diff options
Diffstat (limited to 'include/linux/phy.h')
-rw-r--r-- | include/linux/phy.h | 109 |
1 files changed, 50 insertions, 59 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h index 43a774873aa9..e76e4adbc7c7 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -217,6 +217,13 @@ struct mii_bus { * matching its address */ int irq[PHY_MAX_ADDR]; + + /* GPIO reset pulse width in microseconds */ + int reset_delay_us; + /* Number of reset GPIOs */ + int num_reset_gpios; + /* Array of RESET GPIO descriptors */ + struct gpio_desc **reset_gpiod; }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) @@ -587,23 +594,29 @@ struct phy_driver { */ void (*link_change_notify)(struct phy_device *dev); - /* A function provided by a phy specific driver to override the - * the PHY driver framework support for reading a MMD register - * from the PHY. If not supported, return -1. This function is - * optional for PHY specific drivers, if not provided then the - * default MMD read function is used by the PHY framework. + /* + * Phy specific driver override for reading a MMD register. + * This function is optional for PHY specific drivers. When + * not provided, the default MMD read function will be used + * by phy_read_mmd(), which will use either a direct read for + * Clause 45 PHYs or an indirect read for Clause 22 PHYs. + * devnum is the MMD device number within the PHY device, + * regnum is the register within the selected MMD device. */ - int (*read_mmd_indirect)(struct phy_device *dev, int ptrad, - int devnum, int regnum); - - /* A function provided by a phy specific driver to override the - * the PHY driver framework support for writing a MMD register - * from the PHY. This function is optional for PHY specific drivers, - * if not provided then the default MMD read function is used by - * the PHY framework. + int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum); + + /* + * Phy specific driver override for writing a MMD register. + * This function is optional for PHY specific drivers. When + * not provided, the default MMD write function will be used + * by phy_write_mmd(), which will use either a direct write for + * Clause 45 PHYs, or an indirect write for Clause 22 PHYs. + * devnum is the MMD device number within the PHY device, + * regnum is the register within the selected MMD device. + * val is the value to be written. */ - void (*write_mmd_indirect)(struct phy_device *dev, int ptrad, - int devnum, int regnum, u32 val); + int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, + u16 val); /* Get the size and type of the eeprom contained within a plug-in * module */ @@ -651,25 +664,7 @@ struct phy_fixup { * * Same rules as for phy_read(); */ -static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum) -{ - if (!phydev->is_c45) - return -EOPNOTSUPP; - - return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, - MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff)); -} - -/** - * phy_read_mmd_indirect - reads data from the MMD registers - * @phydev: The PHY device bus - * @prtad: MMD Address - * @addr: PHY address on the MII bus - * - * Description: it reads data from the MMD registers (clause 22 to access to - * clause 45) of the specified phy address. - */ -int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad); +int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); /** * phy_read - Convenience function for reading a given PHY register @@ -752,35 +747,29 @@ static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev) * * Same rules as for phy_write(); */ -static inline int phy_write_mmd(struct phy_device *phydev, int devad, - u32 regnum, u16 val) -{ - if (!phydev->is_c45) - return -EOPNOTSUPP; - - regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff); - - return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); -} - -/** - * phy_write_mmd_indirect - writes data to the MMD registers - * @phydev: The PHY device - * @prtad: MMD Address - * @devad: MMD DEVAD - * @data: data to write in the MMD register - * - * Description: Write data from the MMD registers of the specified - * phy address. - */ -void phy_write_mmd_indirect(struct phy_device *phydev, int prtad, - int devad, u32 data); +int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, bool is_c45, struct phy_c45_device_ids *c45_ids); +#if IS_ENABLED(CONFIG_PHYLIB) struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); +void phy_device_free(struct phy_device *phydev); +#else +static inline +struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) +{ + return NULL; +} + +static inline int phy_device_register(struct phy_device *phy) +{ + return 0; +} + +static inline void phy_device_free(struct phy_device *phydev) { } +#endif /* CONFIG_PHYLIB */ void phy_device_remove(struct phy_device *phydev); int phy_init_hw(struct phy_device *phydev); int phy_suspend(struct phy_device *phydev); @@ -852,6 +841,7 @@ void phy_change_work(struct work_struct *work); void phy_mac_interrupt(struct phy_device *phydev, int new_link); void phy_start_machine(struct phy_device *phydev); void phy_stop_machine(struct phy_device *phydev); +void phy_trigger_machine(struct phy_device *phydev, bool sync); int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); int phy_ethtool_ksettings_get(struct phy_device *phydev, @@ -861,7 +851,6 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev, int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); int phy_start_interrupts(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); -void phy_device_free(struct phy_device *phydev); int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, @@ -888,8 +877,10 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd); int phy_ethtool_nway_reset(struct net_device *ndev); +#if IS_ENABLED(CONFIG_PHYLIB) int __init mdio_bus_init(void); void mdio_bus_exit(void); +#endif extern struct bus_type mdio_bus_type; @@ -900,7 +891,7 @@ struct mdio_board_info { const void *platform_data; }; -#if IS_ENABLED(CONFIG_PHYLIB) +#if IS_ENABLED(CONFIG_MDIO_DEVICE) int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned int n); #else |