diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 587 |
1 files changed, 480 insertions, 107 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 80f41446b1f0..908d58393484 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -374,6 +374,7 @@ struct ieee80211_sta_he_cap { * and NSS Set field" * * @only_20mhz: MCS/NSS support for 20 MHz-only STA. + * @bw: MCS/NSS support for 80, 160 and 320 MHz * @bw._80: MCS/NSS support for BW <= 80 MHz * @bw._160: MCS/NSS support for BW = 160 MHz * @bw._320: MCS/NSS support for BW = 320 MHz @@ -420,6 +421,7 @@ struct ieee80211_sta_eht_cap { * @he_cap: holds the HE capabilities * @he_6ghz_capa: HE 6 GHz capabilities, must be filled in for a * 6 GHz band channel (and 0 may be valid value). + * @eht_cap: STA's EHT capabilities * @vendor_elems: vendor element(s) to advertise * @vendor_elems.data: vendor element(s) data * @vendor_elems.len: vendor element(s) length @@ -495,7 +497,7 @@ struct ieee80211_edmg { * This structure describes most essential parameters needed * to describe 802.11ah S1G capabilities for a STA. * - * @s1g_supported: is STA an S1G STA + * @s1g: is STA an S1G STA * @cap: S1G capabilities information * @nss_mcs: Supported NSS MCS set */ @@ -937,19 +939,18 @@ int cfg80211_chandef_dfs_required(struct wiphy *wiphy, enum nl80211_iftype iftype); /** - * ieee80211_chandef_rate_flags - returns rate flags for a channel + * ieee80211_chanwidth_rate_flags - return rate flags for channel width + * @width: the channel width of the channel * * In some channel types, not all rates may be used - for example CCK * rates may not be used in 5/10 MHz channels. * - * @chandef: channel definition for the channel - * - * Returns: rate flags which apply for this channel + * Returns: rate flags which apply for this channel width */ static inline enum ieee80211_rate_flags -ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) +ieee80211_chanwidth_rate_flags(enum nl80211_chan_width width) { - switch (chandef->width) { + switch (width) { case NL80211_CHAN_WIDTH_5: return IEEE80211_RATE_SUPPORTS_5MHZ; case NL80211_CHAN_WIDTH_10: @@ -961,6 +962,20 @@ ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) } /** + * ieee80211_chandef_rate_flags - returns rate flags for a channel + * @chandef: channel definition for the channel + * + * See ieee80211_chanwidth_rate_flags(). + * + * Returns: rate flags which apply for this channel + */ +static inline enum ieee80211_rate_flags +ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) +{ + return ieee80211_chanwidth_rate_flags(chandef->width); +} + +/** * ieee80211_chandef_max_power - maximum transmission power for the chandef * * In some regulations, the transmit power may depend on the configured channel @@ -1061,6 +1076,7 @@ struct survey_info { }; #define CFG80211_MAX_WEP_KEYS 4 +#define CFG80211_MAX_NUM_AKM_SUITES 10 /** * struct cfg80211_crypto_settings - Crypto settings @@ -1112,7 +1128,7 @@ struct cfg80211_crypto_settings { int n_ciphers_pairwise; u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; int n_akm_suites; - u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; + u32 akm_suites[CFG80211_MAX_NUM_AKM_SUITES]; bool control_port; __be16 control_port_ethertype; bool control_port_no_encrypt; @@ -1158,6 +1174,7 @@ struct cfg80211_mbssid_elems { /** * struct cfg80211_beacon_data - beacon data + * @link_id: the link ID for the AP MLD link sending this beacon * @head: head portion of beacon (before TIM IE) * or %NULL if not changed * @tail: tail portion of beacon (after TIM IE) @@ -1188,6 +1205,8 @@ struct cfg80211_mbssid_elems { * attribute is present in beacon data or not. */ struct cfg80211_beacon_data { + unsigned int link_id; + const u8 *head, *tail; const u8 *beacon_ies; const u8 *proberesp_ies; @@ -1290,6 +1309,8 @@ struct cfg80211_unsol_bcast_probe_resp { * @ht_cap: HT capabilities (or %NULL if HT isn't enabled) * @vht_cap: VHT capabilities (or %NULL if VHT isn't enabled) * @he_cap: HE capabilities (or %NULL if HE isn't enabled) + * @eht_cap: EHT capabilities (or %NULL if EHT isn't enabled) + * @eht_oper: EHT operation IE (or %NULL if EHT isn't enabled) * @ht_required: stations must support HT * @vht_required: stations must support VHT * @twt_responder: Enable Target Wait Time @@ -1326,6 +1347,8 @@ struct cfg80211_ap_settings { const struct ieee80211_vht_cap *vht_cap; const struct ieee80211_he_cap_elem *he_cap; const struct ieee80211_he_operation *he_oper; + const struct ieee80211_eht_cap_elem *eht_cap; + const struct ieee80211_eht_operation *eht_oper; bool ht_required, vht_required, he_required, sae_h2e_required; bool twt_responder; u32 flags; @@ -1370,8 +1393,8 @@ struct cfg80211_csa_settings { * Used for bss color change * * @beacon_color_change: beacon data while performing the color countdown - * @counter_offsets_beacon: offsets of the counters within the beacon (tail) - * @counter_offsets_presp: offsets of the counters within the probe response + * @counter_offset_beacon: offsets of the counters within the beacon (tail) + * @counter_offset_presp: offsets of the counters within the probe response * @beacon_next: beacon data to be used after the color change * @count: number of beacons until the color change * @color: the color used after the change @@ -1414,6 +1437,7 @@ struct iface_combination_params { * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) * @STATION_PARAM_APPLY_CAPABILITY: apply new