diff options
Diffstat (limited to 'include/uapi/linux')
| -rw-r--r-- | include/uapi/linux/coresight-stm.h | 21 | ||||
| -rw-r--r-- | include/uapi/linux/iio/types.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/libc-compat.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/serial_core.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/sync_file.h | 100 | ||||
| -rw-r--r-- | include/uapi/linux/tty_flags.h | 13 | ||||
| -rw-r--r-- | include/uapi/linux/usb/ch9.h | 121 | ||||
| -rw-r--r-- | include/uapi/linux/vt.h | 1 |
8 files changed, 260 insertions, 3 deletions
diff --git a/include/uapi/linux/coresight-stm.h b/include/uapi/linux/coresight-stm.h new file mode 100644 index 000000000000..7e4272cf1fb2 --- /dev/null +++ b/include/uapi/linux/coresight-stm.h @@ -0,0 +1,21 @@ +#ifndef __UAPI_CORESIGHT_STM_H_ +#define __UAPI_CORESIGHT_STM_H_ + +#define STM_FLAG_TIMESTAMPED BIT(3) +#define STM_FLAG_GUARANTEED BIT(7) + +/* + * The CoreSight STM supports guaranteed and invariant timing + * transactions. Guaranteed transactions are guaranteed to be + * traced, this might involve stalling the bus or system to + * ensure the transaction is accepted by the STM. While invariant + * timing transactions are not guaranteed to be traced, they + * will take an invariant amount of time regardless of the + * state of the STM. + */ +enum { + STM_OPTION_GUARANTEED = 0, + STM_OPTION_INVARIANT, +}; + +#endif diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index c077617f3304..b0916fc72cce 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -38,6 +38,7 @@ enum iio_chan_type { IIO_CONCENTRATION, IIO_RESISTANCE, IIO_PH, + IIO_UVINDEX, }; enum iio_modifier { @@ -77,6 +78,7 @@ enum iio_modifier { IIO_MOD_Q, IIO_MOD_CO2, IIO_MOD_VOC, + IIO_MOD_LIGHT_UV, }; enum iio_event_type { diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h index d5e38c73377c..e4f048ee7043 100644 --- a/include/uapi/linux/libc-compat.h +++ b/include/uapi/linux/libc-compat.h @@ -52,7 +52,7 @@ #if defined(__GLIBC__) /* Coordinate with glibc net/if.h header. */ -#if defined(_NET_IF_H) +#if defined(_NET_IF_H) && defined(__USE_MISC) /* GLIBC headers included first so don't define anything * that would already be defined. */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 24da334af7f1..99dbed8a8874 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -267,4 +267,7 @@ /* Microchip PIC32 UART */ #define PORT_PIC32 115 +/* MPS2 UART */ +#define PORT_MPS2UART 116 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/sync_file.h b/include/uapi/linux/sync_file.h new file mode 100644 index 000000000000..413303d37b56 --- /dev/null +++ b/include/uapi/linux/sync_file.h @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2012 Google, Inc. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _UAPI_LINUX_SYNC_H +#define _UAPI_LINUX_SYNC_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +/** + * struct sync_merge_data - data passed to merge ioctl + * @name: name of new fence + * @fd2: file descriptor of second fence + * @fence: returns the fd of the new fence to userspace + * @flags: merge_data flags + * @pad: padding for 64-bit alignment, should always be zero + */ +struct sync_merge_data { + char name[32]; + __s32 fd2; + __s32 fence; + __u32 flags; + __u32 pad; +}; + +/** + * struct sync_fence_info - detailed fence information + * @obj_name: name of parent sync_timeline +* @driver_name: name of driver implementing the parent +* @status: status of the fence 0:active 1:signaled <0:error + * @flags: fence_info flags + * @timestamp_ns: timestamp of status change in nanoseconds + */ +struct sync_fence_info { + char obj_name[32]; + char driver_name[32]; + __s32 status; + __u32 flags; + __u64 timestamp_ns; +}; + +/** + * struct sync_file_info - data returned from fence info ioctl + * @name: name of fence + * @status: status of fence. 