trigger_type(struct irq_data *d) */ static inline void irqd_set_trigger_type(struct irq_data *d, u32 type) { - d->state_use_accessors &= ~IRQD_TRIGGER_MASK; - d->state_use_accessors |= type & IRQD_TRIGGER_MASK; + __irqd_to_state(d) &= ~IRQD_TRIGGER_MASK; + __irqd_to_state(d) |= type & IRQD_TRIGGER_MASK; } static inline bool irqd_is_level_type(struct irq_data *d) { - return d->state_use_accessors & IRQD_LEVEL; + return __irqd_to_state(d) & IRQD_LEVEL; } static inline bool irqd_is_wakeup_set(struct irq_data *d) { - return d->state_use_accessors & IRQD_WAKEUP_STATE; + return __irqd_to_state(d) & IRQD_WAKEUP_STATE; } static inline bool irqd_can_move_in_process_context(struct irq_data *d) { - return d->state_use_accessors & IRQD_MOVE_PCNTXT; + return __irqd_to_state(d) & IRQD_MOVE_PCNTXT; } static inline bool irqd_irq_disabled(struct irq_data *d) { - return d->state_use_accessors & IRQD_IRQ_DISABLED; + return __irqd_to_state(d) & IRQD_IRQ_DISABLED; } static inline bool irqd_irq_masked(struct irq_data *d) { - return d->state_use_accessors & IRQD_IRQ_MASKED; + return __irqd_to_state(d) & IRQD_IRQ_MASKED; } static inline bool irqd_irq_inprogress(struct irq_data *d) { - return d->state_use_accessors & IRQD_IRQ_INPROGRESS; + return __irqd_to_state(d) & IRQD_IRQ_INPROGRESS; } static inline bool irqd_is_wakeup_armed(struct irq_data *d) { - return d->state_use_accessors & IRQD_WAKEUP_ARMED; + return __irqd_to_state(d) & IRQD_WAKEUP_ARMED; } @@ -280,12 +290,12 @@ static inline bool irqd_is_wakeup_armed(struct irq_data *d) */ static inline void irqd_set_chained_irq_inprogress(struct irq_data *d) { - d->state_use_accessors |= IRQD_IRQ_INPROGRESS; + __irqd_to_state(d) |= IRQD_IRQ_INPROGRESS; } static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d) { - d->state_use_accessors &= ~IRQD_IRQ_INPROGRESS; + __irqd_to_state(d) &= ~IRQD_IRQ_INPROGRESS; } static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d) @@ -327,6 +337,7 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d) * @irq_write_msi_msg: optional to write message content for MSI * @irq_get_irqchip_state: return the internal state of an interrupt * @irq_set_irqchip_state: set the internal state of a interrupt + * @irq_set_vcpu_affinity: optional to target a vCPU in a virtual machine * @flags: chip specific flags */ struct irq_chip { @@ -369,6 +380,8 @@ struct irq_chip { int (*irq_get_irqchip_state)(struct irq_data *data, enum irqchip_irq_state which, bool *state); int (*irq_set_irqchip_state)(struct irq_data *data, enum irqchip_irq_state which, bool state); + int (*irq_set_vcpu_affinity)(struct irq_data *data, void *vcpu_info); + unsigned long flags; }; @@ -422,6 +435,7 @@ extern void irq_cpu_online(void); extern void irq_cpu_offline(void); extern int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *cpumask, bool force); +extern int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info); #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ) void irq_move_irq(struct irq_data *data); @@ -458,6 +472,8 @@ extern void handle_nested_irq(unsigned int irq); extern int irq_chip_compose_msi_msg(struct irq_data *data, struct msi_msg *msg); #ifdef CONFIG_IRQ_DOMAIN_HIERARCHY +extern void irq_chip_enable_parent(struct irq_data *data); +extern void irq_chip_disable_parent(struct irq_data *data); extern void irq_chip_ack_parent(struct irq_data *data); extern int irq_chip_retrigger_hierarchy(struct irq_data *data); extern void irq_chip_mask_parent(struct irq_data *data); @@ -467,6 +483,8 @@ extern int irq_chip_set_affinity_parent(struct irq_data *data, const struct cpumask *dest, bool force); extern int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on); +extern int irq_chip_set_vcpu_affinity_parent(struct irq_data *data, + void *vcpu_info); #endif /* Handling of unhandled and spurious interrupts: */ @@ -517,6 +535,15 @@ irq_set_chained_handler(unsigned int irq, irq_flow_handler_t handle) __irq_set_handler(irq, handle, 1, NULL); } +/* + * Set a highlevel chained flow handler and its data for a given IRQ. + * (a chained handler is automatically enabled and set to + * IRQ_NOREQUEST, IRQ_NOPROBE, and IRQ_NOTHREAD) + */ +void +irq_set_chained_handler_and_data(unsigned int irq, irq_flow_handler_t handle, + void *data); + void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set); static inline void irq_set_status_flags(unsigned int irq, unsigned long set) @@ -624,6 +651,23 @@ static inline u32 irq_get_trigger_type(unsigned int irq) return d ? irqd_get_trigger_type(d) : 0; } +static inline int irq_data_get_node(struct irq_data *d) +{ + return d->node; +} + +static inline struct cpumask *irq_get_affinity_mask(int irq) +{ + struct irq_data *d = irq_get_irq_data(irq); + + return d ? d->affinity : NULL; +} + +static inline struct cpumask *irq_data_get_affinity_mask(struct irq_data *d) +{ + return d->affinity; +} + unsigned int arch_dynirq_lower_bound(unsigned int from); int __irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node, diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index dd1109fb241e..c52d1480f272 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -17,7 +17,7 @@ struct pt_regs; /** * struct irq_desc - interrupt descriptor - * @irq_data: per irq and chip data passed down to chip functions + * @irq_common_data: per irq and chip data passed down to chip functions * @kstat_irqs: irq stats per cpu * @handle_irq: highlevel irq-events handler * @preflow_handler: handler called before the flow handler (currently used by sparc) @@ -47,6 +47,7 @@ struct pt_regs; * @name: flow handler name for /proc/interrupts output */ struct irq_desc { + struct irq_common_data irq_common_data; struct irq_data irq_data; unsigned int __percpu *kstat_irqs; irq_flow_handler_t handle_irq; @@ -93,6 +94,15 @@ struct irq_desc { extern struct irq_desc irq_desc[NR_IRQS]; #endif +static inline struct irq_desc *irq_data_to_desc(struct irq_data *data) +{ +#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY + return irq_to_desc(data->irq); +#else + return container_of(data, struct irq_desc, irq_data); +#endif +} + static inline struct irq_data *irq_desc_get_irq_data(struct irq_desc *desc) { return &desc->irq_data; diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 676d7306a360..744ac0ec98eb 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -258,6 +258,10 @@ int irq_domain_xlate_onetwocell(struct irq_domain *d, struct device_node *ctrlr, /* V2 interfaces to support hierarchy IRQ domains. */ extern struct irq_data *irq_domain_get_irq_data(struct irq_domain *domain, unsigned int virq); +extern void irq_domain_set_info(struct irq_domain *domain, unsigned int virq, + irq_hw_number_t hwirq, struct irq_chip *chip, + void *chip_data, irq_flow_handler_t handler, + void *handler_data, const char *handler_name); #ifdef CONFIG_IRQ_DOMAIN_HIERARCHY extern struct irq_domain *irq_domain_add_hierarchy(struct irq_domain *parent, unsigned int flags, unsigned int size, @@ -281,10 +285,6 @@ extern int irq_domain_set_hwirq_and_chip(struct irq_domain *domain, irq_hw_number_t hwirq, struct irq_chip *chip, void *chip_data); -extern void irq_domain_set_info(struct irq_domain *domain, unsigned int virq, - irq_hw_number_t hwirq, struct irq_chip *chip, - void *chip_data, irq_flow_handler_t handler, - void *handler_data, const char *handler_name); extern void irq_domain_reset_irq_data(struct irq_data *irq_data); extern void irq_domain_free_irqs_common(struct irq_domain *domain, unsigned int virq, diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index c367cbdf73ab..535fd3bb1ba8 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -7,6 +7,7 @@ #include <linux/time.h> #include <linux/timex.h> #include <asm/param.h> /* for HZ */ +#include <generated/timeconst.h> /* * The following defines establish the engineering parameters of the PLL @@ -288,8 +289,133 @@ static inline u64 jiffies_to_nsecs(const unsigned long j) return (u64)jiffies_to_usecs(j) * NSEC_PER_USEC; } -extern unsigned long msecs_to_jiffies(const unsigned int m); -extern unsigned long usecs_to_jiffies(const unsigned int u); +extern unsigned long __msecs_to_jiffies(const unsigned int m); +#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) +/* + * HZ is equal to or smaller than 1000, and 1000 is a nice round + * multiple of HZ, divide with the factor between them, but round + * upwards: + */ +static inline unsigned long _msecs_to_jiffies(const unsigned int m) +{ + return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ); +} +#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) +/* + * HZ is larger than 1000, and HZ is a nice round multiple of 1000 - + * simply multiply with the factor between them. + * + * But first make sure the multiplication result cannot overflow: + */ +static inline unsigned long _msecs_to_jiffies(const unsigned int m) +{ + if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET)) + return MAX_JIFFY_OFFSET; + return m * (HZ / MSEC_PER_SEC); +} +#else +/* + * Generic case - multiply, round and divide. But first check that if + * we are doing a net multiplication, that we wouldn't overflow: + */ +static inline unsigned long _msecs_to_jiffies(const unsigned int m) +{ + if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET)) + return MAX_JIFFY_OFFSET; + + return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32) >> MSEC_TO_HZ_SHR32; +} +#endif +/** + * msecs_to_jiffies: - convert milliseconds to jiffies + * @m: time in milliseconds + * + * conversion is done as follows: + * + * - negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET) + * + * - 'too large' values [that would result in larger than + * MAX_JIFFY_OFFSET values] mean 'infinite timeout' too. + * + * - all other values are converted to jiffies by either multiplying + * the input value by a factor or dividing it with a factor and + * handling any 32-bit overflows. + * for the details see __msecs_to_jiffies() + * + * msecs_to_jiffies() checks for the passed in value being a constant + * via __builtin_constant_p() allowing gcc to eliminate most of the + * code, __msecs_to_jiffies() is called if the value passed does not + * allow constant folding and the actual conversion must be done at + * runtime. + * the HZ range specific helpers _msecs_to_jiffies() are called both + * directly here and from __msecs_to_jiffies() in the case where + * constant folding is not possible. + */ +static inline unsigned long msecs_to_jiffies(const unsigned int m) +{ + if (__builtin_constant_p(m)) { + if ((int)m < 0) + return MAX_JIFFY_OFFSET; + return _msecs_to_jiffies(m); + } else { + return __msecs_to_jiffies(m); + } +} + +extern unsigned long __usecs_to_jiffies(const unsigned int u); +#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ) +static inline unsigned long _usecs_to_jiffies(const unsigned int u) +{ + return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ); +} +#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC) +static inline unsigned long _usecs_to_jiffies(const unsigned int u) +{ + return u * (HZ / USEC_PER_SEC); +} +static inline unsigned long _usecs_to_jiffies(const unsigned int u) +{ +#else +static inline unsigned long _usecs_to_jiffies(const unsigned int u) +{ + return (USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32) + >> USEC_TO_HZ_SHR32; +} +#endif + +/** + * usecs_to_jiffies: - convert microseconds to jiffies + * @u: time in microseconds + * + * conversion is done as follows: + * + * - 'too large' values [that would result in larger than + * MAX_JIFFY_OFFSET values] mean 'infinite timeout' too. + * + * - all other values are converted to jiffies by either multiplying + * the input value by a factor or dividing it with a factor and + * handling any 32-bit overflows as for msecs_to_jiffies. + * + * usecs_to_jiffies() checks for the passed in value being a constant + * via __builtin_constant_p() allowing gcc to eliminate most of the + * code, __usecs_to_jiffies() is called if the value passed does not + * allow constant folding and the actual conversion must be done at + * runtime. + * the HZ range specific helpers _usecs_to_jiffies() are called both + * directly here and from __msecs_to_jiffies() in the case where + * constant folding is not possible. + */ +static inline unsigned long usecs_to_jiffies(const unsigned int u) +{ + if (__builtin_constant_p(u)) { + if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET)) + return MAX_JIFFY_OFFSET; + return _usecs_to_jiffies(u); + } else { + return __usecs_to_jiffies(u); + } +} + extern unsigned long timespec_to_jiffies(const struct timespec *value); extern void jiffies_to_timespec(const unsigned long jiffies, struct timespec *value); diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index ad45054309a0..9564fd78c547 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -44,6 +44,10 @@ /* Two fragments for cross MMIO pages. */ #define KVM_MAX_MMIO_FRAGMENTS 2 +#ifndef KVM_ADDRESS_SPACE_NUM +#define KVM_ADDRESS_SPACE_NUM 1 +#endif + /* * For the normal pfn, the highest 12 bits should be zero, * so we can mask bit 62 ~ bit 52 to indicate the error pfn, @@ -134,6 +138,7 @@ static inline bool is_error_page(struct page *page) #define KVM_REQ_ENABLE_IBS 23 #define KVM_REQ_DISABLE_IBS 24 #define KVM_REQ_APIC_PAGE_RELOAD 25 +#define KVM_REQ_SMI 26 #define KVM_USERSPACE_IRQ_SOURCE_ID 0 #define KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID 1 @@ -230,6 +235,7 @@ struct kvm_vcpu { int fpu_active; int guest_fpu_loaded, guest_xcr0_loaded; + unsigned char fpu_counter; wait_queue_head_t wq; struct pid *pid; int sigset_active; @@ -329,6 +335,13 @@ struct kvm_kernel_irq_routing_entry { #define KVM_MEM_SLOTS_NUM (KVM_USER_MEM_SLOTS + KVM_PRIVATE_MEM_SLOTS) #endif +#ifndef __KVM_VCPU_MULTIPLE_ADDRESS_SPACE +static inline int kvm_arch_vcpu_memslots_id(struct kvm_vcpu *vcpu) +{ + return 0; +} +#endif + /* * Note: * memslots are not sorted by id anymore, please use id_to_memslot() @@ -347,7 +360,7 @@ struct kvm { spinlock_t mmu_lock; struct mutex slots_lock; struct mm_struct *mm; /* userspace tied to this vm */ - struct kvm_memslots *memslots; + struct kvm_memslots *memslots[KVM_ADDRESS_SPACE_NUM]; struct srcu_struct srcu; struct srcu_struct irq_srcu; #ifdef CONFIG_KVM_APIC_ARCHITECTURE @@ -462,13 +475,25 @@ void kvm_exit(void); void kvm_get_kvm(struct kvm *kvm); void kvm_put_kvm(struct kvm *kvm); -static inline struct kvm_memslots *kvm_memslots(struct kvm *kvm) +static inline struct kvm_memslots *__kvm_memslots(struct kvm *kvm, int as_id) { - return rcu_dereference_check(kvm->memslots, + return rcu_dereference_check(kvm->memslots[as_id], srcu_read_lock_held(&kvm->srcu) || lockdep_is_held(&kvm->slots_lock)); } +static inline struct kvm_memslots *kvm_memslots(struct kvm *kvm) +{ + return __kvm_memslots(kvm, 0); +} + +static inline struct kvm_memslots *kvm_vcpu_memslots(struct kvm_vcpu *vcpu) +{ + int as_id = kvm_arch_vcpu_memslots_id(vcpu); + + return __kvm_memslots(vcpu->kvm, as_id); +} + static inline struct kvm_memory_slot * id_to_memslot(struct kvm_memslots *slots, int id) { @@ -500,21 +525,22 @@ enum kvm_mr_change { }; int kvm_set_memory_region(struct kvm *kvm, - struct kvm_userspace_memory_region *mem); + const struct kvm_userspace_memory_region *mem); int __kvm_set_memory_region(struct kvm *kvm, - struct kvm_userspace_memory_region *mem); + const struct kvm_userspace_memory_region *mem); void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free, struct kvm_memory_slot *dont); int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot, unsigned long npages); -void kvm_arch_memslots_updated(struct kvm *kvm); +void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots); int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, - struct kvm_userspace_memory_region *mem, + const struct kvm_userspace_memory_region *mem, enum kvm_mr_change change); void kvm_arch_commit_memory_region(struct kvm *kvm, - struct kvm_userspace_memory_region *mem, + const struct kvm_userspace_memory_region *mem, const struct kvm_memory_slot *old, + const struct kvm_memory_slot *new, enum kvm_mr_change change); bool kvm_largepages_enabled(void); void kvm_disable_largepages(void); @@ -524,8 +550,8 @@ void kvm_arch_flush_shadow_all(struct kvm *kvm); void kvm_arch_flush_shadow_memslot(struct kvm *kvm, struct kvm_memory_slot *slot); -int gfn_to_page_many_atomic(struct kvm *kvm, gfn_t gfn, struct page **pages, - int nr_pages); +int gfn_to_page_many_atomic(struct kvm_memory_slot *slot, gfn_t gfn, + struct page **pages, int nr_pages); struct page *gfn_to_page(struct kvm *kvm, gfn_t gfn); unsigned long gfn_to_hva(struct kvm *kvm, gfn_t gfn); @@ -538,13 +564,13 @@ void kvm_release_page_dirty(struct page *page); void kvm_set_page_accessed(struct page *page); pfn_t gfn_to_pfn_atomic(struct kvm *kvm, gfn_t gfn); -pfn_t gfn_to_pfn_async(struct kvm *kvm, gfn_t gfn, bool *async, - bool write_fault, bool *writable); pfn_t gfn_to_pfn(struct kvm *kvm, gfn_t gfn); pfn_t gfn_to_pfn_prot(struct kvm *kvm, gfn_t gfn, bool write_fault, bool *writable); pfn_t gfn_to_pfn_memslot(struct kvm_memory_slot *slot, gfn_t gfn); pfn_t gfn_to_pfn_memslot_atomic(struct kvm_memory_slot *slot, gfn_t gfn); +pfn_t __gfn_to_pfn_memslot(struct kvm_memory_slot *slot, gfn_t gfn, bool atomic, + bool *async, bool write_fault, bool *writable); void kvm_release_pfn_clean(pfn_t pfn); void kvm_set_pfn_dirty(pfn_t pfn); @@ -573,6 +599,25 @@ int kvm_is_visible_gfn(struct kvm *kvm, gfn_t gfn); unsigned long kvm_host_page_size(struct kvm *kvm, gfn_t gfn); void mark_page_dirty(struct kvm *kvm, gfn_t gfn); +struct kvm_memslots *kvm_vcpu_memslots(struct kvm_vcpu *vcpu); +struct kvm_memory_slot *kvm_vcpu_gfn_to_memslot(struct kvm_vcpu *vcpu, gfn_t gfn); +pfn_t kvm_vcpu_gfn_to_pfn_atomic(struct kvm_vcpu *vcpu, gfn_t gfn); +pfn_t kvm_vcpu_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn); +struct page *kvm_vcpu_gfn_to_page(struct kvm_vcpu *vcpu, gfn_t gfn); +unsigned long kvm_vcpu_gfn_to_hva(struct kvm_vcpu *vcpu, gfn_t gfn); +unsigned long kvm_vcpu_gfn_to_hva_prot(struct kvm_vcpu *vcpu, gfn_t gfn, bool *writable); +int kvm_vcpu_read_guest_page(struct kvm_vcpu *vcpu, gfn_t gfn, void *data, int offset, + int len); +int kvm_vcpu_read_guest_atomic(struct kvm_vcpu *vcpu, gpa_t gpa, void *data, + unsigned long len); +int kvm_vcpu_read_guest(struct kvm_vcpu *vcpu, gpa_t gpa, void *data, + unsigned long len); +int kvm_vcpu_write_guest_page(struct kvm_vcpu *vcpu, gfn_t gfn, const void *data, + int offset, int len); +int kvm_vcpu_write_guest(struct kvm_vcpu *vcpu, gpa_t gpa, const void *data, + unsigned long len); +void kvm_vcpu_mark_page_dirty(struct kvm_vcpu *vcpu, gfn_t gfn); + void kvm_vcpu_block(struct kvm_vcpu *vcpu); void kvm_vcpu_kick(struct kvm_vcpu *vcpu); int kvm_vcpu_yield_to(struct kvm_vcpu *target); @@ -762,16 +807,10 @@ static inline void kvm_iommu_unmap_pages(struct kvm *kvm, } #endif -static inline void kvm_guest_enter(void) +/* must be called with irqs disabled */ +static inline void __kvm_guest_enter(void) { - unsigned long flags; - - BUG_ON(preemptible()); - - local_irq_save(flags); guest_enter(); - local_irq_restore(flags); - /* KVM does not hold any references to rcu protected data when it * switches CPU into a guest mode. In fact switching to a guest mode * is very similar to exiting to userspace from rcu point of view. In @@ -783,12 +822,27 @@ static inline void kvm_guest_enter(void) rcu_virt_note_context_switch(smp_processor_id()); } +/* must be called with irqs disabled */ +static inline void __kvm_guest_exit(void) +{ + guest_exit(); +} + +static inline void kvm_guest_enter(void) +{ + unsigned long flags; + + local_irq_save(flags); + __kvm_guest_enter(); + local_irq_restore(flags); +} + static inline void kvm_guest_exit(void) { unsigned long flags; local_irq_save(flags); - guest_exit(); + __kvm_guest_exit(); local_irq_restore(flags); } diff --git a/include/linux/kvm_types.h b/include/linux/kvm_types.h index 931da7e917cf..1b47a185c2f0 100644 --- a/include/linux/kvm_types.h +++ b/include/linux/kvm_types.h @@ -28,6 +28,7 @@ struct kvm_run; struct kvm_userspace_memory_region; struct kvm_vcpu; struct kvm_vcpu_init; +struct kvm_memslots; enum kvm_mr_change; diff --git a/include/linux/lglock.h b/include/linux/lglock.h index 0081f000e34b..c92ebd100d9b 100644 --- a/include/linux/lglock.h +++ b/include/linux/lglock.h @@ -52,10 +52,15 @@ struct lglock { static struct lglock name = { .lock = &name ## _lock } void lg_lock_init(struct lglock *lg, char *name); + void lg_local_lock(struct lglock *lg); void lg_local_unlock(struct lglock *lg); void lg_local_lock_cpu(struct lglock *lg, int cpu); void lg_local_unlock_cpu(struct lglock *lg, int cpu); + +void lg_double_lock(struct lglock *lg, int cpu1, int cpu2); +void lg_double_unlock(struct lglock *lg, int cpu1, int cpu2); + void lg_global_lock(struct lglock *lg); void lg_global_unlock(struct lglock *lg); diff --git a/include/linux/libata.h b/include/linux/libata.h index 28aeae46f355..51cb312d9bb9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -134,7 +134,6 @@ enum { ATA_ALL_DEVICES = (1 << ATA_MAX_DEVICES) - 1, ATA_SHT_EMULATED = 1, - ATA_SHT_CMD_PER_LUN = 1, ATA_SHT_THIS_ID = -1, ATA_SHT_USE_CLUSTERING = 1, @@ -1364,7 +1363,6 @@ extern struct device_attribute *ata_common_sdev_attrs[]; .can_queue = ATA_DEF_QUEUE, \ .tag_alloc_policy = BLK_TAG_ALLOC_RR, \ .this_id = ATA_SHT_THIS_ID, \ - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, \ .emulated = ATA_SHT_EMULATED, \ .use_clustering = ATA_SHT_USE_CLUSTERING, \ .proc_name = drv_name, \ diff --git a/include/linux/livepatch.h b/include/linux/livepatch.h index ee6dbb39a809..31db7a05dd36 100644 --- a/include/linux/livepatch.h +++ b/include/linux/livepatch.h @@ -99,7 +99,7 @@ struct klp_object { struct klp_func *funcs; /* internal */ - struct kobject *kobj; + struct kobject kobj; struct module *mod; enum klp_state state; }; @@ -123,6 +123,12 @@ struct klp_patch { enum klp_state state; }; +#define klp_for_each_object(patch, obj) \ + for (obj = patch->objs; obj->funcs; obj++) + +#define klp_for_each_func(obj, func) \ + for (func = obj->funcs; func->old_name; func++) + int klp_register_patch(struct klp_patch *); int klp_unregister_patch(struct klp_patch *); int klp_enable_patch(struct klp_patch *); diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 066ba4157541..2722111591a3 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -130,8 +130,8 @@ enum bounce_type { }; struct lock_class_stats { - unsigned long contention_point[4]; - unsigned long contending_point[4]; + unsigned long contention_point[LOCKSTAT_POINTS]; + unsigned long contending_point[LOCKSTAT_POINTS]; struct lock_time read_waittime; struct lock_time write_waittime; struct lock_time read_holdtime; diff --git a/include/linux/mbus.h b/include/linux/mbus.h index 611b69fa8594..1f7bc630d225 100644 --- a/include/linux/mbus.h +++ b/include/linux/mbus.h @@ -54,11 +54,16 @@ struct mbus_dram_target_info */ #ifdef CONFIG_PLAT_ORION extern const struct mbus_dram_target_info *mv_mbus_dram_info(void); +extern const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void); #else static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void) { return NULL; } +static inline const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void) +{ + return NULL; +} #endif int mvebu_mbus_save_cpu_target(u32 *store_addr); diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index 16a498f48169..2f434f4f79a1 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -117,6 +117,7 @@ struct arizona { int num_core_supplies; struct regulator_bulk_data core_supplies[ARIZONA_MAX_CORE_SUPPLIES]; struct regulator *dcvdd; + bool has_fully_powered_off; struct arizona_pdata pdata; @@ -153,7 +154,15 @@ int arizona_request_irq(struct arizona *arizona, int irq, char *name, void arizona_free_irq(struct arizona *arizona, int irq, void *data); int arizona_set_irq_wake(struct arizona *arizona, int irq, int on); +#ifdef CONFIG_MFD_WM5102 int wm5102_patch(struct arizona *arizona); +#else +static inline int wm5102_patch(struct arizona *arizona) +{ + return 0; +} +#endif + int wm5110_patch(struct arizona *arizona); int wm8997_patch(struct arizona *arizona); diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 1789cb0f4f17..f6722677e6d0 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -156,7 +156,10 @@ struct arizona_pdata { /** MICBIAS configurations */ struct arizona_micbias micbias[ARIZONA_MAX_MICBIAS]; - /** Mode of input structures */ + /** + * Mode of input structures + * One of the ARIZONA_INMODE_xxx values + */ int inmode[ARIZONA_MAX_INPUT]; /** Mode for outputs */ diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index aacc10d7789c..3499d36e6067 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -2515,9 +2515,12 @@ #define ARIZONA_IN1_DMIC_SUP_MASK 0x1800 /* IN1_DMIC_SUP - [12:11] */ #define ARIZONA_IN1_DMIC_SUP_SHIFT 11 /* IN1_DMIC_SUP - [12:11] */ #define ARIZONA_IN1_DMIC_SUP_WIDTH 2 /* IN1_DMIC_SUP - [12:11] */ -#define ARIZONA_IN1_MODE_MASK 0x0600 /* IN1_MODE - [10:9] */ -#define ARIZONA_IN1_MODE_SHIFT 9 /* IN1_MODE - [10:9] */ -#define ARIZONA_IN1_MODE_WIDTH 2 /* IN1_MODE - [10:9] */ +#define ARIZONA_IN1_MODE_MASK 0x0400 /* IN1_MODE - [10] */ +#define ARIZONA_IN1_MODE_SHIFT 10 /* IN1_MODE - [10] */ +#define ARIZONA_IN1_MODE_WIDTH 1 /* IN1_MODE - [10] */ +#define ARIZONA_IN1_SINGLE_ENDED_MASK 0x0200 /* IN1_MODE - [9] */ +#define ARIZONA_IN1_SINGLE_ENDED_SHIFT 9 /* IN1_MODE - [9] */ +#define ARIZONA_IN1_SINGLE_ENDED_WIDTH 1 /* IN1_MODE - [9] */ #define ARIZONA_IN1L_PGA_VOL_MASK 0x00FE /* IN1L_PGA_VOL - [7:1] */ #define ARIZONA_IN1L_PGA_VOL_SHIFT 1 /* IN1L_PGA_VOL - [7:1] */ #define ARIZONA_IN1L_PGA_VOL_WIDTH 7 /* IN1L_PGA_VOL - [7:1] */ @@ -2588,9 +2591,12 @@ #define ARIZONA_IN2_DMIC_SUP_MASK 0x1800 /* IN2_DMIC_SUP - [12:11] */ #define ARIZONA_IN2_DMIC_SUP_SHIFT 11 /* IN2_DMIC_SUP - [12:11] */ #define ARIZONA_IN2_DMIC_SUP_WIDTH 2 /* IN2_DMIC_SUP - [12:11] */ -#define ARIZONA_IN2_MODE_MASK 0x0600 /* IN2_MODE - [10:9] */ -#define ARIZONA_IN2_MODE_SHIFT 9 /* IN2_MODE - [10:9] */ -#define ARIZONA_IN2_MODE_WIDTH 2 /* IN2_MODE - [10:9] */ +#define ARIZONA_IN2_MODE_MASK 0x0400 /* IN2_MODE - [10] */ +#define ARIZONA_IN2_MODE_SHIFT 10 /* IN2_MODE - [10] */ +#define ARIZONA_IN2_MODE_WIDTH 1 /* IN2_MODE - [10] */ +#define ARIZONA_IN2_SINGLE_ENDED_MASK 0x0200 /* IN2_MODE - [9] */ +#define ARIZONA_IN2_SINGLE_ENDED_SHIFT 9 /* IN2_MODE - [9] */ +#define ARIZONA_IN2_SINGLE_ENDED_WIDTH 1 /* IN2_MODE - [9] */ #define ARIZONA_IN2L_PGA_VOL_MASK 0x00FE /* IN2L_PGA_VOL - [7:1] */ #define ARIZONA_IN2L_PGA_VOL_SHIFT 1 /* IN2L_PGA_VOL - [7:1] */ #define ARIZONA_IN2L_PGA_VOL_WIDTH 7 /* IN2L_PGA_VOL - [7:1] */ @@ -2661,9 +2667,12 @@ #define ARIZONA_IN3_DMIC_SUP_MASK 0x1800 /* IN3_DMIC_SUP - [12:11] */ #define ARIZONA_IN3_DMIC_SUP_SHIFT 11 /* IN3_DMIC_SUP - [12:11] */ #define ARIZONA_IN3_DMIC_SUP_WIDTH 2 /* IN3_DMIC_SUP - [12:11] */ -#define ARIZONA_IN3_MODE_MASK 0x0600 /* IN3_MODE - [10:9] */ -#define ARIZONA_IN3_MODE_SHIFT 9 /* IN3_MODE - [10:9] */ -#define ARIZONA_IN3_MODE_WIDTH 2 /* IN3_MODE - [10:9] */ +#define ARIZONA_IN3_MODE_MASK 0x0400 /* IN3_MODE - [10] */ +#define ARIZONA_IN3_MODE_SHIFT 10 /* IN3_MODE - [10] */ +#define ARIZONA_IN3_MODE_WIDTH 1 /* IN3_MODE - [10] */ +#define ARIZONA_IN3_SINGLE_ENDED_MASK 0x0200 /* IN3_MODE - [9] */ +#define ARIZONA_IN3_SINGLE_ENDED_SHIFT 9 /* IN3_MODE - [9] */ +#define ARIZONA_IN3_SINGLE_ENDED_WIDTH 1 /* IN3_MODE - [9] */ #define ARIZONA_IN3L_PGA_VOL_MASK 0x00FE /* IN3L_PGA_VOL - [7:1] */ #define ARIZONA_IN3L_PGA_VOL_SHIFT 1 /* IN3L_PGA_VOL - [7:1] */ #define ARIZONA_IN3L_PGA_VOL_WIDTH 7 /* IN3L_PGA_VOL - [7:1] */ diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index dfabd6db7ddf..02f97dc568ac 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -14,6 +14,7 @@ enum { AXP202_ID = 0, AXP209_ID, + AXP221_ID, AXP288_ID, NR_AXP20X_VARIANTS, }; @@ -45,6 +46,28 @@ enum { #define AXP20X_V_LTF_DISCHRG 0x3c #define AXP20X_V_HTF_DISCHRG 0x3d +#define AXP22X_PWR_OUT_CTRL1 0x10 +#define AXP22X_PWR_OUT_CTRL2 0x12 +#define AXP22X_PWR_OUT_CTRL3 0x13 +#define AXP22X_DLDO1_V_OUT 0x15 +#define AXP22X_DLDO2_V_OUT 0x16 +#define AXP22X_DLDO3_V_OUT 0x17 +#define AXP22X_DLDO4_V_OUT 0x18 +#define AXP22X_ELDO1_V_OUT 0x19 +#define AXP22X_ELDO2_V_OUT 0x1a +#define AXP22X_ELDO3_V_OUT 0x1b +#define AXP22X_DC5LDO_V_OUT 0x1c +#define AXP22X_DCDC1_V_OUT 0x21 +#define AXP22X_DCDC2_V_OUT 0x22 +#define AXP22X_DCDC3_V_OUT 0x23 +#define AXP22X_DCDC4_V_OUT 0x24 +#define AXP22X_DCDC5_V_OUT 0x25 +#define AXP22X_DCDC23_V_RAMP_CTRL 0x27 +#define AXP22X_ALDO1_V_OUT 0x28 +#define AXP22X_ALDO2_V_OUT 0x29 +#define AXP22X_ALDO3_V_OUT 0x2a +#define AXP22X_CHRG_CTRL3 0x35 + /* Interrupt */ #define AXP20X_IRQ1_EN 0x40 #define AXP20X_IRQ2_EN 0x41 @@ -100,6 +123,9 @@ enum { #define AXP20X_VBUS_MON 0x8b #define AXP20X_OVER_TMP 0x8f +#define AXP22X_PWREN_CTRL1 0x8c +#define AXP22X_PWREN_CTRL2 0x8d + /* GPIO */ #define AXP20X_GPIO0_CTRL 0x90 #define AXP20X_LDO5_V_OUT 0x91 @@ -108,6 +134,11 @@ enum { #define AXP20X_GPIO20_SS 0x94 #define AXP20X_GPIO3_CTRL 0x95 +#define AXP22X_LDO_IO0_V_OUT 0x91 +#define AXP22X_LDO_IO1_V_OUT 0x93 +#define AXP22X_GPIO_STATE 0x94 +#define AXP22X_GPIO_PULL_DOWN 0x95 + /* Battery */ #define AXP20X_CHRG_CC_31_24 0xb0 #define AXP20X_CHRG_CC_23_16 0xb1 @@ -120,6 +151,9 @@ enum { #define AXP20X_CC_CTRL 0xb8 #define AXP20X_FG_RES 0xb9 +/* AXP22X specific registers */ +#define AXP22X_BATLOW_THRES1 0xe6 + /* AXP288 specific registers */ #define AXP288_PMIC_ADC_H 0x56 #define AXP288_PMIC_ADC_L 0x57 @@ -158,6 +192,30 @@ enum { AXP20X_REG_ID_MAX, }; +enum { + AXP22X_DCDC1 = 0, + AXP22X_DCDC2, + AXP22X_DCDC3, + AXP22X_DCDC4, + AXP22X_DCDC5, + AXP22X_DC1SW, + AXP22X_DC5LDO, + AXP22X_ALDO1, + AXP22X_ALDO2, + AXP22X_ALDO3, + AXP22X_ELDO1, + AXP22X_ELDO2, + AXP22X_ELDO3, + AXP22X_DLDO1, + AXP22X_DLDO2, + AXP22X_DLDO3, + AXP22X_DLDO4, + AXP22X_RTC_LDO, + AXP22X_LDO_IO0, + AXP22X_LDO_IO1, + AXP22X_REG_ID_MAX, +}; + /* IRQs */ enum { AXP20X_IRQ_ACIN_OVER_V = 1, @@ -199,6 +257,34 @@ enum { AXP20X_IRQ_GPIO0_INPUT, }; +enum axp22x_irqs { + AXP22X_IRQ_ACIN_OVER_V = 1, + AXP22X_IRQ_ACIN_PLUGIN, + AXP22X_IRQ_ACIN_REMOVAL, + AXP22X_IRQ_VBUS_OVER_V, + AXP22X_IRQ_VBUS_PLUGIN, + AXP22X_IRQ_VBUS_REMOVAL, + AXP22X_IRQ_VBUS_V_LOW, + AXP22X_IRQ_BATT_PLUGIN, + AXP22X_IRQ_BATT_REMOVAL, + AXP22X_IRQ_BATT_ENT_ACT_MODE, + AXP22X_IRQ_BATT_EXIT_ACT_MODE, + AXP22X_IRQ_CHARG, + AXP22X_IRQ_CHARG_DONE, + AXP22X_IRQ_BATT_TEMP_HIGH, + AXP22X_IRQ_BATT_TEMP_LOW, + AXP22X_IRQ_DIE_TEMP_HIGH, + AXP22X_IRQ_PEK_SHORT, + AXP22X_IRQ_PEK_LONG, + AXP22X_IRQ_LOW_PWR_LVL1, + AXP22X_IRQ_LOW_PWR_LVL2, + AXP22X_IRQ_TIMER, + AXP22X_IRQ_PEK_RIS_EDGE, + AXP22X_IRQ_PEK_FAL_EDGE, + AXP22X_IRQ_GPIO1_INPUT, + AXP22X_IRQ_GPIO0_INPUT, +}; + enum axp288_irqs { AXP288_IRQ_VBUS_FALL = 2, AXP288_IRQ_VBUS_RISE, @@ -275,4 +361,11 @@ struct axp20x_fg_pdata { int thermistor_curve[MAX_THERM_CURVE_SIZE][2]; }; +struct axp20x_chrg_pdata { + int max_cc; + int max_cv; + int def_cc; + int def_cv; +}; + #endif /* __LINUX_MFD_AXP20X_H */ diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 324a34683971..da72671a42fa 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -17,10 +17,29 @@ #define __LINUX_MFD_CROS_EC_H #include <linux/cdev.h> +#include <linux/device.h> #include <linux/notifier.h> #include <linux/mfd/cros_ec_commands.h> #include <linux/mutex.h> +#define CROS_EC_DEV_NAME "cros_ec" +#define CROS_EC_DEV_PD_NAME "cros_pd" + +/* + * The EC is unresponsive for a time after a reboot command. Add a + * simple delay to make sure that the bus stays locked. + */ +#define EC_REBOOT_DELAY_MS 50 + +/* + * Max bus-specific overhead incurred by request/responses. + * I2C requires 1 additional byte for requests. + * I2C requires 2 additional bytes for responses. + * */ +#define EC_PROTO_VERSION_UNKNOWN 0 +#define EC_MAX_REQUEST_OVERHEAD 1 +#define EC_MAX_RESPONSE_OVERHEAD 2 + /* * Command interface between EC and AP, for LPC, I2C and SPI interfaces. */ @@ -42,8 +61,7 @@ enum { * @outsize: Outgoing length in bytes * @insize: Max number of bytes to accept from EC * @result: EC's response to the command (separate from communication failure) - * @outdata: Outgoing data to EC - * @indata: Where to put the incoming data from EC + * @data: Where to put the incoming data from EC and outgoing data to EC */ struct cros_ec_command { uint32_t version; @@ -51,18 +69,14 @@ struct cros_ec_command { uint32_t outsize; uint32_t insize; uint32_t result; - uint8_t outdata[EC_PROTO2_MAX_PARAM_SIZE]; - uint8_t indata[EC_PROTO2_MAX_PARAM_SIZE]; + uint8_t data[0]; }; /** * struct cros_ec_device - Information about a ChromeOS EC device * - * @ec_name: name of EC device (e.g. 'chromeos-ec') * @phys_name: name of physical comms layer (e.g. 'i2c-4') * @dev: Device pointer for physical comms device - * @vdev: Device pointer for virtual comms device - * @cdev: Character device structure for virtual comms device * @was_wake_device: true if this device was set to wake the system from * sleep at the last suspend * @cmd_readmem: direct read of the EC memory-mapped region, if supported @@ -74,6 +88,7 @@ struct cros_ec_command { * * @priv: Private data * @irq: Interrupt to use + * @id: Device id * @din: input buffer (for data from EC) * @dout: output buffer (for data to EC) * \note @@ -85,41 +100,72 @@ struct cros_ec_command { * to using dword. * @din_size: size of din buffer to allocate (zero to use static din) * @dout_size: size of dout buffer to allocate (zero to use static dout) - * @parent: pointer to parent device (e.g. i2c or spi device) * @wake_enabled: true if this device can wake the system from sleep * @cmd_xfer: send command to EC and get response * Returns the number of bytes received if the communication succeeded, but * that doesn't mean the EC was happy with the command. The caller * should check msg.result for the EC's result code. + * @pkt_xfer: send packet to EC and get response * @lock: one transaction at a time */ struct cros_ec_device { /* These are used by other drivers that want to talk to the EC */ - const char *ec_name; const char *phys_name; struct device *dev; - struct device *vdev; - struct cdev cdev; bool was_wake_device; struct class *cros_class; int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset, unsigned int bytes, void *dest); /* These are used to implement the platform-specific interface */ + u16 max_request; + u16 max_response; + u16 max_passthru; + u16 proto_version; void *priv; int irq; - uint8_t *din; - uint8_t *dout; + u8 *din; + u8 *dout; int din_size; int dout_size; - struct device *parent; bool wake_enabled; int (*cmd_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg); + int (*pkt_xfer)(struct cros_ec_device *ec, + struct cros_ec_command *msg); struct mutex lock; }; +/* struct cros_ec_platform - ChromeOS EC platform information + * + * @ec_name: name of EC device (e.g. 'cros-ec', 'cros-pd', ...) + * used in /dev/ and sysfs. + * @cmd_offset: offset to apply for each command. Set when + * registering a devicde behind another one. + */ +struct cros_ec_platform { + const char *ec_name; + u16 cmd_offset; +}; + +/* + * struct cros_ec_dev - ChromeOS EC device entry point + * + * @class_dev: Device structure used in sysfs + * @cdev: Character device structure in /dev + * @ec_dev: cros_ec_device structure to talk to the physical device + * @dev: pointer to the platform device + * @cmd_offset: offset to apply for each command. + */ +struct cros_ec_dev { + struct device class_dev; + struct cdev cdev; + struct cros_ec_device *ec_dev; + struct device *dev; + u16 cmd_offset; +}; + /** * cros_ec_suspend - Handle a suspend operation for the ChromeOS EC device * @@ -198,4 +244,16 @@ int cros_ec_remove(struct cros_ec_device *ec_dev); */ int cros_ec_register(struct cros_ec_device *ec_dev); +/** + * cros_ec_register - Query the protocol version supported by the ChromeOS EC + * + * @ec_dev: Device to register + * @return 0 if ok, -ve on error + */ +int cros_ec_query_all(struct cros_ec_device *ec_dev); + +/* sysfs stuff */ +extern struct attribute_group cros_ec_attr_group; +extern struct attribute_group cros_ec_lightbar_attr_group; + #endif /* __LINUX_MFD_CROS_EC_H */ diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index a49cd41feea7..13b630c10d4c 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -515,7 +515,7 @@ struct ec_host_response { /* * Notes on commands: * - * Each command is an 8-byte command value. Commands which take params or + * Each command is an 16-bit command value. Commands which take params or * return response data specify structs for that data. If no struct is * specified, the command does not input or output data, respectively. * Parameter/response length is implicit in the structs. Some underlying @@ -966,7 +966,7 @@ struct rgb_s { /* List of tweakable parameters. NOTE: It's __packed so it can be sent in a * host command, but the alignment is the same regardless. Keep it that way. */ -struct lightbar_params { +struct lightbar_params_v0 { /* Timing */ int32_t google_ramp_up; int32_t google_ramp_down; @@ -1000,32 +1000,81 @@ struct lightbar_params { struct rgb_s color[8]; /* 0-3 are Google colors */ } __packed; +struct lightbar_params_v1 { + /* Timing */ + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; + int32_t tap_tick_delay; + int32_t tap_display_time; + + /* Tap-for-battery params */ + uint8_t tap_pct_red; + uint8_t tap_pct_green; + uint8_t tap_seg_min_on; + uint8_t tap_seg_max_on; + uint8_t tap_seg_osc; + uint8_t tap_idx[3]; + + /* Oscillation */ + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ + + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ + + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; + + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +} __packed; + struct ec_params_lightbar { uint8_t cmd; /* Command (see enum lightbar_command) */ union { struct { /* no args */ - } dump, off, on, init, get_seq, get_params, version; + } dump, off, on, init, get_seq, get_params_v0, get_params_v1, + version, get_brightness, get_demo; - struct num { + struct { uint8_t num; - } brightness, seq, demo; + } set_brightness, seq, demo; - struct reg { + struct { uint8_t ctrl, reg, value; } reg; - struct rgb { + struct { uint8_t led, red, green, blue; - } rgb; + } set_rgb; + + struct { + uint8_t led; + } get_rgb; - struct lightbar_params set_params; + struct lightbar_params_v0 set_params_v0; + struct lightbar_params_v1 set_params_v1; }; } __packed; struct ec_response_lightbar { union { - struct dump { + struct { struct { uint8_t reg; uint8_t ic0; @@ -1033,20 +1082,26 @@ struct ec_response_lightbar { } vals[23]; } dump; - struct get_seq { + struct { uint8_t num; - } get_seq; + } get_seq, get_brightness, get_demo; - struct lightbar_params get_params; + struct lightbar_params_v0 get_params_v0; + struct lightbar_params_v1 get_params_v1; - struct version { + struct { uint32_t num; uint32_t flags; } version; struct { + uint8_t red, green, blue; + } get_rgb; + + struct { /* no return params */ - } off, on, init, brightness, seq, reg, rgb, demo, set_params; + } off, on, init, set_brightness, seq, reg, set_rgb, + demo, set_params_v0, set_params_v1; }; } __packed; @@ -1056,15 +1111,20 @@ enum lightbar_command { LIGHTBAR_CMD_OFF = 1, LIGHTBAR_CMD_ON = 2, LIGHTBAR_CMD_INIT = 3, - LIGHTBAR_CMD_BRIGHTNESS = 4, + LIGHTBAR_CMD_SET_BRIGHTNESS = 4, LIGHTBAR_CMD_SEQ = 5, LIGHTBAR_CMD_REG = 6, - LIGHTBAR_CMD_RGB = 7, + LIGHTBAR_CMD_SET_RGB = 7, LIGHTBAR_CMD_GET_SEQ = 8, LIGHTBAR_CMD_DEMO = 9, - LIGHTBAR_CMD_GET_PARAMS = 10, - LIGHTBAR_CMD_SET_PARAMS = 11, + LIGHTBAR_CMD_GET_PARAMS_V0 = 10, + LIGHTBAR_CMD_SET_PARAMS_V0 = 11, LIGHTBAR_CMD_VERSION = 12, + LIGHTBAR_CMD_GET_BRIGHTNESS = 13, + LIGHTBAR_CMD_GET_RGB = 14, + LIGHTBAR_CMD_GET_DEMO = 15, + LIGHTBAR_CMD_GET_PARAMS_V1 = 16, + LIGHTBAR_CMD_SET_PARAMS_V1 = 17, LIGHTBAR_NUM_CMDS }; @@ -1421,8 +1481,40 @@ struct ec_response_rtc { /*****************************************************************************/ /* Port80 log access */ +/* Maximum entries that can be read/written in a single command */ +#define EC_PORT80_SIZE_MAX 32 + /* Get last port80 code from previous boot */ #define EC_CMD_PORT80_LAST_BOOT 0x48 +#define EC_CMD_PORT80_READ 0x48 + +enum ec_port80_subcmd { + EC_PORT80_GET_INFO = 0, + EC_PORT80_READ_BUFFER, +}; + +struct ec_params_port80_read { + uint16_t subcmd; + union { + struct { + uint32_t offset; + uint32_t num_entries; + } read_buffer; + }; +} __packed; + +struct ec_response_port80_read { + union { + struct { + uint32_t writes; + uint32_t history_size; + uint32_t last_boot; + } get_info; + struct { + uint16_t codes[EC_PORT80_SIZE_MAX]; + } data; + }; +} __packed; struct ec_response_port80_last_boot { uint16_t code; @@ -1782,6 +1874,7 @@ struct ec_params_gpio_set { /* Get GPIO value */ #define EC_CMD_GPIO_GET 0x93 +/* Version 0 of input params and response */ struct ec_params_gpio_get { char name[32]; } __packed; @@ -1789,6 +1882,38 @@ struct ec_response_gpio_get { uint8_t val; } __packed; +/* Version 1 of input params and response */ +struct ec_params_gpio_get_v1 { + uint8_t subcmd; + union { + struct { + char name[32]; + } get_value_by_name; + struct { + uint8_t index; + } get_info; + }; +} __packed; + +struct ec_response_gpio_get_v1 { + union { + struct { + uint8_t val; + } get_value_by_name, get_count; + struct { + uint8_t val; + char name[32]; + uint32_t flags; + } get_info; + }; +} __packed; + +enum gpio_get_subcmd { + EC_GPIO_GET_BY_NAME = 0, + EC_GPIO_GET_COUNT = 1, + EC_GPIO_GET_INFO = 2, +}; + /*****************************************************************************/ /* I2C commands. Only available when flash write protect is unlocked. */ @@ -1857,13 +1982,21 @@ struct ec_params_charge_control { /*****************************************************************************/ /* - * Cut off battery power output if the battery supports. + * Cut off battery power immediately or after the host has shut down. * - * For unsupported battery, just don't implement this command and lets EC - * return EC_RES_INVALID_COMMAND. + * return EC_RES_INVALID_COMMAND if unsupported by a board/battery. + * EC_RES_SUCCESS if the command was successful. + * EC_RES_ERROR if the cut off command failed. */ + #define EC_CMD_BATTERY_CUT_OFF 0x99 +#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0) + +struct ec_params_battery_cutoff { + uint8_t flags; +} __packed; + /*****************************************************************************/ /* USB port mux control. */ @@ -2142,6 +2275,32 @@ struct ec_params_sb_wr_block { } __packed; /*****************************************************************************/ +/* Battery vendor parameters + * + * Get or set vendor-specific parameters in the battery. Implementations may + * differ between boards or batteries. On a set operation, the response + * contains the actual value set, which may be rounded or clipped from the + * requested value. + */ + +#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4 + +enum ec_battery_vendor_param_mode { + BATTERY_VENDOR_PARAM_MODE_GET = 0, + BATTERY_VENDOR_PARAM_MODE_SET, +}; + +struct ec_params_battery_vendor_param { + uint32_t param; + uint32_t value; + uint8_t mode; +} __packed; + +struct ec_response_battery_vendor_param { + uint32_t value; +} __packed; + +/*****************************************************************************/ /* System commands */ /* @@ -2338,6 +2497,80 @@ struct ec_params_reboot_ec { /*****************************************************************************/ /* + * PD commands + * + * These commands are for PD MCU communication. + */ + +/* EC to PD MCU exchange status command */ +#define EC_CMD_PD_EXCHANGE_STATUS 0x100 + +/* Status of EC being sent to PD */ +struct ec_params_pd_status { + int8_t batt_soc; /* battery state of charge */ +} __packed; + +/* Status of PD being sent back to EC */ +struct ec_response_pd_status { + int8_t status; /* PD MCU status */ + uint32_t curr_lim_ma; /* input current limit */ +} __packed; + +/* Set USB type-C port role and muxes */ +#define EC_CMD_USB_PD_CONTROL 0x101 + +enum usb_pd_control_role { + USB_PD_CTRL_ROLE_NO_CHANGE = 0, + USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */ + USB_PD_CTRL_ROLE_TOGGLE_OFF = 2, + USB_PD_CTRL_ROLE_FORCE_SINK = 3, + USB_PD_CTRL_ROLE_FORCE_SOURCE = 4, +}; + +enum usb_pd_control_mux { + USB_PD_CTRL_MUX_NO_CHANGE = 0, + USB_PD_CTRL_MUX_NONE = 1, + USB_PD_CTRL_MUX_USB = 2, + USB_PD_CTRL_MUX_DP = 3, + USB_PD_CTRL_MUX_DOCK = 4, + USB_PD_CTRL_MUX_AUTO = 5, +}; + +struct ec_params_usb_pd_control { + uint8_t port; + uint8_t role; + uint8_t mux; +} __packed; + +/*****************************************************************************/ +/* + * Passthru commands + * + * Some platforms have sub-processors chained to each other. For example. + * + * AP <--> EC <--> PD MCU + * + * The top 2 bits of the command number are used to indicate which device the + * command is intended for. Device 0 is always the device receiving the + * command; other device mapping is board-specific. + * + * When a device receives a command to be passed to a sub-processor, it passes + * it on with the device number set back to 0. This allows the sub-processor + * to remain blissfully unaware of whether the command originated on the next + * device up the chain, or was passed through from the AP. + * + * In the above example, if the AP wants to send command 0x0002 to the PD MCU, + * AP sends command 0x4002 to the EC + * EC sends command 0x0002 to the PD MCU + * EC forwards PD MCU response back to the AP + */ + +/* Offset and max command number for sub-device n */ +#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n)) +#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff) + +/*****************************************************************************/ +/* * Deprecated constants. These constants have been renamed for clarity. The * meaning and size has not changed. Programs that use the old names should * switch to the new names soon, as the old names may not be carried forward diff --git a/include/linux/mfd/da9055/core.h b/include/linux/mfd/da9055/core.h index 956afa445998..5dc743fd63a6 100644 --- a/include/linux/mfd/da9055/core.h +++ b/include/linux/mfd/da9055/core.h @@ -89,6 +89,6 @@ static inline int da9055_reg_update(struct da9055 *da9055, unsigned char reg, int da9055_device_init(struct da9055 *da9055); void da9055_device_exit(struct da9055 *da9055); -extern struct regmap_config da9055_regmap_config; +extern const struct regmap_config da9055_regmap_config; #endif /* __DA9055_CORE_H */ diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index bb995ab9a575..d4b72d519115 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -125,9 +125,4 @@ enum max77686_opmode { MAX77686_OPMODE_STANDBY, }; -struct max77686_opmode_data { - int id; - int mode; -}; - #endif /* __LINUX_MFD_MAX77686_H */ diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 83e80ab94500..f94984fb8bb2 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -829,6 +829,12 @@ struct mlx4_dev { struct mlx4_vf_dev *dev_vfs; }; +struct mlx4_clock_params { + u64 offset; + u8 bar; + u8 size; +}; + struct mlx4_eqe { u8 reserved1; u8 type; @@ -1485,4 +1491,7 @@ int mlx4_ACCESS_PTYS_REG(struct mlx4_dev *dev, enum mlx4_access_reg_method method, struct mlx4_ptys_reg *ptys_reg); +int mlx4_get_internal_clock_params(struct mlx4_dev *dev, + struct mlx4_clock_params *params); + #endif /* MLX4_DEVICE_H */ diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 9a90e7523dc2..9ec7c93d6fa3 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -696,7 +696,7 @@ int mlx5_core_dump_fill_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mr *mr, u32 *mkey); int mlx5_core_alloc_pd(struct mlx5_core_dev *dev, u32 *pdn); int mlx5_core_dealloc_pd(struct mlx5_core_dev *dev, u32 pdn); -int mlx5_core_mad_ifc(struct mlx5_core_dev *dev, void *inb, void *outb, +int mlx5_core_mad_ifc(struct mlx5_core_dev *dev, const void *inb, void *outb, u16 opmod, u8 port); void mlx5_pagealloc_init(struct mlx5_core_dev *dev); void mlx5_pagealloc_cleanup(struct mlx5_core_dev *dev); diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 19f0175c0afa..4d3776d25925 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -97,6 +97,7 @@ struct mmc_ext_csd { u8 raw_erased_mem_count; /* 181 */ u8 raw_ext_csd_structure; /* 194 */ u8 raw_card_type; /* 196 */ + u8 raw_driver_strength; /* 197 */ u8 out_of_int_time; /* 198 */ u8 raw_pwr_cl_52_195; /* 200 */ u8 raw_pwr_cl_26_195; /* 201 */ @@ -305,6 +306,7 @@ struct mmc_card { unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */ unsigned int mmc_avail_type; /* supported device type by both host and card */ + unsigned int drive_strength; /* for UHS-I, HS200 or HS400 */ struct dentry *debugfs_root; struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */ diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index de722d4e9d61..258daf914c6d 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -121,6 +121,7 @@ struct mmc_data { struct mmc_request *mrq; /* associated request */ unsigned int sg_len; /* size of scatter list */ + int sg_count; /* mapped sg entries */ struct scatterlist *sg; /* I/O scatter list */ s32 host_cookie; /* host private data */ }; diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 12111993a317..5be97676f1fa 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -226,12 +226,6 @@ struct dw_mci_dma_ops { #define DW_MCI_QUIRK_HIGHSPEED BIT(2) /* Unreliable card detection */ #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION BIT(3) -/* No write protect */ -#define DW_MCI_QUIRK_NO_WRITE_PROTECT BIT(4) - -/* Slot level quirks */ -/* This slot has no write protect */ -#define DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT BIT(0) struct dma_pdata; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index b5bedaec6223..1369e54faeb7 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -12,6 +12,7 @@ #include <linux/leds.h> #include <linux/mutex.h> +#include <linux/timer.h> #include <linux/sched.h> #include <linux/device.h> #include <linux/fault-inject.h> @@ -131,7 +132,9 @@ struct mmc_host_ops { /* Prepare HS400 target operating frequency depending host driver */ int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); - int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); + int (*select_drive_strength)(struct mmc_card *card, + unsigned int max_dtr, int host_drv, + int card_drv, int *drv_type); void (*hw_reset)(struct mmc_host *host); void (*card_event)(struct mmc_host *host); @@ -285,6 +288,7 @@ struct mmc_host { MMC_CAP2_HS400_1_2V) #define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V) #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) +#define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ mmc_pm_flag_t pm_caps; /* supported pm features */ @@ -321,10 +325,18 @@ struct mmc_host { #ifdef CONFIG_MMC_DEBUG unsigned int removed:1; /* host is being removed */ #endif + unsigned int can_retune:1; /* re-tuning can be used */ + unsigned int doing_retune:1; /* re-tuning in progress */ + unsigned int retune_now:1; /* do re-tuning at next req */ int rescan_disable; /* disable card detection */ int rescan_entered; /* used with nonremovable devices */ + int need_retune; /* re-tuning is needed */ + int hold_retune; /* hold off re-tuning */ + unsigned int retune_period; /* re-tuning period in secs */ + struct timer_list retune_timer; /* for periodic re-tuning */ + bool trigger_card_event; /* card_event necessary */ struct mmc_card *card; /* device attached to this host */ @@ -513,4 +525,18 @@ static inline bool mmc_card_hs400(struct mmc_card *card) return card->host->ios.timing == MMC_TIMING_MMC_HS400; } +void mmc_retune_timer_stop(struct mmc_host *host); + +static inline void mmc_retune_needed(struct mmc_host *host) +{ + if (host->can_retune) + host->need_retune = 1; +} + +static inline void mmc_retune_recheck(struct mmc_host *host) +{ + if (host->hold_retune <= 1) + host->retune_now = 1; +} + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 124f562118b8..15f2c4a0a62c 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -302,6 +302,7 @@ struct _mmc_csd { #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_STRUCTURE 194 /* RO */ #define EXT_CSD_CARD_TYPE 196 /* RO */ +#define EXT_CSD_DRIVER_STRENGTH 197 /* RO */ #define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */ #define EXT_CSD_PART_SWITCH_TIME 199 /* RO */ #define EXT_CSD_PWR_CL_52_195 200 /* RO */ @@ -390,6 +391,7 @@ struct _mmc_csd { #define EXT_CSD_TIMING_HS 1 /* High speed */ #define EXT_CSD_TIMING_HS200 2 /* HS200 */ #define EXT_CSD_TIMING_HS400 3 /* HS400 */ +#define EXT_CSD_DRV_STR_SHIFT 4 /* Driver Strength shift */ #define EXT_CSD_SEC_ER_EN BIT(0) #define EXT_CSD_SEC_BD_BLK_EN BIT(2) @@ -441,4 +443,6 @@ struct _mmc_csd { #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */ #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */ +#define mmc_driver_type_mask(n) (1 << (n)) + #endif /* LINUX_MMC_MMC_H */ diff --git a/include/linux/mmc/sdhci-pci-data.h b/include/linux/mmc/sdhci-pci-data.h index 8959604a13d3..fda15b6d4135 100644 --- a/include/linux/mmc/sdhci-pci-data.h +++ b/include/linux/mmc/sdhci-pci-data.h @@ -15,4 +15,6 @@ struct sdhci_pci_data { extern struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev, int slotno); +extern int sdhci_pci_spt_drive_strength; + #endif diff --git a/include/linux/module.h b/include/linux/module.h index c883b86ea964..1e5436042eb0 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -655,4 +655,16 @@ static inline void module_bug_finalize(const Elf_Ehdr *hdr, static inline void module_bug_cleanup(struct module *mod) {} #endif /* CONFIG_GENERIC_BUG */ +#ifdef CONFIG_MODULE_SIG +static inline bool module_sig_ok(struct module *module) +{ + return module->sig_ok; +} +#else /* !CONFIG_MODULE_SIG */ +static inline bool module_sig_ok(struct module *module) +{ + return true; +} +#endif /* CONFIG_MODULE_SIG */ + #endif /* _LINUX_MODULE_H */ diff --git a/include/linux/mpi.h b/include/linux/mpi.h index 5af1b81def49..641b7d6fd096 100644 --- a/include/linux/mpi.h +++ b/include/linux/mpi.h @@ -81,6 +81,8 @@ MPI mpi_read_from_buffer(const void *buffer, unsigned *ret_nread); int mpi_fromstr(MPI val, const char *str); u32 mpi_get_keyid(MPI a, u32 *keyid); void *mpi_get_buffer(MPI a, unsigned *nbytes, int *sign); +int mpi_read_buffer(MPI a, uint8_t *buf, unsigned buf_len, unsigned *nbytes, + int *sign); void *mpi_get_secure_buffer(MPI a, unsigned *nbytes, int *sign); int mpi_set_buffer(MPI a, const void *buffer, unsigned nbytes, int sign); @@ -142,4 +144,17 @@ int mpi_rshift(MPI x, MPI a, unsigned n); /*-- mpi-inv.c --*/ int mpi_invm(MPI x, MPI u, MPI v); +/* inline functions */ + +/** + * mpi_get_size() - returns max size required to store the number + * + * @a: A multi precision integer for which we want to allocate a bufer + * + * Return: size required to store the number + */ +static inline unsigned int mpi_get_size(MPI a) +{ + return a->nlimbs * BYTES_PER_MPI_LIMB; +} #endif /*G10_MPI_H */ diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 299d7d31fe53..9b57a9b1b081 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -296,183 +296,19 @@ struct cfi_private { struct flchip chips[0]; /* per-chip data structure for each chip */ }; -/* - * Returns the command address according to the given geometry. - */ -static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, - struct map_info *map, struct cfi_private *cfi) -{ - unsigned bankwidth = map_bankwidth(map); - unsigned interleave = cfi_interleave(cfi); - unsigned type = cfi->device_type; - uint32_t addr; - - addr = (cmd_ofs * type) * interleave; - - /* Modify the unlock address if we are in compatibility mode. - * For 16bit devices on 8 bit busses - * and 32bit devices on 16 bit busses - * set the low bit of the alternating bit sequence of the address. - */ - if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa)) - addr |= (type >> 1)*interleave; - - return addr; -} - -/* - * Transforms the CFI command for the given geometry (bus width & interleave). - * It looks too long to be inline, but in the common case it should almost all - * get optimised away. - */ -static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi) -{ - map_word val = { {0} }; - int wordwidth, words_per_bus, chip_mode, chips_per_word; - unsigned long onecmd; - int i; - - /* We do it this way to give the compiler a fighting chance - of optimising away all the crap for 'bankwidth' larger than - an unsigned long, in the common case where that support is - disabled */ - if (map_bankwidth_is_large(map)) { - wordwidth = sizeof(unsigned long); - words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 - } else { - wordwidth = map_bankwidth(map); - words_per_bus = 1; - } - - chip_mode = map_bankwidth(map) / cfi_interleave(cfi); - chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); - - /* First, determine what the bit-pattern should be for a single - device, according to chip mode and endianness... */ - switch (chip_mode) { - default: BUG(); - case 1: - onecmd = cmd; - break; - case 2: - onecmd = cpu_to_cfi16(map, cmd); - break; - case 4: - onecmd = cpu_to_cfi32(map, cmd); - break; - } - - /* Now replicate it across the size of an unsigned long, or - just to the bus width as appropriate */ - switch (chips_per_word) { - default: BUG(); -#if BITS_PER_LONG >= 64 - case 8: - onecmd |= (onecmd << (chip_mode * 32)); -#endif - case 4: - onecmd |= (onecmd << (chip_mode * 16)); - case 2: - onecmd |= (onecmd << (chip_mode * 8)); - case 1: - ; - } +uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, + struct map_info *map, struct cfi_private *cfi); - /* And finally, for the multi-word case, replicate it - in all words in the structure */ - for (i=0; i < words_per_bus; i++) { - val.x[i] = onecmd; - } - - return val; -} +map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi); #define CMD(x) cfi_build_cmd((x), map, cfi) - -static inline unsigned long cfi_merge_status(map_word val, struct map_info *map, - struct cfi_private *cfi) -{ - int wordwidth, words_per_bus, chip_mode, chips_per_word; - unsigned long onestat, res = 0; - int i; - - /* We do it this way to give the compiler a fighting chance - of optimising away all the crap for 'bankwidth' larger than - an unsigned long, in the common case where that support is - disabled */ - if (map_bankwidth_is_large(map)) { - wordwidth = sizeof(unsigned long); - words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 - } else { - wordwidth = map_bankwidth(map); - words_per_bus = 1; - } - - chip_mode = map_bankwidth(map) / cfi_interleave(cfi); - chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); - - onestat = val.x[0]; - /* Or all status words together */ - for (i=1; i < words_per_bus; i++) { - onestat |= val.x[i]; - } - - res = onestat; - switch(chips_per_word) { - default: BUG(); -#if BITS_PER_LONG >= 64 - case 8: - res |= (onestat >> (chip_mode * 32)); -#endif - case 4: - res |= (onestat >> (chip_mode * 16)); - case 2: - res |= (onestat >> (chip_mode * 8)); - case 1: - ; - } - - /* Last, determine what the bit-pattern should be for a single - device, according to chip mode and endianness... */ - switch (chip_mode) { - case 1: - break; - case 2: - res = cfi16_to_cpu(map, res); - break; - case 4: - res = cfi32_to_cpu(map, res); - break; - default: BUG(); - } - return res; -} - +unsigned long cfi_merge_status(map_word val, struct map_info *map, + struct cfi_private *cfi); #define MERGESTATUS(x) cfi_merge_status((x), map, cfi) - -/* - * Sends a CFI command to a bank of flash for the given geometry. - * - * Returns the offset in flash where the command was written. - * If prev_val is non-null, it will be set to the value at the command address, - * before the command was written. - */ -static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, +uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, struct map_info *map, struct cfi_private *cfi, - int type, map_word *prev_val) -{ - map_word val; - uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); - val = cfi_build_cmd(cmd, map, cfi); - - if (prev_val) - *prev_val = map_read(map, addr); - - map_write(map, val, addr); - - return addr - base; -} + int type, map_word *prev_val); static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr) { @@ -506,15 +342,7 @@ static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr) } } -static inline void cfi_udelay(int us) -{ - if (us >= 1000) { - msleep((us+999)/1000); - } else { - udelay(us); - cond_resched(); - } -} +void cfi_udelay(int us); int __xipram cfi_qry_present(struct map_info *map, __u32 base, struct cfi_private *cfi); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 3d4ea7eb2b68..f25e2bdd188c 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -26,6 +26,8 @@ struct mtd_info; struct nand_flash_dev; +struct device_node; + /* Scan and identify a NAND device */ extern int nand_scan(struct mtd_info *mtd, int max_chips); /* @@ -542,6 +544,7 @@ struct nand_buffers { * flash device * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the * flash device. + * @dn: [BOARDSPECIFIC] device node describing this instance * @read_byte: [REPLACEABLE] read one byte from the chip * @read_word: [REPLACEABLE] read one word from the chip * @write_byte: [REPLACEABLE] write a single byte to the chip on the @@ -644,6 +647,8 @@ struct nand_chip { void __iomem *IO_ADDR_R; void __iomem *IO_ADDR_W; + struct device_node *dn; + uint8_t (*read_byte)(struct mtd_info *mtd); u16 (*read_word)(struct mtd_info *mtd); void (*write_byte)(struct mtd_info *mtd, uint8_t byte); @@ -833,7 +838,6 @@ struct nand_manufacturers { extern struct nand_flash_dev nand_flash_ids[]; extern struct nand_manufacturers nand_manuf_ids[]; -extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); extern int nand_default_bbt(struct mtd_info *mtd); extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); extern int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs); diff --git a/include/linux/namei.h b/include/linux/namei.h index c8990779f0c3..d8c6334cd150 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -1,16 +1,15 @@ #ifndef _LINUX_NAMEI_H #define _LINUX_NAMEI_H -#include <linux/dcache.h> -#include <linux/errno.h> -#include <linux/linkage.h> +#include <linux/kernel.h> #include <linux/path.h> - -struct vfsmount; -struct nameidata; +#include <linux/fcntl.h> +#include <linux/errno.h> enum { MAX_NESTED_LINKS = 8 }; +#define MAXSYMLINKS 40 + /* * Type of the last component on LOOKUP_PARENT */ @@ -45,13 +44,29 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND}; #define LOOKUP_ROOT 0x2000 #define LOOKUP_EMPTY 0x4000 -extern int user_path_at(int, const char __user *, unsigned, struct path *); extern int user_path_at_empty(int, const char __user *, unsigned, struct path *, int *empty); -#define user_path(name, path) user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW, path) -#define user_lpath(name, path) user_path_at(AT_FDCWD, name, 0, path) -#define user_path_dir(name, path) \ - user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, path) +static inline int user_path_at(int dfd, const char __user *name, unsigned flags, + struct path *path) +{ + return user_path_at_empty(dfd, name, flags, path, NULL); +} + +static inline int user_path(const char __user *name, struct path *path) +{ + return user_path_at_empty(AT_FDCWD, name, LOOKUP_FOLLOW, path, NULL); +} + +static inline int user_lpath(const char __user *name, struct path *path) +{ + return user_path_at_empty(AT_FDCWD, name, 0, path, NULL); +} + +static inline int user_path_dir(const char __user *name, struct path *path) +{ + return user_path_at_empty(AT_FDCWD, name, + LOOKUP_FOLLOW | LOOKUP_DIRECTORY, path, NULL); +} extern int kern_path(const char *, unsigned, struct path *); @@ -70,9 +85,7 @@ extern int follow_up(struct path *); extern struct dentry *lock_rename(struct dentry *, struct dentry *); extern void unlock_rename(struct dentry *, struct dentry *); -extern void nd_jump_link(struct nameidata *nd, struct path *path); -extern void nd_set_link(struct nameidata *nd, char *path); -extern char *nd_get_link(struct nameidata *nd); +extern void nd_jump_link(struct path *path); static inline void nd_terminate_link(void *name, size_t len, size_t maxlen) { diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h index f1bd3962e6b6..8ca6d6464ea3 100644 --- a/include/linux/netfilter_bridge/ebtables.h +++ b/include/linux/netfilter_bridge/ebtables.h @@ -6,7 +6,7 @@ * * ebtables.c,v 2.0, April, 2002 * - * This code is stongly inspired on the iptables code which is + * This code is strongly inspired by the iptables code which is * Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling */ #ifndef __LINUX_BRIDGE_EFF_H diff --git a/include/linux/nx842.h b/include/linux/nx842.h deleted file mode 100644 index a4d324c6406a..000000000000 --- a/include/linux/nx842.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __NX842_H__ -#define __NX842_H__ - -int nx842_get_workmem_size(void); -int nx842_get_workmem_size_aligned(void); -int nx842_compress(const unsigned char *in, unsigned int in_len, - unsigned char *out, unsigned int *out_len, void *wrkmem); -int nx842_decompress(const unsigned char *in, unsigned int in_len, - unsigned char *out, unsigned int *out_len, void *wrkmem); - -#endif diff --git a/include/linux/of.h b/include/linux/of.h index ddeaae6d2083..b871ff9d81d7 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -121,6 +121,8 @@ extern struct device_node *of_stdout; extern raw_spinlock_t devtree_lock; #ifdef CONFIG_OF +void of_core_init(void); + static inline bool is_of_node(struct fwnode_handle *fwnode) { return fwnode && fwnode->type == FWNODE_OF; @@ -376,6 +378,10 @@ bool of_console_check(struct device_node *dn, char *name, int index); #else /* CONFIG_OF */ +static inline void of_core_init(void) +{ +} + static inline bool is_of_node(struct fwnode_handle *fwnode) { return false; diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h index 587ee507965d..fd627a58068f 100644 --- a/include/linux/of_fdt.h +++ b/include/linux/of_fdt.h @@ -64,6 +64,7 @@ extern int early_init_dt_scan_chosen(unsigned long node, const char *uname, extern int early_init_dt_scan_memory(unsigned long node, const char *uname, int depth, void *data); extern void early_init_fdt_scan_reserved_mem(void); +extern void early_init_fdt_reserve_self(void); extern void early_init_dt_add_memory_arch(u64 base, u64 size); extern int early_init_dt_reserve_memory_arch(phys_addr_t base, phys_addr_t size, bool no_map); @@ -91,6 +92,7 @@ extern u64 fdt_translate_address(const void *blob, int node_offset); extern void of_fdt_limit_memory(int limit); #else /* CONFIG_OF_FLATTREE */ static inline void early_init_fdt_scan_reserved_mem(void) {} +static inline void early_init_fdt_reserve_self(void) {} static inline const char *of_flat_dt_get_machine_name(void) { return NULL; } static inline void unflatten_device_tree(void) {} static inline void unflatten_and_copy_device_tree(void) {} diff --git a/include/linux/osq_lock.h b/include/linux/osq_lock.h index 3a6490e81b28..703ea5c30a33 100644 --- a/include/linux/osq_lock.h +++ b/include/linux/osq_lock.h @@ -32,4 +32,9 @@ static inline void osq_lock_init(struct optimistic_spin_queue *lock) extern bool osq_lock(struct optimistic_spin_queue *lock); extern void osq_unlock(struct optimistic_spin_queue *lock); +static inline bool osq_is_locked(struct optimistic_spin_queue *lock) +{ + return atomic_read(&lock->tail) != OSQ_UNLOCKED_VAL; +} + #endif diff --git a/include/linux/pci.h b/include/linux/pci.h index 353db8dc4c6e..8a0321a8fb59 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -355,6 +355,7 @@ struct pci_dev { unsigned int broken_intx_masking:1; unsigned int io_window_1k:1; /* Intel P2P bridge 1K I/O windows */ unsigned int irq_managed:1; + unsigned int has_secondary_link:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ @@ -577,9 +578,15 @@ int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn, int reg, int len, u32 val); +#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT +typedef u64 pci_bus_addr_t; +#else +typedef u32 pci_bus_addr_t; +#endif + struct pci_bus_region { - dma_addr_t start; - dma_addr_t end; + pci_bus_addr_t start; + pci_bus_addr_t end; }; struct pci_dynids { @@ -773,8 +780,6 @@ void pcibios_bus_to_resource(struct pci_bus *bus, struct resource *res, void pcibios_scan_specific_bus(int busn); struct pci_bus *pci_find_bus(int domain, int busnr); void pci_bus_add_devices(const struct pci_bus *bus); -struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, - struct pci_ops *ops, void *sysdata); struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_create_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, @@ -974,7 +979,6 @@ void pci_intx(struct pci_dev *dev, int enable); bool pci_intx_mask_supported(struct pci_dev *dev); bool pci_check_and_mask_intx(struct pci_dev *dev); bool pci_check_and_unmask_intx(struct pci_dev *dev); -void pci_msi_off(struct pci_dev *dev); int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size); int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask); int pci_wait_for_pending(struct pci_dev *dev, int pos, u16 mask); @@ -1006,6 +1010,7 @@ int __must_check pci_assign_resource(struct pci_dev *dev, int i); int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align); int pci_select_bars(struct pci_dev *dev, unsigned long flags); bool pci_device_is_present(struct pci_dev *pdev); +void pci_ignore_hotplug(struct pci_dev *dev); /* ROM control related routines */ int pci_enable_rom(struct pci_dev *pdev); @@ -1043,11 +1048,6 @@ bool pci_dev_run_wake(struct pci_dev *dev); bool pci_check_pme_status(struct pci_dev *dev); void pci_pme_wakeup_bus(struct pci_bus *bus); -static inline void pci_ignore_hotplug(struct pci_dev *dev) -{ - dev->ignore_hotplug = 1; -} - static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) { @@ -1128,7 +1128,7 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus, int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); -static inline dma_addr_t pci_bus_address(struct pci_dev *pdev, int bar) +static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) { struct pci_bus_region region; @@ -1197,15 +1197,6 @@ int pci_set_vga_state(struct pci_dev *pdev, bool decode, #define pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle) #define pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr) -enum pci_dma_burst_strategy { - PCI_DMA_BURST_INFINITY, /* make bursts as large as possible, - strategy_parameter is N/A */ - PCI_DMA_BURST_BOUNDARY, /* disconnect at every strategy_parameter - byte boundaries */ - PCI_DMA_BURST_MULTIPLE, /* disconnect at some multiple of - strategy_parameter byte boundaries */ -}; - struct msix_entry { u32 vector; /* kernel uses to write allocated vector */ u16 entry; /* driver uses to specify entry, OS writes */ @@ -1430,8 +1421,6 @@ static inline int pci_request_regions(struct pci_dev *dev, const char *res_name) { return -EIO; } static inline void pci_release_regions(struct pci_dev *dev) { } -#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0) - static inline void pci_block_cfg_access(struct pci_dev *dev) { } static inline int pci_block_cfg_access_in_atomic(struct pci_dev *dev) { return 0; } @@ -1905,4 +1894,15 @@ static inline bool pci_is_dev_assigned(struct pci_dev *pdev) { return (pdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED) == PCI_DEV_FLAGS_ASSIGNED; } + +/** + * pci_ari_enabled - query ARI forwarding status + * @bus: the PCI bus + * + * Returns true if ARI forwarding is enabled. + */ +static inline bool pci_ari_enabled(struct pci_bus *bus) +{ + return bus->self && bus->self->ari_enabled; +} #endif /* LINUX_PCI_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 2f7b9a40f627..cb63a7b522ef 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -579,6 +579,7 @@ #define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800 #define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b #define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c +#define PCI_DEVICE_ID_AMD_KERNCZ_SMBUS 0x790b #define PCI_VENDOR_ID_TRIDENT 0x1023 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 61992cf2e977..1b82d44b0a02 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -92,8 +92,6 @@ struct hw_perf_event_extra { int idx; /* index in shared_regs->regs[] */ }; -struct event_constraint; - /** * struct hw_perf_event - performance event hardware details: */ @@ -112,8 +110,6 @@ struct hw_perf_event { struct hw_perf_event_extra extra_reg; struct hw_perf_event_extra branch_reg; - - struct event_constraint *constraint; }; struct { /* software */ struct hrtimer hrtimer; @@ -124,7 +120,7 @@ struct hw_perf_event { }; struct { /* intel_cqm */ int cqm_state; - int cqm_rmid; + u32 cqm_rmid; struct list_head cqm_events_entry; struct list_head cqm_groups_entry; struct list_head cqm_group_entry; @@ -566,8 +562,12 @@ struct perf_cpu_context { struct perf_event_context *task_ctx; int active_oncpu; int exclusive; + + raw_spinlock_t hrtimer_lock; struct hrtimer hrtimer; ktime_t hrtimer_interval; + unsigned int hrtimer_active; + struct pmu *unique_pmu; struct perf_cgroup *cgrp; }; @@ -734,6 +734,22 @@ extern int perf_event_overflow(struct perf_event *event, struct perf_sample_data *data, struct pt_regs *regs); +extern void perf_event_output(struct perf_event *event, + struct perf_sample_data *data, + struct pt_regs *regs); + +extern void +perf_event_header__init_id(struct perf_event_header *header, + struct perf_sample_data *data, + struct perf_event *event); +extern void +perf_event__output_id_sample(struct perf_event *event, + struct perf_output_handle *handle, + struct perf_sample_data *sample); + +extern void +perf_log_lost_samples(struct perf_event *event, u64 lost); + static inline bool is_sampling_event(struct perf_event *event) { return event->attr.sample_period != 0; @@ -798,11 +814,33 @@ perf_sw_event_sched(u32 event_id, u64 nr, u64 addr) extern struct static_key_deferred perf_sched_events; +static __always_inline bool +perf_sw_migrate_enabled(void) +{ + if (static_key_false(&perf_swevent_enabled[PERF_COUNT_SW_CPU_MIGRATIONS])) + return true; + return false; +} + +static inline void perf_event_task_migrate(struct task_struct *task) +{ + if (perf_sw_migrate_enabled()) + task->sched_migrated = 1; +} + static inline void perf_event_task_sched_in(struct task_struct *prev, struct task_struct *task) { if (static_key_false(&perf_sched_events.key)) __perf_event_task_sched_in(prev, task); + + if (perf_sw_migrate_enabled() && task->sched_migrated) { + struct pt_regs *regs = this_cpu_ptr(&__perf_regs[0]); + + perf_fetch_caller_regs(regs); + ___perf_sw_event(PERF_COUNT_SW_CPU_MIGRATIONS, 1, regs, 0); + task->sched_migrated = 0; + } } static inline void perf_event_task_sched_out(struct task_struct *prev, @@ -925,6 +963,8 @@ perf_aux_output_skip(struct perf_output_handle *handle, static inline void * perf_get_aux(struct perf_output_handle *handle) { return NULL; } static inline void +perf_event_task_migrate(struct task_struct *task) { } +static inline void perf_event_task_sched_in(struct task_struct *prev, struct task_struct *task) { } static inline void diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index 5d50b25a73d7..cb2618147c34 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -208,9 +208,17 @@ struct omap_gpio_platform_data { int (*get_context_loss_count)(struct device *dev); }; +#if IS_BUILTIN(CONFIG_GPIO_OMAP) extern void omap2_gpio_prepare_for_idle(int off_mode); extern void omap2_gpio_resume_after_idle(void); -extern void omap_set_gpio_debounce(int gpio, int enable); -extern void omap_set_gpio_debounce_time(int gpio, int enable); +#else +static inline void omap2_gpio_prepare_for_idle(int off_mode) +{ +} + +static inline void omap2_gpio_resume_after_idle(void) +{ +} +#endif #endif diff --git a/include/linux/platform_data/irq-renesas-irqc.h b/include/linux/platform_data/irq-renesas-irqc.h deleted file mode 100644 index 3ae17b3e00ed..000000000000 --- a/include/linux/platform_data/irq-renesas-irqc.