diff options
Diffstat (limited to 'include/uapi')
| -rw-r--r-- | include/uapi/linux/android/binder.h | 28 | ||||
| -rw-r--r-- | include/uapi/linux/capability.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/cec.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/cyclades.h | 494 | ||||
| -rw-r--r-- | include/uapi/linux/elf.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/idxd.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/iio/buffer.h | 10 | ||||
| -rw-r--r-- | include/uapi/linux/major.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/map_to_7segment.h | 14 | ||||
| -rw-r--r-- | include/uapi/linux/nfsd/nfsfh.h | 27 | ||||
| -rw-r--r-- | include/uapi/linux/prctl.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/rkisp1-config.h | 16 | ||||
| -rw-r--r-- | include/uapi/linux/serial.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/surface_aggregator/dtx.h | 146 | ||||
| -rw-r--r-- | include/uapi/linux/tty_flags.h | 8 | ||||
| -rw-r--r-- | include/uapi/linux/usb/video.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/uvcvideo.h | 10 | ||||
| -rw-r--r-- | include/uapi/linux/v4l2-controls.h | 241 | ||||
| -rw-r--r-- | include/uapi/linux/v4l2-subdev.h | 12 | ||||
| -rw-r--r-- | include/uapi/linux/videodev2.h | 23 | ||||
| -rw-r--r-- | include/uapi/misc/habanalabs.h | 77 | ||||
| -rw-r--r-- | include/uapi/misc/uacce/hisi_qm.h | 1 | ||||
| -rw-r--r-- | include/uapi/mtd/mtd-abi.h | 2 |
23 files changed, 568 insertions, 565 deletions
diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h index ec84ad106568..20e435fe657a 100644 --- a/include/uapi/linux/android/binder.h +++ b/include/uapi/linux/android/binder.h @@ -217,6 +217,18 @@ struct binder_node_info_for_ref { __u32 reserved3; }; +struct binder_freeze_info { + __u32 pid; + __u32 enable; + __u32 timeout_ms; +}; + +struct binder_frozen_status_info { + __u32 pid; + __u32 sync_recv; + __u32 async_recv; +}; + #define BINDER_WRITE_READ _IOWR('b', 1, struct binder_write_read) #define BINDER_SET_IDLE_TIMEOUT _IOW('b', 3, __s64) #define BINDER_SET_MAX_THREADS _IOW('b', 5, __u32) @@ -227,6 +239,9 @@ struct binder_node_info_for_ref { #define BINDER_GET_NODE_DEBUG_INFO _IOWR('b', 11, struct binder_node_debug_info) #define BINDER_GET_NODE_INFO_FOR_REF _IOWR('b', 12, struct binder_node_info_for_ref) #define BINDER_SET_CONTEXT_MGR_EXT _IOW('b', 13, struct flat_binder_object) +#define BINDER_FREEZE _IOW('b', 14, struct binder_freeze_info) +#define BINDER_GET_FROZEN_INFO _IOWR('b', 15, struct binder_frozen_status_info) +#define BINDER_ENABLE_ONEWAY_SPAM_DETECTION _IOW('b', 16, __u32) /* * NOTE: Two special error codes you should check for when calling @@ -408,6 +423,19 @@ enum binder_driver_return_protocol { * The last transaction (either a bcTRANSACTION or * a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters. */ + + BR_FROZEN_REPLY = _IO('r', 18), + /* + * The target of the last transaction (either a bcTRANSACTION or + * a bcATTEMPT_ACQUIRE) is frozen. No parameters. + */ + + BR_ONEWAY_SPAM_SUSPECT = _IO('r', 19), + /* + * Current process sent too many oneway calls to target, and the last + * asynchronous transaction makes the allocated async buffer size exceed + * detection threshold. No parameters. + */ }; enum binder_driver_command_protocol { diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h index c6ca33034147..2ddb4226cd23 100644 --- a/include/uapi/linux/capability.h +++ b/include/uapi/linux/capability.h @@ -335,7 +335,8 @@ struct vfs_ns_cap_data { #define CAP_AUDIT_CONTROL 30 -/* Set or remove capabilities on files */ +/* Set or remove capabilities on files. + Map uid=0 into a child user namespace. */ #define CAP_SETFCAP 31 diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h index 7d1a06c52469..dc8879d179fd 100644 --- a/include/uapi/linux/cec.h +++ b/include/uapi/linux/cec.h @@ -396,6 +396,7 @@ struct cec_drm_connector_info { * associated with the CEC adapter. * @type: connector type (if any) * @drm: drm connector info + * @raw: array to pad the union */ struct cec_connector_info { __u32 type; @@ -453,7 +454,7 @@ struct cec_event_lost_msgs { * struct cec_event - CEC event structure * @ts: the timestamp of when the event was sent. * @event: the event. - * array. + * @flags: event flags. * @state_change: the event payload for CEC_EVENT_STATE_CHANGE. * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS. * @raw: array to pad the union. diff --git a/include/uapi/linux/cyclades.h b/include/uapi/linux/cyclades.h deleted file mode 100644 index fc0add2194a9..000000000000 --- a/include/uapi/linux/cyclades.h +++ /dev/null @@ -1,494 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ - * linux/include/linux/cyclades.h - * - * This file was initially written by - * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by - * Ivan Passos <ivan@cyclades.com>. - * - * This file contains the general definitions for the cyclades.c driver - *$Log: cyclades.h,v $ - *Revision 3.1 2002/01/29 11:36:16 henrique - *added throttle field on struct cyclades_port to indicate whether the - *port is throttled or not - * - *Revision 3.1 2000/04/19 18:52:52 ivan - *converted address fields to unsigned long and added fields for physical - *addresses on cyclades_card structure; - * - *Revision 3.0 1998/11/02 14:20:59 ivan - *added nports field on cyclades_card structure; - * - *Revision 2.5 1998/08/03 16:57:01 ivan - *added cyclades_idle_stats structure; - * - *Revision 2.4 1998/06/01 12:09:53 ivan - *removed closing_wait2 from cyclades_port structure; - * - *Revision 2.3 1998/03/16 18:01:12 ivan - *changes in the cyclades_port structure to get it closer to the - *standard serial port structure; - *added constants for new ioctls; - * - *Revision 2.2 1998/02/17 16:50:00 ivan - *changes in the cyclades_port structure (addition of shutdown_wait and - *chip_rev variables); - *added constants for new ioctls and for CD1400 rev. numbers. - * - *Revision 2.1 1997/10/24 16:03:00 ivan - *added rflow (which allows enabling the CD1400 special flow control - *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to - *cyclades_port structure; - *added Alpha support - * - *Revision 2.0 1997/06/30 10:30:00 ivan - *added some new doorbell command constants related to IOCTLW and - *UART error signaling - * - *Revision 1.8 1997/06/03 15:30:00 ivan - *added constant ZFIRM_HLT - *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin) - * - *Revision 1.7 1997/03/26 10:30:00 daniel - *new entries at the end of cyclades_port struct to reallocate - *variables illegally allocated within card memory. - * - *Revision 1.6 1996/09/09 18:35:30 bentson - *fold in changes for Cyclom-Z -- including structures for - *communicating with board as well modest changes to original - *structures to support new features. - * - *Revision 1.5 1995/11/13 21:13:31 bentson - *changes suggested by Michael Chastain <mec@duracef.shout.net> - *to support use of this file in non-kernel applications - * - * - */ - -#ifndef _UAPI_LINUX_CYCLADES_H -#define _UAPI_LINUX_CYCLADES_H - -#include <linux/types.h> - -struct cyclades_monitor { - unsigned long int_count; - unsigned long char_count; - unsigned long char_max; - unsigned long char_last; -}; - -/* - * These stats all reflect activity since the device was last initialized. - * (i.e., since the port was opened with no other processes already having it - * open) - */ -struct cyclades_idle_stats { - __kernel_old_time_t in_use; /* Time