summaryrefslogtreecommitdiff
path: root/include/uapi
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi')
-rw-r--r--include/uapi/linux/can.h32
-rw-r--r--include/uapi/linux/can/netlink.h3
-rw-r--r--include/uapi/linux/ethtool.h439
-rw-r--r--include/uapi/linux/if.h134
-rw-r--r--include/uapi/linux/if_ether.h6
-rw-r--r--include/uapi/linux/if_link.h1
-rw-r--r--include/uapi/linux/in.h4
-rw-r--r--include/uapi/linux/in6.h4
-rw-r--r--include/uapi/linux/mpls.h34
-rw-r--r--include/uapi/linux/netdevice.h6
-rw-r--r--include/uapi/linux/netfilter/ipset/ip_set.h12
-rw-r--r--include/uapi/linux/netfilter/nf_tables.h6
-rw-r--r--include/uapi/linux/nfc.h9
-rw-r--r--include/uapi/linux/nl80211.h92
-rw-r--r--include/uapi/linux/pfkeyv2.h15
-rw-r--r--include/uapi/linux/ptp_clock.h39
-rw-r--r--include/uapi/linux/snmp.h6
-rw-r--r--include/uapi/linux/tcp.h3
-rw-r--r--include/uapi/linux/tcp_metrics.h7
-rw-r--r--include/uapi/linux/usb/cdc.h12
-rw-r--r--include/uapi/linux/xfrm.h10
21 files changed, 686 insertions, 188 deletions
diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h
index e52958d7c2d1..5d9d1d140718 100644
--- a/include/uapi/linux/can.h
+++ b/include/uapi/linux/can.h
@@ -8,6 +8,38 @@
* Copyright (c) 2002-2007 Volkswagen Group Electronic Research
* All rights reserved.
*
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
*/
#ifndef CAN_H
diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h
index df944ed206a8..7e2e1863db16 100644
--- a/include/uapi/linux/can/netlink.h
+++ b/include/uapi/linux/can/netlink.h
@@ -96,6 +96,7 @@ struct can_ctrlmode {
#define CAN_CTRLMODE_3_SAMPLES 0x04 /* Triple sampling mode */
#define CAN_CTRLMODE_ONE_SHOT 0x08 /* One-Shot mode */
#define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */
+#define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */
/*
* CAN device statistics
@@ -122,6 +123,8 @@ enum {
IFLA_CAN_RESTART_MS,
IFLA_CAN_RESTART,
IFLA_CAN_BERR_COUNTER,
+ IFLA_CAN_DATA_BITTIMING,
+ IFLA_CAN_DATA_BITTIMING_CONST,
__IFLA_CAN_MAX
};
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 38dbafaa5341..fd161e91b6d7 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -16,37 +16,97 @@
#include <linux/types.h>
#include <linux/if_ether.h>
-/* This should work for both 32 and 64 bit userland. */
+/* All structures exposed to userland should be defined such that they
+ * have the same layout for 32-bit and 64-bit userland.
+ */
+
+/**
+ * struct ethtool_cmd - link control and status
+ * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET
+ * @supported: Bitmask of %SUPPORTED_* flags for the link modes,
+ * physical connectors and other link features for which the
+ * interface supports autonegotiation or auto-detection.
+ * Read-only.
+ * @advertising: Bitmask of %ADVERTISED_* flags for the link modes,
+ * physical connectors and other link features that are
+ * advertised through autonegotiation or enabled for
+ * auto-detection.
+ * @speed: Low bits of the speed
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ * applicable. For clause 45 PHYs this is the PRTAD.
+ * @transceiver: Historically used to distinguish different possible
+ * PHY types, but not in a consistent way. Deprecated.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ * either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ * protocols supported by the interface; 0 if unknown.
+ * Read-only.
+ * @maxtxpkt: Historically used to report TX IRQ coalescing; now
+ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
+ * @maxrxpkt: Historically used to report RX IRQ coalescing; now
+ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
+ * @speed_hi: High bits of the speed
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ * %ETH_TP_MDI_*. If the status is unknown or not applicable, the
+ * value will be %ETH_TP_MDI_INVALID. Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads
+ * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ * When written successfully, the link should be renegotiated if
+ * necessary.
+ * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes
+ * and other link features that the link partner advertised
+ * through autonegotiation; 0 if unknown or not applicable.
+ * Read-only.
+ *
+ * The link speed in Mbps is split between @speed and @speed_hi. Use
+ * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to
+ * access it.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes. If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted. For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver. They should use
+ * %ETHTOOL_GSET to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SSET.
+ *
+ * Drivers that implement set_settings() should validate all fields
+ * other than @cmd that are not described as read-only or deprecated,
+ * and must ignore all fields described as read-only.
+ *
+ * Deprecated fields should be ignored by both users and drivers.
+ */
struct ethtool_cmd {
__u32 cmd;
- __u32 supported; /* Features this interface supports */
- __u32 advertising; /* Features this interface advertises */
- __u16 speed; /* The forced speed (lower bits) in
- * Mbps. Please use
- * ethtool_cmd_speed()/_set() to
- * access it */
- __u8 duplex; /* Duplex, half or full */
- __u8 port; /* Which connector port */
- __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45).
- * May be read-only or read-write
- * depending on the driver.
- */
- __u8 transceiver; /* Which transceiver to use */
- __u8 autoneg; /* Enable or disable autonegotiation */
- __u8 mdio_support; /* MDIO protocols supported. Read-only.
- * Not set by all drivers.
- */
- __u32 maxtxpkt; /* Tx pkts before generating tx int */
- __u32 maxrxpkt; /* Rx pkts before generating rx int */
- __u16 speed_hi; /* The forced speed (upper
- * bits) in Mbps. Please use
- * ethtool_cmd_speed()/_set() to
- * access it */
- __u8 eth_tp_mdix; /* twisted pair MDI-X status */
- __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
- * link should be renegotiated if necessary
- */
- __u32 lp_advertising; /* Features the link partner advertises */
+ __u32 supported;
+ __u32 advertising;
+ __u16 speed;
+ __u8 duplex;
+ __u8 port;
+ __u8 phy_address;
+ __u8 transceiver;
+ __u8 autoneg;
+ __u8 mdio_support;
+ __u32 maxtxpkt;
+ __u32 maxrxpkt;
+ __u16 speed_hi;
+ __u8 eth_tp_mdix;
+ __u8 eth_tp_mdix_ctrl;
+ __u32 lp_advertising;
__u32 reserved[2];
};
@@ -79,37 +139,68 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
#define ETHTOOL_FWVERS_LEN 32
#define ETHTOOL_BUSINFO_LEN 32
-/* these strings are set to whatever the driver author decides... */
+
+/**
+ * struct ethtool_drvinfo - general driver and device information
+ * @cmd: Command number = %ETHTOOL_GDRVINFO
+ * @driver: Driver short name. This should normally match the name
+ * in its bus driver structure (e.g. pci_driver::name). Must
+ * not be an empty string.
