summaryrefslogtreecommitdiff
path: root/include/net
diff options
context:
space:
mode:
Diffstat (limited to 'include/net')
-rw-r--r--include/net/cfg80211.h89
-rw-r--r--include/net/ieee80211_radiotap.h7
-rw-r--r--include/net/mac80211.h14
3 files changed, 76 insertions, 34 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 26b5b692c22b..6dd19593e333 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -753,6 +753,8 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
* @STATION_INFO_LOCAL_PM: @local_pm filled
* @STATION_INFO_PEER_PM: @peer_pm filled
* @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
+ * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
+ * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
*/
enum station_info_flags {
STATION_INFO_INACTIVE_TIME = 1<<0,
@@ -781,6 +783,8 @@ enum station_info_flags {
STATION_INFO_NONPEER_PM = 1<<23,
STATION_INFO_RX_BYTES64 = 1<<24,
STATION_INFO_TX_BYTES64 = 1<<25,
+ STATION_INFO_CHAIN_SIGNAL = 1<<26,
+ STATION_INFO_CHAIN_SIGNAL_AVG = 1<<27,
};
/**
@@ -857,6 +861,8 @@ struct sta_bss_parameters {
u16 beacon_interval;
};
+#define IEEE80211_MAX_CHAINS 4
+
/**
* struct station_info - station information
*
@@ -874,6 +880,9 @@ struct sta_bss_parameters {
* For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
* @signal_avg: Average signal strength, type depends on the wiphy's signal_type.
* For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @chains: bitmask for filled values in @chain_signal, @chain_signal_avg
+ * @chain_signal: per-chain signal strength of last received packet in dBm
+ * @chain_signal_avg: per-chain signal strength average in dBm
* @txrate: current unicast bitrate from this station
* @rxrate: current unicast bitrate to this station
* @rx_packets: packets received from this station
@@ -909,6 +918,11 @@ struct station_info {
u8 plink_state;
s8 signal;
s8 signal_avg;
+
+ u8 chains;
+ s8 chain_signal[IEEE80211_MAX_CHAINS];
+ s8 chain_signal_avg[IEEE80211_MAX_CHAINS];
+
struct rate_info txrate;
struct rate_info rxrate;
u32 rx_packets;
@@ -947,6 +961,7 @@ struct station_info {
* @MONITOR_FLAG_CONTROL: pass control frames
* @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
* @MONITOR_FLAG_COOK_FRAMES: report frames after processing
+ * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address
*/
enum monitor_flags {
MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL,
@@ -954,6 +969,7 @@ enum monitor_flags {
MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL,
MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS,
MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
+ MONITOR_FLAG_ACTIVE = 1<<NL80211_MNTR_FLAG_ACTIVE,
};
/**
@@ -1147,6 +1163,7 @@ struct mesh_config {
* @sync_method: which synchronization method to use
* @path_sel_proto: which path selection protocol to use
* @path_metric: which metric to use
+ * @auth_id: which authentication method this mesh is using
* @ie: vendor information elements (optional)
* @ie_len: length of vendor information elements
* @is_authenticated: this mesh requires authentication
@@ -1165,6 +1182,7 @@ struct mesh_setup {
u8 sync_method;
u8 path_sel_proto;
u8 path_metric;
+ u8 auth_id;
const u8 *ie;
u8 ie_len;
bool is_authenticated;
@@ -1241,6 +1259,7 @@ struct cfg80211_ssid {
* @scan_start: time (in jiffies) when the scan started
* @wdev: the wireless device to scan for
* @aborted: (internal) scan request was notified as aborted
+ * @notified: (internal) scan request was notified as done or aborted
* @no_cck: used to send probe requests at non CCK rate in 2GHz band
*/
struct cfg80211_scan_request {
@@ -1258,7 +1277,7 @@ struct cfg80211_scan_request {
/* internal */
struct wiphy *wiphy;
unsigned long scan_start;
- bool aborted;
+ bool aborted, notified;
bool no_cck;
/* keep last */
@@ -1850,7 +1869,9 @@ struct cfg80211_update_ft_ies_params {
* @get_mpath: get a mesh path for the given parameters
* @dump_mpath: dump mesh path callback -- resume dump at index @idx
* @join_mesh: join the mesh network with the specified parameters
+ * (invoked with the wireless_dev mutex held)
* @leave_mesh: leave the current mesh network
+ * (invoked with the wireless_dev mutex held)
*
* @get_mesh_config: Get the current mesh configuration
*
@@ -1877,20 +1898,28 @@ struct cfg80211_update_ft_ies_params {
* the scan/scan_done bracket too.
