diff options
Diffstat (limited to 'include/linux/spi')
| -rw-r--r-- | include/linux/spi/max7301.h | 8 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 15 | ||||
| -rw-r--r-- | include/linux/spi/spi_gpio.h | 5 |
3 files changed, 28 insertions, 0 deletions
diff --git a/include/linux/spi/max7301.h b/include/linux/spi/max7301.h index 34af0a3477bf..bcaa2f762cc1 100644 --- a/include/linux/spi/max7301.h +++ b/include/linux/spi/max7301.h @@ -11,6 +11,7 @@ struct max7301 { struct mutex lock; u8 port_config[8]; /* field 0 is unused */ u32 out_level; /* cached output levels */ + u32 input_pullup_active; struct gpio_chip chip; struct device *dev; int (*write)(struct device *dev, unsigned int reg, unsigned int val); @@ -20,6 +21,13 @@ struct max7301 { struct max7301_platform_data { /* number assigned to the first GPIO */ unsigned base; + /* + * bitmask controlling the pullup configuration, + * + * _note_ the 4 lowest bits are unused, because the first 4 + * ports of the controller are not used, too. + */ + u32 input_pullup_active; }; extern int __max730x_remove(struct device *dev); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index af56071b06f9..92e52a1e6af3 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -213,6 +213,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @dma_alignment: SPI controller constraint on DMA buffers alignment. * @mode_bits: flags understood by this controller driver * @flags: other constraints relevant to this driver + * @bus_lock_spinlock: spinlock for SPI bus locking + * @bus_lock_mutex: mutex for SPI bus locking + * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. @@ -262,6 +265,13 @@ struct spi_master { #define SPI_MASTER_NO_RX BIT(1) /* can't do buffer read */ #define SPI_MASTER_NO_TX BIT(2) /* can't do buffer write */ + /* lock and mutex for SPI bus locking */ + spinlock_t bus_lock_spinlock; + struct mutex bus_lock_mutex; + + /* flag indicating that the SPI bus is locked for exclusive use */ + bool bus_lock_flag; + /* Setup mode and clock, etc (spi driver may call many times). * * IMPORTANT: this may be called when transfers to another @@ -542,6 +552,8 @@ static inline void spi_message_free(struct spi_message *m) extern int spi_setup(struct spi_device *spi); extern int spi_async(struct spi_device *spi, struct spi_message *message); +extern int spi_async_locked(struct spi_device *spi, + struct spi_message *message); /*---------------------------------------------------------------------------*/ @@ -551,6 +563,9 @@ extern int spi_async(struct spi_device *spi, struct spi_message *message); */ extern int spi_sync(struct spi_device *spi, struct spi_message *message); +extern int spi_sync_locked(struct spi_device *spi, struct spi_message *message); +extern int spi_bus_lock(struct spi_master *master); +extern int spi_bus_unlock(struct spi_master *master); /** * spi_write - SPI synchronous write diff --git a/include/linux/spi/spi_gpio.h b/include/linux/spi/spi_gpio.h index ca6782ee4b9f..369b3d7d5b95 100644 --- a/include/linux/spi/spi_gpio.h +++ b/include/linux/spi/spi_gpio.h @@ -29,11 +29,16 @@ * SPI_GPIO_NO_CHIPSELECT to the controller_data: * .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT; * + * If the MISO or MOSI pin is not available then it should be set to + * SPI_GPIO_NO_MISO or SPI_GPIO_NO_MOSI. + * * If the bitbanged bus is later switched to a "native" controller, * that platform_device and controller_data should be removed. */ #define SPI_GPIO_NO_CHIPSELECT ((unsigned long)-1l) +#define SPI_GPIO_NO_MISO ((unsigned long)-1l) +#define SPI_GPIO_NO_MOSI ((unsigned long)-1l) /** * struct spi_gpio_platform_data - parameter for bitbanged SPI master |