diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/drm/drm_fb_helper.h | 2 | ||||
| -rw-r--r-- | include/linux/hsi/hsi.h | 2 | ||||
| -rw-r--r-- | include/linux/kfifo.h | 2 | ||||
| -rw-r--r-- | include/linux/pipe_fs_i.h | 2 | ||||
| -rw-r--r-- | include/linux/skbuff.h | 2 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 8 | ||||
| -rw-r--r-- | include/linux/usb/composite.h | 2 | ||||
| -rw-r--r-- | include/net/mac80211.h | 6 |
8 files changed, 13 insertions, 13 deletions
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 471f276ce8f7..0145b948b147 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -55,7 +55,7 @@ struct drm_fb_helper_surface_size { * save the current lut when force-restoring the fbdev for e.g. * kdbg. * @fb_probe: Driver callback to allocate and initialize the fbdev info - * structure. Futhermore it also needs to allocate the drm + * structure. Furthermore it also needs to allocate the drm * framebuffer used to back the fbdev. * @initial_config: Setup an initial fbdev display configuration * diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h index 0dca785288cf..39bfd5b89077 100644 --- a/include/linux/hsi/hsi.h +++ b/include/linux/hsi/hsi.h @@ -178,7 +178,7 @@ static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv) * @complete: Transfer completion callback * @destructor: Destructor to free resources when flushing * @status: Status of the transfer when completed - * @actual_len: Actual length of data transfered on completion + * @actual_len: Actual length of data transferred on completion * @channel: Channel were to TX/RX the message * @ttype: Transfer type (TX if set, RX otherwise) * @break_frame: if true HSI will send/receive a break frame. Data buffers are diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 552d51efb429..554fde3a3927 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -722,7 +722,7 @@ __kfifo_uint_must_check_helper( \ /** * kfifo_dma_out_finish - finish a DMA OUT operation * @fifo: address of the fifo to be used - * @len: number of bytes transferd + * @len: number of bytes transferrd * * This macro finish a DMA OUT operation. The out counter will be updated by * the len parameter. No error checking will be done. diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index b8809fef61f5..11982d0ce11b 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -35,7 +35,7 @@ struct pipe_buffer { * @tmp_page: cached released page * @readers: number of current readers of this pipe * @writers: number of current writers of this pipe - * @files: number of struct file refering this pipe (protected by ->i_lock) + * @files: number of struct file referring this pipe (protected by ->i_lock) * @waiting_writers: number of writers blocked waiting for room * @r_counter: reader counter * @w_counter: writer counter diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 215b5ea1cb30..cde842513df2 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1951,7 +1951,7 @@ static inline void skb_propagate_pfmemalloc(struct page *page, } /** - * skb_frag_page - retrieve the page refered to by a paged fragment + * skb_frag_page - retrieve the page referred to by a paged fragment * @frag: the paged fragment * * Returns the &struct page associated with @frag. diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 8c62ba74dd91..8d3a37bc6110 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -234,7 +234,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @mode_bits: flags understood by this controller driver * @bits_per_word_mask: A mask indicating which values of bits_per_word are * supported by the driver. Bit n indicates that a bits_per_word n+1 is - * suported. If set, the SPI core will reject any transfer with an + * supported. If set, the SPI core will reject any transfer with an * unsupported bits_per_word. If not set, this value is simply ignored, * and it's up to the individual driver to perform any validation. * @min_speed_hz: Lowest supported transfer speed @@ -259,7 +259,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cur_msg: the currently in-flight message * @cur_msg_prepared: spi_prepare_message was called for the currently * in-flight message - * @xfer_completion: used by core tranfer_one_message() + * @xfer_completion: used by core transfer_one_message() * @busy: message pump is busy * @running: message pump is running * @rt: whether this queue is set to run as a realtime task @@ -493,7 +493,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * @rx_buf: data to be read (dma-safe memory), or NULL * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped - * @tx_nbits: number of bits used for writting. If 0 the default + * @tx_nbits: number of bits used for writing. If 0 the default * (SPI_NBITS_SINGLE) is used. * @rx_nbits: number of bits used for reading. If 0 the default * (SPI_NBITS_SINGLE) is used. @@ -551,7 +551,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * by the results of previous messages and where the whole transaction * ends when the chipselect goes intactive. * - * When SPI can transfer in 1x,2x or 4x. It can get this tranfer information + * When SPI can transfer in 1x,2x or 4x. It can get this transfer information * from device through @tx_nbits and @rx_nbits. In Bi-direction, these * two should both be set. User can set transfer mode with SPI_NBITS_SINGLE(1x) * SPI_NBITS_DUAL(2x) and SPI_NBITS_QUAD(4x) to support these three transfer. diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 5e61589fc166..0e7a555cab1e 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -92,7 +92,7 @@ struct usb_configuration; * @suspend: Notifies functions when the host stops sending USB traffic. * @resume: Notifies functions when the host restarts USB traffic. * @get_status: Returns function status as a reply to - * GetStatus() request when the recepient is Interface. + * GetStatus() request when the recipient is Interface. * @func_suspend: callback to be called when * SetFeature(FUNCTION_SUSPEND) is reseived * diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7ceed99a05bc..6b79bfc98175 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1841,7 +1841,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * * Driver informs U-APSD client support by enabling * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the - * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS + * uapsd parameter in conf_tx() operation. Hardware needs to send the QoS * Nullfunc frames and stay awake until the service period has ended. To * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames * from that AC are transmitted with powersave enabled. @@ -2047,7 +2047,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * with the number of frames to be released and which TIDs they are * to come from. In this case, the driver is responsible for setting * the EOSP (for uAPSD) and MORE_DATA bits in the released frames, - * to help the @more_data paramter is passed to tell the driver if + * to help the @more_data parameter is passed to tell the driver if * there is more data on other TIDs -- the TIDs to release frames * from are ignored since mac80211 doesn't know how many frames the * buffers for those TIDs contain. @@ -2592,7 +2592,7 @@ enum ieee80211_roc_type { * parameters. In the case where the driver buffers some frames for * sleeping stations mac80211 will use this callback to tell the driver * to release some frames, either for PS-poll or uAPSD. - * Note that if the @more_data paramter is %false the driver must check + * Note that if the @more_data parameter is %false the driver must check * if there are more frames on the given TIDs, and if there are more than * the frames being released then it must still set the more-data bit in * the frame. If the @more_data parameter is %true, then of course the |