diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 148 |
1 files changed, 128 insertions, 20 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 4ecfb06c413d..cf79656ce09c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -52,7 +52,7 @@ * such wiphy can have zero, one, or many virtual interfaces associated with * it, which need to be identified as such by pointing the network interface's * @ieee80211_ptr pointer to a &struct wireless_dev which further describes - * the wireless part of the interface, normally this struct is embedded in the + * the wireless part of the interface. Normally this struct is embedded in the * network interface's private data area. Drivers can optionally allow creating * or destroying virtual interfaces on the fly, but without at least one or the * ability to create some the wireless device isn't useful. @@ -117,6 +117,11 @@ struct wiphy; * This may be due to the driver or due to regulatory bandwidth * restrictions. * @IEEE80211_CHAN_NO_EHT: EHT operation is not permitted on this channel. + * @IEEE80211_CHAN_DFS_CONCURRENT: See %NL80211_RRF_DFS_CONCURRENT + * @IEEE80211_CHAN_NO_UHB_VLP_CLIENT: Client connection with VLP AP + * not permitted using this channel + * @IEEE80211_CHAN_NO_UHB_AFC_CLIENT: Client connection with AFC AP + * not permitted using this channel */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, @@ -140,6 +145,9 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_16MHZ = 1<<18, IEEE80211_CHAN_NO_320MHZ = 1<<19, IEEE80211_CHAN_NO_EHT = 1<<20, + IEEE80211_CHAN_DFS_CONCURRENT = 1<<21, + IEEE80211_CHAN_NO_UHB_VLP_CLIENT= 1<<22, + IEEE80211_CHAN_NO_UHB_AFC_CLIENT= 1<<23, }; #define IEEE80211_CHAN_NO_HT40 \ @@ -977,6 +985,15 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, const struct cfg80211_chan_def *chandef2); /** + * nl80211_chan_width_to_mhz - get the channel width in MHz + * @chan_width: the channel width from &enum nl80211_chan_width + * + * Return: channel width in MHz if the chan_width from &enum nl80211_chan_width + * is valid. -1 otherwise. + */ +int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width); + +/** * cfg80211_chandef_valid - check if a channel definition is valid * @chandef: the channel definition to check * Return: %true if the channel definition is valid. %false otherwise. @@ -1665,6 +1682,21 @@ struct link_station_del_parameters { }; /** + * struct cfg80211_ttlm_params: TID to link mapping parameters + * + * Used for setting a TID to link mapping. + * + * @dlink: Downlink TID to link mapping, as defined in section 9.4.2.314 + * (TID-To-Link Mapping element) in Draft P802.11be_D4.0. + * @ulink: Uplink TID to link mapping, as defined in section 9.4.2.314 + * (TID-To-Link Mapping element) in Draft P802.11be_D4.0. + */ +struct cfg80211_ttlm_params { + u16 dlink[8]; + u16 ulink[8]; +}; + +/** * struct station_parameters - station parameters * * Used to change and create a new station. @@ -2560,7 +2592,7 @@ struct cfg80211_scan_info { * @short_ssid: short ssid to scan for * @bssid: bssid to scan for * @channel_idx: idx of the channel in the channel array in the scan request - * which the above info relvant to + * which the above info is relevant to * @unsolicited_probe: the AP transmits unsolicited probe response every 20 TU * @short_ssid_valid: @short_ssid is valid and can be used * @psc_no_listen: when set, and the channel is a PSC channel, no need to wait @@ -2608,6 +2640,8 @@ struct cfg80211_scan_6ghz_params { * @n_6ghz_params: number of 6 GHz params * @scan_6ghz_params: 6 GHz params * @bssid: BSSID to scan for (most commonly, the wildcard BSSID) + * @tsf_report_link_id: for MLO, indicates the link ID of the BSS that should be + * used for TSF reporting. Can be set to -1 to indicate no preference. */ struct cfg80211_scan_request { struct cfg80211_ssid *ssids; @@ -2636,6 +2670,7 @@ struct cfg80211_scan_request { bool scan_6ghz; u32 n_6ghz_params; struct cfg80211_scan_6ghz_params *scan_6ghz_params; + s8 tsf_report_link_id; /* keep last */ struct ieee80211_channel *channels[] __counted_by(n_channels); @@ -2816,6 +2851,13 @@ enum cfg80211_signal_type { * the BSS that requested the scan in which the beacon/probe was received. * @chains: bitmask for filled values in @chain_signal. * @chain_signal: per-chain signal strength of last received BSS in dBm. + * @restrict_use: restrict usage, if not set, assume @use_for is + * %NL80211_BSS_USE_FOR_NORMAL. + * @use_for: bitmap of possible usage for this BSS, see + * &enum nl80211_bss_use_for + * @cannot_use_reasons: the reasons (bitmap) for not being able to connect, + * if @restrict_use is set and @use_for is zero (empty); may be 0 for + * unspecified reasons; see &enum nl80211_bss_cannot_use_reasons * @drv_data: Data to