summaryrefslogtreecommitdiff
path: root/include/linux/regmap.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/regmap.h')
-rw-r--r--include/linux/regmap.h69
1 files changed, 67 insertions, 2 deletions
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 56af22ec9aba..7f7e00df3adf 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -14,12 +14,14 @@
*/
#include <linux/list.h>
+#include <linux/rbtree.h>
struct module;
struct device;
struct i2c_client;
struct spi_device;
struct regmap;
+struct regmap_range_cfg;
/* An enum of all the supported cache types */
enum regcache_type {
@@ -43,6 +45,14 @@ struct reg_default {
#ifdef CONFIG_REGMAP
+enum regmap_endian {
+ /* Unspecified -> 0 -> Backwards compatible default */
+ REGMAP_ENDIAN_DEFAULT = 0,
+ REGMAP_ENDIAN_BIG,
+ REGMAP_ENDIAN_LITTLE,
+ REGMAP_ENDIAN_NATIVE,
+};
+
/**
* Configuration for the register map of a device.
*
@@ -84,6 +94,15 @@ struct reg_default {
* @reg_defaults_raw: Power on reset values for registers (for use with
* register cache support).
* @num_reg_defaults_raw: Number of elements in reg_defaults_raw.
+ * @reg_format_endian: Endianness for formatted register addresses. If this is
+ * DEFAULT, the @reg_format_endian_default value from the
+ * regmap bus is used.
+ * @val_format_endian: Endianness for formatted register values. If this is
+ * DEFAULT, the @reg_format_endian_default value from the
+ * regmap bus is used.
+ *
+ * @ranges: Array of configuration entries for virtual address ranges.
+ * @num_ranges: Number of range configuration entries.
*/
struct regmap_config {
const char *name;
@@ -109,6 +128,43 @@ struct regmap_config {
u8 write_flag_mask;
bool use_single_rw;
+
+ enum regmap_endian reg_format_endian;
+ enum regmap_endian val_format_endian;
+
+ const struct regmap_range_cfg *ranges;
+ unsigned int n_ranges;
+};
+
+/**
+ * Configuration for indirectly accessed or paged registers.
+ * Registers, mapped to this virtual range, are accessed in two steps:
+ * 1. page selector register update;
+ * 2. access through data window registers.
+ *
+ * @range_min: Address of the lowest register address in virtual range.
+ * @range_max: Address of the highest register in virtual range.
+ *
+ * @page_sel_reg: Register with selector field.
+ * @page_sel_mask: Bit shift for selector value.
+ * @page_sel_shift: Bit mask for selector value.
+ *
+ * @window_start: Address of first (lowest) register in data window.
+ * @window_len: Number of registers in data window.
+ */
+struct regmap_range_cfg {
+ /* Registers of virtual address range */
+ unsigned int range_min;
+ unsigned int range_max;
+
+ /* Page selector for indirect addressing */
+ unsigned int selector_reg;
+ unsigned int selector_mask;
+ int selector_shift;
+
+ /* Data window (per each page) */
+ unsigned int window_start;
+ unsigned int window_len;
};
typedef int (*regmap_hw_write)(void *context, const void *data,
@@ -133,6 +189,12 @@ typedef void (*regmap_hw_free_context)(void *context);
* data.
* @read_flag_mask: Mask to be set in the top byte of the register when doing
* a read.
+ * @reg_format_endian_default: Default endianness for formatted register
+ * addresses. Used when the regmap_config specifies DEFAULT. If this is
+ * DEFAULT, BIG is assumed.
+ * @val_format_endian_default: Default endianness for formatted register
+ * values. Used when the regmap_config specifies DEFAULT. If this is
+ * DEFAULT, BIG is assumed.
*/
struct regmap_bus {
bool fast_io;
@@ -141,6 +203,8 @@ struct regmap_bus {
regmap_hw_read read;
regmap_hw_free_context free_context;
u8 read_flag_mask;
+ enum regmap_endian reg_format_endian_default;
+ enum regmap_endian val_format_endian_default;
};
struct regmap *regmap_init(struct device *dev,
@@ -219,6 +283,7 @@ struct regmap_irq {
* @status_base: Base status register address.
* @mask_base: Base mask register address.
* @ack_base: Base ack address. If zero then the chip is clear on read.
+ * @wake_base: Base address for wake enables. If zero unsupported.
* @irq_reg_stride: Stride to use for chips where registers are not contiguous.
*
* @num_regs: Number of registers in each control bank.
@@ -232,6 +297,7 @@ struct regmap_irq_chip {
unsigned int status_base;
unsigned int mask_base;
unsigned int ack_base;
+ unsigned int wake_base;
unsigned int irq_reg_stride;
int num_regs;
@@ -243,7 +309,7 @@ struct regmap_irq_chip {
struct regmap_irq_chip_data;
int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
- int irq_base, struct regmap_irq_chip *chip,
+ int irq_base, const struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data);
void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data);
@@ -361,7 +427,6 @@ static inline int regmap_register_patch(struct regmap *map,
static inline struct regmap *dev_get_regmap(struct device *dev,
const char *name)
{
- WARN_ONCE(1, "regmap API is disabled");
return NULL;
}