device has been in use (secs) */ - __kernel_old_time_t recv_idle; /* Time since last char received (secs) */ - __kernel_old_time_t xmit_idle; /* Time since last char transmitted (secs) */ - unsigned long recv_bytes; /* Bytes received */ - unsigned long xmit_bytes; /* Bytes transmitted */ - unsigned long overruns; /* Input overruns */ - unsigned long frame_errs; /* Input framing errors */ - unsigned long parity_errs; /* Input parity errors */ -}; - -#define CYCLADES_MAGIC 0x4359 - -#define CYGETMON 0x435901 -#define CYGETTHRESH 0x435902 -#define CYSETTHRESH 0x435903 -#define CYGETDEFTHRESH 0x435904 -#define CYSETDEFTHRESH 0x435905 -#define CYGETTIMEOUT 0x435906 -#define CYSETTIMEOUT 0x435907 -#define CYGETDEFTIMEOUT 0x435908 -#define CYSETDEFTIMEOUT 0x435909 -#define CYSETRFLOW 0x43590a -#define CYGETRFLOW 0x43590b -#define CYSETRTSDTR_INV 0x43590c -#define CYGETRTSDTR_INV 0x43590d -#define CYZSETPOLLCYCLE 0x43590e -#define CYZGETPOLLCYCLE 0x43590f -#define CYGETCD1400VER 0x435910 -#define CYSETWAIT 0x435912 -#define CYGETWAIT 0x435913 - -/*************** CYCLOM-Z ADDITIONS ***************/ - -#define CZIOC ('M' << 8) -#define CZ_NBOARDS (CZIOC|0xfa) -#define CZ_BOOT_START (CZIOC|0xfb) -#define CZ_BOOT_DATA (CZIOC|0xfc) -#define CZ_BOOT_END (CZIOC|0xfd) -#define CZ_TEST (CZIOC|0xfe) - -#define CZ_DEF_POLL (HZ/25) - -#define MAX_BOARD 4 /* Max number of boards */ -#define MAX_DEV 256 /* Max number of ports total */ -#define CYZ_MAX_SPEED 921600 - -#define CYZ_FIFO_SIZE 16 - -#define CYZ_BOOT_NWORDS 0x100 -struct CYZ_BOOT_CTRL { - unsigned short nboard; - int status[MAX_BOARD]; - int nchannel[MAX_BOARD]; - int fw_rev[MAX_BOARD]; - unsigned long offset; - unsigned long data[CYZ_BOOT_NWORDS]; -}; - - -#ifndef DP_WINDOW_SIZE -/* - * Memory Window Sizes - */ - -#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ -#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and - 8Zo V.2 */ -#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ - -/* - * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver - * normally will access only interested on the fpga_id, fpga_version, - * start_cpu and stop_cpu. - */ - -struct CUSTOM_REG { - __u32 fpga_id; /* FPGA Identification Register */ - __u32 fpga_version; /* FPGA Version Number Register */ - __u32 cpu_start; /* CPU start Register (write) */ - __u32 cpu_stop; /* CPU stop Register (write) */ - __u32 misc_reg; /* Miscellaneous Register */ - __u32 idt_mode; /* IDT mode Register */ - __u32 uart_irq_status; /* UART IRQ status Register */ - __u32 clear_timer0_irq; /* Clear timer interrupt Register */ - __u32 clear_timer1_irq; /* Clear timer interrupt Register */ - __u32 clear_timer2_irq; /* Clear timer interrupt Register */ - __u32 test_register; /* Test Register */ - __u32 test_count; /* Test Count Register */ - __u32 timer_select; /* Timer select register */ - __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ - __u32 ram_wait_state; /* RAM wait-state Register */ - __u32 uart_wait_state; /* UART wait-state Register */ - __u32 timer_wait_state; /* timer wait-state Register */ - __u32 ack_wait_state; /* ACK wait State Register */ -}; - -/* - * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime - * registers. This structure can be used to access the 9060 registers - * (memory mapped). - */ - -struct RUNTIME_9060 { - __u32 loc_addr_range; /* 00h - Local Address Range */ - __u32 loc_addr_base; /* 04h - Local Address Base */ - __u32 loc_arbitr; /* 08h - Local Arbitration */ - __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ - __u32 loc_rom_range; /* 10h - Local ROM Range */ - __u32 loc_rom_base; /* 14h - Local ROM Base */ - __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ - __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ - __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ - __u32 loc_range_io; /* 24h - Local Range for Master IO */ - __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ - __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ - __u32 filler1; /* 30h */ - __u32 filler2; /* 34h */ - __u32 filler3; /* 38h */ - __u32 filler4; /* 3Ch */ - __u32 mail_box_0; /* 40h - Mail Box 0 */ - __u32 mail_box_1; /* 44h - Mail Box 1 */ - __u32 mail_box_2; /* 48h - Mail Box 2 */ - __u32 mail_box_3; /* 4Ch - Mail Box 3 */ - __u32 filler5; /* 50h */ - __u32 filler6; /* 54h */ - __u32 filler7; /* 58h */ - __u32 filler8; /* 5Ch */ - __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ - __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ - __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ - __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ -}; - -/* Values for the Local Base Address re-map register */ - -#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ -#define WIN_CREG 0x14000001L /* set the window to custom Registers */ - -/* Values timer select registers */ - -#define TIMER_BY_1M 0x00 /* clock divided by 1M */ -#define TIMER_BY_256K 0x01 /* clock divided by 256k */ -#define TIMER_BY_128K 0x02 /* clock divided by 128k */ -#define TIMER_BY_32K 0x03 /* clock divided by 32k */ - -/****************** ****************** *******************/ -#endif - -#ifndef ZFIRM_ID -/* #include "zfwint.h" */ -/****************** ****************** *******************/ -/* - * This file contains the definitions for interfacing with the - * Cyclom-Z ZFIRM Firmware. - */ - -/* General Constant definitions */ - -#define MAX_CHAN 64 /* max number of channels per board */ - -/* firmware id structure (set after boot) */ - -#define ID_ADDRESS 0x00000180L /* signature/pointer address */ -#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ -#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ -#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ - -#define ZF_TINACT_DEF 1000 /* default inactivity timeout - (1000 ms) */ -#define ZF_TINACT ZF_TINACT_DEF - -struct FIRM_ID { - __u32 signature; /* ZFIRM/U signature */ - __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ -}; - -/* Op. System id */ - -#define C_OS_LINUX 0x00000030 /* generic Linux system */ - -/* channel op_mode */ - -#define C_CH_DISABLE 0x00000000 /* channel is disabled */ -#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ -#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ -#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ -#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ - -/* comm_parity - parity */ - -#define C_PR_NONE 0x00000000 /* None */ -#define C_PR_ODD 0x00000001 /* Odd */ -#define C_PR_EVEN 0x00000002 /* Even */ -#define C_PR_MARK 0x00000004 /* Mark */ -#define C_PR_SPACE 0x00000008 /* Space */ -#define C_PR_PARITY 0x000000ff - -#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ -#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ - -/* comm_data_l - data length and stop bits */ - -#define C_DL_CS5 0x00000001 -#define C_DL_CS6 0x00000002 -#define C_DL_CS7 0x00000004 -#define C_DL_CS8 0x00000008 -#define C_DL_CS 0x0000000f -#define C_DL_1STOP 0x00000010 -#define C_DL_15STOP 0x00000020 -#define C_DL_2STOP 0x00000040 -#define C_DL_STOP 0x000000f0 - -/* interrupt enabling/status */ - -#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ -#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ -#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ -#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ -#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ -#define C_IN_MDCD 0x00000100 /* modem DCD change */ -#define