diff options
Diffstat (limited to 'include/linux/mfd/rtsx_pci.h')
| -rw-r--r-- | include/linux/mfd/rtsx_pci.h | 794 |
1 files changed, 794 insertions, 0 deletions
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h new file mode 100644 index 000000000000..060b721fcbfb --- /dev/null +++ b/include/linux/mfd/rtsx_pci.h @@ -0,0 +1,794 @@ +/* Driver for Realtek PCI-Express card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Wei WANG <wei_wang@realsil.com.cn> + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTSX_PCI_H +#define __RTSX_PCI_H + +#include <linux/sched.h> +#include <linux/pci.h> + +#include "rtsx_common.h" + +#define MAX_RW_REG_CNT 1024 + +/* PCI Operation Register Address */ +#define RTSX_HCBAR 0x00 +#define RTSX_HCBCTLR 0x04 +#define RTSX_HDBAR 0x08 +#define RTSX_HDBCTLR 0x0C +#define RTSX_HAIMR 0x10 +#define RTSX_BIPR 0x14 +#define RTSX_BIER 0x18 + +/* Host command buffer control register */ +#define STOP_CMD (0x01 << 28) + +/* Host data buffer control register */ +#define SDMA_MODE 0x00 +#define ADMA_MODE (0x02 << 26) +#define STOP_DMA (0x01 << 28) +#define TRIG_DMA (0x01 << 31) + +/* Host access internal memory register */ +#define HAIMR_TRANS_START (0x01 << 31) +#define HAIMR_READ 0x00 +#define HAIMR_WRITE (0x01 << 30) +#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ) +#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE) +#define HAIMR_TRANS_END (HAIMR_TRANS_START) + +/* Bus interrupt pending register */ +#define CMD_DONE_INT (1 << 31) +#define DATA_DONE_INT (1 << 30) +#define TRANS_OK_INT (1 << 29) +#define TRANS_FAIL_INT (1 << 28) +#define XD_INT (1 << 27) +#define MS_INT (1 << 26) +#define SD_INT (1 << 25) +#define GPIO0_INT (1 << 24) +#define OC_INT (1 << 23) +#define SD_WRITE_PROTECT (1 << 19) +#define XD_EXIST (1 << 18) +#define MS_EXIST (1 << 17) +#define SD_EXIST (1 << 16) +#define DELINK_INT GPIO0_INT +#define MS_OC_INT (1 << 23) +#define SD_OC_INT (1 << 22) + +#define CARD_INT (XD_INT | MS_INT | SD_INT) +#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT) +#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \ + CARD_INT | GPIO0_INT | OC_INT) + +#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST) + +/* Bus interrupt enable register */ +#define CMD_DONE_INT_EN (1 << 31) +#define DATA_DONE_INT_EN (1 << 30) +#define TRANS_OK_INT_EN (1 << 29) +#define TRANS_FAIL_INT_EN (1 << 28) +#define XD_INT_EN (1 << 27) +#define MS_INT_EN (1 << 26) +#define SD_INT_EN (1 << 25) +#define GPIO0_INT_EN (1 << 24) +#define OC_INT_EN (1 << 23) +#define DELINK_INT_EN GPIO0_INT_EN +#define MS_OC_INT_EN (1 << 23) +#define SD_OC_INT_EN (1 << 22) + +#define READ_REG_CMD 0 +#define WRITE_REG_CMD 1 +#define CHECK_REG_CMD 2 + +/* + * macros for easy use + */ +#define rtsx_pci_writel(pcr, reg, value) \ + iowrite32(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readl(pcr, reg) \ + ioread32((pcr)->remap_addr + reg) +#define rtsx_pci_writew(pcr, reg, value) \ + iowrite16(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readw(pcr, reg) \ + ioread16((pcr)->remap_addr + reg) +#define rtsx_pci_writeb(pcr, reg, value) \ + iowrite8(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readb(pcr, reg) \ + ioread8((pcr)->remap_addr + reg) + +#define rtsx_pci_read_config_byte(pcr, where, val) \ + pci_read_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_write_config_byte(pcr, where, val) \ + pci_write_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_read_config_dword(pcr, where, val) \ + pci_read_config_dword((pcr)->pci, where, val) + +#define rtsx_pci_write_config_dword(pcr, where, val) \ + pci_write_config_dword((pcr)->pci, where, val) + +#define STATE_TRANS_NONE 0 +#define STATE_TRANS_CMD 1 +#define STATE_TRANS_BUF 2 +#define STATE_TRANS_SG 3 + +#define TRANS_NOT_READY 0 +#define TRANS_RESULT_OK 1 +#define TRANS_RESULT_FAIL 2 +#define TRANS_NO_DEVICE 3 + +#define RTSX_RESV_BUF_LEN 4096 +#define HOST_CMDS_BUF_LEN 1024 +#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN) +#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8) +#define MAX_SG_ITEM_LEN 0x80000 + +#define HOST_TO_DEVICE 0 +#define DEVICE_TO_HOST 1 + +#define MAX_PHASE 31 +#define RX_TUNING_CNT 3 + +/* SG descriptor */ +#define SG_INT 0x04 +#define SG_END 0x02 +#define SG_VALID 0x01 + +#define SG_NO_OP 0x00 +#define SG_TRANS_DATA (0x02 << 4) +#define SG_LINK_DESC (0x03 << 4) + +/* SD bank voltage */ +#define SD_IO_3V3 0 +#define SD_IO_1V8 1 + + +/* Card Clock Enable Register */ +#define SD_CLK_EN 0x04 +#define MS_CLK_EN 0x08 + +/* Card Select Register */ +#define SD_MOD_SEL 2 +#define MS_MOD_SEL 3 + +/* Card Output Enable Register */ +#define SD_OUTPUT_EN 0x04 +#define MS_OUTPUT_EN 0x08 + +/* CARD_SHARE_MODE */ +#define CARD_SHARE_MASK 0x0F +#define CARD_SHARE_MULTI_LUN 0x00 +#define CARD_SHARE_NORMAL 0x00 +#define CARD_SHARE_48_SD 0x04 +#define CARD_SHARE_48_MS 0x08 +/* CARD_SHARE_MODE for barossa */ +#define CARD_SHARE_BAROSSA_SD 0x01 +#define CARD_SHARE_BAROSSA_MS 0x02 + +/* SD30_DRIVE_SEL */ +#define DRIVER_TYPE_A 0x05 +#define DRIVER_TYPE_B 0x03 +#define DRIVER_TYPE_C 0x02 +#define DRIVER_TYPE_D 0x01 + +/* FPDCTL */ +#define SSC_POWER_DOWN 0x01 +#define