1: signaled 0:active <0:error + * @flags: sync_file_info flags + * @num_fences number of fences in the sync_file + * @pad: padding for 64-bit alignment, should always be zero + * @sync_fence_info: pointer to array of structs sync_fence_info with all + * fences in the sync_file + */ +struct sync_file_info { + char name[32]; + __s32 status; + __u32 flags; + __u32 num_fences; + __u32 pad; + + __u64 sync_fence_info; +}; + +#define SYNC_IOC_MAGIC '>' + +/** + * Opcodes 0, 1 and 2 were burned during a API change to avoid users of the + * old API to get weird errors when trying to handling sync_files. The API + * change happened during the de-stage of the Sync Framework when there was + * no upstream users available. + */ + +/** + * DOC: SYNC_IOC_MERGE - merge two fences + * + * Takes a struct sync_merge_data. Creates a new fence containing copies of + * the sync_pts in both the calling fd and sync_merge_data.fd2. Returns the + * new fence's fd in sync_merge_data.fence + */ +#define SYNC_IOC_MERGE _IOWR(SYNC_IOC_MAGIC, 3, struct sync_merge_data) + +/** + * DOC: SYNC_IOC_FENCE_INFO - get detailed information on a fence + * + * Takes a struct sync_file_info_data with extra space allocated for pt_info. + * Caller should write the size of the buffer into len. On return, len is + * updated to reflect the total size of the sync_file_info_data including + * pt_info. + * + * pt_info is a buffer containing sync_pt_infos for every sync_pt in the fence. + * To iterate over the sync_pt_infos, use the sync_pt_info.len field. + */ +#define SYNC_IOC_FILE_INFO _IOWR(SYNC_IOC_MAGIC, 4, struct sync_file_info) + +#endif /* _UAPI_LINUX_SYNC_H */ diff --git a/include/uapi/linux/tty_flags.h b/include/uapi/linux/tty_flags.h index 072e41e45ee2..66e4d8bcb16f 100644 --- a/include/uapi/linux/tty_flags.h +++ b/include/uapi/linux/tty_flags.h @@ -32,7 +32,13 @@ #define ASYNCB_MAGIC_MULTIPLIER 16 /* Use special CLK or divisor */ #define ASYNCB_LAST_USER 16 -/* Internal flags used only by kernel */ +/* + * Internal flags used only by kernel (read-only) + * + * WARNING: These flags are no longer used and have been superceded by the + * TTY_PORT_ flags in the iflags field (and not userspace-visible) + */ +#ifndef _KERNEL_ #define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ #define ASYNCB_SUSPENDED 30 /* Serial port is suspended */ #define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ @@ -43,7 +49,9 @@ #define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */ #define ASYNCB_CONS_FLOW 23 /* flow control for console */ #define ASYNCB_FIRST_KERNEL 22 +#endif +/* Masks */ #define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY) #define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED) #define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT) @@ -72,6 +80,8 @@ #define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) #define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) +#ifndef _KERNEL_ +/* These flags are no longer used (and were always masked from userspace) */ #define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED) #define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE) #define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF) @@ -81,5 +91,6 @@ #define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ) #define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW) #define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1)) +#endif #endif diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index d5ce71607972..a8acc24765fe 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -105,6 +105,13 @@ #define USB_REQ_LOOPBACK_DATA_READ 0x16 #define USB_REQ_SET_INTERFACE_DS 0x17 +/* specific requests for USB Power Delivery */ +#define USB_REQ_GET_PARTNER_PDO 20 +#define USB_REQ_GET_BATTERY_STATUS 21 +#define USB_REQ_SET_PDO 22 +#define USB_REQ_GET_VDM 23 +#define USB_REQ_SEND_VDM 24 + /* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, * used by hubs to put ports into a new L1 suspend state, except that it * forgot to define its number ... @@ -165,6 +172,22 @@ #define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ #define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ +/* + * Feature selectors from Table 9-8 USB Power Delivery spec + */ +#define USB_DEVICE_BATTERY_WAKE_MASK 40 +#define USB_DEVICE_OS_IS_PD_AWARE 41 +#define USB_DEVICE_POLICY_MODE 42 +#define USB_PORT_PR_SWAP 43 +#define USB_PORT_GOTO_MIN 44 +#define USB_PORT_RETURN_POWER 45 +#define USB_PORT_ACCEPT_PD_REQUEST 46 +#define USB_PORT_REJECT_PD_REQUEST 47 +#define USB_PORT_PORT_PD_RESET 48 +#define USB_PORT_C_PORT_PD_CHANGE 49 +#define USB_PORT_CABLE_PD_RESET 50 +#define USB_DEVICE_CHARGING_POLICY 54 + /** * struct usb_ctrlrequest - SETUP data for a USB device control request * @bRequestType: matches the USB bmRequestType field @@ -914,6 +937,104 @@ struct usb_ssp_cap_descriptor { } __attribute__((packed)); /* + * USB Power Delivery Capability Descriptor: + * Defines capabilities for PD + */ +/* Defines the various PD Capabilities of this device */ +#define USB_PD_POWER_DELIVERY_CAPABILITY 0x06 +/* Provides information on each battery supported by the device */ +#define USB_PD_BATTERY_INFO_CAPABILITY 0x07 +/* The Consumer characteristics of a Port on the device */ +#define USB_PD_PD_CONSUMER_PORT_CAPABILITY 0x08 +/* The provider characteristics of a Port on the device */ +#define USB_PD_PD_PROVIDER_PORT_CAPABILITY 0x09 + +struct usb_pd_cap_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; /* set to USB_PD_POWER_DELIVERY_CAPABILITY */ + __u8 bReserved; + __le32 bmAttributes; +#define USB_PD_CAP_BATTERY_CHARGING (1 << 1) /* supports Battery Charging specification */ +#define USB_PD_CAP_USB_PD (1 << 2) /* supports USB Power Delivery specification */ +#define USB_PD_CAP_PROVIDER (1 << 3) /* can provide power */ +#define USB_PD_CAP_CONSUMER (1 << 4) /* can consume power */ +#define USB_PD_CAP_CHARGING_POLICY (1 << 5) /* supports CHARGING_POLICY feature */ +#define USB_PD_CAP_TYPE_C_CURRENT (1 << 6) /* supports power capabilities defined in the USB Type-C Specification */ + +#define USB_PD_CAP_PWR_AC (1 << 8) +#define USB_PD_CAP_PWR_BAT (1 << 9) +#define USB_PD_CAP_PWR_USE_V_BUS (1 << 14) + + __le16 bmProviderPorts; /* Bit zero refers to the UFP of the device */ + __le16 bmConsumerPorts; + __le16 bcdBCVersion; + __le16 bcdPDVersion; + __le16 bcdUSBTypeCVersion; +} __attribute__((packed)); + +struct usb_pd_cap_battery_info_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + /* Index of string descriptor shall contain the user friendly name for this battery */ + __u8 iBattery; + /* Index of string descriptor shall contain the Serial Number String for this battery */ + __u8 iSerial; + __u8 iManufacturer; + __u8 bBatteryId; /* uniquely identifies this battery in status Messages */ + __u8 bReserved; + /* + * Shall contain the Battery Charge value above which this + * battery is considered to be fully charged but not necessarily + * “topped off.” + */ + __le32 dwChargedThreshold; /* in mWh */ + /* + * Shall contain the minimum charge level of this battery such + * that above this threshold, a device can be assured of being + * able to power up successfully (see Battery Charging 1.2). + */ + __le32 dwWeakThreshold; /* in mWh */ + __le32 dwBatteryDesignCapacity; /* in mWh */ + __le32 dwBatteryLastFullchargeCapacity; /* in mWh */ +} __attribute__((packed)); + +struct usb_pd_cap_consumer_port_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 bmCapabilities; +/* port will oerate under: */ +#define USB_PD_CAP_CONSUMER_BC (1 << 0) /* BC */ +#define USB_PD_CAP_CONSUMER_PD (1 << 1) /* PD */ +#define USB_PD_CAP_CONSUMER_TYPE_C (1 << 2) /* USB Type-C Current */ + __le16 wMinVoltage; /* in 50mV units */ + __le16 wMaxVoltage; /* in 50mV units */ + __u16 wReserved; + __le32 dwMaxOperatingPower; /* in 10 mW - operating at steady state */ + __le32 dwMaxPeakPower; /* in 10mW units - operating at peak power */ + __le32 dwMaxPeakPowerTime; /* in 100ms units - duration of peak */ +#define USB_PD_CAP_CONSUMER_UNKNOWN_PEAK_POWER_TIME 0xffff +} __attribute__((packed)); + +struct usb_pd_cap_provider_port_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved1; + __u8 bmCapabilities; +/* port will oerate under: */ +#define USB_PD_CAP_PROVIDER_BC (1 << 0) /* BC */ +#define USB_PD_CAP_PROVIDER_PD (1 << 1) /* PD */ +#define USB_PD_CAP_PROVIDER_TYPE_C (1 << 2) /* USB Type-C Current */ + __u8 bNumOfPDObjects; + __u8 bReserved2; + __le32 wPowerDataObject[]; +} __attribute__((packed)); + +/* * Precision time measurement capability descriptor: advertised by devices and * hubs that support PTM */ diff --git a/include/uapi/linux/vt.h b/include/uapi/linux/vt.h index 978578bd1895..f69034887e68 100644 --- a/include/uapi/linux/vt.h +++ b/include/uapi/linux/vt.h @@ -8,7 +8,6 @@ */ #define MIN_NR_CONSOLES 1 /* must be at least 1 */ #define MAX_NR_CONSOLES 63 /* serial lines start at 64 */ -#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */ /* Note: the ioctl VT_GETSTATE does not work for consoles 16 and higher (since it returns a short) */ |