+ * @version: Driver version string; may be an empty string
+ * @fw_version: Firmware version string; may be an empty string
+ * @bus_info: Device bus address. This should match the dev_name()
+ * string for the underlying bus device, if there is one. May be
+ * an empty string.
+ * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and
+ * %ETHTOOL_SPFLAGS commands; also the number of strings in the
+ * %ETH_SS_PRIV_FLAGS set
+ * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS
+ * command; also the number of strings in the %ETH_SS_STATS set
+ * @testinfo_len: Number of results returned by the %ETHTOOL_TEST
+ * command; also the number of strings in the %ETH_SS_TEST set
+ * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM
+ * and %ETHTOOL_SEEPROM commands, in bytes
+ * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS
+ * command, in bytes
+ *
+ * Users can use the %ETHTOOL_GSSET_INFO command to get the number of
+ * strings in any string set (from Linux 2.6.34).
+ *
+ * Drivers should set at most @driver, @version, @fw_version and
+ * @bus_info in their get_drvinfo() implementation. The ethtool
+ * core fills in the other fields using other driver operations.
+ */
struct ethtool_drvinfo {
__u32 cmd;
- char driver[32]; /* driver short name, "tulip", "eepro100" */
- char version[32]; /* driver version string */
- char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
- char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
- /* For PCI devices, use pci_name(pci_dev). */
+ char driver[32];
+ char version[32];
+ char fw_version[ETHTOOL_FWVERS_LEN];
+ char bus_info[ETHTOOL_BUSINFO_LEN];
char reserved1[32];
char reserved2[12];
- /*
- * Some struct members below are filled in
- * using ops->get_sset_count(). Obtaining
- * this info from ethtool_drvinfo is now
- * deprecated; Use ETHTOOL_GSSET_INFO
- * instead.
- */
- __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
- __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
+ __u32 n_priv_flags;
+ __u32 n_stats;
__u32 testinfo_len;
- __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
- __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
+ __u32 eedump_len;
+ __u32 regdump_len;
};
#define SOPASS_MAX 6
-/* wake-on-lan settings */
+
+/**
+ * struct ethtool_wolinfo - Wake-On-Lan configuration
+ * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL
+ * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes.
+ * Read-only.
+ * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes.
+ * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE
+ * is set in @wolopts.
+ */
struct ethtool_wolinfo {
__u32 cmd;
__u32 supported;
__u32 wolopts;
- __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+ __u8 sopass[SOPASS_MAX];
};
/* for passing single values */
@@ -118,20 +209,51 @@ struct ethtool_value {
__u32 data;
};
-/* for passing big chunks of data */
+/**
+ * struct ethtool_regs - hardware register dump
+ * @cmd: Command number = %ETHTOOL_GREGS
+ * @version: Dump format version. This is driver-specific and may
+ * distinguish different chips/revisions. Drivers must use new
+ * version numbers whenever the dump format changes in an
+ * incompatible way.
+ * @len: On entry, the real length of @data. On return, the number of
+ * bytes used.
+ * @data: Buffer for the register dump
+ *
+ * Users should use %ETHTOOL_GDRVINFO to find the maximum length of
+ * a register dump for the interface. They must allocate the buffer
+ * immediately following this structure.
+ */
struct ethtool_regs {
__u32 cmd;
- __u32 version; /* driver-specific, indicates different chips/revs */
- __u32 len; /* bytes */
+ __u32 version;
+ __u32 len;
__u8 data[0];
};
-/* for passing EEPROM chunks */
+/**
+ * struct ethtool_eeprom - EEPROM dump
+ * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or
+ * %ETHTOOL_SEEPROM
+ * @magic: A 'magic cookie' value to guard against accidental changes.
+ * The value passed in to %ETHTOOL_SEEPROM must match the value
+ * returned by %ETHTOOL_GEEPROM for the same device. This is
+ * unused when @cmd is %ETHTOOL_GMODULEEEPROM.
+ * @offset: Offset within the EEPROM to begin reading/writing, in bytes
+ * @len: On entry, number of bytes to read/write. On successful
+ * return, number of bytes actually read/written. In case of
+ * error, this may indicate at what point the error occurred.
+ * @data: Buffer to read/write from
+ *
+ * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find
+ * the length of an on-board or module EEPROM, respectively. They
+ * must allocate the buffer immediately following this structure.
+ */
struct ethtool_eeprom {
__u32 cmd;
__u32 magic;
- __u32 offset; /* in bytes */
- __u32 len; /* in bytes */
+ __u32 offset;
+ __u32 len;
__u8 data[0];
};
@@ -229,17 +351,18 @@ struct ethtool_modinfo {
* @rate_sample_interval: How often to do adaptive coalescing packet rate
* sampling, measured in seconds. Must not be zero.
*
- * Each pair of (usecs, max_frames) fields specifies this exit
- * condition for interrupt coalescing:
+ * Each pair of (usecs, max_frames) fields specifies that interrupts
+ * should be coalesced until
* (usecs > 0 && time_since_first_completion >= usecs) ||
* (max_frames > 0 && completed_frames >= max_frames)
+ *
* It is illegal to set both usecs and max_frames to zero as this
* would cause interrupts to never be generated. To disable
* coalescing, set usecs = 0 and max_frames = 1.
*
* Some implementations ignore the value of max_frames and use the
- * condition:
- * time_since_first_completion >= usecs
+ * condition time_since_first_completion >= usecs
+ *
* This is deprecated. Drivers for hardware that does not support
* counting completions should validate that max_frames == !rx_usecs.
*
@@ -279,22 +402,37 @@ struct ethtool_coalesce {
__u32 rate_sample_interval;
};
-/* for configuring RX/TX ring parameters */
+/**
+ * struct ethtool_ringparam - RX/TX ring parameters
+ * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM
+ * @rx_max_pending: Maximum supported number of pending entries per
+ * RX ring. Read-only.
+ * @rx_mini_max_pending: Maximum supported number of pending entries
+ * per RX mini ring. Read-only.
+ * @rx_jumbo_max_pending: Maximum supported number of pending entries
+ * per RX jumbo ring. Read-only.
+ * @tx_max_pending: Maximum supported number of pending entries per
+ * TX ring. Read-only.
+ * @rx_pending: Current maximum number of pending entries per RX ring
+ * @rx_mini_pending: Current maximum number of pending entries per RX
+ * mini ring
+ * @rx_jumbo_pending: Current maximum number of pending entries per RX
+ * jumbo ring
+ * @tx_pending: Current maximum supported number of pending entries
+ * per TX ring
+ *
+ * If the interface does not have separate RX mini and/or jumbo rings,
+ * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0.
+ *
+ * There may also be driver-dependent minimum values for the number
+ * of entries per ring.
+ */
struct ethtool_ringparam {
- __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
-
- /* Read only attributes. These indicate the maximum number
- * of pending RX/TX ring entries the driver will allow the
- * user to set.
