summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-generic/uaccess.h1
-rw-r--r--include/linux/fs.h8
-rw-r--r--include/linux/mdev.h2
-rw-r--r--include/linux/mmc/card.h3
-rw-r--r--include/linux/mmc/host.h12
-rw-r--r--include/linux/mmc/sd.h6
-rw-r--r--include/linux/mmc/slot-gpio.h2
-rw-r--r--include/linux/mtd/rawnand.h26
-rw-r--r--include/linux/mtd/spi-nor.h16
-rw-r--r--include/linux/regmap.h31
10 files changed, 75 insertions, 32 deletions
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index d82c78a79da5..b3d2241e03f8 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -22,7 +22,6 @@
#endif
#ifndef get_fs
-#define get_ds() (KERNEL_DS)
#define get_fs() (current_thread_info()->addr_limit)
static inline void set_fs(mm_segment_t fs)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 29d8e2cfed0e..fd423fec8d83 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -304,13 +304,19 @@ enum rw_hint {
struct kiocb {
struct file *ki_filp;
+
+ /* The 'ki_filp' pointer is shared in a union for aio */
+ randomized_struct_fields_start
+
loff_t ki_pos;
void (*ki_complete)(struct kiocb *iocb, long ret, long ret2);
void *private;
int ki_flags;
u16 ki_hint;
u16 ki_ioprio; /* See linux/ioprio.h */
-} __randomize_layout;
+
+ randomized_struct_fields_end
+};
static inline bool is_sync_kiocb(struct kiocb *kiocb)
{
diff --git a/include/linux/mdev.h b/include/linux/mdev.h
index b6e048e1045f..d7aee90e5da5 100644
--- a/include/linux/mdev.h
+++ b/include/linux/mdev.h
@@ -120,7 +120,7 @@ struct mdev_driver {
extern void *mdev_get_drvdata(struct mdev_device *mdev);
extern void mdev_set_drvdata(struct mdev_device *mdev, void *data);
-extern uuid_le mdev_uuid(struct mdev_device *mdev);
+extern const guid_t *mdev_uuid(struct mdev_device *mdev);
extern struct bus_type mdev_bus_type;
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 8ef330027b13..19566ab9decb 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -133,6 +133,8 @@ struct mmc_ext_csd {
struct sd_scr {
unsigned char sda_vsn;
unsigned char sda_spec3;
+ unsigned char sda_spec4;
+ unsigned char sda_specx;
unsigned char bus_widths;
#define SD_SCR_BUS_WIDTH_1 (1<<0)
#define SD_SCR_BUS_WIDTH_4 (1<<2)
@@ -277,6 +279,7 @@ struct mmc_card {
unsigned int erase_shift; /* if erase unit is power 2 */
unsigned int pref_erase; /* in sectors */
unsigned int eg_boundary; /* don't cross erase-group boundaries */
+ unsigned int erase_arg; /* erase / trim / discard */
u8 erased_byte; /* value of erased bytes */
u32 raw_cid[4]; /* raw card CID */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 4d35ff36ceff..43d0f0c496f6 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -478,6 +478,11 @@ static inline void *mmc_priv(struct mmc_host *host)
return (void *)host->private;
}
+static inline struct mmc_host *mmc_from_priv(void *priv)
+{
+ return container_of(priv, struct mmc_host, private);
+}
+
#define mmc_host_is_spi(host) ((host)->caps & MMC_CAP_SPI)
#define mmc_dev(x) ((x)->parent)
@@ -502,17 +507,11 @@ void sdio_run_irqs(struct mmc_host *host);
void sdio_signal_irq(struct mmc_host *host);
#ifdef CONFIG_REGULATOR
-int mmc_regulator_get_ocrmask(struct regulator *supply);
int mmc_regulator_set_ocr(struct mmc_host *mmc,
struct regulator *supply,
unsigned short vdd_bit);
int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios);
#else
-static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
-{
- return 0;
-}
-
static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
struct regulator *supply,
unsigned short vdd_bit)
@@ -527,7 +526,6 @@ static inline int mmc_regulator_set_vqmmc(struct mmc_host *mmc,
}
#endif
-u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
int mmc_regulator_get_supply(struct mmc_host *mmc);
static inline int mmc_card_is_removable(struct mmc_host *host)
diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
