diff options
Diffstat (limited to 'include/linux/scmi_protocol.h')
| -rw-r--r-- | include/linux/scmi_protocol.h | 144 |
1 files changed, 131 insertions, 13 deletions
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index 71923ae63b01..688466a0e816 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -47,6 +47,10 @@ struct scmi_clock_info { bool rate_discrete; bool rate_changed_notifications; bool rate_change_requested_notifications; + bool state_ctrl_forbidden; + bool rate_ctrl_forbidden; + bool parent_ctrl_forbidden; + bool extended_config; union { struct { int num_rates; @@ -58,6 +62,8 @@ struct scmi_clock_info { u64 step_size; } range; }; + int num_parents; + u32 *parents; }; enum scmi_power_scale { @@ -70,6 +76,13 @@ struct scmi_handle; struct scmi_device; struct scmi_protocol_handle; +enum scmi_clock_oem_config { + SCMI_CLOCK_CFG_DUTY_CYCLE = 0x1, + SCMI_CLOCK_CFG_PHASE, + SCMI_CLOCK_CFG_OEM_START = 0x80, + SCMI_CLOCK_CFG_OEM_END = 0xFF, +}; + /** * struct scmi_clk_proto_ops - represents the various operations provided * by SCMI Clock Protocol @@ -80,6 +93,11 @@ struct scmi_protocol_handle; * @rate_set: set the clock rate of a clock * @enable: enables the specified clock * @disable: disables the specified clock + * @state_get: get the status of the specified clock + * @config_oem_get: get the value of an OEM specific clock config + * @config_oem_set: set the value of an OEM specific clock config + * @parent_get: get the parent id of a clk + * @parent_set: set the parent of a clock */ struct scmi_clk_proto_ops { int (*count_get)(const struct scmi_protocol_handle *ph); @@ -90,11 +108,20 @@ struct scmi_clk_proto_ops { u64 *rate); int (*rate_set)(const struct scmi_protocol_handle *ph, u32 clk_id, u64 rate); - int (*enable)(const struct scmi_protocol_handle *ph, u32 clk_id); - int (*disable)(const struct scmi_protocol_handle *ph, u32 clk_id); - int (*enable_atomic)(const struct scmi_protocol_handle *ph, u32 clk_id); - int (*disable_atomic)(const struct scmi_protocol_handle *ph, - u32 clk_id); + int (*enable)(const struct scmi_protocol_handle *ph, u32 clk_id, + bool atomic); + int (*disable)(const struct scmi_protocol_handle *ph, u32 clk_id, + bool atomic); + int (*state_get)(const struct scmi_protocol_handle *ph, u32 clk_id, + bool *enabled, bool atomic); + int (*config_oem_get)(const struct scmi_protocol_handle *ph, u32 clk_id, + enum scmi_clock_oem_config oem_type, + u32 *oem_val, u32 *attributes, bool atomic); + int (*config_oem_set)(const struct scmi_protocol_handle *ph, u32 clk_id, + enum scmi_clock_oem_config oem_type, + u32 oem_val, bool atomic); + int (*parent_get)(const struct scmi_protocol_handle *ph, u32 clk_id, u32 *parent_id); + int (*parent_set)(const struct scmi_protocol_handle *ph, u32 clk_id, u32 parent_id); }; struct scmi_perf_domain_info { @@ -112,8 +139,9 @@ struct scmi_perf_domain_info { * @limits_get: gets limits on the performance level of a domain * @level_set: sets the performance level of a domain * @level_get: gets the performance level of a domain - * @device_domain_id: gets the scmi domain id for a given device * @transition_latency_get: gets the DVFS transition latency for a given device + * @rate_limit_get: gets the minimum time (us) required between successive + * requests * @device_opps_add: adds all the OPPs for a given device * @freq_set: sets the frequency for a given device using sustained frequency * to sustained performance level mapping @@ -123,6 +151,8 @@ struct scmi_perf_domain_info { * at a given frequency * @fast_switch_possible: indicates if fast DVFS switching is possible or not * for a given device + * @fast_switch_rate_limit: gets the minimum time (us) required between + * successive fast_switching requests * @power_scale_mw_get: indicates if the power values provided are in milliWatts * or in some other (abstract) scale */ @@ -138,11 +168,12 @@ struct scmi_perf_proto_ops { u32 level, bool poll); int (*level_get)(const struct scmi_protocol_handle *ph, u32 domain, u32 *level, bool poll); - int (*device_domain_id)(struct device *dev); int (*transition_latency_get)(const struct scmi_protocol_handle *ph, - struct device *dev); + u32 domain); + int (*rate_limit_get)(const struct scmi_protocol_handle *ph, + u32 domain, u32 *rate_limit); int (*device_opps_add)(const struct scmi_protocol_handle *ph, - struct device *dev); + struct device *dev, u32 domain); int (*freq_set)(const struct scmi_protocol_handle *ph, u32 domain, unsigned long rate, bool poll); int (*freq_get)(const struct scmi_protocol_handle *ph, u32 domain, @@ -150,7 +181,9 @@ struct scmi_perf_proto_ops { int (*est_power_get)(const struct scmi_protocol_handle *ph, u32 domain, unsigned long *rate, unsigned long *power); bool (*fast_switch_possible)(const struct scmi_protocol_handle *ph, - struct device *dev); + u32 domain); + int (*fast_switch_rate_limit)(const struct scmi_protocol_handle *ph, + u32 domain, u32 *rate_limit); enum scmi_power_scale (*power_scale_get)(const struct scmi_protocol_handle *ph); }; @@ -704,6 +737,89 @@ struct scmi_powercap_proto_ops { u32 *power_thresh_high); }; +enum scmi_pinctrl_selector_type { + PIN_TYPE = 0, + GROUP_TYPE, + FUNCTION_TYPE, +}; + +enum scmi_pinctrl_conf_type { + SCMI_PIN_DEFAULT = 0, + SCMI_PIN_BIAS_BUS_HOLD = 1, + SCMI_PIN_BIAS_DISABLE = 2, + SCMI_PIN_BIAS_HIGH_IMPEDANCE = 3, + SCMI_PIN_BIAS_PULL_UP = 4, + SCMI_PIN_BIAS_PULL_DEFAULT = 5, + SCMI_PIN_BIAS_PULL_DOWN = 6, + SCMI_PIN_DRIVE_OPEN_DRAIN = 7, + SCMI_PIN_DRIVE_OPEN_SOURCE = 8, + SCMI_PIN_DRIVE_PUSH_PULL = 9, + SCMI_PIN_DRIVE_STRENGTH = 10, + SCMI_PIN_INPUT_DEBOUNCE = 11, + SCMI_PIN_INPUT_MODE = 12, + SCMI_PIN_PULL_MODE = 13, + SCMI_PIN_INPUT_VALUE = 14, + SCMI_PIN_INPUT_SCHMITT = 15, + SCMI_PIN_LOW_POWER_MODE = 16, + SCMI_PIN_OUTPUT_MODE = 17, + SCMI_PIN_OUTPUT_VALUE = 18, + SCMI_PIN_POWER_SOURCE = 19, + SCMI_PIN_SLEW_RATE = 20, + SCMI_PIN_OEM_START = 192, + SCMI_PIN_OEM_END = 255, +}; + +/** + * struct scmi_pinctrl_proto_ops - represents the various operations provided + * by SCMI Pinctrl Protocol + * + * @count_get: returns count of the registered elements in given type + * @name_get: returns name by index of given type + * @group_pins_get: returns the set of pins, assigned to the specified group + * @function_groups_get: returns the set of groups, assigned to the specified + * function + * @mux_set: set muxing function for groups of pins + * @settings_get_one: returns one configuration parameter for pin or group + * specified by config_type + * @settings_get_all: returns all configuration parameters for pin or group + * @settings_conf: sets the configuration parameter for pin or group + * @pin_request: aquire pin before selecting mux setting + * @pin_free: frees pin, acquired by request_pin call + */ +struct scmi_pinctrl_proto_ops { + int (*count_get)(const struct scmi_protocol_handle *ph, + enum scmi_pinctrl_selector_type type); + int (*name_get)(const struct scmi_protocol_handle *ph, u32 selector, + enum scmi_pinctrl_selector_type type, + const char **name); + int (*group_pins_get)(const struct scmi_protocol_handle *ph, + u32 selector, const unsigned int **pins, + unsigned int *nr_pins); + int (*function_groups_get)(const struct scmi_protocol_handle *ph, + u32 selector, unsigned int *nr_groups, + const unsigned int **groups); + int (*mux_set)(const struct scmi_protocol_handle *ph, u32 selector, + u32 group); + int (*settings_get_one)(const struct scmi_protocol_handle *ph, + u32 selector, + enum scmi_pinctrl_selector_type type, + enum scmi_pinctrl_conf_type config_type, + u32 *config_value); + int (*settings_get_all)(const struct scmi_protocol_handle *ph, + u32 selector, + enum scmi_pinctrl_selector_type type, + unsigned int *nr_configs, + enum scmi_pinctrl_conf_type *config_types, + u32 *config_values); + int (*settings_conf)(const struct scmi_protocol_handle *ph, + u32 selector, enum scmi_pinctrl_selector_type type, + unsigned int nr_configs, + enum scmi_pinctrl_conf_type *config_type, + u32 *config_value); + int (*pin_request)(const struct scmi_protocol_handle *ph, u32 pin); + int (*pin_free)(const struct scmi_protocol_handle *ph, u32 pin); +}; + /** * struct scmi_notify_ops - represents notifications' operations provided by * SCMI core @@ -750,8 +866,6 @@ struct scmi_notify_ops { const u32 *src_id, struct notifier_block *nb); int (*devm_event_notifier_unregister)(struct scmi_device *sdev, - u8 proto_id, u8 evt_id, - const u32 *src_id, struct notifier_block *nb); int (*event_notifier_register)(const struct scmi_handle *handle, u8 proto_id, u8 evt_id, @@ -811,6 +925,7 @@ enum scmi_std_protocol { SCMI_PROTOCOL_RESET = 0x16, SCMI_PROTOCOL_VOLTAGE = 0x17, SCMI_PROTOCOL_POWERCAP = 0x18, + SCMI_PROTOCOL_PINCTRL = 0x19, }; enum scmi_system_events { @@ -830,7 +945,7 @@ struct scmi_device { struct scmi_handle *handle; }; -#define to_scmi_dev(d) container_of(d, struct scmi_device, dev) +#define to_scmi_dev(d) container_of_const(d, struct scmi_device, dev) struct scmi_device_id { u8 protocol_id; @@ -940,6 +1055,8 @@ struct scmi_perf_limits_report { unsigned int domain_id; unsigned int range_max; unsigned int range_min; + unsigned long range_max_freq; + unsigned long range_min_freq; }; struct scmi_perf_level_report { @@ -947,6 +1064,7 @@ struct scmi_perf_level_report { unsigned int agent_id; unsigned int domain_id; unsigned int performance_level; + unsigned long performance_level_freq; }; struct scmi_sensor_trip_point_report { |