- */
+ __u32 cmd;
__u32 rx_max_pending;
__u32 rx_mini_max_pending;
__u32 rx_jumbo_max_pending;
__u32 tx_max_pending;
-
- /* Values changeable by the user. The valid values are
- * in the range 1 to the "*_max_pending" counterpart above.
- */
__u32 rx_pending;
__u32 rx_mini_pending;
__u32 rx_jumbo_pending;
@@ -329,51 +467,96 @@ struct ethtool_channels {
__u32 combined_count;
};
-/* for configuring link flow control parameters */
+/**
+ * struct ethtool_pauseparam - Ethernet pause (flow control) parameters
+ * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM
+ * @autoneg: Flag to enable autonegotiation of pause frame use
+ * @rx_pause: Flag to enable reception of pause frames
+ * @tx_pause: Flag to enable transmission of pause frames
+ *
+ * Drivers should reject a non-zero setting of @autoneg when
+ * autoneogotiation is disabled (or not supported) for the link.
+ *
+ * If the link is autonegotiated, drivers should use
+ * mii_advertise_flowctrl() or similar code to set the advertised
+ * pause frame capabilities based on the @rx_pause and @tx_pause flags,
+ * even if @autoneg is zero. They should also allow the advertised
+ * pause frame capabilities to be controlled directly through the
+ * advertising field of &struct ethtool_cmd.
+ *
+ * If @autoneg is non-zero, the MAC is configured to send and/or
+ * receive pause frames according to the result of autonegotiation.
+ * Otherwise, it is configured directly based on the @rx_pause and
+ * @tx_pause flags.
+ */
struct ethtool_pauseparam {
- __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
-
- /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
- * being true) the user may set 'autoneg' here non-zero to have the
- * pause parameters be auto-negotiated too. In such a case, the
- * {rx,tx}_pause values below determine what capabilities are
- * advertised.
- *
- * If 'autoneg' is zero or the link is not being auto-negotiated,
- * then {rx,tx}_pause force the driver to use/not-use pause
- * flow control.
- */
+ __u32 cmd;
__u32 autoneg;
__u32 rx_pause;
__u32 tx_pause;
};
#define ETH_GSTRING_LEN 32
+
+/**
+ * enum ethtool_stringset - string set ID
+ * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST
+ * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS
+ * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with
+ * %ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS
+ * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE;
+ * now deprecated
+ * @ETH_SS_FEATURES: Device feature names
+ */
enum ethtool_stringset {
ETH_SS_TEST = 0,
ETH_SS_STATS,
ETH_SS_PRIV_FLAGS,
- ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */
+ ETH_SS_NTUPLE_FILTERS,
ETH_SS_FEATURES,
};
-/* for passing string sets for data tagging */
+/**
+ * struct ethtool_gstrings - string set for data tagging
+ * @cmd: Command number = %ETHTOOL_GSTRINGS
+ * @string_set: String set ID; one of &enum ethtool_stringset
+ * @len: On return, the number of strings in the string set
+ * @data: Buffer for strings. Each string is null-padded to a size of
+ * %ETH_GSTRING_LEN.
+ *
+ * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in
+ * the string set. They must allocate a buffer of the appropriate
+ * size immediately following this structure.
+ */
struct ethtool_gstrings {
- __u32 cmd; /* ETHTOOL_GSTRINGS */
- __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
- __u32 len; /* number of strings in the string set */
+ __u32 cmd;
+ __u32 string_set;
+ __u32 len;
__u8 data[0];
};
+/**
+ * struct ethtool_sset_info - string set information
+ * @cmd: Command number = %ETHTOOL_GSSET_INFO
+ * @sset_mask: On entry, a bitmask of string sets to query, with bits
+ * numbered according to &enum ethtool_stringset. On return, a
+ * bitmask of those string sets queried that are supported.
+ * @data: Buffer for string set sizes. On return, this contains the
+ * size of each string set that was queried and supported, in
+ * order of ID.
+ *
+ * Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on
+ * return @sset_mask == 0x6 (sets 1, 2). Then @data[0] contains the
+ * size of set 1 and @data[1] contains the size of set 2.
+ *
+ * Users must allocate a buffer of the appropriate size (4 * number of
+ * sets queried) immediately following this structure.
+ */
struct ethtool_sset_info {
- __u32 cmd; /* ETHTOOL_GSSET_INFO */
+ __u32 cmd;
__u32 reserved;
- __u64 sset_mask; /* input: each bit selects an sset to query */
- /* output: each bit a returned sset */
- __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
- in sset_mask. One bit implies one
- __u32, two bits implies two
- __u32's, etc. */
+ __u64 sset_mask;
+ __u32 data[0];
};
/**
@@ -393,24 +576,58 @@ enum ethtool_test_flags {
ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3),
};
-/* for requesting NIC test and getting results*/
+/**
+ * struct ethtool_test - device self-test invocation
+ * @cmd: Command number = %ETHTOOL_TEST
+ * @flags: A bitmask of flags from &enum ethtool_test_flags. Some
+ * flags may be set by the user on entry; others may be set by
+ * the driver on return.
+ * @len: On return, the number of test results
+ * @data: Array of test results
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of test results that will be returned. They must allocate a
+ * buffer of the appropriate size (8 * number of results) immediately
+ * following this structure.
+ */
struct ethtool_test {
- __u32 cmd; /* ETHTOOL_TEST */
- __u32 flags; /* ETH_TEST_FL_xxx */
+ __u32 cmd;
+ __u32 flags;
__u32 reserved;
- __u32 len; /* result length, in number of u64 elements */
+ __u32 len;
__u64 data[0];
};
-/* for dumping NIC-specific statistics */
+/**
+ * struct ethtool_stats - device-specific statistics
+ * @cmd: Command number = %ETHTOOL_GSTATS
+ * @n_stats: On return, the number of statistics
+ * @data: Array of statistics
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of statistics that will be returned. They must allocate a
+ * buffer of the appropriate size (8 * number of statistics)
+ * immediately following this structure.
+ */
struct ethtool_stats {
- __u32 cmd; /* ETHTOOL_GSTATS */
- __u32 n_stats; /* number of u64's being returned */
+ __u32 cmd;
+ __u32 n_stats;
__u64 data[0];
};
+/**
+ * struct ethtool_perm_addr - permanent hardware address
+ * @cmd: Command number = %ETHTOOL_GPERMADDR
+ * @size: On entry, the size of the buffer. On return, the size of the
+ * address. The command fails if the buffer is too small.
+ * @data: Buffer for the address
+ *
+ * Users must allocate the buffer immediately following this structure.
+ * A buffer size of %MAX_ADDR_LEN should be sufficient for any address
+ * type.