*
* @auth: Request to authenticate with the specified peer
+ * (invoked with the wireless_dev mutex held)
* @assoc: Request to (re)associate with the specified peer
+ * (invoked with the wireless_dev mutex held)
* @deauth: Request to deauthenticate from the specified peer
+ * (invoked with the wireless_dev mutex held)
* @disassoc: Request to disassociate from the specified peer
+ * (invoked with the wireless_dev mutex held)
*
* @connect: Connect to the ESS with the specified parameters. When connected,
* call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
* If the connection fails for some reason, call cfg80211_connect_result()
* with the status from the AP.
+ * (invoked with the wireless_dev mutex held)
* @disconnect: Disconnect from the BSS/ESS.
+ * (invoked with the wireless_dev mutex held)
*
* @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
* cfg80211_ibss_joined(), also call that function when changing BSSID due
* to a merge.
+ * (invoked with the wireless_dev mutex held)
* @leave_ibss: Leave the IBSS.
+ * (invoked with the wireless_dev mutex held)
*
* @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or
* MESH mode)
@@ -2556,6 +2585,9 @@ struct wiphy_wowlan_support {
* may request, if implemented.
*
* @wowlan: WoWLAN support information
+ * @wowlan_config: current WoWLAN configuration; this should usually not be
+ * used since access to it is necessarily racy, use the parameter passed
+ * to the suspend() operation instead.
*
* @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
* @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden.
@@ -2623,6 +2655,7 @@ struct wiphy {
#ifdef CONFIG_PM
struct wiphy_wowlan_support wowlan;
+ struct cfg80211_wowlan *wowlan_config;
#endif
u16 max_remain_on_channel_duration;
@@ -2834,8 +2867,8 @@ struct cfg80211_cached_keys;
* by cfg80211 on change_interface
* @mgmt_registrations: list of registrations for management frames
* @mgmt_registrations_lock: lock for the list
- * @mtx: mutex used to lock data in this struct
- * @cleanup_work: work struct used for cleanup that can't be done directly
+ * @mtx: mutex used to lock data in this struct, may be used by drivers
+ * and some API functions require it held
* @beacon_interval: beacon interval used on this device for transmitting
* beacons, 0 when not valid
* @address: The address for this device, valid only if @netdev is %NULL
@@ -2858,8 +2891,6 @@ struct wireless_dev {
struct mutex mtx;
- struct work_struct cleanup_work;
-
bool use_4addr, p2p_started;
u8 address[ETH_ALEN] __aligned(sizeof(u16));
@@ -2989,6 +3020,15 @@ struct ieee80211_rate *
ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
u32 basic_rates, int bitrate);
+/**
+ * ieee80211_mandatory_rates - get mandatory rates for a given band
+ * @sband: the band to look for rates in
+ *
+ * This function returns a bitmap of the mandatory rates for the given
+ * band, bits are set according to the rate position in the bitrates array.
+ */
+u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband);
+
/*
* Radiotap parsing functions -- for controlled injection support
*
@@ -3400,7 +3440,8 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
* This function is called whenever an authentication has been processed in
* station mode. The driver is required to call either this function or
* cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
- * call. This function may sleep.
+ * call. This function may sleep. The caller must hold the corresponding wdev's
+ * mutex.
*/
void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
@@ -3409,7 +3450,8 @@ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
* @dev: network device
* @addr: The MAC address of the device with which the authentication timed out
*
- * This function may sleep.
+ * This function may sleep. The caller must hold the corresponding wdev's
+ * mutex.
*/
void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
@@ -3424,7 +3466,8 @@ void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
* This function is called whenever a (re)association response has been
* processed in station mode. The driver is required to call either this
* function or cfg80211_send_assoc_timeout() to indicate the result of
- * cfg80211_ops::assoc() call. This function may sleep.
+ * cfg80211_ops::assoc() call. This function may sleep. The caller must hold
+ * the corresponding wdev's mutex.
*/
void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss,
const u8 *buf, size_t len);
@@ -3434,7 +3477,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss,
* @dev: network device
* @addr: The MAC address of the device with which the association timed out
*
- * This function may sleep.
+ * This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
@@ -3446,21 +3489,12 @@ void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
*
* This function is called whenever deauthentication has been processed in
* station mode. This includes both received deauthentication frames and
- * locally generated ones. This function may sleep.
+ * locally generated ones. This function may sleep. The caller must hold the
+ * corresponding wdev's mutex.
*/
void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
/**
- * __cfg80211_send_deauth - notification of processed deauthentication
- * @dev: network device
- * @buf: deauthentication frame (header + body)
- * @len: length of the frame data
- *
- * Like cfg80211_send_deauth(), but doesn't take the wdev lock.
- */
-void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
-
-/**
* cfg80211_send_disassoc - notification of processed disassociation
* @dev: network device
* @buf: disassociation response frame (header + body)
@@ -3468,22 +3502,12 @@ void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
*
* This function is called whenever disassociation has been processed in
* station mode. This includes both received disassociation frames and locally
- * generated ones. This function may sleep.
