diff options
Diffstat (limited to 'include/uapi/linux')
47 files changed, 1182 insertions, 47 deletions
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index e194387ef784..4e67194fd2c3 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -258,6 +258,7 @@ header-y += neighbour.h header-y += net.h header-y += net_dropmon.h header-y += net_tstamp.h +header-y += netconf.h header-y += netdevice.h header-y += netfilter.h header-y += netfilter_arp.h @@ -415,3 +416,4 @@ header-y += wireless.h header-y += x25.h header-y += xattr.h header-y += xfrm.h +header-y += hw_breakpoint.h diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 76352ac45f24..9f096f1c0907 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -26,7 +26,6 @@ #include <linux/types.h> #include <linux/elf-em.h> -#include <linux/ptrace.h> /* The netlink messages for the audit system is divided into blocks: * 1000 - 1099 are for commanding the audit system @@ -106,6 +105,7 @@ #define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */ #define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ #define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ +#define AUDIT_SECCOMP 1326 /* Secure Computing event */ #define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ #define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index 91e3a360f611..539b179b349c 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -268,8 +268,8 @@ enum { #define DM_VERSION_MAJOR 4 #define DM_VERSION_MINOR 23 -#define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2012-07-25)" +#define DM_VERSION_PATCHLEVEL 1 +#define DM_VERSION_EXTRA "-ioctl (2012-12-18)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index d3eaaaf1009e..0c9b44871df0 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -500,13 +500,26 @@ union ethtool_flow_union { struct ethtool_ah_espip4_spec esp_ip4_spec; struct ethtool_usrip4_spec usr_ip4_spec; struct ethhdr ether_spec; - __u8 hdata[60]; + __u8 hdata[52]; }; +/** + * struct ethtool_flow_ext - additional RX flow fields + * @h_dest: destination MAC address + * @vlan_etype: VLAN EtherType + * @vlan_tci: VLAN tag control information + * @data: user defined data + * + * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT + * is set in &struct ethtool_rx_flow_spec @flow_type. + * @h_dest is valid if %FLOW_MAC_EXT is set. + */ struct ethtool_flow_ext { - __be16 vlan_etype; - __be16 vlan_tci; - __be32 data[2]; + __u8 padding[2]; + unsigned char h_dest[ETH_ALEN]; + __be16 vlan_etype; + __be16 vlan_tci; + __be32 data[2]; }; /** @@ -517,7 +530,8 @@ struct ethtool_flow_ext { * @m_u: Masks for flow field bits to be matched * @m_ext: Masks for additional field bits to be matched * Note, all additional fields must be ignored unless @flow_type - * includes the %FLOW_EXT flag. + * includes the %FLOW_EXT or %FLOW_MAC_EXT flag + * (see &struct ethtool_flow_ext description). * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC * if packets should be discarded * @location: Location of rule in the table. Locations must be @@ -1027,6 +1041,7 @@ enum ethtool_sfeatures_retval_bits { #define ETHER_FLOW 0x12 /* spec only (ether_spec) */ /* Flag to enable additional fields in struct ethtool_rx_flow_spec */ #define FLOW_EXT 0x80000000 +#define FLOW_MAC_EXT 0x40000000 /* L3-L4 network traffic flow hash options */ #define RXH_L2DA (1 << 1) diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h index 8c99ce7202c5..2c267bcbb85c 100644 --- a/include/uapi/linux/eventpoll.h +++ b/include/uapi/linux/eventpoll.h @@ -25,7 +25,6 @@ #define EPOLL_CTL_ADD 1 #define EPOLL_CTL_DEL 2 #define EPOLL_CTL_MOD 3 -#define EPOLL_CTL_DISABLE 4 /* * Request the handling of system wakeup events so as to prevent system suspends diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h index 3d7922433aba..9cfde6941099 100644 --- a/include/uapi/linux/filter.h +++ b/include/uapi/linux/filter.h @@ -127,7 +127,9 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ #define SKF_AD_RXHASH 32 #define SKF_AD_CPU 36 #define SKF_AD_ALU_XOR_X 40 -#define SKF_AD_MAX 44 +#define SKF_AD_VLAN_TAG 44 +#define SKF_AD_VLAN_TAG_PRESENT 48 +#define SKF_AD_MAX 52 #define SKF_NET_OFF (-0x100000) #define SKF_LL_OFF (-0x200000) diff --git a/include/uapi/linux/hdlc/Kbuild b/include/uapi/linux/hdlc/Kbuild index aafaa5aa54d4..8c1d2cb75e33 100644 --- a/include/uapi/linux/hdlc/Kbuild +++ b/include/uapi/linux/hdlc/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += ioctl.h diff --git a/include/uapi/linux/hdlc/ioctl.h b/include/uapi/linux/hdlc/ioctl.h new file mode 100644 index 000000000000..04bc0274a189 --- /dev/null +++ b/include/uapi/linux/hdlc/ioctl.h @@ -0,0 +1,84 @@ +#ifndef __HDLC_IOCTL_H__ +#define __HDLC_IOCTL_H__ + + +#define GENERIC_HDLC_VERSION 4 /* For synchronization with sethdlc utility */ + +#define CLOCK_DEFAULT 0 /* Default setting */ +#define CLOCK_EXT 1 /* External TX and RX clock - DTE */ +#define CLOCK_INT 2 /* Internal TX and RX clock - DCE */ +#define CLOCK_TXINT 3 /* Internal TX and external RX clock */ +#define CLOCK_TXFROMRX 4 /* TX clock derived from external RX clock */ + + +#define ENCODING_DEFAULT 0 /* Default setting */ +#define ENCODING_NRZ 1 +#define ENCODING_NRZI 2 +#define ENCODING_FM_MARK 3 +#define ENCODING_FM_SPACE 4 +#define ENCODING_MANCHESTER 5 + + +#define PARITY_DEFAULT 0 /* Default setting */ +#define PARITY_NONE 1 /* No parity */ +#define PARITY_CRC16_PR0 2 /* CRC16, initial value 0x0000 */ +#define PARITY_CRC16_PR1 3 /* CRC16, initial value 0xFFFF */ +#define PARITY_CRC16_PR0_CCITT 4 /* CRC16, initial 0x0000, ITU-T version */ +#define PARITY_CRC16_PR1_CCITT 5 /* CRC16, initial 0xFFFF, ITU-T version */ +#define PARITY_CRC32_PR0_CCITT 6 /* CRC32, initial value 0x00000000 */ +#define PARITY_CRC32_PR1_CCITT 7 /* CRC32, initial value 0xFFFFFFFF */ + +#define LMI_DEFAULT 0 /* Default setting */ +#define LMI_NONE 1 /* No LMI, all PVCs are static */ +#define LMI_ANSI 2 /* ANSI Annex D */ +#define LMI_CCITT 3 /* ITU-T Annex A */ +#define LMI_CISCO 4 /* The "original" LMI, aka Gang of Four */ + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; +} sync_serial_settings; /* V.35, V.24, X.21 */ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; + unsigned int slot_map; +} te1_settings; /* T1, E1 */ + +typedef struct { + unsigned short encoding; + unsigned short parity; +} raw_hdlc_proto; + +typedef struct { + unsigned int t391; + unsigned int t392; + unsigned int n391; + unsigned int n392; + unsigned int n393; + unsigned short lmi; + unsigned short dce; /* 1 for DCE (network side) operation */ +} fr_proto; + +typedef struct { + unsigned int dlci; +} fr_proto_pvc; /* for creating/deleting FR PVCs */ + +typedef struct { + unsigned int dlci; + char master[IFNAMSIZ]; /* Name of master FRAD device */ +}fr_proto_pvc_info; /* for returning PVC information only */ + +typedef struct { + unsigned int interval; + unsigned int timeout; +} cisco_proto; + +/* PPP doesn't need any info now - supply length = 0 to ioctl */ + +#endif /* __ASSEMBLY__ */ +#endif /* __HDLC_IOCTL_H__ */ diff --git a/include/uapi/linux/hw_breakpoint.h b/include/uapi/linux/hw_breakpoint.h new file mode 100644 index 000000000000..b04000a2296a --- /dev/null +++ b/include/uapi/linux/hw_breakpoint.h @@ -0,0 +1,30 @@ +#ifndef _UAPI_LINUX_HW_BREAKPOINT_H +#define _UAPI_LINUX_HW_BREAKPOINT_H + +enum { + HW_BREAKPOINT_LEN_1 = 1, + HW_BREAKPOINT_LEN_2 = 2, + HW_BREAKPOINT_LEN_4 = 4, + HW_BREAKPOINT_LEN_8 = 8, +}; + +enum { + HW_BREAKPOINT_EMPTY = 0, + HW_BREAKPOINT_R = 1, + HW_BREAKPOINT_W = 2, + HW_BREAKPOINT_RW = HW_BREAKPOINT_R | HW_BREAKPOINT_W, + HW_BREAKPOINT_X = 4, + HW_BREAKPOINT_INVALID = HW_BREAKPOINT_RW | HW_BREAKPOINT_X, +}; + +enum bp_type_idx { + TYPE_INST = 0, +#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS + TYPE_DATA = 0, +#else + TYPE_DATA = 1, +#endif + TYPE_MAX +}; + +#endif /* _UAPI_LINUX_HW_BREAKPOINT_H */ diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index a8fe9549ddbc..5db297514aec 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -97,5 +97,89 @@ struct __fdb_entry { __u16 unused; }; +/* Bridge Flags */ +#define BRIDGE_FLAGS_MASTER 1 /* Bridge command to/from master */ +#define BRIDGE_FLAGS_SELF 2 /* Bridge command to/from lowerdev */ + +#define BRIDGE_MODE_VEB 0 /* Default loopback mode */ +#define BRIDGE_MODE_VEPA 1 /* 802.1Qbg defined VEPA mode */ + +/* Bridge management nested attributes + * [IFLA_AF_SPEC] = { + * [IFLA_BRIDGE_FLAGS] + * [IFLA_BRIDGE_MODE] + * } + */ +enum { + IFLA_BRIDGE_FLAGS, + IFLA_BRIDGE_MODE, + __IFLA_BRIDGE_MAX, +}; +#define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) + +/* Bridge multicast database attributes + * [MDBA_MDB] = { + * [MDBA_MDB_ENTRY] = { + * [MDBA_MDB_ENTRY_INFO] + * } + * } + * [MDBA_ROUTER] = { + * [MDBA_ROUTER_PORT] + * } + */ +enum { + MDBA_UNSPEC, + MDBA_MDB, + MDBA_ROUTER, + __MDBA_MAX, +}; +#define MDBA_MAX (__MDBA_MAX - 1) + +enum { + MDBA_MDB_UNSPEC, + MDBA_MDB_ENTRY, + __MDBA_MDB_MAX, +}; +#define MDBA_MDB_MAX (__MDBA_MDB_MAX - 1) + +enum { + MDBA_MDB_ENTRY_UNSPEC, + MDBA_MDB_ENTRY_INFO, + __MDBA_MDB_ENTRY_MAX, +}; +#define MDBA_MDB_ENTRY_MAX (__MDBA_MDB_ENTRY_MAX - 1) + +enum { + MDBA_ROUTER_UNSPEC, + MDBA_ROUTER_PORT, + __MDBA_ROUTER_MAX, +}; +#define MDBA_ROUTER_MAX (__MDBA_ROUTER_MAX - 1) + +struct br_port_msg { + __u8 family; + __u32 ifindex; +}; + +struct br_mdb_entry { + __u32 ifindex; +#define MDB_TEMPORARY 0 +#define MDB_PERMANENT 1 + __u8 state; + struct { + union { + __be32 ip4; + struct in6_addr ip6; + } u; + __be16 proto; + } addr; +}; + +enum { + MDBA_SET_ENTRY_UNSPEC, + MDBA_SET_ENTRY, + __MDBA_SET_ENTRY_MAX, +}; +#define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1) #endif /* _UAPI_LINUX_IF_BRIDGE_H */ diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 0343e1f0582c..67fb87ca1094 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -48,6 +48,7 @@ #define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ #define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ +#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_DEC 0x6000 /* DEC Assigned proto */ #define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ #define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 5c80cb11518b..60f3b6b90602 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -205,6 +205,24 @@ enum { #define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) +enum { + BRIDGE_MODE_UNSPEC, + BRIDGE_MODE_HAIRPIN, +}; + +enum { + IFLA_BRPORT_UNSPEC, + IFLA_BRPORT_STATE, /* Spanning tree state */ + IFLA_BRPORT_PRIORITY, /* " priority */ + IFLA_BRPORT_COST, /* " cost */ + IFLA_BRPORT_MODE, /* mode (hairpin) */ + IFLA_BRPORT_GUARD, /* bpdu guard */ + IFLA_BRPORT_PROTECT, /* root port protection */ + IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */ + __IFLA_BRPORT_MAX +}; +#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) + struct ifla_cacheinfo { __u32 max_reasm_len; __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ @@ -285,6 +303,10 @@ enum { IFLA_VXLAN_AGEING, IFLA_VXLAN_LIMIT, IFLA_VXLAN_PORT_RANGE, + IFLA_VXLAN_PROXY, + IFLA_VXLAN_RSC, + IFLA_VXLAN_L2MISS, + IFLA_VXLAN_L3MISS, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h index f3799295d231..f9a60375f0d0 100644 --- a/include/uapi/linux/if_packet.h +++ b/include/uapi/linux/if_packet.h @@ -50,6 +50,7 @@ struct sockaddr_ll { #define PACKET_TX_TIMESTAMP 16 #define PACKET_TIMESTAMP 17 #define PACKET_FANOUT 18 +#define PACKET_TX_HAS_OFF 19 #define PACKET_FANOUT_HASH 0 #define PACKET_FANOUT_LB 1 diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h index 25a585ce23e6..2835b85fd46d 100644 --- a/include/uapi/linux/if_tun.h +++ b/include/uapi/linux/if_tun.h @@ -31,9 +31,11 @@ #define TUN_FASYNC 0x0010 #define TUN_NOCHECKSUM 0x0020 #define TUN_NO_PI 0x0040 +/* This flag has no real effect */ #define TUN_ONE_QUEUE 0x0080 #define TUN_PERSIST 0x0100 #define TUN_VNET_HDR 0x0200 +#define TUN_TAP_MQ 0x0400 /* Ioctl defines */ #define TUNSETNOCSUM _IOW('T', 200, int) @@ -53,14 +55,19 @@ #define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) #define TUNGETVNETHDRSZ _IOR('T', 215, int) #define TUNSETVNETHDRSZ _IOW('T', 216, int) +#define TUNSETQUEUE _IOW('T', 217, int) /* TUNSETIFF ifr flags */ #define IFF_TUN 0x0001 #define IFF_TAP 0x0002 #define IFF_NO_PI 0x1000 +/* This flag has no real effect */ #define IFF_ONE_QUEUE 0x2000 #define IFF_VNET_HDR 0x4000 #define IFF_TUN_EXCL 0x8000 +#define IFF_MULTI_QUEUE 0x0100 +#define IFF_ATTACH_QUEUE 0x0200 +#define IFF_DETACH_QUEUE 0x0400 /* Features for GSO (TUNSETOFFLOAD). */ #define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h index 5db5942575fe..aee73d0611fb 100644 --- a/include/uapi/linux/if_tunnel.h +++ b/include/uapi/linux/if_tunnel.h @@ -37,6 +37,26 @@ struct ip_tunnel_parm { struct iphdr iph; }; +enum { + IFLA_IPTUN_UNSPEC, + IFLA_IPTUN_LINK, + IFLA_IPTUN_LOCAL, + IFLA_IPTUN_REMOTE, + IFLA_IPTUN_TTL, + IFLA_IPTUN_TOS, + IFLA_IPTUN_ENCAP_LIMIT, + IFLA_IPTUN_FLOWINFO, + IFLA_IPTUN_FLAGS, + IFLA_IPTUN_PROTO, + IFLA_IPTUN_PMTUDISC, + IFLA_IPTUN_6RD_PREFIX, + IFLA_IPTUN_6RD_RELAY_PREFIX, + IFLA_IPTUN_6RD_PREFIXLEN, + IFLA_IPTUN_6RD_RELAY_PREFIXLEN, + __IFLA_IPTUN_MAX, +}; +#define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1) + /* SIT-mode i_flags */ #define SIT_ISATAP 0x0001 diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index 1e3159989958..f79c3721da6e 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -240,6 +240,7 @@ struct in6_flowlabel_req { * * IP6T_SO_GET_REVISION_MATCH 68 * IP6T_SO_GET_REVISION_TARGET 69 + * IP6T_SO_ORIGINAL_DST 80 */ /* RFC5014: Source address selection */ diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h index 8c469af939aa..bbde90fa5838 100644 --- a/include/uapi/linux/inet_diag.h +++ b/include/uapi/linux/inet_diag.h @@ -109,9 +109,10 @@ enum { INET_DIAG_TOS, INET_DIAG_TCLASS, INET_DIAG_SKMEMINFO, + INET_DIAG_SHUTDOWN, }; -#define INET_DIAG_MAX INET_DIAG_SKMEMINFO +#define INET_DIAG_MAX INET_DIAG_SHUTDOWN /* INET_DIAG_MEM */ diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index 558828590a69..935119c698ac 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -851,6 +851,7 @@ struct input_keymap_entry { #define MSC_GESTURE 0x02 #define MSC_RAW 0x03 #define MSC_SCAN 0x04 +#define MSC_TIMESTAMP 0x05 #define MSC_MAX 0x07 #define MSC_CNT (MSC_MAX+1) diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index a6d7d1c536c3..5a2991cf0251 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -157,6 +157,7 @@ enum { DEVCONF_DISABLE_IPV6, DEVCONF_ACCEPT_DAD, DEVCONF_FORCE_TLLAO, + DEVCONF_NDISC_NOTIFY, DEVCONF_MAX }; diff --git a/include/uapi/linux/ipv6_route.h b/include/uapi/linux/ipv6_route.h index 0459664c2636..2be7bd174751 100644 --- a/include/uapi/linux/ipv6_route.h +++ b/include/uapi/linux/ipv6_route.h @@ -55,4 +55,7 @@ struct in6_rtmsg { #define RTMSG_NEWROUTE 0x21 #define RTMSG_DELROUTE 0x22 +#define IP6_RT_PRIO_USER 1024 +#define IP6_RT_PRIO_ADDRCONF 256 + #endif /* _UAPI_LINUX_IPV6_ROUTE_H */ diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 0a6d6ba44c85..e6e5d4b13708 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -167,10 +167,15 @@ struct kvm_pit_config { #define KVM_EXIT_OSI 18 #define KVM_EXIT_PAPR_HCALL 19 #define KVM_EXIT_S390_UCONTROL 20 +#define KVM_EXIT_WATCHDOG 21 /* For KVM_EXIT_INTERNAL_ERROR */ -#define KVM_INTERNAL_ERROR_EMULATION 1 -#define KVM_INTERNAL_ERROR_SIMUL_EX 2 +/* Emulate instruction failed. */ +#define KVM_INTERNAL_ERROR_EMULATION 1 +/* Encounter unexpected simultaneous exceptions. */ +#define KVM_INTERNAL_ERROR_SIMUL_EX 2 +/* Encounter unexpected vm-exit due to delivery event. */ +#define KVM_INTERNAL_ERROR_DELIVERY_EV 3 /* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */ struct kvm_run { @@ -477,6 +482,8 @@ struct kvm_ppc_smmu_info { struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; }; +#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) + #define KVMIO 0xAE /* machine type bits, to be used as argument to KVM_CREATE_VM */ @@ -626,6 +633,8 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_READONLY_MEM 81 #endif #define KVM_CAP_IRQFD_RESAMPLE 82 +#define KVM_CAP_PPC_BOOKE_WATCHDOG 83 +#define KVM_CAP_PPC_HTAB_FD 84 #ifdef KVM_CAP_IRQ_ROUTING @@ -848,6 +857,11 @@ struct kvm_s390_ucas_mapping { #define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) /* Available with KVM_CAP_PPC_ALLOC_HTAB */ #define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) +#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) +/* Available with KVM_CAP_RMA */ +#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) +/* Available with KVM_CAP_PPC_HTAB_FD */ +#define KVM_PPC_GET_HTAB_FD _IOW(KVMIO, 0xaa, struct kvm_get_htab_fd) /* * ioctls for vcpu fds @@ -911,9 +925,6 @@ struct kvm_s390_ucas_mapping { /* Available with KVM_CAP_XCRS */ #define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs) #define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs) -#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) -/* Available