capability * @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state + * @STATION_PARAM_APPLY_STA_TXPOWER: apply tx power for STA * * Not all station parameters have in-band "no change" signalling, * for those that don't these flags will are used. @@ -1422,7 +1446,6 @@ enum station_parameters_apply_mask { STATION_PARAM_APPLY_UAPSD = BIT(0), STATION_PARAM_APPLY_CAPABILITY = BIT(1), STATION_PARAM_APPLY_PLINK_STATE = BIT(2), - STATION_PARAM_APPLY_STA_TXPOWER = BIT(3), }; /** @@ -1446,14 +1469,66 @@ struct sta_txpwr { }; /** - * struct station_parameters - station parameters + * struct link_station_parameters - link station parameters * - * Used to change and create a new station. + * Used to change and create a new link station. * - * @vlan: vlan interface station should belong to + * @mld_mac: MAC address of the station + * @link_id: the link id (-1 for non-MLD station) + * @link_mac: MAC address of the link * @supported_rates: supported rates in IEEE 802.11 format * (or NULL for no change) * @supported_rates_len: number of supported rates + * @ht_capa: HT capabilities of station + * @vht_capa: VHT capabilities of station + * @opmode_notif: operating mode field from Operating Mode Notification + * @opmode_notif_used: information if operating mode field is used + * @he_capa: HE capabilities of station + * @he_capa_len: the length of the HE capabilities + * @txpwr: transmit power for an associated station + * @txpwr_set: txpwr field is set + * @he_6ghz_capa: HE 6 GHz Band capabilities of station + * @eht_capa: EHT capabilities of station + * @eht_capa_len: the length of the EHT capabilities + */ +struct link_station_parameters { + const u8 *mld_mac; + int link_id; + const u8 *link_mac; + const u8 *supported_rates; + u8 supported_rates_len; + const struct ieee80211_ht_cap *ht_capa; + const struct ieee80211_vht_cap *vht_capa; + u8 opmode_notif; + bool opmode_notif_used; + const struct ieee80211_he_cap_elem *he_capa; + u8 he_capa_len; + struct sta_txpwr txpwr; + bool txpwr_set; + const struct ieee80211_he_6ghz_capa *he_6ghz_capa; + const struct ieee80211_eht_cap_elem *eht_capa; + u8 eht_capa_len; +}; + +/** + * struct link_station_del_parameters - link station deletion parameters + * + * Used to delete a link station entry (or all stations). + * + * @mld_mac: MAC address of the station + * @link_id: the link id + */ +struct link_station_del_parameters { + const u8 *mld_mac; + u32 link_id; +}; + +/** + * struct station_parameters - station parameters + * + * Used to change and create a new station. + * + * @vlan: vlan interface station should belong to * @sta_flags_mask: station flags that changed * (bitmask of BIT(%NL80211_STA_FLAG_...)) * @sta_flags_set: station flags values @@ -1464,8 +1539,6 @@ struct sta_txpwr { * @peer_aid: mesh peer AID or zero for no change * @plink_action: plink action to take * @plink_state: set the peer link state for a station - * @ht_capa: HT capabilities of station - * @vht_capa: VHT capabilities of station * @uapsd_queues: bitmap of queues configured for uapsd. same format * as the AC bitmap in the QoS info field * @max_sp: max Service Period. same format as the MAX_SP in the @@ -1482,19 +1555,11 @@ struct sta_txpwr { * @supported_channels_len: number of supported channels * @supported_oper_classes: supported oper classes in IEEE 802.11 format * @supported_oper_classes_len: number of supported operating classes - * @opmode_notif: operating mode field from Operating Mode Notification - * @opmode_notif_used: information if operating mode field is used * @support_p2p_ps: information if station supports P2P PS mechanism - * @he_capa: HE capabilities of station - * @he_capa_len: the length of the HE capabilities * @airtime_weight: airtime scheduler weight for this station - * @txpwr: transmit power for an associated station - * @he_6ghz_capa: HE 6 GHz Band capabilities of station - * @eht_capa: EHT capabilities of station - * @eht_capa_len: the length of the EHT capabilities + * @link_sta_params: link related params. */ struct station_parameters { - const u8 *supported_rates; struct net_device *vlan; u32 sta_flags_mask, sta_flags_set; u32 sta_modify_mask; @@ -1502,11 +1567,8 @@ struct station_parameters { u16 aid; u16 vlan_id; u16 peer_aid; - u8 supported_rates_len; u8 plink_action; u8 plink_state; - const struct ieee80211_ht_cap *ht_capa; - const struct ieee80211_vht_cap *vht_capa; u8 uapsd_queues; u8 max_sp; enum nl80211_mesh_power_mode local_pm; @@ -1517,16 +1579,9 @@ struct station_parameters { u8 supported_channels_len; const u8 *supported_oper_classes; u8 supported_oper_classes_len; - u8 opmode_notif; - bool opmode_notif_used; int support_p2p_ps; - const struct ieee80211_he_cap_elem *he_capa; - u8 he_capa_len; u16 airtime_weight; - struct sta_txpwr txpwr; - const struct ieee80211_he_6ghz_capa *he_6ghz_capa; - const struct ieee80211_eht_cap_elem *eht_capa; - u8 eht_capa_len; + struct link_station_parameters link_sta_params; }; /** @@ -2146,6 +2201,9 @@ struct bss_parameters { * @plink_timeout: If no tx activity is seen from a STA we've established * peering with for longer than this time (in seconds), then remove it * from the STA's list of peers. Default is 30 minutes. + * @dot11MeshConnectedToAuthServer: if set to true then this mesh STA + * will advertise that it is connected to a authentication server + * in the mesh formation field. * @dot11MeshConnectedToMeshGate: if