+ */
struct ethtool_perm_addr {
- __u32 cmd; /* ETHTOOL_GPERMADDR */
+ __u32 cmd;
__u32 size;
__u8 data[0];
};
@@ -593,7 +810,7 @@ struct ethtool_rx_flow_spec {
* %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
* location, and may remove a rule at a later location (lower
* priority) that matches exactly the same set of flows. The special
- * values are: %RX_CLS_LOC_ANY, selecting any location;
+ * values are %RX_CLS_LOC_ANY, selecting any location;
* %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
* priority); and %RX_CLS_LOC_LAST, selecting the last suitable
* location (minimum priority). Additional special values may be
@@ -704,9 +921,6 @@ struct ethtool_flash {
* for %ETHTOOL_GET_DUMP_FLAG command
* @data: data collected for get dump data operation
*/
-
-#define ETH_FW_DUMP_DISABLE 0
-
struct ethtool_dump {
__u32 cmd;
__u32 version;
@@ -715,6 +929,8 @@ struct ethtool_dump {
__u8 data[0];
};
+#define ETH_FW_DUMP_DISABLE 0
+
/* for returning and changing feature sets */
/**
@@ -734,8 +950,9 @@ struct ethtool_get_features_block {
/**
* struct ethtool_gfeatures - command to get state of device's features
* @cmd: command number = %ETHTOOL_GFEATURES
- * @size: in: number of elements in the features[] array;
- * out: number of elements in features[] needed to hold all features
+ * @size: On entry, the number of elements in the features[] array;
+ * on return, the number of elements in features[] needed to hold
+ * all features
* @features: state of features
*/
struct ethtool_gfeatures {
@@ -905,7 +1122,6 @@ enum ethtool_sfeatures_retval_bits {
#define SPARC_ETH_GSET ETHTOOL_GSET
#define SPARC_ETH_SSET ETHTOOL_SSET
-/* Indicates what features are supported by the interface. */
#define SUPPORTED_10baseT_Half (1 << 0)
#define SUPPORTED_10baseT_Full (1 << 1)
#define SUPPORTED_100baseT_Half (1 << 2)
@@ -934,7 +1150,6 @@ enum ethtool_sfeatures_retval_bits {
#define SUPPORTED_40000baseSR4_Full (1 << 25)
#define SUPPORTED_40000baseLR4_Full (1 << 26)
-/* Indicates what features are advertised by the interface. */
#define ADVERTISED_10baseT_Half (1 << 0)
#define ADVERTISED_10baseT_Full (1 << 1)
#define ADVERTISED_100baseT_Half (1 << 2)
@@ -999,9 +1214,7 @@ enum ethtool_sfeatures_retval_bits {
#define XCVR_DUMMY2 0x03
#define XCVR_DUMMY3 0x04
-/* Enable or disable autonegotiation. If this is set to enable,
- * the forced link modes above are completely ignored.
- */
+/* Enable or disable autonegotiation. */
#define AUTONEG_DISABLE 0x00
#define AUTONEG_ENABLE 0x01
diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h
index d758163b0e43..9cf2394f0bcf 100644
--- a/include/uapi/linux/if.h
+++ b/include/uapi/linux/if.h
@@ -27,65 +27,91 @@
#define IFALIASZ 256
#include <linux/hdlc/ioctl.h>
-/* Standard interface flags (netdevice->flags). */
-#define IFF_UP 0x1 /* interface is up */
-#define IFF_BROADCAST 0x2 /* broadcast address valid */
-#define IFF_DEBUG 0x4 /* turn on debugging */
-#define IFF_LOOPBACK 0x8 /* is a loopback net */
-#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
-#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
-#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */
-#define IFF_NOARP 0x80 /* no ARP protocol */
-#define IFF_PROMISC 0x100 /* receive all packets */
-#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/
-
-#define IFF_MASTER 0x400 /* master of a load balancer */
-#define IFF_SLAVE 0x800 /* slave of a load balancer */
-
-#define IFF_MULTICAST 0x1000 /* Supports multicast */
-
-#define IFF_PORTSEL 0x2000 /* can set media type */
-#define IFF_AUTOMEDIA 0x4000 /* auto media select active */
-#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/
-
-#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */
-#define IFF_DORMANT 0x20000 /* driver signals dormant */
+/**
+ * enum net_device_flags - &struct net_device flags
+ *
+ * These are the &struct net_device flags, they can be set by drivers, the
+ * kernel and some can be triggered by userspace. Userspace can query and
+ * set these flags using userspace utilities but there is also a sysfs
+ * entry available for all dev flags which can be queried and set. These flags
+ * are shared for all types of net_devices. The sysfs entries are available
+ * via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs
+ * are annotated below, note that only a few flags can be toggled and some
+ * other flags are always always preserved from the original net_device flags
+ * even if you try to set them via sysfs. Flags which are always preserved
+ * are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile
+ * are annotated below as such.
+ *
+ * You should have a pretty good reason to be extending these flags.
+ *
+ * @IFF_UP: interface is up. Can be toggled through sysfs.
+ * @IFF_BROADCAST: broadcast address valid. Volatile.
+ * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs.
+ * @IFF_LOOPBACK: is a loopback net. Volatile.
+ * @IFF_POINTOPOINT: interface is has p-p link. Volatile.
+ * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs.
+ * Volatile.
+ * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile.
+ * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile.
+ * @IFF_PROMISC: receive all packets. Can be toggled through sysfs.
+ * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through
+ * sysfs.
+ * @IFF_MASTER: master of a load balancer. Volatile.
+ * @IFF_SLAVE: slave of a load balancer. Volatile.
+ * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs.
+ * @IFF_PORTSEL: can set media type. Can be toggled through sysfs.
+ * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs.
+ * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled
+ * through sysfs.
+ * @IFF_LOWER_UP: driver signals L1 up. Volatile.
+ * @IFF_DORMANT: driver signals dormant. Volatile.
+ * @IFF_ECHO: echo sent packets. Volatile.
