summaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/eeprom_93xx46.h3
-rw-r--r--include/linux/fpga/altera-pr-ip-core.h1
-rw-r--r--include/linux/fpga/fpga-bridge.h2
-rw-r--r--include/linux/fpga/fpga-mgr.h2
-rw-r--r--include/linux/fs.h3
-rw-r--r--include/linux/mcb.h2
-rw-r--r--include/linux/nvmem-provider.h1
-rw-r--r--include/linux/phy/phy.h2
-rw-r--r--include/linux/soundwire/sdw.h5
-rw-r--r--include/linux/soundwire/sdw_intel.h6
-rw-r--r--include/linux/stm.h2
-rw-r--r--include/linux/sysfs.h6
12 files changed, 20 insertions, 15 deletions
diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h
index 99580c22f91a..34c2175e6a1e 100644
--- a/include/linux/eeprom_93xx46.h
+++ b/include/linux/eeprom_93xx46.h
@@ -10,6 +10,9 @@ struct eeprom_93xx46_platform_data {
#define EE_ADDR8 0x01 /* 8 bit addr. cfg */
#define EE_ADDR16 0x02 /* 16 bit addr. cfg */
#define EE_READONLY 0x08 /* forbid writing */
+#define EE_SIZE1K 0x10 /* 1 kb of data, that is a 93xx46 */
+#define EE_SIZE2K 0x20 /* 2 kb of data, that is a 93xx56 */
+#define EE_SIZE4K 0x40 /* 4 kb of data, that is a 93xx66 */
unsigned int quirks;
/* Single word read transfers only; no sequential read. */
diff --git a/include/linux/fpga/altera-pr-ip-core.h b/include/linux/fpga/altera-pr-ip-core.h
index 0b08ac20ab16..a6b4c07858cc 100644
--- a/include/linux/fpga/altera-pr-ip-core.h
+++ b/include/linux/fpga/altera-pr-ip-core.h
@@ -13,6 +13,5 @@
#include <linux/io.h>
int alt_pr_register(struct device *dev, void __iomem *reg_base);
-void alt_pr_unregister(struct device *dev);
#endif /* _ALT_PR_IP_CORE_H */
diff --git a/include/linux/fpga/fpga-bridge.h b/include/linux/fpga/fpga-bridge.h
index 817600a32c93..6c3c28806ff1 100644
--- a/include/linux/fpga/fpga-bridge.h
+++ b/include/linux/fpga/fpga-bridge.h
@@ -11,7 +11,7 @@ struct fpga_bridge;
/**
* struct fpga_bridge_ops - ops for low level FPGA bridge drivers
* @enable_show: returns the FPGA bridge's status
- * @enable_set: set a FPGA bridge as enabled or disabled
+ * @enable_set: set an FPGA bridge as enabled or disabled
* @fpga_bridge_remove: set FPGA into a specific state during driver remove
* @groups: optional attribute groups.
*/
diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h
index 2bc3030a69e5..ec2cd8bfceb0 100644
--- a/include/linux/fpga/fpga-mgr.h
+++ b/include/linux/fpga/fpga-mgr.h
@@ -75,7 +75,7 @@ enum fpga_mgr_states {
#define FPGA_MGR_COMPRESSED_BITSTREAM BIT(4)
/**
- * struct fpga_image_info - information specific to a FPGA image
+ * struct fpga_image_info - information specific to an FPGA image
* @flags: boolean flags as defined above
* @enable_timeout_us: maximum time to enable traffic through bridge (uSec)
* @disable_timeout_us: maximum time to disable traffic through bridge (uSec)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index bb40ac8608a7..640574294216 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3247,11 +3247,8 @@ ssize_t vfs_iocb_iter_write(struct file *file, struct kiocb *iocb,
struct iov_iter *iter);
/* fs/block_dev.c */
-extern ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to);
-extern ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from);
extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
int datasync);
-extern void block_sync_page(struct page *page);
/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
diff --git a/include/linux/mcb.h b/include/linux/mcb.h
index 71dd10a3d928..f6efb16f9d1b 100644
--- a/include/linux/mcb.h
+++ b/include/linux/mcb.h
@@ -120,7 +120,7 @@ extern int __must_check __mcb_register_driver(struct mcb_driver *drv,
__mcb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
extern void mcb_unregister_driver(struct mcb_driver *driver);
#define module_mcb_driver(__mcb_driver) \
- module_driver(__mcb_driver, mcb_register_driver, mcb_unregister_driver);
+ module_driver(__mcb_driver, mcb_register_driver, mcb_unregister_driver)
extern void mcb_bus_add_devices(const struct mcb_bus *bus);
extern int mcb_device_register(struct mcb_bus *bus, struct mcb_device *dev);
extern struct mcb_bus *mcb_alloc_bus(struct device *carrier);
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index 471cb7b9e896..104505e9028f 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -25,6 +25,7 @@ enum nvmem_type {