C_IN_MDSR 0x00000200 /* modem DSR change */ -#define C_IN_MRI 0x00000400 /* modem RI change */ -#define C_IN_MCTS 0x00000800 /* modem CTS change */ -#define C_IN_RXBRK 0x00001000 /* Break received */ -#define C_IN_PR_ERROR 0x00002000 /* parity error */ -#define C_IN_FR_ERROR 0x00004000 /* frame error */ -#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ -#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ -#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ -#define C_IN_MRTS 0x00040000 /* modem RTS drop */ -#define C_IN_ICHAR 0x00080000 - -/* flow control */ - -#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ -#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ -#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ -#define C_FL_SWFLOW 0x0000000f - -/* flow status */ - -#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ -#define C_FS_SENDING 0x00000001 /* UART is sending data */ -#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ - -/* rs_control/rs_status RS-232 signals */ - -#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in - IOCTLM command */ -#define C_RS_RTS 0x00000001 /* RTS */ -#define C_RS_DTR 0x00000004 /* DTR */ -#define C_RS_DCD 0x00000100 /* CD */ -#define C_RS_DSR 0x00000200 /* DSR */ -#define C_RS_RI 0x00000400 /* RI */ -#define C_RS_CTS 0x00000800 /* CTS */ - -/* commands Host <-> Board */ - -#define C_CM_RESET 0x01 /* reset/flush buffers */ -#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ -#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ -#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ -#define C_CM_SENDXOFF 0x10 /* send Xoff */ -#define C_CM_SENDXON 0x11 /* send Xon */ -#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ -#define C_CM_SENDBRK 0x41 /* send break */ -#define C_CM_INTBACK 0x42 /* Interrupt back */ -#define C_CM_SET_BREAK 0x43 /* Tx break on */ -#define C_CM_CLR_BREAK 0x44 /* Tx break off */ -#define C_CM_CMD_DONE 0x45 /* Previous command done */ -#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ -#define C_CM_TINACT 0x51 /* set inactivity detection */ -#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ -#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ -#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ -#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ -#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ -#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ -#define C_CM_Q_ENABLE 0x58 /* enables queue access from the - driver */ -#define C_CM_Q_DISABLE 0x59 /* disables queue access from the - driver */ - -#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ -#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ -#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ -#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ -#define C_CM_TXFEMPTY 0x64 -#define C_CM_ICHAR 0x65 -#define C_CM_MDCD 0x70 /* modem DCD change */ -#define C_CM_MDSR 0x71 /* modem DSR change */ -#define C_CM_MRI 0x72 /* modem RI change */ -#define C_CM_MCTS 0x73 /* modem CTS change */ -#define C_CM_MRTS 0x74 /* modem RTS drop */ -#define C_CM_RXBRK 0x84 /* Break received */ -#define C_CM_PR_ERROR 0x85 /* Parity error */ -#define C_CM_FR_ERROR 0x86 /* Frame error */ -#define C_CM_OVR_ERROR 0x87 /* Overrun error */ -#define C_CM_RXOFL 0x88 /* RX buffer overflow */ -#define C_CM_CMDERROR 0x90 /* command error */ -#define C_CM_FATAL 0x91 /* fatal error */ -#define C_CM_HW_RESET 0x92 /* reset board */ - -/* - * CH_CTRL - This per port structure contains all parameters - * that control an specific port. It can be seen as the - * configuration registers of a "super-serial-controller". - */ - -struct CH_CTRL { - __u32 op_mode; /* operation mode */ - __u32 intr_enable; /* interrupt masking */ - __u32 sw_flow; /* SW flow control */ - __u32 flow_status; /* output flow status */ - __u32 comm_baud; /* baud rate - numerically specified */ - __u32 comm_parity; /* parity */ - __u32 comm_data_l; /* data length/stop */ - __u32 comm_flags; /* other flags */ - __u32 hw_flow; /* HW flow control */ - __u32 rs_control; /* RS-232 outputs */ - __u32 rs_status; /* RS-232 inputs */ - __u32 flow_xon; /* xon char */ - __u32 flow_xoff; /* xoff char */ - __u32 hw_overflow; /* hw overflow counter */ - __u32 sw_overflow; /* sw overflow counter */ - __u32 comm_error; /* frame/parity error counter */ - __u32 ichar; - __u32 filler[7]; -}; - - -/* - * BUF_CTRL - This per channel structure contains - * all Tx and Rx buffer control for a given channel. - */ - -struct BUF_CTRL { - __u32 flag_dma; /* buffers are in Host memory */ - __u32 tx_bufaddr; /* address of the tx buffer */ - __u32 tx_bufsize; /* tx buffer size */ - __u32 tx_threshold; /* tx low water mark */ - __u32 tx_get; /* tail index tx buf */ - __u32 tx_put; /* head index tx buf */ - __u32 rx_bufaddr; /* address of the rx buffer */ - __u32 rx_bufsize; /* rx buffer size */ - __u32 rx_threshold; /* rx high water mark */ - __u32 rx_get; /* tail index rx buf */ - __u32 rx_put; /* head index rx buf */ - __u32 filler[5]; /* filler to align structures */ -}; - -/* - * BOARD_CTRL - This per board structure contains all global - * control fields related to the board. - */ - -struct BOARD_CTRL { - - /* static info provided by the on-board CPU */ - __u32 n_channel; /* number of channels */ - __u32 fw_version; /* firmware version */ - - /* static info provided by the driver */ - __u32 op_system; /* op_system id */ - __u32 dr_version; /* driver version */ - - /* board control area */ - __u32 inactivity; /* inactivity control */ - - /* host to FW commands */ - __u32 hcmd_channel; /* channel number */ - __u32 hcmd_param; /* pointer to parameters */ - - /* FW to Host commands */ - __u32 fwcmd_channel; /* channel number */ - __u32 fwcmd_param; /* pointer to parameters */ - __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ - - /* filler so the structures are aligned */ - __u32 filler[6]; -}; - -/* Host Interrupt Queue */ - -#define QUEUE_SIZE (10*MAX_CHAN) - -struct INT_QUEUE { - unsigned char intr_code[QUEUE_SIZE]; - unsigned long channel[QUEUE_SIZE]; - unsigned long param[QUEUE_SIZE]; - unsigned long put; - unsigned long get; -}; - -/* - * ZFW_CTRL - This is the data structure that includes all other - * data structures used by the Firmware. - */ - -struct ZFW_CTRL { - struct BOARD_CTRL board_ctrl; - struct CH_CTRL ch_ctrl[MAX_CHAN]; - struct BUF_CTRL buf_ctrl[MAX_CHAN]; -}; - -/****************** ****************** *******************/ -#endif - -#endif /* _UAPI_LINUX_CYCLADES_H */ diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index 30f68b42eeb5..61bf4774b8f2 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -426,6 +426,7 @@ typedef struct elf64_shdr { #define NT_ARM_PACA_KEYS 0x407 /* ARM pointer authentication address keys */ #define NT_ARM_PACG_KEYS 0x408 /* ARM pointer authentication generic key */ #define NT_ARM_TAGGED_ADDR_CTRL 0x409 /* arm64 tagged address control (prctl()) */ +#define NT_ARM_PAC_ENABLED_KEYS 0x40a /* arm64 ptr auth enabled keys (prctl()) */ #define NT_ARC_V2 0x600 /* ARCv2 accumulator/extra registers */ #define NT_VMCOREDD 0x700 /* Vmcore Device Dump Note */ #define NT_MIPS_DSP 0x800 /* MIPS DSP ASE registers */ diff --git a/include/uapi/linux/idxd.h b/include/uapi/linux/idxd.h index 236d437947bc..e33997b4d750 100644 --- a/include/uapi/linux/idxd.h +++ b/include/uapi/linux/idxd.h @@ -247,8 +247,8 @@ struct dsa_completion_record { uint32_t rsvd2:8; }; - uint16_t delta_rec_size; - uint16_t crc_val; + uint32_t delta_rec_size; + uint32_t crc_val; /* DIF check & strip */ struct { diff --git a/include/uapi/linux/iio/buffer.h b/include/uapi/linux/iio/buffer.h new file mode 100644 index 000000000000..13939032b3f6 --- /dev/null +++ b/include/uapi/linux/iio/buffer.