diff options
Diffstat (limited to 'include/media/v4l2-common.h')
| -rw-r--r-- | include/media/v4l2-common.h | 145 |
1 files changed, 111 insertions, 34 deletions
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index aac8b7b6e691..e0d95a7c5d48 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -28,7 +28,7 @@ #include <media/v4l2-dev.h> -/* Common printk constucts for v4l-i2c drivers. These macros create a unique +/* Common printk constructs for v4l-i2c drivers. These macros create a unique prefix consisting of the driver name, the adapter number and the i2c address. */ #define v4l_printk(level, name, adapter, addr, fmt, arg...) \ @@ -50,7 +50,7 @@ /* These three macros assume that the debug level is set with a module parameter called 'debug'. */ #define v4l_dbg(level, debug, client, fmt, arg...) \ - do { \ + do { \ if (debug >= (level)) \ v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \ } while (0) @@ -80,9 +80,9 @@ /* These three macros assume that the debug level is set with a module parameter called 'debug'. */ #define v4l2_dbg(level, debug, dev, fmt, arg...) \ - do { \ + do { \ if (debug >= (level)) \ - v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); \ + v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); \ } while (0) /** @@ -127,7 +127,7 @@ struct v4l2_subdev_ops; * @client_type: name of the chip that's on the adapter. * @addr: I2C address. If zero, it will use @probe_addrs * @probe_addrs: array with a list of address. The last entry at such - * array should be %I2C_CLIENT_END. + * array should be %I2C_CLIENT_END. * * returns a &struct v4l2_subdev pointer. */ @@ -146,7 +146,7 @@ struct i2c_board_info; * @info: pointer to struct i2c_board_info used to replace the irq, * platform_data and addr arguments. * @probe_addrs: array with a list of address. The last entry at such - * array should be %I2C_CLIENT_END. + * array should be %I2C_CLIENT_END. * * returns a &struct v4l2_subdev pointer. */ @@ -174,17 +174,43 @@ void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, */ unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd); +/** + * enum v4l2_i2c_tuner_type - specifies the range of tuner address that + * should be used when seeking for I2C devices. + * + * @ADDRS_RADIO: Radio tuner addresses. + * Represent the following I2C addresses: + * 0x10 (if compiled with tea5761 support) + * and 0x60. + * @ADDRS_DEMOD: Demod tuner addresses. + * Represent the following I2C addresses: + * 0x42, 0x43, 0x4a and 0x4b. + * @ADDRS_TV: TV tuner addresses. + * Represent the following I2C addresses: + * 0x42, 0x43, 0x4a, 0x4b, 0x60, 0x61, 0x62, + * 0x63 and 0x64. + * @ADDRS_TV_WITH_DEMOD: TV tuner addresses if demod is present, this + * excludes addresses used by the demodulator + * from the list of candidates. + * Represent the following I2C addresses: + * 0x60, 0x61, 0x62, 0x63 and 0x64. + * + * NOTE: All I2C addresses above use the 7-bit notation. + */ enum v4l2_i2c_tuner_type { - ADDRS_RADIO, /* Radio tuner addresses */ - ADDRS_DEMOD, /* Demod tuner addresses */ - ADDRS_TV, /* TV tuner addresses */ - /* TV tuner addresses if demod is present, this excludes - addresses used by the demodulator from the list of - candidates. */ + ADDRS_RADIO, + ADDRS_DEMOD, + ADDRS_TV, ADDRS_TV_WITH_DEMOD, }; -/* Return a list of I2C tuner addresses to probe. Use only if the tuner - addresses are unknown. */ +/** + * v4l2_i2c_tuner_addrs - Return a list of I2C tuner addresses to probe. + * + * @type: type of the tuner to seek, as defined by + * &enum v4l2_i2c_tuner_type. + * + * NOTE: Use only if the tuner addresses are unknown. + */ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type); /* ------------------------------------------------------------------------- */ @@ -224,10 +250,14 @@ void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi, /* ------------------------------------------------------------------------- */ -/* Note: these remaining ioctls/structs should