set to true, advertise that this STA is * connected to a mesh gate in mesh formation info. If false, the * value in mesh formation is determined by the presence of root paths @@ -2318,12 +2376,12 @@ struct cfg80211_scan_info { /** * struct cfg80211_scan_6ghz_params - relevant for 6 GHz only * - * @short_bssid: short ssid to scan for + * @short_ssid: short ssid to scan for * @bssid: bssid to scan for * @channel_idx: idx of the channel in the channel array in the scan request * which the above info relvant to * @unsolicited_probe: the AP transmits unsolicited probe response every 20 TU - * @short_ssid_valid: short_ssid is valid and can be used + * @short_ssid_valid: @short_ssid is valid and can be used * @psc_no_listen: when set, and the channel is a PSC channel, no need to wait * 20 TUs before starting to send probe requests. */ @@ -2715,6 +2773,12 @@ static inline const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 id) * Authentication algorithm number, i.e., starting at the Authentication * transaction sequence number field. * @auth_data_len: Length of auth_data buffer in octets + * @link_id: if >= 0, indicates authentication should be done as an MLD, + * the interface address is included as the MLD address and the + * necessary link (with the given link_id) will be created (and + * given an MLD address) by the driver + * @ap_mld_addr: AP MLD address in case of authentication request with + * an AP MLD, valid iff @link_id >= 0 */ struct cfg80211_auth_request { struct cfg80211_bss *bss; @@ -2722,9 +2786,25 @@ struct cfg80211_auth_request { size_t ie_len; enum nl80211_auth_type auth_type; const u8 *key; - u8 key_len, key_idx; + u8 key_len; + s8 key_idx; const u8 *auth_data; size_t auth_data_len; + s8 link_id; + const u8 *ap_mld_addr; +}; + +/** + * struct cfg80211_assoc_link - per-link information for MLO association + * @bss: the BSS pointer, see also &struct cfg80211_assoc_request::bss; + * if this is %NULL for a link, that link is not requested + * @elems: extra elements for the per-STA profile for this link + * @elems_len: length of the elements + */ +struct cfg80211_assoc_link { + struct cfg80211_bss *bss; + const u8 *elems; + size_t elems_len; }; /** @@ -2739,6 +2819,9 @@ struct cfg80211_auth_request { * request (connect callback). * @ASSOC_REQ_DISABLE_HE: Disable HE * @ASSOC_REQ_DISABLE_EHT: Disable EHT + * @CONNECT_REQ_MLO_SUPPORT: Userspace indicates support for handling MLD links. + * Drivers shall disable MLO features for the current association if this + * flag is not set. */ enum cfg80211_assoc_req_flags { ASSOC_REQ_DISABLE_HT = BIT(0), @@ -2747,6 +2830,7 @@ enum cfg80211_assoc_req_flags { CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3), ASSOC_REQ_DISABLE_HE = BIT(4), ASSOC_REQ_DISABLE_EHT = BIT(5), + CONNECT_REQ_MLO_SUPPORT = BIT(6), }; /** @@ -2758,6 +2842,8 @@ enum cfg80211_assoc_req_flags { * given a reference that it must give back to cfg80211_send_rx_assoc() * or to cfg80211_assoc_timeout(). To ensure proper refcounting, new * association requests while already associating must be rejected. + * This also applies to the @links.bss parameter, which is used instead + * of this one (it is %NULL) for MLO associations. * @ie: Extra IEs to add to (Re)Association Request frame or %NULL * @ie_len: Length of ie buffer in octets * @use_mfp: Use management frame protection (IEEE 802.11w) in this association @@ -2782,6 +2868,11 @@ enum cfg80211_assoc_req_flags { * with 16 octets of STA Nonce followed by 16 octets of AP Nonce. * @s1g_capa: S1G capability override * @s1g_capa_mask: S1G capability override mask + * @links: per-link information for MLO connections + * @link_id: >= 0 for MLO connections, where links are given, and indicates + * the link on which the association request should be sent + * @ap_mld_addr: AP MLD address in case of MLO association request, + * valid iff @link_id >= 0 */ struct cfg80211_assoc_request { struct cfg80211_bss *bss; @@ -2797,6 +2888,9 @@ struct cfg80211_assoc_request { size_t fils_kek_len; const u8 *fils_nonces; struct ieee80211_s1g_cap s1g_capa, s1g_capa_mask; + struct cfg80211_assoc_link links[IEEE80211_MLD_MAX_NUM_LINKS]; + const u8 *ap_mld_addr; + s8 link_id; }; /** @@ -2805,7 +2899,7 @@ struct cfg80211_assoc_request { * This structure provides information needed to complete IEEE 802.11 * deauthentication. * - * @bssid: the BSSID of the BSS to deauthenticate from + * @bssid: the BSSID or AP MLD address to deauthenticate from * @ie: Extra IEs to add to Deauthentication frame or %NULL * @ie_len: Length of ie buffer in octets * @reason_code: The reason code for the deauthentication @@ -2826,7 +2920,7 @@ struct cfg80211_deauth_request { * This structure provides information needed to complete IEEE 802.11 * disassociation. * - * @bss: the BSS to disassociate from + * @ap_addr: the BSSID or AP MLD address to disassociate from * @ie: Extra IEs to add to Disassociation frame or %NULL * @ie_len: Length of ie buffer in octets * @reason_code: The reason code for the disassociation @@ -2834,7 +2928,7 @@ struct cfg80211_deauth_request { * Disassociation frame is to be transmitted. */ struct cfg80211_disassoc_request { - struct cfg80211_bss *bss; + const u8 *ap_addr; const u8 *ie; size_t ie_len; u16 reason_code; @@ -3279,7 +3373,7 @@ struct cfg80211_wowlan_wakeup { * @kck: key confirmation key (@kck_len bytes) * @replay_ctr: replay counter (NL80211_REPLAY_CTR_LEN