diff options
Diffstat (limited to 'include/net')
| -rw-r--r-- | include/net/mac80211.h | 108 |
1 files changed, 53 insertions, 55 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b1ac872dc88a..53b3853d6fd1 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1045,16 +1045,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * (including FCS) was received. * @RX_FLAG_MACTIME_PLCP_START: The timestamp passed in the RX status (@mactime * field) is valid and contains the time the SYNC preamble was received. - * @RX_FLAG_SHORTPRE: Short preamble was used for this frame - * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index - * @RX_FLAG_VHT: VHT MCS was used and rate_index is MCS index - * @RX_FLAG_40MHZ: HT40 (40 MHz) was used - * @RX_FLAG_SHORT_GI: Short guard interval was used * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present. * Valid only for data frames (mainly A-MPDU) - * @RX_FLAG_HT_GF: This frame was received in a HT-greenfield transmission, if - * the driver fills this value it should add %IEEE80211_RADIOTAP_MCS_HAVE_FMT - * to hw.radiotap_mcs_details to advertise that fact * @RX_FLAG_AMPDU_DETAILS: A-MPDU details are known, in particular the reference * number (@ampdu_reference) must be populated and be a distinct number for * each A-MPDU @@ -1067,7 +1059,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * is stored in the @ampdu_delimiter_crc field) * @RX_FLAG_MIC_STRIPPED: The mic was stripped of this packet. Decryption was * done by the hardware - * @RX_FLAG_LDPC: LDPC was used * @RX_FLAG_ONLY_MONITOR: Report frame only to monitor interfaces without * processing it in any regular way. * This is useful if drivers offload some frames but still want to report @@ -1076,9 +1067,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * monitor interfaces. * This is useful if drivers offload some frames but still want to report * them for sniffing purposes. - * @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3 - * @RX_FLAG_10MHZ: 10 MHz (half channel) was used - * @RX_FLAG_5MHZ: 5 MHz (quarter channel) was used * @RX_FLAG_AMSDU_MORE: Some drivers may prefer to report separate A-MSDU * subframes instead of a one huge frame for performance reasons. * All, but the last MSDU from an A-MSDU should have this flag set. E.g. @@ -1106,52 +1094,62 @@ enum mac80211_rx_flags { RX_FLAG_FAILED_FCS_CRC = BIT(5), RX_FLAG_FAILED_PLCP_CRC = BIT(6), RX_FLAG_MACTIME_START = BIT(7), - RX_FLAG_SHORTPRE = BIT(8), - RX_FLAG_HT = BIT(9), - RX_FLAG_40MHZ = BIT(10), - RX_FLAG_SHORT_GI = BIT(11), - RX_FLAG_NO_SIGNAL_VAL = BIT(12), - RX_FLAG_HT_GF = BIT(13), - RX_FLAG_AMPDU_DETAILS = BIT(14), - RX_FLAG_PN_VALIDATED = BIT(15), - RX_FLAG_DUP_VALIDATED = BIT(16), - RX_FLAG_AMPDU_LAST_KNOWN = BIT(17), - RX_FLAG_AMPDU_IS_LAST = BIT(18), - RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(19), - RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(20), - RX_FLAG_MACTIME_END = BIT(21), - RX_FLAG_VHT = BIT(22), - RX_FLAG_LDPC = BIT(23), - RX_FLAG_ONLY_MONITOR = BIT(24), - RX_FLAG_SKIP_MONITOR = BIT(25), - RX_FLAG_STBC_MASK = BIT(26) | BIT(27), - RX_FLAG_10MHZ = BIT(28), - RX_FLAG_5MHZ = BIT(29), - RX_FLAG_AMSDU_MORE = BIT(30), - RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(31), - RX_FLAG_MIC_STRIPPED = BIT_ULL(32), - RX_FLAG_ALLOW_SAME_PN = BIT_ULL(33), - RX_FLAG_ICV_STRIPPED = BIT_ULL(34), + RX_FLAG_NO_SIGNAL_VAL = BIT(8), + RX_FLAG_AMPDU_DETAILS = BIT(9), + RX_FLAG_PN_VALIDATED = BIT(10), + RX_FLAG_DUP_VALIDATED = BIT(11), + RX_FLAG_AMPDU_LAST_KNOWN = BIT(12), + RX_FLAG_AMPDU_IS_LAST = BIT(13), + RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(14), + RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(15), + RX_FLAG_MACTIME_END = BIT(16), + RX_FLAG_ONLY_MONITOR = BIT(17), + RX_FLAG_SKIP_MONITOR = BIT(18), + RX_FLAG_AMSDU_MORE = BIT(19), + RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(20), + RX_FLAG_MIC_STRIPPED = BIT(21), + RX_FLAG_ALLOW_SAME_PN = BIT(22), + RX_FLAG_ICV_STRIPPED = BIT(23), }; -#define RX_FLAG_STBC_SHIFT 26 - /** - * enum mac80211_rx_vht_flags - receive VHT flags + * enum mac80211_rx_encoding_flags - MCS & bandwidth flags * - * These flags are used with the @vht_flag member of - * &struct ieee80211_rx_status. - * @RX_VHT_FLAG_80MHZ: 80 MHz was used - * @RX_VHT_FLAG_160MHZ: 160 MHz was used - * @RX_VHT_FLAG_BF: packet was beamformed - */ - -enum mac80211_rx_vht_flags { - RX_VHT_FLAG_80MHZ = BIT(0), - RX_VHT_FLAG_160MHZ = BIT(1), - RX_VHT_FLAG_BF = BIT(2), + * @RX_ENC_FLAG_SHORTPRE: Short preamble was used for this frame + * @RX_ENC_FLAG_HT: HT MCS was used and rate_idx is MCS index + * @RX_ENC_FLAG_VHT: VHT MCS was used and rate_index is MCS index + * @RX_ENC_FLAG_40MHZ: HT40 (40 MHz) was used + * @RX_ENC_FLAG_SHORT_GI: Short guard interval was used + * @RX_ENC_FLAG_HT_GF: This frame was received in a HT-greenfield transmission, + * if the driver fills this value it should add + * %IEEE80211_RADIOTAP_MCS_HAVE_FMT + * to hw.radiotap_mcs_details to advertise that fact + * @RX_ENC_FLAG_LDPC: LDPC was used + * @RX_ENC_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3 + * @RX_ENC_FLAG_10MHZ: 10 MHz (half channel) was used + * @RX_ENC_FLAG_5MHZ: 5 MHz (quarter channel) was used + * @RX_ENC_FLAG_80MHZ: 80 MHz was used + * @RX_ENC_FLAG_160MHZ: 160 MHz was used + * @RX_ENC_FLAG_BF: packet was beamformed + */ +enum mac80211_rx_encoding_flags { + RX_ENC_FLAG_SHORTPRE = BIT(0), + RX_ENC_FLAG_HT = BIT(1), + RX_ENC_FLAG_40MHZ = BIT(2), + RX_ENC_FLAG_SHORT_GI = BIT(3), + RX_ENC_FLAG_HT_GF = BIT(4), + RX_ENC_FLAG_VHT = BIT(5), + RX_ENC_FLAG_STBC_MASK = BIT(6) | BIT(7), + RX_ENC_FLAG_LDPC = BIT(8), + RX_ENC_FLAG_10MHZ = BIT(9), + RX_ENC_FLAG_5MHZ = BIT(10), + RX_ENC_FLAG_80MHZ = BIT(11), + RX_ENC_FLAG_160MHZ = BIT(12), + RX_ENC_FLAG_BF = BIT(13), }; +#define RX_ENC_FLAG_STBC_SHIFT 6 + /** * struct ieee80211_rx_status - receive status * @@ -1181,7 +1179,7 @@ enum mac80211_rx_vht_flags { * HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT) * @vht_nss: number of streams (VHT only) * @flag: %RX_FLAG_\* - * @vht_flag: %RX_VHT_FLAG_\* + * @enc_flags: uses bits from &enum mac80211_rx_encoding_flags * @rx_flags: internal RX flags for mac80211 * @ampdu_reference: A-MPDU reference number, must be a different value for * each A-MPDU but the same for each subframe within one A-MPDU @@ -1192,9 +1190,9 @@ struct ieee80211_rx_status { u64 boottime_ns; u32 device_timestamp; u32 ampdu_reference; - u64 flag; + u32 flag; + u16 enc_flags; u16 freq; - u8 vht_flag; u8 rate_idx; u8 vht_nss; u8 rx_flags; |