diff options
Diffstat (limited to 'include/linux/usb.h')
| -rw-r--r-- | include/linux/usb.h | 67 |
1 files changed, 27 insertions, 40 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h index a21074861f91..e76e3515a1da 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -440,11 +440,6 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, /* ----------------------------------------------------------------------- */ -/* USB device number allocation bitmap */ -struct usb_devmap { - unsigned long devicemap[128 / (8*sizeof(unsigned long))]; -}; - /* * Allocated per bus (tree of devices) we have: */ @@ -472,7 +467,7 @@ struct usb_bus { * round-robin allocation */ struct mutex devnum_next_mutex; /* devnum_next mutex */ - struct usb_devmap devmap; /* device address allocation map */ + DECLARE_BITMAP(devmap, 128); /* USB device number allocation bitmap */ struct usb_device *root_hub; /* Root hub */ struct usb_bus *hs_companion; /* Companion EHCI bus, if any */ @@ -500,6 +495,12 @@ struct usb_dev_state; struct usb_tt; +enum usb_link_tunnel_mode { + USB_LINK_UNKNOWN = 0, + USB_LINK_NATIVE, + USB_LINK_TUNNELED, +}; + enum usb_port_connect_type { USB_PORT_CONNECT_TYPE_UNKNOWN = 0, USB_PORT_CONNECT_TYPE_HOT_PLUG, @@ -610,6 +611,8 @@ struct usb3_lpm_parameters { * WUSB devices are not, until we authorize them from user space. * FIXME -- complete doc * @authenticated: Crypto authentication passed + * @tunnel_mode: Connection native or tunneled over USB4 + * @usb4_link: device link to the USB4 host interface * @lpm_capable: device supports LPM * @lpm_devinit_allow: Allow USB3 device initiated LPM, exit latency is in range * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM @@ -632,7 +635,6 @@ struct usb3_lpm_parameters { * @reset_resume: needs reset instead of resume * @port_is_suspended: the upstream port is suspended (L2 or U3) * @slot_id: Slot ID assigned by xHCI - * @removable: Device can be physically removed from this port * @l1_params: best effor service latency for USB2 L1 LPM state, and L1 timeout. * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout. * @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout. @@ -720,6 +722,8 @@ struct usb_device { unsigned do_remote_wakeup:1; unsigned reset_resume:1; unsigned port_is_suspended:1; + enum usb_link_tunnel_mode tunnel_mode; + struct device_link *usb4_link; int slot_id; struct usb2_lpm_parameters l1_params; @@ -1145,16 +1149,6 @@ extern ssize_t usb_store_new_id(struct usb_dynids *dynids, extern ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf); /** - * struct usbdrv_wrap - wrapper for driver-model structure - * @driver: The driver-model core driver structure. - * @for_devices: Non-zero for device drivers, 0 for interface drivers. - */ -struct usbdrv_wrap { - struct device_driver driver; - int for_devices; -}; - -/** * struct usb_driver - identifies USB interface driver to usbcore * @name: The driver name should be unique among USB drivers, * and should normally be the same as the module name. @@ -1187,6 +1181,7 @@ struct usbdrv_wrap { * post_reset method is called. * @post_reset: Called by usb_reset_device() after the device * has been reset + * @shutdown: Called at shut-down time to quiesce the device. * @id_table: USB drivers use ID table to support hotplugging. * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set * or your driver's probe function will never get called. @@ -1194,7 +1189,7 @@ struct usbdrv_wrap { * is bound to the driver. * @dynids: used internally to hold the list of dynamically added device * ids for this driver. - * @drvwrap: Driver-model core structure wrapper. + * @driver: The driver-model core driver structure. * @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be * added to this driver by preventing the sysfs file from being created. * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend @@ -1238,17 +1233,19 @@ struct usb_driver { int (*pre_reset)(struct usb_interface *intf); int (*post_reset)(struct usb_interface *intf); + void (*shutdown)(struct usb_interface *intf); + const struct usb_device_id *id_table; const struct attribute_group **dev_groups; struct usb_dynids dynids; - struct usbdrv_wrap drvwrap; + struct device_driver driver; unsigned int no_dynamic_id:1; unsigned int supports_autosuspend:1; unsigned int disable_hub_initiated_lpm:1; unsigned int soft_unbind:1; }; -#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver) +#define to_usb_driver(d) container_of(d, struct usb_driver, driver) /** * struct usb_device_driver - identifies USB device driver to usbcore @@ -1264,9 +1261,12 @@ struct usb_driver { * module is being unloaded. * @suspend: Called when the device is going to be suspended by the system. * @resume: Called when the device is being resumed by the system. + * @choose_configuration: If non-NULL, called instead of the default + * usb_choose_configuration(). If this returns an error then we'll go + * on to call the normal usb_choose_configuration(). * @dev_groups: Attributes attached to the device that will be created once it * is bound to the driver. - * @drvwrap: Driver-model core structure wrapper. + * @driver: The driver-model core driver structure. * @id_table: used with @match() to select better matching driver at * probe() time. * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend @@ -1275,7 +1275,7 @@ struct usb_driver { * resume and suspend functions will be called in addition to the driver's * own, so this part of the setup does not need to be replicated. * - * USB drivers must provide all the fields listed above except drvwrap, + * USB drivers must provide all the fields listed above except driver, * match, and id_table. */ struct usb_device_driver { @@ -1287,14 +1287,17 @@ struct usb_device_driver { int (*suspend) (struct usb_device *udev, pm_message_t message); int (*resume) (struct usb_device *udev, pm_message_t message); + + int (*choose_configuration) (struct usb_device *udev); + const struct attribute_group **dev_groups; - struct usbdrv_wrap drvwrap; + struct device_driver driver; const struct usb_device_id *id_table; unsigned int supports_autosuspend:1; unsigned int generic_subclass:1; }; #define to_usb_device_driver(d) container_of(d, struct usb_device_driver, \ - drvwrap.driver) + driver) /** * struct usb_class_driver - identifies a USB driver that wants to use the USB major number @@ -1823,22 +1826,6 @@ void *usb_alloc_coherent(struct usb_device *dev, size_t size, void usb_free_coherent(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma); -#if 0 -struct urb *usb_buffer_map(struct urb *urb); -void usb_buffer_dmasync(struct urb *urb); -void usb_buffer_unmap(struct urb *urb); -#endif - -struct scatterlist; -int usb_buffer_map_sg(const struct usb_device *dev, int is_in, - struct scatterlist *sg, int nents); -#if 0 -void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in, - struct scatterlist *sg, int n_hw_ents); -#endif -void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in, - struct scatterlist *sg, int n_hw_ents); - /*-------------------------------------------------------------------* * SYNCHRONOUS CALL SUPPORT * *-------------------------------------------------------------------*/ |