summaryrefslogtreecommitdiff
path: root/include/net/cfg80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/cfg80211.h')
-rw-r--r--include/net/cfg80211.h241
1 files changed, 203 insertions, 38 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a2ddcf2398fd..4ebb816241fa 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -319,9 +319,12 @@ struct ieee80211_supported_band {
/**
* struct vif_params - describes virtual interface parameters
* @use_4addr: use 4-address frames
- * @macaddr: address to use for this virtual interface. This will only
- * be used for non-netdevice interfaces. If this parameter is set
- * to zero address the driver may determine the address as needed.
+ * @macaddr: address to use for this virtual interface.
+ * If this parameter is set to zero address the driver may
+ * determine the address as needed.
+ * This feature is only fully supported by drivers that enable the
+ * %NL80211_FEATURE_MAC_ON_CREATE flag. Others may support creating
+ ** only p2p devices with specified MAC.
*/
struct vif_params {
int use_4addr;
@@ -799,6 +802,22 @@ struct station_parameters {
};
/**
+ * struct station_del_parameters - station deletion parameters
+ *
+ * Used to delete a station entry (or all stations).
+ *
+ * @mac: MAC address of the station to remove or NULL to remove all stations
+ * @subtype: Management frame subtype to use for indicating removal
+ * (10 = Disassociation, 12 = Deauthentication)
+ * @reason_code: Reason code for the Disassociation/Deauthentication frame
+ */
+struct station_del_parameters {
+ const u8 *mac;
+ u8 subtype;
+ u16 reason_code;
+};
+
+/**
* enum cfg80211_station_type - the type of station being modified
* @CFG80211_STA_AP_CLIENT: client of an AP interface
* @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has
@@ -1340,6 +1359,16 @@ struct mesh_setup {
};
/**
+ * struct ocb_setup - 802.11p OCB mode setup configuration
+ * @chandef: defines the channel to use
+ *
+ * These parameters are fixed when connecting to the network
+ */
+struct ocb_setup {
+ struct cfg80211_chan_def chandef;
+};
+
+/**
* struct ieee80211_txq_params - TX queue parameters
* @ac: AC identifier
* @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
@@ -1408,6 +1437,10 @@ struct cfg80211_ssid {
* @aborted: (internal) scan request was notified as aborted
* @notified: (internal) scan request was notified as done or aborted
* @no_cck: used to send probe requests at non CCK rate in 2GHz band
+ * @mac_addr: MAC address used with randomisation
+ * @mac_addr_mask: MAC address mask used with randomisation, bits that
+ * are 0 in the mask should be randomised, bits that are 1 should
+ * be taken from the @mac_addr
*/
struct cfg80211_scan_request {
struct cfg80211_ssid *ssids;
@@ -1422,6 +1455,9 @@ struct cfg80211_scan_request {
struct wireless_dev *wdev;
+ u8 mac_addr[ETH_ALEN] __aligned(2);
+ u8 mac_addr_mask[ETH_ALEN] __aligned(2);
+
/* internal */
struct wiphy *wiphy;
unsigned long scan_start;
@@ -1432,6 +1468,17 @@ struct cfg80211_scan_request {
struct ieee80211_channel *channels[0];
};
+static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask)
+{
+ int i;
+
+ get_random_bytes(buf, ETH_ALEN);
+ for (i = 0; i < ETH_ALEN; i++) {
+ buf[i] &= ~mask[i];
+ buf[i] |= addr[i] & mask[i];
+ }
+}
+
/**
* struct cfg80211_match_set - sets of attributes to match
*
@@ -1465,6 +1512,10 @@ struct cfg80211_match_set {
* @channels: channels to scan
* @min_rssi_thold: for drivers only supporting a single threshold, this
* contains the minimum over all matchsets
+ * @mac_addr: MAC address used with randomisation
+ * @mac_addr_mask: MAC address mask used with randomisation, bits that
+ * are 0 in the mask should be randomised, bits that are 1 should
+ * be taken from the @mac_addr
*/
struct cfg80211_sched_scan_request {
struct cfg80211_ssid *ssids;
@@ -1479,6 +1530,9 @@ struct cfg80211_sched_scan_request {
int n_match_sets;
s32 min_rssi_thold;
+ u8 mac_addr[ETH_ALEN] __aligned(2);
+ u8 mac_addr_mask[ETH_ALEN] __aligned(2);
+
/* internal */
struct wiphy *wiphy;
struct net_device *dev;
@@ -1911,6 +1965,7 @@ struct cfg80211_wowlan_tcp {
* @rfkill_release: wake up when rfkill is released
* @tcp: TCP connection establishment/wakeup parameters, see nl80211.h.
