diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/gpio/driver.h | 8 | ||||
| -rw-r--r-- | include/uapi/linux/gpio.h | 24 |
2 files changed, 32 insertions, 0 deletions
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 5dd9c982e2cb..e2480ef94c55 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -22,6 +22,9 @@ enum gpio_lookup_flags; struct gpio_chip; +#define GPIO_LINE_DIRECTION_IN 1 +#define GPIO_LINE_DIRECTION_OUT 0 + /** * struct gpio_irq_chip - GPIO interrupt controller */ @@ -286,6 +289,9 @@ struct gpio_irq_chip { * state (such as pullup/pulldown configuration). * @init_valid_mask: optional routine to initialize @valid_mask, to be used if * not all GPIOs are valid. + * @add_pin_ranges: optional routine to initialize pin ranges, to be used when + * requires special mapping of the pins that provides GPIO functionality. + * It is called after adding GPIO chip and before adding IRQ chip. * @base: identifies the first GPIO number handled by this chip; * or, if negative during registration, requests dynamic ID allocation. * DEPRECATION: providing anything non-negative and nailing the base @@ -376,6 +382,8 @@ struct gpio_chip { unsigned long *valid_mask, unsigned int ngpios); + int (*add_pin_ranges)(struct gpio_chip *chip); + int base; u16 ngpio; const char *const *names; diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h index 4ebfe0ac6c5b..799cf823d493 100644 --- a/include/uapi/linux/gpio.h +++ b/include/uapi/linux/gpio.h @@ -33,6 +33,9 @@ struct gpiochip_info { #define GPIOLINE_FLAG_ACTIVE_LOW (1UL << 2) #define GPIOLINE_FLAG_OPEN_DRAIN (1UL << 3) #define GPIOLINE_FLAG_OPEN_SOURCE (1UL << 4) +#define GPIOLINE_FLAG_BIAS_PULL_UP (1UL << 5) +#define GPIOLINE_FLAG_BIAS_PULL_DOWN (1UL << 6) +#define GPIOLINE_FLAG_BIAS_DISABLE (1UL << 7) /** * struct gpioline_info - Information about a certain GPIO line @@ -62,6 +65,9 @@ struct gpioline_info { #define GPIOHANDLE_REQUEST_ACTIVE_LOW (1UL << 2) #define GPIOHANDLE_REQUEST_OPEN_DRAIN (1UL << 3) #define GPIOHANDLE_REQUEST_OPEN_SOURCE (1UL << 4) +#define GPIOHANDLE_REQUEST_BIAS_PULL_UP (1UL << 5) +#define GPIOHANDLE_REQUEST_BIAS_PULL_DOWN (1UL << 6) +#define GPIOHANDLE_REQUEST_BIAS_DISABLE (1UL << 7) /** * struct gpiohandle_request - Information about a GPIO handle request @@ -95,6 +101,24 @@ struct gpiohandle_request { }; /** + * struct gpiohandle_config - Configuration for a GPIO handle request + * @flags: updated flags for the requested GPIO lines, such as + * GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_ACTIVE_LOW etc, OR:ed + * together + * @default_values: if the GPIOHANDLE_REQUEST_OUTPUT is set in flags, + * this specifies the default output value, should be 0 (low) or + * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high) + * @padding: reserved for future use and should be zero filled + */ +struct gpiohandle_config { + __u32 flags; + __u8 default_values[GPIOHANDLES_MAX]; + __u32 padding[4]; /* padding for future use */ +}; + +#define GPIOHANDLE_SET_CONFIG_IOCTL _IOWR(0xB4, 0x0a, struct gpiohandle_config) + +/** * struct gpiohandle_data - Information of values on a GPIO handle * @values: when getting the state of lines this contains the current * state of a line, when setting the state of lines these should contain |