diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 90 |
1 files changed, 65 insertions, 25 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 382ebb862ea8..75880fc70700 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1201,9 +1201,9 @@ static inline struct ieee80211_rx_status *IEEE80211_SKB_RXCB(struct sk_buff *skb * in the TX status but the rate control information (it does clear * the count since you need to fill that in anyway). * - * NOTE: You can only use this function if you do NOT use - * info->driver_data! Use info->rate_driver_data - * instead if you need only the less space that allows. + * NOTE: While the rates array is kept intact, this will wipe all of the + * driver_data fields in info, so it's up to the driver to restore + * any fields it needs after calling this helper. */ static inline void ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) @@ -2056,6 +2056,45 @@ struct ieee80211_sta_txpwr { enum nl80211_tx_power_setting type; }; +#define MAX_STA_LINKS 15 + +/** + * struct ieee80211_link_sta - station Link specific info + * All link specific info for a STA link for a non MLD STA(single) + * or a MLD STA(multiple entries) are stored here. + * + * @addr: MAC address of the Link STA. For non-MLO STA this is same as the addr + * in ieee80211_sta. For MLO Link STA this addr can be same or different + * from addr in ieee80211_sta (representing MLD STA addr) + * @supp_rates: Bitmap of supported rates + * @ht_cap: HT capabilities of this STA; restricted to our own capabilities + * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities + * @he_cap: HE capabilities of this STA + * @he_6ghz_capa: on 6 GHz, holds the HE 6 GHz band capabilities + * @eht_cap: EHT capabilities of this STA + * @bandwidth: current bandwidth the station can receive with + * @rx_nss: in HT/VHT, the maximum number of spatial streams the + * station can receive at the moment, changed by operating mode + * notifications and capabilities. The value is only valid after + * the station moves to associated state. + * @txpwr: the station tx power configuration + * + */ +struct ieee80211_link_sta { + u8 addr[ETH_ALEN]; + + u32 supp_rates[NUM_NL80211_BANDS]; + struct ieee80211_sta_ht_cap ht_cap; + struct ieee80211_sta_vht_cap vht_cap; + struct ieee80211_sta_he_cap he_cap; + struct ieee80211_he_6ghz_capa he_6ghz_capa; + struct ieee80211_sta_eht_cap eht_cap; + + u8 rx_nss; + enum ieee80211_sta_rx_bandwidth bandwidth; + struct ieee80211_sta_txpwr txpwr; +}; + /** * struct ieee80211_sta - station table entry * @@ -2065,15 +2104,11 @@ struct ieee80211_sta_txpwr { * either be protected by rcu_read_lock() explicitly or implicitly, * or you must take good care to not use such a pointer after a * call to your sta_remove callback that removed it. + * This also represents the MLD STA in case of MLO association + * and holds pointers to various link STA's * * @addr: MAC address * @aid: AID we assigned to the station if we're an AP - * @supp_rates: Bitmap of supported rates (per band) - * @ht_cap: HT capabilities of this STA; restricted to our own capabilities - * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities - * @he_cap: HE capabilities of this STA - * @he_6ghz_capa: on 6 GHz, holds the HE 6 GHz band capabilities - * @eht_cap: EHT capabilities of this STA * @max_rx_aggregation_subframes: maximal amount of frames in a single AMPDU * that this station is allowed to transmit to us. * Can be modified by driver. @@ -2085,11 +2120,6 @@ struct ieee80211_sta_txpwr { * if wme is supported. The bits order is like in * IEEE80211_WMM_IE_STA_QOSINFO_AC_*. * @max_sp: max Service Period. Only valid if wme is supported. - * @bandwidth: current bandwidth the station can receive with - * @rx_nss: in HT/VHT, the maximum number of spatial streams the - * station can receive at the moment, changed by operating mode - * notifications and capabilities. The value is only valid after - * the station moves to associated state. * @smps_mode: current SMPS mode (off, static or dynamic) * @rates: rate control selection table * @tdls: indicates whether the STA is a TDLS peer @@ -2102,25 +2132,28 @@ struct ieee80211_sta_txpwr { * @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not. * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control. * @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID - * @txpwr: the station tx power configuration * @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that * the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames + * @multi_link_sta: Identifies if this sta is a MLD STA + * @deflink: This holds the default link STA information, for non MLO STA all link + * specific STA information is accessed through @deflink or through + * link[0] which points to address of @deflink. For MLO Link STA + * the first added link STA will point to deflink. + * @link: reference to Link Sta entries. For Non MLO STA, except 1st link, + * i.e link[0] all links would be assigned to NULL by default and + * would access link information via @deflink or link[0]. For MLO + * STA, first link STA being added will point its link pointer to + * @deflink address and remaining would be allocated and the address + * would be assigned to link[link_id] where link_id is the id assigned + * by the AP. */ struct ieee80211_sta { - u32 supp_rates[NUM_NL80211_BANDS]; u8 addr[ETH_ALEN]; u16 aid; - struct ieee80211_sta_ht_cap ht_cap; - struct ieee80211_sta_vht_cap vht_cap; - struct ieee80211_sta_he_cap he_cap; - struct ieee80211_he_6ghz_capa he_6ghz_capa; - struct ieee80211_sta_eht_cap eht_cap; u16 max_rx_aggregation_subframes; bool wme; u8 uapsd_queues; u8 max_sp; - u8 rx_nss; - enum ieee80211_sta_rx_bandwidth bandwidth; enum ieee80211_smps_mode smps_mode; struct ieee80211_sta_rates __rcu *rates; bool tdls; @@ -2147,10 +2180,13 @@ struct ieee80211_sta { bool support_p2p_ps; u16 max_rc_amsdu_len; u16 max_tid_amsdu_len[IEEE80211_NUM_TIDS]; - struct ieee80211_sta_txpwr txpwr; struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1]; + bool multi_link_sta; + struct ieee80211_link_sta deflink; + struct ieee80211_link_sta *link[MAX_STA_LINKS]; + /* must be last */ u8 drv_priv[] __aligned(sizeof(void *)); }; @@ -2434,6 +2470,9 @@ struct ieee80211_txq { * usage and 802.11 frames with %RX_FLAG_ONLY_MONITOR set for monitor to * the stack. * + * @IEEE80211_HW_DETECTS_COLOR_COLLISION: HW/driver has support for BSS color + * collision detection and doesn't need it in software. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2489,6 +2528,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD, IEEE80211_HW_SUPPORTS_RX_DECAP_OFFLOAD, IEEE80211_HW_SUPPORTS_CONC_MON_RX_DECAP, + IEEE80211_HW_DETECTS_COLOR_COLLISION, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -6367,7 +6407,7 @@ static inline int rate_supported(struct ieee80211_sta *sta, enum nl80211_band band, int index) { - return (sta == NULL || sta->supp_rates[band] & BIT(index)); + return (sta == NULL || sta->deflink.supp_rates[band] & BIT(index)); } static inline s8 |