SD_OC_POWER_DOWN 0x02 +#define ALL_POWER_DOWN 0x07 +#define OC_POWER_DOWN 0x06 + +/* CLK_CTL */ +#define CHANGE_CLK 0x01 + +/* LDO_CTL */ +#define BPP_LDO_POWB 0x03 +#define BPP_LDO_ON 0x00 +#define BPP_LDO_SUSPEND 0x02 +#define BPP_LDO_OFF 0x03 + +/* CD_PAD_CTL */ +#define CD_DISABLE_MASK 0x07 +#define MS_CD_DISABLE 0x04 +#define SD_CD_DISABLE 0x02 +#define XD_CD_DISABLE 0x01 +#define CD_DISABLE 0x07 +#define CD_ENABLE 0x00 +#define MS_CD_EN_ONLY 0x03 +#define SD_CD_EN_ONLY 0x05 +#define XD_CD_EN_ONLY 0x06 +#define FORCE_CD_LOW_MASK 0x38 +#define FORCE_CD_XD_LOW 0x08 +#define FORCE_CD_SD_LOW 0x10 +#define FORCE_CD_MS_LOW 0x20 +#define CD_AUTO_DISABLE 0x40 + +/* SD_STAT1 */ +#define SD_CRC7_ERR 0x80 +#define SD_CRC16_ERR 0x40 +#define SD_CRC_WRITE_ERR 0x20 +#define SD_CRC_WRITE_ERR_MASK 0x1C +#define GET_CRC_TIME_OUT 0x02 +#define SD_TUNING_COMPARE_ERR 0x01 + +/* SD_STAT2 */ +#define SD_RSP_80CLK_TIMEOUT 0x01 + +/* SD_BUS_STAT */ +#define SD_CLK_TOGGLE_EN 0x80 +#define SD_CLK_FORCE_STOP 0x40 +#define SD_DAT3_STATUS 0x10 +#define SD_DAT2_STATUS 0x08 +#define SD_DAT1_STATUS 0x04 +#define SD_DAT0_STATUS 0x02 +#define SD_CMD_STATUS 0x01 + +/* SD_PAD_CTL */ +#define SD_IO_USING_1V8 0x80 +#define SD_IO_USING_3V3 0x7F +#define TYPE_A_DRIVING 0x00 +#define TYPE_B_DRIVING 0x01 +#define TYPE_C_DRIVING 0x02 +#define TYPE_D_DRIVING 0x03 + +/* SD_SAMPLE_POINT_CTL */ +#define DDR_FIX_RX_DAT 0x00 +#define DDR_VAR_RX_DAT 0x80 +#define DDR_FIX_RX_DAT_EDGE 0x00 +#define DDR_FIX_RX_DAT_14_DELAY 0x40 +#define DDR_FIX_RX_CMD 0x00 +#define DDR_VAR_RX_CMD 0x20 +#define DDR_FIX_RX_CMD_POS_EDGE 0x00 +#define DDR_FIX_RX_CMD_14_DELAY 0x10 +#define SD20_RX_POS_EDGE 0x00 +#define SD20_RX_14_DELAY 0x08 +#define SD20_RX_SEL_MASK 0x08 + +/* SD_PUSH_POINT_CTL */ +#define DDR_FIX_TX_CMD_DAT 0x00 +#define DDR_VAR_TX_CMD_DAT 0x80 +#define DDR_FIX_TX_DAT_14_TSU 0x00 +#define DDR_FIX_TX_DAT_12_TSU 0x40 +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 +#define DDR_FIX_TX_CMD_14_AHEAD 0x20 +#define SD20_TX_NEG_EDGE 0x00 +#define SD20_TX_14_AHEAD 0x10 +#define SD20_TX_SEL_MASK 0x10 +#define DDR_VAR_SDCLK_POL_SWAP 0x01 + +/* SD_TRANSFER */ +#define SD_TRANSFER_START 0x80 +#define SD_TRANSFER_END 0x40 +#define SD_STAT_IDLE 0x20 +#define SD_TRANSFER_ERR 0x10 +/* SD Transfer Mode definition */ +#define SD_TM_NORMAL_WRITE 0x00 +#define SD_TM_AUTO_WRITE_3 0x01 +#define SD_TM_AUTO_WRITE_4 0x02 +#define SD_TM_AUTO_READ_3 0x05 +#define SD_TM_AUTO_READ_4 0x06 +#define SD_TM_CMD_RSP 0x08 +#define SD_TM_AUTO_WRITE_1 0x09 +#define SD_TM_AUTO_WRITE_2 0x0A +#define SD_TM_NORMAL_READ 