* NULL if not configured.
+ * @nd_config: configuration for the scan to be used for net detect wake.
*/
struct cfg80211_wowlan {
bool any, disconnect, magic_pkt, gtk_rekey_failure,
@@ -1919,6 +1974,7 @@ struct cfg80211_wowlan {
struct cfg80211_pkt_pattern *patterns;
struct cfg80211_wowlan_tcp *tcp;
int n_patterns;
+ struct cfg80211_sched_scan_request *nd_config;
};
/**
@@ -1951,6 +2007,35 @@ struct cfg80211_coalesce {
};
/**
+ * struct cfg80211_wowlan_nd_match - information about the match
+ *
+ * @ssid: SSID of the match that triggered the wake up
+ * @n_channels: Number of channels where the match occurred. This
+ * value may be zero if the driver can't report the channels.
+ * @channels: center frequencies of the channels where a match
+ * occurred (in MHz)
+ */
+struct cfg80211_wowlan_nd_match {
+ struct cfg80211_ssid ssid;
+ int n_channels;
+ u32 channels[];
+};
+
+/**
+ * struct cfg80211_wowlan_nd_info - net detect wake up information
+ *
+ * @n_matches: Number of match information instances provided in
+ * @matches. This value may be zero if the driver can't provide
+ * match information.
+ * @matches: Array of pointers to matches containing information about
+ * the matches that triggered the wake up.
+ */
+struct cfg80211_wowlan_nd_info {
+ int n_matches;
+ struct cfg80211_wowlan_nd_match *matches[];
+};
+
+/**
* struct cfg80211_wowlan_wakeup - wakeup report
* @disconnect: woke up by getting disconnected
* @magic_pkt: woke up by receiving magic packet
@@ -1969,6 +2054,7 @@ struct cfg80211_coalesce {
* @tcp_match: TCP wakeup packet received
* @tcp_connlost: TCP connection lost or failed to establish
* @tcp_nomoretokens: TCP data ran out of tokens
+ * @net_detect: if not %NULL, woke up because of net detect
*/
struct cfg80211_wowlan_wakeup {
bool disconnect, magic_pkt, gtk_rekey_failure,
@@ -1978,6 +2064,7 @@ struct cfg80211_wowlan_wakeup {
s32 pattern_idx;
u32 packet_present_len, packet_len;
const void *packet;
+ struct cfg80211_wowlan_nd_info *net_detect;
};
/**
@@ -2132,7 +2219,7 @@ struct cfg80211_qos_map {
* @stop_ap: Stop being an AP, including stopping beaconing.
*
* @add_station: Add a new station.
- * @del_station: Remove a station; @mac may be NULL to remove all stations.
+ * @del_station: Remove a station
* @change_station: Modify a given station. Note that flags changes are not much
* validated in cfg80211, in particular the auth/assoc/authorized flags
* might come to the driver in invalid combinations -- make sure to check
@@ -2146,6 +2233,8 @@ struct cfg80211_qos_map {
* @change_mpath: change a given mesh path
* @get_mpath: get a mesh path for the given parameters
* @dump_mpath: dump mesh path callback -- resume dump at index @idx
+ * @get_mpp: get a mesh proxy path for the given parameters
+ * @dump_mpp: dump mesh proxy path callback -- resume dump at index @idx
* @join_mesh: join the mesh network with the specified parameters
* (invoked with the wireless_dev mutex held)
* @leave_mesh: leave the current mesh network
@@ -2331,6 +2420,17 @@ struct cfg80211_qos_map {
* with the peer followed by immediate teardown when the addition is later
* rejected)
* @del_tx_ts: remove an existing TX TS
+ *
+ * @join_ocb: join the OCB network with the specified parameters
+ * (invoked with the wireless_dev mutex held)
+ * @leave_ocb: leave the current OCB network
+ * (invoked with the wireless_dev mutex held)
+ *
+ * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver
+ * is responsible for continually initiating channel-switching operations
+ * and returning to the base channel for communication with the AP.
+ * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both
+ * peers must be on the base channel when the call completes.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2376,7 +2476,7 @@ struct cfg80211_ops {
const u8 *mac,
struct station_parameters *params);
int (*del_station)(struct wiphy *wiphy, struct net_device *dev,
- const u8 *mac);
+ struct station_del_parameters *params);
int (*change_station)(struct wiphy *wiphy, struct net_device *dev,
const u8 *mac,
struct station_parameters *params);
@@ -2396,6 +2496,11 @@ struct cfg80211_ops {
int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *dst, u8 *next_hop,
struct mpath_info *pinfo);
+ int (*get_mpp)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *dst, u8 *mpp, struct mpath_info *pinfo);
+ int (*dump_mpp)(struct wiphy *wiphy, struct net_device *dev,
+ int idx, u8 *dst, u8 *mpp,
+ struct mpath_info *pinfo);
int (*get_mesh_config)(struct wiphy *wiphy,
struct net_device *dev,
struct mesh_config *conf);
@@ -2407,6 +2512,10 @@ struct cfg80211_ops {
const struct mesh_setup *setup);
int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
+ int (*join_ocb)(struct wiphy *wiphy, struct net_device *dev,
+ struct ocb_setup *setup);
+ int (*leave_ocb)(struct wiphy *wiphy, struct net_device *dev);
+
int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
struct bss_parameters *params);
@@ -2577,6 +2686,14 @@ struct cfg80211_ops {
u16 admitted_time);
int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev,
u8 tsid, const u8 *peer);
+
+ int (*tdls_channel_switch)(struct wiphy *wiphy,
+ struct net_device *dev,
+ const u8 *addr, u8 oper_class,
+ struct cfg80211_chan_def *chandef);
+ void (*tdls_cancel_channel_switch)(struct wiphy *wiphy,
+ struct net_device *dev,
+ const u8 *addr);
};
/*
@@ -2623,13 +2740,9 @@ struct cfg80211_ops {
* @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
* @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in
* beaconing mode (AP, IBSS, Mesh, ...).
- * @WIPHY_FLAG_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
- * TSPEC sessions (TID aka TSID 0-7) with the NL80211_CMD_ADD_TX_TS
- * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
- * needs to be able to handle Block-Ack agreements and other things.
*/
enum wiphy_flags {
- WIPHY_FLAG_SUPPORTS_WMM_ADMISSION = BIT(0),
+ /* use hole at 0 */
/* use hole at 1 */
/* use hole at 2 */
WIPHY_FLAG_NETNS_OK = BIT(3),
@@ -2755,6 +2868,7 @@ struct ieee80211_txrx_stypes {
* @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request
* @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure
* @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release
+ * @WIPHY_WOWLAN_NET_DETECT: supports wakeup on network detection
*/
enum wiphy_wowlan_support_flags {
WIPHY_WOWLAN_ANY = BIT(0),
@@ -2765,6 +2879,7 @@ enum wiphy_wowlan_support_flags {
WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5),
WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6),
WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7),
+ WIPHY_WOWLAN_NET_DETECT = BIT(8),
};
struct wiphy_wowlan_tcp_support {
@@ -2783,6 +2898,11 @@ struct wiphy_wowlan_tcp_support {
* @pattern_max_len: maximum length of each pattern
* @pattern_min_len: minimum length of each pattern
* @max_pkt_offset: maximum Rx packet offset
+ * @max_nd_match_sets: maximum number of matchsets for net-detect,
+ * similar, but not necessarily identical, to max_match_sets for
+ * scheduled scans.
+ * See &struct cfg80211_sched_scan_request.@match_sets for more
+ * details.
* @tcp: TCP wakeup support information
*/
struct wiphy_wowlan_support {
@@ -2791,6 +2911,7 @@ struct wiphy_wowlan_support {
int pattern_max_len;
int pattern_min_len;
int max_pkt_offset;
+ int max_nd_match_sets;
const struct wiphy_wowlan_tcp_support *tcp;
};
@@ -3166,6 +3287,23 @@ static inline const char *wiphy_name(const struct wiphy *wiphy)
}
/**
+ * wiphy_new_nm - create a new wiphy for use with cfg80211
+ *
+ * @ops: The configuration operations for this device
+ * @sizeof_priv: The size of the private area to allocate
+ * @requested_name: Request a particular name.
+ * NULL is valid value, and means use the default phy%d naming.
+ *
+ * Create a new wiphy and associate the given operations with it.