with KVM_CAP_RMA */ -#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) /* Available with KVM_CAP_SW_TLB */ #define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) /* Available with KVM_CAP_ONE_REG */ diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h index e15192cb9cf4..873e086ce3a1 100644 --- a/include/uapi/linux/magic.h +++ b/include/uapi/linux/magic.h @@ -23,10 +23,12 @@ #define EXT4_SUPER_MAGIC 0xEF53 #define BTRFS_SUPER_MAGIC 0x9123683E #define NILFS_SUPER_MAGIC 0x3434 +#define F2FS_SUPER_MAGIC 0xF2F52010 #define HPFS_SUPER_MAGIC 0xf995e849 #define ISOFS_SUPER_MAGIC 0x9660 #define JFFS2_SUPER_MAGIC 0x72b6 #define PSTOREFS_MAGIC 0x6165676C +#define EFIVARFS_MAGIC 0xde5e81e4 #define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ #define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */ diff --git a/include/uapi/linux/mempolicy.h b/include/uapi/linux/mempolicy.h index 23e62e0537e2..0d11c3dcd3a1 100644 --- a/include/uapi/linux/mempolicy.h +++ b/include/uapi/linux/mempolicy.h @@ -20,6 +20,7 @@ enum { MPOL_PREFERRED, MPOL_BIND, MPOL_INTERLEAVE, + MPOL_LOCAL, MPOL_MAX, /* always last member of enum */ }; @@ -47,9 +48,15 @@ enum mpol_rebind_step { /* Flags for mbind */ #define MPOL_MF_STRICT (1<<0) /* Verify existing pages in the mapping */ -#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform to mapping */ -#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to mapping */ -#define MPOL_MF_INTERNAL (1<<3) /* Internal flags start here */ +#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform + to policy */ +#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to policy */ +#define MPOL_MF_LAZY (1<<3) /* Modifies '_MOVE: lazy migrate on fault */ +#define MPOL_MF_INTERNAL (1<<4) /* Internal flags start here */ + +#define MPOL_MF_VALID (MPOL_MF_STRICT | \ + MPOL_MF_MOVE | \ + MPOL_MF_MOVE_ALL) /* * Internal flags that share the struct mempolicy flags word with @@ -59,6 +66,8 @@ enum mpol_rebind_step { #define MPOL_F_SHARED (1 << 0) /* identify shared policies */ #define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */ #define MPOL_F_REBINDING (1 << 2) /* identify policies in rebinding */ +#define MPOL_F_MOF (1 << 3) /* this policy wants migrate on fault */ +#define MPOL_F_MORON (1 << 4) /* Migrate On pte_numa Reference On Node */ #endif /* _UAPI_LINUX_MEMPOLICY_H */ diff --git a/include/uapi/linux/module.h b/include/uapi/linux/module.h new file mode 100644 index 000000000000..38da4258b12f --- /dev/null +++ b/include/uapi/linux/module.h @@ -0,0 +1,8 @@ +#ifndef _UAPI_LINUX_MODULE_H +#define _UAPI_LINUX_MODULE_H + +/* Flags for sys_finit_module: */ +#define MODULE_INIT_IGNORE_MODVERSIONS 1 +#define MODULE_INIT_IGNORE_VERMAGIC 2 + +#endif /* _UAPI_LINUX_MODULE_H */ diff --git a/include/uapi/linux/msg.h b/include/uapi/linux/msg.h index 78dbd2f996a3..22d95c6854e0 100644 --- a/include/uapi/linux/msg.h +++ b/include/uapi/linux/msg.h @@ -10,6 +10,7 @@ /* msgrcv options */ #define MSG_NOERROR 010000 /* no error if message is too big */ #define MSG_EXCEPT 020000 /* recv any msg except of specified type.*/ +#define MSG_COPY 040000 /* copy (not remove) all queue messages */ /* Obsolete, used only for backwards compatibility and libc5 compiles */ struct msqid_ds { diff --git a/include/uapi/linux/netconf.h b/include/uapi/linux/netconf.h new file mode 100644 index 000000000000..64804a798b0c --- /dev/null +++ b/include/uapi/linux/netconf.h @@ -0,0 +1,24 @@ +#ifndef _UAPI_LINUX_NETCONF_H_ +#define _UAPI_LINUX_NETCONF_H_ + +#include <linux/types.h> +#include <linux/netlink.h> + +struct netconfmsg { + __u8 ncm_family; +}; + +enum { + NETCONFA_UNSPEC, + NETCONFA_IFINDEX, + NETCONFA_FORWARDING, + NETCONFA_RP_FILTER, + NETCONFA_MC_FORWARDING, + __NETCONFA_MAX +}; +#define NETCONFA_MAX (__NETCONFA_MAX - 1) + +#define NETCONFA_IFINDEX_ALL -1 +#define NETCONFA_IFINDEX_DEFAULT -2 + +#endif /* _UAPI_LINUX_NETCONF_H_ */ diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 43bfe3e1685b..86e930cf3dfb 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -9,6 +9,8 @@ enum cntl_msg_types { IPCTNL_MSG_CT_GET_CTRZERO, IPCTNL_MSG_CT_GET_STATS_CPU, IPCTNL_MSG_CT_GET_STATS, + IPCTNL_MSG_CT_GET_DYING, + IPCTNL_MSG_CT_GET_UNCONFIRMED, IPCTNL_MSG_MAX }; diff --git a/include/uapi/linux/netfilter_ipv6/ip6_tables.h b/include/uapi/linux/netfilter_ipv6/ip6_tables.h index bf1ef65cc582..649c68062dca 100644 --- a/include/uapi/linux/netfilter_ipv6/ip6_tables.h +++ b/include/uapi/linux/netfilter_ipv6/ip6_tables.h @@ -178,6 +178,9 @@ struct ip6t_error { #define IP6T_SO_GET_REVISION_TARGET (IP6T_BASE_CTL + 5) #define IP6T_SO_GET_MAX IP6T_SO_GET_REVISION_TARGET +/* obtain original address if REDIRECT'd connection */ +#define IP6T_SO_ORIGINAL_DST 80 + /* ICMP matching stuff */ struct ip6t_icmp { __u8 type; /* type to match */ diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index d908d17da56d..0e63cee8d810 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -60,6 +60,13 @@ * target mode. * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated * from target mode. + * @NFC_CMD_LLC_GET_PARAMS: request LTO, RW, and MIUX parameters for a device + * @NFC_CMD_LLC_SET_PARAMS: set one or more of LTO, RW, and MIUX parameters for + * a device. LTO must be set before the link is up otherwise -EINPROGRESS + * is returned. RW and MIUX can be set at anytime and will be passed in + * subsequent CONNECT and CC messages. + * If one of the passed parameters is wrong none is set and -EINVAL is + * returned. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -77,6 +84,8 @@ enum nfc_commands { NFC_EVENT_TARGET_LOST, NFC_EVENT_TM_ACTIVATED, NFC_EVENT_TM_DEACTIVATED, + NFC_CMD_LLC_GET_PARAMS, + NFC_CMD_LLC_SET_PARAMS, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -102,6 +111,9 @@ enum nfc_commands { * @NFC_ATTR_RF_MODE: Initiator or target * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for + * @NFC_ATTR_LLC_PARAM_LTO: Link TimeOut parameter + * @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter + * @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -119,6 +131,9 @@ enum nfc_attrs { NFC_ATTR_DEVICE_POWERED, NFC_ATTR_IM_PROTOCOLS, NFC_ATTR_TM_PROTOCOLS, + NFC_ATTR_LLC_PARAM_LTO, + NFC_ATTR_LLC_PARAM_RW, + NFC_ATTR_LLC_PARAM_MIUX, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 7df9b500c804..e3e19f8b16f2 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -118,8 +118,9 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the + * attributes determining the channel width; this is used for setting + * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL @@ -171,7 +172,7 @@ * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. * The channel to use can be set on the interface or be given using the - * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs. + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -401,8 +402,7 @@ * a response while being associated to an AP on another channel. * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the - * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be - * optionally used to specify additional channel parameters. + * frequency for the operation. * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds * to remain on the channel. This command is also used as an event to * notify when the requested duration starts (it may take a while for the @@ -440,12 +440,11 @@ * as an event indicating reception of a frame that was not processed in * kernel code, but is for us (i.e., which may need to be processed in a * user space application). %NL80211_ATTR_FRAME is used to specify the - * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and - * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on - * which channel the frame is to be transmitted or was received. If this - * channel is not the current channel (remain-on-channel or the - * operational channel) the device will switch to the given channel and - * transmit the frame, optionally waiting for a response for the time + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used + * to indicate on which channel the frame is to be transmitted or was + * received. If this channel is not the current channel (remain-on-channel + * or the operational channel) the device will switch to the given channel + * and transmit the frame, optionally waiting for a response for the time * specified using %NL80211_ATTR_DURATION. When called, this operation * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the * TX status event pertaining to the TX request. @@ -473,8 +472,8 @@ * command is used as an event to indicate the that a trigger level was * reached. * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ - * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed - * by %NL80211_ATTR_IFINDEX) shall operate on. + * and the attributes determining channel width) the given interface + * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. * In case multiple channels are supported by the device, the mechanism * with which it switches channels is implementation-defined. * When a monitor interface is given, it can only switch channel while @@ -526,6 +525,12 @@ * of PMKSA caching dandidates. * * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * In addition, this can be used as an event to request userspace to take + * actions on TDLS links (set up a new link or tear down an existing one). + * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested + * operation, %NL80211_ATTR_MAC contains the peer MAC address, and + * %NL80211_ATTR_REASON_CODE the reason code to be used (only with + * %NL80211_TDLS_TEARDOWN). * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. * * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP @@ -562,8 +567,8 @@ * * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels * independently of the userspace SME, send this event indicating - * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the + * attributes determining channel width. * * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by * its %NL80211_ATTR_WDEV identifier. It must have been created with @@ -578,6 +583,9 @@ * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON * is used for this. * + * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames + * for IBSS or MESH vif. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -726,6 +734,8 @@ enum nl80211_commands { NL80211_CMD_CONN_FAILED, + NL80211_CMD_SET_MCAST_RATE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -762,14 +772,26 @@ enum nl80211_commands { * /sys/class/ieee80211/<phyname>/index * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters - * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz + * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, + * defines the channel together with the (deprecated) + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes + * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 + * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values + * of &enum nl80211_chan_width, describing the channel width. See the + * documentation of the enum for more information. + * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the + * channel, used for anything but 20 MHz bandwidth + * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the + * channel, used only for 80+80 MHz bandwidth * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ - * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): + * if HT20 or HT40 are to be used (i.e., HT disabled if not included): * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including * this attribute) * NL80211_CHAN_HT20 = HT20 only * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * This attribute is now deprecated. * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is * less than or equal to the RTS threshold; allowed range: 1..255; * dot11ShortRetryLimit; u8 @@ -1273,6 +1295,21 @@ enum nl80211_commands { * the connection request from a station. nl80211_connect_failed_reason * enum has different reasons of connection failure. * + * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts + * with the Authentication transaction sequence number field. + * + * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) + * + * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with + * the START_AP and SET_BSS commands + * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the + * START_AP and SET_BSS commands. This can have the values 0 or 1; + * if not given in START_AP 0 is assumed, if not given in SET_BSS + * no change is made. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1530,6 +1567,19 @@ enum nl80211_attrs { NL80211_ATTR_CONN_FAILED_REASON, + NL80211_ATTR_SAE_DATA, + + NL80211_ATTR_VHT_CAPABILITY, + + NL80211_ATTR_SCAN_FLAGS, + + NL80211_ATTR_CHANNEL_WIDTH, + NL80211_ATTR_CENTER_FREQ1, + NL80211_ATTR_CENTER_FREQ2, + + NL80211_ATTR_P2P_CTWINDOW, + NL80211_ATTR_P2P_OPPPS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1573,6 +1623,7 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_VHT_CAPABILITY_LEN 12 #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 @@ -1693,10 +1744,15 @@ struct nl80211_sta_flag_update { * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) - * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate + * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined + * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) + * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) + * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate + * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate + * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -1706,6 +1762,11 @@ enum nl80211_rate_info { NL80211_RATE_INFO_40_MHZ_WIDTH, NL80211_RATE_INFO_SHORT_GI, NL80211_RATE_INFO_BITRATE32, + NL80211_RATE_INFO_VHT_MCS, + NL80211_RATE_INFO_VHT_NSS, + NL80211_RATE_INFO_80_MHZ_WIDTH, + NL80211_RATE_INFO_80P80_MHZ_WIDTH, + NL80211_RATE_INFO_160_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -2414,6 +2475,15 @@ enum nl80211_ac { #define NL80211_TXQ_Q_BE NL80211_AC_BE #define NL80211_TXQ_Q_BK NL80211_AC_BK +/** + * enum nl80211_channel_type - channel type + * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel + * @NL80211_CHAN_HT20: 20 MHz HT channel + * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel + * below the control channel + * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel + * above the control channel + */ enum nl80211_channel_type { NL80211_CHAN_NO_HT, NL80211_CHAN_HT20, @@ -2422,6 +2492,32 @@ enum nl80211_channel_type { }; /** + * enum nl80211_chan_width - channel width definitions + * + * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH + * attribute. + * + * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel + * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel + * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well + * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + */ +enum nl80211_chan_width { + NL80211_CHAN_WIDTH_20_NOHT, + NL80211_CHAN_WIDTH_20, + NL80211_CHAN_WIDTH_40, + NL80211_CHAN_WIDTH_80, + NL80211_CHAN_WIDTH_80P80, + NL80211_CHAN_WIDTH_160, +}; + +/** * enum nl80211_bss - netlink attributes for a BSS * * @__NL80211_BSS_INVALID: invalid @@ -2489,6 +2585,7 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -2500,6 +2597,7 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_SHARED_KEY, NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, + NL80211_AUTHTYPE_SAE, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -3028,6 +3126,20 @@ enum nl80211_ap_sme_features { * in the interface combinations, even when it's only used for scan * and remain-on-channel. This could be due to, for example, the * remain-on-channel implementation requiring a channel context. + * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of + * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station + * mode + * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan + * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported + * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif + * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting + * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform + * OBSS scans and generate 20/40 BSS coex reports. This flag is used only + * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. + * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window + * setting + * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic + * powersave */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3035,6 +3147,14 @@ enum nl80211_feature_flags { NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, + NL80211_FEATURE_SAE = 1 << 5, + NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, + NL80211_FEATURE_SCAN_FLUSH = 1 << 7, + NL80211_FEATURE_AP_SCAN = 1 << 8, + NL80211_FEATURE_VIF_TXPOWER = 1 << 9, + NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, + NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, + NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, }; /** @@ -3069,4 +3189,25 @@ enum nl80211_connect_failed_reason { NL80211_CONN_FAIL_BLOCKED_CLIENT, }; +/** + * enum nl80211_scan_flags - scan request control flags + * + * Scan request control flags are used to control the handling + * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN + * requests. + * + * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority + * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning + * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured + * as AP and the beaconing has already been configured. This attribute is + * dangerous because will destroy stations performance as a lot of frames + * will be lost while scanning off-channel, therefore it must be used only + * when really needed + */ +enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, + NL80211_SCAN_FLAG_FLUSH = 1<<1, + NL80211_SCAN_FLAG_AP = 1<<2, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h index a49c4afc7060..b29272d621ce 100644 --- a/include/uapi/linux/oom.h +++ b/include/uapi/linux/oom.h @@ -8,4 +8,13 @@ #define OOM_SCORE_ADJ_MIN (-1000) #define OOM_SCORE_ADJ_MAX 1000 +/* + * /proc/<pid>/oom_adj set to -17 protects from the oom killer for legacy + * purposes. + */ +#define OOM_DISABLE (-17) +/* inclusive */ +#define OOM_ADJUST_MIN (-16) +#define OOM_ADJUST_MAX 15 + #endif /* _UAPI__INCLUDE_LINUX_OOM_H */ diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 20ae747ddf34..ebfadc56d1b4 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -349,7 +349,7 @@ #define PCI_AF_STATUS_TP 0x01 #define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */ -/* PCI-X registers */ +/* PCI-X registers (Type 0 (non-bridge) devices) */ #define PCI_X_CMD 2 /* Modes & Features */ #define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ @@ -389,6 +389,19 @@ #define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */ #define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */ +/* PCI-X registers (Type 1 (bridge) devices) */ + +#define PCI_X_BRIDGE_SSTATUS 2 /* Secondary Status */ +#define PCI_X_SSTATUS_64BIT 0x0001 /* Secondary AD interface is 64 bits */ +#define PCI_X_SSTATUS_133MHZ 0x0002 /* 133 MHz capable */ +#define PCI_X_SSTATUS_FREQ 0x03c0 /* Secondary Bus Mode and Frequency */ +#define PCI_X_SSTATUS_VERS 0x3000 /* PCI-X Capability Version */ +#define PCI_X_SSTATUS_V1 0x1000 /* Mode 2, not Mode 1 */ +#define PCI_X_SSTATUS_V2 0x2000 /* Mode 1 or Modes 1 and 2 */ +#define PCI_X_SSTATUS_266MHZ 0x4000 /* 266 MHz capable */ +#define PCI_X_SSTATUS_533MHZ 0x8000 /* 533 MHz capable */ +#define PCI_X_BRIDGE_STATUS 4 /* Bridge Status */ + /* PCI Bridge Subsystem ID registers */ #define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */ @@ -445,6 +458,8 @@ #define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ +#define PCI_EXP_LNKCAP_SLS_2_5GB 0x1 /* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */ +#define PCI_EXP_LNKCAP_SLS_5_0GB 0x2 /* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ @@ -456,6 +471,8 @@ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ #define PCI_EXP_LNKCTL 16 /* Link Control */ #define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ +#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */ +#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */ #define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ #define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ #define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ @@ -544,9 +561,9 @@ #define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ #define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ -#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ -#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ -#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x02 /* Supported Link Speed 2.5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x04 /* Supported Link Speed 5.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x08 /* Supported Link Speed 8.0GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index 94e981f810a2..b65c834f83e9 100644 --- a/include/uapi/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h @@ -67,12 +67,26 @@ struct ptp_perout_request { unsigned int rsv[4]; /* Reserved for future use. */ }; +#define PTP_MAX_SAMPLES 25 /* Maximum allowed offset measurement samples. */ + +struct ptp_sys_offset { + unsigned int n_samples; /* Desired number of measurements. */ + unsigned int rsv[3]; /* Reserved for future use. */ + /* + * Array of interleaved system/phc time stamps. The kernel + * will provide 2*n_samples + 1 time stamps, with the last + * one as a system time stamp. + */ + struct ptp_clock_time ts[2 * PTP_MAX_SAMPLES + 1]; +}; + #define PTP_CLK_MAGIC '=' #define PTP_CLOCK_GETCAPS _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps) #define PTP_EXTTS_REQUEST _IOW(PTP_CLK_MAGIC, 2, struct ptp_extts_request) #define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request) #define PTP_ENABLE_PPS _IOW(PTP_CLK_MAGIC, 4, int) +#define PTP_SYS_OFFSET _IOW(PTP_CLK_MAGIC, 5, struct ptp_sys_offset) struct ptp_extts_event { struct ptp_clock_time t; /* Time event occured. */ diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h index 1ef6c056a9e4..022ab186a812 100644 --- a/include/uapi/linux/ptrace.h +++ b/include/uapi/linux/ptrace.h @@ -73,7 +73,10 @@ #define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT) #define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP) -#define PTRACE_O_MASK 0x000000ff +/* eventless options */ +#define PTRACE_O_EXITKILL (1 << 20) + +#define PTRACE_O_MASK (0x000000ff | PTRACE_O_EXITKILL) #include <asm/ptrace.h> diff --git a/include/uapi/linux/raid/Kbuild b/include/uapi/linux/raid/Kbuild index aafaa5aa54d4..e2c3d25405d7 100644 --- a/include/uapi/linux/raid/Kbuild +++ b/include/uapi/linux/raid/Kbuild @@ -1 +1,3 @@ # UAPI Header export list +header-y += md_p.h +header-y += md_u.h diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h new file mode 100644 index 000000000000..ee753536ab70 --- /dev/null +++ b/include/uapi/linux/raid/md_p.h @@ -0,0 +1,301 @@ +/* + md_p.h : physical layout of Linux RAID devices + Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + You should have received a copy of the GNU General Public License + (for example /usr/src/linux/COPYING); if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _MD_P_H +#define _MD_P_H + +#include <linux/types.h> + +/* + * RAID superblock. + * + * The RAID superblock maintains some statistics on each RAID configuration. + * Each real device in the RAID set contains it near the end of the device. + * Some of the ideas are copied from the ext2fs implementation. + * + * We currently use 4096 bytes as follows: + * + * word offset function + * + * 0 - 31 Constant generic RAID device information. + * 32 - 63 Generic state information. + * 64 - 127 Personality specific information. + * 128 - 511 12 32-words descriptors of the disks in the raid set. + * 512 - 911 Reserved. + * 912 - 1023 Disk specific descriptor. + */ + +/* + * If x is the real device size in bytes, we return an apparent size of: + * + * y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES + * + * and place the 4kB superblock at offset y. + */ +#define MD_RESERVED_BYTES (64 * 1024) +#define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512) + +#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS) + +#define MD_SB_BYTES 4096 +#define MD_SB_WORDS (MD_SB_BYTES / 4) +#define MD_SB_SECTORS (MD_SB_BYTES / 512) + +/* + * The following are counted in 32-bit words + */ +#define MD_SB_GENERIC_OFFSET 0 +#define MD_SB_PERSONALITY_OFFSET 64 +#define MD_SB_DISKS_OFFSET 128 +#define MD_SB_DESCRIPTOR_OFFSET 992 + +#define MD_SB_GENERIC_CONSTANT_WORDS 32 +#define MD_SB_GENERIC_STATE_WORDS 32 +#define MD_SB_GENERIC_WORDS (MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS) +#define MD_SB_PERSONALITY_WORDS 64 +#define MD_SB_DESCRIPTOR_WORDS 32 +#define MD_SB_DISKS 27 +#define MD_SB_DISKS_WORDS (MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS) +#define MD_SB_RESERVED_WORDS (1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS) +#define MD_SB_EQUAL_WORDS (MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS) + +/* + * Device "operational" state bits + */ +#define MD_DISK_FAULTY 0 /* disk is faulty / operational */ +#define MD_DISK_ACTIVE 1 /* disk is running or spare disk */ +#define MD_DISK_SYNC 2 /* disk is in sync with the raid set */ +#define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */ + +#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config. + * read requests will only be sent here in + * dire need + */ + +typedef struct mdp_device_descriptor_s { + __u32 number; /* 0 Device number in the entire set */ + __u32 major; /* 1 Device major number */ + __u32 minor; /* 2 Device minor number */ + __u32 raid_disk; /* 3 The role of the device in the raid set */ + __u32 state; /* 4 Operational state */ + __u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5]; +} mdp_disk_t; + +#define MD_SB_MAGIC 0xa92b4efc + +/* + * Superblock state bits + */ +#define MD_SB_CLEAN 0 +#define MD_SB_ERRORS 1 + +#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */ + +/* + * Notes: + * - if an array is being reshaped (restriped) in order to change the + * the number of active devices in the array, 'raid_disks' will be + * the larger of the old and new numbers. 