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* industrial I/O buffer definitions needed both in and out of kernel + */ + +#ifndef _UAPI_IIO_BUFFER_H_ +#define _UAPI_IIO_BUFFER_H_ + +#define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0x91, int) + +#endif /* _UAPI_IIO_BUFFER_H_ */ diff --git a/include/uapi/linux/major.h b/include/uapi/linux/major.h index 7e5fa8e15c43..4e5f2b3a3d54 100644 --- a/include/uapi/linux/major.h +++ b/include/uapi/linux/major.h @@ -34,8 +34,6 @@ #define GOLDSTAR_CDROM_MAJOR 16 #define OPTICS_CDROM_MAJOR 17 #define SANYO_CDROM_MAJOR 18 -#define CYCLADES_MAJOR 19 -#define CYCLADESAUX_MAJOR 20 #define MITSUMI_X_CDROM_MAJOR 20 #define MFM_ACORN_MAJOR 21 /* ARM Linux /dev/mfm */ #define SCSI_GENERIC_MAJOR 21 diff --git a/include/uapi/linux/map_to_7segment.h b/include/uapi/linux/map_to_7segment.h index 8b02088f96e3..04c8b55812e7 100644 --- a/include/uapi/linux/map_to_7segment.h +++ b/include/uapi/linux/map_to_7segment.h @@ -1,20 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef MAP_TO_7SEGMENT_H diff --git a/include/uapi/linux/nfsd/nfsfh.h b/include/uapi/linux/nfsd/nfsfh.h index ff0ca88b1c8f..427294dd56a1 100644 --- a/include/uapi/linux/nfsd/nfsfh.h +++ b/include/uapi/linux/nfsd/nfsfh.h @@ -64,13 +64,24 @@ struct nfs_fhbase_old { * in include/linux/exportfs.h for currently registered values. */ struct nfs_fhbase_new { - __u8 fb_version; /* == 1, even => nfs_fhbase_old */ - __u8 fb_auth_type; - __u8 fb_fsid_type; - __u8 fb_fileid_type; - __u32 fb_auth[1]; -/* __u32 fb_fsid[0]; floating */ -/* __u32 fb_fileid[0]; floating */ + union { + struct { + __u8 fb_version_aux; /* == 1, even => nfs_fhbase_old */ + __u8 fb_auth_type_aux; + __u8 fb_fsid_type_aux; + __u8 fb_fileid_type_aux; + __u32 fb_auth[1]; + /* __u32 fb_fsid[0]; floating */ + /* __u32 fb_fileid[0]; floating */ + }; + struct { + __u8 fb_version; /* == 1, even => nfs_fhbase_old */ + __u8 fb_auth_type; + __u8 fb_fsid_type; + __u8 fb_fileid_type; + __u32 fb_auth_flex[]; /* flexible-array member */ + }; + }; }; struct knfsd_fh { @@ -97,7 +108,7 @@ struct knfsd_fh { #define fh_fsid_type fh_base.fh_new.fb_fsid_type #define fh_auth_type fh_base.fh_new.fb_auth_type #define fh_fileid_type fh_base.fh_new.fb_fileid_type -#define fh_fsid fh_base.fh_new.fb_auth +#define fh_fsid fh_base.fh_new.fb_auth_flex /* Do not use, provided for userspace compatiblity. */ #define fh_auth fh_base.fh_new.fb_auth diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 667f1aed091c..18a9f59dc067 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -255,4 +255,8 @@ struct prctl_mm_map { # define SYSCALL_DISPATCH_FILTER_ALLOW 0 # define SYSCALL_DISPATCH_FILTER_BLOCK 1 +/* Set/get enabled arm64 pointer authentication keys */ +#define PR_PAC_SET_ENABLED_KEYS 60 +#define PR_PAC_GET_ENABLED_KEYS 61 + #endif /* _LINUX_PRCTL_H */ diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h index 36e3efb81b01..583ca0d9a79d 100644 --- a/include/uapi/linux/rkisp1-config.h +++ b/include/uapi/linux/rkisp1-config.h @@ -15,7 +15,7 @@ #define RKISP1_CIF_ISP_MODULE_BLS (1U << 1) /* Sensor De-gamma */ #define RKISP1_CIF_ISP_MODULE_SDG (1U << 2) -/* Histogram */ +/* Histogram statistics configuration */ #define RKISP1_CIF_ISP_MODULE_HST (1U << 3) /* Lens Shade Control */ #define RKISP1_CIF_ISP_MODULE_LSC (1U << 4) @@ -31,13 +31,13 @@ #define RKISP1_CIF_ISP_MODULE_GOC (1U << 9) /* Color Processing */ #define RKISP1_CIF_ISP_MODULE_CPROC (1U << 10) -/* Auto Focus Control */ +/* Auto Focus Control statistics configuration */ #define RKISP1_CIF_ISP_MODULE_AFC (1U << 11) -/* Auto White Balancing */ +/* Auto White Balancing statistics configuration */ #define RKISP1_CIF_ISP_MODULE_AWB (1U << 12) /* Image Effect */ #define RKISP1_CIF_ISP_MODULE_IE (1U << 13) -/* Auto Exposure Control */ +/* Auto Exposure Control statistics configuration */ #define RKISP1_CIF_ISP_MODULE_AEC (1U << 14) /* Wide Dynamic Range */ #define RKISP1_CIF_ISP_MODULE_WDR (1U << 15) @@ -411,7 +411,7 @@ struct rkisp1_cif_isp_cproc_config { }; /** - * struct rkisp1_cif_isp_awb_meas_config - Configuration used by auto white balance + * struct rkisp1_cif_isp_awb_meas_config - Configuration for the AWB statistics * * @awb_mode: the awb meas mode. From enum rkisp1_cif_isp_awb_mode_type. * @awb_wnd: white balance measurement window (in pixels) @@ -550,7 +550,7 @@ struct rkisp1_cif_isp_goc_config { }; /** - * struct rkisp1_cif_isp_hst_config - Configuration used by Histogram + * struct rkisp1_cif_isp_hst_config - Configuration for Histogram statistics * * @mode: histogram mode (from enum rkisp1_cif_isp_histogram_mode) * @histogram_predivider: process every stepsize pixel, all other pixels are @@ -575,7 +575,7 @@ struct rkisp1_cif_isp_hst_config { }; /** - * struct rkisp1_cif_isp_aec_config - Configuration used by Auto Exposure Control + * struct rkisp1_cif_isp_aec_config - Configuration for Auto Exposure statistics * * @mode: Exposure measure mode (from enum rkisp1_cif_isp_exp_meas_mode) * @autostop: stop mode (from enum rkisp1_cif_isp_exp_ctrl_autostop) @@ -588,7 +588,7 @@ struct rkisp1_cif_isp_aec_config { }; /** - * struct rkisp1_cif_isp_afc_config - Configuration used by Auto Focus Control + * struct rkisp1_cif_isp_afc_config - Configuration for the Auto Focus statistics * * @num_afm_win: max RKISP1_CIF_ISP_AFM_MAX_WINDOWS * @afm_win: coordinates of the meas window diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h index 93eb3c496ff1..fa6b16e5fdd8 100644 --- a/include/uapi/linux/serial.h +++ b/include/uapi/linux/serial.h @@ -52,11 +52,11 @@ struct serial_struct { #define PORT_16450 2 #define PORT_16550 3 #define PORT_16550A 4 -#define PORT_CIRRUS 5 /* usurped by cyclades.c */ +#define PORT_CIRRUS 5 #define PORT_16650 6 #define PORT_16650V2 7 #define PORT_16750 8 -#define PORT_STARTECH 9 /* usurped by cyclades.c */ +#define PORT_STARTECH 9 #define PORT_16C950 10 /* Oxford Semiconductor */ #define PORT_16654 11 #define PORT_16850 12 diff --git a/include/uapi/linux/surface_aggregator/dtx.h b/include/uapi/linux/surface_aggregator/dtx.h new file mode 100644 index 000000000000..0833aab0d819 --- /dev/null +++ b/include/uapi/linux/surface_aggregator/dtx.