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Renesas IRQC Driver - * - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __IRQ_RENESAS_IRQC_H__ -#define __IRQ_RENESAS_IRQC_H__ - -struct renesas_irqc_config { - unsigned int irq_base; -}; - -#endif /* __IRQ_RENESAS_IRQC_H__ */ diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index 0a6de4ca4930..aed170588b74 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -27,6 +27,7 @@ enum ntc_thermistor_type { TYPE_NCPXXWB473, TYPE_NCPXXWL333, TYPE_B57330V2103, + TYPE_NCPXXWF104, }; struct ntc_thermistor_platform_data { diff --git a/include/linux/platform_data/video-msm_fb.h b/include/linux/platform_data/video-msm_fb.h deleted file mode 100644 index 31449be3eadb..000000000000 --- a/include/linux/platform_data/video-msm_fb.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Internal shared definitions for various MSM framebuffer parts. - * - * Copyright (C) 2007 Google Incorporated - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _MSM_FB_H_ -#define _MSM_FB_H_ - -#include <linux/device.h> - -struct mddi_info; - -struct msm_fb_data { - int xres; /* x resolution in pixels */ - int yres; /* y resolution in pixels */ - int width; /* disply width in mm */ - int height; /* display height in mm */ - unsigned output_format; -}; - -struct msmfb_callback { - void (*func)(struct msmfb_callback *); -}; - -enum { - MSM_MDDI_PMDH_INTERFACE, - MSM_MDDI_EMDH_INTERFACE, - MSM_EBI2_INTERFACE, -}; - -#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0) - -struct msm_panel_data { - /* turns off the fb memory */ - int (*suspend)(struct msm_panel_data *); - /* turns on the fb memory */ - int (*resume)(struct msm_panel_data *); - /* turns off the panel */ - int (*blank)(struct msm_panel_data *); - /* turns on the panel */ - int (*unblank)(struct msm_panel_data *); - void (*wait_vsync)(struct msm_panel_data *); - void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *); - void (*clear_vsync)(struct msm_panel_data *); - /* from the enum above */ - unsigned interface_type; - /* data to be passed to the fb driver */ - struct msm_fb_data *fb_data; - - /* capabilities supported by the panel */ - uint32_t caps; -}; - -struct msm_mddi_client_data { - void (*suspend)(struct msm_mddi_client_data *); - void (*resume)(struct msm_mddi_client_data *); - void (*activate_link)(struct msm_mddi_client_data *); - void (*remote_write)(struct msm_mddi_client_data *, uint32_t val, - uint32_t reg); - uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg); - void (*auto_hibernate)(struct msm_mddi_client_data *, int); - /* custom data that needs to be passed from the board file to a - * particular client */ - void *private_client_data; - struct resource *fb_resource; - /* from the list above */ - unsigned interface_type; -}; - -struct msm_mddi_platform_data { - unsigned int clk_rate; - void (*power_client)(struct msm_mddi_client_data *, int on); - - /* fixup the mfr name, product id */ - void (*fixup)(uint16_t *mfr_name, uint16_t *product_id); - - struct resource *fb_resource; /*optional*/ - /* number of clients in the list that follows */ - int num_clients; - /* array of client information of clients */ - struct { - unsigned product_id; /* mfr id in top 16 bits, product id - * in lower 16 bits - */ - char *name; /* the device name will be the platform - * device name registered for the client, - * it should match the name of the associated - * driver - */ - unsigned id; /* id for mddi client device node, will also - * be used as device id of panel devices, if - * the client device will have multiple panels - * space must be left here for them - */ - void *client_data; /* required private client data */ - unsigned int clk_rate; /* optional: if the client requires a - * different mddi clk rate - */ - } client_platform_data[]; -}; - -struct mdp_blit_req; -struct fb_info; -struct mdp_device { - struct device dev; - void (*dma)(struct mdp_device *mpd, uint32_t addr, - uint32_t stride, uint32_t w, uint32_t h, uint32_t x, - uint32_t y, struct msmfb_callback *callback, int interface); - void (*dma_wait)(struct mdp_device *mdp); - int (*blit)(struct mdp_device *mdp, struct fb_info *fb, - struct mdp_blit_req *req); - void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id); -}; - -struct class_interface; -int register_mdp_client(struct class_interface *class_intf); - -/**** private client data structs go below this line ***/ - -struct msm_mddi_bridge_platform_data { - /* from board file */ - int (*init)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - int (*uninit)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - /* passed to panel for use by the fb driver */ - int (*blank)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - int (*unblank)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - struct msm_fb_data fb_data; -}; - - - -#endif diff --git a/include/linux/pm.h b/include/linux/pm.h index 2d29c64f8fb1..35d599e7250d 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -342,6 +342,18 @@ struct dev_pm_ops { #define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) #endif +#ifdef CONFIG_PM_SLEEP +#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \ + .suspend_noirq = suspend_fn, \ + .resume_noirq = resume_fn, \ + .freeze_noirq = suspend_fn, \ + .thaw_noirq = resume_fn, \ + .poweroff_noirq = suspend_fn, \ + .restore_noirq = resume_fn, +#else +#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) +#endif + #ifdef CONFIG_PM #define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ .runtime_suspend = suspend_fn, \ @@ -529,6 +541,7 @@ enum rpm_request { }; struct wakeup_source; +struct wake_irq; struct pm_domain_data; struct pm_subsys_data { @@ -568,6 +581,7 @@ struct dev_pm_info { unsigned long timer_expires; struct work_struct work; wait_queue_head_t wait_queue; + struct wake_irq *wakeirq; atomic_t usage_count; atomic_t child_count; unsigned int disable_depth:3; diff --git a/include/linux/pm_clock.h b/include/linux/pm_clock.h index 0b0039634410..25266c600021 100644 --- a/include/linux/pm_clock.h +++ b/include/linux/pm_clock.h @@ -20,6 +20,16 @@ struct pm_clk_notifier_block { struct clk; +#ifdef CONFIG_PM +extern int pm_clk_runtime_suspend(struct device *dev); +extern int pm_clk_runtime_resume(struct device *dev); +#define USE_PM_CLK_RUNTIME_OPS \ + .runtime_suspend = pm_clk_runtime_suspend, \ + .runtime_resume = pm_clk_runtime_resume, +#else +#define USE_PM_CLK_RUNTIME_OPS +#endif + #ifdef CONFIG_PM_CLK static inline bool pm_clk_no_clocks(struct device *dev) { diff --git a/include/linux/pm_wakeirq.h b/include/linux/pm_wakeirq.h new file mode 100644 index 000000000000..cd5b62db9084 --- /dev/null +++ b/include/linux/pm_wakeirq.h @@ -0,0 +1,51 @@ +/* + * pm_wakeirq.h - Device wakeirq helper functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_PM_WAKEIRQ_H +#define _LINUX_PM_WAKEIRQ_H + +#ifdef CONFIG_PM + +extern int dev_pm_set_wake_irq(struct device *dev, int irq); +extern int dev_pm_set_dedicated_wake_irq(struct device *dev, + int irq); +extern void dev_pm_clear_wake_irq(struct device *dev); +extern void dev_pm_enable_wake_irq(struct device *dev); +extern void dev_pm_disable_wake_irq(struct device *dev); + +#else /* !CONFIG_PM */ + +static inline int dev_pm_set_wake_irq(struct device *dev, int irq) +{ + return 0; +} + +static inline int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) +{ + return 0; +} + +static inline void dev_pm_clear_wake_irq(struct device *dev) +{ +} + +static inline void dev_pm_enable_wake_irq(struct device *dev) +{ +} + +static inline void dev_pm_disable_wake_irq(struct device *dev) +{ +} + +#endif /* CONFIG_PM */ +#endif /* _LINUX_PM_WAKEIRQ_H */ diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index a0f70808d7f4..a3447932df1f 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -28,9 +28,17 @@ #include <linux/types.h> +struct wake_irq; + /** * struct wakeup_source - Representation of wakeup sources * + * @name: Name of the wakeup source + * @entry: Wakeup source list entry + * @lock: Wakeup source lock + * @wakeirq: Optional device specific wakeirq + * @timer: Wakeup timer list + * @timer_expires: Wakeup timer expiration * @total_time: Total time this wakeup source has been active. * @max_time: Maximum time this wakeup source has been continuously active. * @last_time: Monotonic clock when the wakeup source's was touched last time. @@ -47,6 +55,7 @@ struct wakeup_source { const char *name; struct list_head entry; spinlock_t lock; + struct wake_irq *wakeirq; struct timer_list timer; unsigned long timer_expires; ktime_t total_time; diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h index cf112b4075c8..522757ac9cd4 100644 --- a/include/linux/power/max17042_battery.h +++ b/include/linux/power/max17042_battery.h @@ -215,6 +215,10 @@ struct max17042_platform_data { * the datasheet although it can be changed by board designers. */ unsigned int r_sns; + int vmin; /* in millivolts */ + int vmax; /* in millivolts */ + int temp_min; /* in tenths of degree Celsius */ + int temp_max; /* in tenths of degree Celsius */ }; #endif /* __MAX17042_BATTERY_H_ */ diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 75a1dd8dc56e..ef9f1592185d 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -206,6 +206,11 @@ struct power_supply_desc { int (*set_property)(struct power_supply *psy, enum power_supply_property psp, const union power_supply_propval *val); + /* + * property_is_writeable() will be called during registration + * of power supply. If this happens during device probe then it must + * not access internal data of device (because probe did not end). + */ int (*property_is_writeable)(struct power_supply *psy, enum power_supply_property psp); void (*external_power_changed)(struct power_supply *psy); @@ -237,6 +242,7 @@ struct power_supply { /* private */ struct device dev; struct work_struct changed_work; + struct delayed_work deferred_register_work; spinlock_t changed_lock; bool changed; atomic_t use_cnt; @@ -286,10 +292,15 @@ extern void power_supply_put(struct power_supply *psy); #ifdef CONFIG_OF extern struct power_supply *power_supply_get_by_phandle(struct device_node *np, const char *property); +extern struct power_supply *devm_power_supply_get_by_phandle( + struct device *dev, const char *property); #else /* !CONFIG_OF */ static inline struct power_supply * power_supply_get_by_phandle(struct device_node *np, const char *property) { return NULL; } +static inline struct power_supply * +devm_power_supply_get_by_phandle(struct device *dev, const char *property) +{ return NULL; } #endif /* CONFIG_OF */ extern void power_supply_changed(struct power_supply *psy); extern int power_supply_am_i_supplied(struct power_supply *psy); diff --git a/include/linux/property.h b/include/linux/property.h index de8bdf417a35..76ebde9c11d4 100644 --- a/include/linux/property.h +++ b/include/linux/property.h @@ -164,4 +164,6 @@ struct property_set { void device_add_property_set(struct device *dev, struct property_set *pset); +bool device_dma_is_coherent(struct device *dev); + #endif /* _LINUX_PROPERTY_H_ */ diff --git a/include/linux/pwm.h b/include/linux/pwm.h index e90628cac8fa..36262d08a9da 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -182,6 +182,8 @@ struct pwm_chip { int pwm_set_chip_data(struct pwm_device *pwm, void *data); void *pwm_get_chip_data(struct pwm_device *pwm); +int pwmchip_add_with_polarity(struct pwm_chip *chip, + enum pwm_polarity polarity); int pwmchip_add(struct pwm_chip *chip); int pwmchip_remove(struct pwm_chip *chip); struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, @@ -217,6 +219,11 @@ static inline int pwmchip_add(struct pwm_chip *chip) return -EINVAL; } +static inline int pwmchip_add_inversed(struct pwm_chip *chip) +{ + return -EINVAL; +} + static inline int pwmchip_remove(struct pwm_chip *chip) { return -EINVAL; @@ -290,10 +297,15 @@ struct pwm_lookup { #if IS_ENABLED(CONFIG_PWM) void pwm_add_table(struct pwm_lookup *table, size_t num); +void pwm_remove_table(struct pwm_lookup *table, size_t num); #else static inline void pwm_add_table(struct pwm_lookup *table, size_t num) { } + +static inline void pwm_remove_table(struct pwm_lookup *table, size_t num) +{ +} #endif #ifdef CONFIG_PWM_SYSFS diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index dab545bb66b3..0485bab061fd 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -194,8 +194,9 @@ enum pxa_ssp_type { PXA168_SSP, PXA910_SSP, CE4100_SSP, - LPSS_SSP, QUARK_X1000_SSP, + LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */ + LPSS_BYT_SSP, }; struct ssp_device { diff --git a/include/linux/random.h b/include/linux/random.h index b05856e16b75..e651874df2c9 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -6,14 +6,23 @@ #ifndef _LINUX_RANDOM_H #define _LINUX_RANDOM_H +#include <linux/list.h> #include <uapi/linux/random.h> +struct random_ready_callback { + struct list_head list; + void (*func)(struct random_ready_callback *rdy); + struct module *owner; +}; + extern void add_device_randomness(const void *, unsigned int); extern void add_input_randomness(unsigned int type, unsigned int code, unsigned int value); extern void add_interrupt_randomness(int irq, int irq_flags); extern void get_random_bytes(void *buf, int nbytes); +extern int add_random_ready_callback(struct random_ready_callback *rdy); +extern void del_random_ready_callback(struct random_ready_callback *rdy); extern void get_random_bytes_arch(void *buf, int nbytes); void generate_random_uuid(unsigned char uuid_out[16]); extern int random_int_secret_init(void); diff --git a/include/linux/rculist.h b/include/linux/rculist.h index a18b16f1dc0e..17c6b1f84a77 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -29,8 +29,8 @@ */ static inline void INIT_LIST_HEAD_RCU(struct list_head *list) { - ACCESS_ONCE(list->next) = list; - ACCESS_ONCE(list->prev) = list; + WRITE_ONCE(list->next, list); + WRITE_ONCE(list->prev, list); } /* @@ -288,7 +288,7 @@ static inline void list_splice_init_rcu(struct list_head *list, #define list_first_or_null_rcu(ptr, type, member) \ ({ \ struct list_head *__ptr = (ptr); \ - struct list_head *__next = ACCESS_ONCE(__ptr->next); \ + struct list_head *__next = READ_ONCE(__ptr->next); \ likely(__ptr != __next) ? list_entry_rcu(__next, type, member) : NULL; \ }) @@ -549,8 +549,8 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n, */ #define hlist_for_each_entry_from_rcu(pos, member) \ for (; pos; \ - pos = hlist_entry_safe(rcu_dereference((pos)->member.next),\ - typeof(*(pos)), member)) + pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu( \ + &(pos)->member)), typeof(*(pos)), member)) #endif /* __KERNEL__ */ #endif diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 573a5afd5ed8..33a056bb886f 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -44,6 +44,8 @@ #include <linux/debugobjects.h> #include <linux/bug.h> #include <linux/compiler.h> +#include <linux/ktime.h> + #include <asm/barrier.h> extern int rcu_expedited; /* for sysctl */ @@ -292,10 +294,6 @@ void rcu_sched_qs(void); void rcu_bh_qs(void); void rcu_check_callbacks(int user); struct notifier_block; -void rcu_idle_enter(void); -void rcu_idle_exit(void); -void rcu_irq_enter(void); -void rcu_irq_exit(void); int rcu_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu); @@ -364,8 +362,8 @@ extern struct srcu_struct tasks_rcu_exit_srcu; #define rcu_note_voluntary_context_switch(t) \ do { \ rcu_all_qs(); \ - if (ACCESS_ONCE((t)->rcu_tasks_holdout)) \ - ACCESS_ONCE((t)->rcu_tasks_holdout) = false; \ + if (READ_ONCE((t)->rcu_tasks_holdout)) \ + WRITE_ONCE((t)->rcu_tasks_holdout, false); \ } while (0) #else /* #ifdef CONFIG_TASKS_RCU */ #define TASKS_RCU(x) do { } while (0) @@ -609,7 +607,7 @@ static inline void rcu_preempt_sleep_check(void) #define __rcu_access_pointer(p, space) \ ({ \ - typeof(*p) *_________p1 = (typeof(*p) *__force)ACCESS_ONCE(p); \ + typeof(*p) *_________p1 = (typeof(*p) *__force)READ_ONCE(p); \ rcu_dereference_sparse(p, space); \ ((typeof(*p) __force __kernel *)(_________p1)); \ }) @@ -628,21 +626,6 @@ static inline void rcu_preempt_sleep_check(void) ((typeof(*p) __force __kernel *)(p)); \ }) -#define __rcu_access_index(p, space) \ -({ \ - typeof(p) _________p1 = ACCESS_ONCE(p); \ - rcu_dereference_sparse(p, space); \ - (_________p1); \ -}) -#define __rcu_dereference_index_check(p, c) \ -({ \ - /* Dependency order vs. p above. */ \ - typeof(p) _________p1 = lockless_dereference(p); \ - rcu_lockdep_assert(c, \ - "suspicious rcu_dereference_index_check() usage"); \ - (_________p1); \ -}) - /** * RCU_INITIALIZER() - statically initialize an RCU-protected global variable * @v: The value to statically initialize with. @@ -659,7 +642,7 @@ static inline void rcu_preempt_sleep_check(void) */ #define lockless_dereference(p) \ ({ \ - typeof(p) _________p1 = ACCESS_ONCE(p); \ + typeof(p) _________p1 = READ_ONCE(p); \ smp_read_barrier_depends(); /* Dependency order vs. p above. */ \ (_________p1); \ }) @@ -702,7 +685,7 @@ static inline void rcu_preempt_sleep_check(void) * @p: The pointer to read * * Return the value of the specified RCU-protected pointer, but omit the - * smp_read_barrier_depends() and keep the ACCESS_ONCE(). This is useful + * smp_read_barrier_depends() and keep the READ_ONCE(). This is useful * when the value of this pointer is accessed, but the pointer is not * dereferenced, for example, when testing an RCU-protected pointer against * NULL. Although rcu_access_pointer() may also be used in cases where @@ -787,47 +770,12 @@ static inline void rcu_preempt_sleep_check(void) #define rcu_dereference_raw_notrace(p) __rcu_dereference_check((p), 1, __rcu) /** - * rcu_access_index() - fetch RCU index with no dereferencing - * @p: The index to read - * - * Return the value of the specified RCU-protected index, but omit the - * smp_read_barrier_depends() and keep the ACCESS_ONCE(). This is useful - * when the value of this index is accessed, but the index is not - * dereferenced, for example, when testing an RCU-protected index against - * -1. Although rcu_access_index() may also be used in cases where - * update-side locks prevent the value of the index from changing, you - * should instead use rcu_dereference_index_protected() for this use case. - */ -#define rcu_access_index(p) __rcu_access_index((p), __rcu) - -/** - * rcu_dereference_index_check() - rcu_dereference for indices with debug checking - * @p: The pointer to read, prior to dereferencing - * @c: The conditions under which the dereference will take place - * - * Similar to rcu_dereference_check(), but omits the sparse checking. - * This allows rcu_dereference_index_check() to be used on integers, - * which can then be used as array indices. Attempting to use - * rcu_dereference_check() on an integer will give compiler warnings - * because the sparse address-space mechanism relies on dereferencing - * the RCU-protected pointer. Dereferencing integers is not something - * that even gcc will put up with. - * - * Note that this function does not implicitly check for RCU read-side - * critical sections. If this function gains lots of uses, it might - * make sense to provide versions for each flavor of RCU, but it does - * not make sense as of early 2010. - */ -#define rcu_dereference_index_check(p, c) \ - __rcu_dereference_index_check((p), (c)) - -/** * rcu_dereference_protected() - fetch RCU pointer when updates prevented * @p: The pointer to read, prior to dereferencing * @c: The conditions under which the dereference will take place * * Return the value of the specified RCU-protected pointer, but omit - * both the smp_read_barrier_depends() and the ACCESS_ONCE(). This + * both the smp_read_barrier_depends() and the READ_ONCE(). This * is useful in cases where update-side locks prevent the value of the * pointer from changing. Please note that this primitive does -not- * prevent the compiler from repeating this reference or combining it @@ -1153,13 +1101,13 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) #define kfree_rcu(ptr, rcu_head) \ __kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head)) -#if defined(CONFIG_TINY_RCU) || defined(CONFIG_RCU_NOCB_CPU_ALL) -static inline int rcu_needs_cpu(unsigned long *delta_jiffies) +#ifdef CONFIG_TINY_RCU +static inline int rcu_needs_cpu(u64 basemono, u64 *nextevt) { - *delta_jiffies = ULONG_MAX; + *nextevt = KTIME_MAX; return 0; } -#endif /* #if defined(CONFIG_TINY_RCU) || defined(CONFIG_RCU_NOCB_CPU_ALL) */ +#endif /* #ifdef CONFIG_TINY_RCU */ #if defined(CONFIG_RCU_NOCB_CPU_ALL) static inline bool rcu_is_nocb_cpu(int cpu) { return true; } diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h index 937edaeb150d..3df6c1ec4e25 100644 --- a/include/linux/rcutiny.h +++ b/include/linux/rcutiny.h @@ -159,6 +159,22 @@ static inline void rcu_cpu_stall_reset(void) { } +static inline void rcu_idle_enter(void) +{ +} + +static inline void rcu_idle_exit(void) +{ +} + +static inline void rcu_irq_enter(void) +{ +} + +static inline void rcu_irq_exit(void) +{ +} + static inline void exit_rcu(void) { } diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index d2e583a6aaca..456879143f89 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -31,9 +31,7 @@ #define __LINUX_RCUTREE_H void rcu_note_context_switch(void); -#ifndef CONFIG_RCU_NOCB_CPU_ALL -int rcu_needs_cpu(unsigned long *delta_jiffies); -#endif /* #ifndef CONFIG_RCU_NOCB_CPU_ALL */ +int rcu_needs_cpu(u64 basem, u64 *nextevt); void rcu_cpu_stall_reset(void); /* @@ -93,6 +91,11 @@ void rcu_force_quiescent_state(void); void rcu_bh_force_quiescent_state(void); void rcu_sched_force_quiescent_state(void); +void rcu_idle_enter(void); +void rcu_idle_exit(void); +void rcu_irq_enter(void); +void rcu_irq_exit(void); + void exit_rcu(void); void rcu_scheduler_starting(void); diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 116655d92269..59c55ea0f0b5 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -433,6 +433,8 @@ int regmap_update_bits_check_async(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val, bool *change); int regmap_get_val_bytes(struct regmap *map); +int regmap_get_max_register(struct regmap *map); +int regmap_get_reg_stride(struct regmap *map); int regmap_async_complete(struct regmap *map); bool regmap_can_raw_write(struct regmap *map); @@ -676,6 +678,18 @@ static inline int regmap_get_val_bytes(struct regmap *map) return -EINVAL; } +static inline int regmap_get_max_register(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_get_reg_stride(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regcache_sync(struct regmap *map) { WARN_ONCE(1, "regmap API is disabled"); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index fffa688ac3a7..4db9fbe4889d 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -91,6 +91,7 @@ struct regulator_linear_range { * @set_current_limit: Configure a limit for a current-limited regulator. * The driver should select the current closest to max_uA. * @get_current_limit: Get the configured limit for a current-limited regulator. + * @set_input_current_limit: Configure an input limit. * * @set_mode: Set the configured operating mode for the regulator. * @get_mode: Get the configured operating mode for the regulator. @@ -111,6 +112,7 @@ struct regulator_linear_range { * to stabilise after being set to a new value, in microseconds. * The function provides the from and to voltage selector, the * function should return the worst case. + * @set_soft_start: Enable soft start for the regulator. * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. @@ -121,6 +123,9 @@ struct regulator_linear_range { * @set_suspend_mode: Set the operating mode for the regulator when the * system is suspended. * + * @set_pull_down: Configure the regulator to pull down when the regulator + * is disabled. + * * This struct describes regulator operations which can be implemented by * regulator chip drivers. */ @@ -142,6 +147,8 @@ struct regulator_ops { int min_uA, int max_uA); int (*get_current_limit) (struct regulator_dev *); + int (*set_input_current_limit) (struct regulator_dev *, int lim_uA); + /* enable/disable regulator */ int (*enable) (struct regulator_dev *); int (*disable) (struct regulator_dev *); @@ -158,6 +165,8 @@ struct regulator_ops { unsigned int old_selector, unsigned int new_selector); + int (*set_soft_start) (struct regulator_dev *); + /* report regulator status ... most other accessors report * control inputs, this reports results of combining inputs * from Linux (and other sources) with the actual load. @@ -187,6 +196,8 @@ struct regulator_ops { /* set regulator suspend operating mode (defined in consumer.h) */ int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode); + + int (*set_pull_down) (struct regulator_dev *); }; /* diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index b07562e082c4..b11be1260129 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -75,6 +75,8 @@ struct regulator_state { * * @min_uA: Smallest current consumers may set. * @max_uA: Largest current consumers may set. + * @ilim_uA: Maximum input current. + * @system_load: Load that isn't captured by any consumer requests. * * @valid_modes_mask: Mask of modes which may be configured by consumers. * @valid_ops_mask: Operations which may be performed by consumers. @@ -86,6 +88,8 @@ struct regulator_state { * applied. * @apply_uV: Apply the voltage constraint when initialising. * @ramp_disable: Disable ramp delay when initialising or when setting voltage. + * @soft_start: Enable soft start so that voltage ramps slowly. + * @pull_down: Enable pull down when regulator is disabled. * * @input_uV: Input voltage for regulator when supplied by another regulator. * @@ -111,6 +115,9 @@ struct regulation_constraints { /* current output range (inclusive) - for current control */ int min_uA; int max_uA; + int ilim_uA; + + int system_load; /* valid regulator operating modes for this machine */ unsigned int valid_modes_mask; @@ -138,6 +145,8 @@ struct regulation_constraints { unsigned boot_on:1; /* bootloader/firmware enabled regulator */ unsigned apply_uV:1; /* apply uV constraint if min == max */ unsigned ramp_disable:1; /* disable ramp delay */ + unsigned soft_start:1; /* ramp voltage slowly */ + unsigned pull_down:1; /* pull down resistor when regulator off */ }; /** diff --git a/include/linux/regulator/max8973-regulator.h b/include/linux/regulator/max8973-regulator.h index f8acc052e353..f6a8a16a0d4d 100644 --- a/include/linux/regulator/max8973-regulator.h +++ b/include/linux/regulator/max8973-regulator.h @@ -58,6 +58,9 @@ * control signal from EN input pin. If it is false then * voltage output will be enabled/disabled through EN bit of * device register. + * @enable_gpio: Enable GPIO. If EN pin is controlled through GPIO from host + * then GPIO number can be provided. If no GPIO controlled then + * it should be -1. * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic. * @dvs_def_state: Default state of dvs. 1 if it is high else 0. */ @@ -65,6 +68,7 @@ struct max8973_regulator_platform_data { struct regulator_init_data *reg_init_data; unsigned long control_flags; bool enable_ext_control; + int enable_gpio; int dvs_gpio; unsigned dvs_def_state:1; }; diff --git a/include/linux/rio.h b/include/linux/rio.h index 6bda06f21930..cde976e86b48 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -298,7 +298,7 @@ struct rio_id_table { * struct rio_net - RIO network info * @node: Node in global list of RIO networks * @devices: List of devices in this network - * @switches: List of switches in this netowrk + * @switches: List of switches in this network * @mports: List of master ports accessing this network * @hport: Default port for accessing this network * @id: RIO network ID diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index ed8f9e70df9b..a0edb992c9c3 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -221,6 +221,7 @@ static inline void *sg_virt(struct scatterlist *sg) } int sg_nents(struct scatterlist *sg); +int sg_nents_for_len(struct scatterlist *sg, u64 len); struct scatterlist *sg_next(struct scatterlist *); struct scatterlist *sg_last(struct scatterlist *s, unsigned int); void sg_init_table(struct scatterlist *, unsigned int); diff --git a/include/linux/sched.h b/include/linux/sched.h index 7de815c6fa78..6633e83e608a 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -132,6 +132,7 @@ struct fs_struct; struct perf_event_context; struct blk_plug; struct filename; +struct nameidata; #define VMACACHE_BITS 2 #define VMACACHE_SIZE (1U << VMACACHE_BITS) @@ -261,7 +262,7 @@ extern char ___assert_task_state[1 - 2*!!