0x0C +#define SD_TM_AUTO_READ_1 0x0D +#define SD_TM_AUTO_READ_2 0x0E +#define SD_TM_AUTO_TUNING 0x0F + +/* SD_VPTX_CTL / SD_VPRX_CTL */ +#define PHASE_CHANGE 0x80 +#define PHASE_NOT_RESET 0x40 + +/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */ +#define DCMPS_CHANGE 0x80 +#define DCMPS_CHANGE_DONE 0x40 +#define DCMPS_ERROR 0x20 +#define DCMPS_CURRENT_PHASE 0x1F + +/* SD Configure 1 Register */ +#define SD_CLK_DIVIDE_0 0x00 +#define SD_CLK_DIVIDE_256 0xC0 +#define SD_CLK_DIVIDE_128 0x80 +#define SD_BUS_WIDTH_1BIT 0x00 +#define SD_BUS_WIDTH_4BIT 0x01 +#define SD_BUS_WIDTH_8BIT 0x02 +#define SD_ASYNC_FIFO_NOT_RST 0x10 +#define SD_20_MODE 0x00 +#define SD_DDR_MODE 0x04 +#define SD_30_MODE 0x08 + +#define SD_CLK_DIVIDE_MASK 0xC0 + +/* SD_CMD_STATE */ +#define SD_CMD_IDLE 0x80 + +/* SD_DATA_STATE */ +#define SD_DATA_IDLE 0x80 + +/* DCM_DRP_CTL */ +#define DCM_RESET 0x08 +#define DCM_LOCKED 0x04 +#define DCM_208M 0x00 +#define DCM_TX 0x01 +#define DCM_RX 0x02 + +/* DCM_DRP_TRIG */ +#define DRP_START 0x80 +#define DRP_DONE 0x40 + +/* DCM_DRP_CFG */ +#define DRP_WRITE 0x80 +#define DRP_READ 0x00 +#define DCM_WRITE_ADDRESS_50 0x50 +#define DCM_WRITE_ADDRESS_51 0x51 +#define DCM_READ_ADDRESS_00 0x00 +#define DCM_READ_ADDRESS_51 0x51 + +/* IRQSTAT0 */ +#define DMA_DONE_INT 0x80 +#define SUSPEND_INT 0x40 +#define LINK_RDY_INT 0x20 +#define LINK_DOWN_INT 0x10 + +/* DMACTL */ +#define DMA_RST 0x80 +#define DMA_BUSY 0x04 +#define DMA_DIR_TO_CARD 0x00 +#define DMA_DIR_FROM_CARD 0x02 +#define DMA_EN 0x01 +#define DMA_128 (0 << 4) +#define DMA_256 (1 << 4) +#define DMA_512 (2 << 4) +#define DMA_1024 (3 << 4) +#define DMA_PACK_SIZE_MASK 0x30 + +/* SSC_CTL1 */ +#define SSC_RSTB 0x80 +#define SSC_8X_EN 0x40 +#define SSC_FIX_FRAC 0x20 +#define SSC_SEL_1M 0x00 +#define SSC_SEL_2M 0x08 +#define SSC_SEL_4M 0x10 +#define SSC_SEL_8M 0x18 + +/* SSC_CTL2 */ +#define SSC_DEPTH_MASK 0x07 +#define SSC_DEPTH_DISALBE 0x00 +#define SSC_DEPTH_4M 0x01 +#define SSC_DEPTH_2M 0x02 +#define SSC_DEPTH_1M 0x03 +#define SSC_DEPTH_500K 0x04 +#define SSC_DEPTH_250K 0x05 + +/* System Clock Control Register */ +#define CLK_LOW_FREQ 0x01 + +/* System Clock Divider Register */ +#define CLK_DIV_1 0x01 +#define CLK_DIV_2 0x02 +#define CLK_DIV_4 0x03 +#define CLK_DIV_8 0x04 + +/* MS_CFG */ +#define SAMPLE_TIME_RISING 0x00 +#define SAMPLE_TIME_FALLING 0x80 +#define PUSH_TIME_DEFAULT 0x00 +#define PUSH_TIME_ODD 0x40 +#define NO_EXTEND_TOGGLE 0x00 +#define EXTEND_TOGGLE_CHK 0x20 +#define MS_BUS_WIDTH_1 0x00 +#define MS_BUS_WIDTH_4 0x10 +#define MS_BUS_WIDTH_8 0x18 +#define