bytes) * @kek_len: length of kek - * @kck_len length of kck + * @kck_len: length of kck * @akm: akm (oui, id) */ struct cfg80211_gtk_rekey_data { @@ -3317,6 +3411,9 @@ struct cfg80211_update_ft_ies_params { * @dont_wait_for_ack: tells the low level not to wait for an ack * @n_csa_offsets: length of csa_offsets array * @csa_offsets: array of all the csa offsets in the frame + * @link_id: for MLO, the link ID to transmit on, -1 if not given; note + * that the link ID isn't validated (much), it's in range but the + * link might not exist (or be used by the receiver STA) */ struct cfg80211_mgmt_tx_params { struct ieee80211_channel *chan; @@ -3328,6 +3425,7 @@ struct cfg80211_mgmt_tx_params { bool dont_wait_for_ack; int n_csa_offsets; const u16 *csa_offsets; + int link_id; }; /** @@ -3641,6 +3739,7 @@ struct cfg80211_pmsr_ftm_result { * @type: type of the measurement reported, note that we only support reporting * one type at a time, but you can report multiple results separately and * they're all aggregated for userspace. + * @ftm: FTM result */ struct cfg80211_pmsr_result { u64 host_time, ap_tsf; @@ -3779,7 +3878,7 @@ struct cfg80211_update_owe_info { * for the entire device * @interface_stypes: bitmap of management frame subtypes registered * for the given interface - * @global_mcast_rx: mcast RX is needed globally for these subtypes + * @global_mcast_stypes: mcast RX is needed globally for these subtypes * @interface_mcast_stypes: mcast RX is needed on this interface * for these subtypes */ @@ -3824,6 +3923,11 @@ struct mgmt_frame_regs { * keep the struct wireless_dev's iftype updated. * This additionally holds the RTNL to be able to do netdev changes. * + * @add_intf_link: Add a new MLO link to the given interface. Note that + * the wdev->link[] data structure has been updated, so the new link + * address is available. + * @del_intf_link: Remove an MLO link from the given interface. + * * @add_key: add a key with the given parameters. @mac_addr will be %NULL * when adding a group key. * @@ -4160,6 +4264,9 @@ struct mgmt_frame_regs { * radar channel. * The caller is expected to set chandef pointer to NULL in order to * disable background CAC/radar detection. + * @add_link_station: Add a link to a station. + * @mod_link_station: Modify a link of a station. + * @del_link_station: Remove a link of a station. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -4178,6 +4285,13 @@ struct cfg80211_ops { enum nl80211_iftype type, struct vif_params *params); + int (*add_intf_link)(struct wiphy *wiphy, + struct wireless_dev *wdev, + unsigned int link_id); + void (*del_intf_link)(struct wiphy *wiphy, + struct wireless_dev *wdev, + unsigned int link_id); + int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index, bool pairwise, const u8 *mac_addr, struct key_params *params); @@ -4201,7 +4315,8 @@ struct cfg80211_ops { struct cfg80211_ap_settings *settings); int (*change_beacon)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_beacon_data *info); - int (*stop_ap)(struct wiphy *wiphy, struct net_device *dev); + int (*stop_ap)(struct wiphy *wiphy, struct net_device *dev, + unsigned int link_id); int (*add_station)(struct wiphy *wiphy, struct net_device *dev, @@ -4309,6 +4424,7 @@ struct cfg80211_ops { int (*set_bitrate_mask)(struct wiphy *wiphy, struct net_device *dev, + unsigned int link_id, const u8 *peer, const struct cfg80211_bitrate_mask *mask); @@ -4384,6 +4500,7 @@ struct cfg80211_ops { int (*get_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, + unsigned int link_id, struct cfg80211_chan_def *chandef); int (*start_p2p_device)(struct wiphy *wiphy, @@ -4420,6 +4537,7 @@ struct cfg80211_ops { struct cfg80211_qos_map *qos_map); int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev, + unsigned int link_id, struct cfg80211_chan_def *chandef); int (*add_tx_ts)(struct wiphy *wiphy, struct net_device *dev, @@ -4466,7 +4584,7 @@ struct cfg80211_ops { struct net_device *dev, const u8 *buf, size_t len, const u8 *dest, const __be16 proto, - const bool noencrypt, + const bool noencrypt, int link_id, u64 *cookie); int (*get_ftm_responder_stats)(struct wiphy *wiphy, @@ -4494,6 +4612,12 @@ struct cfg80211_ops { struct cfg80211_fils_aad *fils_aad); int (*set_radar_background)(struct wiphy *wiphy, struct cfg80211_chan_def *chandef); + int (*add_link_station)(struct wiphy *wiphy, struct net_device *dev, + struct link_station_parameters *params); + int (*mod_link_station)(struct wiphy *wiphy, struct net_device *dev, + struct link_station_parameters *params); + int (*del_link_station)(struct wiphy *wiphy, struct net_device *dev, + struct link_station_del_parameters *params); }; /* @@ -4545,10 +4669,14 @@ struct cfg80211_ops { * @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation * before connection. * @WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK: The device supports bigger kek and kck keys + * @WIPHY_FLAG_SUPPORTS_MLO: This is a temporary flag gating the MLO APIs, + * in order to not have them reachable in normal drivers, until we have + * complete feature/interface combinations/etc. advertisement. No driver + * should set this flag for now. */ enum wiphy_flags { WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK = BIT(0), - /* use hole at 1 */ + WIPHY_FLAG_SUPPORTS_MLO = BIT(1), WIPHY_FLAG_SPLIT_SCAN_6GHZ = BIT(2), WIPHY_FLAG_NETNS_OK = BIT(3), WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), @@ -4869,19 +4997,32 @@ struct wiphy_vendor_command { * 802.11-2012 8.4.2.29 for the defined fields. * @extended_capabilities_mask: mask of the valid values * @extended_capabilities_len: length of the extended capabilities + * @eml_capabilities: EML capabilities (for MLO) + * @mld_capa_and_ops: MLD capabilities and operations (for MLO) */ struct wiphy_iftype_ext_capab { enum nl80211_iftype iftype; const u8 *extended_capabilities; const u8 *extended_capabilities_mask; u8 extended_capabilities_len; + u16 eml_capabilities; + u16 mld_capa_and_ops; }; /** + * cfg80211_get_iftype_ext_capa - lookup interface type extended capability + * @wiphy: the wiphy to look up from + * @type: the interface type to look up + */ +const struct wiphy_iftype_ext_capab * +cfg80211_get_iftype_ext_capa(struct wiphy *wiphy, enum nl80211_iftype type); + +/** * struct cfg80211_pmsr_capabilities - cfg80211 peer measurement capabilities * @max_peers: maximum number of peers in a single measurement * @report_ap_tsf: can report assoc AP's TSF for radio resource measurement * @randomize_mac_addr: can randomize MAC address for measurement + * @ftm: FTM measurement data * @ftm.supported: FTM measurement is supported * @ftm.asap: ASAP-mode is supported * @ftm.non_asap: non-ASAP-mode is supported @@ -5134,6 +5275,13 @@ struct wiphy_iftype_akm_suites { * @ema_max_profile_periodicity: maximum profile periodicity supported by * the driver. Setting this field to a non-zero value indicates that the * driver supports enhanced multi-BSSID advertisements (EMA AP). + * @max_num_akm_suites: maximum number of AKM suites allowed for + * configuration through %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and + * %NL80211_CMD_START_AP. Set to NL80211_MAX_NR_AKM_SUITES if not set by + * driver. If set by driver minimum allowed value is + * NL80211_MAX_NR_AKM_SUITES in order to avoid compatibility issues with + * legacy userspace and maximum allowed value is + * CFG80211_MAX_NUM_AKM_SUITES. */ struct wiphy { struct mutex mtx; @@ -5280,6 +5428,7 @@ struct wiphy { u8 mbssid_max_interfaces; u8 ema_max_profile_periodicity; + u16 max_num_akm_suites; char priv[] __aligned(NETDEV_ALIGN); }; @@ -5505,16 +5654,9 @@ static inline void wiphy_unlock(struct wiphy *wiphy) * @netdev: (private) Used to reference back to the netdev, may be %NULL * @identifier: (private) Identifier used in nl80211 to identify this * wireless device if it has no netdev - * @current_bss: (private) Used by the internal configuration code - * @chandef: (private) Used by the internal configuration code to track - * the user-set channel definition. - * @preset_chandef: (private) Used by the internal configuration code to - * track the channel to be used for AP later + * @u: union containing data specific to @iftype + * @connected: indicates if connected or not (STA mode) * @bssid: (private) Used by the internal configuration code - * @ssid: (private) Used by the internal configuration code - * @ssid_len: (private) Used by the internal configuration code - * @mesh_id_len: (private) Used by the internal configuration code - * @mesh_id_up_len: (private) Used by the internal configuration code * @wext: (private) Used by the internal wireless extensions compat code * @wext.ibss: (private) IBSS data part of wext handling * @wext.connect: (private) connection handling data @@ -5564,6 +5706,9 @@ static inline void wiphy_unlock(struct wiphy *wiphy) * @pmsr_free_wk: (private) peer measurements cleanup work * @unprot_beacon_reported: (private) timestamp of last * unprotected beacon report + * @links: array of %IEEE80211_MLD_MAX_NUM_LINKS elements containing @addr + * @ap and @client for each link + * @valid_links: bitmap describing what elements of @links are valid */ struct wireless_dev { struct wiphy *wiphy; @@ -5585,8 +5730,6 @@ struct wireless_dev { u8 address[ETH_ALEN] __aligned(sizeof(u16)); /* currently used for IBSS and SME - might be rearranged later */ - u8 ssid[IEEE80211_MAX_SSID_LEN]; - u8 ssid_len, mesh_id_len, mesh_id_up_len; struct cfg80211_conn *conn; struct cfg80211_cached_keys *connect_keys; enum ieee80211_bss_type conn_bss_type; @@ -5598,20 +5741,17 @@ struct wireless_dev { struct list_head event_list; spinlock_t event_lock; - struct cfg80211_internal_bss *current_bss; /* associated / joined */ - struct cfg80211_chan_def preset_chandef; - struct cfg80211_chan_def chandef; + u8 connected:1; bool ps; int ps_timeout; - int beacon_interval; - u32 ap_unexpected_nlportid; u32 owner_nlportid; bool nl_owner_dead; + /* FIXME: need to rework radar detection for MLO */ bool cac_started; unsigned long cac_start_time; unsigned int cac_time_ms; @@ -5639,6 +5779,50 @@ struct wireless_dev { struct work_struct pmsr_free_wk; unsigned long unprot_beacon_reported; + + union { + struct { + u8 connected_addr[ETH_ALEN] __aligned(2); + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; + } client; + struct { + int beacon_interval; + struct cfg80211_chan_def preset_chandef; + struct cfg80211_chan_def chandef; + u8 id[IEEE80211_MAX_SSID_LEN]; + u8 id_len, id_up_len; + } mesh; + struct { + struct cfg80211_chan_def preset_chandef; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; + } ap; + struct { + struct cfg80211_internal_bss *current_bss; + struct cfg80211_chan_def chandef; + int beacon_interval; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; + } ibss; + struct { + struct cfg80211_chan_def chandef; + } ocb; + } u; + + struct { + u8 addr[ETH_ALEN] __aligned(2); + union { + struct { + unsigned int beacon_interval; + struct cfg80211_chan_def chandef; + } ap; + struct { + struct cfg80211_internal_bss *current_bss; + } client; + }; + } links[IEEE80211_MLD_MAX_NUM_LINKS]; + u16 valid_links; }; static inline const u8 *wdev_address(struct wireless_dev *wdev) @@ -5668,6 +5852,32 @@ static inline void *wdev_priv(struct wireless_dev *wdev) } /** + * wdev_chandef - return chandef pointer from wireless_dev + * @wdev: the wdev + * @link_id: the link ID for MLO + * + * Return: The chandef depending on the mode, or %NULL. + */ +struct cfg80211_chan_def *wdev_chandef(struct wireless_dev *wdev, + unsigned int link_id); + +static inline void WARN_INVALID_LINK_ID(struct wireless_dev *wdev, + unsigned int link_id) +{ + WARN_ON(link_id && !wdev->valid_links); + WARN_ON(wdev->valid_links && + !(wdev->valid_links & BIT(link_id))); +} + +#define for_each_valid_link(link_info, link_id) \ + for (link_id = 0; \ + link_id < ((link_info)->valid_links ? \ + ARRAY_SIZE((link_info)->links) : 1); \ + link_id++) \ + if (!(link_info)->valid_links || \ + ((link_info)->valid_links & BIT(link_id))) + +/** * DOC: Utility functions * * cfg80211 offers a number of utility functions that can be useful. @@ -5943,6 +6153,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); * @addr: the device MAC address * @iftype: the virtual interface type * @data_offset: offset of payload after the 802.11 header + * @is_amsdu: true if the 802.11 header is A-MSDU * Return: 0 on success. Non-zero on error. */ int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr, @@ -6695,16 +6906,36 @@ void cfg80211_rx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); /** - * cfg80211_rx_assoc_resp - notification of processed association response - * @dev: network device + * struct cfg80211_rx_assoc_resp - association response data * @bss: the BSS that association was requested with, ownership of the pointer - * moves to cfg80211 in this call + * moves to cfg80211 in the call to cfg80211_rx_assoc_resp() * @buf: (Re)Association Response frame (header + body) * @len: length of the frame data * @uapsd_queues: bitmap of queues configured for uapsd. Same format * as the AC bitmap in the QoS info field * @req_ies: information elements from the (Re)Association Request frame * @req_ies_len: length of req_ies data + * @ap_mld_addr: AP MLD address (in case of MLO) + * @links: per-link information indexed by link ID, use links[0] for + * non-MLO connections + */ +struct cfg80211_rx_assoc_resp { + const u8 *buf; + size_t len; + const u8 *req_ies; + size_t req_ies_len; + int uapsd_queues; + const u8 *ap_mld_addr; + struct { + const u8 *addr; + struct cfg80211_bss *bss; + } links[IEEE80211_MLD_MAX_NUM_LINKS]; +}; + +/** + * cfg80211_rx_assoc_resp - notification of processed association response + * @dev: network device + * @data: association response data, &struct cfg80211_rx_assoc_resp * * After being asked to associate via cfg80211_ops::assoc() the driver must * call either this function or cfg80211_auth_timeout(). @@ -6712,30 +6943,32 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); * This function may sleep. The caller must hold the corresponding wdev's mutex. */ void cfg80211_rx_assoc_resp(struct net_device *dev, - struct cfg80211_bss *bss, - const u8 *buf, size_t len, - int uapsd_queues, - const u8 *req_ies, size_t req_ies_len); + struct cfg80211_rx_assoc_resp *data); /** - * cfg80211_assoc_timeout - notification of timed out association - * @dev: network device - * @bss: The BSS entry with which association timed out. - * - * This function may sleep. The caller must hold the corresponding wdev's mutex. + * struct cfg80211_assoc_failure - association failure data + * @ap_mld_addr: AP MLD address, or %NULL + * @bss: list of BSSes, must use entry 0 for non-MLO connections + * (@ap_mld_addr is %NULL) + * @timeout: indicates the association failed due to timeout, otherwise + * the association was abandoned for a reason reported through some + * other API (e.g. deauth RX) */ -void cfg80211_assoc_timeout(struct net_device *dev, struct cfg80211_bss *bss); +struct cfg80211_assoc_failure { + const u8 *ap_mld_addr; + struct cfg80211_bss *bss[IEEE80211_MLD_MAX_NUM_LINKS]; + bool timeout; +}; /** - * cfg80211_abandon_assoc - notify cfg80211 of abandoned association attempt + * cfg80211_assoc_failure - notification of association failure * @dev: network device - * @bss: The BSS entry with which association was abandoned. + * @data: data describing the association failure * - * Call this whenever - for reasons reported through other API, like deauth RX, - * an association attempt was abandoned. * This function may sleep. The caller must hold the corresponding wdev's mutex. */ -void cfg80211_abandon_assoc(struct net_device *dev, struct cfg80211_bss *bss); +void cfg80211_assoc_failure(struct net_device *dev, + struct cfg80211_assoc_failure *data); /** * cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame @@ -6812,6 +7045,7 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, * @macaddr: the MAC address of the new candidate * @ie: information elements advertised by the peer candidate * @ie_len: length of the information elements buffer + * @sig_dbm: signal level in dBm * @gfp: allocation flags * * This function notifies cfg80211 that