NVMEM_TYPE_EEPROM,
NVMEM_TYPE_OTP,
NVMEM_TYPE_BATTERY_BACKED,
+ NVMEM_TYPE_FRAM,
};
#define NVMEM_DEVID_NONE (-1)
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 0ed434d02196..f3286f4cd306 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -125,7 +125,7 @@ struct phy_ops {
/**
* struct phy_attrs - represents phy attributes
* @bus_width: Data path width implemented by PHY
- * @max_link_rate: Maximum link rate supported by PHY (in Mbps)
+ * @max_link_rate: Maximum link rate supported by PHY (units to be decided by producer and consumer)
* @mode: PHY mode
*/
struct phy_attrs {
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index de9802a24e7e..a48ac3e77301 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -612,6 +612,7 @@ struct sdw_bus_params {
* @update_status: Update Slave status
* @bus_config: Update the bus config for Slave
* @port_prep: Prepare the port with parameters
+ * @clk_stop: handle imp-def sequences before and after prepare and de-prepare
*/
struct sdw_slave_ops {
int (*read_prop)(struct sdw_slave *sdw);
@@ -624,7 +625,6 @@ struct sdw_slave_ops {
int (*port_prep)(struct sdw_slave *slave,
struct sdw_prepare_ch *prepare_ch,
enum sdw_port_prep_ops pre_ops);
- int (*get_clk_stop_mode)(struct sdw_slave *slave);
int (*clk_stop)(struct sdw_slave *slave,
enum sdw_clk_stop_mode mode,
enum sdw_clk_stop_type type);
@@ -675,7 +675,6 @@ struct sdw_slave {
struct list_head node;
struct completion port_ready[SDW_MAX_PORTS];
unsigned int m_port_map[SDW_MAX_PORTS];
- enum sdw_clk_stop_mode curr_clk_stop_mode;
u16 dev_num;
u16 dev_num_sticky;
bool probed;
@@ -1040,7 +1039,7 @@ int sdw_write(struct sdw_slave *slave, u32 addr, u8 value);
int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value);
int sdw_read_no_pm(struct sdw_slave *slave, u32 addr);
int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
-int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
+int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val);
int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h
index 3a5446ac014a..1ebea7764011 100644
--- a/include/linux/soundwire/sdw_intel.h
+++ b/include/linux/soundwire/sdw_intel.h
@@ -58,7 +58,7 @@ struct sdw_intel_acpi_info {
u32 link_mask;
};
-struct sdw_intel_link_res;
+struct sdw_intel_link_dev;
/* Intel clock-stop/pm_runtime quirk definitions */
@@ -109,7 +109,7 @@ struct sdw_intel_slave_id {
* Controller
* @num_slaves: total number of devices exposed across all enabled links
* @handle: ACPI parent handle
- * @links: information for each link (controller-specific and kept
+ * @ldev: information for each link (controller-specific and kept
* opaque here)
* @ids: array of slave_id, representing Slaves exposed across all enabled
* links
@@ -123,7 +123,7 @@ struct sdw_intel_ctx {
u32 link_mask;
int num_slaves;
acpi_handle handle;
- struct sdw_intel_link_res *links;
+ struct sdw_intel_link_dev **ldev;
struct sdw_intel_slave_id *ids;
struct list_head link_list;
struct mutex shim_lock; /* lock for access to shared SHIM registers */
diff --git a/include/linux/stm.h b/include/linux/stm.h
index c6f577ab6f21..3b22689512be 100644
--- a/include/linux/stm.h
+++ b/include/linux/stm.h
@@ -57,7 +57,7 @@ struct stm_device;
*
* Normally, an STM device will have a range of masters available to software
* and the rest being statically assigned to various hardware trace sources.
- * The former is defined by the the range [@sw_start..@sw_end] of the device
+ * The former is defined by the range [@sw_start..@sw_end] of the device
* description. That is, the lowest master that can be allocated to software
* writers is @sw_start and data from this writer will appear is @sw_start
* master in the STP stream.
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index d76a1ddf83a3..a12556a4b93a 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -162,6 +162,12 @@ static const struct attribute_group _name##_group = { \
}; \
__ATTRIBUTE_GROUPS(_name)
+#define BIN_ATTRIBUTE_GROUPS(_name) \
+static const struct attribute_group _name##_group = { \
+ .bin_attrs = _name##_attrs, \
+}; \
+__ATTRIBUTE_GROUPS(_name)
+
struct file;
struct vm_area_struct;
struct address_space;
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 23:01:32 +0300