MS_2K_SECTOR_MODE 0x04 +#define MS_512_SECTOR_MODE 0x00 +#define MS_TOGGLE_TIMEOUT_EN 0x00 +#define MS_TOGGLE_TIMEOUT_DISEN 0x01 +#define MS_NO_CHECK_INT 0x02 + +/* MS_TRANS_CFG */ +#define WAIT_INT 0x80 +#define NO_WAIT_INT 0x00 +#define NO_AUTO_READ_INT_REG 0x00 +#define AUTO_READ_INT_REG 0x40 +#define MS_CRC16_ERR 0x20 +#define MS_RDY_TIMEOUT 0x10 +#define MS_INT_CMDNK 0x08 +#define MS_INT_BREQ 0x04 +#define MS_INT_ERR 0x02 +#define MS_INT_CED 0x01 + +/* MS_TRANSFER */ +#define MS_TRANSFER_START 0x80 +#define MS_TRANSFER_END 0x40 +#define MS_TRANSFER_ERR 0x20 +#define MS_BS_STATE 0x10 +#define MS_TM_READ_BYTES 0x00 +#define MS_TM_NORMAL_READ 0x01 +#define MS_TM_WRITE_BYTES 0x04 +#define MS_TM_NORMAL_WRITE 0x05 +#define MS_TM_AUTO_READ 0x08 +#define MS_TM_AUTO_WRITE 0x0C + +/* SD Configure 2 Register */ +#define SD_CALCULATE_CRC7 0x00 +#define SD_NO_CALCULATE_CRC7 0x80 +#define SD_CHECK_CRC16 0x00 +#define SD_NO_CHECK_CRC16 0x40 +#define SD_NO_CHECK_WAIT_CRC_TO 0x20 +#define SD_WAIT_BUSY_END 0x08 +#define SD_NO_WAIT_BUSY_END 0x00 +#define SD_CHECK_CRC7 0x00 +#define SD_NO_CHECK_CRC7 0x04 +#define SD_RSP_LEN_0 0x00 +#define SD_RSP_LEN_6 0x01 +#define SD_RSP_LEN_17 0x02 +/* SD/MMC Response Type Definition */ +#define SD_RSP_TYPE_R0 0x04 +#define SD_RSP_TYPE_R1 0x01 +#define SD_RSP_TYPE_R1b 0x09 +#define SD_RSP_TYPE_R2 0x02 +#define SD_RSP_TYPE_R3 0x05 +#define SD_RSP_TYPE_R4 0x05 +#define SD_RSP_TYPE_R5 0x01 +#define SD_RSP_TYPE_R6 0x01 +#define SD_RSP_TYPE_R7 0x01 + +/* SD_CONFIURE3 */ +#define SD_RSP_80CLK_TIMEOUT_EN 0x01 + +/* Card Transfer Reset Register */ +#define SPI_STOP 0x01 +#define XD_STOP 0x02 +#define SD_STOP 0x04 +#define MS_STOP 0x08 +#define SPI_CLR_ERR 0x10 +#define XD_CLR_ERR 0x20 +#define SD_CLR_ERR 0x40 +#define MS_CLR_ERR 0x80 + +/* Card Data Source Register */ +#define PINGPONG_BUFFER 0x01 +#define RING_BUFFER 0x00 + +/* Card Power Control Register */ +#define PMOS_STRG_MASK 0x10 +#define PMOS_STRG_800mA 0x10 +#define PMOS_STRG_400mA 0x00 +#define SD_POWER_OFF 0x03 +#define SD_PARTIAL_POWER_ON 0x01 +#define SD_POWER_ON 0x00 +#define SD_POWER_MASK 0x03 +#define MS_POWER_OFF 0x0C +#define MS_PARTIAL_POWER_ON 0x04 +#define MS_POWER_ON 0x00 +#define MS_POWER_MASK 0x0C +#define BPP_POWER_OFF 0x0F +#define BPP_POWER_5_PERCENT_ON 0x0E +#define BPP_POWER_10_PERCENT_ON 0x0C +#define BPP_POWER_15_PERCENT_ON 0x08 +#define BPP_POWER_ON 0x00 +#define BPP_POWER_MASK 0x0F + +/* PWR_GATE_CTRL */ +#define PWR_GATE_EN 0x01 +#define LDO3318_PWR_MASK 0x06 +#define LDO_ON 0x00 +#define LDO_SUSPEND 0x04 +#define LDO_OFF 0x06 + +/* CARD_CLK_SOURCE */ +#define CRC_FIX_CLK (0x00 << 0) +#define CRC_VAR_CLK0 (0x01 << 0) +#define CRC_VAR_CLK1 (0x02 << 0) +#define SD30_FIX_CLK (0x00 << 2) +#define SD30_VAR_CLK0 (0x01 << 2) +#define SD30_VAR_CLK1 (0x02 << 2) +#define SAMPLE_FIX_CLK (0x00 << 4) +#define SAMPLE_VAR_CLK0 (0x01 << 4) +#define SAMPLE_VAR_CLK1 (0x02 << 4) + +#define MS_CFG 0xFD40 +#define MS_TPC 0xFD41 +#define MS_TRANS_CFG 0xFD42 +#define MS_TRANSFER 0xFD43 +#define MS_INT_REG 0xFD44 +#define MS_BYTE_CNT 0xFD45 +#define MS_SECTOR_CNT_L 0xFD46 +#define MS_SECTOR_CNT_H 0xFD47 +#define MS_DBUS_H 0xFD48 + +#define SD_CFG1 0xFDA0 +#define SD_CFG2 0xFDA1 +#define SD_CFG3 0xFDA2 +#define SD_STAT1 0xFDA3 +#define SD_STAT2 0xFDA4 +#define SD_BUS_STAT 0xFDA5 +#define SD_PAD_CTL 0xFDA6 +#define SD_SAMPLE_POINT_CTL 0xFDA7 +#define SD_PUSH_POINT_CTL 0xFDA8 +#define SD_CMD0 0xFDA9 +#define SD_CMD1 0xFDAA +#define SD_CMD2 0xFDAB +#define SD_CMD3 0xFDAC +#define SD_CMD4 0xFDAD +#define SD_CMD5 0xFDAE +#define SD_BYTE_CNT_L 0xFDAF +#define SD_BYTE_CNT_H 0xFDB0 +#define SD_BLOCK_CNT_L 0xFDB1 +#define SD_BLOCK_CNT_H 0xFDB2 +#define SD_TRANSFER 0xFDB3 +#define SD_CMD_STATE 0xFDB5 +#define SD_DATA_STATE 0xFDB6 + +#define SRCTL 0xFC13 + +#define DCM_DRP_CTL 0xFC23 +#define DCM_DRP_TRIG 0xFC24 +#define DCM_DRP_CFG 0xFC25 +#define DCM_DRP_WR_DATA_L 0xFC26 +#define DCM_DRP_WR_DATA_H 0xFC27 +#define DCM_DRP_RD_DATA_L 0xFC28 +#define DCM_DRP_RD_DATA_H 0xFC29 +#define SD_VPCLK0_CTL 0xFC2A +#define SD_VPCLK1_CTL 0xFC2B +#define SD_DCMPS0_CTL 0xFC2C +#define SD_DCMPS1_CTL 0xFC2D +#define SD_VPTX_CTL SD_VPCLK0_CTL +#define SD_VPRX_CTL SD_VPCLK1_CTL +#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL +#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL +#define CARD_CLK_SOURCE 0xFC2E + +#define CARD_PWR_CTL 0xFD50 +#define CARD_CLK_SWITCH 0xFD51 +#define CARD_SHARE_MODE 0xFD52 +#define CARD_DRIVE_SEL 0xFD53 +#define CARD_STOP 0xFD54 +#define CARD_OE 0xFD55 +#define CARD_AUTO_BLINK 0xFD56 +#define CARD_GPIO_DIR 0xFD57 +#define CARD_GPIO 0xFD58 +#define CARD_DATA_SOURCE 0xFD5B +#define CARD_SELECT 0xFD5C +#define SD30_DRIVE_SEL 0xFD5E +#define CARD_CLK_EN 0xFD69 +#define SDIO_CTRL 0xFD6B +#define CD_PAD_CTL 0xFD73 + +#define FPDCTL 0xFC00 +#define PDINFO 0xFC01 + +#define CLK_CTL 0xFC02 +#define CLK_DIV 0xFC03 +#define CLK_SEL 0xFC04 + +#define SSC_DIV_N_0 0xFC0F +#define SSC_DIV_N_1 0xFC10 +#define SSC_CTL1 0xFC11 +#define SSC_CTL2 0xFC12 + +#define RCCTL 0xFC14 + +#define FPGA_PULL_CTL 0xFC1D +#define OLT_LED_CTL 0xFC1E +#define GPIO_CTL 0xFC1F + +#define LDO_CTL 0xFC1E +#define