diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 297 |
1 files changed, 235 insertions, 62 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ead1aa6d003e..6e90f1a4950f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -363,6 +363,8 @@ static inline void wiphy_read_of_freq_limits(struct wiphy *wiphy) /** * struct vif_params - describes virtual interface parameters + * @flags: monitor interface flags, unchanged if 0, otherwise + * %MONITOR_FLAG_CHANGED will be set * @use_4addr: use 4-address frames * @macaddr: address to use for this virtual interface. * If this parameter is set to zero address the driver may @@ -370,13 +372,17 @@ static inline void wiphy_read_of_freq_limits(struct wiphy *wiphy) * This feature is only fully supported by drivers that enable the * %NL80211_FEATURE_MAC_ON_CREATE flag. Others may support creating ** only p2p devices with specified MAC. - * @vht_mumimo_groups: MU-MIMO groupID. used for monitoring only - * packets belonging to that MU-MIMO groupID. + * @vht_mumimo_groups: MU-MIMO groupID, used for monitoring MU-MIMO packets + * belonging to that MU-MIMO groupID; %NULL if not changed + * @vht_mumimo_follow_addr: MU-MIMO follow address, used for monitoring + * MU-MIMO packets going to the specified station; %NULL if not changed */ struct vif_params { + u32 flags; int use_4addr; u8 macaddr[ETH_ALEN]; - u8 vht_mumimo_groups[VHT_MUMIMO_GROUPS_DATA_LEN]; + const u8 *vht_mumimo_groups; + const u8 *vht_mumimo_follow_addr; }; /** @@ -1211,6 +1217,7 @@ static inline int cfg80211_get_station(struct net_device *dev, * Monitor interface configuration flags. Note that these must be the bits * according to the nl80211 flags. * + * @MONITOR_FLAG_CHANGED: set if the flags were changed * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP * @MONITOR_FLAG_CONTROL: pass control frames @@ -1219,6 +1226,7 @@ static inline int cfg80211_get_station(struct net_device *dev, * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address */ enum monitor_flags { + MONITOR_FLAG_CHANGED = 1<<__NL80211_MNTR_FLAG_INVALID, MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL, MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL, MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL, @@ -1605,11 +1613,15 @@ static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask) /** * struct cfg80211_match_set - sets of attributes to match * - * @ssid: SSID to be matched; may be zero-length for no match (RSSI only) + * @ssid: SSID to be matched; may be zero-length in case of BSSID match + * or no match (RSSI only) + * @bssid: BSSID to be matched; may be all-zero BSSID in case of SSID match + * or no match (RSSI only) * @rssi_thold: don't report scan results below this threshold (in s32 dBm) */ struct cfg80211_match_set { struct cfg80211_ssid ssid; + u8 bssid[ETH_ALEN]; s32 rssi_thold; }; @@ -1641,6 +1653,7 @@ struct cfg80211_bss_select_adjust { /** * struct cfg80211_sched_scan_request - scheduled scan request description * + * @reqid: identifies this request. * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans) * @n_ssids: number of SSIDs * @n_channels: total number of channels to scan @@ -1653,6 +1666,7 @@ struct cfg80211_bss_select_adjust { * (others are filtered out). * If ommited, all results are passed. * @n_match_sets: number of match sets + * @results_wk: worker for processing results notification. * @wiphy: the wiphy this was for * @dev: the interface * @scan_start: start time of the scheduled scan @@ -1669,6 +1683,8 @@ struct cfg80211_bss_select_adjust { * @rcu_head: RCU callback used to free the struct * @owner_nlportid: netlink portid of owner (if this should is a request * owned by a particular socket) + * @nl_owner_dead: netlink owner socket was closed - this request be freed + * @list: for keeping list of requests. * @delay: delay in seconds to use before starting the first scan * cycle. The driver may ignore this parameter and start * immediately (or at any other time), if this feature is not @@ -1685,6 +1701,7 @@ struct cfg80211_bss_select_adjust { * comparisions. */ struct cfg80211_sched_scan_request { + u64 reqid; struct cfg80211_ssid *ssids; int n_ssids; u32 n_channels; @@ -1710,8 +1727,11 @@ struct cfg80211_sched_scan_request { struct wiphy *wiphy; struct net_device *dev; unsigned long scan_start; + bool report_results; struct rcu_head rcu_head; u32 owner_nlportid; + bool nl_owner_dead; + struct list_head list; /* keep last */ struct ieee80211_channel *channels[0]; @@ -2073,6 +2093,19 @@ struct cfg80211_bss_selection { * the BSSID of the current association, i.e., to the value that is * included in the Current AP address field of the Reassociation Request * frame. + * @fils_erp_username: EAP re-authentication protocol (ERP) username part of the + * NAI or %NULL if not specified. This is used to construct FILS wrapped + * data IE. + * @fils_erp_username_len: Length of @fils_erp_username in octets. + * @fils_erp_realm: EAP re-authentication protocol (ERP) realm part of NAI or + * %NULL if not specified. This specifies the domain name of ER server and + * is used to construct FILS wrapped data IE. + * @fils_erp_realm_len: Length of @fils_erp_realm in octets. + * @fils_erp_next_seq_num: The next sequence number to use in the FILS ERP + * messages. This is also used to construct FILS wrapped data IE. + * @fils_erp_rrk: ERP re-authentication Root Key (rRK) used to derive additional + * keys in FILS or %NULL if not specified. + * @fils_erp_rrk_len: Length of @fils_erp_rrk in octets. */ struct cfg80211_connect_params { struct ieee80211_channel *channel; @@ -2098,6 +2131,13 @@ struct cfg80211_connect_params { bool pbss; struct cfg80211_bss_selection bss_select; const u8 *prev_bssid; + const u8 *fils_erp_username; + size_t fils_erp_username_len; + const u8 *fils_erp_realm; + size_t fils_erp_realm_len; + u16 fils_erp_next_seq_num; + const u8 *fils_erp_rrk; + size_t fils_erp_rrk_len; }; /** @@ -2136,12 +2176,27 @@ enum wiphy_params_flags { * This structure is passed to the set/del_pmksa() method for PMKSA * caching. * - * @bssid: The AP's BSSID. - * @pmkid: The PMK material itself. + * @bssid: The AP's BSSID (may be %NULL). + * @pmkid: The identifier to refer a PMKSA. + * @pmk: The PMK for the PMKSA identified by @pmkid. This is used for key + * derivation by a FILS STA. Otherwise, %NULL. + * @pmk_len: Length of the @pmk. The length of @pmk can differ depending on + * the hash algorithm used to generate this. + * @ssid: SSID to specify the ESS within which a PMKSA is valid when using FILS + * cache identifier (may be %NULL). + * @ssid_len: Length of the @ssid in octets. + * @cache_id: 2-octet cache identifier advertized by a FILS AP identifying the + * scope of PMKSA. This is valid only if @ssid_len is non-zero (may be + * %NULL). */ struct cfg80211_pmksa { const u8 *bssid; const u8 *pmkid; + const u8 *pmk; + size_t pmk_len; + const u8 *ssid; + size_t ssid_len; + const u8 *cache_id; }; /** @@ -2633,8 +2688,7 @@ struct cfg80211_nan_func { * indication of requesting reassociation. * In both the driver-initiated and new connect() call initiated roaming * cases, the result of roaming is indicated with a call to - * cfg80211_roamed() or cfg80211_roamed_bss(). - * (invoked with the wireless_dev mutex held) + * cfg80211_roamed(). (invoked with the wireless_dev mutex held) * @update_connect_params: Update the connect parameters while connected to a * BSS. The updated parameters can be used by driver/firmware for * subsequent BSS selection (roaming) decisions and to form the @@ -2712,15 +2766,20 @@ struct cfg80211_nan_func { * the current level is above/below the configured threshold; this may * need some care when the configuration is changed (without first being * disabled.) + * @set_cqm_rssi_range_config: Configure two RSSI thresholds in the + * connection quality monitor. An event is to be sent only when the + * signal level is found to be outside the two values. The driver should + * set %NL80211_EXT_FEATURE_CQM_RSSI_LIST if this method is implemented. + * If it is provided then there's no point providing @set_cqm_rssi_config. * @set_cqm_txe_config: Configure connection quality monitor TX error * thresholds. * @sched_scan_start: Tell the driver to start a scheduled scan. - * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. This - * call must stop the scheduled scan and be ready for starting a new one - * before it returns, i.e. @sched_scan_start may be called immediately - * after that again and should not fail in that case. The driver should - * not call cfg80211_sched_scan_stopped() for a requested stop (when this - * method returns 0.) + * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan with + * given request id. This call must stop the scheduled scan and be ready + * for starting a new one before it returns, i.e. @sched_scan_start may be + * called immediately after that again and should not fail in that case. + * The driver should not call cfg80211_sched_scan_stopped() for a requested + * stop (when this method returns 0). * * @mgmt_frame_register: Notify driver that a management frame type was * registered. The callback is allowed to sleep. @@ -2826,13 +2885,12 @@ struct cfg80211_ops { const char *name, unsigned char name_assign_type, enum nl80211_iftype type, - u32 *flags, struct vif_params *params); int (*del_virtual_intf)(struct wiphy *wiphy, struct wireless_dev *wdev); int (*change_virtual_intf)(struct wiphy *wiphy, struct net_device *dev, - enum nl80211_iftype type, u32 *flags, + enum nl80211_iftype type, struct vif_params *params); int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, @@ -3001,6 +3059,10 @@ struct cfg80211_ops { struct net_device *dev, s32 rssi_thold, u32 rssi_hyst); + int (*set_cqm_rssi_range_config)(struct wiphy *wiphy, + struct net_device *dev, + s32 rssi_low, s32 rssi_high); + int (*set_cqm_txe_config)(struct wiphy *wiphy, struct net_device *dev, u32 rate, u32 pkts, u32 intvl); @@ -3015,7 +3077,8 @@ struct cfg80211_ops { int (*sched_scan_start)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_sched_scan_request *request); - int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev); + int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev, + u64 reqid); int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_gtk_rekey_data *data); @@ -3160,7 +3223,7 @@ enum wiphy_flags { WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), WIPHY_FLAG_IBSS_RSN = BIT(8), WIPHY_FLAG_MESH_AUTH = BIT(10), - WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11), + /* use hole at 11 */ /* use hole at 12 */ WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), WIPHY_FLAG_AP_UAPSD = BIT(14), @@ -3498,6 +3561,8 @@ struct wiphy_iftype_ext_capab { * this variable determines its size * @max_scan_ssids: maximum number of SSIDs the device can scan for in * any given scan + * @max_sched_scan_reqs: maximum number of scheduled scan requests that + * the device can run concurrently. * @max_sched_scan_ssids: maximum number of SSIDs the device can scan * for in any given scheduled scan * @max_match_sets: maximum number of match sets the device can handle @@ -3634,6 +3699,7 @@ struct wiphy { int bss_priv_size; u8 max_scan_ssids; + u8 max_sched_scan_reqs; u8 max_sched_scan_ssids; u8 max_match_sets; u16 max_scan_ie_len; @@ -3871,6 +3937,7 @@ void wiphy_free(struct wiphy *wiphy); struct cfg80211_conn; struct cfg80211_internal_bss; struct cfg80211_cached_keys; +struct cfg80211_cqm_config; /** * struct wireless_dev - wireless device state @@ -3934,6 +4001,8 @@ struct cfg80211_cached_keys; * @event_list: (private) list for internal event processing * @event_lock: (private) lock for event list * @owner_nlportid: (private) owner socket port ID + * @nl_owner_dead: (private) owner socket went away + * @cqm_config: (private) nl80211 RSSI monitor state */ struct wireless_dev { struct wiphy *wiphy; @@ -3982,12 +4051,13 @@ struct wireless_dev { u32 ap_unexpected_nlportid; + u32 owner_nlportid; + bool nl_owner_dead; + bool cac_started; unsigned long cac_start_time; unsigned int cac_time_ms; - u32 owner_nlportid; - #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { @@ -4002,6 +4072,8 @@ struct wireless_dev { bool prev_bssid_valid; } wext; #endif + + struct cfg80211_cqm_config *cqm_config; }; static inline u8 *wdev_address(struct wireless_dev *wdev) @@ -4494,31 +4566,34 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, * cfg80211_sched_scan_results - notify that new scan results are available * * @wiphy: the wiphy which got scheduled scan results + * @reqid: identifier for the related scheduled scan request */ -void cfg80211_sched_scan_results(struct wiphy *wiphy); +void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid); /** * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped * * @wiphy: the wiphy on which the scheduled scan stopped + * @reqid: identifier for the related scheduled scan request * * The driver can call this function to inform cfg80211 that the * scheduled scan had to be stopped, for whatever reason. The driver * is then called back via the sched_scan_stop operation when done. */ -void cfg80211_sched_scan_stopped(struct wiphy *wiphy); +void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid); /** * cfg80211_sched_scan_stopped_rtnl - notify that the scheduled scan has stopped * * @wiphy: the wiphy on which the scheduled scan stopped + * @reqid: identifier for the related scheduled scan request * * The driver can call this function to inform cfg80211 that the * scheduled scan had to be stopped, for whatever reason. The driver * is then called back via the sched_scan_stop operation when done. * This function should be called with rtnl locked. */ -void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy); +void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy, u64 reqid); /** * cfg80211_inform_bss_frame_data - inform cfg80211 of a received BSS frame @@ -4651,12 +4726,22 @@ cfg80211_inform_bss(struct wiphy *wiphy, gfp); } +/** + * cfg80211_get_bss - get a BSS reference + * @wiphy: the wiphy this BSS struct belongs to + * @channel: the channel to search on (or %NULL) + * @bssid: the desired BSSID (or %NULL) + * @ssid: the desired SSID (or %NULL) + * @ssid_len: length of the SSID (or 0) + * @bss_type: type of BSS, see &enum ieee80211_bss_type + * @privacy: privacy filter, see &enum ieee80211_privacy + */ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, struct ieee80211_channel *channel, const u8 *bssid, const u8 *ssid, size_t ssid_len, enum ieee80211_bss_type bss_type, - enum ieee80211_privacy); + enum ieee80211_privacy privacy); static inline struct cfg80211_bss * cfg80211_get_ibss(struct wiphy *wiphy, struct ieee80211_channel *channel, @@ -5123,6 +5208,78 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp) #endif /** + * struct cfg80211_connect_resp_params - Connection response params + * @status: Status code, %WLAN_STATUS_SUCCESS for successful connection, use + * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you + * the real status code for failures. If this call is used to report a + * failure due to a timeout (e.g., not receiving an Authentication frame + * from the AP) instead of an explicit rejection by the AP, -1 is used to + * indicate that this is a failure, but without a status code. + * @timeout_reason is used to report the reason for the timeout in that + * case. + * @bssid: The BSSID of the AP (may be %NULL) + * @bss: Entry of bss to which STA got connected to, can be obtained through + * cfg80211_get_bss() (may be %NULL). Only one parameter among @bssid and + * @bss needs to be specified. + * @req_ie: Association request IEs (may be %NULL) + * @req_ie_len: Association request IEs length + * @resp_ie: Association response IEs (may be %NULL) + * @resp_ie_len: Association response IEs length + * @fils_kek: KEK derived from a successful FILS connection (may be %NULL) + * @fils_kek_len: Length of @fils_kek in octets + * @update_erp_next_seq_num: Boolean value to specify whether the value in + * @fils_erp_next_seq_num is valid. + * @fils_erp_next_seq_num: The next sequence number to use in ERP message in + * FILS Authentication. This value should