+ */
+enum net_device_flags {
+ IFF_UP = 1<<0, /* sysfs */
+ IFF_BROADCAST = 1<<1, /* volatile */
+ IFF_DEBUG = 1<<2, /* sysfs */
+ IFF_LOOPBACK = 1<<3, /* volatile */
+ IFF_POINTOPOINT = 1<<4, /* volatile */
+ IFF_NOTRAILERS = 1<<5, /* sysfs */
+ IFF_RUNNING = 1<<6, /* volatile */
+ IFF_NOARP = 1<<7, /* sysfs */
+ IFF_PROMISC = 1<<8, /* sysfs */
+ IFF_ALLMULTI = 1<<9, /* sysfs */
+ IFF_MASTER = 1<<10, /* volatile */
+ IFF_SLAVE = 1<<11, /* volatile */
+ IFF_MULTICAST = 1<<12, /* sysfs */
+ IFF_PORTSEL = 1<<13, /* sysfs */
+ IFF_AUTOMEDIA = 1<<14, /* sysfs */
+ IFF_DYNAMIC = 1<<15, /* sysfs */
+ IFF_LOWER_UP = 1<<16, /* volatile */
+ IFF_DORMANT = 1<<17, /* volatile */
+ IFF_ECHO = 1<<18, /* volatile */
+};
-#define IFF_ECHO 0x40000 /* echo sent packets */
+#define IFF_UP IFF_UP
+#define IFF_BROADCAST IFF_BROADCAST
+#define IFF_DEBUG IFF_DEBUG
+#define IFF_LOOPBACK IFF_LOOPBACK
+#define IFF_POINTOPOINT IFF_POINTOPOINT
+#define IFF_NOTRAILERS IFF_NOTRAILERS
+#define IFF_RUNNING IFF_RUNNING
+#define IFF_NOARP IFF_NOARP
+#define IFF_PROMISC IFF_PROMISC
+#define IFF_ALLMULTI IFF_ALLMULTI
+#define IFF_MASTER IFF_MASTER
+#define IFF_SLAVE IFF_SLAVE
+#define IFF_MULTICAST IFF_MULTICAST
+#define IFF_PORTSEL IFF_PORTSEL
+#define IFF_AUTOMEDIA IFF_AUTOMEDIA
+#define IFF_DYNAMIC IFF_DYNAMIC
+#define IFF_LOWER_UP IFF_LOWER_UP
+#define IFF_DORMANT IFF_DORMANT
+#define IFF_ECHO IFF_ECHO
#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
-/* Private (from user) interface flags (netdevice->priv_flags). */
-#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */
-#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
-#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
-#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
-#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
-#define IFF_BONDING 0x20 /* bonding master or slave */
-#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
-#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */
-#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */
-#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */
-#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to
- * release skb->dst
- */
-#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */
-#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */
-#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */
-#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */
-#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch
- * datapath port */
-#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing
- * skbs on transmit */
-#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */
-#define IFF_TEAM_PORT 0x40000 /* device used as team port */
-#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */
-#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address
- * change when it's running */
-#define IFF_MACVLAN 0x200000 /* Macvlan device */
-
-
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index 2ce0f6a78fa5..0f8210b8e0bc 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -68,11 +68,11 @@
#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */
#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol
* defined in draft-wilson-wrec-wccp-v2-00.txt */
-#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
-#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */
#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */
#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
+#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
+#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */
#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
* over Ethernet
@@ -89,6 +89,8 @@
#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
#define ETH_P_TDLS 0x890D /* TDLS */
#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
+#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */
+#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */
#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 16410b6e7819..9a7f7ace6649 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -144,6 +144,7 @@ enum {
IFLA_NUM_RX_QUEUES,
IFLA_CARRIER,
IFLA_PHYS_PORT_ID,
+ IFLA_CARRIER_CHANGES,
__IFLA_MAX
};
diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
index 393c5de09d42..c33a65e3d62c 100644
--- a/include/uapi/linux/in.h
+++ b/include/uapi/linux/in.h
@@ -120,6 +120,10 @@ struct in_addr {
* this socket to prevent accepting spoofed ones.
*/
#define IP_PMTUDISC_INTERFACE 4
+/* weaker version of IP_PMTUDISC_INTERFACE, which allos packets to get
+ * fragmented if they exeed the interface mtu
+ */
+#define IP_PMTUDISC_OMIT 5
#define IP_MULTICAST_IF 32
#define IP_MULTICAST_TTL 33
diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h
index e9a1d2d973b6..0d8e0f0342dc 100644
--- a/include/uapi/linux/in6.h
+++ b/include/uapi/linux/in6.h
@@ -185,6 +185,10 @@ struct in6_flowlabel_req {
* also see comments on IP_PMTUDISC_INTERFACE
*/
#define IPV6_PMTUDISC_INTERFACE 4
+/* weaker version of IPV6_PMTUDISC_INTERFACE, which allows packets to
+ * get fragmented if they exceed the interface mtu
+ */
+#define IPV6_PMTUDISC_OMIT 5
/* Flowlabel */
#define IPV6_FLOWLABEL_MGR 32
diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h
new file mode 100644
index 000000000000..bc9abfe88c9a
--- /dev/null
+++ b/include/uapi/linux/mpls.h
@@ -0,0 +1,34 @@
+#ifndef _UAPI_MPLS_H
+#define _UAPI_MPLS_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/* Reference: RFC 5462, RFC 3032
+ *
+ * 0 1 2 3
+ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | Label | TC |S| TTL |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * Label: Label Value, 20 bits
+ * TC: Traffic Class field, 3 bits
+ * S: Bottom of Stack, 1 bit
+ * TTL: Time to Live, 8 bits
+ */
+
+struct mpls_label {
+ __be32 entry;
+};
+
+#define MPLS_LS_LABEL_MASK 0xFFFFF000
+#define MPLS_LS_LABEL_SHIFT 12
+#define MPLS_LS_TC_MASK 0x00000E00
+#define MPLS_LS_TC_SHIFT 9
+#define MPLS_LS_S_MASK 0x00000100
+#define MPLS_LS_S_SHIFT 8
+#define MPLS_LS_TTL_MASK 0x000000FF
+#define MPLS_LS_TTL_SHIFT 0
+
+#endif /* _UAPI_MPLS_H */
diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h
index 6b9500bc2d56..fdfbd1c17065 100644
--- a/include/uapi/linux/netdevice.h
+++ b/include/uapi/linux/netdevice.h
@@ -49,5 +49,11 @@ enum {
IF_PORT_100BASEFX
};
+/* hardware address assignment types */
+#define NET_ADDR_PERM 0 /* address is permanent (default) */