SYS_VER 0xFC32 + +#define CARD_PULL_CTL1 0xFD60 +#define CARD_PULL_CTL2 0xFD61 +#define CARD_PULL_CTL3 0xFD62 +#define CARD_PULL_CTL4 0xFD63 +#define CARD_PULL_CTL5 0xFD64 +#define CARD_PULL_CTL6 0xFD65 + +/* PCI Express Related Registers */ +#define IRQEN0 0xFE20 +#define IRQSTAT0 0xFE21 +#define IRQEN1 0xFE22 +#define IRQSTAT1 0xFE23 +#define TLPRIEN 0xFE24 +#define TLPRISTAT 0xFE25 +#define TLPTIEN 0xFE26 +#define TLPTISTAT 0xFE27 +#define DMATC0 0xFE28 +#define DMATC1 0xFE29 +#define DMATC2 0xFE2A +#define DMATC3 0xFE2B +#define DMACTL 0xFE2C +#define BCTL 0xFE2D +#define RBBC0 0xFE2E +#define RBBC1 0xFE2F +#define RBDAT 0xFE30 +#define RBCTL 0xFE34 +#define CFGADDR0 0xFE35 +#define CFGADDR1 0xFE36 +#define CFGDATA0 0xFE37 +#define CFGDATA1 0xFE38 +#define CFGDATA2 0xFE39 +#define CFGDATA3 0xFE3A +#define CFGRWCTL 0xFE3B +#define PHYRWCTL 0xFE3C +#define PHYDATA0 0xFE3D +#define PHYDATA1 0xFE3E +#define PHYADDR 0xFE3F +#define MSGRXDATA0 0xFE40 +#define MSGRXDATA1 0xFE41 +#define MSGRXDATA2 0xFE42 +#define MSGRXDATA3 0xFE43 +#define MSGTXDATA0 0xFE44 +#define MSGTXDATA1 0xFE45 +#define MSGTXDATA2 0xFE46 +#define MSGTXDATA3 0xFE47 +#define MSGTXCTL 0xFE48 +#define PETXCFG 0xFE49 + +#define CDRESUMECTL 0xFE52 +#define WAKE_SEL_CTL 0xFE54 +#define PME_FORCE_CTL 0xFE56 +#define ASPM_FORCE_CTL 0xFE57 +#define PM_CLK_FORCE_CTL 0xFE58 +#define PERST_GLITCH_WIDTH 0xFE5C +#define CHANGE_LINK_STATE 0xFE5B +#define RESET_LOAD_REG 0xFE5E +#define EFUSE_CONTENT 0xFE5F +#define HOST_SLEEP_STATE 0xFE60 +#define SDIO_CFG 0xFE70 + +#define NFTS_TX_CTRL 0xFE72 + +#define PWR_GATE_CTRL 0xFE75 +#define PWD_SUSPEND_EN 0xFE76 +#define LDO_PWR_SEL 0xFE78 + +#define DUMMY_REG_RESET_0 0xFE90 + +/* Memory mapping */ +#define SRAM_BASE 0xE600 +#define RBUF_BASE 0xF400 +#define PPBUF_BASE1 0xF800 +#define PPBUF_BASE2 0xFA00 +#define IMAGE_FLAG_ADDR0 0xCE80 +#define IMAGE_FLAG_ADDR1 0xCE81 + +#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0) + +struct rtsx_pcr; + +struct pcr_handle { + struct rtsx_pcr *pcr; +}; + +struct pcr_ops { + int (*extra_init_hw)(struct rtsx_pcr *pcr); + int (*optimize_phy)(struct rtsx_pcr *pcr); + int (*turn_on_led)(struct rtsx_pcr *pcr); + int (*turn_off_led)(struct rtsx_pcr *pcr); + int (*enable_auto_blink)(struct rtsx_pcr *pcr); + int (*disable_auto_blink)(struct rtsx_pcr *pcr); + int (*card_power_on)(struct rtsx_pcr *pcr, int card); + int (*card_power_off)(struct rtsx_pcr *pcr, int card); + unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr); +}; + +enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN}; + +struct