be passed through to @inform_bss */ struct cfg80211_inform_bss { @@ -2827,6 +2869,9 @@ struct cfg80211_inform_bss { u8 chains; s8 chain_signal[IEEE80211_MAX_CHAINS]; + u8 restrict_use:1, use_for:7; + u8 cannot_use_reasons; + void *drv_data; }; @@ -2878,6 +2923,11 @@ struct cfg80211_bss_ies { * @chain_signal: per-chain signal strength of last received BSS in dBm. * @bssid_index: index in the multiple BSS set * @max_bssid_indicator: max number of members in the BSS set + * @use_for: bitmap of possible usage for this BSS, see + * &enum nl80211_bss_use_for + * @cannot_use_reasons: the reasons (bitmap) for not being able to connect, + * if @restrict_use is set and @use_for is zero (empty); may be 0 for + * unspecified reasons; see &enum nl80211_bss_cannot_use_reasons * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { @@ -2903,6 +2953,9 @@ struct cfg80211_bss { u8 bssid_index; u8 max_bssid_indicator; + u8 use_for; + u8 cannot_use_reasons; + u8 priv[] __aligned(sizeof(void *)); }; @@ -3180,8 +3233,8 @@ struct cfg80211_ibss_params { * * @behaviour: requested BSS selection behaviour. * @param: parameters for requestion behaviour. - * @band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF. - * @adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST. + * @param.band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF. + * @param.adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST. */ struct cfg80211_bss_selection { enum nl80211_bss_select_attr behaviour; @@ -4493,6 +4546,7 @@ struct mgmt_frame_regs { * @del_link_station: Remove a link of a station. * * @set_hw_timestamp: Enable/disable HW timestamping of TM/FTM frames. + * @set_ttlm: set the TID to link mapping. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -4852,6 +4906,8 @@ struct cfg80211_ops { struct link_station_del_parameters *params); int (*set_hw_timestamp)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_set_hw_timestamp *hwts); + int (*set_ttlm)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ttlm_params *params); }; /* @@ -4910,6 +4966,8 @@ struct cfg80211_ops { * NL80211_REGDOM_SET_BY_DRIVER. * @WIPHY_FLAG_CHANNEL_CHANGE_ON_BEACON: reg_call_notifier() is called if driver * set this flag to update channels on beacon hints. + * @WIPHY_FLAG_SUPPORTS_NSTR_NONPRIMARY: support connection to non-primary link + * of an NSTR mobile AP MLD. */ enum wiphy_flags { WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK = BIT(0), @@ -4923,7 +4981,7 @@ enum wiphy_flags { WIPHY_FLAG_IBSS_RSN = BIT(8), WIPHY_FLAG_MESH_AUTH = BIT(10), WIPHY_FLAG_SUPPORTS_EXT_KCK_32 = BIT(11), - /* use hole at 12 */ + WIPHY_FLAG_SUPPORTS_NSTR_NONPRIMARY = BIT(12), WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), WIPHY_FLAG_AP_UAPSD = BIT(14), WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), @@ -6013,7 +6071,6 @@ void wiphy_delayed_work_flush(struct wiphy *wiphy, * wireless device if it has no netdev * @u: union containing data specific to @iftype * @connected: indicates if connected or not (STA mode) - * @bssid: (private) Used by the internal configuration code * @wext: (private) Used by the internal wireless extensions compat code * @wext.ibss: (private) IBSS data part of wext handling * @wext.connect: (private) connection handling data @@ -6033,8 +6090,6 @@ void wiphy_delayed_work_flush(struct wiphy *wiphy, * @mgmt_registrations: list of registrations for management frames * @mgmt_registrations_need_update: mgmt registrations were updated, * need to propagate the update to the driver - * @beacon_interval: beacon interval used on this device for transmitting - * beacons, 0 when not valid * @address: The address for this device, valid only if @netdev is %NULL * @is_running: true if this is a non-netdev device that has been started, e.g. * the P2P Device. @@ -7116,6 +7171,23 @@ int cfg80211_get_ies_channel_number(const u8 *ie, size_t ielen, enum nl80211_band band); /** + * cfg80211_ssid_eq - compare two SSIDs + * @a: first SSID + * @b: second SSID + * + * Return: %true if SSIDs are equal, %false otherwise. + */ +static inline bool +cfg80211_ssid_eq(struct cfg80211_ssid *a, struct cfg80211_ssid *b) +{ + if (WARN_ON(!a || !b)) + return false; + if (a->ssid_len != b->ssid_len) + return false; + return memcmp(a->ssid, b->ssid, a->ssid_len) ? false : true; +} + +/** * cfg80211_inform_bss_data - inform cfg80211 of a new BSS * * @wiphy: the wiphy reporting the BSS @@ -7162,6 +7234,25 @@ cfg80211_inform_bss(struct wiphy *wiphy, } /** + * __cfg80211_get_bss - get a BSS reference + * @wiphy: the wiphy this BSS struct belongs to + * @channel: the channel to search on (or %NULL) + * @bssid: the desired BSSID (or %NULL) + * @ssid: the desired SSID (or %NULL) + * @ssid_len: length of the SSID (or 