'delta_disks' will + * be the "new - old". So if +ve, raid_disks is the new value, and + * "raid_disks-delta_disks" is the old. If -ve, raid_disks is the + * old value and "raid_disks+delta_disks" is the new (smaller) value. + */ + + +typedef struct mdp_superblock_s { + /* + * Constant generic information + */ + __u32 md_magic; /* 0 MD identifier */ + __u32 major_version; /* 1 major version to which the set conforms */ + __u32 minor_version; /* 2 minor version ... */ + __u32 patch_version; /* 3 patchlevel version ... */ + __u32 gvalid_words; /* 4 Number of used words in this section */ + __u32 set_uuid0; /* 5 Raid set identifier */ + __u32 ctime; /* 6 Creation time */ + __u32 level; /* 7 Raid personality */ + __u32 size; /* 8 Apparent size of each individual disk */ + __u32 nr_disks; /* 9 total disks in the raid set */ + __u32 raid_disks; /* 10 disks in a fully functional raid set */ + __u32 md_minor; /* 11 preferred MD minor device number */ + __u32 not_persistent; /* 12 does it have a persistent superblock */ + __u32 set_uuid1; /* 13 Raid set identifier #2 */ + __u32 set_uuid2; /* 14 Raid set identifier #3 */ + __u32 set_uuid3; /* 15 Raid set identifier #4 */ + __u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16]; + + /* + * Generic state information + */ + __u32 utime; /* 0 Superblock update time */ + __u32 state; /* 1 State bits (clean, ...) */ + __u32 active_disks; /* 2 Number of currently active disks */ + __u32 working_disks; /* 3 Number of working disks */ + __u32 failed_disks; /* 4 Number of failed disks */ + __u32 spare_disks; /* 5 Number of spare disks */ + __u32 sb_csum; /* 6 checksum of the whole superblock */ +#ifdef __BIG_ENDIAN + __u32 events_hi; /* 7 high-order of superblock update count */ + __u32 events_lo; /* 8 low-order of superblock update count */ + __u32 cp_events_hi; /* 9 high-order of checkpoint update count */ + __u32 cp_events_lo; /* 10 low-order of checkpoint update count */ +#else + __u32 events_lo; /* 7 low-order of superblock update count */ + __u32 events_hi; /* 8 high-order of superblock update count */ + __u32 cp_events_lo; /* 9 low-order of checkpoint update count */ + __u32 cp_events_hi; /* 10 high-order of checkpoint update count */ +#endif + __u32 recovery_cp; /* 11 recovery checkpoint sector count */ + /* There are only valid for minor_version > 90 */ + __u64 reshape_position; /* 12,13 next address in array-space for reshape */ + __u32 new_level; /* 14 new level we are reshaping to */ + __u32 delta_disks; /* 15 change in number of raid_disks */ + __u32 new_layout; /* 16 new layout */ + __u32 new_chunk; /* 17 new chunk size (bytes) */ + __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18]; + + /* + * Personality information + */ + __u32 layout; /* 0 the array's physical layout */ + __u32 chunk_size; /* 1 chunk size in bytes */ + __u32 root_pv; /* 2 LV root PV */ + __u32 root_block; /* 3 LV root block */ + __u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4]; + + /* + * Disks information + */ + mdp_disk_t disks[MD_SB_DISKS]; + + /* + * Reserved + */ + __u32 reserved[MD_SB_RESERVED_WORDS]; + + /* + * Active descriptor + */ + mdp_disk_t this_disk; + +} mdp_super_t; + +static inline __u64 md_event(mdp_super_t *sb) { + __u64 ev = sb->events_hi; + return (ev<<32)| sb->events_lo; +} + +#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1) + +/* + * The version-1 superblock : + * All numeric fields are little-endian. + * + * total size: 256 bytes plus 2 per device. + * 1K allows 384 devices. + */ +struct mdp_superblock_1 { + /* constant array information - 128 bytes */ + __le32 magic; /* MD_SB_MAGIC: 0xa92b4efc - little endian */ + __le32 major_version; /* 1 */ + __le32 feature_map; /* bit 0 set if 'bitmap_offset' is meaningful */ + __le32 pad0; /* always set to 0 when writing */ + + __u8 set_uuid[16]; /* user-space generated. */ + char set_name[32]; /* set and interpreted by user-space */ + + __le64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/ + __le32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */ + __le32 layout; /* only for raid5 and raid10 currently */ + __le64 size; /* used size of component devices, in 512byte sectors */ + + __le32 chunksize; /* in 512byte sectors */ + __le32 raid_disks; + __le32 bitmap_offset; /* sectors after start of superblock that bitmap starts + * NOTE: signed, so bitmap can be before superblock + * only meaningful of feature_map[0] is set. + */ + + /* These are only valid with feature bit '4' */ + __le32 new_level; /* new level we are reshaping to */ + __le64 reshape_position; /* next address in array-space for reshape */ + __le32 delta_disks; /* change in number of raid_disks */ + __le32 new_layout; /* new layout */ + __le32 new_chunk; /* new chunk size (512byte sectors) */ + __le32 new_offset; /* signed number to add to data_offset in new + * layout. 0 == no-change. This can be + * different on each device in the array. + */ + + /* constant this-device information - 64 bytes */ + __le64 data_offset; /* sector start of data, often 0 */ + __le64 data_size; /* sectors in this device that can be used for data */ + __le64 super_offset; /* sector start of this superblock */ + __le64 recovery_offset;/* sectors before this offset (from data_offset) have been recovered */ + __le32 dev_number; /* permanent identifier of this device - not role in raid */ + __le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */ + __u8 device_uuid[16]; /* user-space setable, ignored by kernel */ + __u8 devflags; /* per-device flags. Only one defined...*/ +#define WriteMostly1 1 /* mask for writemostly flag in above */ + /* Bad block log. If there are any bad blocks the feature flag is set. + * If offset and size are non-zero, that space is reserved and available + */ + __u8 bblog_shift; /* shift from sectors to block size */ + __le16 bblog_size; /* number of sectors reserved for list */ + __le32 bblog_offset; /* sector offset from superblock to bblog, + * signed - not unsigned */ + + /* array state information - 64 bytes */ + __le64 utime; /* 40 bits second, 24 bits microseconds */ + __le64 events; /* incremented when superblock updated */ + __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */ + __le32 sb_csum; /* checksum up to devs[max_dev] */ + __le32 max_dev; /* size of devs[] array to consider */ + __u8 pad3[64-32]; /* set to 0 when writing */ + + /* device state information. Indexed by dev_number. + * 2 bytes per device + * Note there are no per-device state flags. State information is rolled + * into the 'roles' value. If a device is spare or faulty, then it doesn't + * have a meaningful role. + */ + __le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */ +}; + +/* feature_map bits */ +#define MD_FEATURE_BITMAP_OFFSET 1 +#define MD_FEATURE_RECOVERY_OFFSET 2 /* recovery_offset is present and + * must be honoured + */ +#define MD_FEATURE_RESHAPE_ACTIVE 4 +#define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */ +#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an + * active device with same 'role'. + * 'recovery_offset' is also set. + */ +#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number + * of devices, but is going + * backwards anyway. + */ +#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */ +#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ + |MD_FEATURE_RECOVERY_OFFSET \ + |MD_FEATURE_RESHAPE_ACTIVE \ + |MD_FEATURE_BAD_BLOCKS \ + |MD_FEATURE_REPLACEMENT \ + |MD_FEATURE_RESHAPE_BACKWARDS \ + |MD_FEATURE_NEW_OFFSET \ + ) + +#endif