diff options
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/card.h | 7 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 10 | ||||
| -rw-r--r-- | include/linux/mmc/mmc.h | 1 | ||||
| -rw-r--r-- | include/linux/mmc/pm.h | 30 | ||||
| -rw-r--r-- | include/linux/mmc/sdhci-spear.h | 42 | ||||
| -rw-r--r-- | include/linux/mmc/sdio.h | 4 | ||||
| -rw-r--r-- | include/linux/mmc/sdio_func.h | 8 | ||||
| -rw-r--r-- | include/linux/mmc/sh_mmcif.h | 39 |
8 files changed, 140 insertions, 1 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 2ee22e8af110..d02d2c6e0cfe 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -99,6 +99,8 @@ struct mmc_card { #define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ +#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ + /* for byte mode */ u32 raw_cid[4]; /* raw card CID */ u32 raw_csd[4]; /* raw card CSD */ @@ -139,6 +141,11 @@ static inline int mmc_card_lenient_fn0(const struct mmc_card *c) return c->quirks & MMC_QUIRK_LENIENT_FN0; } +static inline int mmc_blksz_for_byte_mode(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; +} + #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) (dev_name(&(c)->dev)) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index eaf36364b7d4..f65913c9f5a4 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -14,6 +14,7 @@ #include <linux/sched.h> #include <linux/mmc/core.h> +#include <linux/mmc/pm.h> struct mmc_ios { unsigned int clock; /* clock rate */ @@ -107,6 +108,9 @@ struct mmc_host_ops { int (*get_cd)(struct mmc_host *host); void (*enable_sdio_irq)(struct mmc_host *host, int enable); + + /* optional callback for HC quirks */ + void (*init_card)(struct mmc_host *host, struct mmc_card *card); }; struct mmc_card; @@ -152,6 +156,8 @@ struct mmc_host { #define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ #define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ + mmc_pm_flag_t pm_caps; /* supported pm features */ + /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ unsigned short max_hw_segs; /* see blk_queue_max_hw_segments */ @@ -197,6 +203,8 @@ struct mmc_host { struct task_struct *sdio_irq_thread; atomic_t sdio_irq_thread_abort; + mmc_pm_flag_t pm_flags; /* requested pm features */ + #ifdef CONFIG_LEDS_TRIGGERS struct led_trigger *led; /* activity led */ #endif @@ -222,7 +230,7 @@ static inline void *mmc_priv(struct mmc_host *host) #define mmc_classdev(x) (&(x)->class_dev) #define mmc_hostname(x) (dev_name(&(x)->class_dev)) -extern int mmc_suspend_host(struct mmc_host *, pm_message_t); +extern int mmc_suspend_host(struct mmc_host *); extern int mmc_resume_host(struct mmc_host *); extern void mmc_power_save_host(struct mmc_host *host); diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index c02c8db73701..8a49cbf0376d 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -268,6 +268,7 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ +#define EXT_CSD_CARD_TYPE_MASK 0x3 /* Mask out reserved and DDR bits */ #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ diff --git a/include/linux/mmc/pm.h b/include/linux/mmc/pm.h new file mode 100644 index 000000000000..d37aac49cf9a --- /dev/null +++ b/include/linux/mmc/pm.h @@ -0,0 +1,30 @@ +/* + * linux/include/linux/mmc/pm.h + * + * Author: Nicolas Pitre + * Copyright: (C) 2009 Marvell Technology Group Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef LINUX_MMC_PM_H +#define LINUX_MMC_PM_H + +/* + * These flags are used to describe power management features that + * some cards (typically SDIO cards) might wish to benefit from when + * the host system is being suspended. There are several layers of + * abstractions involved, from the host controller driver, to the MMC core + * code, to the SDIO core code, to finally get to the actual SDIO function + * driver. This file is therefore used for common definitions shared across + * all those layers. + */ + +typedef unsigned int