diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/platform_data/spi-ep93xx.h | 4 | ||||
| -rw-r--r-- | include/linux/spi/pxa2xx_spi.h | 1 | ||||
| -rw-r--r-- | include/linux/spi/spi-mem.h | 12 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 24 | ||||
| -rw-r--r-- | include/linux/spi/spi_bitbang.h | 1 | ||||
| -rw-r--r-- | include/trace/events/spi.h | 10 | ||||
| -rw-r--r-- | include/uapi/linux/spi/spidev.h | 6 |
7 files changed, 44 insertions, 14 deletions
diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h index eb16c6739ac2..b439f2a896e0 100644 --- a/include/linux/platform_data/spi-ep93xx.h +++ b/include/linux/platform_data/spi-ep93xx.h @@ -6,13 +6,9 @@ struct spi_device; /** * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @chipselect: array of gpio numbers to use as chip selects - * @num_chipselect: ARRAY_SIZE(chipselect) * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { - int *chipselect; - int num_chipselect; bool use_dma; }; diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h index c1c59473cef9..6005f0126631 100644 --- a/include/linux/spi/pxa2xx_spi.h +++ b/include/linux/spi/pxa2xx_spi.h @@ -25,6 +25,7 @@ struct dma_chan; struct pxa2xx_spi_controller { u16 num_chipselect; u8 enable_dma; + u8 dma_burst_size; bool is_slave; /* DMA engine specific config */ diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index 3703d0dcac2e..af9ff2f0f1b2 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -295,6 +295,10 @@ int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, const struct spi_mem_op *op, struct sg_table *sg); + +bool spi_mem_default_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op); + #else static inline int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, @@ -310,6 +314,14 @@ spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, struct sg_table *sg) { } + +static inline +bool spi_mem_default_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + return false; +} + #endif /* CONFIG_SPI_MEM */ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 662b336aa2e4..053abd22ad31 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -143,7 +143,7 @@ struct spi_device { u32 max_speed_hz; u8 chip_select; u8 bits_per_word; - u16 mode; + u32 mode; #define SPI_CPHA 0x01 /* clock phase */ #define SPI_CPOL 0x02 /* clock polarity */ #define SPI_MODE_0 (0|0) /* (original MicroWire) */ @@ -330,6 +330,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * must fail if an unrecognized or unsupported mode is requested. * It's always safe to call this unless transfers are pending on * the device whose settings are being modified. + * @set_cs_timing: optional hook for SPI devices to request SPI master + * controller for configuring specific CS setup time, hold time and inactive + * delay interms of clock counts * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state * @can_dma: determine whether this controller supports DMA @@ -363,6 +366,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @unprepare_transfer_hardware: there are currently no more messages on the * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call + * * @set_cs: set the logic level of the chip select line. May be called * from interrupt context. * @prepare_message: set up the controller to transfer a single message, @@ -439,13 +443,12 @@ struct spi_controller { u16 dma_alignment; /* spi_device.mode flags understood by this controller driver */ - u16 mode_bits; + u32 mode_bits; /* bitmask of supported bits_per_word for transfers */ u32 bits_per_word_mask; #define SPI_BPW_MASK(bits) BIT((bits) - 1) -#define SPI_BIT_MASK(bits) (((bits) == 32) ? ~0U : (BIT(bits) - 1)) -#define SPI_BPW_RANGE_MASK(min, max) (SPI_BIT_MASK(max) - SPI_BIT_MASK(min - 1)) +#define SPI_BPW_RANGE_MASK(min, max) GENMASK((max) - 1, (min) - 1) /* limits on transfer speed */ u32 min_speed_hz; @@ -489,6 +492,17 @@ struct spi_controller { */ int (*setup)(struct spi_device *spi); + /* + * set_cs_timing() method is for SPI controllers that supports + * configuring CS timing. + * + * This hook allows SPI client drivers to request SPI controllers + * to configure specific CS timing through spi_set_cs_timing() after + * spi_setup(). + */ + void (*set_cs_timing)(struct spi_device *spi, u8 setup_clk_cycles, + u8 hold_clk_cycles, u8 inactive_clk_cycles); + /* bidirectional bulk transfers * * + The transfer() method may not sleep; its main role is @@ -1277,7 +1291,7 @@ struct spi_board_info { /* mode becomes spi_device.mode, and is essential for chips * where the default of SPI_CS_HIGH = 0 is wrong. */ - u16 mode; + u32 mode; /* ... may need additional spi_device chip config data here. * avoid stuff protocol drivers can set; but include stuff diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index b7e021b274dc..4444c2a992cb 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -44,6 +44,7 @@ extern int spi_bitbang_setup_transfer(struct spi_device *spi, /* start or stop queue processing */ extern int spi_bitbang_start(struct spi_bitbang *spi); +extern int spi_bitbang_init(struct spi_bitbang *spi); extern void spi_bitbang_stop(struct spi_bitbang *spi); #endif /* __SPI_BITBANG_H */ diff --git a/include/trace/events/spi.h b/include/trace/events/spi.h index aef6869f563d..0dd9171d2ad8 100644 --- a/include/trace/events/spi.h +++ b/include/trace/events/spi.h @@ -131,9 +131,11 @@ DECLARE_EVENT_CLASS(spi_transfer, __field( struct spi_transfer *, xfer ) __field( int, len ) __dynamic_array(u8, rx_buf, - spi_valid_rxbuf(msg, xfer) ? xfer->len : 0) + spi_valid_rxbuf(msg, xfer) ? + (xfer->len < 64 ? xfer->len : 64) : 0) __dynamic_array(u8, tx_buf, - spi_valid_txbuf(msg, xfer) ? xfer->len : 0) + spi_valid_txbuf(msg, xfer) ? + (xfer->len < 64 ? xfer->len : 64) : 0) ), TP_fast_assign( @@ -144,11 +146,11 @@ DECLARE_EVENT_CLASS(spi_transfer, if (spi_valid_txbuf(msg, xfer)) memcpy(__get_dynamic_array(tx_buf), - xfer->tx_buf, xfer->len); + xfer->tx_buf, __get_dynamic_array_len(tx_buf)); if (spi_valid_rxbuf(msg, xfer)) memcpy(__get_dynamic_array(rx_buf), - xfer->rx_buf, xfer->len); + xfer->rx_buf, __get_dynamic_array_len(rx_buf)); ), TP_printk("spi%d.%d %p len=%d tx=[%*phD] rx=[%*phD]", diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index c4253f0090d8..ee0f2460bff6 100644 --- a/include/uapi/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h @@ -66,6 +66,9 @@ * @delay_usecs: If nonzero, how long to delay after the last bit transfer * before optionally deselecting the device before the next transfer. * @cs_change: True to deselect device before starting the next transfer. + * @word_delay_usecs: If nonzero, how long to wait between words within one + * transfer. This property needs explicit support in the SPI controller, + * otherwise it is silently ignored. * * This structure is mapped directly to the kernel spi_transfer structure; * the fields have the same meanings, except of course that the pointers @@ -100,7 +103,8 @@ struct spi_ioc_transfer { __u8 cs_change; __u8 tx_nbits; __u8 rx_nbits; - __u16 pad; + __u8 word_delay_usecs; + __u8 pad; /* If the contents of 'struct spi_ioc_transfer' ever change * incompatibly, then the ioctl number (currently 0) must change; |