+ * @sizeof_priv bytes are allocated for private use.
+ *
+ * Return: A pointer to the new wiphy. This pointer must be
+ * assigned to each netdev's ieee80211_ptr for proper operation.
+ */
+struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv,
+ const char *requested_name);
+
+/**
* wiphy_new - create a new wiphy for use with cfg80211
*
* @ops: The configuration operations for this device
@@ -3177,7 +3315,11 @@ static inline const char *wiphy_name(const struct wiphy *wiphy)
* Return: A pointer to the new wiphy. This pointer must be
* assigned to each netdev's ieee80211_ptr for proper operation.
*/
-struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
+static inline struct wiphy *wiphy_new(const struct cfg80211_ops *ops,
+ int sizeof_priv)
+{
+ return wiphy_new_nm(ops, sizeof_priv, NULL);
+}
/**
* wiphy_register - register a wiphy with cfg80211
@@ -4501,33 +4643,6 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev,
gfp_t gfp);
/**
- * cfg80211_radar_event - radar detection event
- * @wiphy: the wiphy
- * @chandef: chandef for the current channel
- * @gfp: context flags
- *
- * This function is called when a radar is detected on the current chanenl.
- */
-void cfg80211_radar_event(struct wiphy *wiphy,
- struct cfg80211_chan_def *chandef, gfp_t gfp);
-
-/**
- * cfg80211_cac_event - Channel availability check (CAC) event
- * @netdev: network device
- * @chandef: chandef for the current channel
- * @event: type of event
- * @gfp: context flags
- *
- * This function is called when a Channel availability check (CAC) is finished
- * or aborted. This must be called to notify the completion of a CAC process,
- * also by full-MAC drivers.
- */
-void cfg80211_cac_event(struct net_device *netdev,
- const struct cfg80211_chan_def *chandef,
- enum nl80211_radar_event event, gfp_t gfp);
-
-
-/**
* cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer
* @dev: network device
* @peer: peer's MAC address
@@ -4555,6 +4670,42 @@ void cfg80211_cqm_txe_notify(struct net_device *dev, const u8 *peer,
u32 num_packets, u32 rate, u32 intvl, gfp_t gfp);
/**
+ * cfg80211_cqm_beacon_loss_notify - beacon loss event
+ * @dev: network device
+ * @gfp: context flags
+ *
+ * Notify userspace about beacon loss from the connected AP.
+ */
+void cfg80211_cqm_beacon_loss_notify(struct net_device *dev, gfp_t gfp);
+
+/**
+ * cfg80211_radar_event - radar detection event
+ * @wiphy: the wiphy
+ * @chandef: chandef for the current channel
+ * @gfp: context flags
+ *
+ * This function is called when a radar is detected on the current chanenl.
+ */
+void cfg80211_radar_event(struct wiphy *wiphy,
+ struct cfg80211_chan_def *chandef, gfp_t gfp);
+
+/**
+ * cfg80211_cac_event - Channel availability check (CAC) event
+ * @netdev: network device
+ * @chandef: chandef for the current channel
+ * @event: type of event
+ * @gfp: context flags
+ *
+ * This function is called when a Channel availability check (CAC) is finished
+ * or aborted. This must be called to notify the completion of a CAC process,
+ * also by full-MAC drivers.
+ */
+void cfg80211_cac_event(struct net_device *netdev,
+ const struct cfg80211_chan_def *chandef,
+ enum nl80211_radar_event event, gfp_t gfp);
+
+
+/**
* cfg80211_gtk_rekey_notify - notify userspace about driver rekeying
* @dev: network device
* @bssid: BSSID of AP (to avoid races)
@@ -4657,6 +4808,20 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
void cfg80211_ch_switch_notify(struct net_device *dev,
struct cfg80211_chan_def *chandef);
+/*
+ * cfg80211_ch_switch_started_notify - notify channel switch start
+ * @dev: the device on which the channel switch started
+ * @chandef: the future channel definition
+ * @count: the number of TBTTs until the channel switch happens
+ *
+ * Inform the userspace about the channel switch that has just
+ * started, so that it can take appropriate actions (eg. starting
+ * channel switch on other vifs), if necessary.
+ */
+void cfg80211_ch_switch_started_notify(struct net_device *dev,
+ struct cfg80211_chan_def *chandef,
+ u8 count);
+
/**
* ieee80211_operating_class_to_band - convert operating class to band
*