diff options
Diffstat (limited to 'include/net')
| -rw-r--r-- | include/net/bluetooth/amp.h | 4 | ||||
| -rw-r--r-- | include/net/bluetooth/hci.h | 29 | ||||
| -rw-r--r-- | include/net/bluetooth/hci_core.h | 48 | ||||
| -rw-r--r-- | include/net/bluetooth/l2cap.h | 38 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 223 | ||||
| -rw-r--r-- | include/net/mac80211.h | 158 | ||||
| -rw-r--r-- | include/net/nfc/hci.h | 3 |
7 files changed, 412 insertions, 91 deletions
diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index 2e7c79ea0463..7ea3db77ba89 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -46,5 +46,9 @@ void amp_accept_phylink(struct hci_dev *hdev, struct amp_mgr *mgr, struct hci_conn *hcon); void amp_write_remote_assoc(struct hci_dev *hdev, u8 handle); void amp_write_rem_assoc_continue(struct hci_dev *hdev, u8 handle); +void amp_physical_cfm(struct hci_conn *bredr_hcon, struct hci_conn *hs_hcon); +void amp_create_logical_link(struct l2cap_chan *chan); +void amp_disconnect_logical_link(struct hci_chan *hchan); +void amp_destroy_logical_link(struct hci_chan *hchan, u8 reason); #endif /* __AMP_H */ diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 88cbbda61027..45eee08157bb 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -115,6 +115,7 @@ enum { HCI_SSP_ENABLED, HCI_HS_ENABLED, HCI_LE_ENABLED, + HCI_LE_PERIPHERAL, HCI_CONNECTABLE, HCI_DISCOVERABLE, HCI_LINK_SECURITY, @@ -153,7 +154,7 @@ enum { #define HCI_DISCONN_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */ #define HCI_PAIRING_TIMEOUT msecs_to_jiffies(60000) /* 60 seconds */ #define HCI_INIT_TIMEOUT msecs_to_jiffies(10000) /* 10 seconds */ -#define HCI_CMD_TIMEOUT msecs_to_jiffies(1000) /* 1 second */ +#define HCI_CMD_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */ #define HCI_ACL_TX_TIMEOUT msecs_to_jiffies(45000) /* 45 seconds */ #define HCI_AUTO_OFF_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */ @@ -318,6 +319,9 @@ enum { #define HCI_FLOW_CTL_MODE_PACKET_BASED 0x00 #define HCI_FLOW_CTL_MODE_BLOCK_BASED 0x01 +/* The core spec defines 127 as the "not available" value */ +#define HCI_TX_POWER_INVALID 127 + /* Extended Inquiry Response field types */ #define EIR_FLAGS 0x01 /* flags */ #define EIR_UUID16_SOME 0x02 /* 16-bit UUID, more available */ @@ -334,6 +338,13 @@ enum { #define EIR_SSP_RAND_R 0x0F /* Simple Pairing Randomizer R */ #define EIR_DEVICE_ID 0x10 /* device ID */ +/* Low Energy Advertising Flags */ +#define LE_AD_LIMITED 0x01 /* Limited Discoverable */ +#define LE_AD_GENERAL 0x02 /* General Discoverable */ +#define LE_AD_NO_BREDR 0x04 /* BR/EDR not supported */ +#define LE_AD_SIM_LE_BREDR_CTRL 0x08 /* Simultaneous LE & BR/EDR Controller */ +#define LE_AD_SIM_LE_BREDR_HOST 0x10 /* Simultaneous LE & BR/EDR Host */ + /* ----- HCI Commands ---- */ #define HCI_OP_NOP 0x0000 @@ -932,6 +943,22 @@ struct hci_rp_le_read_buffer_size { __u8 le_max_pkt; } __packed; +#define HCI_OP_LE_READ_ADV_TX_POWER 0x2007 +struct hci_rp_le_read_adv_tx_power { + __u8 status; + __s8 tx_power; +} __packed; + +#define HCI_MAX_AD_LENGTH 31 + +#define HCI_OP_LE_SET_ADV_DATA 0x2008 +struct hci_cp_le_set_adv_data { + __u8 length; + __u8 data[HCI_MAX_AD_LENGTH]; +} __packed; + +#define HCI_OP_LE_SET_ADV_ENABLE 0x200a + #define HCI_OP_LE_SET_SCAN_PARAM 0x200b struct hci_cp_le_set_scan_param { __u8 type; diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 9fe8e2dec870..ef5b85dac3f7 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -278,6 +278,10 @@ struct hci_dev { struct work_struct le_scan; struct le_scan_params le_scan_params; + __s8 adv_tx_power; + __u8 adv_data[HCI_MAX_AD_LENGTH]; + __u8 adv_data_len; + int (*open)(struct hci_dev *hdev); int (*close)(struct hci_dev *hdev); int (*flush)(struct hci_dev *hdev); @@ -355,6 +359,7 @@ struct hci_chan { struct hci_conn *conn; struct sk_buff_head data_q; unsigned int sent; + __u8 state; }; extern struct list_head hci_dev_list; @@ -682,7 +687,7 @@ static inline uint8_t __hci_num_ctrl(void) } struct hci_dev *hci_dev_get(int index); -struct hci_dev *hci_get_route(bdaddr_t *src, bdaddr_t *dst); +struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src); struct hci_dev *hci_alloc_dev(void); void hci_free_dev(struct hci_dev *hdev); @@ -731,6 +736,8 @@ int hci_add_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *hash, u8 *randomizer); int hci_remove_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr); +int hci_update_ad(struct hci_dev *hdev); + void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb); int hci_recv_frame(struct sk_buff *skb); @@ -747,18 +754,29 @@ void hci_conn_del_sysfs(struct hci_conn *conn); #define SET_HCIDEV_DEV(hdev, pdev) ((hdev)->dev.parent = (pdev)) /* ----- LMP capabilities ----- */ -#define lmp_rswitch_capable(dev) ((dev)->features[0] & LMP_RSWITCH) #define lmp_encrypt_capable(dev) ((dev)->features[0] & LMP_ENCRYPT) +#define lmp_rswitch_capable(dev) ((dev)->features[0] & LMP_RSWITCH) +#define lmp_hold_capable(dev) ((dev)->features[0] & LMP_HOLD) #define lmp_sniff_capable(dev) ((dev)->features[0] & LMP_SNIFF) -#define lmp_sniffsubr_capable(dev) ((dev)->features[5] & LMP_SNIFF_SUBR) +#define lmp_park_capable(dev) ((dev)->features[1] & LMP_PARK) +#define lmp_inq_rssi_capable(dev) ((dev)->features[3] & LMP_RSSI_INQ) #define lmp_esco_capable(dev) ((dev)->features[3] & LMP_ESCO) +#define lmp_bredr_capable(dev) (!