index 1ebcf9ba1256..ec94a5aa02bb 100644
--- a/include/linux/mmc/sd.h
+++ b/include/linux/mmc/sd.h
@@ -91,4 +91,10 @@
#define SD_SWITCH_ACCESS_DEF 0
#define SD_SWITCH_ACCESS_HS 1
+/*
+ * Erase/discard
+ */
+#define SD_ERASE_ARG 0x00000000
+#define SD_DISCARD_ARG 0x00000001
+
#endif /* LINUX_MMC_SD_H */
diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h
index feebd7aa6f5c..9fd3ce64a885 100644
--- a/include/linux/mmc/slot-gpio.h
+++ b/include/linux/mmc/slot-gpio.h
@@ -22,7 +22,7 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
unsigned int idx, bool override_active_level,
unsigned int debounce, bool *gpio_invert);
int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
- unsigned int idx, bool override_active_level,
+ unsigned int idx,
unsigned int debounce, bool *gpio_invert);
void mmc_gpio_set_cd_isr(struct mmc_host *host,
irqreturn_t (*isr)(int irq, void *dev_id));
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 33e240acdc6d..b7445a44a814 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -16,13 +16,12 @@
#ifndef __LINUX_MTD_RAWNAND_H
#define __LINUX_MTD_RAWNAND_H
-#include <linux/wait.h>
-#include <linux/spinlock.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/flashchip.h>
#include <linux/mtd/bbm.h>
#include <linux/mtd/jedec.h>
#include <linux/mtd/onfi.h>
+#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/types.h>
@@ -897,25 +896,17 @@ struct nand_controller_ops {
/**
* struct nand_controller - Structure used to describe a NAND controller
*
- * @lock: protection lock
- * @active: the mtd device which holds the controller currently
- * @wq: wait queue to sleep on if a NAND operation is in
- * progress used instead of the per chip wait queue
- * when a hw controller is available.
+ * @lock: lock used to serialize accesses to the NAND controller
* @ops: NAND controller operations.
*/
struct nand_controller {
- spinlock_t lock;
- struct nand_chip *active;
- wait_queue_head_t wq;
+ struct mutex lock;
const struct nand_controller_ops *ops;
};
static inline void nand_controller_init(struct nand_controller *nfc)
{
- nfc->active = NULL;
- spin_lock_init(&nfc->lock);
- init_waitqueue_head(&nfc->wq);
+ mutex_init(&nfc->lock);
}
/**
@@ -936,7 +927,6 @@ static inline void nand_controller_init(struct nand_controller *nfc)
* @waitfunc: hardware specific function for wait on ready.
* @block_bad: check if a block is bad, using OOB markers
* @block_markbad: mark a block bad
- * @erase: erase function
* @set_features: set the NAND chip features
* @get_features: get the NAND chip features
* @chip_delay: chip dependent delay for transferring data from array to read
@@ -962,7 +952,6 @@ struct nand_legacy {
int (*waitfunc)(struct nand_chip *chip);
int (*block_bad)(struct nand_chip *chip, loff_t ofs);
int (*block_markbad)(struct nand_chip *chip, loff_t ofs);
- int (*erase)(struct nand_chip *chip, int page);
int (*set_features)(struct nand_chip *chip, int feature_addr,
u8 *subfeature_para);
int (*get_features)(struct nand_chip *chip, int feature_addr,
@@ -983,7 +972,6 @@ struct nand_legacy {
* setting the read-retry mode. Mostly needed for MLC NAND.
* @ecc: [BOARDSPECIFIC] ECC control structure
* @buf_align: minimum buffer alignment required by a platform
- * @state: [INTERN] the current state of the NAND device
* @oob_poi: "poison value buffer," used for laying out OOB data
* before writing
* @page_shift: [INTERN] number of address bits in a page (column
@@ -1034,6 +1022,9 @@ struct nand_legacy {
* cur_cs < numchips. NAND Controller drivers should not
* modify this value, but they're allowed to read it.
* @read_retries: [INTERN] the number of read retry modes supported
+ * @lock: lock protecting the suspended field. Also used to
+ * serialize accesses to the NAND device.
+ * @suspended: set to 1 when the device is suspended, 0 when it's not.
