diff options
Diffstat (limited to 'include/linux/mfd/altera-a10sr.h')
| -rw-r--r-- | include/linux/mfd/altera-a10sr.h | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/include/linux/mfd/altera-a10sr.h b/include/linux/mfd/altera-a10sr.h new file mode 100644 index 000000000000..45a5e6e7db54 --- /dev/null +++ b/include/linux/mfd/altera-a10sr.h @@ -0,0 +1,85 @@ +/* + * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + * Declarations for Altera Arria10 MAX5 System Resource Chip + * + * Adapted from DA9052 + */ + +#ifndef __MFD_ALTERA_A10SR_H +#define __MFD_ALTERA_A10SR_H + +#include <linux/completion.h> +#include <linux/list.h> +#include <linux/mfd/core.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* Write registers are always on even addresses */ +#define WRITE_REG_MASK 0xFE +/* Odd registers are always on odd addresses */ +#define READ_REG_MASK 0x01 + +#define ALTR_A10SR_BITS_PER_REGISTER 8 +/* + * To find the correct register, we divide the input GPIO by + * the number of GPIO in each register. We then need to multiply + * by 2 because the reads are at odd addresses. + */ +#define ALTR_A10SR_REG_OFFSET(X) (((X) / ALTR_A10SR_BITS_PER_REGISTER) << 1) +#define ALTR_A10SR_REG_BIT(X) ((X) % ALTR_A10SR_BITS_PER_REGISTER) +#define ALTR_A10SR_REG_BIT_CHG(X, Y) ((X) << ALTR_A10SR_REG_BIT(Y)) +#define ALTR_A10SR_REG_BIT_MASK(X) (1 << ALTR_A10SR_REG_BIT(X)) + +/* Arria10 System Controller Register Defines */ +#define ALTR_A10SR_NOP 0x00 /* No Change */ +#define ALTR_A10SR_VERSION_READ 0x00 /* MAX5 Version Read */ + +#define ALTR_A10SR_LED_REG 0x02 /* LED - Upper 4 bits */ +/* LED register Bit Definitions */ +#define ALTR_A10SR_LED_VALID_SHIFT 4 /* LED - Upper 4 bits valid */ +#define ALTR_A10SR_OUT_VALID_RANGE_LO ALTR_A10SR_LED_VALID_SHIFT +#define ALTR_A10SR_OUT_VALID_RANGE_HI 7 + +#define ALTR_A10SR_PBDSW_REG 0x04 /* PB & DIP SW - Input only */ +#define ALTR_A10SR_PBDSW_IRQ_REG 0x06 /* PB & DIP SW Flag Clear */ +/* Pushbutton & DIP Switch Bit Definitions */ +#define ALTR_A10SR_IN_VALID_RANGE_LO 8 +#define ALTR_A10SR_IN_VALID_RANGE_HI 15 + +#define ALTR_A10SR_PWR_GOOD1_REG 0x08 /* Power Good1 Read */ +#define ALTR_A10SR_PWR_GOOD2_REG 0x0A /* Power Good2 Read */ +#define ALTR_A10SR_PWR_GOOD3_REG 0x0C /* Power Good3 Read */ +#define ALTR_A10SR_FMCAB_REG 0x0E /* FMCA/B & PCIe Pwr Enable */ +#define ALTR_A10SR_HPS_RST_REG 0x10 /* HPS Reset */ +#define ALTR_A10SR_USB_QSPI_REG 0x12 /* USB, BQSPI, FILE Reset */ +#define ALTR_A10SR_SFPA_REG 0x14 /* SFPA Control Reg */ +#define ALTR_A10SR_SFPB_REG 0x16 /* SFPB Control Reg */ +#define ALTR_A10SR_I2C_M_REG 0x18 /* I2C Master Select */ +#define ALTR_A10SR_WARM_RST_REG 0x1A /* HPS Warm Reset */ +#define ALTR_A10SR_WR_KEY_REG 0x1C /* HPS Warm Reset Key */ +#define ALTR_A10SR_PMBUS_REG 0x1E /* HPS PM Bus */ + +/** + * struct altr_a10sr - Altera Max5 MFD device private data structure + * @dev: : this device + * @regmap: the regmap assigned to the parent device. + */ +struct altr_a10sr { + struct device *dev; + struct regmap *regmap; +}; + +#endif /* __MFD_ALTERA_A10SR_H */ |