the mesh peer candidate has been @@ -7176,13 +7410,6 @@ struct cfg80211_fils_resp_params { * indicate that this is a failure, but without a status code. * @timeout_reason is used to report the reason for the timeout in that * case. - * @bssid: The BSSID of the AP (may be %NULL) - * @bss: Entry of bss to which STA got connected to, can be obtained through - * cfg80211_get_bss() (may be %NULL). But it is recommended to store the - * bss from the connect_request and hold a reference to it and return - * through this param to avoid a warning if the bss is expired during the - * connection, esp. for those drivers implementing connect op. - * Only one parameter among @bssid and @bss needs to be specified. * @req_ie: Association request IEs (may be %NULL) * @req_ie_len: Association request IEs length * @resp_ie: Association response IEs (may be %NULL) @@ -7194,17 +7421,41 @@ struct cfg80211_fils_resp_params { * not known. This value is used only if @status < 0 to indicate that the * failure is due to a timeout and not due to explicit rejection by the AP. * This value is ignored in other cases (@status >= 0). + * @valid_links: For MLO connection, BIT mask of the valid link ids. Otherwise + * zero. + * @ap_mld_addr: For MLO connection, MLD address of the AP. Otherwise %NULL. + * @links : For MLO connection, contains link info for the valid links indicated + * using @valid_links. For non-MLO connection, links[0] contains the + * connected AP info. + * @links.addr: For MLO connection, MAC address of the STA link. Otherwise + * %NULL. + * @links.bssid: For MLO connection, MAC address of the AP link. For non-MLO + * connection, links[0].bssid points to the BSSID of the AP (may be %NULL). + * @links.bss: For MLO connection, entry of bss to which STA link is connected. + * For non-MLO connection, links[0].bss points to entry of bss to which STA + * is connected. It can be obtained through cfg80211_get_bss() (may be + * %NULL). It is recommended to store the bss from the connect_request and + * hold a reference to it and return through this param to avoid a warning + * if the bss is expired during the connection, esp. for those drivers + * implementing connect op. Only one parameter among @bssid and @bss needs + * to be specified. */ struct cfg80211_connect_resp_params { int status; - const u8 *bssid; - struct cfg80211_bss *bss; const u8 *req_ie; size_t req_ie_len; const u8 *resp_ie; size_t resp_ie_len; struct cfg80211_fils_resp_params fils; enum nl80211_timeout_reason timeout_reason; + + const u8 *ap_mld_addr; + u16 valid_links; + struct { + const u8 *addr; + const u8 *bssid; + struct cfg80211_bss *bss; + } links[IEEE80211_MLD_MAX_NUM_LINKS]; }; /** @@ -7274,8 +7525,8 @@ cfg80211_connect_bss(struct net_device *dev, const u8 *bssid, memset(¶ms, 0, sizeof(params)); params.status = status; - params.bssid = bssid; - params.bss = bss; + params.links[0].bssid = bssid; + params.links[0].bss = bss; params.req_ie = req_ie; params.req_ie_len = req_ie_len; params.resp_ie = resp_ie; @@ -7346,24 +7597,40 @@ cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid, /** * struct cfg80211_roam_info - driver initiated roaming information * - * @channel: the channel of the new AP - * @bss: entry of bss to which STA got roamed (may be %NULL if %bssid is set) - * @bssid: the BSSID of the new AP (may be %NULL if %bss is set) * @req_ie: association request IEs (maybe be %NULL) * @req_ie_len: association request IEs length * @resp_ie: association response IEs (may be %NULL) * @resp_ie_len: assoc response IEs length * @fils: FILS related roaming information. + * @valid_links: For MLO roaming, BIT mask of the new valid links is set. + * Otherwise zero. + * @ap_mld_addr: For MLO roaming, MLD address of the new AP. Otherwise %NULL. + * @links : For MLO roaming, contains new link info for the valid links set in + * @valid_links. For non-MLO roaming, links[0] contains the new AP info. + * @links.addr: For MLO roaming, MAC address of the STA link. Otherwise %NULL. + * @links.bssid: For MLO roaming, MAC address of the new AP link. For non-MLO + * roaming, links[0].bssid points to the BSSID of the new AP. May be + * %NULL if %links.bss is set. + * @links.channel: the channel of the new AP. + * @links.bss: For MLO roaming, entry of new bss to which STA link got + * roamed. For non-MLO roaming, links[0].bss points to entry of bss to + * which STA got roamed (may be %NULL if %links.bssid is set) */ struct cfg80211_roam_info { - struct ieee80211_channel *channel; - struct cfg80211_bss *bss; - const u8 *bssid; const u8 *req_ie; size_t req_ie_len; const u8 *resp_ie; size_t resp_ie_len; struct cfg80211_fils_resp_params fils; + + const u8 *ap_mld_addr; + u16 valid_links; + struct { + const u8 *addr; + const u8 *bssid; + struct ieee80211_channel *channel; + struct cfg80211_bss *bss; + } links[IEEE80211_MLD_MAX_NUM_LINKS]; }; /** @@ -7530,6 +7797,48 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, gfp_t gfp); /** + * struct cfg80211_rx_info - received management frame info + * + * @freq: Frequency on which the frame was received in kHz + * @sig_dbm: signal strength in dBm, or 0 if unknown + * @have_link_id: indicates the frame was received on a link of + * an MLD, i.e. the @link_id field is valid + * @link_id: the ID of the link the frame was received on + * @buf: Management frame (header + body) + * @len: length of the frame data + * @flags: flags, as