diff --git a/include/uapi/linux/raid/md_u.h b/include/uapi/linux/raid/md_u.h new file mode 100644 index 000000000000..4133e744e4e6 --- /dev/null +++ b/include/uapi/linux/raid/md_u.h @@ -0,0 +1,155 @@ +/* + md_u.h : user <=> kernel API between Linux raidtools and RAID drivers + Copyright (C) 1998 Ingo Molnar + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + You should have received a copy of the GNU General Public License + (for example /usr/src/linux/COPYING); if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _UAPI_MD_U_H +#define _UAPI_MD_U_H + +/* + * Different major versions are not compatible. + * Different minor versions are only downward compatible. + * Different patchlevel versions are downward and upward compatible. + */ +#define MD_MAJOR_VERSION 0 +#define MD_MINOR_VERSION 90 +/* + * MD_PATCHLEVEL_VERSION indicates kernel functionality. + * >=1 means different superblock formats are selectable using SET_ARRAY_INFO + * and major_version/minor_version accordingly + * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT + * in the super status byte + * >=3 means that bitmap superblock version 4 is supported, which uses + * little-ending representation rather than host-endian + */ +#define MD_PATCHLEVEL_VERSION 3 + +/* ioctls */ + +/* status */ +#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t) +#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t) +#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t) +#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13) +#define RAID_AUTORUN _IO (MD_MAJOR, 0x14) +#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t) + +/* configuration */ +#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20) +#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t) +#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22) +#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t) +#define SET_DISK_INFO _IO (MD_MAJOR, 0x24) +#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25) +#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26) +#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27) +#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28) +#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29) +#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a) +#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int) + +/* usage */ +#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t) +/* 0x31 was START_ARRAY */ +#define STOP_ARRAY _IO (MD_MAJOR, 0x32) +#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33) +#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34) + +/* 63 partitions with the alternate major number (mdp) */ +#define MdpMinorShift 6 + +typedef struct mdu_version_s { + int major; + int minor; + int patchlevel; +} mdu_version_t; + +typedef struct mdu_array_info_s { + /* + * Generic constant information + */ + int major_version; + int minor_version; + int patch_version; + int ctime; + int level; + int size; + int nr_disks; + int raid_disks; + int md_minor; + int not_persistent; + + /* + * Generic state information + */ + int utime; /* 0 Superblock update time */ + int state; /* 1 State bits (clean, ...) */ + int active_disks; /* 2 Number of currently active disks */ + int working_disks; /* 3 Number of working disks */ + int failed_disks; /* 4 Number of failed disks */ + int spare_disks; /* 5 Number of spare disks */ + + /* + * Personality information + */ + int layout; /* 0 the array's physical layout */ + int chunk_size; /* 1 chunk size in bytes */ + +} mdu_array_info_t; + +/* non-obvious values for 'level' */ +#define LEVEL_MULTIPATH (-4) +#define LEVEL_LINEAR (-1) +#define LEVEL_FAULTY (-5) + +/* we need a value for 'no level specified' and 0 + * means 'raid0', so we need something else. This is + * for internal use only + */ +#define LEVEL_NONE (-1000000) + +typedef struct mdu_disk_info_s { + /* + * configuration/status of one particular disk + */ + int number; + int major; + int minor; + int raid_disk; + int state; + +} mdu_disk_info_t; + +typedef struct mdu_start_info_s { + /* + * configuration/status of one particular disk + */ + int major; + int minor; + int raid_disk; + int state; + +} mdu_start_info_t; + +typedef struct mdu_bitmap_file_s +{ + char pathname[4096]; +} mdu_bitmap_file_t; + +typedef struct mdu_param_s +{ + int personality; /* 1,2,3,4 */ + int chunk_size; /* in bytes */ + int max_fault; /* unused for now */ +} mdu_param_t; + +#endif /* _UAPI_MD_U_H */ diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index fcd768b09f6e..7a5eb196ade9 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -120,6 +120,18 @@ enum { RTM_SETDCB, #define RTM_SETDCB RTM_SETDCB + RTM_NEWNETCONF = 80, +#define RTM_NEWNETCONF RTM_NEWNETCONF + RTM_GETNETCONF = 82, +#define RTM_GETNETCONF RTM_GETNETCONF + + RTM_NEWMDB = 84, +#define RTM_NEWMDB RTM_NEWMDB + RTM_DELMDB = 85, +#define RTM_DELMDB RTM_DELMDB + RTM_GETMDB = 86, +#define RTM_GETMDB RTM_GETMDB + __RTM_MAX, #define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) }; @@ -222,6 +234,7 @@ enum { #define RTPROT_XORP 14 /* XORP */ #define RTPROT_NTK 15 /* Netsukuku */ #define RTPROT_DHCP 16 /* DHCP client */ +#define RTPROT_MROUTED 17 /* Multicast daemon */ /* rtm_scope @@ -283,6 +296,7 @@ enum rtattr_type_t { RTA_MP_ALGO, /* no longer used */ RTA_TABLE, RTA_MARK, + RTA_MFC_STATS, __RTA_MAX }; @@ -403,6 +417,12 @@ struct rta_session { } u; }; +struct rta_mfc_stats { + __u64 mfcs_packets; + __u64 mfcs_bytes; + __u64 mfcs_wrong_if; +}; + /**** * General form of address family dependent message. ****/ @@ -587,6 +607,12 @@ enum rtnetlink_groups { #define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE RTNLGRP_DCB, #define RTNLGRP_DCB RTNLGRP_DCB + RTNLGRP_IPV4_NETCONF, +#define RTNLGRP_IPV4_NETCONF RTNLGRP_IPV4_NETCONF + RTNLGRP_IPV6_NETCONF, +#define RTNLGRP_IPV6_NETCONF RTNLGRP_IPV6_NETCONF + RTNLGRP_MDB, +#define RTNLGRP_MDB RTNLGRP_MDB __RTNLGRP_MAX }; #define RTNLGRP_MAX (__RTNLGRP_MAX - 1) diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 7e1ab20adc03..2c6c85f18ea0 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -49,7 +49,9 @@ #define PORT_XR17D15X 21 /* Exar XR17D15x UART */ #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ -#define PORT_MAX_8250 23 /* max port ID */ +#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */ +#define PORT_BRCM_TRUMANAGE 24 +#define PORT_MAX_8250 25 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -215,5 +217,7 @@ /* Energy Micro efm32 SoC */ #define PORT_EFMUART 100 +/* ARC (Synopsys) on-chip UART */ +#define PORT_ARC 101 #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index 5ed325e88a81..e6322605b138 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -367,5 +367,23 @@ #define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ #define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ +/* + * These are definitions for the Exar XR17V35X and XR17(C|D)15X + */ +#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */ +#define UART_EXAR_SLEEP 0x8b /* Sleep mode */ +#define UART_EXAR_DVID 0x8d /* Device identification */ + +#define UART_EXAR_FCTR 0x08 /* Feature Control Register */ +#define UART_FCTR_EXAR_IRDA 0x08 /* IrDa data encode select */ +#define UART_FCTR_EXAR_485 0x10 /* Auto 485 half duplex dir ctl */ +#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */ +#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */ +#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */ +#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */ + +#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */ +#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */ + #endif /* _LINUX_SERIAL_REG_H */ diff --git a/include/uapi/linux/signal.h b/include/uapi/linux/signal.h index dff452ed6d00..e1bd50c29ded 100644 --- a/include/uapi/linux/signal.h +++ b/include/uapi/linux/signal.h @@ -4,5 +4,7 @@ #include <asm/signal.h> #include <asm/siginfo.h> +#define SS_ONSTACK 1 +#define SS_DISABLE 2 #endif /* _UAPI_LINUX_SIGNAL_H */ diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h index e811474724c2..0e011eb91b5d 100644 --- a/include/uapi/linux/swab.h +++ b/include/uapi/linux/swab.h @@ -45,7 +45,9 @@ static inline __attribute_const__ __u16 __fswab16(__u16 val) { -#ifdef __arch_swab16 +#ifdef __HAVE_BUILTIN_BSWAP16__ + return __builtin_bswap16(val); +#elif defined (__arch_swab16) return __arch_swab16(val); #else return ___constant_swab16(val); @@ -54,7 +56,9 @@ static inline __attribute_const__ __u16 __fswab16(__u16 