diff options
Diffstat (limited to 'include/uapi/linux')
| -rw-r--r-- | include/uapi/linux/bpf.h | 96 | ||||
| -rw-r--r-- | include/uapi/linux/btf.h | 17 | ||||
| -rw-r--r-- | include/uapi/linux/can/error.h | 20 | ||||
| -rw-r--r-- | include/uapi/linux/devlink.h | 31 | ||||
| -rw-r--r-- | include/uapi/linux/if_ether.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/if_link.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/neighbour.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 107 | ||||
| -rw-r--r-- | include/uapi/linux/pkt_cls.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/seg6_iptunnel.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/smc.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/snmp.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/sysctl.h | 37 | ||||
| -rw-r--r-- | include/uapi/linux/tls.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/xfrm.h | 6 |
15 files changed, 293 insertions, 34 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index ff225aa3f16a..7bf9ba1329be 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -998,6 +998,7 @@ enum bpf_attach_type { BPF_SK_REUSEPORT_SELECT_OR_MIGRATE, BPF_PERF_EVENT, BPF_TRACE_KPROBE_MULTI, + BPF_LSM_CGROUP, __MAX_BPF_ATTACH_TYPE }; @@ -1431,6 +1432,7 @@ union bpf_attr { __u32 attach_flags; __aligned_u64 prog_ids; __u32 prog_cnt; + __aligned_u64 prog_attach_flags; /* output: per-program attach_flags */ } query; struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ @@ -2359,7 +2361,8 @@ union bpf_attr { * Pull in non-linear data in case the *skb* is non-linear and not * all of *len* are part of the linear section. Make *len* bytes * from *skb* readable and writable. If a zero value is passed for - * *len*, then the whole length of the *skb* is pulled. + * *len*, then all bytes in the linear part of *skb* will be made + * readable and writable. * * This helper is only needed for reading and writing with direct * packet access. @@ -3597,10 +3600,11 @@ union bpf_attr { * * *iph* points to the start of the IPv4 or IPv6 header, while * *iph_len* contains **sizeof**\ (**struct iphdr**) or - * **sizeof**\ (**struct ip6hdr**). + * **sizeof**\ (**struct ipv6hdr**). * * *th* points to the start of the TCP header, while *th_len* - * contains **sizeof**\ (**struct tcphdr**). + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). * Return * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative * error otherwise. @@ -3783,10 +3787,11 @@ union bpf_attr { * * *iph* points to the start of the IPv4 or IPv6 header, while * *iph_len* contains **sizeof**\ (**struct iphdr**) or - * **sizeof**\ (**struct ip6hdr**). + * **sizeof**\ (**struct ipv6hdr**). * * *th* points to the start of the TCP header, while *th_len* - * contains the length of the TCP header. + * contains the length of the TCP header with options (at least + * **sizeof**\ (**struct tcphdr**)). * Return * On success, lower 32 bits hold the generated SYN cookie in * followed by 16 bits which hold the MSS value for that cookie, @@ -5252,6 +5257,80 @@ union bpf_attr { * Pointer to the underlying dynptr data, NULL if the dynptr is * read-only, if the dynptr is invalid, or if the offset and length * is out of bounds. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv4/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv6/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. + * + * long bpf_tcp_raw_check_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. + * + * long bpf_tcp_raw_check_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. + * + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5458,6 +5537,10 @@ union bpf_attr { FN(dynptr_read), \ FN(dynptr_write), \ FN(dynptr_data), \ + FN(tcp_raw_gen_syncookie_ipv4), \ + FN(tcp_raw_gen_syncookie_ipv6), \ + FN(tcp_raw_check_syncookie_ipv4), \ + FN(tcp_raw_check_syncookie_ipv6), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper @@ -5998,6 +6081,8 @@ struct bpf_prog_info { __u64 run_cnt; __u64 recursion_misses; __u32 verified_insns; + __u32 attach_btf_obj_id; + __u32 attach_btf_id; } __attribute__((aligned(8))); struct bpf_map_info { @@ -6705,6 +6790,7 @@ enum bpf_core_relo_kind { BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */ BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */ BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */ + BPF_CORE_TYPE_MATCHES = 12, /* type match in target kernel */ }; /* diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index a9162a6c0284..ec1798b6d3ff 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -36,10 +36,10 @@ struct btf_type { * bits 24-28: kind (e.g. int, ptr, array...etc) * bits 29-30: unused * bit 31: kind_flag, currently used by - * struct, union and fwd + * struct, union, enum, fwd and enum64 */ __u32 info; - /* "size" is used by INT, ENUM, STRUCT, UNION and DATASEC. + /* "size" is used by INT, ENUM, STRUCT, UNION, DATASEC and ENUM64. * "size" tells the size of the type it is describing. * * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, @@ -63,7 +63,7 @@ enum { BTF_KIND_ARRAY = 3, /* Array */ BTF_KIND_STRUCT = 4, /* Struct */ BTF_KIND_UNION = 5, /* Union */ - BTF_KIND_ENUM = 6, /* Enumeration */ + BTF_KIND_ENUM = 6, /* Enumeration up to 32-bit values */ BTF_KIND_FWD = 7, /* Forward */ BTF_KIND_TYPEDEF = 8, /* Typedef */ BTF_KIND_VOLATILE = 9, /* Volatile */ @@ -76,6 +76,7 @@ enum { BTF_KIND_FLOAT = 16, /* Floating point */ BTF_KIND_DECL_TAG = 17, /* Decl Tag */ BTF_KIND_TYPE_TAG = 18, /* Type Tag */ + BTF_KIND_ENUM64 = 19, /* Enumeration up to 64-bit values */ NR_BTF_KINDS, BTF_KIND_MAX = NR_BTF_KINDS - 1, @@ -186,4 +187,14 @@ struct btf_decl_tag { __s32 component_idx; }; +/* BTF_KIND_ENUM64 is followed by multiple "struct btf_enum64". + * The exact number of btf_enum64 is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_enum64 { + __u32 name_off; + __u32 val_lo32; + __u32 val_hi32; +}; + #endif /* _UAPI__LINUX_BTF_H__ */ diff --git a/include/uapi/linux/can/error.h b/include/uapi/linux/can/error.h index 34633283de64..acc1ac393d2a 100644 --- a/include/uapi/linux/can/error.h +++ b/include/uapi/linux/can/error.h @@ -57,6 +57,8 @@ #define CAN_ERR_BUSOFF 0x00000040U /* bus off */ #define CAN_ERR_BUSERROR 0x00000080U /* bus error (may flood!) */ #define CAN_ERR_RESTARTED 0x00000100U /* controller restarted */ +#define CAN_ERR_CNT 0x00000200U /* TX error counter / data[6] */ + /* RX error counter / data[7] */ /* arbitration lost in bit ... / data[0] */ #define CAN_ERR_LOSTARB_UNSPEC 0x00 /* unspecified */ @@ -120,6 +122,22 @@ #define CAN_ERR_TRX_CANL_SHORT_TO_GND 0x70 /* 0111 0000 */ #define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */ -/* controller specific additional information / data[5..7] */ +/* data[5] is reserved (do not use) */ + +/* TX error counter / data[6] */ +/* RX error counter / data[7] */ + +/* CAN state thresholds + * + * Error counter Error state + * ----------------------------------- + * 0 - 95 Error-active + * 96 - 127 Error-warning + * 128 - 255 Error-passive + * 256 and greater Bus-off + */ +#define CAN_ERROR_WARNING_THRESHOLD 96 +#define CAN_ERROR_PASSIVE_THRESHOLD 128 +#define CAN_BUS_OFF_THRESHOLD 256 #endif /* _UAPI_CAN_ERROR_H */ diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index b3d40a5d72ff..2f24b53a87a5 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -136,6 +136,9 @@ enum devlink_command { DEVLINK_CMD_LINECARD_NEW, DEVLINK_CMD_LINECARD_DEL, + DEVLINK_CMD_SELFTESTS_GET, /* can dump */ + DEVLINK_CMD_SELFTESTS_RUN, + /* add new commands above here */ __DEVLINK_CMD_MAX, DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1 @@ -276,6 +279,30 @@ enum { #define DEVLINK_SUPPORTED_FLASH_OVERWRITE_SECTIONS \ (_BITUL(__DEVLINK_FLASH_OVERWRITE_MAX_BIT) - 1) +enum devlink_attr_selftest_id { + DEVLINK_ATTR_SELFTEST_ID_UNSPEC, + DEVLINK_ATTR_SELFTEST_ID_FLASH, /* flag */ + + __DEVLINK_ATTR_SELFTEST_ID_MAX, + DEVLINK_ATTR_SELFTEST_ID_MAX = __DEVLINK_ATTR_SELFTEST_ID_MAX - 1 +}; + +enum devlink_selftest_status { + DEVLINK_SELFTEST_STATUS_SKIP, + DEVLINK_SELFTEST_STATUS_PASS, + DEVLINK_SELFTEST_STATUS_FAIL +}; + +enum devlink_attr_selftest_result { + DEVLINK_ATTR_SELFTEST_RESULT_UNSPEC, + DEVLINK_ATTR_SELFTEST_RESULT, /* nested */ + DEVLINK_ATTR_SELFTEST_RESULT_ID, /* u32, enum devlink_attr_selftest_id */ + DEVLINK_ATTR_SELFTEST_RESULT_STATUS, /* u8, enum devlink_selftest_status */ + + __DEVLINK_ATTR_SELFTEST_RESULT_MAX, + DEVLINK_ATTR_SELFTEST_RESULT_MAX = __DEVLINK_ATTR_SELFTEST_RESULT_MAX - 1 +}; + /** * enum devlink_trap_action - Packet trap action. * @DEVLINK_TRAP_ACTION_DROP: Packet is dropped by the device and a copy is not @@ -576,6 +603,10 @@ enum devlink_attr { DEVLINK_ATTR_LINECARD_TYPE, /* string */ DEVLINK_ATTR_LINECARD_SUPPORTED_TYPES, /* nested */ + DEVLINK_ATTR_NESTED_DEVLINK, /* nested */ + + DEVLINK_ATTR_SELFTESTS, /* nested */ + /* add new attributes above here, update the policy in devlink.c */ __DEVLINK_ATTR_MAX, diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 1d0bccc3fa54..d370165bc621 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -116,6 +116,7 @@ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_DSA_8021Q 0xDADB /* Fake VLAN Header for DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DSA_A5PSW 0xE001 /* A5PSW Tag Value [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 5f58dcfe2787..e36d9d2c65a7 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -963,6 +963,7 @@ enum { IFLA_BOND_SLAVE_AD_AGGREGATOR_ID, IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE, IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE, + IFLA_BOND_SLAVE_PRIO, __IFLA_BOND_SLAVE_MAX, }; diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h index 39c565e460c7..a998bf761635 100644 --- a/include/uapi/linux/neighbour.h +++ b/include/uapi/linux/neighbour.h @@ -154,6 +154,7 @@ enum { NDTPA_QUEUE_LENBYTES, /* u32 */ NDTPA_MCAST_REPROBES, /* u32 */ NDTPA_PAD, + NDTPA_INTERVAL_PROBE_TIME_MS, /* u64, msecs */ __NDTPA_MAX }; #define NDTPA_MAX (__NDTPA_MAX - 1) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d9490e3062a7..ffb7c573e299 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -324,6 +324,17 @@ */ /** + * DOC: Multi-Link Operation + * + * In Multi-Link Operation, a connection between to MLDs utilizes multiple + * links. To use this in nl80211, various commands and responses now need + * to or will include the new %NL80211_ATTR_MLO_LINKS attribute. + * Additionally, various commands that need to operate on a specific link + * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to + * use %NL80211_CMD_START_AP or similar functions. + */ + +/** * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors @@ -753,6 +764,13 @@ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA * counters which will be updated to the current value. This attribute * is used during CSA period. + * For TX on an MLD, the frequency can be omitted and the link ID be + * specified, or if transmitting to a known peer MLD (with MLD addresses + * in the frame) both can be omitted and the link will be selected by + * lower layers. + * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may + * be included to indicate the ack TX timestamp. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. This command is @@ -763,7 +781,9 @@ * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies * the TX command and %NL80211_ATTR_FRAME includes the contents of the * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged - * the frame. + * the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the + * tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the ack RX timestamp. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. * @@ -1108,6 +1128,12 @@ * has been received. %NL80211_ATTR_FRAME is used to specify the * frame contents. The frame is the raw EAPoL data, without ethernet or * 802.11 headers. + * For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and + * its effect will depend on the destination: If the destination is known + * to be an MLD, this will be used as a hint to select the link to transmit + * the frame on. If the destination is not an MLD, this will select both + * the link to transmit on and the source address will be set to the link + * address of that link. * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added * indicating the protocol type of the received frame; whether the frame @@ -1237,6 +1263,16 @@ * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to * specify the timeout value. * + * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The + * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link. + * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come + * without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links + * in preparation for e.g. roaming to a regular (non-MLO) AP. + * + * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station + * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station + * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1481,6 +1517,13 @@ enum nl80211_commands { NL80211_CMD_ASSOC_COMEBACK, + NL80211_CMD_ADD_LINK, + NL80211_CMD_REMOVE_LINK, + + NL80211_CMD_ADD_LINK_STA, + NL80211_CMD_MODIFY_LINK_STA, + NL80211_CMD_REMOVE_LINK_STA, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2340,8 +2383,10 @@ enum nl80211_commands { * * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, - * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per - * interface type. + * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and + * other interface-type specific capabilities per interface type. For MLO, + * %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are + * present. * * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO * groupID for monitor mode. @@ -2663,6 +2708,39 @@ enum nl80211_commands { * association request when used with NL80211_CMD_NEW_STATION). Can be set * only if %NL80211_STA_FLAG_WME is set. * + * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with + * various commands that need a link ID to operate. + * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some + * per-link information and a link ID. + * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as + * authenticate/associate. + * + * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO + * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not + * included in NL80211_CMD_CONNECT drivers must not perform MLO connection. + * + * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of + * AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and + * %NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this + * attribute is not present userspace shall consider maximum number of AKM + * suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum + * number prior to the introduction of this attribute. + * + * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16) + * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16) + * + * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the ack TX timestamp. + * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the incoming frame RX timestamp. * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3177,6 +3255,20 @@ enum nl80211_attrs { NL80211_ATTR_DISABLE_EHT, + NL80211_ATTR_MLO_LINKS, + NL80211_ATTR_MLO_LINK_ID, + NL80211_ATTR_MLD_ADDR, + + NL80211_ATTR_MLO_SUPPORT, + + NL80211_ATTR_MAX_NUM_AKM_SUITES, + + NL80211_ATTR_EML_CAPABILITY, + NL80211_ATTR_MLD_CAPA_AND_OPS, + + NL80211_ATTR_TX_HW_TIMESTAMP, + NL80211_ATTR_RX_HW_TIMESTAMP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3231,6 +3323,11 @@ enum nl80211_attrs { #define NL80211_HE_MIN_CAPABILITY_LEN 16 #define NL80211_HE_MAX_CAPABILITY_LEN 54 #define NL80211_MAX_NR_CIPHER_SUITES 5 + +/* + * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES + * present in %NL80211_CMD_GET_WIPHY response. + */ #define NL80211_MAX_NR_AKM_SUITES 2 #define NL80211_EHT_MIN_CAPABILITY_LEN 13 #define NL80211_EHT_MAX_CAPABILITY_LEN 51 @@ -4853,6 +4950,7 @@ enum nl80211_bss_scan_width { * Contains a nested array of signal strength attributes (u8, dBm), * using the nesting index as the antenna number. * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz + * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -4878,6 +4976,7 @@ enum nl80211_bss { NL80211_BSS_PARENT_BSSID, NL80211_BSS_CHAIN_SIGNAL, NL80211_BSS_FREQUENCY_OFFSET, + NL80211_BSS_MLO_LINK_ID, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -5874,7 +5973,7 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up * the connected inactive stations in AP mode. * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested - * to work properly to suppport receiving regulatory hints from + * to work properly to support receiving regulatory hints from * cellular base stations. * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only * here to reserve the