rtsx_pcr { + struct pci_dev *pci; + unsigned int id; + + /* pci resources */ + unsigned long addr; + void __iomem *remap_addr; + int irq; + + /* host reserved buffer */ + void *rtsx_resv_buf; + dma_addr_t rtsx_resv_buf_addr; + + void *host_cmds_ptr; + dma_addr_t host_cmds_addr; + int ci; + + void *host_sg_tbl_ptr; + dma_addr_t host_sg_tbl_addr; + int sgi; + + u32 bier; + char trans_result; + + unsigned int card_inserted; + unsigned int card_removed; + + struct delayed_work carddet_work; + struct delayed_work idle_work; + + spinlock_t lock; + struct mutex pcr_mutex; + struct completion *done; + struct completion *finish_me; + + unsigned int cur_clock; + bool ms_pmos; + bool remove_pci; + bool msi_en; + +#define EXTRA_CAPS_SD_SDR50 (1 << 0) +#define EXTRA_CAPS_SD_SDR104 (1 << 1) +#define EXTRA_CAPS_SD_DDR50 (1 << 2) +#define EXTRA_CAPS_MMC_HSDDR (1 << 3) +#define EXTRA_CAPS_MMC_HS200 (1 << 4) +#define EXTRA_CAPS_MMC_8BIT (1 << 5) + u32 extra_caps; + +#define IC_VER_A 0 +#define IC_VER_B 1 +#define IC_VER_C 2 +#define IC_VER_D 3 + u8 ic_version; + + const u32 *sd_pull_ctl_enable_tbl; + const u32 *sd_pull_ctl_disable_tbl; + const u32 *ms_pull_ctl_enable_tbl; + const u32 *ms_pull_ctl_disable_tbl; + + const struct pcr_ops *ops; + enum PDEV_STAT state; + + int num_slots; + struct rtsx_slot *slots; +}; + +#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid)) +#define PCI_VID(pcr) ((pcr)->pci->vendor) +#define PCI_PID(pcr) ((pcr)->pci->device) + +void rtsx_pci_start_run(struct rtsx_pcr *pcr); +int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data); +int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data); +int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val); +int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val); +void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr); +void rtsx_pci_add_cmd(struct rtsx_pcr *pcr, + u8 cmd_type, u16 reg_addr, u8 mask, u8 data); +void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr); +int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout); +int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist, + int num_sg, bool read, int timeout); +int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, + u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); +int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card); +unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr); +void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr); + +static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr) +{ + return (u8 *)(pcr->host_cmds_ptr); +} + +#endif |