diff options
Diffstat (limited to 'include/linux/mfd/wm8994')
| -rw-r--r-- | include/linux/mfd/wm8994/pdata.h | 23 | ||||
| -rw-r--r-- | include/linux/mfd/wm8994/registers.h | 16 |
2 files changed, 39 insertions, 0 deletions
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index b00897a6c461..3fb1f407d5e6 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -113,6 +113,23 @@ struct wm8958_enh_eq_cfg { u16 regs[WM8958_ENH_EQ_REGS]; }; +/** + * Microphone detection rates, used to tune response rates and power + * consumption for WM8958/WM1811 microphone detection. + * + * @sysclk: System clock rate to use this configuration for. + * @idle: True if this configuration should use when no accessory is detected, + * false otherwise. + * @start: Value for MICD_BIAS_START_TIME register field (not shifted). + * @rate: Value for MICD_RATE register field (not shifted). + */ +struct wm8958_micd_rate { + int sysclk; + bool idle; + int start; + int rate; +}; + struct wm8994_pdata { int gpio_base; @@ -144,6 +161,9 @@ struct wm8994_pdata { int num_enh_eq_cfgs; struct wm8958_enh_eq_cfg *enh_eq_cfgs; + int num_micd_rates; + struct wm8958_micd_rate *micd_rates; + /* LINEOUT can be differential or single ended */ unsigned int lineout1_diff:1; unsigned int lineout2_diff:1; @@ -168,6 +188,9 @@ struct wm8994_pdata { /* WM8958 microphone bias configuration */ int micbias[2]; + /* WM8958 microphone detection ranges */ + u16 micd_lvl_sel; + /* Disable the internal pull downs on the LDOs if they are * always driven (eg, connected to an always on supply or * GPIO that always drives an output. If they float power diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h index 8317b19a4972..86e6a032a078 100644 --- a/include/linux/mfd/wm8994/registers.h +++ b/include/linux/mfd/wm8994/registers.h @@ -250,6 +250,7 @@ #define WM8994_GPIO_4 0x703 #define WM8994_GPIO_5 0x704 #define WM8994_GPIO_6 0x705 +#define WM1811_JACKDET_CTRL 0x705 #define WM8994_GPIO_7 0x706 #define WM8994_GPIO_8 0x707 #define WM8994_GPIO_9 0x708 @@ -1904,6 +1905,9 @@ /* * R57 (0x39) - AntiPOP (2) */ +#define WM1811_JACKDET_MODE_MASK 0x0180 /* JACKDET_MODE - [8:7] */ +#define WM1811_JACKDET_MODE_SHIFT 7 /* JACKDET_MODE - [8:7] */ +#define WM1811_JACKDET_MODE_WIDTH 2 /* JACKDET_MODE - [8:7] */ #define WM8994_MICB2_DISCH 0x0100 /* MICB2_DISCH */ #define WM8994_MICB2_DISCH_MASK 0x0100 /* MICB2_DISCH */ #define WM8994_MICB2_DISCH_SHIFT 8 /* MICB2_DISCH */ @@ -4283,6 +4287,18 @@ #define WM8994_STL_SEL_WIDTH 1 /* STL_SEL */ /* + * R1797 (0x705) - JACKDET Ctrl + */ +#define WM1811_JACKDET_DB 0x0100 /* JACKDET_DB */ +#define WM1811_JACKDET_DB_MASK 0x0100 /* JACKDET_DB */ +#define WM1811_JACKDET_DB_SHIFT 8 /* JACKDET_DB */ +#define WM1811_JACKDET_DB_WIDTH 1 /* JACKDET_DB */ +#define WM1811_JACKDET_LVL 0x0040 /* JACKDET_LVL */ +#define WM1811_JACKDET_LVL_MASK 0x0040 /* JACKDET_LVL */ +#define WM1811_JACKDET_LVL_SHIFT 6 /* JACKDET_LVL */ +#define WM1811_JACKDET_LVL_WIDTH 1 /* JACKDET_LVL */ + +/* * R1824 (0x720) - Pull Control (1) */ #define WM8994_DMICDAT2_PU 0x0800 /* DMICDAT2_PU */ |