defined in enum nl80211_rxmgmt_flags + * @rx_tstamp: Hardware timestamp of frame RX in nanoseconds + * @ack_tstamp: Hardware timestamp of ack TX in nanoseconds + */ +struct cfg80211_rx_info { + int freq; + int sig_dbm; + bool have_link_id; + u8 link_id; + const u8 *buf; + size_t len; + u32 flags; + u64 rx_tstamp; + u64 ack_tstamp; +}; + +/** + * cfg80211_rx_mgmt_ext - management frame notification with extended info + * @wdev: wireless device receiving the frame + * @info: RX info as defined in struct cfg80211_rx_info + * + * This function is called whenever an Action frame is received for a station + * mode interface, but is not processed in kernel. + * + * Return: %true if a user space application has registered for this frame. + * For action frames, that makes it responsible for rejecting unrecognized + * action frames; %false otherwise, in which case for action frames the + * driver is responsible for rejecting the frame. + */ +bool cfg80211_rx_mgmt_ext(struct wireless_dev *wdev, + struct cfg80211_rx_info *info); + +/** * cfg80211_rx_mgmt_khz - notification of received, unprocessed management frame * @wdev: wireless device receiving the frame * @freq: Frequency on which the frame was received in KHz @@ -7546,8 +7855,20 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, * action frames; %false otherwise, in which case for action frames the * driver is responsible for rejecting the frame. */ -bool cfg80211_rx_mgmt_khz(struct wireless_dev *wdev, int freq, int sig_dbm, - const u8 *buf, size_t len, u32 flags); +static inline bool cfg80211_rx_mgmt_khz(struct wireless_dev *wdev, int freq, + int sig_dbm, const u8 *buf, size_t len, + u32 flags) +{ + struct cfg80211_rx_info info = { + .freq = freq, + .sig_dbm = sig_dbm, + .buf = buf, + .len = len, + .flags = flags + }; + + return cfg80211_rx_mgmt_ext(wdev, &info); +} /** * cfg80211_rx_mgmt - notification of received, unprocessed management frame @@ -7570,11 +7891,50 @@ static inline bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm, const u8 *buf, size_t len, u32 flags) { - return cfg80211_rx_mgmt_khz(wdev, MHZ_TO_KHZ(freq), sig_dbm, buf, len, - flags); + struct cfg80211_rx_info info = { + .freq = MHZ_TO_KHZ(freq), + .sig_dbm = sig_dbm, + .buf = buf, + .len = len, + .flags = flags + }; + + return cfg80211_rx_mgmt_ext(wdev, &info); } /** + * struct cfg80211_tx_status - TX status for management frame information + * + * @cookie: Cookie returned by cfg80211_ops::mgmt_tx() + * @tx_tstamp: hardware TX timestamp in nanoseconds + * @ack_tstamp: hardware ack RX timestamp in nanoseconds + * @buf: Management frame (header + body) + * @len: length of the frame data + * @ack: Whether frame was acknowledged + */ +struct cfg80211_tx_status { + u64 cookie; + u64 tx_tstamp; + u64 ack_tstamp; + const u8 *buf; + size_t len; + bool ack; +}; + +/** + * cfg80211_mgmt_tx_status_ext - TX status notification with extended info + * @wdev: wireless device receiving the frame + * @status: TX status data + * @gfp: context flags + * + * This function is called whenever a management frame was requested to be + * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the + * transmission attempt with extended info. + */ +void cfg80211_mgmt_tx_status_ext(struct wireless_dev *wdev, + struct cfg80211_tx_status *status, gfp_t gfp); + +/** * cfg80211_mgmt_tx_status - notification of TX status for management frame * @wdev: wireless device receiving the frame * @cookie: Cookie returned by cfg80211_ops::mgmt_tx() @@ -7587,8 +7947,19 @@ static inline bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the * transmission attempt. */ -void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, - const u8 *buf, size_t len, bool ack, gfp_t gfp); +static inline void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, + u64 cookie, const u8 *buf, + size_t len, bool ack, gfp_t gfp) +{ + struct cfg80211_tx_status status = { + .cookie = cookie, + .buf = buf, + .len = len, + .ack = ack + }; + + cfg80211_mgmt_tx_status_ext(wdev, &status, gfp); +} /** * cfg80211_control_port_tx_status - notification of TX status for control @@ -7882,12 +8253,14 @@ bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy, * cfg80211_ch_switch_notify - update wdev channel and notify userspace * @dev: the device which switched channels * @chandef: the new channel definition + * @link_id: the link ID for MLO, must be 0 for non-MLO * * Caller must acquire wdev_lock, therefore must only be called from sleepable * driver context! */ void cfg80211_ch_switch_notify(struct net_device *dev, - struct cfg80211_chan_def *chandef); + struct cfg80211_chan_def *chandef, + unsigned int link_id); /* * cfg80211_ch_switch_started_notify - notify channel switch start @@ -8369,13 +8742,13 @@ bool cfg80211_iftype_allowed(struct wiphy *wiphy, enum nl80211_iftype iftype, * cfg80211_assoc_comeback - notification of association that was * temporarly rejected with a comeback * @netdev: network device - * @bss: the bss entry with which association is in progress. + * @ap_addr: AP (MLD) address that rejected the assocation * @timeout: timeout interval value TUs. * * this function may sleep. the caller must hold the corresponding wdev's mutex. */ void cfg80211_assoc_comeback(struct net_device *netdev, - struct cfg80211_bss *bss, u32 timeout); + const u8 *ap_addr, u32 timeout); /* Logging, debugging and troubleshooting/diagnostic helpers. */ |