( #define set_task_state(tsk, state_value) \ do { \ (tsk)->task_state_change = _THIS_IP_; \ - set_mb((tsk)->state, (state_value)); \ + smp_store_mb((tsk)->state, (state_value)); \ } while (0) /* @@ -283,7 +284,7 @@ extern char ___assert_task_state[1 - 2*!!( #define set_current_state(state_value) \ do { \ current->task_state_change = _THIS_IP_; \ - set_mb(current->state, (state_value)); \ + smp_store_mb(current->state, (state_value)); \ } while (0) #else @@ -291,7 +292,7 @@ extern char ___assert_task_state[1 - 2*!!( #define __set_task_state(tsk, state_value) \ do { (tsk)->state = (state_value); } while (0) #define set_task_state(tsk, state_value) \ - set_mb((tsk)->state, (state_value)) + smp_store_mb((tsk)->state, (state_value)) /* * set_current_state() includes a barrier so that the write of current->state @@ -307,7 +308,7 @@ extern char ___assert_task_state[1 - 2*!!( #define __set_current_state(state_value) \ do { current->state = (state_value); } while (0) #define set_current_state(state_value) \ - set_mb(current->state, (state_value)) + smp_store_mb(current->state, (state_value)) #endif @@ -344,14 +345,10 @@ extern int runqueue_is_locked(int cpu); #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON) extern void nohz_balance_enter_idle(int cpu); extern void set_cpu_sd_state_idle(void); -extern int get_nohz_timer_target(int pinned); +extern int get_nohz_timer_target(void); #else static inline void nohz_balance_enter_idle(int cpu) { } static inline void set_cpu_sd_state_idle(void) { } -static inline int get_nohz_timer_target(int pinned) -{ - return smp_processor_id(); -} #endif /* @@ -1422,9 +1419,6 @@ struct task_struct { #endif struct mm_struct *mm, *active_mm; -#ifdef CONFIG_COMPAT_BRK - unsigned brk_randomized:1; -#endif /* per-thread vma caching */ u32 vmacache_seqnum; struct vm_area_struct *vmacache[VMACACHE_SIZE]; @@ -1447,10 +1441,14 @@ struct task_struct { /* Revert to default priority/policy when forking */ unsigned sched_reset_on_fork:1; unsigned sched_contributes_to_load:1; + unsigned sched_migrated:1; #ifdef CONFIG_MEMCG_KMEM unsigned memcg_kmem_skip_account:1; #endif +#ifdef CONFIG_COMPAT_BRK + unsigned brk_randomized:1; +#endif unsigned long atomic_flags; /* Flags needing atomic access. */ @@ -1527,7 +1525,7 @@ struct task_struct { it with task_lock()) - initialized normally by setup_new_exec */ /* file system info */ - int link_count, total_link_count; + struct nameidata *nameidata; #ifdef CONFIG_SYSVIPC /* ipc stuff */ struct sysv_sem sysvsem; @@ -2601,6 +2599,9 @@ static inline unsigned long wait_task_inactive(struct task_struct *p, } #endif +#define tasklist_empty() \ + list_empty(&init_task.tasks) + #define next_task(p) \ list_entry_rcu((p)->tasks.next, struct task_struct, tasks) diff --git a/include/linux/sched/sysctl.h b/include/linux/sched/sysctl.h index 596a0e007c62..c9e4731cf10b 100644 --- a/include/linux/sched/sysctl.h +++ b/include/linux/sched/sysctl.h @@ -57,24 +57,12 @@ extern unsigned int sysctl_numa_balancing_scan_size; extern unsigned int sysctl_sched_migration_cost; extern unsigned int sysctl_sched_nr_migrate; extern unsigned int sysctl_sched_time_avg; -extern unsigned int sysctl_timer_migration; extern unsigned int sysctl_sched_shares_window; int sched_proc_update_handler(struct ctl_table *table, int write, void __user *buffer, size_t *length, loff_t *ppos); #endif -#ifdef CONFIG_SCHED_DEBUG -static inline unsigned int get_sysctl_timer_migration(void) -{ - return sysctl_timer_migration; -} -#else -static inline unsigned int get_sysctl_timer_migration(void) -{ - return 1; -} -#endif /* * control realtime throttling: diff --git a/include/linux/security.h b/include/linux/security.h index 18264ea9e314..52febde52479 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -43,7 +43,6 @@ struct file; struct vfsmount; struct path; struct qstr; -struct nameidata; struct iattr; struct fown_struct; struct file_operations; @@ -477,7 +476,8 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * @inode_follow_link: * Check permission to follow a symbolic link when looking up a pathname. * @dentry contains the dentry structure for the link. - * @nd contains the nameidata structure for the parent directory. + * @inode contains the inode, which itself is not stable in RCU-walk + * @rcu indicates whether we are in RCU-walk mode. * Return 0 if permission is granted. * @inode_permission: * Check permission before accessing an inode. This hook is called by the @@ -1553,7 +1553,8 @@ struct security_operations { int (*inode_rename) (struct inode *old_dir, struct dentry *old_dentry, struct inode *new_dir, struct dentry *new_dentry); int (*inode_readlink) (struct dentry *dentry); - int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd); + int (*inode_follow_link) (struct dentry *dentry, struct inode *inode, + bool rcu); int (*inode_permission) (struct inode *inode, int mask); int (*inode_setattr) (struct dentry *dentry, struct iattr *attr); int (*inode_getattr) (const struct path *path); @@ -1839,7 +1840,8 @@ int security_inode_rename(struct inode *old_dir, struct dentry *old_dentry, struct inode *new_dir, struct dentry *new_dentry, unsigned int flags); int security_inode_readlink(struct dentry *dentry); -int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd); +int security_inode_follow_link(struct dentry *dentry, struct inode *inode, + bool rcu); int security_inode_permission(struct inode *inode, int mask); int security_inode_setattr(struct dentry *dentry, struct iattr *attr); int security_inode_getattr(const struct path *path); @@ -2242,7 +2244,8 @@ static inline int security_inode_readlink(struct dentry *dentry) } static inline int security_inode_follow_link(struct dentry *dentry, - struct nameidata *nd) + struct inode *inode, + bool rcu) { return 0; } diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h index 5f68d0a391ce..486e685a226a 100644 --- a/include/linux/seqlock.h +++ b/include/linux/seqlock.h @@ -233,6 +233,47 @@ static inline void raw_write_seqcount_end(seqcount_t *s) s->sequence++; } +/** + * raw_write_seqcount_barrier - do a seq write barrier + * @s: pointer to seqcount_t + * + * This can be used to provide an ordering guarantee instead of the + * usual consistency guarantee. It is one wmb cheaper, because we can + * collapse the two back-to-back wmb()s. + * + * seqcount_t seq; + * bool X = true, Y = false; + * + * void read(void) + * { + * bool x, y; + * + * do { + * int s = read_seqcount_begin(&seq); + * + * x = X; y = Y; + * + * } while (read_seqcount_retry(&seq, s)); + * + * BUG_ON(!x && !y); + * } + * + * void write(void) + * { + * Y = true; + * + * raw_write_seqcount_barrier(seq); + * + * X = false; + * } + */ +static inline void raw_write_seqcount_barrier(seqcount_t *s) +{ + s->sequence++; + smp_wmb(); + s->sequence++; +} + /* * raw_write_seqcount_latch - redirect readers to even/odd copy * @s: pointer to seqcount_t @@ -266,13 +307,13 @@ static inline void write_seqcount_end(seqcount_t *s) } /** - * write_seqcount_barrier - invalidate in-progress read-side seq operations + * write_seqcount_invalidate - invalidate in-progress read-side seq operations * @s: pointer to seqcount_t * - * After write_seqcount_barrier, no read-side seq operations will complete + * After write_seqcount_invalidate, no read-side seq operations will complete * successfully and see data older than this. */ -static inline void write_seqcount_barrier(seqcount_t *s) +static inline void write_seqcount_invalidate(seqcount_t *s) { smp_wmb(); s->sequence+=2; diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 3e18379dfa6f..0063b24b4f36 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -120,7 +120,7 @@ do { \ /* * Despite its name it doesn't necessarily has to be a full barrier. * It should only guarantee that a STORE before the critical section - * can not be reordered with a LOAD inside this section. + * can not be reordered with LOADs and STOREs inside this section. * spin_lock() is the one-way barrier, this LOAD can not escape out * of the region. So the default implementation simply ensures that * a STORE can not move into the critical section, smp_wmb() should diff --git a/include/linux/sw842.h b/include/linux/sw842.h new file mode 100644 index 000000000000..109ba041c2ae --- /dev/null +++ b/include/linux/sw842.h @@ -0,0 +1,12 @@ +#ifndef __SW842_H__ +#define __SW842_H__ + +#define SW842_MEM_COMPRESS (0xf000) + +int sw842_compress(const u8 *src, unsigned int srclen, + u8 *dst, unsigned int *destlen, void *wmem); + +int sw842_decompress(const u8 *src, unsigned int srclen, + u8 *dst, unsigned int *destlen); + +#endif diff --git a/include/linux/tick.h b/include/linux/tick.h index f8492da57ad3..3741ba1a652c 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -13,8 +13,6 @@ #ifdef CONFIG_GENERIC_CLOCKEVENTS extern void __init tick_init(void); -extern void tick_freeze(void); -extern void tick_unfreeze(void); /* Should be core only, but ARM BL switcher requires it */ extern void tick_suspend_local(void); /* Should be core only, but XEN resume magic and ARM BL switcher require it */ @@ -23,14 +21,20 @@ extern void tick_handover_do_timer(void); extern void tick_cleanup_dead_cpu(int cpu); #else /* CONFIG_GENERIC_CLOCKEVENTS */ static inline void tick_init(void) { } -static inline void tick_freeze(void) { } -static inline void tick_unfreeze(void) { } static inline void tick_suspend_local(void) { } static inline void tick_resume_local(void) { } static inline void tick_handover_do_timer(void) { } static inline void tick_cleanup_dead_cpu(int cpu) { } #endif /* !CONFIG_GENERIC_CLOCKEVENTS */ +#if defined(CONFIG_GENERIC_CLOCKEVENTS) && defined(CONFIG_SUSPEND) +extern void tick_freeze(void); +extern void tick_unfreeze(void); +#else +static inline void tick_freeze(void) { } +static inline void tick_unfreeze(void) { } +#endif + #ifdef CONFIG_TICK_ONESHOT extern void tick_irq_enter(void); # ifndef arch_needs_cpu @@ -134,6 +138,12 @@ static inline bool tick_nohz_full_cpu(int cpu) return cpumask_test_cpu(cpu, tick_nohz_full_mask); } +static inline void tick_nohz_full_add_cpus_to(struct cpumask *mask) +{ + if (tick_nohz_full_enabled()) + cpumask_or(mask, mask, tick_nohz_full_mask); +} + extern void __tick_nohz_full_check(void); extern void tick_nohz_full_kick(void); extern void tick_nohz_full_kick_cpu(int cpu); @@ -142,6 +152,7 @@ extern void __tick_nohz_task_switch(struct task_struct *tsk); #else static inline bool tick_nohz_full_enabled(void) { return false; } static inline bool tick_nohz_full_cpu(int cpu) { return false; } +static inline void tick_nohz_full_add_cpus_to(struct cpumask *mask) { } static inline void __tick_nohz_full_check(void) { } static inline void tick_nohz_full_kick_cpu(int cpu) { } static inline void tick_nohz_full_kick(void) { } diff --git a/include/linux/time64.h b/include/linux/time64.h index a3831478d9cf..77b5df2acd2a 100644 --- a/include/linux/time64.h +++ b/include/linux/time64.h @@ -2,6 +2,7 @@ #define _LINUX_TIME64_H #include <uapi/linux/time.h> +#include <linux/math64.h> typedef __s64 time64_t; @@ -28,6 +29,7 @@ struct timespec64 { #define FSEC_PER_SEC 1000000000000000LL /* Located here for timespec[64]_valid_strict */ +#define TIME64_MAX ((s64)~((u64)1 << 63)) #define KTIME_MAX ((s64)~((u64)1 << 63)) #define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) diff --git a/include/linux/timekeeper_internal.h b/include/linux/timekeeper_internal.h index fb86963859c7..25247220b4b7 100644 --- a/include/linux/timekeeper_internal.h +++ b/include/linux/timekeeper_internal.h @@ -49,6 +49,8 @@ struct tk_read_base { * @offs_boot: Offset clock monotonic -> clock boottime * @offs_tai: Offset clock monotonic -> clock tai * @tai_offset: The current UTC to TAI offset in seconds + * @clock_was_set_seq: The sequence number of clock was set events + * @next_leap_ktime: CLOCK_MONOTONIC time value of a pending leap-second * @raw_time: Monotonic raw base time in timespec64 format * @cycle_interval: Number of clock cycles in one NTP interval * @xtime_interval: Number of clock shifted nano seconds in one NTP @@ -60,6 +62,9 @@ struct tk_read_base { * shifted nano seconds. * @ntp_error_shift: Shift conversion between clock shifted nano seconds and * ntp shifted nano seconds. + * @last_warning: Warning ratelimiter (DEBUG_TIMEKEEPING) + * @underflow_seen: Underflow warning flag (DEBUG_TIMEKEEPING) + * @overflow_seen: Overflow warning flag (DEBUG_TIMEKEEPING) * * Note: For timespec(64) based interfaces wall_to_monotonic is what * we need to add to xtime (or xtime corrected for sub jiffie times) @@ -85,6 +90,8 @@ struct timekeeper { ktime_t offs_boot; ktime_t offs_tai; s32 tai_offset; + unsigned int clock_was_set_seq; + ktime_t next_leap_ktime; struct timespec64 raw_time; /* The following members are for timekeeping internal use */ @@ -104,6 +111,18 @@ struct timekeeper { s64 ntp_error; u32 ntp_error_shift; u32 ntp_err_mult; +#ifdef CONFIG_DEBUG_TIMEKEEPING + long last_warning; + /* + * These simple flag variables are managed + * without locks, which is racy, but they are + * ok since we don't really care about being + * super precise about how many events were + * seen, just that a problem was observed. + */ + int underflow_seen; + int overflow_seen; +#endif }; #ifdef CONFIG_GENERIC_TIME_VSYSCALL diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h index 99176af216af..3aa72e648650 100644 --- a/include/linux/timekeeping.h +++ b/include/linux/timekeeping.h @@ -163,6 +163,7 @@ extern ktime_t ktime_get(void); extern ktime_t ktime_get_with_offset(enum tk_offsets offs); extern ktime_t ktime_mono_to_any(ktime_t tmono, enum tk_offsets offs); extern ktime_t ktime_get_raw(void); +extern u32 ktime_get_resolution_ns(void); /** * ktime_get_real - get the real (wall-) time in ktime_t format @@ -266,7 +267,6 @@ extern int persistent_clock_is_local; extern void read_persistent_clock(struct timespec *ts); extern void read_persistent_clock64(struct timespec64 *ts); -extern void read_boot_clock(struct timespec *ts); extern void read_boot_clock64(struct timespec64 *ts); extern int update_persistent_clock(struct timespec now); extern int update_persistent_clock64(struct timespec64 now); diff --git a/include/linux/timer.h b/include/linux/timer.h index 8c5a197e1587..61aa61dc410c 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -14,27 +14,23 @@ struct timer_list { * All fields that change during normal runtime grouped to the * same cacheline */ - struct list_head entry; - unsigned long expires; - struct tvec_base *base; - - void (*function)(unsigned long); - unsigned long data; - - int slack; + struct hlist_node entry; + unsigned long expires; + void (*function)(unsigned long); + unsigned long data; + u32 flags; + int slack; #ifdef CONFIG_TIMER_STATS - int start_pid; - void *start_site; - char start_comm[16]; + int start_pid; + void *start_site; + char start_comm[16]; #endif #ifdef CONFIG_LOCKDEP - struct lockdep_map lockdep_map; + struct lockdep_map lockdep_map; #endif }; -extern struct tvec_base boot_tvec_bases; - #ifdef CONFIG_LOCKDEP /* * NB: because we have to copy the lockdep_map, setting the lockdep_map key @@ -49,9 +45,6 @@ extern struct tvec_base boot_tvec_bases; #endif /* - * Note that all tvec_bases are at least 4 byte aligned and lower two bits - * of base in timer_list is guaranteed to be zero. Use them for flags. - * * A deferrable timer will work normally when the system is busy, but * will not cause a CPU to come out of idle just to service it; instead, * the timer will be serviced when the CPU eventually wakes up with a @@ -65,17 +58,18 @@ extern struct tvec_base boot_tvec_bases; * workqueue locking issues. It's not meant for executing random crap * with interrupts disabled. Abuse is monitored! */ -#define TIMER_DEFERRABLE 0x1LU -#define TIMER_IRQSAFE 0x2LU - -#define TIMER_FLAG_MASK 0x3LU +#define TIMER_CPUMASK 0x0007FFFF +#define TIMER_MIGRATING 0x00080000 +#define TIMER_BASEMASK (TIMER_CPUMASK | TIMER_MIGRATING) +#define TIMER_DEFERRABLE 0x00100000 +#define TIMER_IRQSAFE 0x00200000 #define __TIMER_INITIALIZER(_function, _expires, _data, _flags) { \ - .entry = { .prev = TIMER_ENTRY_STATIC }, \ + .entry = { .next = TIMER_ENTRY_STATIC }, \ .function = (_function), \ .expires = (_expires), \ .data = (_data), \ - .base = (void *)((unsigned long)&boot_tvec_bases + (_flags)), \ + .flags = (_flags), \ .slack = -1, \ __TIMER_LOCKDEP_MAP_INITIALIZER( \ __FILE__ ":" __stringify(__LINE__)) \ @@ -168,7 +162,7 @@ static inline void init_timer_on_stack_key(struct timer_list *timer, */ static inline int timer_pending(const struct timer_list * timer) { - return timer->entry.next != NULL; + return timer->entry.pprev != NULL; } extern void add_timer_on(struct timer_list *timer, int cpu); @@ -188,26 +182,16 @@ extern void set_timer_slack(struct timer_list *time, int slack_hz); #define NEXT_TIMER_MAX_DELTA ((1UL << 30) - 1) /* - * Return when the next timer-wheel timeout occurs (in absolute jiffies), - * locks the timer base and does the comparison against the given - * jiffie. - */ -extern unsigned long get_next_timer_interrupt(unsigned long now); - -/* * Timer-statistics info: */ #ifdef CONFIG_TIMER_STATS extern int timer_stats_active; -#define TIMER_STATS_FLAG_DEFERRABLE 0x1 - extern void init_timer_stats(void); extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf, - void *timerf, char *comm, - unsigned int timer_flag); + void *timerf, char *comm, u32 flags); extern void __timer_stats_timer_set_start_info(struct timer_list *timer, void *addr); @@ -254,6 +238,15 @@ extern void run_local_timers(void); struct hrtimer; extern enum hrtimer_restart it_real_fn(struct hrtimer *); +#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON) +#include <linux/sysctl.h> + +extern unsigned int sysctl_timer_migration; +int timer_migration_handler(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos); +#endif + unsigned long __round_jiffies(unsigned long j, int cpu); unsigned long __round_jiffies_relative(unsigned long j, int cpu); unsigned long round_jiffies(unsigned long j); diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h index a520fd70a59f..7eec17ad7fa1 100644 --- a/include/linux/timerqueue.h +++ b/include/linux/timerqueue.h @@ -16,10 +16,10 @@ struct timerqueue_head { }; -extern void timerqueue_add(struct timerqueue_head *head, - struct timerqueue_node *node); -extern void timerqueue_del(struct timerqueue_head *head, - struct timerqueue_node *node); +extern bool timerqueue_add(struct timerqueue_head *head, + struct timerqueue_node *node); +extern bool timerqueue_del(struct timerqueue_head *head, + struct timerqueue_node *node); extern struct timerqueue_node *timerqueue_iterate_next( struct timerqueue_node *node); diff --git a/include/linux/types.h b/include/linux/types.h index 59698be03490..8715287c3b1f 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -139,12 +139,20 @@ typedef unsigned long blkcnt_t; */ #define pgoff_t unsigned long -/* A dma_addr_t can hold any valid DMA or bus address for the platform */ +/* + * A dma_addr_t can hold any valid DMA address, i.e., any address returned + * by the DMA API. + * + * If the DMA API only uses 32-bit addresses, dma_addr_t need only be 32 + * bits wide. Bus addresses, e.g., PCI BARs, may be wider than 32 bits, + * but drivers do memory-mapped I/O to ioremapped kernel virtual addresses, + * so they don't care about the size of the actual bus addresses. + */ #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT typedef u64 dma_addr_t; #else typedef u32 dma_addr_t; -#endif /* dma_addr_t */ +#endif typedef unsigned __bitwise__ gfp_t; typedef unsigned __bitwise__ fmode_t; diff --git a/include/misc/cxl-base.h b/include/misc/cxl-base.h new file mode 100644 index 000000000000..5ae962512fb8 --- /dev/null +++ b/include/misc/cxl-base.h @@ -0,0 +1,48 @@ +/* + * Copyright 2014 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _MISC_CXL_BASE_H +#define _MISC_CXL_BASE_H + +#ifdef CONFIG_CXL_BASE + +#define CXL_IRQ_RANGES 4 + +struct cxl_irq_ranges { + irq_hw_number_t offset[CXL_IRQ_RANGES]; + irq_hw_number_t range[CXL_IRQ_RANGES]; +}; + +extern atomic_t cxl_use_count; + +static inline bool cxl_ctx_in_use(void) +{ + return (atomic_read(&cxl_use_count) != 0); +} + +static inline void cxl_ctx_get(void) +{ + atomic_inc(&cxl_use_count); +} + +static inline void cxl_ctx_put(void) +{ + atomic_dec(&cxl_use_count); +} + +void cxl_slbia(struct mm_struct *mm); + +#else /* CONFIG_CXL_BASE */ + +static inline bool cxl_ctx_in_use(void) { return false; } +static inline void cxl_slbia(struct mm_struct *mm) {} + +#endif /* CONFIG_CXL_BASE */ + +#endif diff --git a/include/misc/cxl.h b/include/misc/cxl.h index 975cc7861f18..7a6c1d6cc173 100644 --- a/include/misc/cxl.h +++ b/include/misc/cxl.h @@ -1,5 +1,5 @@ /* - * Copyright 2014 IBM Corp. + * Copyright 2015 IBM Corp. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -10,39 +10,194 @@ #ifndef _MISC_CXL_H #define _MISC_CXL_H -#ifdef CONFIG_CXL_BASE +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/interrupt.h> +#include <uapi/misc/cxl.h> -#define CXL_IRQ_RANGES 4 +/* + * This documents the in kernel API for driver to use CXL. It allows kernel + * drivers to bind to AFUs using an AFU configuration record exposed as a PCI + * configuration record. + * + * This API enables control over AFU and contexts which can't be part of the + * generic PCI API. This API is agnostic to the actual AFU. + */ + +/* Get the AFU associated with a pci_dev */ +struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev); + +/* Get the AFU conf record number associated with a pci_dev */ +unsigned int cxl_pci_to_cfg_record(struct pci_dev *dev); + +/* Get the physical device (ie. the PCIe card) which the AFU is attached */ +struct device *cxl_get_phys_dev(struct pci_dev *dev); + + +/* + * Context lifetime overview: + * + * An AFU context may be inited and then started and stoppped multiple times + * before it's released. ie. + * - cxl_dev_context_init() + * - cxl_start_context() + * - cxl_stop_context() + * - cxl_start_context() + * - cxl_stop_context() + * ...repeat... + * - cxl_release_context() + * Once released, a context can't be started again. + * + * One context is inited by the cxl driver for every pci_dev. This is to be + * used as a default kernel context. cxl_get_context() will get this + * context. This context will be released by PCI hot unplug, so doesn't need to + * be released explicitly by drivers. + * + * Additional kernel contexts may be inited using cxl_dev_context_init(). + * These must be released using cxl_context_detach(). + * + * Once a context has been inited, IRQs may be configured. Firstly these IRQs + * must be allocated (cxl_allocate_afu_irqs()), then individually mapped to + * specific handlers (cxl_map_afu_irq()). + * + * These IRQs can be unmapped (cxl_unmap_afu_irq()) and finally released + * (cxl_free_afu_irqs()). + * + * The AFU can be reset (cxl_afu_reset()). This will cause the PSL/AFU + * hardware to lose track of all contexts. It's upto the caller of + * cxl_afu_reset() to restart these contexts. + */ + +/* + * On pci_enabled_device(), the cxl driver will init a single cxl context for + * use by the driver. It doesn't start this context (as that will likely + * generate DMA traffic for most AFUs). + * + * This gets the default context associated with this pci_dev. This context + * doesn't need to be released as this will be done by the PCI subsystem on hot + * unplug. + */ +struct cxl_context *cxl_get_context(struct pci_dev *dev); +/* + * Allocate and initalise a context associated with a AFU PCI device. This + * doesn't start the context in the AFU. + */ +struct cxl_context *cxl_dev_context_init(struct pci_dev *dev); +/* + * Release and free a context. Context should be stopped before calling. + */ +int cxl_release_context(struct cxl_context *ctx); -struct cxl_irq_ranges { - irq_hw_number_t offset[CXL_IRQ_RANGES]; - irq_hw_number_t range[CXL_IRQ_RANGES]; -}; +/* + * Allocate AFU interrupts for this context. num=0 will allocate the default + * for this AFU as given in the AFU descriptor. This number doesn't include the + * interrupt 0 (CAIA defines AFU IRQ 0 for page faults). Each interrupt to be + * used must map a handler with cxl_map_afu_irq. + */ +int cxl_allocate_afu_irqs(struct cxl_context *cxl, int num); +/* Free allocated interrupts */ +void cxl_free_afu_irqs(struct cxl_context *cxl); + +/* + * Map a handler for an AFU interrupt associated with a particular context. AFU + * IRQS numbers start from 1 (CAIA defines AFU IRQ 0 for page faults). cookie + * is private data is that will be provided to the interrupt handler. + */ +int cxl_map_afu_irq(struct cxl_context *cxl, int num, + irq_handler_t handler, void *cookie, char *name); +/* unmap mapped IRQ handlers */ +void cxl_unmap_afu_irq(struct cxl_context *cxl, int num, void *cookie); -extern atomic_t cxl_use_count; +/* + * Start work on the AFU. This starts an cxl context and associates it with a + * task. task == NULL will make it a kernel context. + */ +int cxl_start_context(struct cxl_context *ctx, u64 wed, + struct task_struct *task); +/* + * Stop a context and remove it from the PSL + */ +int cxl_stop_context(struct cxl_context *ctx); -static inline bool cxl_ctx_in_use(void) -{ - return (atomic_read(&cxl_use_count) != 0); -} +/* Reset the AFU */ +int cxl_afu_reset(struct cxl_context *ctx); -static inline void cxl_ctx_get(void) -{ - atomic_inc(&cxl_use_count); -} +/* + * Set a context as a master context. + * This sets the default problem space area mapped as the full space, rather + * than just the per context area (for slaves). + */ +void cxl_set_master(struct cxl_context *ctx); -static inline void cxl_ctx_put(void) -{ - atomic_dec(&cxl_use_count); -} +/* + * Map and unmap the AFU Problem Space area. The amount and location mapped + * depends on if this context is a master or slave. + */ +void __iomem *cxl_psa_map(struct cxl_context *ctx); +void cxl_psa_unmap(void __iomem *addr); -void cxl_slbia(struct mm_struct *mm); +/* Get the process element for this context */ +int cxl_process_element(struct cxl_context *ctx); -#else /* CONFIG_CXL_BASE */ -static inline bool cxl_ctx_in_use(void) { return false; } -static inline void cxl_slbia(struct mm_struct *mm) {} +/* + * These calls allow drivers to create their own file descriptors and make them + * identical to the cxl file descriptor user API. An example use case: + * + * struct file_operations cxl_my_fops = {}; + * ...... + * // Init the context + * ctx = cxl_dev_context_init(dev); + * if (IS_ERR(ctx)) + * return PTR_ERR(ctx); + * // Create and attach a new file descriptor to my file ops + * file = cxl_get_fd(ctx, &cxl_my_fops, &fd); + * // Start context + * rc = cxl_start_work(ctx, &work.work); + * if (rc) { + * fput(file); + * put_unused_fd(fd); + * return -ENODEV; + * } + * // No error paths after installing the fd + * fd_install(fd, file); + * return fd; + * + * This inits a context, and gets a file descriptor and associates some file + * ops to that file descriptor. If the file ops are blank, the cxl driver will + * fill them in with the default ones that mimic the standard user API. Once + * completed, the file descriptor can be installed. Once the file descriptor is + * installed, it's visible to the user so no errors must occur past this point. + * + * If cxl_fd_release() file op call is installed, the context will be stopped + * and released when the fd is released. Hence the driver won't need to manage + * this itself. + */ -#endif /* CONFIG_CXL_BASE */ +/* + * Take a context and associate it with my file ops. Returns the associated + * file and file descriptor. Any file ops which are blank are filled in by the + * cxl driver with the default ops to mimic the standard API. + */ +struct file *cxl_get_fd(struct cxl_context *ctx, struct file_operations *fops, + int *fd); +/* Get the context associated with this file */ +struct cxl_context *cxl_fops_get_context(struct file *file); +/* + * Start a context associated a struct cxl_ioctl_start_work used by the + * standard cxl user API. + */ +int cxl_start_work(struct cxl_context *ctx, + struct cxl_ioctl_start_work *work); +/* + * Export all the existing fops so drivers can use them + */ +int cxl_fd_open(struct inode *inode, struct file *file); +int cxl_fd_release(struct inode *inode, struct file *file); +long cxl_fd_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +int cxl_fd_mmap(struct file *file, struct vm_area_struct *vm); +unsigned int cxl_fd_poll(struct file *file, struct poll_table_struct *poll); +ssize_t cxl_fd_read(struct file *file, char __user *buf, size_t count, + loff_t *off); -#endif +#endif /* _MISC_CXL_H */ diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 36ac102c97c7..f0ee97eec24d 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -168,6 +168,7 @@ struct xfrm_state { struct xfrm_algo *ealg; struct xfrm_algo *calg; struct xfrm_algo_aead *aead; + const char *geniv; /* Data for encapsulator */ struct xfrm_encap_tmpl *encap; @@ -1314,6 +1315,7 @@ static inline int xfrm_id_proto_match(u8 proto, u8 userproto) * xfrm algorithm information */ struct xfrm_algo_aead_info { + char *geniv; u16 icv_truncbits; }; @@ -1323,6 +1325,7 @@ struct xfrm_algo_auth_info { }; struct xfrm_algo_encr_info { + char *geniv; u16 blockbits; u16 defkeybits; }; diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h index ac54c27a2bfd..fde33ac6b58a 100644 --- a/include/rdma/ib_addr.h +++ b/include/rdma/ib_addr.h @@ -111,8 +111,8 @@ int rdma_copy_addr(struct rdma_dev_addr *dev_addr, struct net_device *dev, int rdma_addr_size(struct sockaddr *addr); int rdma_addr_find_smac_by_sgid(union ib_gid *sgid, u8 *smac, u16 *vlan_id); -int rdma_addr_find_dmac_by_grh(union ib_gid *sgid, union ib_gid *dgid, u8 *smac, - u16 *vlan_id); +int rdma_addr_find_dmac_by_grh(const union ib_gid *sgid, const union ib_gid *dgid, + u8 *smac, u16 *vlan_id); static inline u16 ib_addr_get_pkey(struct rdma_dev_addr *dev_addr) { @@ -160,7 +160,7 @@ static inline int rdma_ip2gid(struct sockaddr *addr, union ib_gid *gid) } /* Important - sockaddr should be a union of sockaddr_in and sockaddr_in6 */ -static inline void rdma_gid2ip(struct sockaddr *out, union ib_gid *gid) +static inline void rdma_gid2ip(struct sockaddr *out, const union ib_gid *gid) { if (ipv6_addr_v4mapped((struct in6_addr *)gid)) { struct sockaddr_in *out_in = (struct sockaddr_in *)out; diff --git a/include/rdma/ib_cache.h b/include/rdma/ib_cache.h index ad9a3c280944..bd92130f4ac5 100644 --- a/include/rdma/ib_cache.h +++ b/include/rdma/ib_cache.h @@ -64,10 +64,10 @@ int ib_get_cached_gid(struct ib_device *device, * ib_find_cached_gid() searches for the specified GID value in * the local software cache. */ -int ib_find_cached_gid(struct ib_device *device, - union ib_gid *gid, - u8 *port_num, - u16 *index); +int ib_find_cached_gid(struct ib_device *device, + const union ib_gid *gid, + u8 *port_num, + u16 *index); /** * ib_get_cached_pkey - Returns a cached PKey table entry diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h index 9bb99e983f58..c8422d5a5a91 100644 --- a/include/rdma/ib_mad.h +++ b/include/rdma/ib_mad.h @@ -42,8 +42,11 @@ #include <rdma/ib_verbs.h> #include <uapi/rdma/ib_user_mad.h> -/* Management base version */ +/* Management base versions */ #define IB_MGMT_BASE_VERSION 1 +#define OPA_MGMT_BASE_VERSION 0x80 + +#define OPA_SMP_CLASS_VERSION 0x80 /* Management classes */ #define IB_MGMT_CLASS_SUBN_LID_ROUTED 0x01 @@ -135,6 +138,10 @@ enum { IB_MGMT_SA_DATA = 200, IB_MGMT_DEVICE_HDR = 64, IB_MGMT_DEVICE_DATA = 192, + IB_MGMT_MAD_SIZE = IB_MGMT_MAD_HDR + IB_MGMT_MAD_DATA, + OPA_MGMT_MAD_DATA = 2024, + OPA_MGMT_RMPP_DATA = 2012, + OPA_MGMT_MAD_SIZE = IB_MGMT_MAD_HDR + OPA_MGMT_MAD_DATA, }; struct ib_mad_hdr { @@ -181,12 +188,23 @@ struct ib_mad { u8 data[IB_MGMT_MAD_DATA]; }; +struct opa_mad { + struct ib_mad_hdr mad_hdr; + u8 data[OPA_MGMT_MAD_DATA]; +}; + struct ib_rmpp_mad { struct ib_mad_hdr mad_hdr; struct ib_rmpp_hdr rmpp_hdr; u8 data[IB_MGMT_RMPP_DATA]; }; +struct opa_rmpp_mad { + struct ib_mad_hdr mad_hdr; + struct ib_rmpp_hdr rmpp_hdr; + u8 data[OPA_MGMT_RMPP_DATA]; +}; + struct ib_sa_mad { struct ib_mad_hdr mad_hdr; struct ib_rmpp_hdr rmpp_hdr; @@ -235,7 +253,10 @@ struct ib_class_port_info { * includes the common MAD, RMPP, and class specific headers. * @data_len: Indicates the total size of user-transferred data. * @seg_count: The number of RMPP segments allocated for this send. - * @seg_size: Size of each RMPP segment. + * @seg_size: Size of the data in each RMPP segment. This does not include + * class specific headers. + * @seg_rmpp_size: Size of each RMPP segment including the class specific + * headers. * @timeout_ms: Time to wait for a response. * @retries: Number of times to retry a request for a response. For MADs * using RMPP, this applies per window. On completion, returns the number @@ -255,6 +276,7 @@ struct ib_mad_send_buf { int data_len; int seg_count; int seg_size; + int seg_rmpp_size; int timeout_ms; int retries; }; @@ -263,7 +285,7 @@ struct ib_mad_send_buf { * ib_response_mad - Returns if the specified MAD has been generated in * response to a sent request or trap. */ -int ib_response_mad(struct ib_mad *mad); +int ib_response_mad(const struct ib_mad_hdr *hdr); /** * ib_get_rmpp_resptime - Returns the RMPP response time. @@ -401,7 +423,10 @@ struct ib_mad_send_wc { struct ib_mad_recv_buf { struct list_head list; struct ib_grh *grh; - struct ib_mad *mad; + union { + struct ib_mad *mad; + struct opa_mad *opa_mad; + }; }; /** @@ -410,6 +435,7 @@ struct ib_mad_recv_buf { * @recv_buf: Specifies the location of the received data buffer(s). * @rmpp_list: Specifies a list of RMPP reassembled received MAD buffers. * @mad_len: The length of the received MAD, without duplicated headers. + * @mad_seg_size: The size of individual MAD segments * * For received response, the wr_id contains a pointer to the ib_mad_send_buf * for the corresponding send request. @@ -419,6 +445,7 @@ struct ib_mad_recv_wc { struct ib_mad_recv_buf recv_buf; struct list_head rmpp_list; int mad_len; + size_t mad_seg_size; }; /** @@ -618,6 +645,7 @@ int ib_process_mad_wc(struct ib_mad_agent *mad_agent, * automatically adjust the allocated buffer size to account for any * additional padding that may be necessary. * @gfp_mask: GFP mask used for the memory allocation. + * @base_version: Base Version of this MAD * * This routine allocates a MAD for sending. The returned MAD send buffer * will reference a data buffer usable for sending a MAD, along @@ -633,7 +661,8 @@ struct ib_mad_send_buf *ib_create_send_mad(struct ib_mad_agent *mad_agent, u32 remote_qpn, u16 pkey_index, int rmpp_active, int hdr_len, int data_len, - gfp_t gfp_mask); + gfp_t gfp_mask, + u8 base_version); /** * ib_is_mad_class_rmpp - returns whether given management class @@ -675,6 +704,6 @@ void ib_free_send_mad(struct ib_mad_send_buf *send_buf); * @agent: the agent in question * @return: true if agent is performing rmpp, false otherwise. */ -int ib_mad_kernel_rmpp_agent(struct ib_mad_agent *agent); +int ib_mad_kernel_rmpp_agent(const struct ib_mad_agent *agent); #endif /* IB_MAD_H */ diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 65994a19e840..986fddb08579 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -81,6 +81,13 @@ enum rdma_transport_type { RDMA_TRANSPORT_USNIC_UDP }; +enum rdma_protocol_type { + RDMA_PROTOCOL_IB, + RDMA_PROTOCOL_IBOE, + RDMA_PROTOCOL_IWARP, + RDMA_PROTOCOL_USNIC_UDP +}; + __attribute_const__ enum rdma_transport_type rdma_node_get_transport(enum rdma_node_type node_type); @@ -166,6 +173,16 @@ struct ib_odp_caps { } per_transport_caps; }; +enum ib_cq_creation_flags { + IB_CQ_FLAGS_TIMESTAMP_COMPLETION = 1 << 0, +}; + +struct ib_cq_init_attr { + unsigned int cqe; + int comp_vector; + u32 flags; +}; + struct ib_device_attr { u64 fw_ver; __be64 sys_image_guid; @@ -210,6 +227,8 @@ struct ib_device_attr { int sig_prot_cap; int sig_guard_cap; struct ib_odp_caps odp_caps; + uint64_t timestamp_mask; + uint64_t hca_core_clock; /* in KHZ */ }; enum ib_mtu { @@ -346,6 +365,42 @@ union rdma_protocol_stats { struct iw_protocol_stats iw; }; +/* Define bits for the various functionality this port needs to be supported by + * the core. + */ +/* Management 0x00000FFF */ +#define RDMA_CORE_CAP_IB_MAD 0x00000001 +#define RDMA_CORE_CAP_IB_SMI 0x00000002 +#define RDMA_CORE_CAP_IB_CM 0x00000004 +#define RDMA_CORE_CAP_IW_CM 0x00000008 +#define RDMA_CORE_CAP_IB_SA 0x00000010 +#define RDMA_CORE_CAP_OPA_MAD 0x00000020 + +/* Address format 0x000FF000 */ +#define RDMA_CORE_CAP_AF_IB 0x00001000 +#define RDMA_CORE_CAP_ETH_AH 0x00002000 + +/* Protocol 0xFFF00000 */ +#define RDMA_CORE_CAP_PROT_IB 0x00100000 +#define RDMA_CORE_CAP_PROT_ROCE 0x00200000 +#define RDMA_CORE_CAP_PROT_IWARP 0x00400000 + +#define RDMA_CORE_PORT_IBA_IB (RDMA_CORE_CAP_PROT_IB \ + | RDMA_CORE_CAP_IB_MAD \ + | RDMA_CORE_CAP_IB_SMI \ + | RDMA_CORE_CAP_IB_CM \ + | RDMA_CORE_CAP_IB_SA \ + | RDMA_CORE_CAP_AF_IB) +#define RDMA_CORE_PORT_IBA_ROCE (RDMA_CORE_CAP_PROT_ROCE \ + | RDMA_CORE_CAP_IB_MAD \ + | RDMA_CORE_CAP_IB_CM \ + | RDMA_CORE_CAP_AF_IB \ + | RDMA_CORE_CAP_ETH_AH) +#define RDMA_CORE_PORT_IWARP (RDMA_CORE_CAP_PROT_IWARP \ + | RDMA_CORE_CAP_IW_CM) +#define RDMA_CORE_PORT_INTEL_OPA (RDMA_CORE_PORT_IBA_IB \ + | RDMA_CORE_CAP_OPA_MAD) + struct ib_port_attr { enum ib_port_state state; enum ib_mtu max_mtu; @@ -412,6 +467,8 @@ enum ib_event_type { IB_EVENT_GID_CHANGE, }; +__attribute_const__ const char *ib_event_msg(enum ib_event_type event); + struct ib_event { struct ib_device *device; union { @@ -663,6 +720,8 @@ enum ib_wc_status { IB_WC_GENERAL_ERR }; +__attribute_const__ const char *ib_wc_status_msg(enum ib_wc_status status); + enum ib_wc_opcode { IB_WC_SEND, IB_WC_RDMA_WRITE, @@ -1407,7 +1466,7 @@ struct ib_flow { struct ib_uobject *uobject; }; -struct ib_mad; +struct ib_mad_hdr; struct ib_grh; enum ib_process_mad_flags { @@ -1474,6 +1533,13 @@ struct ib_dma_mapping_ops { struct iw_cm_verbs; +struct ib_port_immutable { + int pkey_tbl_len; + int gid_tbl_len; + u32 core_cap_flags; + u32 max_mad_size; +}; + struct ib_device { struct device *dma_device; @@ -1487,8 +1553,10 @@ struct ib_device { struct list_head client_data_list; struct ib_cache cache; - int *pkey_tbl_len; - int *gid_tbl_len; + /** + * port_immutable is indexed by port number + */ + struct ib_port_immutable *port_immutable; int num_comp_vectors; @@ -1497,7 +1565,8 @@ struct ib_device { int (*get_protocol_stats)(struct ib_device *device, union rdma_protocol_stats *stats); int (*query_device)(struct ib_device *device, - struct ib_device_attr *device_attr); + struct ib_device_attr *device_attr, + struct ib_udata *udata); int (*query_port)(struct ib_device *device, u8 port_num, struct ib_port_attr *port_attr); @@ -1561,8 +1630,8 @@ struct ib_device { int (*post_recv)(struct ib_qp *qp, struct ib_recv_wr *recv_wr, struct ib_recv_wr **bad_recv_wr); - struct ib_cq * (*create_cq)(struct ib_device *device, int cqe, - int comp_vector, + struct ib_cq * (*create_cq)(struct ib_device *device, + const struct ib_cq_init_attr *attr, struct ib_ucontext *context, struct ib_udata *udata); int (*modify_cq)(struct ib_cq *cq, u16 cq_count, @@ -1637,10 +1706,13 @@ struct ib_device { int (*process_mad)(struct ib_device *device, int process_mad_flags, u8 port_num, - struct ib_wc *in_wc, - struct ib_grh *in_grh, - struct ib_mad *in_mad, - struct ib_mad *out_mad); + const struct ib_wc *in_wc, + const struct ib_grh *in_grh, + const struct ib_mad_hdr *in_mad, + size_t in_mad_size, + struct ib_mad_hdr *out_mad, + size_t *out_mad_size, + u16 *out_mad_pkey_index); struct ib_xrcd * (*alloc_xrcd)(struct ib_device *device, struct ib_ucontext *ucontext, struct ib_udata *udata); @@ -1675,6 +1747,14 @@ struct ib_device { u32 local_dma_lkey; u8 node_type; u8 phys_port_cnt; + + /** + * The following mandatory functions are used only at device + * registration. Keep functions such as these at the end of this + * structure to avoid cache line misses when accessing struct ib_device + * in fast paths. + */ + int (*get_port_immutable)(struct ib_device *, u8, struct ib_port_immutable *); }; struct ib_client { @@ -1743,6 +1823,284 @@ int ib_query_port(struct ib_device *device, enum rdma_link_layer rdma_port_get_link_layer(struct ib_device *device, u8 port_num); +/** + * rdma_start_port - Return the first valid port number for the device + * specified + * + * @device: Device to be checked + * + * Return start port number + */ +static inline u8 rdma_start_port(const struct ib_device *device) +{ + return (device->node_type == RDMA_NODE_IB_SWITCH) ? 0 : 1; +} + +/** + * rdma_end_port - Return the last valid port number for the device + * specified + * + * @device: Device to be checked + * + * Return last port number + */ +static inline u8 rdma_end_port(const struct ib_device *device) +{ + return (device->node_type == RDMA_NODE_IB_SWITCH) ? + 0 : device->phys_port_cnt; +} + +static inline bool rdma_protocol_ib(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_PROT_IB; +} + +static inline bool rdma_protocol_roce(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_PROT_ROCE; +} + +static inline bool rdma_protocol_iwarp(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_PROT_IWARP; +} + +static inline bool rdma_ib_or_roce(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & + (RDMA_CORE_CAP_PROT_IB | RDMA_CORE_CAP_PROT_ROCE); +} + +/** + * rdma_cap_ib_mad - Check if the port of a device supports Infiniband + * Management Datagrams. + * @device: Device to check + * @port_num: Port number to check + * + * Management Datagrams (MAD) are a required part of the InfiniBand + * specification and are supported on all InfiniBand devices. A slightly + * extended version are also supported on OPA interfaces. + * + * Return: true if the port supports sending/receiving of MAD packets. + */ +static inline bool rdma_cap_ib_mad(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_IB_MAD; +} + +/** + * rdma_cap_opa_mad - Check if the port of device provides support for OPA + * Management Datagrams. + * @device: Device to check + * @port_num: Port number to check + * + * Intel OmniPath devices extend and/or replace the InfiniBand Management + * datagrams with their own versions. These OPA MADs share many but not all of + * the characteristics of InfiniBand MADs. + * + * OPA MADs differ in the following ways: + * + * 1) MADs are variable size up to 2K + * IBTA defined MADs remain fixed at 256 bytes + * 2) OPA SMPs must carry valid PKeys + * 3) OPA SMP packets are a different format + * + * Return: true if the port supports OPA MAD packet formats. + */ +static inline bool rdma_cap_opa_mad(struct ib_device *device, u8 port_num) +{ + return (device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_OPA_MAD) + == RDMA_CORE_CAP_OPA_MAD; +} + +/** + * rdma_cap_ib_smi - Check if the port of a device provides an Infiniband + * Subnet Management Agent (SMA) on the Subnet Management Interface (SMI). + * @device: Device to check + * @port_num: Port number to check + * + * Each InfiniBand node is required to provide a Subnet Management Agent + * that the subnet manager can access. Prior to the fabric being fully + * configured by the subnet manager, the SMA is accessed via a well known + * interface called the Subnet Management Interface (SMI). This interface + * uses directed route packets to communicate with the SM to get around the + * chicken and egg problem of the SM needing to know what's on the fabric + * in order to configure the fabric, and needing to configure the fabric in + * order to send packets to the devices on the fabric. These directed + * route packets do not need the fabric fully configured in order to reach + * their destination. The SMI is the only method allowed to send + * directed route packets on an InfiniBand fabric. + * + * Return: true if the port provides an SMI. + */ +static inline bool rdma_cap_ib_smi(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_IB_SMI; +} + +/** + * rdma_cap_ib_cm - Check if the port of device has the capability Infiniband + * Communication Manager. + * @device: Device to check + * @port_num: Port number to check + * + * The InfiniBand Communication Manager is one of many pre-defined General + * Service Agents (GSA) that are accessed via the General Service + * Interface (GSI). It's role is to facilitate establishment of connections + * between nodes as well as other management related tasks for established + * connections. + * + * Return: true if the port supports an IB CM (this does not guarantee that + * a CM is actually running however). + */ +static inline bool rdma_cap_ib_cm(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_IB_CM; +} + +/** + * rdma_cap_iw_cm - Check if the port of device has the capability IWARP + * Communication Manager. + * @device: Device to check + * @port_num: Port number to check + * + * Similar to above, but specific to iWARP connections which have a different + * managment protocol than InfiniBand. + * + * Return: true if the port supports an iWARP CM (this does not guarantee that + * a CM is actually running however). + */ +static inline bool rdma_cap_iw_cm(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_IW_CM; +} + +/** + * rdma_cap_ib_sa - Check if the port of device has the capability Infiniband + * Subnet Administration. + * @device: Device to check + * @port_num: Port number to check + * + * An InfiniBand Subnet Administration (SA) service is a pre-defined General + * Service Agent (GSA) provided by the Subnet Manager (SM). On InfiniBand + * fabrics, devices should resolve routes to other hosts by contacting the + * SA to query the proper route. + * + * Return: true if the port should act as a client to the fabric Subnet + * Administration interface. This does not imply that the SA service is + * running locally. + */ +static inline bool rdma_cap_ib_sa(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_IB_SA; +} + +/** + * rdma_cap_ib_mcast - Check if the port of device has the capability Infiniband + * Multicast. + * @device: Device to check + * @port_num: Port number to check + * + * InfiniBand multicast registration is more complex than normal IPv4 or + * IPv6 multicast registration. Each Host Channel Adapter must register + * with the Subnet Manager when it wishes to join a multicast group. It + * should do so only once regardless of how many queue pairs it subscribes + * to this group. And it should leave the group only after all queue pairs + * attached to the group have been detached. + * + * Return: true if the port must undertake the additional adminstrative + * overhead of registering/unregistering with the SM and tracking of the + * total number of queue pairs attached to the multicast group. + */ +static inline bool rdma_cap_ib_mcast(const struct ib_device *device, u8 port_num) +{ + return rdma_cap_ib_sa(device, port_num); +} + +/** + * rdma_cap_af_ib - Check if the port of device has the capability + * Native Infiniband Address. + * @device: Device to check + * @port_num: Port number to check + * + * InfiniBand addressing uses a port's GUID + Subnet Prefix to make a default + * GID. RoCE uses a different mechanism, but still generates a GID via + * a prescribed mechanism and port specific data. + * + * Return: true if the port uses a GID address to identify devices on the + * network. + */ +static inline bool rdma_cap_af_ib(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_AF_IB; +} + +/** + * rdma_cap_eth_ah - Check if the port of device has the capability + * Ethernet Address Handle. + * @device: Device to check + * @port_num: Port number to check + * + * RoCE is InfiniBand over Ethernet, and it uses a well defined technique + * to fabricate GIDs over Ethernet/IP specific addresses native to the + * port. Normally, packet headers are generated by the sending host + * adapter, but when sending connectionless datagrams, we must manually + * inject the proper headers for the fabric we are communicating over. + * + * Return: true if we are running as a RoCE port and must force the + * addition of a Global Route Header built from our Ethernet Address + * Handle into our header list for connectionless packets. + */ +static inline bool rdma_cap_eth_ah(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_ETH_AH; +} + +/** + * rdma_cap_read_multi_sge - Check if the port of device has the capability + * RDMA Read Multiple Scatter-Gather Entries. + * @device: Device to check + * @port_num: Port number to check + * + * iWARP has a restriction that RDMA READ requests may only have a single + * Scatter/Gather Entry (SGE) in the work request. + * + * NOTE: although the linux kernel currently assumes all devices are either + * single SGE RDMA READ devices or identical SGE maximums for RDMA READs and + * WRITEs, according to Tom Talpey, this is not accurate. There are some + * devices out there that support more than a single SGE on RDMA READ + * requests, but do not support the same number of SGEs as they do on + * RDMA WRITE requests. The linux kernel would need rearchitecting to + * support these imbalanced READ/WRITE SGEs allowed devices. So, for now, + * suffice with either the device supports the same READ/WRITE SGEs, or + * it only gets one READ sge. + * + * Return: true for any device that allows more than one SGE in RDMA READ + * requests. + */ +static inline bool rdma_cap_read_multi_sge(struct ib_device *device, + u8 port_num) +{ + return !