diff options
Diffstat (limited to 'include/uapi')
70 files changed, 2582 insertions, 202 deletions
diff --git a/include/uapi/asm-generic/hugetlb_encode.h b/include/uapi/asm-generic/hugetlb_encode.h index b0f8e87235bd..4f3d5aaa11f5 100644 --- a/include/uapi/asm-generic/hugetlb_encode.h +++ b/include/uapi/asm-generic/hugetlb_encode.h @@ -20,6 +20,7 @@ #define HUGETLB_FLAG_ENCODE_SHIFT 26 #define HUGETLB_FLAG_ENCODE_MASK 0x3f +#define HUGETLB_FLAG_ENCODE_16KB (14 << HUGETLB_FLAG_ENCODE_SHIFT) #define HUGETLB_FLAG_ENCODE_64KB (16 << HUGETLB_FLAG_ENCODE_SHIFT) #define HUGETLB_FLAG_ENCODE_512KB (19 << HUGETLB_FLAG_ENCODE_SHIFT) #define HUGETLB_FLAG_ENCODE_1MB (20 << HUGETLB_FLAG_ENCODE_SHIFT) diff --git a/include/uapi/asm-generic/siginfo.h b/include/uapi/asm-generic/siginfo.h index cb3d6c267181..7aacf9389010 100644 --- a/include/uapi/asm-generic/siginfo.h +++ b/include/uapi/asm-generic/siginfo.h @@ -229,7 +229,9 @@ typedef struct siginfo { #define SEGV_ACCADI 5 /* ADI not enabled for mapped object */ #define SEGV_ADIDERR 6 /* Disrupting MCD error */ #define SEGV_ADIPERR 7 /* Precise MCD exception */ -#define NSIGSEGV 7 +#define SEGV_MTEAERR 8 /* Asynchronous ARM MTE error */ +#define SEGV_MTESERR 9 /* Synchronous ARM MTE exception */ +#define NSIGSEGV 9 /* * SIGBUS si_codes diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h index 995b36c2ea7d..2056318988f7 100644 --- a/include/uapi/asm-generic/unistd.h +++ b/include/uapi/asm-generic/unistd.h @@ -140,7 +140,7 @@ __SYSCALL(__NR_renameat, sys_renameat) #define __NR_umount2 39 __SYSCALL(__NR_umount2, sys_umount) #define __NR_mount 40 -__SC_COMP(__NR_mount, sys_mount, compat_sys_mount) +__SYSCALL(__NR_mount, sys_mount) #define __NR_pivot_root 41 __SYSCALL(__NR_pivot_root, sys_pivot_root) @@ -207,9 +207,9 @@ __SYSCALL(__NR_read, sys_read) #define __NR_write 64 __SYSCALL(__NR_write, sys_write) #define __NR_readv 65 -__SC_COMP(__NR_readv, sys_readv, compat_sys_readv) +__SC_COMP(__NR_readv, sys_readv, sys_readv) #define __NR_writev 66 -__SC_COMP(__NR_writev, sys_writev, compat_sys_writev) +__SC_COMP(__NR_writev, sys_writev, sys_writev) #define __NR_pread64 67 __SC_COMP(__NR_pread64, sys_pread64, compat_sys_pread64) #define __NR_pwrite64 68 @@ -237,7 +237,7 @@ __SC_COMP(__NR_signalfd4, sys_signalfd4, compat_sys_signalfd4) /* fs/splice.c */ #define __NR_vmsplice 75 -__SC_COMP(__NR_vmsplice, sys_vmsplice, compat_sys_vmsplice) +__SYSCALL(__NR_vmsplice, sys_vmsplice) #define __NR_splice 76 __SYSCALL(__NR_splice, sys_splice) #define __NR_tee 77 @@ -727,11 +727,9 @@ __SYSCALL(__NR_setns, sys_setns) #define __NR_sendmmsg 269 __SC_COMP(__NR_sendmmsg, sys_sendmmsg, compat_sys_sendmmsg) #define __NR_process_vm_readv 270 -__SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \ - compat_sys_process_vm_readv) +__SYSCALL(__NR_process_vm_readv, sys_process_vm_readv) #define __NR_process_vm_writev 271 -__SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \ - compat_sys_process_vm_writev) +__SYSCALL(__NR_process_vm_writev, sys_process_vm_writev) #define __NR_kcmp 272 __SYSCALL(__NR_kcmp, sys_kcmp) #define __NR_finit_module 273 @@ -859,9 +857,11 @@ __SYSCALL(__NR_openat2, sys_openat2) __SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd) #define __NR_faccessat2 439 __SYSCALL(__NR_faccessat2, sys_faccessat2) +#define __NR_process_madvise 440 +__SYSCALL(__NR_process_madvise, sys_process_madvise) #undef __NR_syscalls -#define __NR_syscalls 440 +#define __NR_syscalls 441 /* * 32 bit systems traditionally used different diff --git a/include/uapi/drm/amdgpu_drm.h b/include/uapi/drm/amdgpu_drm.h index 3218576e109d..c5ff2b275fcd 100644 --- a/include/uapi/drm/amdgpu_drm.h +++ b/include/uapi/drm/amdgpu_drm.h @@ -673,6 +673,7 @@ struct drm_amdgpu_cs_chunk_data { */ #define AMDGPU_IDS_FLAGS_FUSION 0x1 #define AMDGPU_IDS_FLAGS_PREEMPTION 0x2 +#define AMDGPU_IDS_FLAGS_TMZ 0x4 /* indicate if acceleration can be working */ #define AMDGPU_INFO_ACCEL_WORKING 0x00 diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index deea447e5f22..863eda048265 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -332,14 +332,19 @@ struct drm_mode_get_encoder { /* This is for connectors with multiple signal types. */ /* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */ enum drm_mode_subconnector { - DRM_MODE_SUBCONNECTOR_Automatic = 0, - DRM_MODE_SUBCONNECTOR_Unknown = 0, - DRM_MODE_SUBCONNECTOR_DVID = 3, - DRM_MODE_SUBCONNECTOR_DVIA = 4, - DRM_MODE_SUBCONNECTOR_Composite = 5, - DRM_MODE_SUBCONNECTOR_SVIDEO = 6, - DRM_MODE_SUBCONNECTOR_Component = 8, - DRM_MODE_SUBCONNECTOR_SCART = 9, + DRM_MODE_SUBCONNECTOR_Automatic = 0, /* DVI-I, TV */ + DRM_MODE_SUBCONNECTOR_Unknown = 0, /* DVI-I, TV, DP */ + DRM_MODE_SUBCONNECTOR_VGA = 1, /* DP */ + DRM_MODE_SUBCONNECTOR_DVID = 3, /* DVI-I DP */ + DRM_MODE_SUBCONNECTOR_DVIA = 4, /* DVI-I */ + DRM_MODE_SUBCONNECTOR_Composite = 5, /* TV */ + DRM_MODE_SUBCONNECTOR_SVIDEO = 6, /* TV */ + DRM_MODE_SUBCONNECTOR_Component = 8, /* TV */ + DRM_MODE_SUBCONNECTOR_SCART = 9, /* TV */ + DRM_MODE_SUBCONNECTOR_DisplayPort = 10, /* DP */ + DRM_MODE_SUBCONNECTOR_HDMIA = 11, /* DP */ + DRM_MODE_SUBCONNECTOR_Native = 15, /* DP */ + DRM_MODE_SUBCONNECTOR_Wireless = 18, /* DP */ }; #define DRM_MODE_CONNECTOR_Unknown 0 diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index 00546062e023..fa1f3d62f9a6 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -619,6 +619,12 @@ typedef struct drm_i915_irq_wait { */ #define I915_PARAM_PERF_REVISION 54 +/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of + * timeline syncobj through drm_i915_gem_execbuffer_ext_timeline_fences. See + * I915_EXEC_USE_EXTENSIONS. + */ +#define I915_PARAM_HAS_EXEC_TIMELINE_FENCES 55 + /* Must be kept compact -- no holes and well documented */ typedef struct drm_i915_getparam { @@ -1046,6 +1052,38 @@ struct drm_i915_gem_exec_fence { __u32 flags; }; +/** + * See drm_i915_gem_execbuffer_ext_timeline_fences. + */ +#define DRM_I915_GEM_EXECBUFFER_EXT_TIMELINE_FENCES 0 + +/** + * This structure describes an array of drm_syncobj and associated points for + * timeline variants of drm_syncobj. It is invalid to append this structure to + * the execbuf if I915_EXEC_FENCE_ARRAY is set. + */ +struct drm_i915_gem_execbuffer_ext_timeline_fences { + struct i915_user_extension base; + + /** + * Number of element in the handles_ptr & value_ptr arrays. + */ + __u64 fence_count; + + /** + * Pointer to an array of struct drm_i915_gem_exec_fence of length + * fence_count. + */ + __u64 handles_ptr; + + /** + * Pointer to an array of u64 values of length fence_count. Values + * must be 0 for a binary drm_syncobj. A Value of 0 for a timeline + * drm_syncobj is invalid as it turns a drm_syncobj into a binary one. + */ + __u64 values_ptr; +}; + struct drm_i915_gem_execbuffer2 { /** * List of gem_exec_object2 structs @@ -1062,8 +1100,14 @@ struct drm_i915_gem_execbuffer2 { __u32 num_cliprects; /** * This is a struct drm_clip_rect *cliprects if I915_EXEC_FENCE_ARRAY - * is not set. If I915_EXEC_FENCE_ARRAY is set, then this is a - * struct drm_i915_gem_exec_fence *fences. + * & I915_EXEC_USE_EXTENSIONS are not set. + * + * If I915_EXEC_FENCE_ARRAY is set, then this is a pointer to an array + * of struct drm_i915_gem_exec_fence and num_cliprects is the length + * of the array. + * + * If I915_EXEC_USE_EXTENSIONS is set, then this is a pointer to a + * single struct i915_user_extension and num_cliprects is 0. */ __u64 cliprects_ptr; #define I915_EXEC_RING_MASK (0x3f) @@ -1181,7 +1225,16 @@ struct drm_i915_gem_execbuffer2 { */ #define I915_EXEC_FENCE_SUBMIT (1 << 20) -#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_SUBMIT << 1)) +/* + * Setting I915_EXEC_USE_EXTENSIONS implies that + * drm_i915_gem_execbuffer2.cliprects_ptr is treated as a pointer to an linked + * list of i915_user_extension. Each i915_user_extension node is the base of a + * larger structure. The list of supported structures are listed in the + * drm_i915_gem_execbuffer_ext enum. + */ +#define I915_EXEC_USE_EXTENSIONS (1 << 21) + +#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_USE_EXTENSIONS << 1)) #define I915_EXEC_CONTEXT_ID_MASK (0xffffffff) #define i915_execbuffer2_set_context_id(eb2, context) \ diff --git a/include/uapi/linux/blkzoned.h b/include/uapi/linux/blkzoned.h index 42c3366cc25f..656a326821a2 100644 --- a/include/uapi/linux/blkzoned.h +++ b/include/uapi/linux/blkzoned.h @@ -93,12 +93,15 @@ enum blk_zone_report_flags { * @non_seq: Flag indicating that the zone is using non-sequential resources * (for host-aware zoned block devices only). * @reset: Flag indicating that a zone reset is recommended. - * @reserved: Padding to 64 B to match the ZBC/ZAC defined zone descriptor size. + * @resv: Padding for 8B alignment. + * @capacity: Zone usable capacity in 512 B sector units + * @reserved: Padding to 64 B to match the ZBC, ZAC and ZNS defined zone + * descriptor size. * - * start, len and wp use the regular 512 B sector unit, regardless of the - * device logical block size. The overall structure size is 64 B to match the - * ZBC/ZAC defined zone descriptor and allow support for future additional - * zone information. + * start, len, capacity and wp use the regular 512 B sector unit, regardless + * of the device logical block size. The overall structure size is 64 B to + * match the ZBC, ZAC and ZNS defined zone descriptor and allow support for + * future additional zone information. */ struct blk_zone { __u64 start; /* Zone start sector */ @@ -118,7 +121,7 @@ struct blk_zone { * * @sector: starting sector of report * @nr_zones: IN maximum / OUT actual - * @reserved: padding to 16 byte alignment + * @flags: one or more flags as defined by enum blk_zone_report_flags. * @zones: Space to hold @nr_zones @zones entries on reply. * * The array of at most @nr_zones must follow this structure in memory. diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index b6238b2209b7..bf5a99d803e4 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -124,6 +124,7 @@ enum bpf_cmd { BPF_ENABLE_STATS, BPF_ITER_CREATE, BPF_LINK_DETACH, + BPF_PROG_BIND_MAP, }; enum bpf_map_type { @@ -155,6 +156,7 @@ enum bpf_map_type { BPF_MAP_TYPE_DEVMAP_HASH, BPF_MAP_TYPE_STRUCT_OPS, BPF_MAP_TYPE_RINGBUF, + BPF_MAP_TYPE_INODE_STORAGE, }; /* Note that tracing related programs such as @@ -345,19 +347,45 @@ enum bpf_link_type { /* The verifier internal test flag. Behavior is undefined */ #define BPF_F_TEST_STATE_FREQ (1U << 3) +/* If BPF_F_SLEEPABLE is used in BPF_PROG_LOAD command, the verifier will + * restrict map and helper usage for such programs. Sleepable BPF programs can + * only be attached to hooks where kernel execution context allows sleeping. + * Such programs are allowed to use helpers that may sleep like + * bpf_copy_from_user(). + */ +#define BPF_F_SLEEPABLE (1U << 4) + /* When BPF ldimm64's insn[0].src_reg != 0 then this can have - * two extensions: - * - * insn[0].src_reg: BPF_PSEUDO_MAP_FD BPF_PSEUDO_MAP_VALUE - * insn[0].imm: map fd map fd - * insn[1].imm: 0 offset into value - * insn[0].off: 0 0 - * insn[1].off: 0 0 - * ldimm64 rewrite: address of map address of map[0]+offset - * verifier type: CONST_PTR_TO_MAP PTR_TO_MAP_VALUE + * the following extensions: + * + * insn[0].src_reg: BPF_PSEUDO_MAP_FD + * insn[0].imm: map fd + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of map + * verifier type: CONST_PTR_TO_MAP */ #define BPF_PSEUDO_MAP_FD 1 +/* insn[0].src_reg: BPF_PSEUDO_MAP_VALUE + * insn[0].imm: map fd + * insn[1].imm: offset into value + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of map[0]+offset + * verifier type: PTR_TO_MAP_VALUE + */ #define BPF_PSEUDO_MAP_VALUE 2 +/* insn[0].src_reg: BPF_PSEUDO_BTF_ID + * insn[0].imm: kernel btd id of VAR + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of the kernel variable + * verifier type: PTR_TO_BTF_ID or PTR_TO_MEM, depending on whether the var + * is struct/union. + */ +#define BPF_PSEUDO_BTF_ID 3 /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative * offset to another bpf function @@ -404,6 +432,12 @@ enum { /* Enable memory-mapping BPF map */ BPF_F_MMAPABLE = (1U << 10), + +/* Share perf_event among processes */ + BPF_F_PRESERVE_ELEMS = (1U << 11), + +/* Create a map that is suitable to be an inner map with dynamic max entries */ + BPF_F_INNER_MAP = (1U << 12), }; /* Flags for BPF_PROG_QUERY. */ @@ -414,6 +448,11 @@ enum { */ #define BPF_F_QUERY_EFFECTIVE (1U << 0) +/* Flags for BPF_PROG_TEST_RUN */ + +/* If set, run the test on the cpu specified by bpf_attr.test.cpu */ +#define BPF_F_TEST_RUN_ON_CPU (1U << 0) + /* type for BPF_ENABLE_STATS */ enum bpf_stats_type { /* enabled run_time_ns and run_cnt */ @@ -556,6 +595,8 @@ union bpf_attr { */ __aligned_u64 ctx_in; __aligned_u64 ctx_out; + __u32 flags; + __u32 cpu; } test; struct { /* anonymous struct used by BPF_*_GET_*_ID */ @@ -622,8 +663,13 @@ union bpf_attr { }; __u32 attach_type; /* attach type */ __u32 flags; /* extra flags */ - __aligned_u64 iter_info; /* extra bpf_iter_link_info */ - __u32 iter_info_len; /* iter_info length */ + union { + __u32 target_btf_id; /* btf_id of target to attach to */ + struct { + __aligned_u64 iter_info; /* extra bpf_iter_link_info */ + __u32 iter_info_len; /* iter_info length */ + }; + }; } link_create; struct { /* struct used by BPF_LINK_UPDATE command */ @@ -649,6 +695,12 @@ union bpf_attr { __u32 flags; } iter_create; + struct { /* struct used by BPF_PROG_BIND_MAP command */ + __u32 prog_fd; + __u32 map_fd; + __u32 flags; /* extra flags */ + } prog_bind_map; + } __attribute__((aligned(8))); /* The description below is an attempt at providing documentation to eBPF @@ -1438,8 +1490,8 @@ union bpf_attr { * Return * The return value depends on the result of the test, and can be: * - * * 0, if the *skb* task belongs to the cgroup2. - * * 1, if the *skb* task does not belong to the cgroup2. + * * 0, if current task belongs to the cgroup2. + * * 1, if current task does not belong to the cgroup2. * * A negative error code, if an error occurred. * * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags) @@ -1649,7 +1701,7 @@ union bpf_attr { * **TCP_CONGESTION**, **TCP_BPF_IW**, * **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**, * **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**, - * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**. + * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**. * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**. * Return @@ -2204,7 +2256,7 @@ union bpf_attr { * Description * This helper is used in programs implementing policies at the * skb socket level. If the sk_buff *skb* is allowed to pass (i.e. - * if the verdeict eBPF program returns **SK_PASS**), redirect it + * if the verdict eBPF program returns **SK_PASS**), redirect it * to the socket referenced by *map* (of type * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and * egress interfaces can be used for redirection. The @@ -2496,7 +2548,7 @@ union bpf_attr { * result is from *reuse*\ **->socks**\ [] using the hash of the * tuple. * - * long bpf_sk_release(struct bpf_sock *sock) + * long bpf_sk_release(void *sock) * Description * Release the reference held by *sock*. *sock* must be a * non-**NULL** pointer that was returned from @@ -2676,7 +2728,7 @@ union bpf_attr { * result is from *reuse*\ **->socks**\ [] using the hash of the * tuple. * - * long bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) * Description * Check whether *iph* and *th* contain a valid SYN cookie ACK for * the listening socket in *sk*. @@ -2807,7 +2859,7 @@ union bpf_attr { * * **-ERANGE** if resulting value was out of range. * - * void *bpf_sk_storage_get(struct bpf_map *map, struct bpf_sock *sk, void *value, u64 flags) + * void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags) * Description * Get a bpf-local-storage from a *sk*. * @@ -2823,6 +2875,9 @@ union bpf_attr { * "type". The bpf-local-storage "type" (i.e. the *map*) is * searched against all bpf-local-storages residing at *sk*. * + * *sk* is a kernel **struct sock** pointer for LSM program. + * *sk* is a **struct bpf_sock** pointer for other program types. + * * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be * used such that a new bpf-local-storage will be * created if one does not exist. *value* can be used @@ -2835,13 +2890,14 @@ union bpf_attr { * **NULL** if not found or there was an error in adding * a new bpf-local-storage. * - * long bpf_sk_storage_delete(struct bpf_map *map, struct bpf_sock *sk) + * long bpf_sk_storage_delete(struct bpf_map *map, void *sk) * Description * Delete a bpf-local-storage from a *sk*. * Return * 0 on success. * * **-ENOENT** if the bpf-local-storage cannot be found. + * **-EINVAL** if sk is not a fullsock (e.g. a request_sock). * * long bpf_send_signal(u32 sig) * Description @@ -2858,7 +2914,7 @@ union bpf_attr { * * **-EAGAIN** if bpf program can try again. * - * s64 bpf_tcp_gen_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) * Description * Try to issue a SYN cookie for the packet with corresponding * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*. @@ -3087,7 +3143,7 @@ union bpf_attr { * Return * The id is returned or 0 in case the id could not be retrieved. * - * long bpf_sk_assign(struct sk_buff *skb, struct bpf_sock *sk, u64 flags) + * long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags) * Description * Helper is overloaded depending on BPF program type. This * description applies to **BPF_PROG_TYPE_SCHED_CLS** and @@ -3215,11 +3271,11 @@ union bpf_attr { * * **-EOVERFLOW** if an overflow happened: The same object will be tried again. * - * u64 bpf_sk_cgroup_id(struct bpf_sock *sk) + * u64 bpf_sk_cgroup_id(void *sk) * Description * Return the cgroup v2 id of the socket *sk*. * - * *sk* must be a non-**NULL** pointer to a full socket, e.g. one + * *sk* must be a non-**NULL** pointer to a socket, e.g. one * returned from **bpf_sk_lookup_xxx**\ (), * **bpf_sk_fullsock**\ (), etc. The format of returned id is * same as in **bpf_skb_cgroup_id**\ (). @@ -3229,7 +3285,7 @@ union bpf_attr { * Return * The id is returned or 0 in case the id could not be retrieved. * - * u64 bpf_sk_ancestor_cgroup_id(struct bpf_sock *sk, int ancestor_level) + * u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level) * Description * Return id of cgroup v2 that is ancestor of cgroup associated * with the *sk* at the *ancestor_level*. The root cgroup is at @@ -3337,38 +3393,38 @@ union bpf_attr { * Description * Dynamically cast a *sk* pointer to a *tcp6_sock* pointer. * Return - * *sk* if casting is valid, or NULL otherwise. + * *sk* if casting is valid, or **NULL** otherwise. * * struct tcp_sock *bpf_skc_to_tcp_sock(void *sk) * Description * Dynamically cast a *sk* pointer to a *tcp_sock* pointer. * Return - * *sk* if casting is valid, or NULL otherwise. + * *sk* if casting is valid, or **NULL** otherwise. * * struct tcp_timewait_sock *bpf_skc_to_tcp_timewait_sock(void *sk) * Description * Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer. * Return - * *sk* if casting is valid, or NULL otherwise. + * *sk* if casting is valid, or **NULL** otherwise. * * struct tcp_request_sock *bpf_skc_to_tcp_request_sock(void *sk) * Description * Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer. * Return - * *sk* if casting is valid, or NULL otherwise. + * *sk* if casting is valid, or **NULL** otherwise. * * struct udp6_sock *bpf_skc_to_udp6_sock(void *sk) * Description * Dynamically cast a *sk* pointer to a *udp6_sock* pointer. * Return - * *sk* if casting is valid, or NULL otherwise. + * *sk* if casting is valid, or **NULL** otherwise. * * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags) * Description * Return a user or a kernel stack in bpf program provided buffer. * To achieve this, the helper needs *task*, which is a valid - * pointer to struct task_struct. To store the stacktrace, the - * bpf program provides *buf* with a nonnegative *size*. + * pointer to **struct task_struct**. To store the stacktrace, the + * bpf program provides *buf* with a nonnegative *size*. * * The last argument, *flags*, holds the number of stack frames to * skip (from 0 to 255), masked with @@ -3395,6 +3451,293 @@ union bpf_attr { * A non-negative value equal to or less than *size* on success, * or a negative error in case of failure. * + * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags) + * Description + * Load header option. Support reading a particular TCP header + * option for bpf program (**BPF_PROG_TYPE_SOCK_OPS**). + * + * If *flags* is 0, it will search the option from the + * *skops*\ **->skb_data**. The comment in **struct bpf_sock_ops** + * has details on what skb_data contains under different + * *skops*\ **->op**. + * + * The first byte of the *searchby_res* specifies the + * kind that it wants to search. + * + * If the searching kind is an experimental kind + * (i.e. 253 or 254 according to RFC6994). It also + * needs to specify the "magic" which is either + * 2 bytes or 4 bytes. It then also needs to + * specify the size of the magic by using + * the 2nd byte which is "kind-length" of a TCP + * header option and the "kind-length" also + * includes the first 2 bytes "kind" and "kind-length" + * itself as a normal TCP header option also does. + * + * For example, to search experimental kind 254 with + * 2 byte magic 0xeB9F, the searchby_res should be + * [ 254, 4, 0xeB, 0x9F, 0, 0, .... 