mmc_pm_flag_t; + +#define MMC_PM_KEEP_POWER (1 << 0) /* preserve card power during suspend */ +#define MMC_PM_WAKE_SDIO_IRQ (1 << 1) /* wake up host system on SDIO IRQ assertion */ + +#endif diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h new file mode 100644 index 000000000000..9188c973f3e1 --- /dev/null +++ b/include/linux/mmc/sdhci-spear.h @@ -0,0 +1,42 @@ +/* + * include/linux/mmc/sdhci-spear.h + * + * SDHCI declarations specific to ST SPEAr platform + * + * Copyright (C) 2010 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef MMC_SDHCI_SPEAR_H +#define MMC_SDHCI_SPEAR_H + +#include <linux/platform_device.h> +/* + * struct sdhci_plat_data: spear sdhci platform data structure + * + * @card_power_gpio: gpio pin for enabling/disabling power to sdhci socket + * @power_active_high: if set, enable power to sdhci socket by setting + * card_power_gpio + * @power_always_enb: If set, then enable power on probe, otherwise enable only + * on card insertion and disable on card removal. + * card_int_gpio: gpio pin used for card detection + */ +struct sdhci_plat_data { + int card_power_gpio; + int power_active_high; + int power_always_enb; + int card_int_gpio; +}; + +/* This function is used to set platform_data field of pdev->dev */ +static inline void +sdhci_set_plat_data(struct platform_device *pdev, struct sdhci_plat_data *data) +{ + pdev->dev.platform_data = data; +} + +#endif /* MMC_SDHCI_SPEAR_H */ diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index 47ba464f5170..329a8faa6e37 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -94,6 +94,10 @@ #define SDIO_BUS_WIDTH_1BIT 0x00 #define SDIO_BUS_WIDTH_4BIT 0x02 +#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */ +#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */ + +#define SDIO_BUS_ASYNC_INT 0x20 #define SDIO_BUS_CD_DISABLE 0x80 /* disable pull-up on DAT3 (pin 1) */ diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index ac3ab683fec6..31baaf82f458 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -15,6 +15,8 @@ #include <linux/device.h> #include <linux/mod_devicetable.h> +#include <linux/mmc/pm.h> + struct mmc_card; struct sdio_func; @@ -143,6 +145,9 @@ extern void sdio_writew(struct sdio_func *func, u16 b, extern void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret); +extern u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte, + unsigned int addr, int *err_ret); + extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr, void *src, int count); extern int sdio_writesb(struct sdio_func *func, unsigned int addr, @@ -153,5 +158,8 @@ extern unsigned char sdio_f0_readb(struct sdio_func *func, extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b, unsigned int addr, int *err_ret); +extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func); +extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags); + #endif diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h new file mode 100644 index 000000000000..aafe832f18aa --- /dev/null +++ b/include/linux/mmc/sh_mmcif.h @@ -0,0 +1,39 @@ +/* + * include/linux/mmc/sh_mmcif.h + * + * platform data for eMMC driver + * + * Copyright (C) 2010 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + */ + +#ifndef __SH_MMCIF_H__ +#define __SH_MMCIF_H__ + +/* + * MMCIF : CE_CLK_CTRL [19:16] + * 1000 : Peripheral clock / 512 + * 0111 : Peripheral clock / 256 + * 0110 : Peripheral clock / 128 + * 0101 : Peripheral clock / 64 + * 0100 : Peripheral clock / 32 + * 0011 : Peripheral clock / 16 + * 0010 : Peripheral clock / 8 + * 0001 : Peripheral clock / 4 + * 0000 : Peripheral clock / 2 + * 1111 : Peripheral clock (sup_pclk set '1') + */ + +struct sh_mmcif_plat_data { + void (*set_pwr)(struct platform_device *pdev, int state); + void (*down_pwr)(struct platform_device *pdev); + u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ + unsigned long caps; + u32 ocr; +}; + +#endif /* __SH_MMCIF_H__ */ |