1 files changed, 0 insertions, 44 deletions
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index c9d869027300..cb83883918a7 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -118,47 +118,6 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
 #define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
 
 /**
- * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
- * data
- * @sample_time: ADC converstion time in number of clock.
- * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
- * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
- * recommended is 4.
- * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
- * @ref_sel: ADC reference source
- * (0 -> internal reference, 1 -> external reference)
- * @adc_freq: ADC Clock speed
- * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
- * @ave_ctrl: Sample average control
- * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
- * @touch_det_delay: Touch detect interrupt delay
- * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
- * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
- * recommended is 3
- * @settling: Panel driver settling time
- * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
- * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
- * recommended is 2
- * @fraction_z: Length of the fractional part in z
- * (fraction_z ([0..7]) = Count of the fractional part)
- * recommended is 7
- * @i_drive: current limit value of the touchscreen drivers
- * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
- *
- * */
-struct stmpe_ts_platform_data {
-       u8 sample_time;
-       u8 mod_12b;
-       u8 ref_sel;
-       u8 adc_freq;
-       u8 ave_ctrl;
-       u8 touch_det_delay;
-       u8 settling;
-       u8 fraction_z;
-       u8 i_drive;
-};
-
-/**
  * struct stmpe_platform_data - STMPE platform data
  * @id: device id to distinguish between multiple STMPEs on the same board
  * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
@@ -168,7 +127,6 @@ struct stmpe_ts_platform_data {
  * @irq_over_gpio: true if gpio is used to get irq
  * @irq_gpio: gpio number over which irq will be requested (significant only if
  *	      irq_over_gpio is true)
- * @ts: touchscreen-specific platform data
  */
 struct stmpe_platform_data {
 	int id;
@@ -178,8 +136,6 @@ struct stmpe_platform_data {
 	bool irq_over_gpio;
 	int irq_gpio;
 	int autosleep_timeout;
-
-	struct stmpe_ts_platform_data *ts;
 };
 
 #endif