0) + * @bss_type: type of BSS, see &enum ieee80211_bss_type + * @privacy: privacy filter, see &enum ieee80211_privacy + * @use_for: indicates which use is intended + */ +struct cfg80211_bss *__cfg80211_get_bss(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *bssid, + const u8 *ssid, size_t ssid_len, + enum ieee80211_bss_type bss_type, + enum ieee80211_privacy privacy, + u32 use_for); + +/** * cfg80211_get_bss - get a BSS reference * @wiphy: the wiphy this BSS struct belongs to * @channel: the channel to search on (or %NULL) @@ -7170,13 +7261,20 @@ cfg80211_inform_bss(struct wiphy *wiphy, * @ssid_len: length of the SSID (or 0) * @bss_type: type of BSS, see &enum ieee80211_bss_type * @privacy: privacy filter, see &enum ieee80211_privacy + * + * This version implies regular usage, %NL80211_BSS_USE_FOR_NORMAL. */ -struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, - struct ieee80211_channel *channel, - const u8 *bssid, - const u8 *ssid, size_t ssid_len, - enum ieee80211_bss_type bss_type, - enum ieee80211_privacy privacy); +static inline struct cfg80211_bss * +cfg80211_get_bss(struct wiphy *wiphy, struct ieee80211_channel *channel, + const u8 *bssid, const u8 *ssid, size_t ssid_len, + enum ieee80211_bss_type bss_type, + enum ieee80211_privacy privacy) +{ + return __cfg80211_get_bss(wiphy, channel, bssid, ssid, ssid_len, + bss_type, privacy, + NL80211_BSS_USE_FOR_NORMAL); +} + static inline struct cfg80211_bss * cfg80211_get_ibss(struct wiphy *wiphy, struct ieee80211_channel *channel, @@ -7270,8 +7368,6 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); /** * struct cfg80211_rx_assoc_resp_data - association response data - * @bss: the BSS that association was requested with, ownership of the pointer - * moves to cfg80211 in the call to cfg80211_rx_assoc_resp() * @buf: (Re)Association Response frame (header + body) * @len: length of the frame data * @uapsd_queues: bitmap of queues configured for uapsd. Same format @@ -7281,6 +7377,8 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); * @ap_mld_addr: AP MLD address (in case of MLO) * @links: per-link information indexed by link ID, use links[0] for * non-MLO connections + * @links.bss: the BSS that association was requested with, ownership of the + * pointer moves to cfg80211 in the call to cfg80211_rx_assoc_resp() * @links.status: Set this (along with a BSS pointer) for links that * were rejected by the AP. */ @@ -7309,7 +7407,7 @@ struct cfg80211_rx_assoc_resp_data { * This function may sleep. The caller must hold the corresponding wdev's mutex. */ void cfg80211_rx_assoc_resp(struct net_device *dev, - struct cfg80211_rx_assoc_resp_data *data); + const struct cfg80211_rx_assoc_resp_data *data); /** * struct cfg80211_assoc_failure - association failure data @@ -7428,7 +7526,7 @@ void cfg80211_notify_new_peer_candidate(struct net_device *dev, * RFkill integration in cfg80211 is almost invisible to drivers, * as cfg80211 automatically registers an rfkill instance for each * wireless device it knows about. Soft kill is also translated - * into disconnecting and turning all interfaces off, drivers are + * into disconnecting and turning all interfaces off. Drivers are * expected to turn off the device when all interfaces are down. * * However, devices may have a hard RFkill line, in which case they @@ -7476,7 +7574,7 @@ static inline void wiphy_rfkill_stop_polling(struct wiphy *wiphy) * the configuration mechanism. * * A driver supporting vendor commands must register them as an array - * in struct wiphy, with handlers for each one, each command has an + * in struct wiphy, with handlers for each one. Each command has an * OUI and sub command ID to identify it. * * Note that this feature should not be (ab)used to implement protocol @@ -7640,7 +7738,7 @@ static inline void cfg80211_vendor_event(struct sk_buff *skb, gfp_t gfp) * interact with driver-specific tools to aid, for instance, * factory programming. * - * This chapter describes how drivers interact with it, for more + * This chapter describes how drivers interact with it. For more * information see the nl80211 book's chapter on it. */ @@ -9299,6 +9397,16 @@ bool cfg80211_valid_disable_subchannel_bitmap(u16 *bitmap, */ void cfg80211_links_removed(struct net_device *dev, u16 link_mask); +/** + * cfg80211_schedule_channels_check - schedule regulatory check if needed + * @wdev: the wireless device to check + * + * In case the device supports NO_IR or DFS relaxations, schedule regulatory + * channels check, as previous concurrent operation conditions may not + * hold anymore. + */ +void cfg80211_schedule_channels_check(struct wireless_dev *wdev); + #ifdef CONFIG_CFG80211_DEBUGFS /** * wiphy_locked_debugfs_read - do a locked read in debugfs |