+#define NET_ADDR_RANDOM 1 /* address is generated randomly */
+#define NET_ADDR_STOLEN 2 /* address is stolen from other device */
+#define NET_ADDR_SET 3 /* address is set using
+ * dev_set_mac_address() */
#endif /* _UAPI_LINUX_NETDEVICE_H */
diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h
index 25d3b2f79c02..78c2f2e79920 100644
--- a/include/uapi/linux/netfilter/ipset/ip_set.h
+++ b/include/uapi/linux/netfilter/ipset/ip_set.h
@@ -82,6 +82,8 @@ enum {
IPSET_ATTR_PROTO, /* 7 */
IPSET_ATTR_CADT_FLAGS, /* 8 */
IPSET_ATTR_CADT_LINENO = IPSET_ATTR_LINENO, /* 9 */
+ IPSET_ATTR_MARK, /* 10 */
+ IPSET_ATTR_MARKMASK, /* 11 */
/* Reserve empty slots */
IPSET_ATTR_CADT_MAX = 16,
/* Create-only specific attributes */
@@ -144,6 +146,7 @@ enum ipset_errno {
IPSET_ERR_IPADDR_IPV6,
IPSET_ERR_COUNTER,
IPSET_ERR_COMMENT,
+ IPSET_ERR_INVALID_MARKMASK,
/* Type specific error codes */
IPSET_ERR_TYPE_SPECIFIC = 4352,
@@ -182,9 +185,18 @@ enum ipset_cadt_flags {
IPSET_FLAG_WITH_COUNTERS = (1 << IPSET_FLAG_BIT_WITH_COUNTERS),
IPSET_FLAG_BIT_WITH_COMMENT = 4,
IPSET_FLAG_WITH_COMMENT = (1 << IPSET_FLAG_BIT_WITH_COMMENT),
+ IPSET_FLAG_BIT_WITH_FORCEADD = 5,
+ IPSET_FLAG_WITH_FORCEADD = (1 << IPSET_FLAG_BIT_WITH_FORCEADD),
IPSET_FLAG_CADT_MAX = 15,
};
+/* The flag bits which correspond to the non-extension create flags */
+enum ipset_create_flags {
+ IPSET_CREATE_FLAG_BIT_FORCEADD = 0,
+ IPSET_CREATE_FLAG_FORCEADD = (1 << IPSET_CREATE_FLAG_BIT_FORCEADD),
+ IPSET_CREATE_FLAG_BIT_MAX = 7,
+};
+
/* Commands with settype-specific attributes */
enum ipset_adt {
IPSET_ADD,
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index 83c985a6170b..c88ccbfda5f1 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -1,7 +1,8 @@
#ifndef _LINUX_NF_TABLES_H
#define _LINUX_NF_TABLES_H
-#define NFT_CHAIN_MAXNAMELEN 32
+#define NFT_CHAIN_MAXNAMELEN 32
+#define NFT_USERDATA_MAXLEN 256
enum nft_registers {
NFT_REG_VERDICT,
@@ -156,6 +157,7 @@ enum nft_chain_attributes {
* @NFTA_RULE_EXPRESSIONS: list of expressions (NLA_NESTED: nft_expr_attributes)
* @NFTA_RULE_COMPAT: compatibility specifications of the rule (NLA_NESTED: nft_rule_compat_attributes)
* @NFTA_RULE_POSITION: numeric handle of the previous rule (NLA_U64)
+ * @NFTA_RULE_USERDATA: user data (NLA_BINARY, NFT_USERDATA_MAXLEN)
*/
enum nft_rule_attributes {
NFTA_RULE_UNSPEC,
@@ -165,6 +167,7 @@ enum nft_rule_attributes {
NFTA_RULE_EXPRESSIONS,
NFTA_RULE_COMPAT,
NFTA_RULE_POSITION,
+ NFTA_RULE_USERDATA,
__NFTA_RULE_MAX
};
#define NFTA_RULE_MAX (__NFTA_RULE_MAX - 1)
@@ -601,6 +604,7 @@ enum nft_ct_keys {
NFT_CT_PROTOCOL,
NFT_CT_PROTO_SRC,
NFT_CT_PROTO_DST,
+ NFT_CT_LABELS,
};
/**
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index 6ad6cc03ccd3..9789dc95b6a8 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -150,6 +150,8 @@ enum nfc_commands {
* @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED)
* @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status
* @NFC_ATTR_APDU: Secure element APDU
+ * @NFC_ATTR_TARGET_ISO15693_DSFID: ISO 15693 Data Storage Format Identifier
+ * @NFC_ATTR_TARGET_ISO15693_UID: ISO 15693 Unique Identifier
*/
enum nfc_attrs {
NFC_ATTR_UNSPEC,
@@ -178,6 +180,8 @@ enum nfc_attrs {
NFC_ATTR_SE_AID,
NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS,
NFC_ATTR_SE_APDU,
+ NFC_ATTR_TARGET_ISO15693_DSFID,
+ NFC_ATTR_TARGET_ISO15693_UID,
/* private: internal use only */
__NFC_ATTR_AFTER_LAST
};
@@ -200,6 +204,7 @@ enum nfc_sdp_attr {
#define NFC_SENSF_RES_MAXSIZE 18
#define NFC_GB_MAXSIZE 48
#define NFC_FIRMWARE_NAME_MAXSIZE 32
+#define NFC_ISO15693_UID_MAXSIZE 8
/* NFC protocols */
#define NFC_PROTO_JEWEL 1
@@ -208,8 +213,9 @@ enum nfc_sdp_attr {
#define NFC_PROTO_ISO14443 4
#define NFC_PROTO_NFC_DEP 5
#define NFC_PROTO_ISO14443_B 6
+#define NFC_PROTO_ISO15693 7
-#define NFC_PROTO_MAX 7
+#define NFC_PROTO_MAX 8
/* NFC communication modes */
#define NFC_COMM_ACTIVE 0
@@ -227,6 +233,7 @@ enum nfc_sdp_attr {
#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443)
#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP)
#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B)
+#define NFC_PROTO_ISO15693_MASK (1 << NFC_PROTO_ISO15693)
/* NFC Secure Elements */
#define NFC_SE_UICC 0x1
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 91054fd660e0..1ba9d626aa83 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -303,8 +303,9 @@
* passed, all channels allowed for the current regulatory domain
* are used. Extra IEs can also be passed from the userspace by
* using the %NL80211_ATTR_IE attribute.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
- * if scheduled scan is not running.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+ * scheduled scan is not running. The caller may assume that as soon
+ * as the call returns, it is safe to start a new scheduled scan again.
* @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
* results available.
* @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
@@ -418,8 +419,18 @@
* %NL80211_ATTR_SSID attribute, and can optionally specify the association
* IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
* %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
+ * %NL80211_ATTR_WIPHY_FREQ_HINT.
+ * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
+ * restrictions on BSS selection, i.e., they effectively prevent roaming
+ * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
+ * can be included to provide a recommendation of the initial BSS while
+ * allowing the driver to roam to other BSSes within the ESS and also to
+ * ignore this recommendation if the indicated BSS is not ideal. Only one
+ * set of BSSID,frequency parameters is used (i.e., either the enforcing
+ * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
+ * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
* Background scan period can optionally be
* specified in %NL80211_ATTR_BG_SCAN_PERIOD,
* if not specified default background scan configuration
@@ -1555,6 +1566,19 @@ enum nl80211_commands {
* data is in the format defined for the payload of the QoS Map Set element
* in IEEE Std 802.11-2012, 8.4.2.97.
*
+ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
+ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
+ *
+ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
+ * associated stations are supported in AP mode (including P2P GO); u32.