((dev)->features[4] & LMP_NO_BREDR)) +#define lmp_le_capable(dev) ((dev)->features[4] & LMP_LE) +#define lmp_sniffsubr_capable(dev) ((dev)->features[5] & LMP_SNIFF_SUBR) +#define lmp_pause_enc_capable(dev) ((dev)->features[5] & LMP_PAUSE_ENC) +#define lmp_ext_inq_capable(dev) ((dev)->features[6] & LMP_EXT_INQ) +#define lmp_le_br_capable(dev) ((dev)->features[6] & LMP_SIMUL_LE_BR) #define lmp_ssp_capable(dev) ((dev)->features[6] & LMP_SIMPLE_PAIR) #define lmp_no_flush_capable(dev) ((dev)->features[6] & LMP_NO_FLUSH) -#define lmp_le_capable(dev) ((dev)->features[4] & LMP_LE) -#define lmp_bredr_capable(dev) (!((dev)->features[4] & LMP_NO_BREDR)) +#define lmp_lsto_capable(dev) ((dev)->features[7] & LMP_LSTO) +#define lmp_inq_tx_pwr_capable(dev) ((dev)->features[7] & LMP_INQ_TX_PWR) +#define lmp_ext_feat_capable(dev) ((dev)->features[7] & LMP_EXTFEATURES) /* ----- Extended LMP capabilities ----- */ +#define lmp_host_ssp_capable(dev) ((dev)->host_features[0] & LMP_HOST_SSP) #define lmp_host_le_capable(dev) ((dev)->host_features[0] & LMP_HOST_LE) +#define lmp_host_le_br_capable(dev) ((dev)->host_features[0] & LMP_HOST_LE_BREDR) /* ----- HCI protocols ----- */ static inline int hci_proto_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, @@ -877,7 +895,7 @@ struct hci_cb { static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status) { - struct list_head *p; + struct hci_cb *cb; __u8 encrypt; hci_proto_auth_cfm(conn, status); @@ -888,8 +906,7 @@ static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status) encrypt = (conn->link_mode & HCI_LM_ENCRYPT) ? 0x01 : 0x00; read_lock(&hci_cb_list_lock); - list_for_each(p, &hci_cb_list) { - struct hci_cb *cb = list_entry(p, struct hci_cb, list); + list_for_each_entry(cb, &hci_cb_list, list) { if (cb->security_cfm) cb->security_cfm(conn, status, encrypt); } @@ -899,7 +916,7 @@ static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status) static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status, __u8 encrypt) { - struct list_head *p; + struct hci_cb *cb; if (conn->sec_level == BT_SECURITY_SDP) conn->sec_level = BT_SECURITY_LOW; @@ -910,8 +927,7 @@ static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status, hci_proto_encrypt_cfm(conn, status, encrypt); read_lock(&hci_cb_list_lock); - list_for_each(p, &hci_cb_list) { - struct hci_cb *cb = list_entry(p, struct hci_cb, list); + list_for_each_entry(cb, &hci_cb_list, list) { if (cb->security_cfm) cb->security_cfm(conn, status, encrypt); } @@ -920,11 +936,10 @@ static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status, static inline void hci_key_change_cfm(struct hci_conn *conn, __u8 status) { - struct list_head *p; + struct hci_cb *cb; read_lock(&hci_cb_list_lock); - list_for_each(p, &hci_cb_list) { - struct hci_cb *cb = list_entry(p, struct hci_cb, list); + list_for_each_entry(cb, &hci_cb_list, list) { if (cb->key_change_cfm) cb->key_change_cfm(conn, status); } @@ -934,11 +949,10 @@ static inline void hci_key_change_cfm(struct hci_conn *conn, __u8 status) static inline void hci_role_switch_cfm(struct hci_conn *conn, __u8 status, __u8 role) { - struct list_head *p; + struct hci_cb *cb; read_lock(&hci_cb_list_lock); - list_for_each(p, &hci_cb_list) { - struct hci_cb *cb = list_entry(p, struct hci_cb, list); + list_for_each_entry(cb, &hci_cb_list, list) { if (cb->role_switch_cfm) cb->role_switch_cfm(conn, status, role); } diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 6e23afdf65c1..f57fab04e7c5 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -52,6 +52,8 @@ #define L2CAP_ENC_TIMEOUT msecs_to_jiffies(5000) #define L2CAP_CONN_TIMEOUT msecs_to_jiffies(40000) #define L2CAP_INFO_TIMEOUT msecs_to_jiffies(4000) +#define L2CAP_MOVE_TIMEOUT msecs_to_jiffies(4000) +#define L2CAP_MOVE_ERTX_TIMEOUT msecs_to_jiffies(60000) #define L2CAP_A2MP_DEFAULT_MTU 670 @@ -434,6 +436,8 @@ struct l2cap_chan { struct sock *sk; struct l2cap_conn *conn; + struct hci_conn *hs_hcon; + struct hci_chan *hs_hchan; struct kref kref; __u8 state; @@ -477,6 +481,12 @@ struct l2cap_chan { unsigned long conn_state; unsigned long flags; + __u8 remote_amp_id; + __u8 local_amp_id; + __u8 move_id; + __u8 move_state; + __u8 move_role; + __u16 next_tx_seq; __u16 expected_ack_seq; __u16 expected_tx_seq; @@ -509,8 +519,6 @@ struct l2cap_chan { __u32 remote_acc_lat; __u32 remote_flush_to; - __u8 ctrl_id; - struct delayed_work chan_timer; struct delayed_work retrans_timer; struct delayed_work monitor_timer; @@ -644,6 +652,9 @@ enum { enum { L2CAP_RX_STATE_RECV, L2CAP_RX_STATE_SREJ_SENT, + L2CAP_RX_STATE_MOVE, + L2CAP_RX_STATE_WAIT_P, + L2CAP_RX_STATE_WAIT_F, }; enum { @@ -674,6 +685,25 @@ enum { L2CAP_EV_RECV_FRAME, }; +enum { + L2CAP_MOVE_ROLE_NONE, + L2CAP_MOVE_ROLE_INITIATOR, + L2CAP_MOVE_ROLE_RESPONDER, +}; + +enum { + L2CAP_MOVE_STABLE, + L2CAP_MOVE_WAIT_REQ, + L2CAP_MOVE_WAIT_RSP, + L2CAP_MOVE_WAIT_RSP_SUCCESS, + L2CAP_MOVE_WAIT_CONFIRM, + L2CAP_MOVE_WAIT_CONFIRM_RSP, + L2CAP_MOVE_WAIT_LOGICAL_COMP, + L2CAP_MOVE_WAIT_LOGICAL_CFM, + L2CAP_MOVE_WAIT_LOCAL_BUSY, + L2CAP_MOVE_WAIT_PREPARE, +}; + void l2cap_chan_hold(struct l2cap_chan *c); void l2cap_chan_put(struct l2cap_chan *c); @@ -778,5 +808,9 @@ void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan); void __l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan); void l2cap_chan_del(struct l2cap_chan *chan, int err); void l2cap_send_conn_req(struct l2cap_chan *chan); +void l2cap_move_start(struct l2cap_chan *chan); +void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan, + u8 status); +void __l2cap_physical_cfm(struct l2cap_chan *chan, int result); #endif /* __L2CAP_H */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c6964572890f..e78db2cf3d1b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -306,6 +306,88 @@ struct key_params { }; /** + * struct cfg80211_chan_def - channel definition + * @chan: the (control) channel + * @width: channel width + * @center_freq1: center frequency of first segment + * @center_freq2: center frequency of second segment + * (only with 80+80 MHz) + */ +struct cfg80211_chan_def { + struct ieee80211_channel *chan; + enum nl80211_chan_width width; + u32 center_freq1; + u32 center_freq2; +}; + +/** + * cfg80211_get_chandef_type - return old channel type from chandef + * @chandef: the channel definition + * + * Returns the old channel type (NOHT, HT20, HT40+/-) from a given + * chandef, which must have a bandwidth allowing this conversion. + */ +static inline enum nl80211_channel_type +cfg80211_get_chandef_type(const struct cfg80211_chan_def *chandef) +{ + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20_NOHT: + return NL80211_CHAN_NO_HT; + case NL80211_CHAN_WIDTH_20: + return NL80211_CHAN_HT20; + case NL80211_CHAN_WIDTH_40: + if (chandef->center_freq1 > chandef->chan->center_freq) + return NL80211_CHAN_HT40PLUS; + return NL80211_CHAN_HT40MINUS; + default: + WARN_ON(1); + return NL80211_CHAN_NO_HT; + } +} + +/** + * cfg80211_chandef_create - create channel definition using channel type + * @chandef: the channel definition struct to fill + * @channel: the control channel + * @chantype: the channel type + * + * Given a channel type, create a channel definition. + */ +void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, + struct ieee80211_channel *channel, + enum nl80211_channel_type chantype); + +/** + * cfg80211_chandef_identical - check if two channel definitions are identical + * @chandef1: first channel definition + * @chandef2: second channel definition + * + * Returns %true if the channels defined by the channel definitions are + * identical, %false otherwise. + */ +static inline bool +cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, + const struct cfg80211_chan_def *chandef2) +{ + return (chandef1->chan == chandef2->chan && + chandef1->width == chandef2->width && + chandef1->center_freq1 == chandef2->center_freq1 && + chandef1->center_freq2 == chandef2->center_freq2); +} + +/** + * cfg80211_chandef_compatible - check if two channel definitions are compatible + * @chandef1: first channel definition + * @chandef2: second channel definition + * + * Returns %NULL if the given channel definitions are incompatible, + * chandef1 or chandef2 otherwise. + */ +const struct cfg80211_chan_def * +cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, + const struct cfg80211_chan_def *chandef2); + +/** * enum survey_info_flags - survey information flags * * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in @@ -426,8 +508,7 @@ struct cfg80211_beacon_data { * * Used to configure an AP interface. * - * @channel: the channel to start the AP on - * @channel_type: the channel type to use + * @chandef: defines the channel to use * @beacon: beacon data * @beacon_interval: beacon interval * @dtim_period: DTIM period @@ -441,8 +522,7 @@ struct cfg80211_beacon_data { * @inactivity_timeout: time in seconds to determine station's inactivity. */ struct cfg80211_ap_settings { - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; struct cfg80211_beacon_data beacon; @@ -582,16 +662,24 @@ enum station_info_flags { * Used by the driver to indicate the specific rate transmission * type for 802.11n transmissions. * - * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled - * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission + * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS + * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS + * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 MHz width transmission + * @RATE_INFO_FLAGS_80_MHZ_WIDTH: 80 MHz width transmission + * @RATE_INFO_FLAGS_80P80_MHZ_WIDTH: 80+80 MHz width transmission + * @RATE_INFO_FLAGS_160_MHZ_WIDTH: 160 MHz width transmission * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval - * @RATE_INFO_FLAGS_60G: 60gHz MCS + * @RATE_INFO_FLAGS_60G: 60GHz MCS */ enum rate_info_flags { - RATE_INFO_FLAGS_MCS = 1<<0, - RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1, - RATE_INFO_FLAGS_SHORT_GI = 1<<2, - RATE_INFO_FLAGS_60G = 1<<3, + RATE_INFO_FLAGS_MCS = BIT(0), + RATE_INFO_FLAGS_VHT_MCS = BIT(1), + RATE_INFO_FLAGS_40_MHZ_WIDTH = BIT(2), + RATE_INFO_FLAGS_80_MHZ_WIDTH = BIT(3), + RATE_INFO_FLAGS_80P80_MHZ_WIDTH = BIT(4), + RATE_INFO_FLAGS_160_MHZ_WIDTH = BIT(5), + RATE_INFO_FLAGS_SHORT_GI = BIT(6), + RATE_INFO_FLAGS_60G = BIT(7), }; /** @@ -602,11 +690,13 @@ enum rate_info_flags { * @flags: bitflag of flags from &enum rate_info_flags * @mcs: mcs index if struct describes a 802.11n bitrate * @legacy: bitrate in 100kbit/s for 802.11abg + * @nss: number of streams (VHT only) */ struct rate_info { u8 flags; u8 mcs; u16 legacy; + u8 nss; }; /** @@ -909,8 +999,7 @@ struct mesh_config { /** * struct mesh_setup - 802.11s mesh setup configuration - * @channel: the channel to start the mesh network on - * @channel_type: the channel type to use + * @chandef: defines the channel to use * @mesh_id: the mesh ID * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes * @sync_method: which synchronization method to use @@ -925,8 +1014,7 @@ struct mesh_config { * These parameters are fixed when the mesh is created. */ struct mesh_setup { - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; const u8 *mesh_id; u8 mesh_id_len; u8 sync_method; @@ -1266,8 +1354,7 @@ struct cfg80211_disassoc_request { * @ssid_len: The length of the SSID, will always be non-zero. * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not * search for IBSSs with a different BSSID. - * @channel: The channel to use if no IBSS can be found to join. - * @channel_type: channel type (HT mode) + * @chandef: defines the channel to use if no other IBSS to join can be found * @channel_fixed: The channel should be fixed -- do not search for * IBSSs to join on other channels. * @ie: information element(s) to include in the beacon @@ -1285,8 +1372,7 @@ struct cfg80211_disassoc_request { struct cfg80211_ibss_params { u8 *ssid; u8 *bssid; - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; u8 *ie; u8 ssid_len, ie_len; u16 beacon_interval; @@ -1545,13 +1631,19 @@ struct cfg80211_gtk_rekey_data { * to a merge. * @leave_ibss: Leave the IBSS. * + * @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or + * MESH mode) + * * @set_wiphy_params: Notify that wiphy parameters have changed; * @changed bitfield (see &enum wiphy_params_flags) describes which values * have changed. The actual parameter values are available in * struct wiphy. If returning an error, no value should be changed. * * @set_tx_power: set the transmit power according to the parameters, - * the power passed is in mBm, to get dBm use MBM_TO_DBM(). + * the power passed is in mBm, to get dBm use MBM_TO_DBM(). The + * wdev may be %NULL if power was set for the wiphy, and will + * always be %NULL unless the driver supports per-vif TX power + * (as advertised by the nl80211 feature flag.) * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful * @@ -1722,8 +1814,7 @@ struct cfg80211_ops { struct ieee80211_channel *chan); int (*set_monitor_channel)(struct wiphy *wiphy, - struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type); + struct cfg80211_chan_def *chandef); int (*scan)(struct wiphy *wiphy, struct cfg80211_scan_request *request); @@ -1746,11 +1837,15 @@ struct cfg80211_ops { struct cfg80211_ibss_params *params); int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); + int (*set_mcast_rate)(struct wiphy *wiphy, struct net_device *dev, + int rate[IEEE80211_NUM_BANDS]); + int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); - int (*set_tx_power)(struct wiphy *wiphy, + int (*set_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_tx_power_setting type, int mbm); - int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, + int *dbm); int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, const u8 *addr); @@ -1781,7 +1876,6 @@ struct cfg80211_ops { int (*remain_on_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type, unsigned int duration, u64 *cookie); int (*cancel_remain_on_channel)(struct wiphy *wiphy, @@ -1790,10 +1884,8 @@ struct cfg80211_ops { int (*mgmt_tx)(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, bool offchan, - enum nl80211_channel_type channel_type, - bool channel_type_valid, unsigned int wait, - const u8 *buf, size_t len, bool no_cck, - bool dont_wait_for_ack, u64 *cookie); + unsigned int wait, const u8 *buf, size_t len, + bool no_cck, bool dont_wait_for_ack, u64 *cookie); int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy, struct wireless_dev *wdev, u64 cookie); @@ -1848,10 +1940,9 @@ struct cfg80211_ops { void (*get_et_strings)(struct wiphy *wiphy, struct net_device *dev, u32 sset, u8 *data); - struct ieee80211_channel * - (*get_channel)(struct wiphy *wiphy, + int (*get_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, - enum nl80211_channel_type *type); + struct cfg80211_chan_def *chandef); int (*start_p2p_device)(struct wiphy *wiphy, struct wireless_dev *wdev); @@ -2459,8 +2550,7 @@ struct wireless_dev { spinlock_t event_lock; struct cfg80211_internal_bss *current_bss; /* associated / joined */ - struct ieee80211_channel *preset_chan; - enum nl80211_channel_type preset_chantype; + struct cfg80211_chan_def preset_chandef; /* for AP and mesh channel tracking */ struct ieee80211_channel *channel; @@ -3340,14 +3430,12 @@ void cfg80211_disconnected(struct net_device *dev, u16 reason, * @wdev: wireless device * @cookie: the request cookie * @chan: The current channel (from remain_on_channel request) - * @channel_type: Channel type * @duration: Duration in milliseconds that the driver intents to remain on the * channel * @gfp: allocation flags */ void cfg80211_ready_on_channel(struct wireless_dev *wdev, u64 cookie, struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type, unsigned int duration, gfp_t gfp); /** @@ -3355,12 +3443,10 @@ void cfg80211_ready_on_channel(struct wireless_dev *wdev, u64 cookie, * @wdev: wireless device * @cookie: the request cookie * @chan: The current channel (from remain_on_channel request) - * @channel_type: Channel type * @gfp: allocation flags */ void cfg80211_remain_on_channel_expired(struct wireless_dev *wdev, u64 cookie, struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type, gfp_t gfp); @@ -3550,7 +3636,6 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, * @len: length of the frame * @freq: frequency the frame was received on * @sig_dbm: signal strength in mBm, or 0 if unknown - * @gfp: allocation flags * * Use this function to report to userspace when a beacon was * received. It is not useful to call this when there is no @@ -3558,31 +3643,47 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, */ void cfg80211_report_obss_beacon(struct wiphy *wiphy, const u8 *frame, size_t len, - int freq, int sig_dbm, gfp_t gfp); + int freq, int sig_dbm); /** - * cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used + * cfg80211_reg_can_beacon - check if beaconing is allowed * @wiphy: the wiphy - * @chan: main channel - * @channel_type: HT mode + * @chandef: the channel definition * * This function returns true if there is no secondary channel or the secondary - * channel can be used for beaconing (i.e. is not a radar channel etc.) + * channel(s) can be used for beaconing (i.e. is not a radar channel etc.) */ -bool cfg80211_can_beacon_sec_chan(struct wiphy *wiphy, - struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type); +bool cfg80211_reg_can_beacon(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef); /* * cfg80211_ch_switch_notify - update wdev channel and notify userspace * @dev: the device which switched channels - * @freq: new channel frequency (in MHz) - * @type: channel type + * @chandef: the new channel definition * * Acquires wdev_lock, so must only be called from sleepable driver context! */ -void cfg80211_ch_switch_notify(struct net_device *dev, int freq, - enum nl80211_channel_type type); +void cfg80211_ch_switch_notify(struct net_device *dev, + struct cfg80211_chan_def *chandef); + +/* + * cfg80211_tdls_oper_request - request userspace to perform TDLS operation + * @dev: the device on which the operation is requested + * @peer: the MAC address of the peer device + * @oper: the requested TDLS operation (NL80211_TDLS_SETUP or + * NL80211_TDLS_TEARDOWN) + * @reason_code: the reason code for teardown request + * @gfp: allocation flags + * + * This function is used to request userspace to perform TDLS operation that + * requires knowledge of keys, i.e., link setup or teardown when the AP + * connection uses encryption. This is optional mechanism for the driver to use + * if it can automatically determine when a TDLS link could be useful (e.g., + * based on traffic and signal strength for a peer). + */ +void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer, + enum nl80211_tdls_operation oper, + u16 reason_code, gfp_t gfp); /* * cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units) @@ -3608,6 +3709,26 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate); */ void cfg80211_unregister_wdev(struct wireless_dev *wdev); +/** + * cfg80211_get_p2p_attr - find and copy a P2P attribute from IE buffer + * @ies: the input IE buffer + * @len: the input length + * @attr: the attribute ID to find + * @buf: output buffer, can be %NULL if the data isn't needed, e.g. + * if the function is only called to get the needed buffer size + * @bufsize: size of the output buffer + * + * The function finds a given P2P attribute in the (vendor) IEs and + * copies its contents to the given buffer. + * + * The return value is a negative error code (-%EILSEQ or -%ENOENT) if + * the data is malformed or the attribute can't be found (respectively), + * or the length of the found attribute (which can be zero). + */ +int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, + enum ieee80211_p2p_attr_id attr, + u8 *buf, unsigned int bufsize); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 00b7204708bd..db7680acd0da 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -145,11 +145,11 @@ struct ieee80211_low_level_stats { /** * enum ieee80211_chanctx_change - change flag for channel context - * @IEEE80211_CHANCTX_CHANGE_CHANNEL_TYPE: The channel type was changed + * @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed * @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed */ enum ieee80211_chanctx_change { - IEEE80211_CHANCTX_CHANGE_CHANNEL_TYPE = BIT(0), + IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0), IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1), }; @@ -159,8 +159,7 @@ enum ieee80211_chanctx_change { * This is the driver-visible part. The ieee80211_chanctx * that contains it is visible in mac80211 only. * - * @channel: the channel to tune to - * @channel_type: the channel (HT) type + * @def: the channel definition * @rx_chains_static: The number of RX chains that must always be * active on the channel to receive MIMO transmissions * @rx_chains_dynamic: The number of RX chains that must be enabled @@ -170,8 +169,7 @@ enum ieee80211_chanctx_change { * sizeof(void *), size is determined in hw information. */ struct ieee80211_chanctx_conf { - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def def; u8 rx_chains_static, rx_chains_dynamic; @@ -207,6 +205,9 @@ struct ieee80211_chanctx_conf { * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode) * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode) * @BSS_CHANGED_PS: PS changed for this BSS (STA mode) + * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface + * @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS) + * changed (currently only in P2P client mode, GO mode will be later) */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -227,6 +228,8 @@ enum ieee80211_bss_change { BSS_CHANGED_SSID = 1<<15, BSS_CHANGED_AP_PROBE_RESP = 1<<16, BSS_CHANGED_PS = 1<<17, + BSS_CHANGED_TXPOWER = 1<<18, + BSS_CHANGED_P2P_PS = 1<<19, /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -283,9 +286,8 @@ enum ieee80211_rssi_event { * @mcast_rate: per-band multicast rate index + 1 (0: disabled) * @bssid: The BSSID for this BSS * @enable_beacon: whether beaconing should be enabled or not - * @channel_type: Channel type for this BSS -- the hardware might be - * configured for HT40+ while this BSS only uses no-HT, for - * example. + * @chandef: Channel definition for this BSS -- the hardware might be + * configured a higher bandwidth than this BSS uses, for example. * @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation. * This field is only valid when the channel type is one of the HT types. * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value @@ -309,6 +311,9 @@ enum ieee80211_rssi_event { * @ssid: The SSID of the current vif. Only valid in AP-mode. * @ssid_len: Length of SSID given in @ssid. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. + * @txpower: TX power in dBm + * @p2p_ctwindow: P2P CTWindow, only for P2P client interfaces + * @p2p_oppps: P2P opportunistic PS is enabled */ struct ieee80211_bss_conf { const u8 *bssid; @@ -331,7 +336,7 @@ struct ieee80211_bss_conf { u16 ht_operation_mode; s32 cqm_rssi_thold; u32 cqm_rssi_hyst; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN]; u8 arp_addr_cnt; bool arp_filter_enabled; @@ -341,6 +346,9 @@ struct ieee80211_bss_conf { u8 ssid[IEEE80211_MAX_SSID_LEN]; size_t ssid_len; bool hidden_ssid; + int txpower; + u8 p2p_ctwindow; + bool p2p_oppps; }; /** @@ -491,9 +499,14 @@ enum mac80211_tx_control_flags { * This is set if the current BSS requires ERP protection. * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble. * @IEEE80211_TX_RC_MCS: HT rate. + * @IEEE80211_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is split + * into a higher 4 bits (Nss) and lower 4 bits (MCS number) * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in * Greenfield mode. * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz. + * @IEEE80211_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission + * @IEEE80211_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission + * (80+80 isn't supported yet) * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the * adjacent 20 MHz channels, if the current channel type is * NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS. @@ -504,12 +517,15 @@ enum mac80211_rate_control_flags { IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1), IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2), - /* rate index is an MCS rate number instead of an index */ + /* rate index is an HT/VHT MCS instead of an index */ IEEE80211_TX_RC_MCS = BIT(3), IEEE80211_TX_RC_GREEN_FIELD = BIT(4), IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5), IEEE80211_TX_RC_DUP_DATA = BIT(6), IEEE80211_TX_RC_SHORT_GI = BIT(7), + IEEE80211_TX_RC_VHT_MCS = BIT(8), + IEEE80211_TX_RC_80_MHZ_WIDTH = BIT(9), + IEEE80211_TX_RC_160_MHZ_WIDTH = BIT(10), }; @@ -552,10 +568,32 @@ enum mac80211_rate_control_flags { */ struct ieee80211_tx_rate { s8 idx; - u8 count; - u8 flags; + u16 count:5, + flags:11; } __packed; +#define IEEE80211_MAX_TX_RETRY 31 + +static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate *rate, + u8 