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Surface DTX (clipboard detachment system driver) user-space interface. + * + * Definitions, structs, and IOCTLs for the /dev/surface/dtx misc device. This + * device allows user-space to control the clipboard detachment process on + * Surface Book series devices. + * + * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com> + */ + +#ifndef _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H +#define _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +/* Status/error categories */ +#define SDTX_CATEGORY_STATUS 0x0000 +#define SDTX_CATEGORY_RUNTIME_ERROR 0x1000 +#define SDTX_CATEGORY_HARDWARE_ERROR 0x2000 +#define SDTX_CATEGORY_UNKNOWN 0xf000 + +#define SDTX_CATEGORY_MASK 0xf000 +#define SDTX_CATEGORY(value) ((value) & SDTX_CATEGORY_MASK) + +#define SDTX_STATUS(code) ((code) | SDTX_CATEGORY_STATUS) +#define SDTX_ERR_RT(code) ((code) | SDTX_CATEGORY_RUNTIME_ERROR) +#define SDTX_ERR_HW(code) ((code) | SDTX_CATEGORY_HARDWARE_ERROR) +#define SDTX_UNKNOWN(code) ((code) | SDTX_CATEGORY_UNKNOWN) + +#define SDTX_SUCCESS(value) (SDTX_CATEGORY(value) == SDTX_CATEGORY_STATUS) + +/* Latch status values */ +#define SDTX_LATCH_CLOSED SDTX_STATUS(0x00) +#define SDTX_LATCH_OPENED SDTX_STATUS(0x01) + +/* Base state values */ +#define SDTX_BASE_DETACHED SDTX_STATUS(0x00) +#define SDTX_BASE_ATTACHED SDTX_STATUS(0x01) + +/* Runtime errors (non-critical) */ +#define SDTX_DETACH_NOT_FEASIBLE SDTX_ERR_RT(0x01) +#define SDTX_DETACH_TIMEDOUT SDTX_ERR_RT(0x02) + +/* Hardware errors (critical) */ +#define SDTX_ERR_FAILED_TO_OPEN SDTX_ERR_HW(0x01) +#define SDTX_ERR_FAILED_TO_REMAIN_OPEN SDTX_ERR_HW(0x02) +#define SDTX_ERR_FAILED_TO_CLOSE SDTX_ERR_HW(0x03) + +/* Base types */ +#define SDTX_DEVICE_TYPE_HID 0x0100 +#define SDTX_DEVICE_TYPE_SSH 0x0200 + +#define SDTX_DEVICE_TYPE_MASK 0x0f00 +#define SDTX_DEVICE_TYPE(value) ((value) & SDTX_DEVICE_TYPE_MASK) + +#define SDTX_BASE_TYPE_HID(id) ((id) | SDTX_DEVICE_TYPE_HID) +#define SDTX_BASE_TYPE_SSH(id) ((id) | SDTX_DEVICE_TYPE_SSH) + +/** + * enum sdtx_device_mode - Mode describing how (and if) the clipboard is + * attached to the base of the device. + * @SDTX_DEVICE_MODE_TABLET: The clipboard is detached from the base and the + * device operates as tablet. + * @SDTX_DEVICE_MODE_LAPTOP: The clipboard is attached normally to the base + * and the device operates as laptop. + * @SDTX_DEVICE_MODE_STUDIO: The clipboard is attached to the base in reverse. + * The device operates as tablet with keyboard and + * touchpad deactivated, however, the base battery + * and, if present in the specific device model, dGPU + * are available to the system. + */ +enum sdtx_device_mode { + SDTX_DEVICE_MODE_TABLET = 0x00, + SDTX_DEVICE_MODE_LAPTOP = 0x01, + SDTX_DEVICE_MODE_STUDIO = 0x02, +}; + +/** + * struct sdtx_event - Event provided by reading from the DTX device file. + * @length: Length of the event payload, in bytes. + * @code: Event code, detailing what type of event this is. + * @data: Payload of the event, containing @length bytes. + * + * See &enum sdtx_event_code for currently valid event codes. + */ +struct sdtx_event { + __u16 length; + __u16 code; + __u8 data[]; +} __attribute__((__packed__)); + +/** + * enum sdtx_event_code - Code describing the type of an event. + * @SDTX_EVENT_REQUEST: Detachment request event type. + * @SDTX_EVENT_CANCEL: Cancel detachment process event type. + * @SDTX_EVENT_BASE_CONNECTION: Base/clipboard connection change event type. + * @SDTX_EVENT_LATCH_STATUS: Latch status change event type. + * @SDTX_EVENT_DEVICE_MODE: Device mode change event type. + * + * Used in &struct sdtx_event to describe the type of the event. Further event + * codes are reserved for future use. Any event parser should be able to + * gracefully handle unknown events, i.e. by simply skipping them. + * + * Consult the DTX user-space interface documentation for details regarding + * the individual event types. + */ +enum sdtx_event_code { + SDTX_EVENT_REQUEST = 1, + SDTX_EVENT_CANCEL = 2, + SDTX_EVENT_BASE_CONNECTION = 3, + SDTX_EVENT_LATCH_STATUS = 4, + SDTX_EVENT_DEVICE_MODE = 5, +}; + +/** + * struct sdtx_base_info - Describes if and what type of base is connected. + * @state: The state of the connection. Valid values are %SDTX_BASE_DETACHED, + * %SDTX_BASE_ATTACHED, and %SDTX_DETACH_NOT_FEASIBLE (in case a base + * is attached but low clipboard battery prevents detachment). Other + * values are currently reserved. + * @base_id: The type of base connected. Zero if no base is connected. + */ +struct sdtx_base_info { + __u16 state; + __u16 base_id; +} __attribute__((__packed__)); + +/* IOCTLs */ +#define SDTX_IOCTL_EVENTS_ENABLE _IO(0xa5, 0x21) +#define SDTX_IOCTL_EVENTS_DISABLE _IO(0xa5, 0x22) + +#define SDTX_IOCTL_LATCH_LOCK _IO(0xa5, 0x23) +#define SDTX_IOCTL_LATCH_UNLOCK _IO(0xa5, 0x24) + +#define SDTX_IOCTL_LATCH_REQUEST _IO(0xa5, 0x25) +#define SDTX_IOCTL_LATCH_CONFIRM _IO(0xa5, 0x26) +#define SDTX_IOCTL_LATCH_HEARTBEAT _IO(0xa5, 0x27) +#define SDTX_IOCTL_LATCH_CANCEL _IO(0xa5, 0x28) + +#define SDTX_IOCTL_GET_BASE_INFO _IOR(0xa5, 0x29, struct sdtx_base_info) +#define SDTX_IOCTL_GET_DEVICE_MODE _IOR(0xa5, 0x2a, __u16) +#define SDTX_IOCTL_GET_LATCH_STATUS _IOR(0xa5, 0x2b, __u16) + +#endif /* _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H */ diff --git a/include/uapi/linux/tty_flags.h b/include/uapi/linux/tty_flags.h index 900a32e63424..cf25056d4b27 100644 --- a/include/uapi/linux/tty_flags.h +++ b/include/uapi/linux/tty_flags.h @@ -39,7 +39,7 @@ * WARNING: These flags are no longer used and have been superceded by the * TTY_PORT_ flags in the iflags field (and not userspace-visible) */ -#ifndef _KERNEL_ +#ifndef __KERNEL__ #define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ #define ASYNCB_SUSPENDED 30 /* Serial port is suspended */ #define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ @@ -73,15 +73,15 @@ #define ASYNC_MAGIC_MULTIPLIER (1U << ASYNCB_MAGIC_MULTIPLIER) #define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) -#define ASYNC_DEPRECATED (ASYNC_SESSION_LOCKOUT | ASYNC_PGRP_LOCKOUT | \ - ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE) +#define ASYNC_DEPRECATED (ASYNC_SPLIT_TERMIOS | ASYNC_SESSION_LOCKOUT | \ + ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE) #define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \ ASYNC_LOW_LATENCY) #define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) #define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) #define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) -#ifndef _KERNEL_ +#ifndef __KERNEL__ /* These flags are no longer used (and were always masked from userspace) */ #define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED) #define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE) diff --git a/include/uapi/linux/usb/video.h b/include/uapi/linux/usb/video.h index d854cb19c42c..bfdae12cdacf 100644 --- a/include/uapi/linux/usb/video.h +++ b/include/uapi/linux/usb/video.h @@ -302,9 +302,10 @@ struct uvc_processing_unit_descriptor { __u8 bControlSize; __u8 bmControls[2]; __u8 iProcessing; + __u8 bmVideoStandards; } __attribute__((__packed__)); -#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) +#define UVC_DT_PROCESSING_UNIT_SIZE(n) (10+(n)) /* 3.7.2.6. Extension Unit Descriptor */ struct uvc_extension_unit_descriptor { diff --git a/include/uapi/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h index f80f05b3c423..8288137387c0 100644 --- a/include/uapi/linux/uvcvideo.h +++ b/include/uapi/linux/uvcvideo.h @@ -76,11 +76,11 @@ struct uvc_xu_control_query { /** * struct uvc_meta_buf - metadata buffer building block - * @ns - system timestamp of the payload in nanoseconds - * @sof - USB Frame Number - * @length - length of the payload header - * @flags - payload header flags - * @buf - optional device-specific header data + * @ns: system timestamp of the payload in nanoseconds + * @sof: USB Frame Number + * @length: length of the payload header + * @flags: payload header flags + * @buf: optional device-specific header data * * UVC metadata nodes fill buffers with possibly multiple instances of this * struct. The first two fields are added by the driver, they can be used for diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 039c0d7add1b..d43bec5f1afd 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -66,6 +66,7 @@ #define V4L2_CTRL_CLASS_RF_TUNER 0x00a20000 /* RF tuner controls */ #define V4L2_CTRL_CLASS_DETECT 0x00a30000 /* Detection controls */ #define V4L2_CTRL_CLASS_CODEC_STATELESS 0x00a40000 /* Stateless codecs controls */ +#define V4L2_CTRL_CLASS_COLORIMETRY 0x00a50000 /* Colorimetry controls */ /* User-class control IDs */ @@ -428,6 +429,11 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_CODEC_BASE+228) #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_CODEC_BASE+229) #define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (V4L2_CID_CODEC_BASE+230) +#define V4L2_CID_MPEG_VIDEO_AU_DELIMITER (V4L2_CID_CODEC_BASE+231) +#define V4L2_CID_MPEG_VIDEO_LTR_COUNT (V4L2_CID_CODEC_BASE+232) +#define V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (V4L2_CID_CODEC_BASE+233) +#define V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (V4L2_CID_CODEC_BASE+234) +#define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+235) /* CIDs for the MPEG-2 Part 2 (H.262) codec */ #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270) @@ -797,6 +803,9 @@ enum v4l2_mpeg_video_frame_skip_mode { #define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (V4L2_CID_CODEC_BASE + 651) #define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (V4L2_CID_CODEC_BASE + 652) +#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (V4L2_CID_CODEC_BASE + 653) +#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (V4L2_CID_CODEC_BASE + 654) + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0) @@ -1329,7 +1338,7 @@ struct v4l2_ctrl_h264_sps { * struct v4l2_ctrl_h264_pps - H264 picture parameter set * * Except where noted, all the members on this picture parameter set - * structure match the sequence parameter set syntax as specified + * structure match the picture parameter set syntax as specified * by the H264 specification. * * In particular, V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT flag @@ -1657,6 +1666,236 @@ struct v4l2_ctrl_fwht_params { __u32 quantization; }; +/* Stateless VP8 control */ + +#define V4L2_VP8_SEGMENT_FLAG_ENABLED 0x01 +#define V4L2_VP8_SEGMENT_FLAG_UPDATE_MAP 0x02 +#define V4L2_VP8_SEGMENT_FLAG_UPDATE_FEATURE_DATA 0x04 +#define V4L2_VP8_SEGMENT_FLAG_DELTA_VALUE_MODE 0x08 + +/** + * struct v4l2_vp8_segment - VP8 segment-based adjustments parameters + * + * @quant_update: update values for the segment quantizer. + * @lf_update: update values for the loop filter level. + * @segment_probs: branch probabilities of the segment_id decoding tree. + * @padding: padding field. Should be zeroed by applications. + * @flags: see V4L2_VP8_SEGMENT_FLAG_{}. + * + * This structure contains segment-based adjustments related parameters. + * See the 'update_segmentation()' part of the frame header syntax, + * and section '9.3. Segment-Based Adjustments' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_segment { + __s8 quant_update[4]; + __s8 lf_update[4]; + __u8 segment_probs[3]; + __u8 padding; + __u32 flags; +}; + +#define V4L2_VP8_LF_ADJ_ENABLE 0x01 +#define V4L2_VP8_LF_DELTA_UPDATE 0x02 +#define V4L2_VP8_LF_FILTER_TYPE_SIMPLE 0x04 + +/** + * struct v4l2_vp8_loop_filter - VP8 loop filter parameters + * + * @ref_frm_delta: Reference frame signed delta values. + * @mb_mode_delta: MB prediction mode signed delta values. + * @sharpness_level: matches sharpness_level syntax element. + * @level: matches loop_filter_level syntax element. + * @padding: padding field. Should be zeroed by applications. + * @flags: see V4L2_VP8_LF_FLAG_{}. + * + * This structure contains loop filter related parameters. + * See the 'mb_lf_adjustments()' part of the frame header syntax, + * and section '9.4. Loop Filter Type and Levels' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_loop_filter { + __s8 ref_frm_delta[4]; + __s8 mb_mode_delta[4]; + __u8 sharpness_level; + __u8 level; + __u16 padding; + __u32 flags; +}; + +/** + * struct v4l2_vp8_quantization - VP8 quantizattion indices + * + * @y_ac_qi: luma AC coefficient table index. + * @y_dc_delta: luma DC delta vaue. + * @y2_dc_delta: y2 block DC delta value. + * @y2_ac_delta: y2 block AC delta value. + * @uv_dc_delta: chroma DC delta value. + * @uv_ac_delta: chroma AC delta value. + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the quantization indices present + * in 'quant_indices()' part of the frame header syntax. + * See section '9.6. Dequantization Indices' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_quantization { + __u8 y_ac_qi; + __s8 y_dc_delta; + __s8 y2_dc_delta; + __s8 y2_ac_delta; + __s8 uv_dc_delta; + __s8 uv_ac_delta; + __u16 padding; +}; + +#define V4L2_VP8_COEFF_PROB_CNT 11 +#define V4L2_VP8_MV_PROB_CNT 19 + +/** + * struct v4l2_vp8_entropy - VP8 update probabilities + * + * @coeff_probs: coefficient probability update values. + * @y_mode_probs: luma intra-prediction probabilities. + * @uv_mode_probs: chroma intra-prediction probabilities. + * @mv_probs: mv decoding probability. + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the update probabilities present in + * 'token_prob_update()' and 'mv_prob_update()' part of the frame header. + * See section '17.2. Probability Updates' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_entropy { + __u8 coeff_probs[4][8][3][V4L2_VP8_COEFF_PROB_CNT]; + __u8 y_mode_probs[4]; + __u8 uv_mode_probs[3]; + __u8 mv_probs[2][V4L2_VP8_MV_PROB_CNT]; + __u8 padding[3]; +}; + +/** + * struct v4l2_vp8_entropy_coder_state - VP8 boolean coder state + * + * @range: coder state value for "Range" + * @value: coder state value for "Value" + * @bit_count: number of bits left in range "Value". + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the state for the boolean coder, as + * explained in section '7. Boolean Entropy Decoder' of the VP8 specification. + */ +struct v4l2_vp8_entropy_coder_state { + __u8 range; + __u8 value; + __u8 bit_count; + __u8 padding; +}; + +#define V4L2_VP8_FRAME_FLAG_KEY_FRAME 0x01 +#define V4L2_VP8_FRAME_FLAG_EXPERIMENTAL 0x02 +#define V4L2_VP8_FRAME_FLAG_SHOW_FRAME 0x04 +#define V4L2_VP8_FRAME_FLAG_MB_NO_SKIP_COEFF 0x08 +#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_GOLDEN 0x10 +#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_ALT 0x20 + +#define V4L2_VP8_FRAME_IS_KEY_FRAME(hdr) \ + (!!((hdr)->flags & V4L2_VP8_FRAME_FLAG_KEY_FRAME)) + +#define V4L2_CID_STATELESS_VP8_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 200) +/** + * struct v4l2_ctrl_vp8_frame - VP8 frame parameters + * + * @segment: segmentation parameters. See &v4l2_vp8_segment for more details + * @lf: loop filter parameters. See &v4l2_vp8_loop_filter for more details + * @quant: quantization parameters. See &v4l2_vp8_quantization for more details + * @entropy: update probabilities. See &v4l2_vp8_entropy for more details + * @coder_state: boolean coder state. See &v4l2_vp8_entropy_coder_state for more details + * @width: frame width. + * @height: frame height. + * @horizontal_scale: horizontal scaling factor. + * @vertical_scale: vertical scaling factor. + * @version: bitstream version. + * @prob_skip_false: frame header syntax element. + * @prob_intra: frame header syntax element. + * @prob_last: frame header syntax element. + * @prob_gf: frame header syntax element. + * @num_dct_parts: number of DCT coefficients partitions. + * @first_part_size: size of the first partition, i.e. the control partition. + * @first_part_header_bits: size in bits of