0 ]. + * + * To search for the standard window scale option (3), + * the *searchby_res* should be [ 3, 0, 0, .... 0 ]. + * Note, kind-length must be 0 for regular option. + * + * Searching for No-Op (0) and End-of-Option-List (1) are + * not supported. + * + * *len* must be at least 2 bytes which is the minimal size + * of a header option. + * + * Supported flags: + * + * * **BPF_LOAD_HDR_OPT_TCP_SYN** to search from the + * saved_syn packet or the just-received syn packet. + * + * Return + * > 0 when found, the header option is copied to *searchby_res*. + * The return value is the total length copied. On failure, a + * negative error code is returned: + * + * **-EINVAL** if a parameter is invalid. + * + * **-ENOMSG** if the option is not found. + * + * **-ENOENT** if no syn packet is available when + * **BPF_LOAD_HDR_OPT_TCP_SYN** is used. + * + * **-ENOSPC** if there is not enough space. Only *len* number of + * bytes are copied. + * + * **-EFAULT** on failure to parse the header options in the + * packet. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * long bpf_store_hdr_opt(struct bpf_sock_ops *skops, const void *from, u32 len, u64 flags) + * Description + * Store header option. The data will be copied + * from buffer *from* with length *len* to the TCP header. + * + * The buffer *from* should have the whole option that + * includes the kind, kind-length, and the actual + * option data. The *len* must be at least kind-length + * long. The kind-length does not have to be 4 byte + * aligned. The kernel will take care of the padding + * and setting the 4 bytes aligned value to th->doff. + * + * This helper will check for duplicated option + * by searching the same option in the outgoing skb. + * + * This helper can only be called during + * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * + * Return + * 0 on success, or negative error in case of failure: + * + * **-EINVAL** If param is invalid. + * + * **-ENOSPC** if there is not enough space in the header. + * Nothing has been written + * + * **-EEXIST** if the option already exists. + * + * **-EFAULT** on failrue to parse the existing header options. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags) + * Description + * Reserve *len* bytes for the bpf header option. The + * space will be used by **bpf_store_hdr_opt**\ () later in + * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * + * If **bpf_reserve_hdr_opt**\ () is called multiple times, + * the total number of bytes will be reserved. + * + * This helper can only be called during + * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**. + * + * Return + * 0 on success, or negative error in case of failure: + * + * **-EINVAL** if a parameter is invalid. + * + * **-ENOSPC** if there is not enough space in the header. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags) + * Description + * Get a bpf_local_storage from an *inode*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *inode* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this + * helper enforces the key must be an inode and the map must also + * be a **BPF_MAP_TYPE_INODE_STORAGE**. + * + * Underneath, the value is stored locally at *inode* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf_local_storage residing at *inode*. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * int bpf_inode_storage_delete(struct bpf_map *map, void *inode) + * Description + * Delete a bpf_local_storage from an *inode*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + * + * long bpf_d_path(struct path *path, char *buf, u32 sz) + * Description + * Return full path for given **struct path** object, which + * needs to be the kernel BTF *path* object. The path is + * returned in the provided buffer *buf* of size *sz* and + * is zero terminated. + * + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr) + * Description + * Read *size* bytes from user space address *user_ptr* and store + * the data in *dst*. This is a wrapper of **copy_from_user**\ (). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags) + * Description + * Use BTF to store a string representation of *ptr*->ptr in *str*, + * using *ptr*->type_id. This value should specify the type + * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1) + * can be used to look up vmlinux BTF type ids. Traversing the + * data structure using BTF, the type information and values are + * stored in the first *str_size* - 1 bytes of *str*. Safe copy of + * the pointer data is carried out to avoid kernel crashes during + * operation. Smaller types can use string space on the stack; + * larger programs can use map data to store the string + * representation. + * + * The string can be subsequently shared with userspace via + * bpf_perf_event_output() or ring buffer interfaces. + * bpf_trace_printk() is to be avoided as it places too small + * a limit on string size to be useful. + * + * *flags* is a combination of + * + * **BTF_F_COMPACT** + * no formatting around type information + * **BTF_F_NONAME** + * no struct/union member names/types + * **BTF_F_PTR_RAW** + * show raw (unobfuscated) pointer values; + * equivalent to printk specifier %px. + * **BTF_F_ZERO** + * show zero-valued struct/union members; they + * are not displayed by default + * + * Return + * The number of bytes that were written (or would have been + * written if output had to be truncated due to string size), + * or a negative error in cases of failure. + * + * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags) + * Description + * Use BTF to write to seq_write a string representation of + * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf(). + * *flags* are identical to those used for bpf_snprintf_btf. + * Return + * 0 on success or a negative error in case of failure. + * + * u64 bpf_skb_cgroup_classid(struct sk_buff *skb) + * Description + * See **bpf_get_cgroup_classid**\ () for the main description. + * This helper differs from **bpf_get_cgroup_classid**\ () in that + * the cgroup v1 net_cls class is retrieved only from the *skb*'s + * associated socket instead of the current process. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_redirect_neigh(u32 ifindex, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex* + * and fill in L2 addresses from neighboring subsystem. This helper + * is somewhat similar to **bpf_redirect**\ (), except that it + * populates L2 addresses as well, meaning, internally, the helper + * performs a FIB lookup based on the skb's networking header to + * get the address of the next hop and then relies on the neighbor + * lookup for the L2 address of the nexthop. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types, and enabled + * for IPv4 and IPv6 protocols. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. + * + * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on *cpu*. A ksym is an + * extern variable decorated with '__ksym'. For ksym, there is a + * global var (either static or global) defined of the same name + * in the kernel. The ksym is percpu if the global var is percpu. + * The returned pointer points to the global percpu var on *cpu*. + * + * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the + * kernel, except that bpf_per_cpu_ptr() may return NULL. This + * happens if *cpu* is larger than nr_cpu_ids. The caller of + * bpf_per_cpu_ptr() must check the returned value. + * Return + * A pointer pointing to the kernel percpu variable on *cpu*, or + * NULL, if *cpu* is invalid. + * + * void *bpf_this_cpu_ptr(const void *percpu_ptr) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on this cpu. See the + * description of 'ksym' in **bpf_per_cpu_ptr**\ (). + * + * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in + * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would + * never return NULL. + * Return + * A pointer pointing to the kernel percpu variable on this cpu. + * + * long bpf_redirect_peer(u32 ifindex, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex*. + * This helper is somewhat similar to **bpf_redirect**\ (), except + * that the redirection happens to the *ifindex*' peer device and + * the netns switch takes place from ingress to ingress without + * going through the CPU's backlog queue. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types at the ingress + * hook and for veth device types. The peer device must reside in a + * different network namespace. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -3539,6 +3882,20 @@ union bpf_attr { FN(skc_to_tcp_request_sock), \ FN(skc_to_udp6_sock), \ FN(get_task_stack), \ + FN(load_hdr_opt), \ + FN(store_hdr_opt), \ + FN(reserve_hdr_opt), \ + FN(inode_storage_get), \ + FN(inode_storage_delete), \ + FN(d_path), \ + FN(copy_from_user), \ + FN(snprintf_btf), \ + FN(seq_printf_btf), \ + FN(skb_cgroup_classid), \ + FN(redirect_neigh), \ + FN(bpf_per_cpu_ptr), \ + FN(bpf_this_cpu_ptr), \ + FN(redirect_peer), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper @@ -3648,9 +4005,13 @@ enum { BPF_F_SYSCTL_BASE_NAME = (1ULL << 0), }; -/* BPF_FUNC_sk_storage_get flags */ +/* BPF_FUNC_<kernel_obj>_storage_get flags */ enum { - BPF_SK_STORAGE_GET_F_CREATE = (1ULL << 0), + BPF_LOCAL_STORAGE_GET_F_CREATE = (1ULL << 0), + /* BPF_SK_STORAGE_GET_F_CREATE is only kept for backward compatibility + * and BPF_LOCAL_STORAGE_GET_F_CREATE must be used instead. + */ + BPF_SK_STORAGE_GET_F_CREATE = BPF_LOCAL_STORAGE_GET_F_CREATE, }; /* BPF_FUNC_read_branch_records flags. */ @@ -4071,6 +4432,15 @@ struct bpf_link_info { __u64 cgroup_id; __u32 attach_type; } cgroup; + struct { + __aligned_u64 target_name; /* in/out: target_name buffer ptr */ + __u32 target_name_len; /* in/out: target_name buffer len */ + union { + struct { + __u32 map_id; + } map; + }; + } iter; struct { __u32 netns_ino; __u32 attach_type; @@ -4158,6 +4528,36 @@ struct bpf_sock_ops { __u64 bytes_received; __u64 bytes_acked; __bpf_md_ptr(struct bpf_sock *, sk); + /* [skb_data, skb_data_end) covers the whole TCP header. + * + * BPF_SOCK_OPS_PARSE_HDR_OPT_CB: The packet received + * BPF_SOCK_OPS_HDR_OPT_LEN_CB: Not useful because the + * header has not been written. + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB: The header and options have + * been written so far. + * BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB: The SYNACK that concludes + * the 3WHS. + * BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB: The ACK that concludes + * the 3WHS. + * + * bpf_load_hdr_opt() can also be used to read a particular option. + */ + __bpf_md_ptr(void *, skb_data); + __bpf_md_ptr(void *, skb_data_end); + __u32 skb_len; /* The total length of a packet. + * It includes the header, options, + * and payload. + */ + __u32 skb_tcp_flags; /* tcp_flags of the header. It provides + * an easy way to check for tcp_flags + * without parsing skb_data. + * + * In particular, the skb_tcp_flags + * will still be available in + * BPF_SOCK_OPS_HDR_OPT_LEN even though + * the outgoing header has not + * been written yet. + */ }; /* Definitions for bpf_sock_ops_cb_flags */ @@ -4166,8 +4566,51 @@ enum { BPF_SOCK_OPS_RETRANS_CB_FLAG = (1<<1), BPF_SOCK_OPS_STATE_CB_FLAG = (1<<2), BPF_SOCK_OPS_RTT_CB_FLAG = (1<<3), + /* Call bpf for all received TCP headers. The bpf prog will be + * called under sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * + * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * for the header option related helpers that will be useful + * to the bpf programs. + * + * It could be used at the client/active side (i.e. connect() side) + * when the server told it that the server was in syncookie + * mode and required the active side to resend the bpf-written + * options. The active side can keep writing the bpf-options until + * it received a valid packet from the server side to confirm + * the earlier packet (and options) has been received. The later + * example patch is using it like this at the active side when the + * server is in syncookie mode. + * + * The bpf prog will usually turn this off in the common cases. + */ + BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG = (1<<4), + /* Call bpf when kernel has received a header option that + * the kernel cannot handle. The bpf prog will be called under + * sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB. + * + * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * for the header option related helpers that will be useful + * to the bpf programs. + */ + BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG = (1<<5), + /* Call bpf when the kernel is writing header options for the + * outgoing packet. The bpf prog will first be called + * to reserve space in a skb under + * sock_ops->op == BPF_SOCK_OPS_HDR_OPT_LEN_CB. Then + * the bpf prog will be called to write the header option(s) + * under sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + * + * Please refer to the comment in BPF_SOCK_OPS_HDR_OPT_LEN_CB + * and BPF_SOCK_OPS_WRITE_HDR_OPT_CB for the header option + * related helpers that will be useful to the bpf programs. + * + * The kernel gets its chance to reserve space and write + * options first before the BPF program does. + */ + BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG = (1<<6), /* Mask of all currently supported cb flags */ - BPF_SOCK_OPS_ALL_CB_FLAGS = 0xF, + BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F, }; /* List of known BPF sock_ops operators. @@ -4223,6 +4666,63 @@ enum { */ BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. */ + BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option. + * It will be called to handle + * the packets received at + * an already established + * connection. + * + * sock_ops->skb_data: + * Referring to the received skb. + * It covers the TCP header only. + * + * bpf_load_hdr_opt() can also + * be used to search for a + * particular option. + */ + BPF_SOCK_OPS_HDR_OPT_LEN_CB, /* Reserve space for writing the + * header option later in + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + * Arg1: bool want_cookie. (in + * writing SYNACK only) + * + * sock_ops->skb_data: + * Not available because no header has + * been written yet. + * + * sock_ops->skb_tcp_flags: + * The tcp_flags of the + * outgoing skb. (e.g. SYN, ACK, FIN). + * + * bpf_reserve_hdr_opt() should + * be used to reserve space. + */ + BPF_SOCK_OPS_WRITE_HDR_OPT_CB, /* Write the header options + * Arg1: bool want_cookie. (in + * writing SYNACK only) + * + * sock_ops->skb_data: + * Referring to the outgoing skb. + * It covers the TCP header + * that has already been written + * by the kernel and the + * earlier bpf-progs. + * + * sock_ops->skb_tcp_flags: + * The tcp_flags of the outgoing + * skb. (e.g. SYN, ACK, FIN). + * + * bpf_store_hdr_opt() should + * be used to write the + * option. + * + * bpf_load_hdr_opt() can also + * be used to search for a + * particular option that + * has already been written + * by the kernel or the + * earlier bpf-progs. + */ }; /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect @@ -4250,6 +4750,63 @@ enum { enum { TCP_BPF_IW = 1001, /* Set TCP initial congestion window */ TCP_BPF_SNDCWND_CLAMP = 1002, /* Set sndcwnd_clamp */ + TCP_BPF_DELACK_MAX = 1003, /* Max delay ack in usecs */ + TCP_BPF_RTO_MIN = 1004, /* Min delay ack in usecs */ + /* Copy the SYN pkt to optval + * + * BPF_PROG_TYPE_SOCK_OPS only. It is similar to the + * bpf_getsockopt(TCP_SAVED_SYN) but it does not limit + * to only getting from the saved_syn. It can either get the + * syn packet from: + * + * 1. the just-received SYN packet (only available when writing the + * SYNACK). It will be useful when it is not necessary to + * save the SYN packet for latter use. It is also the only way + * to get the SYN during syncookie mode because the syn + * packet cannot be saved during syncookie. + * + * OR + * + * 2. the earlier saved syn which was done by + * bpf_setsockopt(TCP_SAVE_SYN). + * + * The bpf_getsockopt(TCP_BPF_SYN*) option will hide where the + * SYN packet is obtained. + * + * If the bpf-prog does not need the IP[46] header, the + * bpf-prog can avoid parsing the IP header by using + * TCP_BPF_SYN. Otherwise, the bpf-prog can get both + * IP[46] and TCP header by using TCP_BPF_SYN_IP. + * + * >0: Total number of bytes copied + * -ENOSPC: Not enough space in optval. Only optlen number of + * bytes is copied. + * -ENOENT: The SYN skb is not available now and the earlier SYN pkt + * is not saved by setsockopt(TCP_SAVE_SYN). + */ + TCP_BPF_SYN = 1005, /* Copy the TCP header */ + TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */ + TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */ +}; + +enum { + BPF_LOAD_HDR_OPT_TCP_SYN = (1ULL << 0), +}; + +/* args[0] value during BPF_SOCK_OPS_HDR_OPT_LEN_CB and + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + */ +enum { + BPF_WRITE_HDR_TCP_CURRENT_MSS = 1, /* Kernel is finding the + * total option spaces + * required for an established + * sk in order to calculate the + * MSS. No skb is actually + * sent. + */ + BPF_WRITE_HDR_TCP_SYNACK_COOKIE = 2, /* Kernel is in syncookie mode + * when sending a SYN. + */ }; struct bpf_perf_event_value { @@ -4447,4 +5004,34 @@ struct bpf_sk_lookup { __u32 local_port; /* Host byte order */ }; +/* + * struct btf_ptr is used for typed pointer