mcs, u8 nss) +{ + WARN_ON(mcs & ~0xF); + WARN_ON(nss & ~0x7); + rate->idx = (nss << 4) | mcs; +} + +static inline u8 +ieee80211_rate_get_vht_mcs(const struct ieee80211_tx_rate *rate) +{ + return rate->idx & 0xF; +} + +static inline u8 +ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate) +{ + return rate->idx >> 4; +} + /** * struct ieee80211_tx_info - skb transmit information * @@ -700,13 +738,20 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * the frame. * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on * the frame. - * @RX_FLAG_MACTIME_MPDU: The timestamp passed in the RX status (@mactime + * @RX_FLAG_MACTIME_START: The timestamp passed in the RX status (@mactime * field) is valid and contains the time the first symbol of the MPDU * was received. This is useful in monitor mode and for proper IBSS * merging. + * @RX_FLAG_MACTIME_END: The timestamp passed in the RX status (@mactime + * field) is valid and contains the time the last symbol of the MPDU + * (including FCS) was received. * @RX_FLAG_SHORTPRE: Short preamble was used for this frame * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index + * @RX_FLAG_VHT: VHT MCS was used and rate_index is MCS index * @RX_FLAG_40MHZ: HT40 (40 MHz) was used + * @RX_FLAG_80MHZ: 80 MHz was used + * @RX_FLAG_80P80MHZ: 80+80 MHz was used + * @RX_FLAG_160MHZ: 160 MHz was used * @RX_FLAG_SHORT_GI: Short guard interval was used * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present. * Valid only for data frames (mainly A-MPDU) @@ -734,7 +779,7 @@ enum mac80211_rx_flags { RX_FLAG_IV_STRIPPED = BIT(4), RX_FLAG_FAILED_FCS_CRC = BIT(5), RX_FLAG_FAILED_PLCP_CRC = BIT(6), - RX_FLAG_MACTIME_MPDU = BIT(7), + RX_FLAG_MACTIME_START = BIT(7), RX_FLAG_SHORTPRE = BIT(8), RX_FLAG_HT = BIT(9), RX_FLAG_40MHZ = BIT(10), @@ -748,6 +793,11 @@ enum mac80211_rx_flags { RX_FLAG_AMPDU_IS_LAST = BIT(18), RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(19), RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(20), + RX_FLAG_MACTIME_END = BIT(21), + RX_FLAG_VHT = BIT(22), + RX_FLAG_80MHZ = BIT(23), + RX_FLAG_80P80MHZ = BIT(24), + RX_FLAG_160MHZ = BIT(25), }; /** @@ -768,25 +818,39 @@ enum mac80211_rx_flags { * @IEEE80211_HW_SIGNAL_* * @antenna: antenna used * @rate_idx: index of data rate into band's supported rates or MCS index if - * HT rates are use (RX_FLAG_HT) + * HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT) + * @vht_nss: number of streams (VHT only) * @flag: %RX_FLAG_* * @rx_flags: internal RX flags for mac80211 * @ampdu_reference: A-MPDU reference number, must be a different value for * each A-MPDU but the same for each subframe within one A-MPDU * @ampdu_delimiter_crc: A-MPDU delimiter CRC + * @vendor_radiotap_bitmap: radiotap vendor namespace presence bitmap + * @vendor_radiotap_len: radiotap vendor namespace length + * @vendor_radiotap_align: radiotap vendor namespace alignment. Note + * that the actual data must be at the start of the SKB data + * already. + * @vendor_radiotap_oui: radiotap vendor namespace OUI + * @vendor_radiotap_subns: radiotap vendor sub namespace */ struct ieee80211_rx_status { u64 mactime; u32 device_timestamp; u32 ampdu_reference; u32 flag; + u32 vendor_radiotap_bitmap; + u16 vendor_radiotap_len; u16 freq; u8 rate_idx; + u8 vht_nss; u8 rx_flags; u8 band; u8 antenna; s8 signal; u8 ampdu_delimiter_crc; + u8 vendor_radiotap_align; + u8 vendor_radiotap_oui[3]; + u8 vendor_radiotap_subns; }; /** @@ -884,7 +948,8 @@ enum ieee80211_smps_mode { * powersave documentation below. This variable is valid only when * the CONF_PS flag is set. * - * @power_level: requested transmit power (in dBm) + * @power_level: requested transmit power (in dBm), backward compatibility + * value only that is set to the minimum of all interfaces * * @channel: the channel to tune to * @channel_type: the channel (HT) type @@ -2180,6 +2245,14 @@ enum ieee80211_rate_control_changed { * @sta_remove: Notifies low level driver about removal of an associated * station, AP, IBSS/WDS/mesh peer etc. This callback can sleep. * + * @sta_add_debugfs: Drivers can use this callback to add debugfs files + * when a station is added to mac80211's station list. This callback + * and @sta_remove_debugfs should be within a CONFIG_MAC80211_DEBUGFS + * conditional. This callback can sleep. + * + * @sta_remove_debugfs: Remove the debugfs files which were added using + * @sta_add_debugfs. This callback can sleep. + * * @sta_notify: Notifies low level driver about power state transition of an * associated station, AP, IBSS/WDS/mesh peer etc. For a VIF operating * in AP mode, this callback will not be called when the flag @@ -2381,6 +2454,17 @@ enum ieee80211_rate_control_changed { * to vif. Possible use is for hw queue remapping. * @unassign_vif_chanctx: Notifies device driver about channel context being * unbound from vif. + * @start_ap: Start operation on the AP interface, this is called after all the + * information in bss_conf is set and beacon can be retrieved. A channel + * context is bound before this is called. Note that if the driver uses + * software scan or ROC, this (and @stop_ap) isn't called when the AP is + * just "paused" for scanning/ROC, which is indicated by the beacon being + * disabled/enabled via @bss_info_changed. + * @stop_ap: Stop operation on the AP interface. + * + * @restart_complete: Called after a call to ieee80211_restart_hw(), when the + * reconfiguration has completed. This can help the driver implement the + * reconfiguration step. This callback may sleep. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2406,6 +2490,9 @@ struct ieee80211_ops { struct ieee80211_bss_conf *info, u32 changed); + int (*start_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + void (*stop_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + u64 (*prepare_multicast)(struct ieee80211_hw *hw, struct netdev_hw_addr_list *mc_list); void (*configure_filter)(struct ieee80211_hw *hw, @@ -2447,6 +2534,16 @@ struct ieee80211_ops { struct ieee80211_sta *sta); int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta); +#ifdef CONFIG_MAC80211_DEBUGFS + void (*sta_add_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct dentry *dir); + void (*sta_remove_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct dentry *dir); +#endif void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -2488,8 +2585,8 @@ struct ieee80211_ops { int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant); int (*remain_on_channel)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type, int duration); int (*cancel_remain_on_channel)(struct ieee80211_hw *hw); int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx); @@ -2539,6 +2636,8 @@ struct ieee80211_ops { void (*unassign_vif_chanctx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_chanctx_conf *ctx); + + void (*restart_complete)(struct ieee80211_hw *hw); }; /** @@ -3385,6 +3484,21 @@ void ieee80211_sched_scan_results(struct ieee80211_hw *hw); void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw); /** + * enum ieee80211_interface_iteration_flags - interface iteration flags + * @IEEE80211_IFACE_ITER_NORMAL: Iterate over all interfaces that have + * been added to the driver; However, note that during hardware + * reconfiguration (after restart_hw) it will iterate over a new + * interface and over all the existing interfaces even if they + * haven't been re-added to the driver yet. + * @IEEE80211_IFACE_ITER_RESUME_ALL: During resume, iterate over all + * interfaces, even if they haven't been re-added to the driver yet. + */ +enum ieee80211_interface_iteration_flags { + IEEE80211_IFACE_ITER_NORMAL = 0, + IEEE80211_IFACE_ITER_RESUME_ALL = BIT(0), +}; + +/** * ieee80211_iterate_active_interfaces - iterate active interfaces * * This function iterates over the interfaces associated with a given @@ -3392,13 +3506,15 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw); * This function allows the iterator function to sleep, when the iterator * function is atomic @ieee80211_iterate_active_interfaces_atomic can * be used. - * Does not iterate over a new interface during add_interface() + * Does not iterate over a new interface during add_interface(). * * @hw: the hardware struct of which the interfaces should be iterated over + * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags * @iterator: the iterator function to call * @data: first argument of the iterator function */ void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, + u32 iter_flags, void (*iterator)(void *data, u8 *mac, struct ieee80211_vif *vif), void *data); @@ -3410,13 +3526,15 @@ void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, * hardware that are currently active and calls the callback for them. * This function requires the iterator callback function to be atomic, * if that is not desired, use @ieee80211_iterate_active_interfaces instead. - * Does not iterate over a new interface during add_interface() + * Does not iterate over a new interface during add_interface(). * * @hw: the hardware struct of which the interfaces should be iterated over + * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags * @iterator: the iterator function to call, cannot sleep * @data: first argument of the iterator function */ void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw, + u32 iter_flags, void (*iterator)(void *data, u8 *mac, struct ieee80211_vif *vif), diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 639f50af42df..671953e11575 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -149,6 +149,8 @@ void *nfc_hci_get_clientdata(struct nfc_hci_dev *hdev); void nfc_hci_driver_failure(struct nfc_hci_dev *hdev, int err); +int nfc_hci_result_to_errno(u8 result); + /* Host IDs */ #define NFC_HCI_HOST_CONTROLLER_ID 0x00 #define NFC_HCI_TERMINAL_HOST_ID 0x01 @@ -235,5 +237,6 @@ int nfc_hci_send_response(struct nfc_hci_dev *hdev, u8 gate, u8 response, int nfc_hci_send_event(struct nfc_hci_dev *hdev, u8 gate, u8 event, const u8 *param, size_t param_len); int nfc_hci_target_discovered(struct nfc_hci_dev *hdev, u8 gate); +u32 nfc_hci_sak_to_protocol(u8 sak); #endif /* __NET_HCI_H */ |