+ * Since drivers may not have a fixed limit on the maximum number (e.g.,
+ * other concurrent operations may affect this), drivers are allowed to
+ * advertise values that cannot always be met. In such cases, an attempt
+ * to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
+ *
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
+ * As specified in the &enum nl80211_tdls_peer_capability.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1883,6 +1907,13 @@ enum nl80211_attrs {
NL80211_ATTR_QOS_MAP,
+ NL80211_ATTR_MAC_HINT,
+ NL80211_ATTR_WIPHY_FREQ_HINT,
+
+ NL80211_ATTR_MAX_AP_ASSOC_STA,
+
+ NL80211_ATTR_TDLS_PEER_CAPABILITY,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2304,6 +2335,7 @@ enum nl80211_band_attr {
* @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
* using this channel as the primary or any of the secondary channels
* isn't possible
+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -2322,6 +2354,7 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
NL80211_FREQUENCY_ATTR_NO_80MHZ,
NL80211_FREQUENCY_ATTR_NO_160MHZ,
+ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2412,12 +2445,14 @@ enum nl80211_reg_type {
* in KHz. This is not a center a frequency but an actual regulatory
* band edge.
* @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- * frequency range, in KHz.
+ * frequency range, in KHz.
* @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
* for a given frequency range. The value is in mBi (100 * dBi).
* If you don't have one then don't send this.
* @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
* a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * If not present or 0 default CAC time will be used.
* @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
* currently defined
* @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
@@ -2433,6 +2468,8 @@ enum nl80211_reg_rule_attr {
NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
NL80211_ATTR_POWER_RULE_MAX_EIRP,
+ NL80211_ATTR_DFS_CAC_TIME,
+
/* keep last */
__NL80211_REG_RULE_ATTR_AFTER_LAST,
NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
@@ -2442,9 +2479,15 @@ enum nl80211_reg_rule_attr {
* enum nl80211_sched_scan_match_attr - scheduled scan match attributes
* @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
- * only report BSS with matching SSID.
+ * only report BSS with matching SSID.
* @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
- * BSS in scan results. Filtering is turned off if not specified.
+ * BSS in scan results. Filtering is turned off if not specified. Note that
+ * if this attribute is in a match set of its own, then it is treated as
+ * the default value for all matchsets with an SSID, rather than being a
+ * matchset of its own without an RSSI filter. This is due to problems with
+ * how this API was implemented in the past. Also, due to the same problem,
+ * the only way to create a matchset with only an RSSI filter (with this
+ * attribute) is if there's only a single matchset with the RSSI attribute.
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -2477,6 +2520,9 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
* this includes probe requests or modes of operation that require
* beaconing.
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ * base on contiguous rules and wider channels will be allowed to cross
+ * multiple contiguous/overlapping frequency ranges.
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
@@ -2488,6 +2534,7 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_PTMP_ONLY = 1<<6,
NL80211_RRF_NO_IR = 1<<7,
__NL80211_RRF_NO_IBSS = 1<<8,
+ NL80211_RRF_AUTO_BW = 1<<11,
};
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
@@ -3131,6 +3178,7 @@ enum nl80211_key_attributes {
* in an array of MCS numbers.
* @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
* see &struct nl80211_txrate_vht
+ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
* @__NL80211_TXRATE_AFTER_LAST: internal
* @NL80211_TXRATE_MAX: highest TX rate attribute
*/
@@ -3139,6 +3187,7 @@ enum nl80211_tx_rate_attributes {
NL80211_TXRATE_LEGACY,
NL80211_TXRATE_HT,
NL80211_TXRATE_VHT,
+ NL80211_TXRATE_GI,
/* keep last */
__NL80211_TXRATE_AFTER_LAST,
@@ -3156,6 +3205,12 @@ struct nl80211_txrate_vht {
__u16 mcs[NL80211_VHT_NSS_MAX];
};
+enum nl80211_txrate_gi {
+ NL80211_TXRATE_DEFAULT_GI,
+ NL80211_TXRATE_FORCE_SGI,
+ NL80211_TXRATE_FORCE_LGI,
+};
+
/**
* enum nl80211_band - Frequency band
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
@@ -3801,11 +3856,6 @@ enum nl80211_ap_sme_features {
* @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
* to work properly to suppport receiving regulatory hints from
* cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
- * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
- * in the interface combinations, even when it's only used for scan
- * and remain-on-channel. This could be due to, for example, the
- * remain-on-channel implementation requiring a channel context.
* @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
* equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
* mode
@@ -3847,7 +3897,7 @@ enum nl80211_feature_flags {
NL80211_FEATURE_HT_IBSS = 1 << 1,
NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
- NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
+ /* bit 4 is reserved - don't use */
NL80211_FEATURE_SAE = 1 << 5,
NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6,
NL80211_FEATURE_SCAN_FLUSH = 1 << 7,
@@ -4037,4 +4087,20 @@ struct nl80211_vendor_cmd_info {
__u32 subcmd;
};
+/**
+ * enum nl80211_tdls_peer_capability - TDLS peer flags.
+ *
+ * Used by tdls_mgmt() to determine which conditional elements need
+ * to be added to TDLS Setup frames.
+ *
+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ */
+enum nl80211_tdls_peer_capability {
+ NL80211_TDLS_PEER_HT = 1<<0,
+ NL80211_TDLS_PEER_VHT = 1<<1,
+ NL80211_TDLS_PEER_WMM = 1<<2,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/uapi/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h
index 0b80c806631f..ada7f0171ccc 100644
--- a/include/uapi/linux/pfkeyv2.h
+++ b/include/uapi/linux/pfkeyv2.h
@@ -235,6 +235,18 @@ struct sadb_x_kmaddress {
} __attribute__((packed));
/* sizeof(struct sadb_x_kmaddress) == 8 */
+/* To specify the SA dump filter */
+struct sadb_x_filter {
+ __u16 sadb_x_filter_len;
+ __u16 sadb_x_filter_exttype;
+ __u32 sadb_x_filter_saddr[4];
+ __u32 sadb_x_filter_daddr[4];
+ __u16 sadb_x_filter_family;
+ __u8 sadb_x_filter_splen;
+ __u8 sadb_x_filter_dplen;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_filter) == 40 */
+
/* Message types */
#define SADB_RESERVED 0
#define SADB_GETSPI 1
@@ -358,7 +370,8 @@ struct sadb_x_kmaddress {
#define SADB_X_EXT_SEC_CTX 24
/* Used with MIGRATE to pass @ to IKE for negotiation */
#define SADB_X_EXT_KMADDRESS 25
-#define SADB_EXT_MAX 25
+#define SADB_X_EXT_FILTER 26
+#define SADB_EXT_MAX 26
/* Identity Extension values */
#define SADB_IDENTTYPE_RESERVED 0
diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h
index b65c834f83e9..f0b7bfe5da92 100644
--- a/include/uapi/linux/ptp_clock.h
+++ b/include/uapi/linux/ptp_clock.h
@@ -50,7 +50,8 @@ struct ptp_clock_caps {
int n_ext_ts; /* Number of external time stamp channels. */
int n_per_out; /* Number of programmable periodic signals. */
int pps; /* Whether the clock supports a PPS callback. */
- int rsv[15]; /* Reserved for future use. */
+ int n_pins; /* Number of input/output pins. */
+ int rsv[14]; /* Reserved for future use. */
};
struct ptp_extts_request {
@@ -80,6 +81,40 @@ struct ptp_sys_offset {
struct ptp_clock_time ts[2 * PTP_MAX_SAMPLES + 1];
};
+enum ptp_pin_function {
+ PTP_PF_NONE,
+ PTP_PF_EXTTS,
+ PTP_PF_PEROUT,
+ PTP_PF_PHYSYNC,
+};
+
+struct ptp_pin_desc {
+ /*
+ * Hardware specific human readable pin name. This field is
+ * set by the kernel during the PTP_PIN_GETFUNC ioctl and is
+ * ignored for the PTP_PIN_SETFUNC ioctl.