representation; the + * type id is used to render the pointer data as the appropriate type + * via the bpf_snprintf_btf() helper described above. A flags field - + * potentially to specify additional details about the BTF pointer + * (rather than its mode of display) - is included for future use. + * Display flags - BTF_F_* - are passed to bpf_snprintf_btf separately. + */ +struct btf_ptr { + void *ptr; + __u32 type_id; + __u32 flags; /* BTF ptr flags; unused at present. */ +}; + +/* + * Flags to control bpf_snprintf_btf() behaviour. + * - BTF_F_COMPACT: no formatting around type information + * - BTF_F_NONAME: no struct/union member names/types + * - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; + * equivalent to %px. + * - BTF_F_ZERO: show zero-valued struct/union members; they + * are not displayed by default + */ +enum { + BTF_F_COMPACT = (1ULL << 0), + BTF_F_NONAME = (1ULL << 1), + BTF_F_PTR_RAW = (1ULL << 2), + BTF_F_ZERO = (1ULL << 3), +}; + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h index 9ba64ca6b4ac..6b885982ece6 100644 --- a/include/uapi/linux/btrfs_tree.h +++ b/include/uapi/linux/btrfs_tree.h @@ -4,6 +4,11 @@ #include <linux/btrfs.h> #include <linux/types.h> +#ifdef __KERNEL__ +#include <linux/stddef.h> +#else +#include <stddef.h> +#endif /* * This header contains the structure definitions and constants used @@ -645,6 +650,15 @@ struct btrfs_root_item { } __attribute__ ((__packed__)); /* + * Btrfs root item used to be smaller than current size. The old format ends + * at where member generation_v2 is. + */ +static inline __u32 btrfs_legacy_root_item_size(void) +{ + return offsetof(struct btrfs_root_item, generation_v2); +} + +/* * this is used for both forward and backward root refs */ struct btrfs_root_ref { diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h new file mode 100644 index 000000000000..7793b26aa154 --- /dev/null +++ b/include/uapi/linux/can/isotp.h @@ -0,0 +1,165 @@ +/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * linux/can/isotp.h + * + * Definitions for isotp CAN sockets (ISO 15765-2:2016) + * + * Copyright (c) 2020 Volkswagen Group Electronic Research + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + */ + +#ifndef _UAPI_CAN_ISOTP_H +#define _UAPI_CAN_ISOTP_H + +#include <linux/types.h> +#include <linux/can.h> + +#define SOL_CAN_ISOTP (SOL_CAN_BASE + CAN_ISOTP) + +/* for socket options affecting the socket (not the global system) */ + +#define CAN_ISOTP_OPTS 1 /* pass struct can_isotp_options */ + +#define CAN_ISOTP_RECV_FC 2 /* pass struct can_isotp_fc_options */ + +/* sockopts to force stmin timer values for protocol regression tests */ + +#define CAN_ISOTP_TX_STMIN 3 /* pass __u32 value in nano secs */ + /* use this time instead of value */ + /* provided in FC from the receiver */ + +#define CAN_ISOTP_RX_STMIN 4 /* pass __u32 value in nano secs */ + /* ignore received CF frames which */ + /* timestamps differ less than val */ + +#define CAN_ISOTP_LL_OPTS 5 /* pass struct can_isotp_ll_options */ + +struct can_isotp_options { + + __u32 flags; /* set flags for isotp behaviour. */ + /* __u32 value : flags see below */ + + __u32 frame_txtime; /* frame transmission time (N_As/N_Ar) */ + /* __u32 value : time in nano secs */ + + __u8 ext_address; /* set address for extended addressing */ + /* __u8 value : extended address */ + + __u8 txpad_content; /* set content of padding byte (tx) */ + /* __u8 value : content on tx path */ + + __u8 rxpad_content; /* set content of padding byte (rx) */ + /* __u8 value : content on rx path */ + + __u8 rx_ext_address; /* set address for extended addressing */ + /* __u8 value : extended address (rx) */ +}; + +struct can_isotp_fc_options { + + __u8 bs; /* blocksize provided in FC frame */ + /* __u8 value : blocksize. 0 = off */ + + __u8 stmin; /* separation time provided in FC frame */ + /* __u8 value : */ + /* 0x00 - 0x7F : 0 - 127 ms */ + /* 0x80 - 0xF0 : reserved */ + /* 0xF1 - 0xF9 : 100 us - 900 us */ + /* 0xFA - 0xFF : reserved */ + + __u8 wftmax; /* max. number of wait frame transmiss. */ + /* __u8 value : 0 = omit FC N_PDU WT */ +}; + +struct can_isotp_ll_options { + + __u8 mtu; /* generated & accepted CAN frame type */ + /* __u8 value : */ + /* CAN_MTU (16) -> standard CAN 2.0 */ + /* CANFD_MTU (72) -> CAN FD frame */ + + __u8 tx_dl; /* tx link layer data length in bytes */ + /* (configured maximum payload length) */ + /* __u8 value : 8,12,16,20,24,32,48,64 */ + /* => rx path supports all LL_DL values */ + + __u8 tx_flags; /* set into struct canfd_frame.flags */ + /* at frame creation: e.g. CANFD_BRS */ + /* Obsolete when the BRS flag is fixed */ + /* by the CAN netdriver configuration */ +}; + +/* flags for isotp behaviour */ + +#define CAN_ISOTP_LISTEN_MODE 0x001 /* listen only (do not send FC) */ +#define CAN_ISOTP_EXTEND_ADDR 0x002 /* enable extended addressing */ +#define CAN_ISOTP_TX_PADDING 0x004 /* enable CAN frame padding tx path */ +#define CAN_ISOTP_RX_PADDING 0x008 /* enable CAN frame padding rx path */ +#define CAN_ISOTP_CHK_PAD_LEN 0x010 /* check received CAN frame padding */ +#define CAN_ISOTP_CHK_PAD_DATA 0x020 /* check received CAN frame padding */ +#define CAN_ISOTP_HALF_DUPLEX 0x040 /* half duplex error state handling */ +#define CAN_ISOTP_FORCE_TXSTMIN 0x080 /* ignore stmin from received FC */ +#define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */ +#define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */ +#define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */ + + +/* default values */ + +#define CAN_ISOTP_DEFAULT_FLAGS 0 +#define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00 +#define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */ +#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0 +#define CAN_ISOTP_DEFAULT_RECV_BS 0 +#define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00 +#define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0 + +#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU +#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN +#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 + +/* + * Remark on CAN_ISOTP_DEFAULT_RECV_* values: + * + * We can strongly assume, that the Linux Kernel implementation of + * CAN_ISOTP is capable to run with BS=0, STmin=0 and WFTmax=0. + * But as we like to be able to behave as a commonly available ECU, + * these default settings can be changed via sockopts. + * For that reason the STmin value is intentionally _not_ checked for + * consistency and copied directly into the flow control (FC) frame. + */ + +#endif /* !_UAPI_CAN_ISOTP_H */ diff --git a/include/uapi/linux/can/raw.h b/include/uapi/linux/can/raw.h index 6a11d308eb5c..3386aa81fdf2 100644 --- a/include/uapi/linux/can/raw.h +++ b/include/uapi/linux/can/raw.h @@ -49,6 +49,9 @@ #include <linux/can.h> #define SOL_CAN_RAW (SOL_CAN_BASE + CAN_RAW) +enum { + SCM_CAN_RAW_ERRQUEUE = 1, +}; /* for socket options affecting the socket (not the global system) */ diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h index 395dd0df8d08..c6ca33034147 100644 --- a/include/uapi/linux/capability.h +++ b/include/uapi/linux/capability.h @@ -288,6 +288,8 @@ struct vfs_ns_cap_data { processes and setting the scheduling algorithm used by another process. */ /* Allow setting cpu affinity on other processes */ +/* Allow setting realtime ioprio class */ +/* Allow setting ioprio class on other processes */ #define CAP_SYS_NICE 23 diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h index 2817230148fd..6c34f6e2f1f7 100644 --- a/include/uapi/linux/cdrom.h +++ b/include/uapi/linux/cdrom.h @@ -289,7 +289,10 @@ struct cdrom_generic_command unsigned char data_direction; int quiet; int timeout; - void __user *reserved[1]; /* unused, actually */ + union { + void __user *reserved[1]; /* unused, actually */ + void __user *unused; + }; }; /* diff --git a/include/uapi/linux/coresight-stm.h b/include/uapi/linux/coresight-stm.h index 8847dbf24151..7ff3709c01b8 100644 --- a/include/uapi/linux/coresight-stm.h +++ b/include/uapi/linux/coresight-stm.h @@ -5,6 +5,7 @@ #include <linux/const.h> #define STM_FLAG_TIMESTAMPED _BITUL(3) +#define STM_FLAG_MARKED _BITUL(4) #define STM_FLAG_GUARANTEED _BITUL(7) /* diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index cfef4245ea5a..0113bc4db9f5 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -13,6 +13,8 @@ #ifndef _UAPI_LINUX_DEVLINK_H_ #define _UAPI_LINUX_DEVLINK_H_ +#include <linux/const.h> + #define DEVLINK_GENL_NAME "devlink" #define DEVLINK_GENL_VERSION 0x1 #define DEVLINK_GENL_MCGRP_CONFIG_NAME "config" @@ -122,6 +124,8 @@ enum devlink_command { DEVLINK_CMD_TRAP_POLICER_NEW, DEVLINK_CMD_TRAP_POLICER_DEL, + DEVLINK_CMD_HEALTH_REPORTER_TEST, + /* add new commands above here */ __DEVLINK_CMD_MAX, DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1 @@ -193,6 +197,9 @@ enum devlink_port_flavour { * port that faces the PCI VF. */ DEVLINK_PORT_FLAVOUR_VIRTUAL, /* Any virtual port facing the user. */ + DEVLINK_PORT_FLAVOUR_UNUSED, /* Port which exists in the switch, but + * is not used in any way. + */ }; enum devlink_param_cmode { @@ -228,6 +235,28 @@ enum { DEVLINK_ATTR_STATS_MAX = __DEVLINK_ATTR_STATS_MAX - 1 }; +/* Specify what sections of a flash component can be overwritten when + * performing an update. Overwriting of firmware binary sections is always + * implicitly assumed to be allowed. + * + * Each section must be documented in + * Documentation/networking/devlink/devlink-flash.rst + * + */ +enum { + DEVLINK_FLASH_OVERWRITE_SETTINGS_BIT, + DEVLINK_FLASH_OVERWRITE_IDENTIFIERS_BIT, + + __DEVLINK_FLASH_OVERWRITE_MAX_BIT, + DEVLINK_FLASH_OVERWRITE_MAX_BIT = __DEVLINK_FLASH_OVERWRITE_MAX_BIT - 1 +}; + +#define DEVLINK_FLASH_OVERWRITE_SETTINGS _BITUL(DEVLINK_FLASH_OVERWRITE_SETTINGS_BIT) +#define DEVLINK_FLASH_OVERWRITE_IDENTIFIERS _BITUL(DEVLINK_FLASH_OVERWRITE_IDENTIFIERS_BIT) + +#define DEVLINK_SUPPORTED_FLASH_OVERWRITE_SECTIONS \ + (_BITUL(__DEVLINK_FLASH_OVERWRITE_MAX_BIT) - 1) + /** * enum devlink_trap_action - Packet trap action. * @DEVLINK_TRAP_ACTION_DROP: Packet is dropped by the device and a copy is not @@ -272,6 +301,29 @@ enum { DEVLINK_ATTR_TRAP_METADATA_TYPE_FA_COOKIE, }; +enum devlink_reload_action { + DEVLINK_RELOAD_ACTION_UNSPEC, + DEVLINK_RELOAD_ACTION_DRIVER_REINIT, /* Driver entities re-instantiation */ + DEVLINK_RELOAD_ACTION_FW_ACTIVATE, /* FW activate */ + + /* Add new reload actions above */ + __DEVLINK_RELOAD_ACTION_MAX, + DEVLINK_RELOAD_ACTION_MAX = __DEVLINK_RELOAD_ACTION_MAX - 1 +}; + +enum devlink_reload_limit { + DEVLINK_RELOAD_LIMIT_UNSPEC, /* unspecified, no constraints */ + DEVLINK_RELOAD_LIMIT_NO_RESET, /* No reset allowed, no down time allowed, + * no link flap and no configuration is lost. + */ + + /* Add new reload limit above */ + __DEVLINK_RELOAD_LIMIT_MAX, + DEVLINK_RELOAD_LIMIT_MAX = __DEVLINK_RELOAD_LIMIT_MAX - 1 +}; + +#define DEVLINK_RELOAD_LIMITS_VALID_MASK (BIT(__DEVLINK_RELOAD_LIMIT_MAX) - 1) + enum devlink_attr { /* don't change the order or add anything between, this is ABI! */ DEVLINK_ATTR_UNSPEC, @@ -458,6 +510,23 @@ enum devlink_attr { DEVLINK_ATTR_PORT_LANES, /* u32 */ DEVLINK_ATTR_PORT_SPLITTABLE, /* u8 */ + DEVLINK_ATTR_PORT_EXTERNAL, /* u8 */ + DEVLINK_ATTR_PORT_CONTROLLER_NUMBER, /* u32 */ + + DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUT, /* u64 */ + DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK, /* bitfield32 */ + + DEVLINK_ATTR_RELOAD_ACTION, /* u8 */ + DEVLINK_ATTR_RELOAD_ACTIONS_PERFORMED, /* bitfield32 */ + DEVLINK_ATTR_RELOAD_LIMITS, /* bitfield32 */ + + DEVLINK_ATTR_DEV_STATS, /* nested */ + DEVLINK_ATTR_RELOAD_STATS, /* nested */ + DEVLINK_ATTR_RELOAD_STATS_ENTRY, /* nested */ + DEVLINK_ATTR_RELOAD_STATS_LIMIT, /* u8 */ + DEVLINK_ATTR_RELOAD_STATS_VALUE, /* u32 */ + DEVLINK_ATTR_REMOTE_RELOAD_STATS, /* nested */ + /* add new attributes above here, update the policy in devlink.c */ __DEVLINK_ATTR_MAX, diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index 6622912c2342..4933b6b67b85 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -272,9 +272,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 42 +#define DM_VERSION_MINOR 43 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2020-02-27)" +#define DM_VERSION_EXTRA "-ioctl (2020-10-01)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ diff --git a/include/uapi/linux/dqblk_xfs.h b/include/uapi/linux/dqblk_xfs.h index 03d890b80ebc..c71d909addda 100644 --- a/include/uapi/linux/dqblk_xfs.h +++ b/include/uapi/linux/dqblk_xfs.h @@ -61,12 +61,16 @@ typedef struct fs_disk_quota { __u64 d_ino_softlimit;/* preferred inode limit */ __u64 d_bcount; /* # disk blocks owned by the user */ __u64 d_icount; /* # inodes owned by the user */ - __s32 d_itimer; /* zero if within inode limits */ - /* if not, we refuse service */ + __s32 d_itimer; /* Zero if within inode limits. If + * not, we refuse service at this time + * (in seconds since Unix epoch) */ __s32 d_btimer; /* similar to above; for disk blocks */ __u16 d_iwarns; /* # warnings issued wrt num inodes */ __u16 d_bwarns; /* # warnings issued wrt disk blocks */ - __s32 d_padding2; /* padding2 - for future use */ + __s8 d_itimer_hi; /* upper 8 bits of timer values */ + __s8 d_btimer_hi; + __s8 d_rtbtimer_hi; + __s8 d_padding2; /* padding2 - for future use */ __u64 d_rtb_hardlimit;/* absolute limit on realtime blks */ __u64 d_rtb_softlimit;/* preferred limit on RT disk blks */ __u64 d_rtbcount; /* # realtime blocks owned */ @@ -122,6 +126,12 @@ typedef struct fs_disk_quota { #define FS_DQ_ACCT_MASK (FS_DQ_BCOUNT | FS_DQ_ICOUNT | FS_DQ_RTBCOUNT) /* + * Quota expiration timestamps are 40-bit signed integers, with the upper 8 + * bits encoded in the _hi fields. + */ +#define FS_DQ_BIGTIME (1<<15) + +/* * Various flags related to quotactl(2). */ #define FS_QUOTA_UDQ_ACCT (1<<0) /* user quota accounting */ diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index 22220945a5fd..30f68b42eeb5 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -425,6 +425,7 @@ typedef struct elf64_shdr { #define NT_ARM_PAC_MASK 0x406 /* ARM pointer authentication code masks */ #define NT_ARM_PACA_KEYS 0x407 /* ARM pointer authentication address keys */ #define NT_ARM_PACG_KEYS 0x408 /* ARM pointer authentication generic key */ +#define NT_ARM_TAGGED_ADDR_CTRL 0x409 /* arm64 tagged address control (prctl()) */ #define NT_ARC_V2 0x600 /* ARCv2 accumulator/extra registers */ #define NT_VMCOREDD 0x700 /* Vmcore Device Dump Note */ #define NT_MIPS_DSP 0x800 /* MIPS DSP ASE registers */ diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index b4f2d134e713..9ca87bc73c44 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1617,6 +1617,8 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT = 87, ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT = 88, ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89, + ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90, + ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91, /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS }; diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 5dcd24cb33ea..e2bf36e6964b 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -79,6 +79,7 @@ enum { ETHTOOL_MSG_TSINFO_GET_REPLY, ETHTOOL_MSG_CABLE_TEST_NTF, ETHTOOL_MSG_CABLE_TEST_TDR_NTF, + ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY, /* add new constants above here */ __ETHTOOL_MSG_KERNEL_CNT, @@ -91,9 +92,12 @@ enum { #define ETHTOOL_FLAG_COMPACT_BITSETS (1 << 0) /* provide optional reply for SET or ACT requests */ #define ETHTOOL_FLAG_OMIT_REPLY (1 << 1) +/* request statistics, if supported by the driver */ +#define ETHTOOL_FLAG_STATS (1 << 2) #define ETHTOOL_FLAG_ALL (ETHTOOL_FLAG_COMPACT_BITSETS | \ - ETHTOOL_FLAG_OMIT_REPLY) + ETHTOOL_FLAG_OMIT_REPLY | \ + ETHTOOL_FLAG_STATS) enum { ETHTOOL_A_HEADER_UNSPEC, @@ -376,12 +380,25 @@ enum { ETHTOOL_A_PAUSE_AUTONEG, /* u8 */ ETHTOOL_A_PAUSE_RX, /* u8 */ ETHTOOL_A_PAUSE_TX, /* u8 */ + ETHTOOL_A_PAUSE_STATS, /* nest - _PAUSE_STAT_* */ /* add new constants above here */ __ETHTOOL_A_PAUSE_CNT, ETHTOOL_A_PAUSE_MAX = (__ETHTOOL_A_PAUSE_CNT - 1) }; +enum { + ETHTOOL_A_PAUSE_STAT_UNSPEC, + ETHTOOL_A_PAUSE_STAT_PAD, + + ETHTOOL_A_PAUSE_STAT_TX_FRAMES, + ETHTOOL_A_PAUSE_STAT_RX_FRAMES, + + /* add new constants above here */ + __ETHTOOL_A_PAUSE_STAT_CNT, + ETHTOOL_A_PAUSE_STAT_MAX = (__ETHTOOL_A_PAUSE_STAT_CNT - 1) +}; + /* EEE */ enum { diff --git a/include/uapi/linux/fscrypt.h b/include/uapi/linux/fscrypt.h index 7875709ccfeb..e5de60336938 100644 --- a/include/uapi/linux/fscrypt.h +++ b/include/uapi/linux/fscrypt.h @@ -45,7 +45,6 @@ struct fscrypt_policy_v1 { __u8 flags; __u8 master_key_descriptor[FSCRYPT_KEY_DESCRIPTOR_SIZE]; }; -#define fscrypt_policy fscrypt_policy_v1 /* * Process-subscribed "logon" key description prefix and payload format. @@ -156,9 +155,9 @@ struct fscrypt_get_key_status_arg { __u32 __out_reserved[13]; }; -#define FS_IOC_SET_ENCRYPTION_POLICY _IOR('f', 19, struct fscrypt_policy) +#define FS_IOC_SET_ENCRYPTION_POLICY _IOR('f', 19, struct fscrypt_policy_v1) #define FS_IOC_GET_ENCRYPTION_PWSALT _IOW('f', 20, __u8[16]) -#define FS_IOC_GET_ENCRYPTION_POLICY _IOW('f', 21, struct fscrypt_policy) +#define FS_IOC_GET_ENCRYPTION_POLICY _IOW('f', 21, struct fscrypt_policy_v1) #define FS_IOC_GET_ENCRYPTION_POLICY_EX _IOWR('f', 22, __u8[9]) /* size + version */ #define FS_IOC_ADD_ENCRYPTION_KEY _IOWR('f', 23, struct fscrypt_add_key_arg) #define FS_IOC_REMOVE_ENCRYPTION_KEY _IOWR('f', 24, struct fscrypt_remove_key_arg) @@ -170,6 +169,7 @@ struct fscrypt_get_key_status_arg { /* old names; don't add anything new here! */ #ifndef __KERNEL__ +#define fscrypt_policy fscrypt_policy_v1 #define FS_KEY_DESCRIPTOR_SIZE FSCRYPT_KEY_DESCRIPTOR_SIZE #define FS_POLICY_FLAGS_PAD_4 FSCRYPT_POLICY_FLAGS_PAD_4 #define FS_POLICY_FLAGS_PAD_8 FSCRYPT_POLICY_FLAGS_PAD_8 diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h index 9c0636ec2286..d83f214b4134 100644 --- a/include/uapi/linux/genetlink.h +++ b/include/uapi/linux/genetlink.h @@ -64,6 +64,8 @@ enum { CTRL_ATTR_OPS, CTRL_ATTR_MCAST_GROUPS, CTRL_ATTR_POLICY, + CTRL_ATTR_OP_POLICY, + CTRL_ATTR_OP, __CTRL_ATTR_MAX, }; @@ -85,6 +87,15 @@ enum { __CTRL_ATTR_MCAST_GRP_MAX, }; +enum { + CTRL_ATTR_POLICY_UNSPEC, + CTRL_ATTR_POLICY_DO, + CTRL_ATTR_POLICY_DUMP, + + __CTRL_ATTR_POLICY_DUMP_MAX, + CTRL_ATTR_POLICY_DUMP_MAX = __CTRL_ATTR_POLICY_DUMP_MAX - 1 +}; + #define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h index 9c27cecf406f..07865c601099 100644 --- a/include/uapi/linux/gpio.h +++ b/include/uapi/linux/gpio.h @@ -11,9 +11,17 @@ #ifndef _UAPI_GPIO_H_ #define _UAPI_GPIO_H_ +#include <linux/const.h> #include <linux/ioctl.h> #include <linux/types.h> +/* + * The maximum size of name and label arrays. + * + * Must be a multiple of 8 to ensure 32/64-bit alignment of structs. + */ +#define GPIO_MAX_NAME_SIZE 32 + /** * struct gpiochip_info - Information about a certain GPIO chip * @name: the Linux kernel name of this GPIO chip @@ -22,11 +30,273 @@ * @lines: number of GPIO lines on this chip */ struct gpiochip_info { - char name[32]; - char label[32]; + char name[GPIO_MAX_NAME_SIZE]; + char label[GPIO_MAX_NAME_SIZE]; __u32 lines; }; +/* + * Maximum number of requested lines. + * + * Must be no greater than 64, as bitmaps are restricted here to 64-bits + * for simplicity, and a multiple of 2 to