val) static inline __attribute_const__ __u32 __fswab32(__u32 val) { -#ifdef __arch_swab32 +#ifdef __HAVE_BUILTIN_BSWAP32__ + return __builtin_bswap32(val); +#elif defined(__arch_swab32) return __arch_swab32(val); #else return ___constant_swab32(val); @@ -63,7 +67,9 @@ static inline __attribute_const__ __u32 __fswab32(__u32 val) static inline __attribute_const__ __u64 __fswab64(__u64 val) { -#ifdef __arch_swab64 +#ifdef __HAVE_BUILTIN_BSWAP64__ + return __builtin_bswap64(val); +#elif defined (__arch_swab64) return __arch_swab64(val); #elif defined(__SWAB_64_THRU_32__) __u32 h = val >> 32; diff --git a/include/uapi/linux/unix_diag.h b/include/uapi/linux/unix_diag.h index b1d2bf16b33c..b8a24941db21 100644 --- a/include/uapi/linux/unix_diag.h +++ b/include/uapi/linux/unix_diag.h @@ -37,6 +37,7 @@ enum { UNIX_DIAG_ICONS, UNIX_DIAG_RQLEN, UNIX_DIAG_MEMINFO, + UNIX_DIAG_SHUTDOWN, UNIX_DIAG_MAX, }; diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h index 81a927930bfd..f35aa0a338c7 100644 --- a/include/uapi/linux/usb/cdc.h +++ b/include/uapi/linux/usb/cdc.h @@ -19,6 +19,7 @@ #define USB_CDC_SUBCLASS_OBEX 0x0b #define USB_CDC_SUBCLASS_EEM 0x0c #define USB_CDC_SUBCLASS_NCM 0x0d +#define USB_CDC_SUBCLASS_MBIM 0x0e #define USB_CDC_PROTO_NONE 0 @@ -33,6 +34,7 @@ #define USB_CDC_PROTO_EEM 7 #define USB_CDC_NCM_PROTO_NTB 1 +#define USB_CDC_MBIM_PROTO_NTB 2 /*-------------------------------------------------------------------------*/ @@ -53,6 +55,7 @@ #define USB_CDC_DMM_TYPE 0x14 #define USB_CDC_OBEX_TYPE 0x15 #define USB_CDC_NCM_TYPE 0x1a +#define USB_CDC_MBIM_TYPE 0x1b /* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ struct usb_cdc_header_desc { @@ -187,6 +190,21 @@ struct usb_cdc_ncm_desc { __le16 bcdNcmVersion; __u8 bmNetworkCapabilities; } __attribute__ ((packed)); + +/* "MBIM Control Model Functional Descriptor" */ +struct usb_cdc_mbim_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdMBIMVersion; + __le16 wMaxControlMessage; + __u8 bNumberFilters; + __u8 bMaxFilterSize; + __le16 wMaxSegmentSize; + __u8 bmNetworkCapabilities; +} __attribute__ ((packed)); + /*-------------------------------------------------------------------------*/ /* @@ -332,6 +350,11 @@ struct usb_cdc_ncm_nth32 { #define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ #define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ +#define USB_CDC_MBIM_NDP16_IPS_SIGN 0x00535049 /* IPS<sessionID> : IPS0 for now */ +#define USB_CDC_MBIM_NDP32_IPS_SIGN 0x00737069 /* ips<sessionID> : ips0 for now */ +#define USB_CDC_MBIM_NDP16_DSS_SIGN 0x00535344 /* DSS<sessionID> */ +#define USB_CDC_MBIM_NDP32_DSS_SIGN 0x00737364 /* dss<sessionID> */ + /* 16-bit NCM Datagram Pointer Entry */ struct usb_cdc_ncm_dpe16 { __le16 wDatagramIndex; diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 57bfa59cda74..3cf3e946e331 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -186,6 +186,7 @@ enum v4l2_memory { V4L2_MEMORY_MMAP = 1, V4L2_MEMORY_USERPTR = 2, V4L2_MEMORY_OVERLAY = 3, + V4L2_MEMORY_DMABUF = 4, }; /* see also http://vektor.theorem.ca/graphics/ycbcr/ */ @@ -602,6 +603,8 @@ struct v4l2_requestbuffers { * should be passed to mmap() called on the video node) * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer * pointing to this plane + * @fd: when memory is V4L2_MEMORY_DMABUF, a userspace file + * descriptor associated with this plane * @data_offset: offset in the plane to the start of data; usually 0, * unless there is a header in front of the data * @@ -616,6 +619,7 @@ struct v4l2_plane { union { __u32 mem_offset; unsigned long userptr; + __s32 fd; } m; __u32 data_offset; __u32 reserved[11]; @@ -640,6 +644,8 @@ struct v4l2_plane { * (or a "cookie" that should be passed to mmap() as offset) * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR; * a userspace pointer pointing to this buffer + * @fd: for non-multiplanar buffers with memory == V4L2_MEMORY_DMABUF; + * a userspace file descriptor associated with this buffer * @planes: for multiplanar buffers; userspace pointer to the array of plane * info structs for this buffer * @length: size in bytes of the buffer (NOT its payload) for single-plane @@ -666,6 +672,7 @@ struct v4l2_buffer { __u32 offset; unsigned long userptr; struct v4l2_plane *planes; + __s32 fd; } m; __u32 length; __u32 reserved2; @@ -687,6 +694,33 @@ struct v4l2_buffer { #define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 #define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 +/** + * struct v4l2_exportbuffer - export of video buffer as DMABUF file descriptor + * + * @index: id number of the buffer + * @type: enum v4l2_buf_type; buffer type (type == *_MPLANE for + * multiplanar buffers); + * @plane: index of the plane to be exported, 0 for single plane queues + * @flags: flags for newly created file, currently only O_CLOEXEC is + * supported, refer to manual of open syscall for more details + * @fd: file descriptor associated with DMABUF (set by driver) + * + * Contains data used for exporting a video buffer as DMABUF file descriptor. + * The buffer is identified by a 'cookie' returned by VIDIOC_QUERYBUF + * (identical to the cookie used to mmap() the buffer to userspace). All + * reserved fields must be set to zero. The field reserved0 is expected to + * become a structure 'type' allowing an alternative layout of the structure + * content. Therefore this field should not be used for any other extensions. + */ +struct v4l2_exportbuffer { + __u32 type; /* enum v4l2_buf_type */ + __u32 index; + __u32 plane; + __u32 flags; + __s32 fd; + __u32 reserved[11]; +}; + /* * O V E R L A Y P R E V I E W */ @@ -737,7 +771,7 @@ struct v4l2_window { struct v4l2_captureparm { __u32 capability; /* Supported modes */ __u32 capturemode; /* Current mode */ - struct v4l2_fract timeperframe; /* Time per frame in .1us units */ + struct v4l2_fract timeperframe; /* Time per frame in seconds */ __u32 extendedmode; /* Driver-specific extensions */ __u32 readbuffers; /* # of buffers for read */ __u32 reserved[4]; @@ -1888,6 +1922,7 @@ struct v4l2_create_buffers { #define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer) #define VIDIOC_OVERLAY _IOW('V', 14, int) #define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer) +#define VIDIOC_EXPBUF _IOWR('V', 16, struct v4l2_exportbuffer) #define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer) #define VIDIOC_STREAMON _IOW('V', 18, int) #define VIDIOC_STREAMOFF _IOW('V', 19, int) diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h index 270fb22c5811..a7630d04029f 100644 --- a/include/uapi/linux/virtio_ids.h +++ b/include/uapi/linux/virtio_ids.h @@ -37,5 +37,6 @@ #define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ #define VIRTIO_ID_SCSI 8 /* virtio scsi */ #define VIRTIO_ID_9P 9 /* 9p virtio console */ +#define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index 2470f541af50..848e3584d7c8 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -51,6 +51,8 @@ #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ #define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the * network */ +#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow + * Steering */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ @@ -60,6 +62,11 @@ struct virtio_net_config { __u8 mac[6]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ __u16 status; + /* Maximum number of each of transmit and receive queues; + * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ. + * Legal values are between 1 and 0x8000 + */ + __u16 max_virtqueue_pairs; } __attribute__((packed)); /* This is the first element of the scatter-gather list. If you don't @@ -166,4 +173,24 @@ struct virtio_net_ctrl_mac { #define VIRTIO_NET_CTRL_ANNOUNCE 3 #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 +/* + * Control Receive Flow Steering + * + * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET + * enables Receive Flow Steering, specifying the number of the transmit and + * receive queues that will be used. After the command is consumed and acked by + * the device, the device will not steer new packets on receive virtqueues + * other than specified nor read from transmit virtqueues other than specified. + * Accordingly, driver should not transmit new packets on virtqueues other than + * specified. + */ +struct virtio_net_ctrl_mq { + u16 virtqueue_pairs; +}; + +#define VIRTIO_NET_CTRL_MQ 4 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000 + #endif /* _LINUX_VIRTIO_NET_H */ |