(device->port_immutable[port_num].core_cap_flags & RDMA_CORE_CAP_PROT_IWARP); +} + +/** + * rdma_max_mad_size - Return the max MAD size required by this RDMA Port. + * + * @device: Device + * @port_num: Port number + * + * This MAD size includes the MAD headers and MAD payload. No other headers + * are included. + * + * Return the max MAD size required by the Port. Will return 0 if the port + * does not support MADs + */ +static inline size_t rdma_max_mad_size(const struct ib_device *device, u8 port_num) +{ + return device->port_immutable[port_num].max_mad_size; +} + int ib_query_gid(struct ib_device *device, u8 port_num, int index, union ib_gid *gid); @@ -1799,8 +2157,9 @@ struct ib_ah *ib_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr); * @ah_attr: Returned attributes that can be used when creating an address * handle for replying to the message. */ -int ib_init_ah_from_wc(struct ib_device *device, u8 port_num, struct ib_wc *wc, - struct ib_grh *grh, struct ib_ah_attr *ah_attr); +int ib_init_ah_from_wc(struct ib_device *device, u8 port_num, + const struct ib_wc *wc, const struct ib_grh *grh, + struct ib_ah_attr *ah_attr); /** * ib_create_ah_from_wc - Creates an address handle associated with the @@ -1814,8 +2173,8 @@ int ib_init_ah_from_wc(struct ib_device *device, u8 port_num, struct ib_wc *wc, * The address handle is used to reference a local or global destination * in all UD QP post sends. */ -struct ib_ah *ib_create_ah_from_wc(struct ib_pd *pd, struct ib_wc *wc, - struct ib_grh *grh, u8 port_num); +struct ib_ah *ib_create_ah_from_wc(struct ib_pd *pd, const struct ib_wc *wc, + const struct ib_grh *grh, u8 port_num); /** * ib_modify_ah - Modifies the address vector associated with an address @@ -2011,16 +2370,15 @@ static inline int ib_post_recv(struct ib_qp *qp, * asynchronous event not associated with a completion occurs on the CQ. * @cq_context: Context associated with the CQ returned to the user via * the associated completion and event handlers. - * @cqe: The minimum size of the CQ. - * @comp_vector - Completion vector used to signal completion events. - * Must be >= 0 and < context->num_comp_vectors. + * @cq_attr: The attributes the CQ should be created upon. * * Users can examine the cq structure to determine the actual CQ size. */ struct ib_cq *ib_create_cq(struct ib_device *device, ib_comp_handler comp_handler, void (*event_handler)(struct ib_event *, void *), - void *cq_context, int cqe, int comp_vector); + void *cq_context, + const struct ib_cq_init_attr *cq_attr); /** * ib_resize_cq - Modifies the capacity of the CQ. diff --git a/include/rdma/iw_cm.h b/include/rdma/iw_cm.h index 1017e0bdf8ba..036bd2772662 100644 --- a/include/rdma/iw_cm.h +++ b/include/rdma/iw_cm.h @@ -91,6 +91,7 @@ struct iw_cm_id { /* Used by provider to add and remove refs on IW cm_id */ void (*add_ref)(struct iw_cm_id *); void (*rem_ref)(struct iw_cm_id *); + u8 tos; }; struct iw_cm_conn_param { diff --git a/include/rdma/opa_smi.h b/include/rdma/opa_smi.h new file mode 100644 index 000000000000..29063e84c253 --- /dev/null +++ b/include/rdma/opa_smi.h @@ -0,0 +1,106 @@ +/* + * Copyright (c) 2014 Intel Corporation. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#if !defined(OPA_SMI_H) +#define OPA_SMI_H + +#include <rdma/ib_mad.h> +#include <rdma/ib_smi.h> + +#define OPA_SMP_LID_DATA_SIZE 2016 +#define OPA_SMP_DR_DATA_SIZE 1872 +#define OPA_SMP_MAX_PATH_HOPS 64 + +#define OPA_SMI_CLASS_VERSION 0x80 + +#define OPA_LID_PERMISSIVE cpu_to_be32(0xFFFFFFFF) + +struct opa_smp { + u8 base_version; + u8 mgmt_class; + u8 class_version; + u8 method; + __be16 status; + u8 hop_ptr; + u8 hop_cnt; + __be64 tid; + __be16 attr_id; + __be16 resv; + __be32 attr_mod; + __be64 mkey; + union { + struct { + uint8_t data[OPA_SMP_LID_DATA_SIZE]; + } lid; + struct { + __be32 dr_slid; + __be32 dr_dlid; + u8 initial_path[OPA_SMP_MAX_PATH_HOPS]; + u8 return_path[OPA_SMP_MAX_PATH_HOPS]; + u8 reserved[8]; + u8 data[OPA_SMP_DR_DATA_SIZE]; + } dr; + } route; +} __packed; + + +static inline u8 +opa_get_smp_direction(struct opa_smp *smp) +{ + return ib_get_smp_direction((struct ib_smp *)smp); +} + +static inline u8 *opa_get_smp_data(struct opa_smp *smp) +{ + if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) + return smp->route.dr.data; + + return smp->route.lid.data; +} + +static inline size_t opa_get_smp_data_size(struct opa_smp *smp) +{ + if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) + return sizeof(smp->route.dr.data); + + return sizeof(smp->route.lid.data); +} + +static inline size_t opa_get_smp_header_size(struct opa_smp *smp) +{ + if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) + return sizeof(*smp) - sizeof(smp->route.dr.data); + + return sizeof(*smp) - sizeof(smp->route.lid.data); +} + +#endif /* OPA_SMI_H */ diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index 1ed2088dc9f5..c92522c192d2 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -62,6 +62,8 @@ enum rdma_cm_event_type { RDMA_CM_EVENT_TIMEWAIT_EXIT }; +__attribute_const__ const char *rdma_event_msg(enum rdma_cm_event_type event); + enum rdma_port_space { RDMA_PS_SDP = 0x0001, RDMA_PS_IPOIB = 0x0002, diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index d0a66aa1868d..e0a3398b1547 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -1,9 +1,6 @@ /* * This header file contains public constants and structures used by - * the scsi code for linux. - * - * For documentation on the OPCODES, MESSAGES, and SENSE values, - * please consult the SCSI standard. + * the SCSI initiator code. */ #ifndef _SCSI_SCSI_H #define _SCSI_SCSI_H @@ -11,6 +8,8 @@ #include <linux/types.h> #include <linux/scatterlist.h> #include <linux/kernel.h> +#include <scsi/scsi_common.h> +#include <scsi/scsi_proto.h> struct scsi_cmnd; @@ -49,187 +48,6 @@ enum scsi_timeouts { */ #define SCAN_WILD_CARD ~0 -/* - * SCSI opcodes - */ - -#define TEST_UNIT_READY 0x00 -#define REZERO_UNIT 0x01 -#define REQUEST_SENSE 0x03 -#define FORMAT_UNIT 0x04 -#define READ_BLOCK_LIMITS 0x05 -#define REASSIGN_BLOCKS 0x07 -#define INITIALIZE_ELEMENT_STATUS 0x07 -#define READ_6 0x08 -#define WRITE_6 0x0a -#define SEEK_6 0x0b -#define READ_REVERSE 0x0f -#define WRITE_FILEMARKS 0x10 -#define SPACE 0x11 -#define INQUIRY 0x12 -#define RECOVER_BUFFERED_DATA 0x14 -#define MODE_SELECT 0x15 -#define RESERVE 0x16 -#define RELEASE 0x17 -#define COPY 0x18 -#define ERASE 0x19 -#define MODE_SENSE 0x1a -#define START_STOP 0x1b -#define RECEIVE_DIAGNOSTIC 0x1c -#define SEND_DIAGNOSTIC 0x1d -#define ALLOW_MEDIUM_REMOVAL 0x1e - -#define READ_FORMAT_CAPACITIES 0x23 -#define SET_WINDOW 0x24 -#define READ_CAPACITY 0x25 -#define READ_10 0x28 -#define WRITE_10 0x2a -#define SEEK_10 0x2b -#define POSITION_TO_ELEMENT 0x2b -#define WRITE_VERIFY 0x2e -#define VERIFY 0x2f -#define SEARCH_HIGH 0x30 -#define SEARCH_EQUAL 0x31 -#define SEARCH_LOW 0x32 -#define SET_LIMITS 0x33 -#define PRE_FETCH 0x34 -#define READ_POSITION 0x34 -#define SYNCHRONIZE_CACHE 0x35 -#define LOCK_UNLOCK_CACHE 0x36 -#define READ_DEFECT_DATA 0x37 -#define MEDIUM_SCAN 0x38 -#define COMPARE 0x39 -#define COPY_VERIFY 0x3a -#define WRITE_BUFFER 0x3b -#define READ_BUFFER 0x3c -#define UPDATE_BLOCK 0x3d -#define READ_LONG 0x3e -#define WRITE_LONG 0x3f -#define CHANGE_DEFINITION 0x40 -#define WRITE_SAME 0x41 -#define UNMAP 0x42 -#define READ_TOC 0x43 -#define READ_HEADER 0x44 -#define GET_EVENT_STATUS_NOTIFICATION 0x4a -#define LOG_SELECT 0x4c -#define LOG_SENSE 0x4d -#define XDWRITEREAD_10 0x53 -#define MODE_SELECT_10 0x55 -#define RESERVE_10 0x56 -#define RELEASE_10 0x57 -#define MODE_SENSE_10 0x5a -#define PERSISTENT_RESERVE_IN 0x5e -#define PERSISTENT_RESERVE_OUT 0x5f -#define VARIABLE_LENGTH_CMD 0x7f -#define REPORT_LUNS 0xa0 -#define SECURITY_PROTOCOL_IN 0xa2 -#define MAINTENANCE_IN 0xa3 -#define MAINTENANCE_OUT 0xa4 -#define MOVE_MEDIUM 0xa5 -#define EXCHANGE_MEDIUM 0xa6 -#define READ_12 0xa8 -#define SERVICE_ACTION_OUT_12 0xa9 -#define WRITE_12 0xaa -#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */ -#define SERVICE_ACTION_IN_12 0xab -#define WRITE_VERIFY_12 0xae -#define VERIFY_12 0xaf -#define SEARCH_HIGH_12 0xb0 -#define SEARCH_EQUAL_12 0xb1 -#define SEARCH_LOW_12 0xb2 -#define SECURITY_PROTOCOL_OUT 0xb5 -#define READ_ELEMENT_STATUS 0xb8 -#define SEND_VOLUME_TAG 0xb6 -#define WRITE_LONG_2 0xea -#define EXTENDED_COPY 0x83 -#define RECEIVE_COPY_RESULTS 0x84 -#define ACCESS_CONTROL_IN 0x86 -#define ACCESS_CONTROL_OUT 0x87 -#define READ_16 0x88 -#define COMPARE_AND_WRITE 0x89 -#define WRITE_16 0x8a -#define READ_ATTRIBUTE 0x8c -#define WRITE_ATTRIBUTE 0x8d -#define VERIFY_16 0x8f -#define SYNCHRONIZE_CACHE_16 0x91 -#define WRITE_SAME_16 0x93 -#define SERVICE_ACTION_BIDIRECTIONAL 0x9d -#define SERVICE_ACTION_IN_16 0x9e -#define SERVICE_ACTION_OUT_16 0x9f -/* values for service action in */ -#define SAI_READ_CAPACITY_16 0x10 -#define SAI_GET_LBA_STATUS 0x12 -#define SAI_REPORT_REFERRALS 0x13 -/* values for VARIABLE_LENGTH_CMD service action codes - * see spc4r17 Section D.3.5, table D.7 and D.8 */ -#define VLC_SA_RECEIVE_CREDENTIAL 0x1800 -/* values for maintenance in */ -#define MI_REPORT_IDENTIFYING_INFORMATION 0x05 -#define MI_REPORT_TARGET_PGS 0x0a -#define MI_REPORT_ALIASES 0x0b -#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c -#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d -#define MI_REPORT_PRIORITY 0x0e -#define MI_REPORT_TIMESTAMP 0x0f -#define MI_MANAGEMENT_PROTOCOL_IN 0x10 -/* value for MI_REPORT_TARGET_PGS ext header */ -#define MI_EXT_HDR_PARAM_FMT 0x20 -/* values for maintenance out */ -#define MO_SET_IDENTIFYING_INFORMATION 0x06 -#define MO_SET_TARGET_PGS 0x0a -#define MO_CHANGE_ALIASES 0x0b -#define MO_SET_PRIORITY 0x0e -#define MO_SET_TIMESTAMP 0x0f -#define MO_MANAGEMENT_PROTOCOL_OUT 0x10 -/* values for variable length command */ -#define XDREAD_32 0x03 -#define XDWRITE_32 0x04 -#define XPWRITE_32 0x06 -#define XDWRITEREAD_32 0x07 -#define READ_32 0x09 -#define VERIFY_32 0x0a -#define WRITE_32 0x0b -#define WRITE_SAME_32 0x0d - -/* Values for T10/04-262r7 */ -#define ATA_16 0x85 /* 16-byte pass-thru */ -#define ATA_12 0xa1 /* 12-byte pass-thru */ - -/* Vendor specific CDBs start here */ -#define VENDOR_SPECIFIC_CDB 0xc0 - -/* - * SCSI command lengths - */ - -#define SCSI_MAX_VARLEN_CDB_SIZE 260 - -/* defined in T10 SCSI Primary Commands-2 (SPC2) */ -struct scsi_varlen_cdb_hdr { - __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */ - __u8 control; - __u8 misc[5]; - __u8 additional_cdb_length; /* total cdb length - 8 */ - __be16 service_action; - /* service specific data follows */ -}; - -static inline unsigned -scsi_varlen_cdb_length(const void *hdr) -{ - return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8; -} - -extern const unsigned char scsi_command_size_tbl[8]; -#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7] - -static inline unsigned -scsi_command_size(const unsigned char *cmnd) -{ - return (cmnd[0] == VARIABLE_LENGTH_CMD) ? - scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]); -} - #ifdef CONFIG_ACPI struct acpi_bus_type; @@ -240,22 +58,6 @@ extern void scsi_unregister_acpi_bus_type(struct acpi_bus_type *bus); #endif -/* - * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft - * T10/1561-D Revision 4 Draft dated 7th November 2002. - */ -#define SAM_STAT_GOOD 0x00 -#define SAM_STAT_CHECK_CONDITION 0x02 -#define SAM_STAT_CONDITION_MET 0x04 -#define SAM_STAT_BUSY 0x08 -#define SAM_STAT_INTERMEDIATE 0x10 -#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14 -#define SAM_STAT_RESERVATION_CONFLICT 0x18 -#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */ -#define SAM_STAT_TASK_SET_FULL 0x28 -#define SAM_STAT_ACA_ACTIVE 0x30 -#define SAM_STAT_TASK_ABORTED 0x40 - /** scsi_status_is_good - check the status return. * * @status: the status passed up from the driver (including host and @@ -279,86 +81,6 @@ static inline int scsi_status_is_good(int status) (status == SAM_STAT_COMMAND_TERMINATED)); } -/* - * Status codes. These are deprecated as they are shifted 1 bit right - * from those found in the SCSI standards. This causes confusion for - * applications that are ported to several OSes. Prefer SAM Status codes - * above. - */ - -#define GOOD 0x00 -#define CHECK_CONDITION 0x01 -#define CONDITION_GOOD 0x02 -#define BUSY 0x04 -#define INTERMEDIATE_GOOD 0x08 -#define INTERMEDIATE_C_GOOD 0x0a -#define RESERVATION_CONFLICT 0x0c -#define COMMAND_TERMINATED 0x11 -#define QUEUE_FULL 0x14 -#define ACA_ACTIVE 0x18 -#define TASK_ABORTED 0x20 - -#define STATUS_MASK 0xfe - -/* - * SENSE KEYS - */ - -#define NO_SENSE 0x00 -#define RECOVERED_ERROR 0x01 -#define NOT_READY 0x02 -#define MEDIUM_ERROR 0x03 -#define HARDWARE_ERROR 0x04 -#define ILLEGAL_REQUEST 0x05 -#define UNIT_ATTENTION 0x06 -#define DATA_PROTECT 0x07 -#define BLANK_CHECK 0x08 -#define COPY_ABORTED 0x0a -#define ABORTED_COMMAND 0x0b -#define VOLUME_OVERFLOW 0x0d -#define MISCOMPARE 0x0e - - -/* - * DEVICE TYPES - * Please keep them in 0x%02x format for $MODALIAS to work - */ - -#define TYPE_DISK 0x00 -#define TYPE_TAPE 0x01 -#define TYPE_PRINTER 0x02 -#define TYPE_PROCESSOR 0x03 /* HP scanners use this */ -#define TYPE_WORM 0x04 /* Treated as ROM by our system */ -#define TYPE_ROM 0x05 -#define TYPE_SCANNER 0x06 -#define TYPE_MOD 0x07 /* Magneto-optical disk - - * - treated as TYPE_DISK */ -#define TYPE_MEDIUM_CHANGER 0x08 -#define TYPE_COMM 0x09 /* Communications device */ -#define TYPE_RAID 0x0c -#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ -#define TYPE_RBC 0x0e -#define TYPE_OSD 0x11 -#define TYPE_ZBC 0x14 -#define TYPE_WLUN 0x1e /* well-known logical unit */ -#define TYPE_NO_LUN 0x7f - -/* SCSI protocols; these are taken from SPC-3 section 7.5 */ -enum scsi_protocol { - SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */ - SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */ - SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */ - SCSI_PROTOCOL_SBP = 3, /* firewire */ - SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */ - SCSI_PROTOCOL_ISCSI = 5, - SCSI_PROTOCOL_SAS = 6, - SCSI_PROTOCOL_ADT = 7, /* Media Changers */ - SCSI_PROTOCOL_ATA = 8, - SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */ -}; - -/* Returns a human-readable name for the device */ -extern const char * scsi_device_type(unsigned type); /* * standard mode-select header prepended to all mode-select commands @@ -380,13 +102,6 @@ struct ccs_modesel_head { }; /* - * ScsiLun: 8 byte LUN. - */ -struct scsi_lun { - __u8 scsi_lun[8]; -}; - -/* * The Well Known LUNS (SAM-3) in our int representation of a LUN */ #define SCSI_W_LUN_BASE 0xc100 diff --git a/include/scsi/scsi_common.h b/include/scsi/scsi_common.h new file mode 100644 index 000000000000..676b03b78e57 --- /dev/null +++ b/include/scsi/scsi_common.h @@ -0,0 +1,64 @@ +/* + * Functions used by both the SCSI initiator code and the SCSI target code. + */ + +#ifndef _SCSI_COMMON_H_ +#define _SCSI_COMMON_H_ + +#include <linux/types.h> +#include <scsi/scsi_proto.h> + +static inline unsigned +scsi_varlen_cdb_length(const void *hdr) +{ + return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8; +} + +extern const unsigned char scsi_command_size_tbl[8]; +#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7] + +static inline unsigned +scsi_command_size(const unsigned char *cmnd) +{ + return (cmnd[0] == VARIABLE_LENGTH_CMD) ? + scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]); +} + +/* Returns a human-readable name for the device */ +extern const char *scsi_device_type(unsigned type); + +extern void int_to_scsilun(u64, struct scsi_lun *); +extern u64 scsilun_to_int(struct scsi_lun *); + +/* + * This is a slightly modified SCSI sense "descriptor" format header. + * The addition is to allow the 0x70 and 0x71 response codes. The idea + * is to place the salient data from either "fixed" or "descriptor" sense + * format into one structure to ease application processing. + * + * The original sense buffer should be kept around for those cases + * in which more information is required (e.g. the LBA of a MEDIUM ERROR). + */ +struct scsi_sense_hdr { /* See SPC-3 section 4.5 */ + u8 response_code; /* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */ + u8 sense_key; + u8 asc; + u8 ascq; + u8 byte4; + u8 byte5; + u8 byte6; + u8 additional_length; /* always 0 for fixed sense format */ +}; + +static inline bool scsi_sense_valid(const struct scsi_sense_hdr *sshdr) +{ + if (!sshdr) + return false; + + return (sshdr->response_code & 0x70) == 0x70; +} + +extern bool scsi_normalize_sense(const u8 *sense_buffer, int sb_len, + struct scsi_sense_hdr *sshdr); + +#endif /* _SCSI_COMMON_H_ */ diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index a4c9336811d1..ae84b2214d40 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -413,8 +413,6 @@ extern void scsi_target_reap(struct scsi_target *); extern void scsi_target_block(struct device *); extern void scsi_target_unblock(struct device *, enum scsi_device_state); extern void scsi_remove_target(struct device *); -extern void int_to_scsilun(u64, struct scsi_lun *); -extern u64 scsilun_to_int(struct scsi_lun *); extern const char *scsi_device_state_name(enum scsi_device_state); extern int scsi_is_sdev_device(const struct device *); extern int scsi_is_target_device(const struct device *); diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h index 5a4bb5bb66b3..4942710ef720 100644 --- a/include/scsi/scsi_eh.h +++ b/include/scsi/scsi_eh.h @@ -7,43 +7,12 @@ struct scsi_device; struct Scsi_Host; -/* - * This is a slightly modified SCSI sense "descriptor" format header. - * The addition is to allow the 0x70 and 0x71 response codes. The idea - * is to place the salient data from either "fixed" or "descriptor" sense - * format into one structure to ease application processing. - * - * The original sense buffer should be kept around for those cases - * in which more information is required (e.g. the LBA of a MEDIUM ERROR). - */ -struct scsi_sense_hdr { /* See SPC-3 section 4.5 */ - u8 response_code; /* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */ - u8 sense_key; - u8 asc; - u8 ascq; - u8 byte4; - u8 byte5; - u8 byte6; - u8 additional_length; /* always 0 for fixed sense format */ -}; - -static inline bool scsi_sense_valid(const struct scsi_sense_hdr *sshdr) -{ - if (!sshdr) - return false; - - return (sshdr->response_code & 0x70) == 0x70; -} - - extern void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q); extern void scsi_eh_flush_done_q(struct list_head *done_q); extern void scsi_report_bus_reset(struct Scsi_Host *, int); extern void scsi_report_device_reset(struct Scsi_Host *, int, int); extern int scsi_block_when_processing_errors(struct scsi_device *); -extern bool scsi_normalize_sense(const u8 *sense_buffer, int sb_len, - struct scsi_sense_hdr *sshdr); extern bool scsi_command_normalize_sense(const struct scsi_cmnd *cmd, struct scsi_sense_hdr *sshdr); diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h new file mode 100644 index 000000000000..a9fbf1b38e71 --- /dev/null +++ b/include/scsi/scsi_proto.h @@ -0,0 +1,281 @@ +/* + * This header file contains public constants and structures used by + * both the SCSI initiator and the SCSI target code. + * + * For documentation on the OPCODES, MESSAGES, and SENSE values, + * please consult the SCSI standard. + */ + +#ifndef _SCSI_PROTO_H_ +#define _SCSI_PROTO_H_ + +#include <linux/types.h> + +/* + * SCSI opcodes + */ + +#define TEST_UNIT_READY 0x00 +#define REZERO_UNIT 0x01 +#define REQUEST_SENSE 0x03 +#define FORMAT_UNIT 0x04 +#define READ_BLOCK_LIMITS 0x05 +#define REASSIGN_BLOCKS 0x07 +#define INITIALIZE_ELEMENT_STATUS 0x07 +#define READ_6 0x08 +#define WRITE_6 0x0a +#define SEEK_6 0x0b +#define READ_REVERSE 0x0f +#define WRITE_FILEMARKS 0x10 +#define SPACE 0x11 +#define INQUIRY 0x12 +#define RECOVER_BUFFERED_DATA 0x14 +#define MODE_SELECT 0x15 +#define RESERVE 0x16 +#define RELEASE 0x17 +#define COPY 0x18 +#define ERASE 0x19 +#define MODE_SENSE 0x1a +#define START_STOP 0x1b +#define RECEIVE_DIAGNOSTIC 0x1c +#define SEND_DIAGNOSTIC 0x1d +#define ALLOW_MEDIUM_REMOVAL 0x1e + +#define READ_FORMAT_CAPACITIES 0x23 +#define SET_WINDOW 0x24 +#define READ_CAPACITY 0x25 +#define READ_10 0x28 +#define WRITE_10 0x2a +#define SEEK_10 0x2b +#define POSITION_TO_ELEMENT 0x2b +#define WRITE_VERIFY 0x2e +#define VERIFY 0x2f +#define SEARCH_HIGH 0x30 +#define SEARCH_EQUAL 0x31 +#define SEARCH_LOW 0x32 +#define SET_LIMITS 0x33 +#define PRE_FETCH 0x34 +#define READ_POSITION 0x34 +#define SYNCHRONIZE_CACHE 0x35 +#define LOCK_UNLOCK_CACHE 0x36 +#define READ_DEFECT_DATA 0x37 +#define MEDIUM_SCAN 0x38 +#define COMPARE 0x39 +#define COPY_VERIFY 0x3a +#define WRITE_BUFFER 0x3b +#define READ_BUFFER 0x3c +#define UPDATE_BLOCK 0x3d +#define READ_LONG 0x3e +#define WRITE_LONG 0x3f +#define CHANGE_DEFINITION 0x40 +#define WRITE_SAME 0x41 +#define UNMAP 0x42 +#define READ_TOC 0x43 +#define READ_HEADER 0x44 +#define GET_EVENT_STATUS_NOTIFICATION 0x4a +#define LOG_SELECT 0x4c +#define LOG_SENSE 0x4d +#define XDWRITEREAD_10 0x53 +#define MODE_SELECT_10 0x55 +#define RESERVE_10 0x56 +#define RELEASE_10 0x57 +#define MODE_SENSE_10 0x5a +#define PERSISTENT_RESERVE_IN 0x5e +#define PERSISTENT_RESERVE_OUT 0x5f +#define VARIABLE_LENGTH_CMD 0x7f +#define REPORT_LUNS 0xa0 +#define SECURITY_PROTOCOL_IN 0xa2 +#define MAINTENANCE_IN 0xa3 +#define MAINTENANCE_OUT 0xa4 +#define MOVE_MEDIUM 0xa5 +#define EXCHANGE_MEDIUM 0xa6 +#define READ_12 0xa8 +#define SERVICE_ACTION_OUT_12 0xa9 +#define WRITE_12 0xaa +#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */ +#define SERVICE_ACTION_IN_12 0xab +#define WRITE_VERIFY_12 0xae +#define VERIFY_12 0xaf +#define SEARCH_HIGH_12 0xb0 +#define SEARCH_EQUAL_12 0xb1 +#define SEARCH_LOW_12 0xb2 +#define SECURITY_PROTOCOL_OUT 0xb5 +#define READ_ELEMENT_STATUS 0xb8 +#define SEND_VOLUME_TAG 0xb6 +#define WRITE_LONG_2 0xea +#define EXTENDED_COPY 0x83 +#define RECEIVE_COPY_RESULTS 0x84 +#define ACCESS_CONTROL_IN 0x86 +#define ACCESS_CONTROL_OUT 0x87 +#define READ_16 0x88 +#define COMPARE_AND_WRITE 0x89 +#define WRITE_16 0x8a +#define READ_ATTRIBUTE 0x8c +#define WRITE_ATTRIBUTE 0x8d +#define VERIFY_16 0x8f +#define SYNCHRONIZE_CACHE_16 0x91 +#define WRITE_SAME_16 0x93 +#define SERVICE_ACTION_BIDIRECTIONAL 0x9d +#define SERVICE_ACTION_IN_16 0x9e +#define SERVICE_ACTION_OUT_16 0x9f +/* values for service action in */ +#define SAI_READ_CAPACITY_16 0x10 +#define SAI_GET_LBA_STATUS 0x12 +#define SAI_REPORT_REFERRALS 0x13 +/* values for VARIABLE_LENGTH_CMD service action codes + * see spc4r17 Section D.3.5, table D.7 and D.8 */ +#define VLC_SA_RECEIVE_CREDENTIAL 0x1800 +/* values for maintenance in */ +#define MI_REPORT_IDENTIFYING_INFORMATION 0x05 +#define MI_REPORT_TARGET_PGS 0x0a +#define MI_REPORT_ALIASES 0x0b +#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c +#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d +#define MI_REPORT_PRIORITY 0x0e +#define MI_REPORT_TIMESTAMP 0x0f +#define MI_MANAGEMENT_PROTOCOL_IN 0x10 +/* value for MI_REPORT_TARGET_PGS ext header */ +#define MI_EXT_HDR_PARAM_FMT 0x20 +/* values for maintenance out */ +#define MO_SET_IDENTIFYING_INFORMATION 0x06 +#define MO_SET_TARGET_PGS 0x0a +#define MO_CHANGE_ALIASES 0x0b +#define MO_SET_PRIORITY 0x0e +#define MO_SET_TIMESTAMP 0x0f +#define MO_MANAGEMENT_PROTOCOL_OUT 0x10 +/* values for variable length command */ +#define XDREAD_32 0x03 +#define XDWRITE_32 0x04 +#define XPWRITE_32 0x06 +#define XDWRITEREAD_32 0x07 +#define READ_32 0x09 +#define VERIFY_32 0x0a +#define WRITE_32 0x0b +#define WRITE_SAME_32 0x0d + +/* Values for T10/04-262r7 */ +#define ATA_16 0x85 /* 16-byte pass-thru */ +#define ATA_12 0xa1 /* 12-byte pass-thru */ + +/* Vendor specific CDBs start here */ +#define VENDOR_SPECIFIC_CDB 0xc0 + +/* + * SCSI command lengths + */ + +#define SCSI_MAX_VARLEN_CDB_SIZE 260 + +/* defined in T10 SCSI Primary Commands-2 (SPC2) */ +struct scsi_varlen_cdb_hdr { + __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */ + __u8 control; + __u8 misc[5]; + __u8 additional_cdb_length; /* total cdb length - 8 */ + __be16 service_action; + /* service specific data follows */ +}; + +/* + * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft + * T10/1561-D Revision 4 Draft dated 7th November 2002. + */ +#define SAM_STAT_GOOD 0x00 +#define SAM_STAT_CHECK_CONDITION 0x02 +#define SAM_STAT_CONDITION_MET 0x04 +#define SAM_STAT_BUSY 0x08 +#define SAM_STAT_INTERMEDIATE 0x10 +#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14 +#define SAM_STAT_RESERVATION_CONFLICT 0x18 +#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */ +#define SAM_STAT_TASK_SET_FULL 0x28 +#define SAM_STAT_ACA_ACTIVE 0x30 +#define SAM_STAT_TASK_ABORTED 0x40 + +/* + * Status codes. These are deprecated as they are shifted 1 bit right + * from those found in the SCSI standards. This causes confusion for + * applications that are ported to several OSes. Prefer SAM Status codes + * above. + */ + +#define GOOD 0x00 +#define CHECK_CONDITION 0x01 +#define CONDITION_GOOD 0x02 +#define BUSY 0x04 +#define INTERMEDIATE_GOOD 0x08 +#define INTERMEDIATE_C_GOOD 0x0a +#define RESERVATION_CONFLICT 0x0c +#define COMMAND_TERMINATED 0x11 +#define QUEUE_FULL 0x14 +#define ACA_ACTIVE 0x18 +#define TASK_ABORTED 0x20 + +#define STATUS_MASK 0xfe + +/* + * SENSE KEYS + */ + +#define NO_SENSE 0x00 +#define RECOVERED_ERROR 0x01 +#define NOT_READY 0x02 +#define MEDIUM_ERROR 0x03 +#define HARDWARE_ERROR 0x04 +#define ILLEGAL_REQUEST 0x05 +#define UNIT_ATTENTION 0x06 +#define DATA_PROTECT 0x07 +#define BLANK_CHECK 0x08 +#define COPY_ABORTED 0x0a +#define ABORTED_COMMAND 0x0b +#define VOLUME_OVERFLOW 0x0d +#define MISCOMPARE 0x0e + + +/* + * DEVICE TYPES + * Please keep them in 0x%02x format for $MODALIAS to work + */ + +#define TYPE_DISK 0x00 +#define TYPE_TAPE 0x01 +#define TYPE_PRINTER 0x02 +#define TYPE_PROCESSOR 0x03 /* HP scanners use this */ +#define TYPE_WORM 0x04 /* Treated as ROM by our system */ +#define TYPE_ROM 0x05 +#define TYPE_SCANNER 0x06 +#define TYPE_MOD 0x07 /* Magneto-optical disk - + * - treated as TYPE_DISK */ +#define TYPE_MEDIUM_CHANGER 0x08 +#define TYPE_COMM 0x09 /* Communications device */ +#define TYPE_RAID 0x0c +#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ +#define TYPE_RBC 0x0e +#define TYPE_OSD 0x11 +#define TYPE_ZBC 0x14 +#define TYPE_WLUN 0x1e /* well-known logical unit */ +#define TYPE_NO_LUN 0x7f + +/* SCSI protocols; these are taken from SPC-3 section 7.5 */ +enum scsi_protocol { + SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */ + SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */ + SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */ + SCSI_PROTOCOL_SBP = 3, /* firewire */ + SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */ + SCSI_PROTOCOL_ISCSI = 5, + SCSI_PROTOCOL_SAS = 6, + SCSI_PROTOCOL_ADT = 7, /* Media Changers */ + SCSI_PROTOCOL_ATA = 8, + SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */ +}; + +/* + * ScsiLun: 8 byte LUN. + */ +struct scsi_lun { + __u8 scsi_lun[8]; +}; + + +#endif /* _SCSI_PROTO_H_ */ diff --git a/include/scsi/srp.h b/include/scsi/srp.h index 1ae84db4c9fb..5be834de491a 100644 --- a/include/scsi/srp.h +++ b/include/scsi/srp.h @@ -42,6 +42,7 @@ */ #include <linux/types.h> +#include <scsi/scsi.h> enum { SRP_LOGIN_REQ = 0x00, @@ -179,7 +180,7 @@ struct srp_tsk_mgmt { u8 reserved1[6]; u64 tag; u8 reserved2[4]; - __be64 lun __attribute__((packed)); + struct scsi_lun lun; u8 reserved3[2]; u8 tsk_mgmt_func; u8 reserved4; @@ -200,7 +201,7 @@ struct srp_cmd { u8 data_in_desc_cnt; u64 tag; u8 reserved2[4]; - __be64 lun __attribute__((packed)); + struct scsi_lun lun; u8 reserved3; u8 task_attr; u8 reserved4; @@ -265,7 +266,7 @@ struct srp_aer_req { __be32 req_lim_delta; u64 tag; u32 reserved2; - __be64 lun; + struct scsi_lun lun; __be32 sense_data_len; u32 reserved3; u8 sense_data[0]; diff --git a/include/sound/hda_regmap.h b/include/sound/hda_regmap.h index 53a18b3635e2..df705908480a 100644 --- a/include/sound/hda_regmap.h +++ b/include/sound/hda_regmap.h @@ -9,6 +9,8 @@ #include <sound/core.h> #include <sound/hdaudio.h> +#define AC_AMP_FAKE_MUTE 0x10 /* fake mute bit set to amp verbs */ + int snd_hdac_regmap_init(struct hdac_device *codec); void snd_hdac_regmap_exit(struct hdac_device *codec); int snd_hdac_regmap_add_vendor_verb(struct hdac_device *codec, diff --git a/include/target/iscsi/iscsi_target_core.h b/include/target/iscsi/iscsi_target_core.h index 54e7af301888..006983b296dd 100644 --- a/include/target/iscsi/iscsi_target_core.h +++ b/include/target/iscsi/iscsi_target_core.h @@ -5,7 +5,6 @@ #include <linux/configfs.h> #include <net/sock.h> #include <net/tcp.h> -#include <scsi/scsi_cmnd.h> #include <scsi/iscsi_proto.h> #include <target/target_core_base.h> diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 480e9f82dfea..aec6f6a4477c 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -6,7 +6,6 @@ #include <linux/dma-mapping.h> #include <linux/blkdev.h> #include <linux/percpu_ida.h> -#include <scsi/scsi_cmnd.h> #include <net/sock.h> #include <net/tcp.h> @@ -17,23 +16,15 @@ /* Don't raise above 511 or REPORT_LUNS needs to handle >1 page */ #define TRANSPORT_MAX_LUNS_PER_TPG 256 /* - * By default we use 32-byte CDBs in TCM Core and subsystem plugin code. - * - * Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and - * include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use - * 16-byte CDBs by default and require an extra allocation for - * 32-byte CDBs to because of legacy issues. - * - * Within TCM Core there are no such legacy limitiations, so we go ahead - * use 32-byte CDBs by default and use include/scsi/scsi.h:scsi_command_size() - * within all TCM Core and subsystem plugin code. + * Maximum size of a CDB that can be stored in se_cmd without allocating + * memory dynamically for the CDB. */ #define TCM_MAX_COMMAND_SIZE 32 /* * From include/scsi/scsi_cmnd.h:SCSI_SENSE_BUFFERSIZE, currently * defined 96, but the real limit is 252 (or 260 including the header) */ -#define TRANSPORT_SENSE_BUFFER SCSI_SENSE_BUFFERSIZE +#define TRANSPORT_SENSE_BUFFER 96 /* Used by transport_send_check_condition_and_sense() */ #define SPC_SENSE_KEY_OFFSET 2 #define SPC_ADD_SENSE_LEN_OFFSET 7 diff --git a/include/trace/events/power.h b/include/trace/events/power.h index d19840b0cac8..630d1e5e4de0 100644 --- a/include/trace/events/power.h +++ b/include/trace/events/power.h @@ -42,45 +42,54 @@ TRACE_EVENT(pstate_sample, TP_PROTO(u32 core_busy, u32 scaled_busy, - u32 state, + u32 from, + u32 to, u64 mperf, u64 aperf, + u64 tsc, u32 freq ), TP_ARGS(core_busy, scaled_busy, - state, + from, + to, mperf, aperf, + tsc, freq ), TP_STRUCT__entry( __field(u32, core_busy) __field(u32, scaled_busy) - __field(u32, state) + __field(u32, from) + __field(u32, to) __field(u64, mperf) __field(u64, aperf) + __field(u64, tsc) __field(u32, freq) - - ), + ), TP_fast_assign( __entry->core_busy = core_busy; __entry->scaled_busy = scaled_busy; - __entry->state = state; + __entry->from = from; + __entry->to = to; __entry->mperf = mperf; __entry->aperf = aperf; + __entry->tsc = tsc; __entry->freq = freq; ), - TP_printk("core_busy=%lu scaled=%lu state=%lu mperf=%llu aperf=%llu freq=%lu ", + TP_printk("core_busy=%lu scaled=%lu from=%lu to=%lu mperf=%llu aperf=%llu tsc=%llu freq=%lu ", (unsigned long)__entry->core_busy, (unsigned long)__entry->scaled_busy, - (unsigned long)__entry->state, + (unsigned long)__entry->from, + (unsigned long)__entry->to, (unsigned long long)__entry->mperf, (unsigned long long)__entry->aperf, + (unsigned long long)__entry->tsc, (unsigned long)__entry->freq ) diff --git a/include/trace/events/target.h b/include/trace/events/target.h index 04c3c6efdcc2..50fea660c0f8 100644 --- a/include/trace/events/target.h +++ b/include/trace/events/target.h @@ -6,7 +6,7 @@ #include <linux/tracepoint.h> #include <linux/trace_seq.h> -#include <scsi/scsi.h> +#include <scsi/scsi_proto.h> #include <scsi/scsi_tcq.h> #include <target/target_core_base.h> diff --git a/include/trace/events/timer.h b/include/trace/events/timer.h index 68c2c2000f02..073b9ac245ba 100644 --- a/include/trace/events/timer.h +++ b/include/trace/events/timer.h @@ -43,15 +43,18 @@ DEFINE_EVENT(timer_class, timer_init, */ TRACE_EVENT(timer_start, - TP_PROTO(struct timer_list *timer, unsigned long expires), + TP_PROTO(struct timer_list *timer, + unsigned long expires, + unsigned int flags), - TP_ARGS(timer, expires), + TP_ARGS(timer, expires, flags), TP_STRUCT__entry( __field( void *, timer ) __field( void *, function ) __field( unsigned long, expires ) __field( unsigned long, now ) + __field( unsigned int, flags ) ), TP_fast_assign( @@ -59,11 +62,12 @@ TRACE_EVENT(timer_start, __entry->function = timer->function; __entry->expires = expires; __entry->now = jiffies; + __entry->flags = flags; ), - TP_printk("timer=%p function=%pf expires=%lu [timeout=%ld]", + TP_printk("timer=%p function=%pf expires=%lu [timeout=%ld] flags=0x%08x", __entry->timer, __entry->function, __entry->expires, - (long)__entry->expires - __entry->now) + (long)__entry->expires - __entry->now, __entry->flags) ); /** diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h index 880dd7437172..c178d13d6f4c 100644 --- a/include/trace/events/writeback.h +++ b/include/trace/events/writeback.h @@ -250,7 +250,6 @@ DEFINE_EVENT(writeback_class, name, \ DEFINE_WRITEBACK_EVENT(writeback_nowork); DEFINE_WRITEBACK_EVENT(writeback_wake_background); DEFINE_WRITEBACK_EVENT(writeback_bdi_register); -DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister); DECLARE_EVENT_CLASS(wbc_class, TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi), diff --git a/include/uapi/drm/radeon_drm.h b/include/uapi/drm/radeon_drm.h index 871e73f99a4d..94d44ab2fda1 100644 --- a/include/uapi/drm/radeon_drm.h +++ b/include/uapi/drm/radeon_drm.h @@ -1038,6 +1038,7 @@ struct drm_radeon_cs { #define RADEON_INFO_CURRENT_GPU_SCLK 0x22 #define RADEON_INFO_CURRENT_GPU_MCLK 0x23 #define RADEON_INFO_READ_REG 0x24 +#define RADEON_INFO_VA_UNMAP_WORKING 0x25 struct drm_radeon_info { uint32_t request; diff --git a/include/linux/cryptouser.h b/include/uapi/linux/cryptouser.h index 4abf2ea6a887..2e67bb64c1da 100644 --- a/include/linux/cryptouser.h +++ b/include/uapi/linux/cryptouser.h @@ -25,6 +25,7 @@ enum { CRYPTO_MSG_DELALG, CRYPTO_MSG_UPDATEALG, CRYPTO_MSG_GETALG, + CRYPTO_MSG_DELRNG, __CRYPTO_MSG_MAX }; #define CRYPTO_MSG_MAX (__CRYPTO_MSG_MAX - 1) @@ -43,6 +44,7 @@ enum crypto_attr_type_t { CRYPTOCFGA_REPORT_COMPRESS, /* struct crypto_report_comp */ CRYPTOCFGA_REPORT_RNG, /* struct crypto_report_rng */ CRYPTOCFGA_REPORT_CIPHER, /* struct crypto_report_cipher */ + CRYPTOCFGA_REPORT_AKCIPHER, /* struct crypto_report_akcipher */ __CRYPTOCFGA_MAX #define CRYPTOCFGA_MAX (__CRYPTOCFGA_MAX - 1) @@ -101,5 +103,9 @@ struct crypto_report_rng { unsigned int seedsize; }; +struct crypto_report_akcipher { + char type[CRYPTO_MAX_NAME]; +}; + #define CRYPTO_REPORT_MAXSIZE (sizeof(struct crypto_user_alg) + \ sizeof(struct crypto_report_blkcipher)) diff --git a/include/uapi/linux/hsi/cs-protocol.h b/include/uapi/linux/hsi/cs-protocol.h index 4957bba57cbe..f153d6ea7c62 100644 --- a/include/uapi/linux/hsi/cs-protocol.h +++ b/include/uapi/linux/hsi/cs-protocol.h @@ -76,6 +76,15 @@ struct cs_buffer_config { }; /* + * struct for monotonic timestamp taken when the + * last control command was received + */ +struct cs_timestamp { + __u32 tv_sec; /* seconds */ + __u32 tv_nsec; /* nanoseconds */ +}; + +/* * Struct describing the layout and contents of the driver mmap area. * This information is meant as read-only information for the application. */ @@ -91,11 +100,8 @@ struct cs_mmap_config_block { __u32 rx_ptr; __u32 rx_ptr_boundary; __u32 reserved3[2]; - /* - * if enabled with CS_FEAT_TSTAMP_RX_CTRL, monotonic - * timestamp taken when the last control command was received - */ - struct timespec tstamp_rx_ctrl; + /* enabled with CS_FEAT_TSTAMP_RX_CTRL */ + struct cs_timestamp tstamp_rx_ctrl; }; #define CS_IO_MAGIC 'C' diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 4b60056776d1..716ad4ae4d4b 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -202,7 +202,7 @@ struct kvm_run { __u32 exit_reason; __u8 ready_for_interrupt_injection; __u8 if_flag; - __u8 padding2[2]; + __u16 flags; /* in (pre_kvm_run), out (post_kvm_run) */ __u64 cr8; @@ -814,6 +814,9 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_S390_INJECT_IRQ 113 #define KVM_CAP_S390_IRQ_STATE 114 #define KVM_CAP_PPC_HWRNG 115 +#define KVM_CAP_DISABLE_QUIRKS 116 +#define KVM_CAP_X86_SMM 117 +#define KVM_CAP_MULTI_ADDRESS_SPACE 118 #ifdef KVM_CAP_IRQ_ROUTING @@ -894,7 +897,7 @@ struct kvm_xen_hvm_config { * * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies * the irqfd to operate in resampling mode for level triggered interrupt - * emlation. See Documentation/virtual/kvm/api.txt. + * emulation. See Documentation/virtual/kvm/api.txt. */ #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1) @@ -1199,6 +1202,8 @@ struct kvm_s390_ucas_mapping { /* Available with KVM_CAP_S390_IRQ_STATE */ #define KVM_S390_SET_IRQ_STATE _IOW(KVMIO, 0xb5, struct kvm_s390_irq_state) #define KVM_S390_GET_IRQ_STATE _IOW(KVMIO, 0xb6, struct kvm_s390_irq_state) +/* Available with KVM_CAP_X86_SMM */ +#define KVM_SMI _IO(KVMIO, 0xb7) #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) #define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) diff --git a/include/uapi/linux/netfilter_bridge/ebtables.h b/include/uapi/linux/netfilter_bridge/ebtables.h index 773dfe8924c7..fd2ee501726d 100644 --- a/include/uapi/linux/netfilter_bridge/ebtables.h +++ b/include/uapi/linux/netfilter_bridge/ebtables.h @@ -6,7 +6,7 @@ * * ebtables.c,v 2.0, April, 2002 * - * This code is stongly inspired on the iptables code which is + * This code is strongly inspired by the iptables code which is * Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling */ diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 309211b3eb67..d97f84c080da 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -167,6 +167,7 @@ enum perf_branch_sample_type_shift { PERF_SAMPLE_BRANCH_COND_SHIFT = 10, /* conditional branches */ PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT = 11, /* call/ret stack */ + PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT = 12, /* indirect jumps */ PERF_SAMPLE_BRANCH_MAX_SHIFT /* non-ABI */ }; @@ -186,6 +187,7 @@ enum perf_branch_sample_type { PERF_SAMPLE_BRANCH_COND = 1U << PERF_SAMPLE_BRANCH_COND_SHIFT, PERF_SAMPLE_BRANCH_CALL_STACK = 1U << PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT, + PERF_SAMPLE_BRANCH_IND_JUMP = 1U << PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT, PERF_SAMPLE_BRANCH_MAX = 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT, }; @@ -564,6 +566,10 @@ struct perf_event_mmap_page { #define PERF_RECORD_MISC_GUEST_USER (5 << 0) /* + * Indicates that /proc/PID/maps parsing are truncated by time out. + */ +#define PERF_RECORD_MISC_PROC_MAP_PARSE_TIMEOUT (1 << 12) +/* * PERF_RECORD_MISC_MMAP_DATA and PERF_RECORD_MISC_COMM_EXEC are used on * different events so can reuse the same bit position. */ @@ -800,6 +806,18 @@ enum perf_event_type { */ PERF_RECORD_ITRACE_START = 12, + /* + * Records the dropped/lost sample number. + * + * struct { + * struct perf_event_header header; + * + * u64 lost; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_LOST_SAMPLES = 13, + PERF_RECORD_MAX, /* non-ABI */ }; diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index b57b750c222f..9fd7b5d8df2f 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -36,6 +36,8 @@ /* Two-stage IOMMU */ #define VFIO_TYPE1_NESTING_IOMMU 6 /* Implies v2 */ +#define VFIO_SPAPR_TCE_v2_IOMMU 7 + /* * The IOCTL interface is designed for extensibility by embedding the * structure length (argsz) and flags into structures passed between @@ -443,6 +445,23 @@ struct vfio_iommu_type1_dma_unmap { /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */ /* + * The SPAPR TCE DDW info struct provides the information about + * the details of Dynamic DMA window capability. + * + * @pgsizes contains a page size bitmask, 4K/64K/16M are supported. + * @max_dynamic_windows_supported tells the maximum number of windows + * which the platform can create. + * @levels tells the maximum number of levels in multi-level IOMMU tables; + * this allows splitting a table into smaller chunks which reduces + * the amount of physically contiguous memory required for the table. + */ +struct vfio_iommu_spapr_tce_ddw_info { + __u64 pgsizes; /* Bitmap of supported page sizes */ + __u32 max_dynamic_windows_supported; + __u32 levels; +}; + +/* * The SPAPR TCE info struct provides the information about the PCI bus * address ranges available for DMA, these values are programmed into * the hardware so the guest has to know that information. @@ -452,14 +471,17 @@ struct vfio_iommu_type1_dma_unmap { * addresses too so the window works as a filter rather than an offset * for IOVA addresses. * - * A flag will need to be added if other page sizes are supported, - * so as defined here, it is always 4k. + * Flags supported: + * - VFIO_IOMMU_SPAPR_INFO_DDW: informs the userspace that dynamic DMA windows + * (DDW) support is present. @ddw is only supported when DDW is present. */ struct vfio_iommu_spapr_tce_info { __u32 argsz; - __u32 flags; /* reserved for future use */ + __u32 flags; +#define VFIO_IOMMU_SPAPR_INFO_DDW (1 << 0) /* DDW supported */ __u32 dma32_window_start; /* 32 bit window start (bytes) */ __u32 dma32_window_size; /* 32 bit window size (bytes) */ + struct vfio_iommu_spapr_tce_ddw_info ddw; }; #define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) @@ -470,12 +492,23 @@ struct vfio_iommu_spapr_tce_info { * - unfreeze IO/DMA for frozen PE; * - read PE state; * - reset PE; - * - configure PE. + * - configure PE; + * - inject EEH error. */ +struct vfio_eeh_pe_err { + __u32 type; + __u32 func; + __u64 addr; + __u64 mask; +}; + struct vfio_eeh_pe_op { __u32 argsz; __u32 flags; __u32 op; + union { + struct vfio_eeh_pe_err err; + }; }; #define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */ @@ -492,9 +525,70 @@ struct vfio_eeh_pe_op { #define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */ #define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */ #define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */ +#define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */ #define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21) +/** + * VFIO_IOMMU_SPAPR_REGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 17, struct vfio_iommu_spapr_register_memory) + * + * Registers user space memory where DMA is allowed. It pins + * user pages and does the locked memory accounting so + * subsequent VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA calls + * get faster. + */ +struct vfio_iommu_spapr_register_memory { + __u32 argsz; + __u32 flags; + __u64 vaddr; /* Process virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; +#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17) + +/** + * VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 18, struct vfio_iommu_spapr_register_memory) + * + * Unregisters user space memory registered with + * VFIO_IOMMU_SPAPR_REGISTER_MEMORY. + * Uses vfio_iommu_spapr_register_memory for parameters. + */ +#define VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 18) + +/** + * VFIO_IOMMU_SPAPR_TCE_CREATE - _IOWR(VFIO_TYPE, VFIO_BASE + 19, struct vfio_iommu_spapr_tce_create) + * + * Creates an additional TCE table and programs it (sets a new DMA window) + * to every IOMMU group in the container. It receives page shift, window + * size and number of levels in the TCE table being created. + * + * It allocates and returns an offset on a PCI bus of the new DMA window. + */ +struct vfio_iommu_spapr_tce_create { + __u32 argsz; + __u32 flags; + /* in */ + __u32 page_shift; + __u64 window_size; + __u32 levels; + /* out */ + __u64 start_addr; +}; +#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19) + +/** + * VFIO_IOMMU_SPAPR_TCE_REMOVE - _IOW(VFIO_TYPE, VFIO_BASE + 20, struct vfio_iommu_spapr_tce_remove) + * + * Unprograms a TCE table from all groups in the container and destroys it. + * It receives a PCI bus offset as a window id. + */ +struct vfio_iommu_spapr_tce_remove { + __u32 argsz; + __u32 flags; + /* in */ + __u64 start_addr; +}; +#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20) + /* ***************************************************************** */ #endif /* _UAPIVFIO_H */ diff --git a/include/uapi/misc/cxl.h b/include/uapi/misc/cxl.h index cd6d789b73ec..99a8ca15fe64 100644 --- a/include/uapi/misc/cxl.h +++ b/include/uapi/misc/cxl.h @@ -32,10 +32,32 @@ struct cxl_ioctl_start_work { #define CXL_START_WORK_ALL (CXL_START_WORK_AMR |\ CXL_START_WORK_NUM_IRQS) + +/* Possible modes that an afu can be in */ +#define CXL_MODE_DEDICATED 0x1 +#define CXL_MODE_DIRECTED 0x2 + +/* possible flags for the cxl_afu_id flags field */ +#define CXL_AFUID_FLAG_SLAVE 0x1 /* In directed-mode afu is in slave mode */ + +struct cxl_afu_id { + __u64 flags; /* One of CXL_AFUID_FLAG_X */ + __u32 card_id; + __u32 afu_offset; + __u32 afu_mode; /* one of the CXL_MODE_X */ + __u32 reserved1; + __u64 reserved2; + __u64 reserved3; + __u64 reserved4; + __u64 reserved5; + __u64 reserved6; +}; + /* ioctl numbers */ #define CXL_MAGIC 0xCA #define CXL_IOCTL_START_WORK _IOW(CXL_MAGIC, 0x00, struct cxl_ioctl_start_work) #define CXL_IOCTL_GET_PROCESS_ELEMENT _IOR(CXL_MAGIC, 0x01, __u32) +#define CXL_IOCTL_GET_AFU_ID _IOR(CXL_MAGIC, 0x02, struct cxl_afu_id) #define CXL_READ_MIN_SIZE 0x1000 /* 4K */ diff --git a/include/uapi/rdma/ib_user_verbs.h b/include/uapi/rdma/ib_user_verbs.h index b513e662d8e4..978841eeaff1 100644 --- a/include/uapi/rdma/ib_user_verbs.h +++ b/include/uapi/rdma/ib_user_verbs.h @@ -91,6 +91,7 @@ enum { enum { IB_USER_VERBS_EX_CMD_QUERY_DEVICE = IB_USER_VERBS_CMD_QUERY_DEVICE, + IB_USER_VERBS_EX_CMD_CREATE_CQ = IB_USER_VERBS_CMD_CREATE_CQ, IB_USER_VERBS_EX_CMD_CREATE_FLOW = IB_USER_VERBS_CMD_THRESHOLD, IB_USER_VERBS_EX_CMD_DESTROY_FLOW, }; @@ -222,6 +223,8 @@ struct ib_uverbs_ex_query_device_resp { __u32 comp_mask; __u32 response_length; struct ib_uverbs_odp_caps odp_caps; + __u64 timestamp_mask; + __u64 hca_core_clock; /* in KHZ */ }; struct ib_uverbs_query_port { @@ -353,11 +356,27 @@ struct ib_uverbs_create_cq { __u64 driver_data[0]; }; +struct ib_uverbs_ex_create_cq { + __u64 user_handle; + __u32 cqe; + __u32 comp_vector; + __s32 comp_channel; + __u32 comp_mask; + __u32 flags; + __u32 reserved; +}; + struct ib_uverbs_create_cq_resp { __u32 cq_handle; __u32 cqe; }; +struct ib_uverbs_ex_create_cq_resp { + struct ib_uverbs_create_cq_resp base; + __u32 comp_mask; + __u32 response_length; +}; + struct ib_uverbs_resize_cq { __u64 response; __u32 cq_handle; diff --git a/include/video/neomagic.h b/include/video/neomagic.h index bc5013e8059d..91e225a6107d 100644 --- a/include/video/neomagic.h +++ b/include/video/neomagic.h @@ -159,10 +159,7 @@ struct neofb_par { unsigned char VCLK3NumeratorHigh; unsigned char VCLK3Denominator; unsigned char VerticalExt; - -#ifdef CONFIG_MTRR - int mtrr; -#endif + int wc_cookie; u8 __iomem *mmio_vbase; u8 cursorOff; u8 *cursorPad; /* Must die !! */ diff --git a/include/video/tdfx.h b/include/video/tdfx.h index befbaf0a92d8..69674b94bb68 100644 --- a/include/video/tdfx.h +++ b/include/video/tdfx.h @@ -196,7 +196,7 @@ struct tdfx_par { u32 palette[16]; void __iomem *regbase_virt; unsigned long iobase; - int mtrr_handle; + int wc_cookie; #ifdef CONFIG_FB_3DFX_I2C struct tdfxfb_i2c_chan chan[2]; #endif |