ensure 32/64-bit alignment of + * structs. + */ +#define GPIO_V2_LINES_MAX 64 + +/* + * The maximum number of configuration attributes associated with a line + * request. + */ +#define GPIO_V2_LINE_NUM_ATTRS_MAX 10 + +/** + * enum gpio_v2_line_flag - &struct gpio_v2_line_attribute.flags values + * @GPIO_V2_LINE_FLAG_USED: line is not available for request + * @GPIO_V2_LINE_FLAG_ACTIVE_LOW: line active state is physical low + * @GPIO_V2_LINE_FLAG_INPUT: line is an input + * @GPIO_V2_LINE_FLAG_OUTPUT: line is an output + * @GPIO_V2_LINE_FLAG_EDGE_RISING: line detects rising (inactive to active) + * edges + * @GPIO_V2_LINE_FLAG_EDGE_FALLING: line detects falling (active to + * inactive) edges + * @GPIO_V2_LINE_FLAG_OPEN_DRAIN: line is an open drain output + * @GPIO_V2_LINE_FLAG_OPEN_SOURCE: line is an open source output + * @GPIO_V2_LINE_FLAG_BIAS_PULL_UP: line has pull-up bias enabled + * @GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN: line has pull-down bias enabled + * @GPIO_V2_LINE_FLAG_BIAS_DISABLED: line has bias disabled + */ +enum gpio_v2_line_flag { + GPIO_V2_LINE_FLAG_USED = _BITULL(0), + GPIO_V2_LINE_FLAG_ACTIVE_LOW = _BITULL(1), + GPIO_V2_LINE_FLAG_INPUT = _BITULL(2), + GPIO_V2_LINE_FLAG_OUTPUT = _BITULL(3), + GPIO_V2_LINE_FLAG_EDGE_RISING = _BITULL(4), + GPIO_V2_LINE_FLAG_EDGE_FALLING = _BITULL(5), + GPIO_V2_LINE_FLAG_OPEN_DRAIN = _BITULL(6), + GPIO_V2_LINE_FLAG_OPEN_SOURCE = _BITULL(7), + GPIO_V2_LINE_FLAG_BIAS_PULL_UP = _BITULL(8), + GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN = _BITULL(9), + GPIO_V2_LINE_FLAG_BIAS_DISABLED = _BITULL(10), +}; + +/** + * struct gpio_v2_line_values - Values of GPIO lines + * @bits: a bitmap containing the value of the lines, set to 1 for active + * and 0 for inactive. + * @mask: a bitmap identifying the lines to get or set, with each bit + * number corresponding to the index into &struct + * gpio_v2_line_request.offsets. + */ +struct gpio_v2_line_values { + __aligned_u64 bits; + __aligned_u64 mask; +}; + +/** + * enum gpio_v2_line_attr_id - &struct gpio_v2_line_attribute.id values + * identifying which field of the attribute union is in use. + * @GPIO_V2_LINE_ATTR_ID_FLAGS: flags field is in use + * @GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES: values field is in use + * @GPIO_V2_LINE_ATTR_ID_DEBOUNCE: debounce_period_us is in use + */ +enum gpio_v2_line_attr_id { + GPIO_V2_LINE_ATTR_ID_FLAGS = 1, + GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES = 2, + GPIO_V2_LINE_ATTR_ID_DEBOUNCE = 3, +}; + +/** + * struct gpio_v2_line_attribute - a configurable attribute of a line + * @id: attribute identifier with value from &enum gpio_v2_line_attr_id + * @padding: reserved for future use and must be zero filled + * @flags: if id is GPIO_V2_LINE_ATTR_ID_FLAGS, the flags for the GPIO + * line, with values from enum gpio_v2_line_flag, such as + * GPIO_V2_LINE_FLAG_ACTIVE_LOW, GPIO_V2_LINE_FLAG_OUTPUT etc, OR:ed + * together. This overrides the default flags contained in the &struct + * gpio_v2_line_config for the associated line. + * @values: if id is GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES, a bitmap + * containing the values to which the lines will be set, with each bit + * number corresponding to the index into &struct + * gpio_v2_line_request.offsets. + * @debounce_period_us: if id is GPIO_V2_LINE_ATTR_ID_DEBOUNCE, the desired + * debounce period, in microseconds + */ +struct gpio_v2_line_attribute { + __u32 id; + __u32 padding; + union { + __aligned_u64 flags; + __aligned_u64 values; + __u32 debounce_period_us; + }; +}; + +/** + * struct gpio_v2_line_config_attribute - a configuration attribute + * associated with one or more of the requested lines. + * @attr: the configurable attribute + * @mask: a bitmap identifying the lines to which the attribute applies, + * with each bit number corresponding to the index into &struct + * gpio_v2_line_request.offsets. + */ +struct gpio_v2_line_config_attribute { + struct gpio_v2_line_attribute attr; + __aligned_u64 mask; +}; + +/** + * struct gpio_v2_line_config - Configuration for GPIO lines + * @flags: flags for the GPIO lines, with values from enum + * gpio_v2_line_flag, such as GPIO_V2_LINE_FLAG_ACTIVE_LOW, + * GPIO_V2_LINE_FLAG_OUTPUT etc, OR:ed together. This is the default for + * all requested lines but may be overridden for particular lines using + * attrs. + * @num_attrs: the number of attributes in attrs + * @padding: reserved for future use and must be zero filled + * @attrs: the configuration attributes associated with the requested + * lines. Any attribute should only be associated with a particular line + * once. If an attribute is associated with a line multiple times then the + * first occurrence (i.e. lowest index) has precedence. + */ +struct gpio_v2_line_config { + __aligned_u64 flags; + __u32 num_attrs; + /* Pad to fill implicit padding and reserve space for future use. */ + __u32 padding[5]; + struct gpio_v2_line_config_attribute attrs[GPIO_V2_LINE_NUM_ATTRS_MAX]; +}; + +/** + * struct gpio_v2_line_request - Information about a request for GPIO lines + * @offsets: an array of desired lines, specified by offset index for the + * associated GPIO chip + * @consumer: a desired consumer label for the selected GPIO lines such as + * "my-bitbanged-relay" + * @config: requested configuration for the lines. + * @num_lines: number of lines requested in this request, i.e. the number + * of valid fields in the GPIO_V2_LINES_MAX sized arrays, set to 1 to + * request a single line + * @event_buffer_size: a suggested minimum number of line events that the + * kernel should buffer. This is only relevant if edge detection is + * enabled in the configuration. Note that this is only a suggested value + * and the kernel may allocate a larger buffer or cap the size of the + * buffer. If this field is zero then the buffer size defaults to a minimum + * of num_lines*16. + * @padding: reserved for future use and must be zero filled + * @fd: if successful this field will contain a valid anonymous file handle + * after a GPIO_GET_LINE_IOCTL operation, zero or negative value means + * error + */ +struct gpio_v2_line_request { + __u32 offsets[GPIO_V2_LINES_MAX]; + char consumer[GPIO_MAX_NAME_SIZE]; + struct gpio_v2_line_config config; + __u32 num_lines; + __u32 event_buffer_size; + /* Pad to fill implicit padding and reserve space for future use. */ + __u32 padding[5]; + __s32 fd; +}; + +/** + * struct gpio_v2_line_info - Information about a certain GPIO line + * @name: the name of this GPIO line, such as the output pin of the line on + * the chip, a rail or a pin header name on a board, as specified by the + * GPIO chip, may be empty + * @consumer: a functional name for the consumer of this GPIO line as set + * by whatever is using it, will be empty if there is no current user but + * may also be empty if the consumer doesn't set this up + * @flags: flags for the GPIO line, such as GPIO_V2_LINE_FLAG_ACTIVE_LOW, + * GPIO_V2_LINE_FLAG_OUTPUT etc, OR:ed together + * @offset: the local offset on this GPIO chip, fill this in when + * requesting the line information from the kernel + * @num_attrs: the number of attributes in attrs + * @attrs: the configuration attributes associated with the line + * @padding: reserved for future use + */ +struct gpio_v2_line_info { + char name[GPIO_MAX_NAME_SIZE]; + char consumer[GPIO_MAX_NAME_SIZE]; + __u32 offset; + __u32 num_attrs; + __aligned_u64 flags; + struct gpio_v2_line_attribute attrs[GPIO_V2_LINE_NUM_ATTRS_MAX]; + /* Space reserved for future use. */ + __u32 padding[4]; +}; + +/** + * enum gpio_v2_line_changed_type - &struct gpio_v2_line_changed.event_type + * values + * @GPIO_V2_LINE_CHANGED_REQUESTED: line has been requested + * @GPIO_V2_LINE_CHANGED_RELEASED: line has been released + * @GPIO_V2_LINE_CHANGED_CONFIG: line has been reconfigured + */ +enum gpio_v2_line_changed_type { + GPIO_V2_LINE_CHANGED_REQUESTED = 1, + GPIO_V2_LINE_CHANGED_RELEASED = 2, + GPIO_V2_LINE_CHANGED_CONFIG = 3, +}; + +/** + * struct gpio_v2_line_info_changed - Information about a change in status + * of a GPIO line + * @info: updated line information + * @timestamp_ns: estimate of time of status change occurrence, in nanoseconds + * @event_type: the type of change with a value from enum + * gpio_v2_line_changed_type + * @padding: reserved for future use + */ +struct gpio_v2_line_info_changed { + struct gpio_v2_line_info info; + __aligned_u64 timestamp_ns; + __u32 event_type; + /* Pad struct to 64-bit boundary and reserve space for future use. */ + __u32 padding[5]; +}; + +/** + * enum gpio_v2_line_event_id - &struct gpio_v2_line_event.id values + * @GPIO_V2_LINE_EVENT_RISING_EDGE: event triggered by a rising edge + * @GPIO_V2_LINE_EVENT_FALLING_EDGE: event triggered by a falling edge + */ +enum gpio_v2_line_event_id { + GPIO_V2_LINE_EVENT_RISING_EDGE = 1, + GPIO_V2_LINE_EVENT_FALLING_EDGE = 2, +}; + +/** + * struct gpio_v2_line_event - The actual event being pushed to userspace + * @timestamp_ns: best estimate of time of event occurrence, in nanoseconds. + * The timestamp_ns is read from CLOCK_MONOTONIC and is intended to allow the + * accurate measurement of the time between events. It does not provide + * the wall-clock time. + * @id: event identifier with value from enum gpio_v2_line_event_id + * @offset: the offset of the line that triggered the event + * @seqno: the sequence number for this event in the sequence of events for + * all the lines in this line request + * @line_seqno: the sequence number for this event in the sequence of + * events on this particular line + * @padding: reserved for future use + */ +struct gpio_v2_line_event { + __aligned_u64 timestamp_ns; + __u32 id; + __u32 offset; + __u32 seqno; + __u32 line_seqno; + /* Space reserved for future use. */ + __u32 padding[6]; +}; + +/* + * ABI v1 + * + * This version of the ABI is deprecated. + * Use the latest version of the ABI, defined above, instead. + */ + /* Informational flags */ #define GPIOLINE_FLAG_KERNEL (1UL << 0) /* Line used by the kernel */ #define GPIOLINE_FLAG_IS_OUT (1UL << 1) @@ -48,12 +318,15 @@ struct gpiochip_info { * @consumer: a functional name for the consumer of this GPIO line as set by * whatever is using it, will be empty if there is no current user but may * also be empty if the consumer doesn't set this up + * + * This struct is part of ABI v1 and is deprecated. + * Use struct gpio_v2_line_info instead. */ struct gpioline_info { __u32 line_offset; __u32 flags; - char name[32]; - char consumer[32]; + char name[GPIO_MAX_NAME_SIZE]; + char consumer[GPIO_MAX_NAME_SIZE]; }; /* Maximum number of requested handles */ @@ -79,6 +352,9 @@ enum { * guarantee there are no implicit holes between it and subsequent members. * The 20-byte padding at the end makes sure we don't add any implicit padding * at the end of the structure on 64-bit architectures. + * + * This struct is part of ABI v1 and is deprecated. + * Use struct gpio_v2_line_info_changed instead. */ struct gpioline_info_changed { struct gpioline_info info; @@ -118,12 +394,15 @@ struct gpioline_info_changed { * @fd: if successful this field will contain a valid anonymous file handle * after a GPIO_GET_LINEHANDLE_IOCTL operation, zero or negative value * means error + * + * This struct is part of ABI v1 and is deprecated. + * Use struct gpio_v2_line_request instead. */ struct gpiohandle_request { __u32 lineoffsets[GPIOHANDLES_MAX]; __u32 flags; __u8 default_values[GPIOHANDLES_MAX]; - char consumer_label[32]; + char consumer_label[GPIO_MAX_NAME_SIZE]; __u32 lines; int fd; }; @@ -137,6 +416,9 @@ struct gpiohandle_request { * this specifies the default output value, should be 0 (low) or * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high) * @padding: reserved for future use and should be zero filled + * + * This struct is part of ABI v1 and is deprecated. + * Use struct gpio_v2_line_config instead. */ struct gpiohandle_config { __u32 flags; @@ -144,21 +426,19 @@ struct gpiohandle_config { __u32 padding[4]; /* padding for future use */ }; -#define GPIOHANDLE_SET_CONFIG_IOCTL _IOWR(0xB4, 0x0a, struct gpiohandle_config) - /** * struct gpiohandle_data - Information of values on a GPIO handle * @values: when getting the state of lines this contains the current * state of a line, when setting the state of lines these should contain * the desired target state + * + * This struct is part of ABI v1 and is deprecated. + * Use struct gpio_v2_line_values instead. */ struct gpiohandle_data { __u8 values[GPIOHANDLES_MAX]; }; -#define GPIOHANDLE_GET_LINE_VALUES_IOCTL _IOWR(0xB4, 0x08, struct gpiohandle_data) -#define GPIOHANDLE_SET_LINE_VALUES_IOCTL _IOWR(0xB4, 0x09, struct gpiohandle_data) - /* Eventrequest flags */ #define GPIOEVENT_REQUEST_RISING_EDGE (1UL << 0) #define GPIOEVENT_REQUEST_FALLING_EDGE (1UL << 1) @@ -177,12 +457,15 @@ struct gpiohandle_data { * @fd: if successful this field will contain a valid anonymous file handle * after a GPIO_GET_LINEEVENT_IOCTL operation, zero or negative value * means error + * + * This struct is part of ABI v1 and is deprecated. + * Use struct gpio_v2_line_request instead. */ struct gpioevent_request { __u32 lineoffset; __u32 handleflags; __u32 eventflags; - char consumer_label[32]; + char consumer_label[GPIO_MAX_NAME_SIZE]; int fd; }; @@ -196,17 +479,42 @@ struct gpioevent_request { * struct gpioevent_data - The actual event being pushed to userspace * @timestamp: best estimate of time of event occurrence, in nanoseconds * @id: event identifier + * + * This struct is part of ABI v1 and is deprecated. + * Use struct gpio_v2_line_event instead. */ struct gpioevent_data { __u64 timestamp; __u32 id; }; +/* + * v1 and v2 ioctl()s + */ #define GPIO_GET_CHIPINFO_IOCTL _IOR(0xB4, 0x01, struct gpiochip_info) +#define GPIO_GET_LINEINFO_UNWATCH_IOCTL _IOWR(0xB4, 0x0C, __u32) + +/* + * v2 ioctl()s + */ +#define GPIO_V2_GET_LINEINFO_IOCTL _IOWR(0xB4, 0x05, struct gpio_v2_line_info) +#define GPIO_V2_GET_LINEINFO_WATCH_IOCTL _IOWR(0xB4, 0x06, struct gpio_v2_line_info) +#define GPIO_V2_GET_LINE_IOCTL _IOWR(0xB4, 0x07, struct gpio_v2_line_request) +#define GPIO_V2_LINE_SET_CONFIG_IOCTL _IOWR(0xB4, 0x0D, struct gpio_v2_line_config) +#define GPIO_V2_LINE_GET_VALUES_IOCTL _IOWR(0xB4, 0x0E, struct gpio_v2_line_values) +#define GPIO_V2_LINE_SET_VALUES_IOCTL _IOWR(0xB4, 0x0F, struct gpio_v2_line_values) + +/* + * v1 ioctl()s + * + * These ioctl()s are deprecated. Use the v2 equivalent instead. + */ #define GPIO_GET_LINEINFO_IOCTL _IOWR(0xB4, 0x02, struct gpioline_info) -#define GPIO_GET_LINEINFO_WATCH_IOCTL _IOWR(0xB4, 0x0b, struct gpioline_info) -#define GPIO_GET_LINEINFO_UNWATCH_IOCTL _IOWR(0xB4, 0x0c, __u32) #define GPIO_GET_LINEHANDLE_IOCTL _IOWR(0xB4, 0x03, struct gpiohandle_request) #define GPIO_GET_LINEEVENT_IOCTL _IOWR(0xB4, 0x04, struct gpioevent_request) +#define GPIOHANDLE_GET_LINE_VALUES_IOCTL _IOWR(0xB4, 0x08, struct gpiohandle_data) +#define GPIOHANDLE_SET_LINE_VALUES_IOCTL _IOWR(0xB4, 0x09, struct gpiohandle_data) +#define GPIOHANDLE_SET_CONFIG_IOCTL _IOWR(0xB4, 0x0A, struct gpiohandle_config) +#define GPIO_GET_LINEINFO_WATCH_IOCTL _IOWR(0xB4, 0x0B, struct gpioline_info) #endif /* _UAPI_GPIO_H_ */ diff --git a/include/uapi/linux/gtp.h b/include/uapi/linux/gtp.h index c7d66755d212..79f9191bbb24 100644 --- a/include/uapi/linux/gtp.h +++ b/include/uapi/linux/gtp.h @@ -2,6 +2,8 @@ #ifndef _UAPI_LINUX_GTP_H_ #define _UAPI_LINUX_GTP_H_ +#define GTP_GENL_MCGRP_NAME "gtp" + enum gtp_genl_cmds { GTP_CMD_NEWPDP, GTP_CMD_DELPDP, diff --git a/include/uapi/linux/if_alg.h b/include/uapi/linux/if_alg.h index bc2bcdec377b..60b7c2efd921 100644 --- a/include/uapi/linux/if_alg.h +++ b/include/uapi/linux/if_alg.h @@ -35,6 +35,7 @@ struct af_alg_iv { #define ALG_SET_OP 3 #define ALG_SET_AEAD_ASSOCLEN 4 #define ALG_SET_AEAD_AUTHSIZE 5 +#define ALG_SET_DRBG_ENTROPY 6 /* Operations */ #define ALG_OP_DECRYPT 0 diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index c1227aecd38f..4c687686aa8f 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -455,10 +455,33 @@ enum { enum { MDBA_MDB_EATTR_UNSPEC, MDBA_MDB_EATTR_TIMER, + MDBA_MDB_EATTR_SRC_LIST, + MDBA_MDB_EATTR_GROUP_MODE, + MDBA_MDB_EATTR_SOURCE, + MDBA_MDB_EATTR_RTPROT, __MDBA_MDB_EATTR_MAX }; #define MDBA_MDB_EATTR_MAX (__MDBA_MDB_EATTR_MAX - 1) +/* per mdb entry source */ +enum { + MDBA_MDB_SRCLIST_UNSPEC, + MDBA_MDB_SRCLIST_ENTRY, + __MDBA_MDB_SRCLIST_MAX +}; +#define MDBA_MDB_SRCLIST_MAX (__MDBA_MDB_SRCLIST_MAX - 1) + +/* per mdb entry per source attributes + * these are embedded in MDBA_MDB_SRCLIST_ENTRY + */ +enum { + MDBA_MDB_SRCATTR_UNSPEC, + MDBA_MDB_SRCATTR_ADDRESS, + MDBA_MDB_SRCATTR_TIMER, + __MDBA_MDB_SRCATTR_MAX +}; +#define MDBA_MDB_SRCATTR_MAX (__MDBA_MDB_SRCATTR_MAX - 1) + /* multicast router types */ enum { MDB_RTR_TYPE_DISABLED, @@ -495,6 +518,8 @@ struct br_mdb_entry { __u8 state; #define MDB_FLAGS_OFFLOAD (1 << 0) #define MDB_FLAGS_FAST_LEAVE (1 << 1) +#define MDB_FLAGS_STAR_EXCL (1 << 2) +#define MDB_FLAGS_BLOCKED (1 << 3) __u8 flags; __u16 vid; struct { @@ -509,10 +534,23 @@ struct br_mdb_entry { enum { MDBA_SET_ENTRY_UNSPEC, MDBA_SET_ENTRY, + MDBA_SET_ENTRY_ATTRS, __MDBA_SET_ENTRY_MAX, }; #define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1) +/* [MDBA_SET_ENTRY_ATTRS] = { + * [MDBE_ATTR_xxx] + * ... + * } + */ +enum { + MDBE_ATTR_UNSPEC, + MDBE_ATTR_SOURCE, + __MDBE_ATTR_MAX, +}; +#define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1) + /* Embedded inside LINK_XSTATS_TYPE_BRIDGE */ enum { BRIDGE_XSTATS_UNSPEC, diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 7fba4de511de..c4b23f06f69e 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -7,24 +7,23 @@ /* This struct should be in sync with struct rtnl_link_stats64 */ struct rtnl_link_stats { - __u32 rx_packets; /* total packets received */ - __u32 tx_packets; /* total packets transmitted */ - __u32 rx_bytes; /* total bytes received */ - __u32 tx_bytes; /* total bytes transmitted */ - __u32 rx_errors; /* bad packets received */ - __u32 tx_errors; /* packet transmit problems */ - __u32 rx_dropped; /* no space in linux buffers */ - __u32 tx_dropped; /* no space available in linux */ - __u32 multicast; /* multicast packets received */ + __u32 rx_packets; + __u32 tx_packets; + __u32 rx_bytes; + __u32 tx_bytes; + __u32 rx_errors; + __u32 tx_errors; + __u32 rx_dropped; + __u32 tx_dropped; + __u32 multicast; __u32 collisions; - /* detailed rx_errors: */ __u32 rx_length_errors; - __u32 rx_over_errors; /* receiver ring buff overflow */ - __u32 rx_crc_errors; /* recved pkt with crc error */ - __u32 rx_frame_errors; /* recv'd frame alignment error */ - __u32 rx_fifo_errors; /* recv'r fifo overrun */ - __u32 rx_missed_errors; /* receiver missed packet */ + __u32 rx_over_errors; + __u32 rx_crc_errors; + __u32 rx_frame_errors; + __u32 rx_fifo_errors; + __u32 rx_missed_errors; /* detailed tx_errors */ __u32 tx_aborted_errors; @@ -37,29 +36,200 @@ struct rtnl_link_stats { __u32 rx_compressed; __u32 tx_compressed; - __u32 rx_nohandler; /* dropped, no handler found */ + __u32 rx_nohandler; }; -/* The main device statistics structure */ +/** + * struct rtnl_link_stats64 - The main device statistics structure. + * + * @rx_packets: Number of good packets received by the interface. + * For hardware interfaces counts all good packets received from the device + * by the host, including packets which host had to drop at various stages + * of processing (even in the driver). + * + * @tx_packets: Number of packets successfully transmitted. + * For hardware interfaces counts packets which host was able to successfully + * hand over to the device, which does not necessarily mean that packets + * had been successfully transmitted out of the device, only that device + * acknowledged it copied them out of host memory. + * + * @rx_bytes: Number of good received bytes, corresponding to @rx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @tx_bytes: Number of good transmitted bytes, corresponding to @tx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @rx_errors: Total number of bad packets received on this network device. + * This counter must include events counted by @rx_length_errors, + * @rx_crc_errors, @rx_frame_errors and other errors not otherwise + * counted. + * + * @tx_errors: Total number of transmit problems. + * This counter must include events counter by @tx_aborted_errors, + * @tx_carrier_errors, @tx_fifo_errors, @tx_heartbeat_errors, + * @tx_window_errors and other errors not otherwise counted. + * + * @rx_dropped: Number of packets received but not processed, + * e.g. due to lack of resources or unsupported protocol. + * For hardware interfaces this counter should not include packets + * dropped by the device which are counted separately in + * @rx_missed_errors (since procfs folds those two counters together). + * + * @tx_dropped: Number of packets dropped on their way to transmission, + * e.g. due to lack of resources. + * + * @multicast: Multicast packets received. + * For hardware interfaces this statistic is commonly calculated + * at the device level (unlike @rx_packets) and therefore may include + * packets which did not reach the host. + * + * For IEEE 802.3 devices this counter may be equivalent to: + * + * - 30.3.1.1.21 aMulticastFramesReceivedOK + * + * @collisions: Number of collisions during packet transmissions. + * + * @rx_length_errors: Number of packets dropped due to invalid length. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to a sum + * of the following attributes: + * + * - 30.3.1.1.23 aInRangeLengthErrors + * - 30.3.1.1.24 aOutOfRangeLengthField + * - 30.3.1.1.25 aFrameTooLongErrors + * + * @rx_over_errors: Receiver FIFO overflow event counter. + * + * Historically the count of overflow events. Such events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * The recommended interpretation for high speed interfaces is - + * number of packets dropped because they did not fit into buffers + * provided by the host, e.g. packets larger than MTU or next buffer + * in the ring was not available for a scatter transfer. + * + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * This statistics was historically used interchangeably with + * @rx_fifo_errors. + * + * This statistic corresponds to hardware events and is not commonly used + * on software devices. + * + * @rx_crc_errors: Number of packets received with a CRC error. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.6 aFrameCheckSequenceErrors + * + * @rx_frame_errors: Receiver frame alignment errors. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to: + * + * - 30.3.1.1.7 aAlignmentErrors + * + * @rx_fifo_errors: Receiver FIFO error counter. + * + * Historically the count of overflow events. Those events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * This statistics was used interchangeably with @rx_over_errors. + * Not recommended for use in drivers for high speed interfaces. + * + * This statistic is used on software devices, e.g. to count software + * packet queue overflow (can) or sequencing errors (GRE). + * + * @rx_missed_errors: Count of packets missed by the host. + * Folded into the "drop" counter in `/proc/net/dev`. + * + * Counts number of packets dropped by the device due to lack + * of buffer space. This usually indicates that the host interface + * is slower than the network interface, or host is not keeping up + * with the receive packet rate. + * + * This statistic corresponds to hardware events and is not used + * on software devices. + * + * @tx_aborted_errors: + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * For IEEE 802.3 devices capable of half-duplex operation this counter + * must be equivalent to: + * + * - 30.3.1.1.11 aFramesAbortedDueToXSColls + * + * High speed interfaces may use this counter as a general device + * discard counter. + * + * @tx_carrier_errors: Number of frame transmission errors due to loss + * of carrier during transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.13 aCarrierSenseErrors + * + * @tx_fifo_errors: Number of frame transmission errors due to device + * FIFO underrun / underflow. This condition occurs when the device + * begins transmission of a frame but is unable to deliver the + * entire frame to the transmitter in time for transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * @tx_heartbeat_errors: Number of Heartbeat / SQE Test errors for + * old half-duplex Ethernet. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices possibly equivalent to: + * + * - 30.3.2.1.4 aSQETestErrors + * + * @tx_window_errors: Number of frame transmission errors due + * to late collisions (for Ethernet - after the first 64B of transmission). + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.10 aLateCollisions + * + * @rx_compressed: Number of correctly received compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @tx_compressed: Number of transmitted compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @rx_nohandler: Number of packets received on the interface + * but dropped by the networking stack because the device is + * not designated to receive packets (e.g. backup link in a bond). + */ struct rtnl_link_stats64 { - __u64 rx_packets; /* total packets received */ - __u64 tx_packets; /* total packets transmitted */ - __u64 rx_bytes; /* total bytes received */ - __u64 tx_bytes; /* total bytes transmitted */ - __u64 rx_errors; /* bad packets received */ - __u64 tx_errors; /* packet transmit problems */ - __u64 rx_dropped; /* no space in linux buffers */ - __u64 tx_dropped; /* no space available in linux */ - __u64 multicast; /* multicast packets received */ + __u64 rx_packets; + __u64 tx_packets; + __u64 rx_bytes; + __u64 tx_bytes; + __u64 rx_errors; + __u64 tx_errors; + __u64 rx_dropped; + __u64 tx_dropped; + __u64 multicast; __u64 collisions; /* detailed rx_errors: */ __u64 rx_length_errors; - __u64 rx_over_errors; /* receiver ring buff overflow */ - __u64 rx_crc_errors; /* recved pkt with crc error */ - __u64 rx_frame_errors; /* recv'd frame alignment error */ - __u64 rx_fifo_errors; /* recv'r fifo overrun */ - __u64 rx_missed_errors; /* receiver missed packet */ + __u64 rx_over_errors; + __u64 rx_crc_errors; + __u64 rx_frame_errors; + __u64 rx_fifo_errors; + __u64 rx_missed_errors; /* detailed tx_errors */ __u64 tx_aborted_errors; @@ -71,8 +241,7 @@ struct rtnl_link_stats64 { /* for cslip etc */ __u64 rx_compressed; __u64 tx_compressed; - - __u64 rx_nohandler; /* dropped, no handler found */ + __u64 rx_nohandler; }; /* The struct should be in sync with struct ifmap */ diff --git a/include/uapi/linux/if_pppol2tp.h b/include/uapi/linux/if_pppol2tp.h index 060b4d1f3129..a91044328bc9 100644 --- a/include/uapi/linux/if_pppol2tp.h +++ b/include/uapi/linux/if_pppol2tp.h @@ -75,7 +75,7 @@ struct pppol2tpv3in6_addr { }; /* Socket options: - * DEBUG - bitmask of debug message categories + * DEBUG - bitmask of debug message categories (not used) * SENDSEQ - 0 => don't send packets with sequence numbers * 1 => send packets with sequence numbers * RECVSEQ - 0 => receive packet sequence numbers are optional diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index fdd81affca4b..48c13147c0a8 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -94,6 +94,7 @@ enum iio_modifier { IIO_MOD_PM10, IIO_MOD_ETHANOL, IIO_MOD_H2, + IIO_MOD_O2, }; enum iio_event_type { diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h index 3d0d8231dc19..7d6687618d80 100644 --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -135,7 +135,7 @@ struct in_addr { * this socket to prevent accepting spoofed ones. */ #define IP_PMTUDISC_INTERFACE 4 -/* weaker version of IP_PMTUDISC_INTERFACE, which allos packets to get +/* weaker version of IP_PMTUDISC_INTERFACE, which allows packets to get * fragmented if they exeed the interface mtu */ #define IP_PMTUDISC_OMIT 5 diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h index 5ba122c1949a..20ee93f0f876 100644 --- a/include/uapi/linux/inet_diag.h +++ b/include/uapi/linux/inet_diag.h @@ -160,6 +160,7 @@ enum { INET_DIAG_ULP_INFO, INET_DIAG_SK_BPF_STORAGES, INET_DIAG_CGROUP_ID, + INET_DIAG_SOCKOPT, __INET_DIAG_MAX, }; @@ -183,6 +184,23 @@ struct inet_diag_meminfo { __u32 idiag_tmem; }; +/* INET_DIAG_SOCKOPT */ + +struct inet_diag_sockopt { + __u8 recverr:1, + is_icsk:1, + freebind:1, + hdrincl:1, + mc_loop:1, + transparent:1, + mc_all:1, + nodefrag:1; + __u8 bind_address_no_port:1, + recverr_rfc4884:1, + defer_connect:1, + unused:5; +}; + /* INET_DIAG_VEGASINFO */ struct tcpvegas_info { diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h index d65fde732518..98d8e06dea22 100644 --- a/include/uapi/linux/io_uring.h +++ b/include/uapi/linux/io_uring.h @@ -95,6 +95,7 @@ enum { #define IORING_SETUP_CQSIZE (1U << 3) /* app defines CQ size */ #define IORING_SETUP_CLAMP (1U << 4) /* clamp SQ/CQ ring sizes */ #define IORING_SETUP_ATTACH_WQ (1U << 5) /* attach to existing wq */ +#define IORING_SETUP_R_DISABLED (1U << 6) /* start with ring disabled */ enum { IORING_OP_NOP, @@ -224,6 +225,7 @@ struct io_cqring_offsets { */ #define IORING_ENTER_GETEVENTS (1U << 0) #define IORING_ENTER_SQ_WAKEUP (1U << 1) +#define IORING_ENTER_SQ_WAIT (1U << 2) /* * Passed in for io_uring_setup(2). Copied back with updated info on success @@ -255,17 +257,24 @@ struct io_uring_params { /* * io_uring_register(2) opcodes and arguments */ -#define IORING_REGISTER_BUFFERS 0 -#define IORING_UNREGISTER_BUFFERS 1 -#define IORING_REGISTER_FILES 2 -#define IORING_UNREGISTER_FILES 3 -#define IORING_REGISTER_EVENTFD 4 -#define IORING_UNREGISTER_EVENTFD 5 -#define IORING_REGISTER_FILES_UPDATE 6 -#define IORING_REGISTER_EVENTFD_ASYNC 7 -#define IORING_REGISTER_PROBE 8 -#define IORING_REGISTER_PERSONALITY 9 -#define IORING_UNREGISTER_PERSONALITY 10 +enum { + IORING_REGISTER_BUFFERS = 0, + IORING_UNREGISTER_BUFFERS = 1, + IORING_REGISTER_FILES = 2, + IORING_UNREGISTER_FILES = 3, + IORING_REGISTER_EVENTFD = 4, + IORING_UNREGISTER_EVENTFD = 5, + IORING_REGISTER_FILES_UPDATE = 6, + IORING_REGISTER_EVENTFD_ASYNC = 7, + IORING_REGISTER_PROBE = 8, + IORING_REGISTER_PERSONALITY = 9, + IORING_UNREGISTER_PERSONALITY = 10, + IORING_REGISTER_RESTRICTIONS = 11, + IORING_REGISTER_ENABLE_RINGS = 12, + + /* this goes last */ + IORING_REGISTER_LAST +}; struct io_uring_files_update { __u32 offset; @@ -290,4 +299,34 @@ struct io_uring_probe { struct io_uring_probe_op ops[0]; }; +struct io_uring_restriction { + __u16 opcode; + union { + __u8 register_op; /* IORING_RESTRICTION_REGISTER_OP */ + __u8 sqe_op; /* IORING_RESTRICTION_SQE_OP */ + __u8 sqe_flags; /* IORING_RESTRICTION_SQE_FLAGS_* */ + }; + __u8 resv; + __u32 resv2[3]; +}; + +/* + * io_uring_restriction->opcode values + */ +enum { + /* Allow an io_uring_register(2) opcode */ + IORING_RESTRICTION_REGISTER_OP = 0, + + /* Allow an sqe opcode */ + IORING_RESTRICTION_SQE_OP = 1, + + /* Allow sqe flags */ + IORING_RESTRICTION_SQE_FLAGS_ALLOWED = 2, + + /* Require sqe flags (these flags must be set on each submission) */ + IORING_RESTRICTION_SQE_FLAGS_REQUIRED = 3, + + IORING_RESTRICTION_LAST +}; + #endif diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h index c2b2caf9ed41..e1d9e75f2c94 100644 --- a/include/uapi/linux/iommu.h +++ b/include/uapi/linux/iommu.h @@ -139,6 +139,7 @@ enum iommu_page_response_code { /** * struct iommu_page_response - Generic page response information + * @argsz: User filled size of this data * @version: API version of this structure * @flags: encodes whether the corresponding fields are valid * (IOMMU_FAULT_PAGE_RESPONSE_* values) @@ -147,6 +148,7 @@ enum iommu_page_response_code { * @code: response code from &enum iommu_page_response_code */ struct iommu_page_response { + __u32 argsz; #define IOMMU_PAGE_RESP_VERSION_1 1 __u32 version; #define IOMMU_PAGE_RESP_PASID_VALID (1 << 0) @@ -222,6 +224,7 @@ struct iommu_inv_pasid_info { /** * struct iommu_cache_invalidate_info - First level/stage invalidation * information + * @argsz: User filled size of this data * @version: API version of this structure * @cache: bitfield that allows to select which caches to invalidate * @granularity: defines the lowest granularity used for the invalidation: @@ -250,6 +253,7 @@ struct iommu_inv_pasid_info { * must support the used granularity. */ struct iommu_cache_invalidate_info { + __u32 argsz; #define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1 __u32 version; /* IOMMU paging structure cache */ @@ -259,11 +263,11 @@ struct iommu_cache_invalidate_info { #define IOMMU_CACHE_INV_TYPE_NR (3) __u8 cache; __u8 granularity; - __u8 padding[2]; + __u8 padding[6]; union { struct iommu_inv_pasid_info pasid_info; struct iommu_inv_addr_info addr_info; - }; + } granu; }; /** @@ -284,6 +288,7 @@ struct iommu_gpasid_bind_data_vtd { #define IOMMU_SVA_VTD_GPASID_PWT (1 << 3) /* page-level write through */ #define IOMMU_SVA_VTD_GPASID_EMTE (1 << 4) /* extended mem type enable */ #define IOMMU_SVA_VTD_GPASID_CD (1 << 5) /* PASID-level cache disable */ +#define IOMMU_SVA_VTD_GPASID_LAST (1 << 6) __u64 flags; __u32 pat; __u32 emt; @@ -296,6 +301,7 @@ struct iommu_gpasid_bind_data_vtd { /** * struct iommu_gpasid_bind_data - Information about device and guest PASID binding + * @argsz: User filled size of this data * @version: Version of this data structure * @format: PASID table entry format * @flags: Additional information on guest bind request @@ -313,21 +319,23 @@ struct iommu_gpasid_bind_data_vtd { * PASID to host PASID based on this bind data. */ struct iommu_gpasid_bind_data { + __u32 argsz; #define IOMMU_GPASID_BIND_VERSION_1 1 __u32 version; #define IOMMU_PASID_FORMAT_INTEL_VTD 1 +#define IOMMU_PASID_FORMAT_LAST 2 __u32 format; + __u32 addr_width; #define IOMMU_SVA_GPASID_VAL (1 << 0) /* guest PASID valid */ __u64 flags; __u64 gpgd; __u64 hpasid; __u64 gpasid; - __u32 addr_width; - __u8 padding[12]; + __u8 padding[8]; /* Vendor specific data */ union { struct iommu_gpasid_bind_data_vtd vtd; - }; + } vendor; }; #endif /* _UAPI_IOMMU_H */ diff --git a/include/uapi/linux/ipmi_msgdefs.h b/include/uapi/linux/ipmi_msgdefs.h index c2b23a9fdf3d..0934af3b8037 100644 --- a/include/uapi/linux/ipmi_msgdefs.h +++ b/include/uapi/linux/ipmi_msgdefs.h @@ -69,6 +69,8 @@ #define IPMI_ERR_MSG_TRUNCATED 0xc6 #define IPMI_REQ_LEN_INVALID_ERR 0xc7 #define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8 +#define IPMI_DEVICE_IN_FW_UPDATE_ERR 0xd1 +#define IPMI_DEVICE_IN_INIT_ERR 0xd2 #define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */ #define IPMI_LOST_ARBITRATION_ERR 0x81 #define IPMI_BUS_ERR 0x82 diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index f738c3b53f4e..695b606da4b1 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -449,8 +449,15 @@ struct kfd_ioctl_import_dmabuf_args { /* * KFD SMI(System Management Interface) events */ -/* Event type (defined by bitmask) */ -#define KFD_SMI_EVENT_VMFAULT 0x0000000000000001 +enum kfd_smi_event { + KFD_SMI_EVENT_NONE = 0, /* not used */ + KFD_SMI_EVENT_VMFAULT = 1, /* event start counting at 1 */ + KFD_SMI_EVENT_THERMAL_THROTTLE = 2, + KFD_SMI_EVENT_GPU_PRE_RESET = 3, + KFD_SMI_EVENT_GPU_POST_RESET = 4, +}; + +#define KFD_SMI_EVENT_MASK_FROM_INDEX(i) (1ULL << ((i) - 1)) struct kfd_ioctl_smi_events_args { __u32 gpuid; /* to KFD */ diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index f6d86033c4fa..7d8eced6f459 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -790,9 +790,10 @@ struct kvm_ppc_resize_hpt { #define KVM_VM_PPC_HV 1 #define KVM_VM_PPC_PR 2 -/* on MIPS, 0 forces trap & emulate, 1 forces VZ ASE */ -#define KVM_VM_MIPS_TE 0 +/* on MIPS, 0 indicates auto, 1 forces VZ ASE, 2 forces trap & emulate */ +#define KVM_VM_MIPS_AUTO 0 #define KVM_VM_MIPS_VZ 1 +#define KVM_VM_MIPS_TE 2 #define KVM_S390_SIE_PAGE_OFFSET 1 @@ -1035,6 +1036,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_LAST_CPU 184 #define KVM_CAP_SMALLER_MAXPHYADDR 185 #define KVM_CAP_S390_DIAG318 186 +#define KVM_CAP_STEAL_TIME 187 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h index 61158f5a1a5b..30c80d5ba4bf 100644 --- a/include/uapi/linux/l2tp.h +++ b/include/uapi/linux/l2tp.h @@ -108,7 +108,7 @@ enum { L2TP_ATTR_VLAN_ID, /* u16 (not used) */ L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */ L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */ - L2TP_ATTR_DEBUG, /* u32, enum l2tp_debug_flags */ + L2TP_ATTR_DEBUG, /* u32, enum l2tp_debug_flags (not used) */ L2TP_ATTR_RECV_SEQ, /* u8 */ L2TP_ATTR_SEND_SEQ, /* u8 */ L2TP_ATTR_LNS_MODE, /* u8 */ @@ -144,6 +144,7 @@ enum { L2TP_ATTR_RX_OOS_PACKETS, /* u64 */ L2TP_ATTR_RX_ERRORS, /* u64 */ L2TP_ATTR_STATS_PAD, + L2TP_ATTR_RX_COOKIE_DISCARDS, /* u64 */ __L2TP_ATTR_STATS_MAX, }; @@ -177,7 +178,9 @@ enum l2tp_seqmode { }; /** - * enum l2tp_debug_flags - debug message categories for L2TP tunnels/sessions + * enum l2tp_debug_flags - debug message categories for L2TP tunnels/sessions. + * + * Unused. * * @L2TP_MSG_DEBUG: verbose debug (if compiled in) * @L2TP_MSG_CONTROL: userspace - kernel interface diff --git a/include/uapi/linux/mei.h b/include/uapi/linux/mei.h index c6aec86cc5de..4f3638489d01 100644 --- a/include/uapi/linux/mei.h +++ b/include/uapi/linux/mei.h @@ -66,4 +66,53 @@ struct mei_connect_client_data { */ #define IOCTL_MEI_NOTIFY_GET _IOR('H', 0x03, __u32) +/** + * struct mei_connect_client_vtag - mei client information struct with vtag + * + * @in_client_uuid: UUID of client to connect + * @vtag: virtual tag + * @reserved: reserved for future use + */ +struct mei_connect_client_vtag { + uuid_le in_client_uuid; + __u8 vtag; + __u8 reserved[3]; +}; + +/** + * struct mei_connect_client_data_vtag - IOCTL connect data union + * + * @connect: input connect data + * @out_client_properties: output client data + */ +struct mei_connect_client_data_vtag { + union { + struct mei_connect_client_vtag connect; + struct mei_client out_client_properties; + }; +}; + +/** + * DOC: + * This IOCTL is used to associate the current file descriptor with a + * FW Client (given by UUID), and virtual tag (vtag). + * The IOCTL opens a communication channel between a host client and + * a FW client on a tagged channel. From this point on, every read + * and write will communicate with the associated FW client with + * on the tagged channel. + * Upone close() the communication is terminated. + * + * The IOCTL argument is a struct with a union that contains + * the input parameter and the output parameter for this IOCTL. + * + * The input parameter is UUID of the FW Client, a vtag [0,255] + * The output parameter is the properties of the FW client + * (FW protocool version and max message size). + * + * Clients that do not support tagged connection + * will respond with -EOPNOTSUPP. + */ +#define IOCTL_MEI_CONNECT_CLIENT_VTAG \ + _IOWR('H', 0x04, struct mei_connect_client_data_vtag) + #endif /* _LINUX_MEI_H */ diff --git a/include/uapi/linux/membarrier.h b/include/uapi/linux/membarrier.h index 5891d7614c8c..737605897f36 100644 --- a/include/uapi/linux/membarrier.h +++ b/include/uapi/linux/membarrier.h @@ -114,6 +114,26 @@ * If this command is not implemented by an * architecture, -EINVAL is returned. * Returns 0 on success. + * @MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ: + * Ensure the caller thread, upon return from + * system call, that all its running thread + * siblings have any currently running rseq + * critical sections restarted if @flags + * parameter is 0; if @flags parameter is + * MEMBARRIER_CMD_FLAG_CPU, + * then this operation is performed only + * on CPU indicated by @cpu_id. If this command is + * not implemented by an architecture, -EINVAL + * is returned. A process needs to register its + * intent to use the private expedited rseq + * command prior to using it, otherwise + * this command returns -EPERM. + * @MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ: + * Register the process intent to use + * MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ. + * If this command is not implemented by an + * architecture, -EINVAL is returned. + * Returns 0 on success. * @MEMBARRIER_CMD_SHARED: * Alias to MEMBARRIER_CMD_GLOBAL. Provided for * header backward compatibility. @@ -131,9 +151,15 @@ enum membarrier_cmd { MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED = (1 << 4), MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE = (1 << 5), MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE = (1 << 6), + MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ = (1 << 7), + MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ = (1 << 8), /* Alias for header backward compatibility. */ MEMBARRIER_CMD_SHARED = MEMBARRIER_CMD_GLOBAL, }; +enum membarrier_cmd_flag { + MEMBARRIER_CMD_FLAG_CPU = (1 << 0), +}; + #endif /* _UAPI_LINUX_MEMBARRIER_H */ diff --git a/include/uapi/linux/mman.h b/include/uapi/linux/mman.h index 923cc162609c..f55bc680b5b0 100644 --- a/include/uapi/linux/mman.h +++ b/include/uapi/linux/mman.h @@ -27,6 +27,7 @@ #define MAP_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT #define MAP_HUGE_MASK HUGETLB_FLAG_ENCODE_MASK +#define MAP_HUGE_16KB HUGETLB_FLAG_ENCODE_16KB #define MAP_HUGE_64KB HUGETLB_FLAG_ENCODE_64KB #define MAP_HUGE_512KB HUGETLB_FLAG_ENCODE_512KB #define MAP_HUGE_1MB HUGETLB_FLAG_ENCODE_1MB diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h index 11c8c1fc1124..1a42f5f9b31b 100644 --- a/include/uapi/linux/mroute.h +++ b/include/uapi/linux/mroute.h @@ -113,8 +113,8 @@ struct igmpmsg { __u32 unused1,unused2; unsigned char im_msgtype; /* What is this */ unsigned char im_mbz; /* Must be zero */ - unsigned char im_vif; /* Interface (this ought to be a vifi_t!) */ - unsigned char unused3; + unsigned char im_vif; /* Low 8 bits of Interface */ + unsigned char im_vif_hi; /* High 8 bits of Interface */ struct in_addr im_src,im_dst; }; @@ -169,6 +169,7 @@ enum { IPMRA_CREPORT_SRC_ADDR, IPMRA_CREPORT_DST_ADDR, IPMRA_CREPORT_PKT, + IPMRA_CREPORT_TABLE, __IPMRA_CREPORT_MAX }; #define IPMRA_CREPORT_MAX (__IPMRA_CREPORT_MAX - 1) diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h index ca9e63d6e0e4..ef9a44286e23 100644 --- a/include/uapi/linux/netfilter.h +++ b/include/uapi/linux/netfilter.h @@ -45,7 +45,8 @@ enum nf_inet_hooks { NF_INET_FORWARD, NF_INET_LOCAL_OUT, NF_INET_POST_ROUTING, - NF_INET_NUMHOOKS + NF_INET_NUMHOOKS, + NF_INET_INGRESS = NF_INET_NUMHOOKS, }; enum nf_dev_hooks { diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index 42f351c1f5c5..98272cb5f617 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -133,7 +133,7 @@ enum nf_tables_msg_types { * @NFTA_LIST_ELEM: list element (NLA_NESTED) */ enum nft_list_attributes { - NFTA_LIST_UNPEC, + NFTA_LIST_UNSPEC, NFTA_LIST_ELEM, __NFTA_LIST_MAX }; @@ -172,6 +172,7 @@ enum nft_table_flags { * @NFTA_TABLE_NAME: name of the table (NLA_STRING) * @NFTA_TABLE_FLAGS: bitmask of enum nft_table_flags (NLA_U32) * @NFTA_TABLE_USE: number of chains in this table (NLA_U32) + * @NFTA_TABLE_USERDATA: user data (NLA_BINARY) */ enum nft_table_attributes { NFTA_TABLE_UNSPEC, @@ -180,6 +181,7 @@ enum nft_table_attributes { NFTA_TABLE_USE, NFTA_TABLE_HANDLE, NFTA_TABLE_PAD, + NFTA_TABLE_USERDATA, __NFTA_TABLE_MAX }; #define NFTA_TABLE_MAX (__NFTA_TABLE_MAX - 1) @@ -206,6 +208,7 @@ enum nft_chain_flags { * @NFTA_CHAIN_COUNTERS: counter specification of the chain (NLA_NESTED: nft_counter_attributes) * @NFTA_CHAIN_FLAGS: chain flags * @NFTA_CHAIN_ID: uniquely identifies a chain in a transaction (NLA_U32) + * @NFTA_CHAIN_USERDATA: user data (NLA_BINARY) */ enum nft_chain_attributes { NFTA_CHAIN_UNSPEC, @@ -220,6 +223,7 @@ enum nft_chain_attributes { NFTA_CHAIN_PAD, NFTA_CHAIN_FLAGS, NFTA_CHAIN_ID, + NFTA_CHAIN_USERDATA, __NFTA_CHAIN_MAX }; #define NFTA_CHAIN_MAX (__NFTA_CHAIN_MAX - 1) @@ -745,10 +749,12 @@ enum nft_payload_bases { * * @NFT_PAYLOAD_CSUM_NONE: no checksumming * @NFT_PAYLOAD_CSUM_INET: internet checksum (RFC 791) + * @NFT_PAYLOAD_CSUM_SCTP: CRC-32c, for use in SCTP header (RFC 3309) */ enum nft_payload_csum_types { NFT_PAYLOAD_CSUM_NONE, NFT_PAYLOAD_CSUM_INET, + NFT_PAYLOAD_CSUM_SCTP, }; enum nft_payload_csum_flags { @@ -1008,10 +1014,12 @@ enum nft_socket_attributes { * * @NFT_SOCKET_TRANSPARENT: Value of the IP(V6)_TRANSPARENT socket option * @NFT_SOCKET_MARK: Value of the socket mark + * @NFT_SOCKET_WILDCARD: Whether the socket is zero-bound (e.g. 0.0.0.0 or ::0) */ enum nft_socket_keys { NFT_SOCKET_TRANSPARENT, NFT_SOCKET_MARK, + NFT_SOCKET_WILDCARD, __NFT_SOCKET_MAX }; #define NFT_SOCKET_MAX (__NFT_SOCKET_MAX - 1) @@ -1555,6 +1563,7 @@ enum nft_ct_expectation_attributes { * @NFTA_OBJ_DATA: stateful object data (NLA_NESTED) * @NFTA_OBJ_USE: number of references to this expression (NLA_U32) * @NFTA_OBJ_HANDLE: object handle (NLA_U64) + * @NFTA_OBJ_USERDATA: user data (NLA_BINARY) */ enum nft_object_attributes { NFTA_OBJ_UNSPEC, @@ -1565,6 +1574,7 @@ enum nft_object_attributes { NFTA_OBJ_USE, NFTA_OBJ_HANDLE, NFTA_OBJ_PAD, + NFTA_OBJ_USERDATA, __NFTA_OBJ_MAX }; #define NFTA_OBJ_MAX (__NFTA_OBJ_MAX - 1) diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 262881792671..d8484be72fdc 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -247,7 +247,7 @@ enum ctattr_stats_cpu { CTA_STATS_FOUND, CTA_STATS_NEW, /* no longer used */ CTA_STATS_INVALID, - CTA_STATS_IGNORE, + CTA_STATS_IGNORE, /* no longer used */ CTA_STATS_DELETE, /* no longer used */ CTA_STATS_DELETE_LIST, /* no longer used */ CTA_STATS_INSERT, @@ -256,6 +256,7 @@ enum ctattr_stats_cpu { CTA_STATS_EARLY_DROP, CTA_STATS_ERROR, CTA_STATS_SEARCH_RESTART, + CTA_STATS_CLASH_RESOLVE, __CTA_STATS_MAX, }; #define CTA_STATS_MAX (__CTA_STATS_MAX - 1) diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h index eac8a6a648ea..c3816ff7bfc3 100644 --- a/include/uapi/linux/netlink.h +++ b/include/uapi/linux/netlink.h @@ -129,6 +129,7 @@ struct nlmsgerr { * @NLMSGERR_ATTR_COOKIE: arbitrary subsystem specific cookie to * be used - in the success case - to identify a created * object or operation or similar (binary) + * @NLMSGERR_ATTR_POLICY: policy for a rejected attribute * @__NLMSGERR_ATTR_MAX: number of attributes * @NLMSGERR_ATTR_MAX: highest attribute number */ @@ -137,6 +138,7 @@ enum nlmsgerr_attrs { NLMSGERR_ATTR_MSG, NLMSGERR_ATTR_OFFS, NLMSGERR_ATTR_COOKIE, + NLMSGERR_ATTR_POLICY, __NLMSGERR_ATTR_MAX, NLMSGERR_ATTR_MAX = __NLMSGERR_ATTR_MAX - 1 @@ -331,6 +333,7 @@ enum netlink_attribute_type { * the index, if limited inside the nesting (U32) * @NL_POLICY_TYPE_ATTR_BITFIELD32_MASK: valid mask for the * bitfield32 type (U32) + * @NL_POLICY_TYPE_ATTR_MASK: mask of valid bits for unsigned integers (U64) * @NL_POLICY_TYPE_ATTR_PAD: pad attribute for 64-bit alignment */ enum netlink_policy_type_attr { @@ -346,6 +349,7 @@ enum netlink_policy_type_attr { NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE, NL_POLICY_TYPE_ATTR_BITFIELD32_MASK, NL_POLICY_TYPE_ATTR_PAD, + NL_POLICY_TYPE_ATTR_MASK, /* keep last */ __NL_POLICY_TYPE_ATTR_MAX, diff --git a/include/uapi/linux/nitro_enclaves.h b/include/uapi/linux/nitro_enclaves.h new file mode 100644 index 000000000000..b945073fe544 --- /dev/null +++ b/include/uapi/linux/nitro_enclaves.h @@ -0,0 +1,359 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + */ + +#ifndef _UAPI_LINUX_NITRO_ENCLAVES_H_ +#define _UAPI_LINUX_NITRO_ENCLAVES_H_ + +#include <linux/types.h> + +/** + * DOC: Nitro Enclaves (NE) Kernel Driver Interface + */ + +/** + * NE_CREATE_VM - The command is used to create a slot that is associated with + * an enclave VM. + * The generated unique slot id is an output parameter. + * The ioctl can be invoked on the /dev/nitro_enclaves fd, before + * setting any resources, such as memory and vCPUs, for an + * enclave. Memory and vCPUs are set for the slot mapped to an enclave. + * A NE CPU pool has to be set before calling this function. The + * pool can be set after the NE driver load, using + * /sys/module/nitro_enclaves/parameters/ne_cpus. + * Its format is the detailed in the cpu-lists section: + * https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html + * CPU 0 and its siblings have to remain available for the + * primary / parent VM, so they cannot be set for enclaves. Full + * CPU core(s), from the same NUMA node, need(s) to be included + * in the CPU pool. + * + * Context: Process context. + * Return: + * * Enclave file descriptor - Enclave file descriptor used with + * ioctl calls to set vCPUs and memory + * regions, then start the enclave. + * * -1 - There was a failure in the ioctl logic. + * On failure, errno is set to: + * * EFAULT - copy_to_user() failure. + * * ENOMEM - Memory allocation failure for internal + * bookkeeping variables. + * * NE_ERR_NO_CPUS_AVAIL_IN_POOL - No NE CPU pool set / no CPUs available + * in the pool. + * * Error codes from get_unused_fd_flags() and anon_inode_getfile(). + * * Error codes from the NE PCI device request. + */ +#define NE_CREATE_VM _IOR(0xAE, 0x20, __u64) + +/** + * NE_ADD_VCPU - The command is used to set a vCPU for an enclave. The vCPU can + * be auto-chosen from the NE CPU pool or it can be set by the + * caller, with the note that it needs to be available in the NE + * CPU pool. Full CPU core(s), from the same NUMA node, need(s) to + * be associated with an enclave. + * The vCPU id is an input / output parameter. If its value is 0, + * then a CPU is chosen from the enclave CPU pool and returned via + * this parameter. + * The ioctl can be invoked on the enclave fd, before an enclave + * is started. + * + * Context: Process context. + * Return: + * * 0 - Logic succesfully completed. + * * -1 - There was a failure in the ioctl logic. + * On failure, errno is set to: + * * EFAULT - copy_from_user() / copy_to_user() failure. + * * ENOMEM - Memory allocation failure for internal + * bookkeeping variables. + * * EIO - Current task mm is not the same as the one + * that created the enclave. + * * NE_ERR_NO_CPUS_AVAIL_IN_POOL - No CPUs available in the NE CPU pool. + * * NE_ERR_VCPU_ALREADY_USED - The provided vCPU is already used. + * * NE_ERR_VCPU_NOT_IN_CPU_POOL - The provided vCPU is not available in the + * NE CPU pool. + * * NE_ERR_VCPU_INVALID_CPU_CORE - The core id of the provided vCPU is invalid + * or out of range. + * * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state + * (init = before being started). + * * NE_ERR_INVALID_VCPU - The provided vCPU is not in the available + * CPUs range. + * * Error codes from the NE PCI device request. + */ +#define NE_ADD_VCPU _IOWR(0xAE, 0x21, __u32) + +/** + * NE_GET_IMAGE_LOAD_INFO - The command is used to get information needed for + * in-memory enclave image loading e.g. offset in + * enclave memory to start placing the enclave image. + * The image load info is an input / output parameter. + * It includes info provided by the caller - flags - + * and returns the offset in enclave memory where to + * start placing the enclave image. + * The ioctl can be invoked on the enclave fd, before + * an enclave is started. + * + * Context: Process context. + * Return: + * * 0 - Logic succesfully completed. + * * -1 - There was a failure in the ioctl logic. + * On failure, errno is set to: + * * EFAULT - copy_from_user() / copy_to_user() failure. + * * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state (init = + * before being started). + * * NE_ERR_INVALID_FLAG_VALUE - The value of the provided flag is invalid. + */ +#define NE_GET_IMAGE_LOAD_INFO _IOWR(0xAE, 0x22, struct ne_image_load_info) + +/** + * NE_SET_USER_MEMORY_REGION - The command is used to set a memory region for an + * enclave, given the allocated memory from the + * userspace. Enclave memory needs to be from the + * same NUMA node as the enclave CPUs. + * The user memory region is an input parameter. It + * includes info provided by the caller - flags, + * memory size and userspace address. + * The ioctl can be invoked on the enclave fd, + * before an enclave is started. + * + * Context: Process context. + * Return: + * * 0 - Logic succesfully completed. + * * -1 - There was a failure in the ioctl logic. + * On failure, errno is set to: + * * EFAULT - copy_from_user() failure. + * * EINVAL - Invalid physical memory region(s) e.g. + * unaligned address. + * * EIO - Current task mm is not the same as + * the one that created the enclave. + * * ENOMEM - Memory allocation failure for internal + * bookkeeping variables. + * * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state + * (init = before being started). + * * NE_ERR_INVALID_MEM_REGION_SIZE - The memory size of the region is not + * multiple of 2 MiB. + * * NE_ERR_INVALID_MEM_REGION_ADDR - Invalid user space address given. + * * NE_ERR_UNALIGNED_MEM_REGION_ADDR - Unaligned user space address given. + * * NE_ERR_MEM_REGION_ALREADY_USED - The memory region is already used. + * * NE_ERR_MEM_NOT_HUGE_PAGE - The memory region is not backed by + * huge pages. + * * NE_ERR_MEM_DIFFERENT_NUMA_NODE - The memory region is not from the same + * NUMA node as the CPUs. + * * NE_ERR_MEM_MAX_REGIONS - The number of memory regions set for + * the enclave reached maximum. + * * NE_ERR_INVALID_PAGE_SIZE - The memory region is not backed by + * pages multiple of 2 MiB. + * * NE_ERR_INVALID_FLAG_VALUE - The value of the provided flag is invalid. + * * Error codes from get_user_pages(). + * * Error codes from the NE PCI device request. + */ +#define NE_SET_USER_MEMORY_REGION _IOW(0xAE, 0x23, struct ne_user_memory_region) + +/** + * NE_START_ENCLAVE - The command is used to trigger enclave start after the + * enclave resources, such as memory and CPU, have been set. + * The enclave start info is an input / output parameter. It + * includes info provided by the caller - enclave cid and + * flags - and returns the cid (if input cid is 0). + * The ioctl can be invoked on the enclave fd, after an + * enclave slot is created and resources, such as memory and + * vCPUs are set for an enclave. + * + * Context: Process context. + * Return: + * * 0 - Logic succesfully completed. + * * -1 - There was a failure in the ioctl logic. + * On failure, errno is set to: + * * EFAULT - copy_from_user() / copy_to_user() failure. + * * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state + * (init = before being started). + * * NE_ERR_NO_MEM_REGIONS_ADDED - No memory regions are set. + * * NE_ERR_NO_VCPUS_ADDED - No vCPUs are set. + * * NE_ERR_FULL_CORES_NOT_USED - Full core(s) not set for the enclave. + * * NE_ERR_ENCLAVE_MEM_MIN_SIZE - Enclave memory is less than minimum + * memory size (64 MiB). + * * NE_ERR_INVALID_FLAG_VALUE - The value of the provided flag is invalid. + * * NE_ERR_INVALID_ENCLAVE_CID - The provided enclave CID is invalid. + * * Error codes from the NE PCI device request. + */ +#define NE_START_ENCLAVE _IOWR(0xAE, 0x24, struct ne_enclave_start_info) + +/** + * DOC: NE specific error codes + */ + +/** + * NE_ERR_VCPU_ALREADY_USED - The provided vCPU is already used. + */ +#define NE_ERR_VCPU_ALREADY_USED (256) +/** + * NE_ERR_VCPU_NOT_IN_CPU_POOL - The provided vCPU is not available in the + * NE CPU pool. + */ +#define NE_ERR_VCPU_NOT_IN_CPU_POOL (257) +/** + * NE_ERR_VCPU_INVALID_CPU_CORE - The core id of the provided vCPU is invalid + * or out of range of the NE CPU pool. + */ +#define NE_ERR_VCPU_INVALID_CPU_CORE (258) +/** + * NE_ERR_INVALID_MEM_REGION_SIZE - The user space memory region size is not + * multiple of 2 MiB. + */ +#define NE_ERR_INVALID_MEM_REGION_SIZE (259) +/** + * NE_ERR_INVALID_MEM_REGION_ADDR - The user space memory region address range + * is invalid. + */ +#define NE_ERR_INVALID_MEM_REGION_ADDR (260) +/** + * NE_ERR_UNALIGNED_MEM_REGION_ADDR - The user space memory region address is + * not aligned. + */ +#define NE_ERR_UNALIGNED_MEM_REGION_ADDR (261) +/** + * NE_ERR_MEM_REGION_ALREADY_USED - The user space memory region is already used. + */ +#define NE_ERR_MEM_REGION_ALREADY_USED (262) +/** + * NE_ERR_MEM_NOT_HUGE_PAGE - The user space memory region is not backed by + * contiguous physical huge page(s). + */ +#define NE_ERR_MEM_NOT_HUGE_PAGE (263) +/** + * NE_ERR_MEM_DIFFERENT_NUMA_NODE - The user space memory region is backed by + * pages from different NUMA nodes than the CPUs. + */ +#define NE_ERR_MEM_DIFFERENT_NUMA_NODE (264) +/** + * NE_ERR_MEM_MAX_REGIONS - The supported max memory regions per enclaves has + * been reached. + */ +#define NE_ERR_MEM_MAX_REGIONS (265) +/** + * NE_ERR_NO_MEM_REGIONS_ADDED - The command to start an enclave is triggered + * and no memory regions are added. + */ +#define NE_ERR_NO_MEM_REGIONS_ADDED (266) +/** + * NE_ERR_NO_VCPUS_ADDED - The command to start an enclave is triggered and no + * vCPUs are added. + */ +#define NE_ERR_NO_VCPUS_ADDED (267) +/** + * NE_ERR_ENCLAVE_MEM_MIN_SIZE - The enclave memory size is lower than the + * minimum supported. + */ +#define NE_ERR_ENCLAVE_MEM_MIN_SIZE (268) +/** + * NE_ERR_FULL_CORES_NOT_USED - The command to start an enclave is triggered and + * full CPU cores are not set. + */ +#define NE_ERR_FULL_CORES_NOT_USED (269) +/** + * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state when setting + * resources or triggering start. + */ +#define NE_ERR_NOT_IN_INIT_STATE (270) +/** + * NE_ERR_INVALID_VCPU - The provided vCPU is out of range of the available CPUs. + */ +#define NE_ERR_INVALID_VCPU (271) +/** + * NE_ERR_NO_CPUS_AVAIL_IN_POOL - The command to create an enclave is triggered + * and no CPUs are available in the pool. + */ +#define NE_ERR_NO_CPUS_AVAIL_IN_POOL (272) +/** + * NE_ERR_INVALID_PAGE_SIZE - The user space memory region is not backed by pages + * multiple of 2 MiB. + */ +#define NE_ERR_INVALID_PAGE_SIZE (273) +/** + * NE_ERR_INVALID_FLAG_VALUE - The provided flag value is invalid. + */ +#define NE_ERR_INVALID_FLAG_VALUE (274) +/** + * NE_ERR_INVALID_ENCLAVE_CID - The provided enclave CID is invalid, either + * being a well-known value or the CID of the + * parent / primary VM. + */ +#define NE_ERR_INVALID_ENCLAVE_CID (275) + +/** + * DOC: Image load info flags + */ + +/** + * NE_EIF_IMAGE - Enclave Image Format (EIF) + */ +#define NE_EIF_IMAGE (0x01) + +#define NE_IMAGE_LOAD_MAX_FLAG_VAL (0x02) + +/** + * struct ne_image_load_info - Info necessary for in-memory enclave image + * loading (in / out). + * @flags: Flags to determine the enclave image type + * (e.g. Enclave Image Format - EIF) (in). + * @memory_offset: Offset in enclave memory where to start placing the + * enclave image (out). + */ +struct ne_image_load_info { + __u64 flags; + __u64 memory_offset; +}; + +/** + * DOC: User memory region flags + */ + +/** + * NE_DEFAULT_MEMORY_REGION - Memory region for enclave general usage. + */ +#define NE_DEFAULT_MEMORY_REGION (0x00) + +#define NE_MEMORY_REGION_MAX_FLAG_VAL (0x01) + +/** + * struct ne_user_memory_region - Memory region to be set for an enclave (in). + * @flags: Flags to determine the usage for the memory region (in). + * @memory_size: The size, in bytes, of the memory region to be set for + * an enclave (in). + * @userspace_addr: The start address of the userspace allocated memory of + * the memory region to set for an enclave (in). + */ +struct ne_user_memory_region { + __u64 flags; + __u64 memory_size; + __u64 userspace_addr; +}; + +/** + * DOC: Enclave start info flags + */ + +/** + * NE_ENCLAVE_PRODUCTION_MODE - Start enclave in production mode. + */ +#define NE_ENCLAVE_PRODUCTION_MODE (0x00) +/** + * NE_ENCLAVE_DEBUG_MODE - Start enclave in debug mode. + */ +#define NE_ENCLAVE_DEBUG_MODE (0x01) + +#define NE_ENCLAVE_START_MAX_FLAG_VAL (0x02) + +/** + * struct ne_enclave_start_info - Setup info necessary for enclave start (in / out). + * @flags: Flags for the enclave to start with (e.g. debug mode) (in). + * @enclave_cid: Context ID (CID) for the enclave vsock device. If 0 as + * input, the CID is autogenerated by the hypervisor and + * returned back as output by the driver (in / out). + */ +struct ne_enclave_start_info { + __u64 flags; + __u64 enclave_cid; +}; + +#endif /* _UAPI_LINUX_NITRO_ENCLAVES_H_ */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 631f3a997b3c..47700a2b9af9 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -252,9 +252,13 @@ * DOC: SAE authentication offload * * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they - * support offloading SAE authentication for WPA3-Personal networks. In - * %NL80211_CMD_CONNECT the password for SAE should be specified using - * %NL80211_ATTR_SAE_PASSWORD. + * support offloading SAE authentication for WPA3-Personal networks in station + * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by + * drivers indicating the offload support in AP mode. + * + * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in + * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode + * respectively. */ /** @@ -647,13 +651,9 @@ * authentication/association or not receiving a response from the AP. * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as * well to remain backwards compatible. - * When establishing a security association, drivers that support 4 way - * handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when - * the 4 way handshake is completed successfully. * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. - * When a security association was established with the new AP (e.g. if - * the FT protocol was used for roaming or the driver completed the 4 way - * handshake), this event should be followed by an + * When a security association was established on an 802.1X network using + * fast transition, this event should be followed by an * %NL80211_CMD_PORT_AUTHORIZED event. * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify * userspace that a connection was dropped by the AP or due to other @@ -1067,13 +1067,11 @@ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously * configured PMK for the authenticator address identified by * %NL80211_ATTR_MAC. - * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way - * handshake was completed successfully by the driver. The BSSID is - * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake - * offload should send this event after indicating 802.11 association with - * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed - * %NL80211_CMD_DISCONNECT should be indicated instead. - * + * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was + * completed successfully. Drivers that support 4 way handshake offload + * should send this event after indicating 802.1X FT assocation with + * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT + * should be indicated instead. * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request * and RX notification. This command is used both as a request to transmit * a control port frame and as a notification that a control port frame @@ -2082,10 +2080,10 @@ enum nl80211_commands { * operation). * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information * for the time while performing a channel switch. - * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel - * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). - * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel - * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). + * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel + * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel + * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP). * * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. * As specified in the &enum nl80211_rxmgmt_flags. @@ -2515,6 +2513,20 @@ enum nl80211_commands { * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from * association request when used with NL80211_CMD_NEW_STATION). * + * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS + * discovery. It is a nested attribute, see + * &enum nl80211_fils_discovery_attributes. + * + * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure + * unsolicited broadcast probe response. It is a nested attribute, see + * &enum nl80211_unsol_bcast_probe_resp_attributes. + * + * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element + * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in + * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2821,8 +2833,8 @@ enum nl80211_attrs { NL80211_ATTR_CH_SWITCH_COUNT, NL80211_ATTR_CH_SWITCH_BLOCK_TX, NL80211_ATTR_CSA_IES, - NL80211_ATTR_CSA_C_OFF_BEACON, - NL80211_ATTR_CSA_C_OFF_PRESP, + NL80211_ATTR_CNTDWN_OFFS_BEACON, + NL80211_ATTR_CNTDWN_OFFS_PRESP, NL80211_ATTR_RXMGMT_FLAGS, @@ -2997,6 +3009,13 @@ enum nl80211_attrs { NL80211_ATTR_HE_6GHZ_CAPABILITY, + NL80211_ATTR_FILS_DISCOVERY, + + NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, + + NL80211_ATTR_S1G_CAPABILITY, + NL80211_ATTR_S1G_CAPABILITY_MASK, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3009,6 +3028,8 @@ enum nl80211_attrs { #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA +#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON +#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP /* * Allow user space programs to use #ifdef on new attributes by defining them @@ -3187,6 +3208,18 @@ enum nl80211_he_gi { }; /** + * enum nl80211_he_ltf - HE long training field + * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec + * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec + * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec + */ +enum nl80211_he_ltf { + NL80211_RATE_INFO_HE_1XLTF, + NL80211_RATE_INFO_HE_2XLTF, + NL80211_RATE_INFO_HE_4XLTF, +}; + +/** * enum nl80211_he_ru_alloc - HE RU allocation values * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation @@ -3725,6 +3758,16 @@ enum nl80211_wmm_rule { * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel * in current regulatory domain. * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz + * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed + * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -3756,6 +3799,11 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_WMM, NL80211_FREQUENCY_ATTR_NO_HE, NL80211_FREQUENCY_ATTR_OFFSET, + NL80211_FREQUENCY_ATTR_1MHZ, + NL80211_FREQUENCY_ATTR_2MHZ, + NL80211_FREQUENCY_ATTR_4MHZ, + NL80211_FREQUENCY_ATTR_8MHZ, + NL80211_FREQUENCY_ATTR_16MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4049,6 +4097,7 @@ enum nl80211_user_reg_hint_type { * receiving frames destined to the local BSS * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number * currently defined + * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use */ enum nl80211_survey_info { @@ -4064,6 +4113,7 @@ enum nl80211_survey_info { NL80211_SURVEY_INFO_TIME_SCAN, NL80211_SURVEY_INFO_PAD, NL80211_SURVEY_INFO_TIME_BSS_RX, + NL80211_SURVEY_INFO_FREQUENCY_OFFSET, /* keep last */ __NL80211_SURVEY_INFO_AFTER_LAST, @@ -4741,6 +4791,10 @@ enum nl80211_key_attributes { * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, * see &struct nl80211_txrate_vht * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi + * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection, + * see &struct nl80211_txrate_he + * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. + * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ @@ -4750,6 +4804,9 @@ enum nl80211_tx_rate_attributes { NL80211_TXRATE_HT, NL80211_TXRATE_VHT, NL80211_TXRATE_GI, + NL80211_TXRATE_HE, + NL80211_TXRATE_HE_GI, + NL80211_TXRATE_HE_LTF, /* keep last */ __NL80211_TXRATE_AFTER_LAST, @@ -4767,6 +4824,15 @@ struct nl80211_txrate_vht { __u16 mcs[NL80211_VHT_NSS_MAX]; }; +#define NL80211_HE_NSS_MAX 8 +/** + * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_he { + __u16 mcs[NL80211_HE_NSS_MAX]; +}; + enum nl80211_txrate_gi { NL80211_TXRATE_DEFAULT_GI, NL80211_TXRATE_FORCE_SGI, @@ -5821,6 +5887,15 @@ enum nl80211_feature_flags { * handshake with PSK in AP mode (PSK is passed as part of the start AP * command). * + * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication + * in AP mode (SAE password is passed as part of the start AP command). + * + * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery + * frames transmission + * + * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports + * unsolicited broadcast probe response transmission + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5878,6 +5953,9 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK, + NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, + NL80211_EXT_FEATURE_FILS_DISCOVERY, + NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -5992,6 +6070,8 @@ enum nl80211_timeout_reason { * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. + * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by + * 2.4/5 GHz APs */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -6008,6 +6088,7 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, + NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14, }; /** @@ -6910,6 +6991,13 @@ enum nl80211_peer_measurement_ftm_resp { * * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum + * tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color + * values used by members of the SRG. + * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial + * BSSID values used by members of the SRG. + * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element. * * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. @@ -6919,6 +7007,10 @@ enum nl80211_obss_pd_attributes { NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, + NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET, + NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP, + NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP, + NL80211_HE_OBSS_PD_ATTR_SR_CTRL, /* keep last */ __NL80211_HE_OBSS_PD_ATTR_LAST, @@ -6972,4 +7064,64 @@ enum nl80211_iftype_akm_attributes { NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, }; +/** + * enum nl80211_fils_discovery_attributes - FILS discovery configuration + * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail. + * + * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid + * + * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU). + * Allowed range: 0..10000 (TU = Time Unit) + * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU). + * Allowed range: 0..10000 (TU = Time Unit) + * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action + * frame including the headers. + * + * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal + * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute + */ +enum nl80211_fils_discovery_attributes { + __NL80211_FILS_DISCOVERY_ATTR_INVALID, + + NL80211_FILS_DISCOVERY_ATTR_INT_MIN, + NL80211_FILS_DISCOVERY_ATTR_INT_MAX, + NL80211_FILS_DISCOVERY_ATTR_TMPL, + + /* keep last */ + __NL80211_FILS_DISCOVERY_ATTR_LAST, + NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1 +}; + +/* + * FILS discovery template minimum length with action frame headers and + * mandatory fields. + */ +#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42 + +/** + * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe + * response configuration. Applicable only in 6GHz. + * + * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid + * + * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU). + * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0 + * 26.17.2.3.2 (AP behavior for fast passive scanning). + * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response + * frame template (binary). + * + * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal + * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute + */ +enum nl80211_unsol_bcast_probe_resp_attributes { + __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID, + + NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT, + NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL, + + /* keep last */ + __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST, + NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = + __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 +}; #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/pidfd.h b/include/uapi/linux/pidfd.h new file mode 100644 index 000000000000..5406fbc13074 --- /dev/null +++ b/include/uapi/linux/pidfd.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ + +#ifndef _UAPI_LINUX_PIDFD_H +#define _UAPI_LINUX_PIDFD_H + +#include <linux/types.h> +#include <linux/fcntl.h> + +/* Flags for pidfd_open(). */ +#define PIDFD_NONBLOCK O_NONBLOCK + +#endif /* _UAPI_LINUX_PIDFD_H */ diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 07b4f8131e36..7f0827705c9a 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -233,6 +233,15 @@ struct prctl_mm_map { #define PR_SET_TAGGED_ADDR_CTRL 55 #define PR_GET_TAGGED_ADDR_CTRL 56 # define PR_TAGGED_ADDR_ENABLE (1UL << 0) +/* MTE tag check fault modes */ +# define PR_MTE_TCF_SHIFT 1 +# define PR_MTE_TCF_NONE (0UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_SYNC (1UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_ASYNC (2UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_MASK (3UL << PR_MTE_TCF_SHIFT) +/* MTE tag inclusion mask */ +# define PR_MTE_TAG_SHIFT 3 +# define PR_MTE_TAG_MASK (0xffffUL << PR_MTE_TAG_SHIFT) /* Control reclaim behavior when allocating memory */ #define PR_SET_IO_FLUSHER 57 diff --git a/include/uapi/linux/rxrpc.h b/include/uapi/linux/rxrpc.h index 4accfa7e266d..8f8dc7a937a4 100644 --- a/include/uapi/linux/rxrpc.h +++ b/include/uapi/linux/rxrpc.h @@ -51,11 +51,11 @@ enum rxrpc_cmsg_type { RXRPC_BUSY = 6, /* -r: server busy received [terminal] */ RXRPC_LOCAL_ERROR = 7, /* -r: local error generated [terminal] */ RXRPC_NEW_CALL = 8, /* -r: [Service] new incoming call notification */ - RXRPC_ACCEPT = 9, /* s-: [Service] accept request */ RXRPC_EXCLUSIVE_CALL = 10, /* s-: Call should be on exclusive connection */ RXRPC_UPGRADE_SERVICE = 11, /* s-: Request service upgrade for client call */ RXRPC_TX_LENGTH = 12, /* s-: Total length of Tx data */ RXRPC_SET_CALL_TIMEOUT = 13, /* s-: Set one or more call timeouts */ + RXRPC_CHARGE_ACCEPT = 14, /* s-: Charge the accept pool with a user call ID */ RXRPC__SUPPORTED }; diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index cee9f8e6fce3..f84e7bcad6de 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -288,6 +288,7 @@ enum LINUX_MIB_TCPTIMEOUTREHASH, /* TCPTimeoutRehash */ LINUX_MIB_TCPDUPLICATEDATAREHASH, /* TCPDuplicateDataRehash */ LINUX_MIB_TCPDSACKRECVSEGS, /* TCPDSACKRecvSegs */ + LINUX_MIB_TCPDSACKIGNOREDDUBIOUS, /* TCPDSACKIgnoredDubious */ __LINUX_MIB_MAX }; diff --git a/include/uapi/linux/tc_act/tc_mpls.h b/include/uapi/linux/tc_act/tc_mpls.h index 9360e95273c7..9e4e8f52a779 100644 --- a/include/uapi/linux/tc_act/tc_mpls.h +++ b/include/uapi/linux/tc_act/tc_mpls.h @@ -10,6 +10,7 @@ #define TCA_MPLS_ACT_PUSH 2 #define TCA_MPLS_ACT_MODIFY 3 #define TCA_MPLS_ACT_DEC_TTL 4 +#define TCA_MPLS_ACT_MAC_PUSH 5 struct tc_mpls { tc_gen; /* generic TC action fields. */ diff --git a/include/uapi/linux/tc_act/tc_vlan.h b/include/uapi/linux/tc_act/tc_vlan.h index 168995b54a70..5b306fe815cc 100644 --- a/include/uapi/linux/tc_act/tc_vlan.h +++ b/include/uapi/linux/tc_act/tc_vlan.h @@ -16,6 +16,8 @@ #define TCA_VLAN_ACT_POP 1 #define TCA_VLAN_ACT_PUSH 2 #define TCA_VLAN_ACT_MODIFY 3 +#define TCA_VLAN_ACT_POP_ETH 4 +#define TCA_VLAN_ACT_PUSH_ETH 5 struct tc_vlan { tc_gen; @@ -30,6 +32,8 @@ enum { TCA_VLAN_PUSH_VLAN_PROTOCOL, TCA_VLAN_PAD, TCA_VLAN_PUSH_VLAN_PRIORITY, + TCA_VLAN_PUSH_ETH_DST, + TCA_VLAN_PUSH_ETH_SRC, __TCA_VLAN_MAX, }; #define TCA_VLAN_MAX (__TCA_VLAN_MAX - 1) diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h index add01db1daef..80ea15e12113 100644 --- a/include/uapi/linux/tipc.h +++ b/include/uapi/linux/tipc.h @@ -254,6 +254,8 @@ static inline int tipc_aead_key_size(struct tipc_aead_key *key) return sizeof(*key) + key->keylen; } +#define TIPC_REKEYING_NOW (~0U) + /* The macros and functions below are deprecated: */ diff --git a/include/uapi/linux/tipc_netlink.h b/include/uapi/linux/tipc_netlink.h index dc0d23a50e69..d847dd671d79 100644 --- a/include/uapi/linux/tipc_netlink.h +++ b/include/uapi/linux/tipc_netlink.h @@ -165,6 +165,8 @@ enum { TIPC_NLA_NODE_UP, /* flag */ TIPC_NLA_NODE_ID, /* data */ TIPC_NLA_NODE_KEY, /* data */ + TIPC_NLA_NODE_KEY_MASTER, /* flag */ + TIPC_NLA_NODE_REKEYING, /* u32 */ __TIPC_NLA_NODE_MAX, TIPC_NLA_NODE_MAX = __TIPC_NLA_NODE_MAX - 1 diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 62271418c1be..a184c4939438 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -375,6 +375,7 @@ enum v4l2_mpeg_video_aspect { enum v4l2_mpeg_video_bitrate_mode { V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0, V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1, + V4L2_MPEG_VIDEO_BITRATE_MODE_CQ = 2, }; #define V4L2_CID_MPEG_VIDEO_BITRATE (V4L2_CID_MPEG_BASE+207) #define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (V4L2_CID_MPEG_BASE+208) @@ -650,6 +651,23 @@ enum v4l2_mpeg_video_vp9_profile { V4L2_MPEG_VIDEO_VP9_PROFILE_2 = 2, V4L2_MPEG_VIDEO_VP9_PROFILE_3 = 3, }; +#define V4L2_CID_MPEG_VIDEO_VP9_LEVEL (V4L2_CID_MPEG_BASE+513) +enum v4l2_mpeg_video_vp9_level { + V4L2_MPEG_VIDEO_VP9_LEVEL_1_0 = 0, + V4L2_MPEG_VIDEO_VP9_LEVEL_1_1 = 1, + V4L2_MPEG_VIDEO_VP9_LEVEL_2_0 = 2, + V4L2_MPEG_VIDEO_VP9_LEVEL_2_1 = 3, + V4L2_MPEG_VIDEO_VP9_LEVEL_3_0 = 4, + V4L2_MPEG_VIDEO_VP9_LEVEL_3_1 = 5, + V4L2_MPEG_VIDEO_VP9_LEVEL_4_0 = 6, + V4L2_MPEG_VIDEO_VP9_LEVEL_4_1 = 7, + V4L2_MPEG_VIDEO_VP9_LEVEL_5_0 = 8, + V4L2_MPEG_VIDEO_VP9_LEVEL_5_1 = 9, + V4L2_MPEG_VIDEO_VP9_LEVEL_5_2 = 10, + V4L2_MPEG_VIDEO_VP9_LEVEL_6_0 = 11, + V4L2_MPEG_VIDEO_VP9_LEVEL_6_1 = 12, + V4L2_MPEG_VIDEO_VP9_LEVEL_6_2 = 13, +}; /* CIDs for HEVC encoding. */ @@ -742,6 +760,13 @@ enum v4l2_cid_mpeg_video_hevc_size_of_length_field { #define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (V4L2_CID_MPEG_BASE + 642) #define V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (V4L2_CID_MPEG_BASE + 643) #define V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (V4L2_CID_MPEG_BASE + 644) +#define V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY (V4L2_CID_MPEG_BASE + 645) +#define V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE (V4L2_CID_MPEG_BASE + 646) +enum v4l2_mpeg_video_frame_skip_mode { + V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_DISABLED = 0, + V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1, + V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT = 2, +}; /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index 123a231001a8..903e67b16711 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -16,6 +16,8 @@ #include <linux/types.h> #include <linux/videodev2.h> +#define V4L2_MBUS_FRAMEFMT_SET_CSC 0x0001 + /** * struct v4l2_mbus_framefmt - frame format on the media bus * @width: image width @@ -24,8 +26,11 @@ * @field: used interlacing type (from enum v4l2_field) * @colorspace: colorspace of the data (from enum v4l2_colorspace) * @ycbcr_enc: YCbCr encoding of the data (from enum v4l2_ycbcr_encoding) + * @hsv_enc: HSV encoding of the data (from enum v4l2_hsv_encoding) * @quantization: quantization of the data (from enum v4l2_quantization) * @xfer_func: transfer function of the data (from enum v4l2_xfer_func) + * @flags: flags (V4L2_MBUS_FRAMEFMT_*) + * @reserved: reserved bytes that can be later used */ struct v4l2_mbus_framefmt { __u32 width; @@ -33,10 +38,16 @@ struct v4l2_mbus_framefmt { __u32 code; __u32 field; __u32 colorspace; - __u16 ycbcr_enc; + union { + /* enum v4l2_ycbcr_encoding */ + __u16 ycbcr_enc; + /* enum v4l2_hsv_encoding */ + __u16 hsv_enc; + }; __u16 quantization; __u16 xfer_func; - __u16 reserved[11]; + __u16 flags; + __u16 reserved[10]; }; #ifndef __KERNEL__ diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index 5d2a1dab7911..00850b98078a 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -65,19 +65,27 @@ struct v4l2_subdev_crop { __u32 reserved[8]; }; +#define V4L2_SUBDEV_MBUS_CODE_CSC_COLORSPACE 0x00000001 +#define V4L2_SUBDEV_MBUS_CODE_CSC_XFER_FUNC 0x00000002 +#define V4L2_SUBDEV_MBUS_CODE_CSC_YCBCR_ENC 0x00000004 +#define V4L2_SUBDEV_MBUS_CODE_CSC_HSV_ENC V4L2_SUBDEV_MBUS_CODE_CSC_YCBCR_ENC +#define V4L2_SUBDEV_MBUS_CODE_CSC_QUANTIZATION 0x00000008 + /** * struct v4l2_subdev_mbus_code_enum - Media bus format enumeration * @pad: pad number, as reported by the media API * @index: format index during enumeration * @code: format code (MEDIA_BUS_FMT_ definitions) * @which: format type (from enum v4l2_subdev_format_whence) + * @flags: flags set by the driver, (V4L2_SUBDEV_MBUS_CODE_*) */ struct v4l2_subdev_mbus_code_enum { __u32 pad; __u32 index; __u32 code; __u32 which; - __u32 reserved[8]; + __u32 flags; + __u32 reserved[7]; }; /** diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index c7b70ff53bc1..534eaa4d39bc 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -191,8 +191,6 @@ enum v4l2_memory { V4L2_MEMORY_DMABUF = 4, }; -#define V4L2_FLAG_MEMORY_NON_CONSISTENT (1 << 0) - /* see also http://vektor.theorem.ca/graphics/ycbcr/ */ enum v4l2_colorspace { /* @@ -375,9 +373,9 @@ enum v4l2_hsv_encoding { enum v4l2_quantization { /* - * The default for R'G'B' quantization is always full range, except - * for the BT2020 colorspace. For Y'CbCr the quantization is always - * limited range, except for COLORSPACE_JPEG: this is full range. + * The default for R'G'B' quantization is always full range. + * For Y'CbCr the quantization is always limited range, except + * for COLORSPACE_JPEG: this is full range. */ V4L2_QUANTIZATION_DEFAULT = 0, V4L2_QUANTIZATION_FULL_RANGE = 1, @@ -386,14 +384,13 @@ enum v4l2_quantization { /* * Determine how QUANTIZATION_DEFAULT should map to a proper quantization. - * This depends on whether the image is RGB or not, the colorspace and the - * Y'CbCr encoding. + * This depends on whether the image is RGB or not, the colorspace. + * The Y'CbCr encoding is not used anymore, but is still there for backwards + * compatibility. */ #define V4L2_MAP_QUANTIZATION_DEFAULT(is_rgb_or_hsv, colsp, ycbcr_enc) \ - (((is_rgb_or_hsv) && (colsp) == V4L2_COLORSPACE_BT2020) ? \ - V4L2_QUANTIZATION_LIM_RANGE : \ - (((is_rgb_or_hsv) || (colsp) == V4L2_COLORSPACE_JPEG) ? \ - V4L2_QUANTIZATION_FULL_RANGE : V4L2_QUANTIZATION_LIM_RANGE)) + (((is_rgb_or_hsv) || (colsp) == V4L2_COLORSPACE_JPEG) ? \ + V4L2_QUANTIZATION_FULL_RANGE : V4L2_QUANTIZATION_LIM_RANGE) /* * Deprecated names for opRGB colorspace (IEC 61966-2-5) @@ -778,6 +775,7 @@ struct v4l2_pix_format { /* Flags */ #define V4L2_PIX_FMT_FLAG_PREMUL_ALPHA 0x00000001 +#define V4L2_PIX_FMT_FLAG_SET_CSC 0x00000002 /* * F O R M A T E N U M E R A T I O N @@ -797,6 +795,11 @@ struct v4l2_fmtdesc { #define V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM 0x0004 #define V4L2_FMT_FLAG_DYN_RESOLUTION 0x0008 #define V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL 0x0010 +#define V4L2_FMT_FLAG_CSC_COLORSPACE 0x0020 +#define V4L2_FMT_FLAG_CSC_XFER_FUNC 0x0040 +#define V4L2_FMT_FLAG_CSC_YCBCR_ENC 0x0080 +#define V4L2_FMT_FLAG_CSC_HSV_ENC V4L2_FMT_FLAG_CSC_YCBCR_ENC +#define V4L2_FMT_FLAG_CSC_QUANTIZATION 0x0100 /* Frame Size and frame rate enumeration */ /* @@ -949,10 +952,7 @@ struct v4l2_requestbuffers { __u32 type; /* enum v4l2_buf_type */ __u32 memory; /* enum v4l2_memory */ __u32 capabilities; - union { - __u32 flags; - __u32 reserved[1]; - }; + __u32 reserved[1]; }; /* capabilities for struct v4l2_requestbuffers and v4l2_create_buffers */ @@ -2456,9 +2456,6 @@ struct v4l2_dbg_chip_info { * @memory: enum v4l2_memory; buffer memory type * @format: frame format, for which buffers are requested * @capabilities: capabilities of this buffer type. - * @flags: additional buffer management attributes (ignored unless the - * queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability - * and configured for MMAP streaming I/O). * @reserved: future extensions */ struct v4l2_create_buffers { @@ -2467,8 +2464,7 @@ struct v4l2_create_buffers { __u32 memory; struct v4l2_format format; __u32 capabilities; - __u32 flags; - __u32 reserved[6]; + __u32 reserved[7]; }; /* diff --git a/include/uapi/linux/virtio_gpu.h b/include/uapi/linux/virtio_gpu.h index ccbd174ef321..747a5c5cc4e6 100644 --- a/include/uapi/linux/virtio_gpu.h +++ b/include/uapi/linux/virtio_gpu.h @@ -50,6 +50,10 @@ * VIRTIO_GPU_CMD_GET_EDID */ #define VIRTIO_GPU_F_EDID 1 +/* + * VIRTIO_GPU_CMD_RESOURCE_ASSIGN_UUID + */ +#define VIRTIO_GPU_F_RESOURCE_UUID 2 enum virtio_gpu_ctrl_type { VIRTIO_GPU_UNDEFINED = 0, @@ -66,6 +70,7 @@ enum virtio_gpu_ctrl_type { VIRTIO_GPU_CMD_GET_CAPSET_INFO, VIRTIO_GPU_CMD_GET_CAPSET, VIRTIO_GPU_CMD_GET_EDID, + VIRTIO_GPU_CMD_RESOURCE_ASSIGN_UUID, /* 3d commands */ VIRTIO_GPU_CMD_CTX_CREATE = 0x0200, @@ -87,6 +92,7 @@ enum virtio_gpu_ctrl_type { VIRTIO_GPU_RESP_OK_CAPSET_INFO, VIRTIO_GPU_RESP_OK_CAPSET, VIRTIO_GPU_RESP_OK_EDID, + VIRTIO_GPU_RESP_OK_RESOURCE_UUID, /* error responses */ VIRTIO_GPU_RESP_ERR_UNSPEC = 0x1200, @@ -340,4 +346,17 @@ enum virtio_gpu_formats { VIRTIO_GPU_FORMAT_R8G8B8X8_UNORM = 134, }; +/* VIRTIO_GPU_CMD_RESOURCE_ASSIGN_UUID */ +struct virtio_gpu_resource_assign_uuid { + struct virtio_gpu_ctrl_hdr hdr; + __le32 resource_id; + __le32 padding; +}; + +/* VIRTIO_GPU_RESP_OK_RESOURCE_UUID */ +struct virtio_gpu_resp_resource_uuid { + struct virtio_gpu_ctrl_hdr hdr; + __u8 uuid[16]; +}; + #endif diff --git a/include/uapi/misc/fastrpc.h b/include/uapi/misc/fastrpc.h index 07de2b7aac85..0a89f95463f6 100644 --- a/include/uapi/misc/fastrpc.h +++ b/include/uapi/misc/fastrpc.h @@ -10,8 +10,9 @@ #define FASTRPC_IOCTL_INVOKE _IOWR('R', 3, struct fastrpc_invoke) #define FASTRPC_IOCTL_INIT_ATTACH _IO('R', 4) #define FASTRPC_IOCTL_INIT_CREATE _IOWR('R', 5, struct fastrpc_init_create) -#define FASTRPC_IOCTL_MMAP _IOWR('R', 6, struct fastrpc_req_mmap) -#define FASTRPC_IOCTL_MUNMAP _IOWR('R', 7, struct fastrpc_req_munmap) +#define FASTRPC_IOCTL_MMAP _IOWR('R', 6, struct fastrpc_req_mmap) +#define FASTRPC_IOCTL_MUNMAP _IOWR('R', 7, struct fastrpc_req_munmap) +#define FASTRPC_IOCTL_INIT_ATTACH_SNS _IO('R', 8) struct fastrpc_invoke_args { __u64 ptr; diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h index d5c4f983b7a8..9705b8adb60c 100644 --- a/include/uapi/misc/habanalabs.h +++ b/include/uapi/misc/habanalabs.h @@ -264,6 +264,10 @@ enum hl_device_status { * HL_INFO_TIME_SYNC - Retrieve the device's time alongside the host's time * for synchronization. * HL_INFO_CS_COUNTERS - Retrieve command submission counters + * HL_INFO_PCI_COUNTERS - Retrieve PCI counters + * HL_INFO_CLK_THROTTLE_REASON - Retrieve clock throttling reason + * HL_INFO_SYNC_MANAGER - Retrieve sync manager info per dcore + * HL_INFO_TOTAL_ENERGY - Retrieve total energy consumption */ #define HL_INFO_HW_IP_INFO 0 #define HL_INFO_HW_EVENTS 1 @@ -276,6 +280,10 @@ enum hl_device_status { #define HL_INFO_RESET_COUNT 9 #define HL_INFO_TIME_SYNC 10 #define HL_INFO_CS_COUNTERS 11 +#define HL_INFO_PCI_COUNTERS 12 +#define HL_INFO_CLK_THROTTLE_REASON 13 +#define HL_INFO_SYNC_MANAGER 14 +#define HL_INFO_TOTAL_ENERGY 15 #define HL_INFO_VERSION_MAX_LEN 128 #define HL_INFO_CARD_NAME_MAX_LEN 16 @@ -289,7 +297,7 @@ struct hl_info_hw_ip_info { __u32 device_id; /* PCI Device ID */ __u32 module_id; /* For mezzanine cards in servers (From OCP spec.) */ __u32 reserved[2]; - __u32 armcp_cpld_version; + __u32 cpld_version; __u32 psoc_pci_pll_nr; __u32 psoc_pci_pll_nf; __u32 psoc_pci_pll_od; @@ -297,7 +305,7 @@ struct hl_info_hw_ip_info { __u8 tpc_enabled_mask; __u8 dram_enabled; __u8 pad[2]; - __u8 armcp_version[HL_INFO_VERSION_MAX_LEN]; + __u8 cpucp_version[HL_INFO_VERSION_MAX_LEN]; __u8 card_name[HL_INFO_CARD_NAME_MAX_LEN]; }; @@ -313,6 +321,12 @@ struct hl_info_hw_idle { * Bits definition is according to `enum <chip>_enging_id'. */ __u32 busy_engines_mask; + + /* + * Extended Bitmask of busy engines. + * Bits definition is according to `enum <chip>_enging_id'. + */ + __u64 busy_engines_mask_ext; }; struct hl_info_device_status { @@ -341,17 +355,60 @@ struct hl_info_time_sync { }; /** + * struct hl_info_pci_counters - pci counters + * @rx_throughput: PCI rx throughput KBps + * @tx_throughput: PCI tx throughput KBps + * @replay_cnt: PCI replay counter + */ +struct hl_info_pci_counters { + __u64 rx_throughput; + __u64 tx_throughput; + __u64 replay_cnt; +}; + +#define HL_CLK_THROTTLE_POWER 0x1 +#define HL_CLK_THROTTLE_THERMAL 0x2 + +/** + * struct hl_info_clk_throttle - clock throttling reason + * @clk_throttling_reason: each bit represents a clk throttling reason + */ +struct hl_info_clk_throttle { + __u32 clk_throttling_reason; +}; + +/** + * struct hl_info_energy - device energy information + * @total_energy_consumption: total device energy consumption + */ +struct hl_info_energy { + __u64 total_energy_consumption; +}; + +/** + * struct hl_info_sync_manager - sync manager information + * @first_available_sync_object: first available sob + * @first_available_monitor: first available monitor + */ +struct hl_info_sync_manager { + __u32 first_available_sync_object; + __u32 first_available_monitor; +}; + +/** * struct hl_info_cs_counters - command submission counters * @out_of_mem_drop_cnt: dropped due to memory allocation issue * @parsing_drop_cnt: dropped due to error in packet parsing * @queue_full_drop_cnt: dropped due to queue full * @device_in_reset_drop_cnt: dropped due to device in reset + * @max_cs_in_flight_drop_cnt: dropped due to maximum CS in-flight */ struct hl_cs_counters { __u64 out_of_mem_drop_cnt; __u64 parsing_drop_cnt; __u64 queue_full_drop_cnt; __u64 device_in_reset_drop_cnt; + __u64 max_cs_in_flight_drop_cnt; }; struct hl_info_cs_counters { @@ -359,6 +416,13 @@ struct hl_info_cs_counters { struct hl_cs_counters ctx_cs_counters; }; +enum gaudi_dcores { + HL_GAUDI_WS_DCORE, + HL_GAUDI_WN_DCORE, + HL_GAUDI_EN_DCORE, + HL_GAUDI_ES_DCORE +}; + struct hl_info_args { /* Location of relevant struct in userspace */ __u64 return_pointer; @@ -375,6 +439,10 @@ struct hl_info_args { __u32 op; union { + /* Dcore id for which the information is relevant. + * For Gaudi refer to 'enum gaudi_dcores' + */ + __u32 dcore_id; /* Context ID - Currently not in use */ __u32 ctx_id; /* Period value for utilization rate (100ms - 1000ms, in 100ms @@ -394,6 +462,9 @@ struct hl_info_args { /* 2MB minus 32 bytes for 2xMSG_PROT */ #define HL_MAX_CB_SIZE (0x200000 - 32) +/* Indicates whether the command buffer should be mapped to the device's MMU */ +#define HL_CB_FLAGS_MAP 0x1 + struct hl_cb_in { /* Handle of CB or 0 if we want to create one */ __u64 cb_handle; @@ -405,7 +476,8 @@ struct hl_cb_in { __u32 cb_size; /* Context ID - Currently not in use */ __u32 ctx_id; - __u32 pad; + /* HL_CB_FLAGS_* */ + __u32 flags; }; struct hl_cb_out { @@ -788,6 +860,12 @@ struct hl_debug_args { * When creating a new CB, the IOCTL returns a handle of it, and the user-space * process needs to use that handle to mmap the buffer so it can access them. * + * In some instances, the device must access the command buffer through the + * device's MMU, and thus its memory should be mapped. In these cases, user can + * indicate the driver that such a mapping is required. + * The resulting device virtual address will be used internally by the driver, + * and won't be returned to user. + * */ #define HL_IOCTL_CB \ _IOWR('H', 0x02, union hl_cb_args) @@ -846,6 +924,9 @@ struct hl_debug_args { * inside the kernel until the CS has finished or until the user-requested * timeout has expired. * + * If the timeout value is 0, the driver won't sleep at all. It will check + * the status of the CS and return immediately + * * The return value of the IOCTL is a standard Linux error code. The possible * values are: * diff --git a/include/uapi/rdma/efa-abi.h b/include/uapi/rdma/efa-abi.h index 507a2862bedb..f89fbb5b1e8d 100644 --- a/include/uapi/rdma/efa-abi.h +++ b/include/uapi/rdma/efa-abi.h @@ -105,6 +105,7 @@ struct efa_ibv_create_ah_resp { enum { EFA_QUERY_DEVICE_CAPS_RDMA_READ = 1 << 0, + EFA_QUERY_DEVICE_CAPS_RNR_RETRY = 1 << 1, }; struct efa_ibv_ex_query_device_resp { diff --git a/include/uapi/rdma/hns-abi.h b/include/uapi/rdma/hns-abi.h index eb76b38a00d4..9ec85f76e9ac 100644 --- a/include/uapi/rdma/hns-abi.h +++ b/include/uapi/rdma/hns-abi.h @@ -39,6 +39,8 @@ struct hns_roce_ib_create_cq { __aligned_u64 buf_addr; __aligned_u64 db_addr; + __u32 cqe_size; + __u32 reserved; }; struct hns_roce_ib_create_cq_resp { @@ -73,7 +75,7 @@ struct hns_roce_ib_create_qp_resp { struct hns_roce_ib_alloc_ucontext_resp { __u32 qp_tab_size; - __u32 reserved; + __u32 cqe_size; }; struct hns_roce_ib_alloc_pd_resp { diff --git a/include/uapi/rdma/ib_user_ioctl_cmds.h b/include/uapi/rdma/ib_user_ioctl_cmds.h index 99dcabf61a71..7968a1845355 100644 --- a/include/uapi/rdma/ib_user_ioctl_cmds.h +++ b/include/uapi/rdma/ib_user_ioctl_cmds.h @@ -70,6 +70,8 @@ enum uverbs_methods_device { UVERBS_METHOD_QUERY_PORT, UVERBS_METHOD_GET_CONTEXT, UVERBS_METHOD_QUERY_CONTEXT, + UVERBS_METHOD_QUERY_GID_TABLE, + UVERBS_METHOD_QUERY_GID_ENTRY, }; enum uverbs_attrs_invoke_write_cmd_attr_ids { @@ -352,4 +354,18 @@ enum uverbs_attrs_async_event_create { UVERBS_ATTR_ASYNC_EVENT_ALLOC_FD_HANDLE, }; +enum uverbs_attrs_query_gid_table_cmd_attr_ids { + UVERBS_ATTR_QUERY_GID_TABLE_ENTRY_SIZE, + UVERBS_ATTR_QUERY_GID_TABLE_FLAGS, + UVERBS_ATTR_QUERY_GID_TABLE_RESP_ENTRIES, + UVERBS_ATTR_QUERY_GID_TABLE_RESP_NUM_ENTRIES, +}; + +enum uverbs_attrs_query_gid_entry_cmd_attr_ids { + UVERBS_ATTR_QUERY_GID_ENTRY_PORT, + UVERBS_ATTR_QUERY_GID_ENTRY_GID_INDEX, + UVERBS_ATTR_QUERY_GID_ENTRY_FLAGS, + UVERBS_ATTR_QUERY_GID_ENTRY_RESP_ENTRY, +}; + #endif diff --git a/include/uapi/rdma/ib_user_ioctl_verbs.h b/include/uapi/rdma/ib_user_ioctl_verbs.h index 5debab45ebcb..22483799cd07 100644 --- a/include/uapi/rdma/ib_user_ioctl_verbs.h +++ b/include/uapi/rdma/ib_user_ioctl_verbs.h @@ -208,6 +208,7 @@ enum ib_uverbs_read_counters_flags { enum ib_uverbs_advise_mr_advice { IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH, IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH_WRITE, + IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH_NO_FAULT, }; enum ib_uverbs_advise_mr_flag { @@ -250,4 +251,18 @@ enum rdma_driver_id { RDMA_DRIVER_SIW, }; +enum ib_uverbs_gid_type { + IB_UVERBS_GID_TYPE_IB, + IB_UVERBS_GID_TYPE_ROCE_V1, + IB_UVERBS_GID_TYPE_ROCE_V2, +}; + +struct ib_uverbs_gid_entry { + __aligned_u64 gid[2]; + __u32 gid_index; + __u32 port_num; + __u32 gid_type; + __u32 netdev_ifindex; /* It is 0 if there is no netdev associated with it */ +}; + #endif diff --git a/include/uapi/rdma/ib_user_verbs.h b/include/uapi/rdma/ib_user_verbs.h index 0474c7400268..456438c18c2c 100644 --- a/include/uapi/rdma/ib_user_verbs.h +++ b/include/uapi/rdma/ib_user_verbs.h @@ -457,6 +457,17 @@ struct ib_uverbs_poll_cq { __u32 ne; }; +enum ib_uverbs_wc_opcode { + IB_UVERBS_WC_SEND = 0, + IB_UVERBS_WC_RDMA_WRITE = 1, + IB_UVERBS_WC_RDMA_READ = 2, + IB_UVERBS_WC_COMP_SWAP = 3, + IB_UVERBS_WC_FETCH_ADD = 4, + IB_UVERBS_WC_BIND_MW = 5, + IB_UVERBS_WC_LOCAL_INV = 6, + IB_UVERBS_WC_TSO = 7, +}; + struct ib_uverbs_wc { __aligned_u64 wr_id; __u32 status; diff --git a/include/uapi/rdma/rdma_user_rxe.h b/include/uapi/rdma/rdma_user_rxe.h index aae2e696bb38..e591d8c1f3cf 100644 --- a/include/uapi/rdma/rdma_user_rxe.h +++ b/include/uapi/rdma/rdma_user_rxe.h @@ -39,6 +39,11 @@ #include <linux/in.h> #include <linux/in6.h> +enum { + RXE_NETWORK_TYPE_IPV4 = 1, + RXE_NETWORK_TYPE_IPV6 = 2, +}; + union rxe_gid { __u8 raw[16]; struct { @@ -57,6 +62,7 @@ struct rxe_global_route { struct rxe_av { __u8 port_num; + /* From RXE_NETWORK_TYPE_* */ __u8 network_type; __u8 dmac[6]; struct rxe_global_route grh; @@ -99,8 +105,8 @@ struct rxe_send_wr { struct ib_mr *mr; __aligned_u64 reserved; }; - __u32 key; - __u32 access; + __u32 key; + __u32 access; } reg; } wr; }; @@ -112,7 +118,7 @@ struct rxe_sge { }; struct mminfo { - __aligned_u64 offset; + __aligned_u64 offset; __u32 size; __u32 pad; }; diff --git a/include/uapi/sound/sof/abi.h b/include/uapi/sound/sof/abi.h index d54be303090f..6af32f82fb99 100644 --- a/include/uapi/sound/sof/abi.h +++ b/include/uapi/sound/sof/abi.h @@ -26,7 +26,7 @@ /* SOF ABI version major, minor and patch numbers */ #define SOF_ABI_MAJOR 3 -#define SOF_ABI_MINOR 16 +#define SOF_ABI_MINOR 17 #define SOF_ABI_PATCH 0 /* SOF ABI version number. Format within 32bit word is MMmmmppp */ diff --git a/include/uapi/sound/sof/tokens.h b/include/uapi/sound/sof/tokens.h index 5941e2eb1588..a642bf30c027 100644 --- a/include/uapi/sound/sof/tokens.h +++ b/include/uapi/sound/sof/tokens.h @@ -24,6 +24,9 @@ #define SOF_TPLG_KCTL_ENUM_ID 257 #define SOF_TPLG_KCTL_BYTES_ID 258 #define SOF_TPLG_KCTL_SWITCH_ID 259 +#define SOF_TPLG_KCTL_BYTES_VOLATILE_RO 260 +#define SOF_TPLG_KCTL_BYTES_VOLATILE_RW 261 +#define SOF_TPLG_KCTL_BYTES_WO_ID 262 /* * Tokens - must match values in topology configurations @@ -73,6 +76,8 @@ /* Token retired with ABI 3.2, do not use for new capabilities * #define SOF_TKN_COMP_PRELOAD_COUNT 403 */ +#define SOF_TKN_COMP_CORE_ID 404 +#define SOF_TKN_COMP_UUID 405 /* SSP */ #define SOF_TKN_INTEL_SSP_CLKS_CONTROL 500 |