the first partition header portion. + * @dct_part_sizes: DCT coefficients sizes. + * @last_frame_ts: "last" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @golden_frame_ts: "golden" reference buffer timestamp. + * @alt_frame_ts: "alt" reference buffer timestamp. + * @flags: see V4L2_VP8_FRAME_FLAG_{}. + */ +struct v4l2_ctrl_vp8_frame { + struct v4l2_vp8_segment segment; + struct v4l2_vp8_loop_filter lf; + struct v4l2_vp8_quantization quant; + struct v4l2_vp8_entropy entropy; + struct v4l2_vp8_entropy_coder_state coder_state; + + __u16 width; + __u16 height; + + __u8 horizontal_scale; + __u8 vertical_scale; + + __u8 version; + __u8 prob_skip_false; + __u8 prob_intra; + __u8 prob_last; + __u8 prob_gf; + __u8 num_dct_parts; + + __u32 first_part_size; + __u32 first_part_header_bits; + __u32 dct_part_sizes[8]; + + __u64 last_frame_ts; + __u64 golden_frame_ts; + __u64 alt_frame_ts; + + __u64 flags; +}; + +#define V4L2_CID_COLORIMETRY_CLASS_BASE (V4L2_CTRL_CLASS_COLORIMETRY | 0x900) +#define V4L2_CID_COLORIMETRY_CLASS (V4L2_CTRL_CLASS_COLORIMETRY | 1) + +#define V4L2_CID_COLORIMETRY_HDR10_CLL_INFO (V4L2_CID_COLORIMETRY_CLASS_BASE + 0) + +struct v4l2_ctrl_hdr10_cll_info { + __u16 max_content_light_level; + __u16 max_pic_average_light_level; +}; + +#define V4L2_CID_COLORIMETRY_HDR10_MASTERING_DISPLAY (V4L2_CID_COLORIMETRY_CLASS_BASE + 1) + +#define V4L2_HDR10_MASTERING_PRIMARIES_X_LOW 5 +#define V4L2_HDR10_MASTERING_PRIMARIES_X_HIGH 37000 +#define V4L2_HDR10_MASTERING_PRIMARIES_Y_LOW 5 +#define V4L2_HDR10_MASTERING_PRIMARIES_Y_HIGH 42000 +#define V4L2_HDR10_MASTERING_WHITE_POINT_X_LOW 5 +#define V4L2_HDR10_MASTERING_WHITE_POINT_X_HIGH 37000 +#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_LOW 5 +#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_HIGH 42000 +#define V4L2_HDR10_MASTERING_MAX_LUMA_LOW 50000 +#define V4L2_HDR10_MASTERING_MAX_LUMA_HIGH 100000000 +#define V4L2_HDR10_MASTERING_MIN_LUMA_LOW 1 +#define V4L2_HDR10_MASTERING_MIN_LUMA_HIGH 50000 + +struct v4l2_ctrl_hdr10_mastering_display { + __u16 display_primaries_x[3]; + __u16 display_primaries_y[3]; + __u16 white_point_x; + __u16 white_point_y; + __u32 max_display_mastering_luminance; + __u32 min_display_mastering_luminance; +}; + /* MPEG-compression definitions kept for backwards compatibility */ #ifndef __KERNEL__ #define V4L2_CTRL_CLASS_MPEG V4L2_CTRL_CLASS_CODEC diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index a38454d9e0f5..658106f5b5dc 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -44,6 +44,7 @@ enum v4l2_subdev_format_whence { * @which: format type (from enum v4l2_subdev_format_whence) * @pad: pad number, as reported by the media API * @format: media bus format (format code and frame size) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_format { __u32 which; @@ -57,6 +58,7 @@ struct v4l2_subdev_format { * @which: format type (from enum v4l2_subdev_format_whence) * @pad: pad number, as reported by the media API * @rect: pad crop rectangle boundaries + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_crop { __u32 which; @@ -78,6 +80,7 @@ struct v4l2_subdev_crop { * @code: format code (MEDIA_BUS_FMT_ definitions) * @which: format type (from enum v4l2_subdev_format_whence) * @flags: flags set by the driver, (V4L2_SUBDEV_MBUS_CODE_*) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_mbus_code_enum { __u32 pad; @@ -90,10 +93,15 @@ struct v4l2_subdev_mbus_code_enum { /** * struct v4l2_subdev_frame_size_enum - Media bus format enumeration - * @pad: pad number, as reported by the media API * @index: format index during enumeration + * @pad: pad number, as reported by the media API * @code: format code (MEDIA_BUS_FMT_ definitions) + * @min_width: minimum frame width, in pixels + * @max_width: maximum frame width, in pixels + * @min_height: minimum frame height, in pixels + * @max_height: maximum frame height, in pixels * @which: format type (from enum v4l2_subdev_format_whence) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_size_enum { __u32 index; @@ -111,6 +119,7 @@ struct v4l2_subdev_frame_size_enum { * struct v4l2_subdev_frame_interval - Pad-level frame rate * @pad: pad number, as reported by the media API * @interval: frame interval in seconds + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_interval { __u32 pad; @@ -127,6 +136,7 @@ struct v4l2_subdev_frame_interval { * @height: frame height in pixels * @interval: frame interval in seconds * @which: format type (from enum v4l2_subdev_format_whence) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_interval_enum { __u32 index; diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 79dbde3bcf8d..311a01cc5775 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -586,6 +586,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */ #define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ #define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ +#define V4L2_PIX_FMT_YUV24 v4l2_fourcc('Y', 'U', 'V', '3') /* 24 YUV-8-8-8 */ #define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ #define V4L2_PIX_FMT_AYUV32 v4l2_fourcc('A', 'Y', 'U', 'V') /* 32 AYUV-8-8-8-8 */ #define V4L2_PIX_FMT_XYUV32 v4l2_fourcc('X', 'Y', 'U', 'V') /* 32 XYUV-8-8-8-8 */ @@ -694,6 +695,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ +#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') /* VP8 parsed frame */ #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ #define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */ #define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */ @@ -975,8 +977,10 @@ struct v4l2_requestbuffers { * pointing to this plane * @fd: when memory is V4L2_MEMORY_DMABUF, a userspace file * descriptor associated with this plane + * @m: union of @mem_offset, @userptr and @fd * @data_offset: offset in the plane to the start of data; usually 0, * unless there is a header in front of the data + * @reserved: drivers and applications must zero this array * * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer * with two planes can have one plane for Y, and another for interleaved CbCr @@ -1018,10 +1022,14 @@ struct v4l2_plane { * a userspace file descriptor associated with this buffer * @planes: for multiplanar buffers; userspace pointer to the array of plane * info structs for this buffer + * @m: union of @offset, @userptr, @planes and @fd * @length: size in bytes of the buffer (NOT its payload) for single-plane * buffers (when type != *_MPLANE); number of elements in the * planes array for multi-plane buffers + * @reserved2: drivers and applications must zero this field * @request_fd: fd of the request that this buffer should use + * @reserved: for backwards compatibility with applications that do not know + * about @request_fd * * Contains data exchanged by application and driver using one of the Streaming * I/O methods. @@ -1059,7 +1067,7 @@ struct v4l2_buffer { #ifndef __KERNEL__ /** * v4l2_timeval_to_ns - Convert timeval to nanoseconds - * @ts: pointer to the timeval variable to be converted + * @tv: pointer to the timeval variable to be converted * * Returns the scalar nanosecond representation of the timeval * parameter. @@ -1120,6 +1128,7 @@ static inline __u64 v4l2_timeval_to_ns(const struct timeval *tv) * @flags: flags for newly created file, currently only O_CLOEXEC is * supported, refer to manual of open syscall for more details * @fd: file descriptor associated with DMABUF (set by driver) + * @reserved: drivers and applications must zero this array * * Contains data used for exporting a video buffer as DMABUF file descriptor. * The buffer is identified by a 'cookie' returned by VIDIOC_QUERYBUF @@ -1737,6 +1746,7 @@ struct v4l2_ext_control { struct v4l2_ctrl_h264_slice_params __user *p_h264_slice_params; struct v4l2_ctrl_h264_decode_params __user *p_h264_decode_params; struct v4l2_ctrl_fwht_params __user *p_fwht_params; + struct v4l2_ctrl_vp8_frame __user *p_vp8_frame; void __user *ptr; }; } __attribute__ ((packed)); @@ -1784,6 +1794,9 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_U32 = 0x0102, V4L2_CTRL_TYPE_AREA = 0x0106, + V4L2_CTRL_TYPE_HDR10_CLL_INFO = 0x0110, + V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY = 0x0111, + V4L2_CTRL_TYPE_H264_SPS = 0x0200, V4L2_CTRL_TYPE_H264_PPS = 0x0201, V4L2_CTRL_TYPE_H264_SCALING_MATRIX = 0x0202, @@ -1792,6 +1805,8 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_H264_PRED_WEIGHTS = 0x0205, V4L2_CTRL_TYPE_FWHT_PARAMS = 0x0220, + + V4L2_CTRL_TYPE_VP8_FRAME = 0x0240, }; /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ @@ -2229,6 +2244,7 @@ struct v4l2_mpeg_vbi_fmt_ivtv { * this plane will be used * @bytesperline: distance in bytes between the leftmost pixels in two * adjacent lines + * @reserved: drivers and applications must zero this array */ struct v4l2_plane_pix_format { __u32 sizeimage; @@ -2247,8 +2263,10 @@ struct v4l2_plane_pix_format { * @num_planes: number of planes for this format * @flags: format flags (V4L2_PIX_FMT_FLAG_*) * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding + * @hsv_enc: enum v4l2_hsv_encoding, HSV encoding * @quantization: enum v4l2_quantization, colorspace quantization * @xfer_func: enum v4l2_xfer_func, colorspace transfer function + * @reserved: drivers and applications must zero this array */ struct v4l2_pix_format_mplane { __u32 width; @@ -2273,6 +2291,7 @@ struct v4l2_pix_format_mplane { * struct v4l2_sdr_format - SDR format definition * @pixelformat: little endian four character code (fourcc) * @buffersize: maximum size in bytes required for data + * @reserved: drivers and applications must zero this array */ struct v4l2_sdr_format { __u32 pixelformat; @@ -2299,6 +2318,8 @@ struct v4l2_meta_format { * @vbi: raw VBI capture or output parameters * @sliced: sliced VBI capture or output parameters * @raw_data: placeholder for future extensions and custom formats + * @fmt: union of @pix, @pix_mp, @win, @vbi, @sliced, @sdr, @meta + * and @raw_data */ struct v4l2_format { __u32 type; diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h index 5a86b521a450..d3e017b5f0db 100644 --- a/include/uapi/misc/habanalabs.h +++ b/include/uapi/misc/habanalabs.h @@ -297,6 +297,7 @@ enum hl_device_status { #define HL_INFO_SYNC_MANAGER 14 #define HL_INFO_TOTAL_ENERGY 15 #define HL_INFO_PLL_FREQUENCY 16 +#define HL_INFO_POWER 17 #define HL_INFO_VERSION_MAX_LEN 128 #define HL_INFO_CARD_NAME_MAX_LEN 16 @@ -411,6 +412,14 @@ struct hl_pll_frequency_info { }; /** + * struct hl_power_info - power information + * @power: power consumption + */ +struct hl_power_info { + __u64 power; +}; + +/** * struct hl_info_sync_manager - sync manager information * @first_available_sync_object: first available sob * @first_available_monitor: first available monitor @@ -621,6 +630,7 @@ struct hl_cs_chunk { #define HL_CS_FLAGS_STAGED_SUBMISSION 0x40 #define HL_CS_FLAGS_STAGED_SUBMISSION_FIRST 0x80 #define HL_CS_FLAGS_STAGED_SUBMISSION_LAST 0x100 +#define HL_CS_FLAGS_CUSTOM_TIMEOUT 0x200 #define HL_CS_STATUS_SUCCESS 0 @@ -634,17 +644,10 @@ struct hl_cs_in { /* holds address of array of hl_cs_chunk for execution phase */ __u64 chunks_execute; - union { - /* this holds address of array of hl_cs_chunk for store phase - - * Currently not in use - */ - __u64 chunks_store; - - /* Sequence number of a staged submission CS - * valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set - */ - __u64 seq; - }; + /* Sequence number of a staged submission CS + * valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set + */ + __u64 seq; /* Number of chunks in restore phase array. Maximum number is * HL_MAX_JOBS_PER_CS @@ -656,8 +659,10 @@ struct hl_cs_in { */ __u32 num_chunks_execute; - /* Number of chunks in restore phase array - Currently not in use */ - __u32 num_chunks_store; + /* timeout in seconds - valid only if HL_CS_FLAGS_CUSTOM_TIMEOUT + * is set + */ + __u32 timeout; /* HL_CS_FLAGS_* */ __u32 cs_flags; @@ -682,14 +687,46 @@ union hl_cs_args { struct hl_cs_out out; }; +#define HL_WAIT_CS_FLAGS_INTERRUPT 0x2 +#define HL_WAIT_CS_FLAGS_INTERRUPT_MASK 0xFFF00000 + struct hl_wait_cs_in { - /* Command submission sequence number */ - __u64 seq; - /* Absolute timeout to wait in microseconds */ - __u64 timeout_us; + union { + struct { + /* Command submission sequence number */ + __u64 seq; + /* Absolute timeout to wait for command submission + * in microseconds + */ + __u64 timeout_us; + }; + + struct { + /* User address for completion comparison. + * upon interrupt, driver will compare the value pointed + * by this address with the supplied target value. + * in order not to perform any comparison, set address + * to all 1s. + * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT is set + */ + __u64 addr; + /* Target value for completion comparison */ + __u32 target; + /* Absolute timeout to wait for interrupt + * in microseconds + */ + __u32 interrupt_timeout_us; + }; + }; + /* Context ID - Currently not in use */ __u32 ctx_id; - __u32 pad; + /* HL_WAIT_CS_FLAGS_* + * If HL_WAIT_CS_FLAGS_INTERRUPT is set, this field should include + * interrupt id according to HL_WAIT_CS_FLAGS_INTERRUPT_MASK, in order + * not to specify an interrupt id ,set mask to all 1s. + */ + __u32 flags; }; #define HL_WAIT_CS_STATUS_COMPLETED 0 @@ -999,8 +1036,8 @@ struct hl_debug_args { * Each JOB will be enqueued on a specific queue, according to the user's input. * There can be more then one JOB per queue. * - * The CS IOCTL will receive three sets of JOBS. One set is for "restore" phase, - * a second set is for "execution" phase and a third set is for "store" phase. + * The CS IOCTL will receive two sets of JOBS. One set is for "restore" phase + * and a second set is for "execution" phase. * The JOBS on the "restore" phase are enqueued only after context-switch * (or if its the first CS for this context). The user can also order the * driver to run the "restore" phase explicitly diff --git a/include/uapi/misc/uacce/hisi_qm.h b/include/uapi/misc/uacce/hisi_qm.h index 6435f0bcb556..1faef5ff87ef 100644 --- a/include/uapi/misc/uacce/hisi_qm.h +++ b/include/uapi/misc/uacce/hisi_qm.h @@ -16,6 +16,7 @@ struct hisi_qp_ctx { #define HISI_QM_API_VER_BASE "hisi_qm_v1" #define HISI_QM_API_VER2_BASE "hisi_qm_v2" +#define HISI_QM_API_VER3_BASE "hisi_qm_v3" /* UACCE_CMD_QM_SET_QP_CTX: Set qp algorithm type */ #define UACCE_CMD_QM_SET_QP_CTX _IOWR('H', 10, struct hisi_qp_ctx) diff --git a/include/uapi/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h index 65b9db936557..b869990c2db2 100644 --- a/include/uapi/mtd/mtd-abi.h +++ b/include/uapi/mtd/mtd-abi.h @@ -205,6 +205,8 @@ struct otp_info { * without OOB, e.g., NOR flash. */ #define MEMWRITE _IOWR('M', 24, struct mtd_write_req) +/* Erase a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */ +#define OTPERASE _IOW('M', 25, struct otp_info) /* * Obsolete legacy interface. Keep it in order not to break userspace |