be removed as well, but they are - still used in tuner-simple.c (TUNER_SET_CONFIG), cx18/ivtv (RESET) and - v4l2-int-device.h (v4l2_routing). To remove these ioctls some more cleanup - is needed in those modules. */ +/* + * FIXME: these remaining ioctls/structs should be removed as well, but they + * are still used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET). + * To remove these ioctls some more cleanup is needed in those modules. + * + * It doesn't make much sense on documenting them, as what we really want is + * to get rid of them. + */ /* s_config */ struct v4l2_priv_tun_config { @@ -236,32 +266,79 @@ struct v4l2_priv_tun_config { }; #define TUNER_SET_CONFIG _IOW('d', 92, struct v4l2_priv_tun_config) -#define VIDIOC_INT_RESET _IOW ('d', 102, u32) - -struct v4l2_routing { - u32 input; - u32 output; -}; +#define VIDIOC_INT_RESET _IOW ('d', 102, u32) /* ------------------------------------------------------------------------- */ /* Miscellaneous helper functions */ -void v4l_bound_align_image(unsigned int *w, unsigned int wmin, +/** + * v4l_bound_align_image - adjust video dimensions according to + * a given constraints. + * + * @width: pointer to width that will be adjusted if needed. + * @wmin: minimum width. + * @wmax: maximum width. + * @walign: least significant bit on width. + * @height: pointer to height that will be adjusted if needed. + * @hmin: minimum height. + * @hmax: maximum height. + * @halign: least significant bit on width. + * @salign: least significant bit for the image size (e. g. + * :math:`width * height`). + * + * Clip an image to have @width between @wmin and @wmax, and @height between + * @hmin and @hmax, inclusive. + * + * Additionally, the @width will be a multiple of :math:`2^{walign}`, + * the @height will be a multiple of :math:`2^{halign}`, and the overall + * size :math:`width * height` will be a multiple of :math:`2^{salign}`. + * + * .. note:: + * + * #. The clipping rectangle may be shrunk or enlarged to fit the alignment + * constraints. + * #. @wmax must not be smaller than @wmin. + * #. @hmax must not be smaller than @hmin. + * #. The alignments must not be so high there are no possible image + * sizes within the allowed bounds. + * #. @wmin and @hmin must be at least 1 (don't use 0). + * #. For @walign, @halign and @salign, if you don't care about a certain + * alignment, specify ``0``, as :math:`2^0 = 1` and one byte alignment + * is equivalent to no alignment. + * #. If you only want to adjust downward, specify a maximum that's the + * same as the initial value. + */ +void v4l_bound_align_image(unsigned int *width, unsigned int wmin, unsigned int wmax, unsigned int walign, - unsigned int *h, unsigned int hmin, + unsigned int *height, unsigned int hmin, unsigned int hmax, unsigned int halign, unsigned int salign); -struct v4l2_discrete_probe { - const struct v4l2_frmsize_discrete *sizes; - int num_sizes; -}; - -const struct v4l2_frmsize_discrete *v4l2_find_nearest_format( - const struct v4l2_discrete_probe *probe, - s32 width, s32 height); +/** + * v4l2_find_nearest_format - find the nearest format size among a discrete + * set of resolutions. + * + * @sizes: array of &struct v4l2_frmsize_discrete image sizes. + * @num_sizes: length of @sizes array. + * @width: desired width. + * @height: desired height. + * + * Finds the closest resolution to minimize the width and height differences + * between what requested and the supported resolutions. + */ +const struct v4l2_frmsize_discrete * +v4l2_find_nearest_format(const struct v4l2_frmsize_discrete *sizes, + const size_t num_sizes, + s32 width, s32 height); +/** + * v4l2_get_timestamp - helper routine to get a timestamp to be used when + * filling streaming metadata. Internally, it uses ktime_get_ts(), + * which is the recommended way to get it. + * + * @tv: pointer to &struct timeval to be filled. + */ void v4l2_get_timestamp(struct timeval *tv); #endif /* V4L2_COMMON_H_ */ |