be specified irrespective of the + * status for a FILS connection. + * @pmk: A new PMK if derived from a successful FILS connection (may be %NULL). + * @pmk_len: Length of @pmk in octets + * @pmkid: A new PMKID if derived from a successful FILS connection or the PMKID + * used for this FILS connection (may be %NULL). + * @timeout_reason: Reason for connection timeout. This is used when the + * connection fails due to a timeout instead of an explicit rejection from + * the AP. %NL80211_TIMEOUT_UNSPECIFIED is used when the timeout reason is + * not known. This value is used only if @status < 0 to indicate that the + * failure is due to a timeout and not due to explicit rejection by the AP. + * This value is ignored in other cases (@status >= 0). + */ +struct cfg80211_connect_resp_params { + int status; + const u8 *bssid; + struct cfg80211_bss *bss; + const u8 *req_ie; + size_t req_ie_len; + const u8 *resp_ie; + size_t resp_ie_len; + const u8 *fils_kek; + size_t fils_kek_len; + bool update_erp_next_seq_num; + u16 fils_erp_next_seq_num; + const u8 *pmk; + size_t pmk_len; + const u8 *pmkid; + enum nl80211_timeout_reason timeout_reason; +}; + +/** + * cfg80211_connect_done - notify cfg80211 of connection result + * + * @dev: network device + * @params: connection response parameters + * @gfp: allocation flags + * + * It should be called by the underlying driver once execution of the connection + * request from connect() has been completed. This is similar to + * cfg80211_connect_bss(), but takes a structure pointer for connection response + * parameters. Only one of the functions among cfg80211_connect_bss(), + * cfg80211_connect_result(), cfg80211_connect_timeout(), + * and cfg80211_connect_done() should be called. + */ +void cfg80211_connect_done(struct net_device *dev, + struct cfg80211_connect_resp_params *params, + gfp_t gfp); + +/** * cfg80211_connect_bss - notify cfg80211 of connection result * * @dev: network device @@ -5152,13 +5309,31 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp) * It should be called by the underlying driver once execution of the connection * request from connect() has been completed. This is similar to * cfg80211_connect_result(), but with the option of identifying the exact bss - * entry for the connection. Only one of these functions should be called. + * entry for the connection. Only one of the functions among + * cfg80211_connect_bss(), cfg80211_connect_result(), + * cfg80211_connect_timeout(), and cfg80211_connect_done() should be called. */ -void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid, - struct cfg80211_bss *bss, const u8 *req_ie, - size_t req_ie_len, const u8 *resp_ie, - size_t resp_ie_len, int status, gfp_t gfp, - enum nl80211_timeout_reason timeout_reason); +static inline void +cfg80211_connect_bss(struct net_device *dev, const u8 *bssid, + struct cfg80211_bss *bss, const u8 *req_ie, + size_t req_ie_len, const u8 *resp_ie, + size_t resp_ie_len, int status, gfp_t gfp, + enum nl80211_timeout_reason timeout_reason) +{ + struct cfg80211_connect_resp_params params; + + memset(¶ms, 0, sizeof(params)); + params.status = status; + params.bssid = bssid; + params.bss = bss; + params.req_ie = req_ie; + params.req_ie_len = req_ie_len; + params.resp_ie = resp_ie; + params.resp_ie_len = resp_ie_len; + params.timeout_reason = timeout_reason; + + cfg80211_connect_done(dev, ¶ms, gfp); +} /** * cfg80211_connect_result - notify cfg80211 of connection result @@ -5177,7 +5352,8 @@ void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid, * It should be called by the underlying driver once execution of the connection * request from connect() has been completed. This is similar to * cfg80211_connect_bss() which allows the exact bss entry to be specified. Only - * one of these functions should be called. + * one of the functions among cfg80211_connect_bss(), cfg80211_connect_result(), + * cfg80211_connect_timeout(), and cfg80211_connect_done() should be called. */ static inline void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, @@ -5204,7 +5380,9 @@ cfg80211_connect_result(struct net_device *dev, const u8 *bssid, * in a sequence where no explicit authentication/association rejection was * received from the AP. This could happen, e.g., due to not being able to send * out the Authentication or Association Request frame or timing out while - * waiting for the response. + * waiting for the response. Only one of the functions among + * cfg80211_connect_bss(), cfg80211_connect_result(), + * cfg80211_connect_timeout(), and cfg80211_connect_done() should be called. */ static inline void cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid, @@ -5216,51 +5394,46 @@ cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid, } /** - * cfg80211_roamed - notify cfg80211 of roaming + * struct cfg80211_roam_info - driver initiated roaming information * - * @dev: network device * @channel: the channel of the new AP - * @bssid: the BSSID of the new AP + * @bss: entry of bss to which STA got roamed (may be %NULL if %bssid is set) + * @bssid: the BSSID of the new AP (may be %NULL if %bss is set) * @req_ie: association request IEs (maybe be %NULL) * @req_ie_len: association request IEs length * @resp_ie: association response IEs (may be %NULL) * @resp_ie_len: assoc response IEs length - * @gfp: allocation flags - * - * It should be called by the underlying driver whenever it roamed - * from one AP to another while connected. */ -void cfg80211_roamed(struct net_device *dev, - struct ieee80211_channel *channel, - const u8 *bssid, - const u8 *req_ie, size_t req_ie_len, - const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); +struct cfg80211_roam_info { + struct ieee80211_channel *channel; + struct cfg80211_bss *bss; + const u8 *bssid; + const u8 *req_ie; + size_t req_ie_len; + const u8 *resp_ie; + size_t resp_ie_len; +}; /** - * cfg80211_roamed_bss - notify cfg80211 of roaming + * cfg80211_roamed - notify cfg80211 of roaming * * @dev: network device - * @bss: entry of bss to which STA got roamed - * @req_ie: association request IEs (maybe be %NULL) - * @req_ie_len: association request IEs length - * @resp_ie: association response IEs (may be %NULL) - * @resp_ie_len: assoc response IEs length + * @info: information about the new BSS. struct &cfg80211_roam_info. * @gfp: allocation flags * - * This is just a wrapper to notify cfg80211 of roaming event with driver - * passing bss to avoid a race in timeout of the bss entry. It should be - * called by the underlying driver whenever it roamed from one AP to another - * while connected. Drivers which have roaming implemented in firmware - * may use this function to avoid a race in bss entry timeout where the bss - * entry of the new AP is seen in the driver, but gets timed out by the time - * it is accessed in __cfg80211_roamed() due to delay in scheduling + * This function may be called with the driver passing either the BSSID of the + * new AP or passing the bss entry to avoid a race in timeout of the bss entry. + * It should be called by the underlying driver whenever it roamed from one AP + * to another while connected. Drivers which have roaming implemented in + * firmware should pass the bss entry to avoid a race in bss entry timeout where + * the bss entry of the new AP is seen in the driver, but gets timed out by the + * time it is accessed in __cfg80211_roamed() due to delay in scheduling * rdev->event_work. In case of any failures, the reference is released - * either in cfg80211_roamed_bss() or in __cfg80211_romed(), Otherwise, - * it will be released while diconneting from the current bss. + * either in cfg80211_roamed() or in __cfg80211_romed(), Otherwise, it will be + * released while diconneting from the current bss. */ -void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss, - const u8 *req_ie, size_t req_ie_len, - const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); +void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info, + gfp_t gfp); /** * cfg80211_disconnected - notify cfg80211 that connection was dropped |