+ * generated ones. This function may sleep. The caller must hold the
+ * corresponding wdev's mutex.
*/
void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
/**
- * __cfg80211_send_disassoc - notification of processed disassociation
- * @dev: network device
- * @buf: disassociation response frame (header + body)
- * @len: length of the frame data
- *
- * Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
- */
-void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
- size_t len);
-
-/**
* cfg80211_send_unprot_deauth - notification of unprotected deauthentication
* @dev: network device
* @buf: deauthentication frame (header + body)
@@ -4153,6 +4177,7 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev,
* cfg80211_crit_proto_stopped() - indicate critical protocol stopped by driver.
*
* @wdev: the wireless device for which critical protocol is stopped.
+ * @gfp: allocation flags
*
* This function can be called by the driver to indicate it has reverted
* operation back to normal. One reason could be that the duration given
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index c3999632e616..c6d07cb074bc 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -269,6 +269,7 @@ enum ieee80211_radiotap_type {
#define IEEE80211_RADIOTAP_MCS_HAVE_GI 0x04
#define IEEE80211_RADIOTAP_MCS_HAVE_FMT 0x08
#define IEEE80211_RADIOTAP_MCS_HAVE_FEC 0x10
+#define IEEE80211_RADIOTAP_MCS_HAVE_STBC 0x20
#define IEEE80211_RADIOTAP_MCS_BW_MASK 0x03
#define IEEE80211_RADIOTAP_MCS_BW_20 0
@@ -278,6 +279,12 @@ enum ieee80211_radiotap_type {
#define IEEE80211_RADIOTAP_MCS_SGI 0x04
#define IEEE80211_RADIOTAP_MCS_FMT_GF 0x08
#define IEEE80211_RADIOTAP_MCS_FEC_LDPC 0x10
+#define IEEE80211_RADIOTAP_MCS_STBC_MASK 0x60
+#define IEEE80211_RADIOTAP_MCS_STBC_1 1
+#define IEEE80211_RADIOTAP_MCS_STBC_2 2
+#define IEEE80211_RADIOTAP_MCS_STBC_3 3
+
+#define IEEE80211_RADIOTAP_MCS_STBC_SHIFT 5
/* For IEEE80211_RADIOTAP_AMPDU_STATUS */
#define IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN 0x0001
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 885898a40d13..1f0014bd4d87 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -805,6 +805,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* on this subframe
* @RX_FLAG_AMPDU_DELIM_CRC_KNOWN: The delimiter CRC field is known (the CRC
* is stored in the @ampdu_delimiter_crc field)
+ * @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
*/
enum mac80211_rx_flags {
RX_FLAG_MMIC_ERROR = BIT(0),
@@ -832,8 +833,11 @@ enum mac80211_rx_flags {
RX_FLAG_80MHZ = BIT(23),
RX_FLAG_80P80MHZ = BIT(24),
RX_FLAG_160MHZ = BIT(25),
+ RX_FLAG_STBC_MASK = BIT(26) | BIT(27),
};
+#define RX_FLAG_STBC_SHIFT 26
+
/**
* struct ieee80211_rx_status - receive status
*
@@ -850,6 +854,10 @@ enum mac80211_rx_flags {
* @signal: signal strength when receiving this frame, either in dBm, in dB or
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
+ * @chains: bitmask of receive chains for which separate signal strength
+ * values were filled.
+ * @chain_signal: per-chain signal strength, in dBm (unlike @signal, doesn't
+ * support dB or unspecified units)
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
@@ -881,6 +889,8 @@ struct ieee80211_rx_status {
u8 band;
u8 antenna;
s8 signal;
+ u8 chains;
+ s8 chain_signal[IEEE80211_MAX_CHAINS];
u8 ampdu_delimiter_crc;
u8 vendor_radiotap_align;
u8 vendor_radiotap_oui[3];
@@ -1235,7 +1245,7 @@ enum ieee80211_sta_rx_bandwidth {
* struct ieee80211_sta_rates - station rate selection table
*
* @rcu_head: RCU head used for freeing the table on update
- * @rates: transmit rates/flags to be used by default.
+ * @rate: transmit rates/flags to be used by default.
* Overriding entries per-packet is possible by using cb tx control.
*/
struct ieee80211_sta_rates {
@@ -1276,7 +1286,7 @@ struct ieee80211_sta_rates {
* notifications and capabilities. The value is only valid after
* the station moves to associated state.
* @smps_mode: current SMPS mode (off, static or dynamic)
- * @tx_rates: rate control selection table
+ * @rates: rate control selection table
*/
struct ieee80211_sta {
u32 supp_rates[IEEE80211_NUM_BANDS];
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-02 21:56:14 +0300