value for API/ABI compatibility) diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index ffbe230ef90b..877309d6ca3c 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -589,6 +589,9 @@ enum { TCA_FLOWER_KEY_NUM_OF_VLANS, /* u8 */ + TCA_FLOWER_KEY_PPPOE_SID, /* be16 */ + TCA_FLOWER_KEY_PPP_PROTO, /* be16 */ + __TCA_FLOWER_MAX, }; diff --git a/include/uapi/linux/seg6_iptunnel.h b/include/uapi/linux/seg6_iptunnel.h index a74294211290..ae78791372b8 100644 --- a/include/uapi/linux/seg6_iptunnel.h +++ b/include/uapi/linux/seg6_iptunnel.h @@ -35,6 +35,8 @@ enum { SEG6_IPTUN_MODE_INLINE, SEG6_IPTUN_MODE_ENCAP, SEG6_IPTUN_MODE_L2ENCAP, + SEG6_IPTUN_MODE_ENCAP_RED, + SEG6_IPTUN_MODE_L2ENCAP_RED, }; #endif diff --git a/include/uapi/linux/smc.h b/include/uapi/linux/smc.h index 693f549f6966..bb4dacca31e7 100644 --- a/include/uapi/linux/smc.h +++ b/include/uapi/linux/smc.h @@ -124,6 +124,7 @@ enum { SMC_NLA_LGR_R_V2, /* nest */ SMC_NLA_LGR_R_NET_COOKIE, /* u64 */ SMC_NLA_LGR_R_PAD, /* flag */ + SMC_NLA_LGR_R_BUF_TYPE, /* u8 */ __SMC_NLA_LGR_R_MAX, SMC_NLA_LGR_R_MAX = __SMC_NLA_LGR_R_MAX - 1 }; diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index 904909d020e2..4d7470036a8b 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -344,6 +344,8 @@ enum LINUX_MIB_TLSRXDEVICE, /* TlsRxDevice */ LINUX_MIB_TLSDECRYPTERROR, /* TlsDecryptError */ LINUX_MIB_TLSRXDEVICERESYNC, /* TlsRxDeviceResync */ + LINUX_MIB_TLSDECRYPTRETRY, /* TlsDecryptRetry */ + LINUX_MIB_TLSRXNOPADVIOL, /* TlsRxNoPadViolation */ __LINUX_MIB_TLSMAX }; diff --git a/include/uapi/linux/sysctl.h b/include/uapi/linux/sysctl.h index 6a3b194c50fe..8981f00204db 100644 --- a/include/uapi/linux/sysctl.h +++ b/include/uapi/linux/sysctl.h @@ -584,24 +584,25 @@ enum { /* /proc/sys/net/<protocol>/neigh/<dev> */ enum { - NET_NEIGH_MCAST_SOLICIT=1, - NET_NEIGH_UCAST_SOLICIT=2, - NET_NEIGH_APP_SOLICIT=3, - NET_NEIGH_RETRANS_TIME=4, - NET_NEIGH_REACHABLE_TIME=5, - NET_NEIGH_DELAY_PROBE_TIME=6, - NET_NEIGH_GC_STALE_TIME=7, - NET_NEIGH_UNRES_QLEN=8, - NET_NEIGH_PROXY_QLEN=9, - NET_NEIGH_ANYCAST_DELAY=10, - NET_NEIGH_PROXY_DELAY=11, - NET_NEIGH_LOCKTIME=12, - NET_NEIGH_GC_INTERVAL=13, - NET_NEIGH_GC_THRESH1=14, - NET_NEIGH_GC_THRESH2=15, - NET_NEIGH_GC_THRESH3=16, - NET_NEIGH_RETRANS_TIME_MS=17, - NET_NEIGH_REACHABLE_TIME_MS=18, + NET_NEIGH_MCAST_SOLICIT = 1, + NET_NEIGH_UCAST_SOLICIT = 2, + NET_NEIGH_APP_SOLICIT = 3, + NET_NEIGH_RETRANS_TIME = 4, + NET_NEIGH_REACHABLE_TIME = 5, + NET_NEIGH_DELAY_PROBE_TIME = 6, + NET_NEIGH_GC_STALE_TIME = 7, + NET_NEIGH_UNRES_QLEN = 8, + NET_NEIGH_PROXY_QLEN = 9, + NET_NEIGH_ANYCAST_DELAY = 10, + NET_NEIGH_PROXY_DELAY = 11, + NET_NEIGH_LOCKTIME = 12, + NET_NEIGH_GC_INTERVAL = 13, + NET_NEIGH_GC_THRESH1 = 14, + NET_NEIGH_GC_THRESH2 = 15, + NET_NEIGH_GC_THRESH3 = 16, + NET_NEIGH_RETRANS_TIME_MS = 17, + NET_NEIGH_REACHABLE_TIME_MS = 18, + NET_NEIGH_INTERVAL_PROBE_TIME_MS = 19, }; /* /proc/sys/net/dccp */ diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index bb8f80812b0b..f1157d8f4acd 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -40,6 +40,7 @@ #define TLS_TX 1 /* Set transmit parameters */ #define TLS_RX 2 /* Set receive parameters */ #define TLS_TX_ZEROCOPY_RO 3 /* TX zerocopy (only sendfile now) */ +#define TLS_RX_EXPECT_NO_PAD 4 /* Attempt opportunistic zero-copy */ /* Supported versions */ #define TLS_VERSION_MINOR(ver) ((ver) & 0xFF) @@ -162,6 +163,7 @@ enum { TLS_INFO_TXCONF, TLS_INFO_RXCONF, TLS_INFO_ZC_RO_TX, + TLS_INFO_RX_NO_PAD, __TLS_INFO_MAX, }; #define TLS_INFO_MAX (__TLS_INFO_MAX - 1) diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index e8191e0c3b56..b1f3e6a8f11a 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -511,9 +511,9 @@ struct xfrm_user_offload { int ifindex; __u8 flags; }; -/* This flag was exposed without any kernel code that supporting it. - * Unfortunately, strongswan has the code that uses sets this flag, - * which makes impossible to reuse this bit. +/* This flag was exposed without any kernel code that supports it. + * Unfortunately, strongswan has the code that sets this flag, + * which makes it impossible to reuse this bit. * * So leave it here to make sure that it won't be reused by mistake. */ |