+ */
+ char name[64];
+ /*
+ * Pin index in the range of zero to ptp_clock_caps.n_pins - 1.
+ */
+ unsigned int index;
+ /*
+ * Which of the PTP_PF_xxx functions to use on this pin.
+ */
+ unsigned int func;
+ /*
+ * The specific channel to use for this function.
+ * This corresponds to the 'index' field of the
+ * PTP_EXTTS_REQUEST and PTP_PEROUT_REQUEST ioctls.
+ */
+ unsigned int chan;
+ /*
+ * Reserved for future use.
+ */
+ unsigned int rsv[5];
+};
+
#define PTP_CLK_MAGIC '='
#define PTP_CLOCK_GETCAPS _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps)
@@ -87,6 +122,8 @@ struct ptp_sys_offset {
#define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request)
#define PTP_ENABLE_PPS _IOW(PTP_CLK_MAGIC, 4, int)
#define PTP_SYS_OFFSET _IOW(PTP_CLK_MAGIC, 5, struct ptp_sys_offset)
+#define PTP_PIN_GETFUNC _IOWR(PTP_CLK_MAGIC, 6, struct ptp_pin_desc)
+#define PTP_PIN_SETFUNC _IOW(PTP_CLK_MAGIC, 7, struct ptp_pin_desc)
struct ptp_extts_event {
struct ptp_clock_time t; /* Time event occured. */
diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h
index bbaba22f2d1b..df40137f33dd 100644
--- a/include/uapi/linux/snmp.h
+++ b/include/uapi/linux/snmp.h
@@ -252,6 +252,7 @@ enum
LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */
LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */
LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */
+ LINUX_MIB_TCPFASTOPENACTIVEFAIL, /* TCPFastOpenActiveFail */
LINUX_MIB_TCPFASTOPENPASSIVE, /* TCPFastOpenPassive*/
LINUX_MIB_TCPFASTOPENPASSIVEFAIL, /* TCPFastOpenPassiveFail */
LINUX_MIB_TCPFASTOPENLISTENOVERFLOW, /* TCPFastOpenListenOverflow */
@@ -259,6 +260,11 @@ enum
LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES, /* TCPSpuriousRtxHostQueues */
LINUX_MIB_BUSYPOLLRXPACKETS, /* BusyPollRxPackets */
LINUX_MIB_TCPAUTOCORKING, /* TCPAutoCorking */
+ LINUX_MIB_TCPFROMZEROWINDOWADV, /* TCPFromZeroWindowAdv */
+ LINUX_MIB_TCPTOZEROWINDOWADV, /* TCPToZeroWindowAdv */
+ LINUX_MIB_TCPWANTZEROWINDOWADV, /* TCPWantZeroWindowAdv */
+ LINUX_MIB_TCPSYNRETRANS, /* TCPSynRetrans */
+ LINUX_MIB_TCPORIGDATASENT, /* TCPOrigDataSent */
__LINUX_MIB_MAX
};
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
index 377f1e59411d..3b9718328d8b 100644
--- a/include/uapi/linux/tcp.h
+++ b/include/uapi/linux/tcp.h
@@ -186,6 +186,9 @@ struct tcp_info {
__u32 tcpi_rcv_space;
__u32 tcpi_total_retrans;
+
+ __u64 tcpi_pacing_rate;
+ __u64 tcpi_max_pacing_rate;
};
/* for TCP_MD5SIG socket option */
diff --git a/include/uapi/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h
index 54a37b13f2c4..93533926035c 100644
--- a/include/uapi/linux/tcp_metrics.h
+++ b/include/uapi/linux/tcp_metrics.h
@@ -11,12 +11,15 @@
#define TCP_METRICS_GENL_VERSION 0x1
enum tcp_metric_index {
- TCP_METRIC_RTT,
- TCP_METRIC_RTTVAR,
+ TCP_METRIC_RTT, /* in ms units */
+ TCP_METRIC_RTTVAR, /* in ms units */
TCP_METRIC_SSTHRESH,
TCP_METRIC_CWND,
TCP_METRIC_REORDERING,
+ TCP_METRIC_RTT_US, /* in usec units */
+ TCP_METRIC_RTTVAR_US, /* in usec units */
+
/* Always last. */
__TCP_METRIC_MAX,
};
diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h
index f35aa0a338c7..b6a9cdd6e096 100644
--- a/include/uapi/linux/usb/cdc.h
+++ b/include/uapi/linux/usb/cdc.h
@@ -56,6 +56,7 @@
#define USB_CDC_OBEX_TYPE 0x15
#define USB_CDC_NCM_TYPE 0x1a
#define USB_CDC_MBIM_TYPE 0x1b
+#define USB_CDC_MBIM_EXTENDED_TYPE 0x1c
/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */
struct usb_cdc_header_desc {
@@ -205,6 +206,17 @@ struct usb_cdc_mbim_desc {
__u8 bmNetworkCapabilities;
} __attribute__ ((packed));
+/* "MBIM Extended Functional Descriptor" from CDC MBIM spec 1.0 errata-1 */
+struct usb_cdc_mbim_extended_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdMBIMExtendedVersion;
+ __u8 bMaxOutstandingCommandMessages;
+ __le16 wMTU;
+} __attribute__ ((packed));
+
/*-------------------------------------------------------------------------*/
/*
diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h
index a8cd6a4a2970..25e5dd916ba4 100644
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -298,6 +298,8 @@ enum xfrm_attr_type_t {
XFRMA_TFCPAD, /* __u32 */
XFRMA_REPLAY_ESN_VAL, /* struct xfrm_replay_esn */
XFRMA_SA_EXTRA_FLAGS, /* __u32 */
+ XFRMA_PROTO, /* __u8 */
+ XFRMA_ADDRESS_FILTER, /* struct xfrm_address_filter */
__XFRMA_MAX
#define XFRMA_MAX (__XFRMA_MAX - 1)
@@ -474,6 +476,14 @@ struct xfrm_user_mapping {
__be16 new_sport;
};
+struct xfrm_address_filter {
+ xfrm_address_t saddr;
+ xfrm_address_t daddr;
+ __u16 family;
+ __u8 splen;
+ __u8 dplen;
+};
+
#ifndef __KERNEL__
/* backwards compatibility for userspace */
#define XFRMGRP_ACQUIRE 1
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 02:56:26 +0300