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
@@ -1088,7 +1079,8 @@ struct nand_chip {
int read_retries;
- flstate_t state;
+ struct mutex lock;
+ unsigned int suspended : 1;
uint8_t *oob_poi;
struct nand_controller *controller;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index fa2d89e38e40..b3d360b0ee3d 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -46,9 +46,13 @@
#define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */
#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad Output SPI) */
#define SPINOR_OP_READ_1_4_4 0xeb /* Read data bytes (Quad I/O SPI) */
+#define SPINOR_OP_READ_1_1_8 0x8b /* Read data bytes (Octal Output SPI) */
+#define SPINOR_OP_READ_1_8_8 0xcb /* Read data bytes (Octal I/O SPI) */
#define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */
#define SPINOR_OP_PP_1_1_4 0x32 /* Quad page program */
#define SPINOR_OP_PP_1_4_4 0x38 /* Quad page program */
+#define SPINOR_OP_PP_1_1_8 0x82 /* Octal page program */
+#define SPINOR_OP_PP_1_8_8 0xc2 /* Octal page program */
#define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */
#define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
#define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */
@@ -69,9 +73,13 @@
#define SPINOR_OP_READ_1_2_2_4B 0xbc /* Read data bytes (Dual I/O SPI) */
#define SPINOR_OP_READ_1_1_4_4B 0x6c /* Read data bytes (Quad Output SPI) */
#define SPINOR_OP_READ_1_4_4_4B 0xec /* Read data bytes (Quad I/O SPI) */
+#define SPINOR_OP_READ_1_1_8_4B 0x7c /* Read data bytes (Octal Output SPI) */
+#define SPINOR_OP_READ_1_8_8_4B 0xcc /* Read data bytes (Octal I/O SPI) */
#define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */
#define SPINOR_OP_PP_1_1_4_4B 0x34 /* Quad page program */
#define SPINOR_OP_PP_1_4_4_4B 0x3e /* Quad page program */
+#define SPINOR_OP_PP_1_1_8_4B 0x84 /* Octal page program */
+#define SPINOR_OP_PP_1_8_8_4B 0x8e /* Octal page program */
#define SPINOR_OP_BE_4K_4B 0x21 /* Erase 4KiB block */
#define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */
#define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */
@@ -458,7 +466,7 @@ struct spi_nor_hwcaps {
/*
*(Fast) Read capabilities.
* MUST be ordered by priority: the higher bit position, the higher priority.
- * As a matter of performances, it is relevant to use Octo SPI protocols first,
+ * As a matter of performances, it is relevant to use Octal SPI protocols first,
* then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
* (Slow) Read.
*/
@@ -479,7 +487,7 @@ struct spi_nor_hwcaps {
#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
-#define SNOR_HWCPAS_READ_OCTO GENMASK(14, 11)
+#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11)
#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
@@ -488,7 +496,7 @@ struct spi_nor_hwcaps {
/*
* Page Program capabilities.
* MUST be ordered by priority: the higher bit position, the higher priority.
- * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the
+ * Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
* legacy SPI 1-1-1 protocol.
* Note that Dual Page Programs are not supported because there is no existing
* JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
@@ -502,7 +510,7 @@ struct spi_nor_hwcaps {
#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
-#define SNOR_HWCAPS_PP_OCTO GENMASK(22, 20)
+#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20)
#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 1781b6cb793c..daeec7dbd65c 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1131,11 +1131,37 @@ struct regmap_irq {
.reg_offset = (_id) / (_reg_bits), \
}
+#define REGMAP_IRQ_MAIN_REG_OFFSET(arr) \
+ { .num_regs = ARRAY_SIZE((arr)), .offset = &(arr)[0] }
+
+struct regmap_irq_sub_irq_map {
+ unsigned int num_regs;
+ unsigned int *offset;
+};
+
/**
* struct regmap_irq_chip - Description of a generic regmap irq_chip.
*
* @name: Descriptive name for IRQ controller.
*
+ * @main_status: Base main status register address. For chips which have
+ * interrupts arranged in separate sub-irq blocks with own IRQ
+ * registers and which have a main IRQ registers indicating
+ * sub-irq blocks with unhandled interrupts. For such chips fill
+ * sub-irq register information in status_base, mask_base and
+ * ack_base.
+ * @num_main_status_bits: Should be given to chips where number of meaningfull
+ * main status bits differs from num_regs.
+ * @sub_reg_offsets: arrays of mappings from main register bits to sub irq
+ * registers. First item in array describes the registers
+ * for first main status bit. Second array for second bit etc.
+ * Offset is given as sub register status offset to
+ * status_base. Should contain num_regs arrays.
+ * Can be provided for chips with more complex mapping than
+ * 1.st bit to 1.st sub-reg, 2.nd bit to 2.nd sub-reg, ...
+ * @num_main_regs: Number of 'main status' irq registers for chips which have
+ * main_status set.
+ *
* @status_base: Base status register address.
* @mask_base: Base mask register address.
* @mask_writeonly: Base mask register is write only.
@@ -1181,6 +1207,11 @@ struct regmap_irq {
struct regmap_irq_chip {
const char *name;
+ unsigned int main_status;
+ unsigned int num_main_status_bits;
+ struct regmap_irq_sub_irq_map *sub_reg_offsets;
+ int num_main_regs;
+
unsigned int status_base;
unsigned int mask_base;
unsigned int unmask_base;
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-16 00:34:40 +0300