diff options
Diffstat (limited to 'include/linux/spi/spi.h')
| -rw-r--r-- | include/linux/spi/spi.h | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 053abd22ad31..af4f265d0f67 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -109,6 +109,7 @@ void spi_statistics_add_transfer_stats(struct spi_statistics *stats, * This may be changed by the device's driver, or left at the * default (0) indicating protocol words are eight bit bytes. * The spi_transfer.bits_per_word can override this for each transfer. + * @rt: Make the pump thread real time priority. * @irq: Negative, or the number passed to request_irq() to receive * interrupts from this device. * @controller_state: Controller's runtime state @@ -143,6 +144,7 @@ struct spi_device { u32 max_speed_hz; u8 chip_select; u8 bits_per_word; + bool rt; u32 mode; #define SPI_CPHA 0x01 /* clock phase */ #define SPI_CPOL 0x02 /* clock polarity */ @@ -735,6 +737,9 @@ extern void spi_res_release(struct spi_controller *ctlr, * @bits_per_word: select a bits_per_word other than the device default * for this transfer. If 0 the default (from @spi_device) is used. * @cs_change: affects chipselect after this transfer completes + * @cs_change_delay: delay between cs deassert and assert when + * @cs_change is set and @spi_transfer is not the last in @spi_message + * @cs_change_delay_unit: unit of cs_change_delay * @delay_usecs: microseconds to delay after this transfer before * (optionally) changing the chipselect status, then starting * the next transfer or completing this @spi_message. @@ -742,6 +747,9 @@ extern void spi_res_release(struct spi_controller *ctlr, * (set by bits_per_word) transmission. * @word_delay: clock cycles to inter word delay after each word size * (set by bits_per_word) transmission. + * @effective_speed_hz: the effective SCK-speed that was used to + * transfer this transfer. Set to 0 if the spi bus driver does + * not support it. * @transfer_list: transfers are sequenced through @spi_message.transfers * @tx_sg: Scatterlist for transmit, currently not for client use * @rx_sg: Scatterlist for receive, currently not for client use @@ -824,9 +832,16 @@ struct spi_transfer { u8 bits_per_word; u8 word_delay_usecs; u16 delay_usecs; + u16 cs_change_delay; + u8 cs_change_delay_unit; +#define SPI_DELAY_UNIT_USECS 0 +#define SPI_DELAY_UNIT_NSECS 1 +#define SPI_DELAY_UNIT_SCK 2 u32 speed_hz; u16 word_delay; + u32 effective_speed_hz; + struct list_head transfer_list; }; @@ -967,6 +982,8 @@ static inline void spi_message_free(struct spi_message *m) kfree(m); } +extern void spi_set_cs_timing(struct spi_device *spi, u8 setup, u8 hold, u8 inactive_dly); + extern int spi_setup(struct spi_device *spi); extern int spi_async(struct spi_device *spi, struct spi_message *message); extern int spi_async_locked(struct spi_device *spi, @@ -997,6 +1014,26 @@ spi_max_transfer_size(struct spi_device *spi) return min(tr_max, msg_max); } +/** + * spi_is_bpw_supported - Check if bits per word is supported + * @spi: SPI device + * @bpw: Bits per word + * + * This function checks to see if the SPI controller supports @bpw. + * + * Returns: + * True if @bpw is supported, false otherwise. + */ +static inline bool spi_is_bpw_supported(struct spi_device *spi, u32 bpw) +{ + u32 bpw_mask = spi->master->bits_per_word_mask; + + if (bpw == 8 || (bpw <= 32 && bpw_mask & SPI_BPW_MASK(bpw))) + return true; + + return false; +} + /*---------------------------------------------------------------------------*/ /* SPI transfer replacement methods which make use of spi_res */ |