1 files changed, 20 insertions, 4 deletions

diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 6670c3d25c58..228bd44efa4c 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -37,6 +37,7 @@
 #define ST_SENSORS_DEFAULT_AXIS_ADDR		0x20
 #define ST_SENSORS_DEFAULT_AXIS_MASK		0x07
 #define ST_SENSORS_DEFAULT_AXIS_N_BIT		3
+#define ST_SENSORS_DEFAULT_STAT_ADDR		0x27
 
 #define ST_SENSORS_MAX_NAME			17
 #define ST_SENSORS_MAX_4WAI			7
@@ -121,6 +122,9 @@ struct st_sensor_bdu {
  * @mask_int2: mask to enable/disable IRQ on INT2 pin.
  * @addr_ihl: address to enable/disable active low on the INT lines.
  * @mask_ihl: mask to enable/disable active low on the INT lines.
+ * @addr_od: address to enable/disable Open Drain on the INT lines.
+ * @mask_od: mask to enable/disable Open Drain on the INT lines.
+ * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt
  * struct ig1 - represents the Interrupt Generator 1 of sensors.
  * @en_addr: address of the enable ig1 register.
  * @en_mask: mask to write the on/off value for enable.
@@ -131,6 +135,9 @@ struct st_sensor_data_ready_irq {
 	u8 mask_int2;
 	u8 addr_ihl;
 	u8 mask_ihl;
+	u8 addr_od;
+	u8 mask_od;
+	u8 addr_stat_drdy;
 	struct {
 		u8 en_addr;
 		u8 en_mask;
@@ -212,9 +219,13 @@ struct st_sensor_settings {
  * @odr: Output data rate of the sensor [Hz].
  * num_data_channels: Number of data channels used in buffer.
  * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
+ * @int_pin_open_drain: Set the interrupt/DRDY to open drain.
  * @get_irq_data_ready: Function to get the IRQ used for data ready signal.
  * @tf: Transfer function structure used by I/O operations.
  * @tb: Transfer buffers and mutex used by I/O operations.
+ * @edge_irq: the IRQ triggers on edges and need special handling.
+ * @hw_irq_trigger: if we're using the hardware interrupt on the sensor.
+ * @hw_timestamp: Latest timestamp from the interrupt handler, when in use.
  */
 struct st_sensor_data {
 	struct device *dev;
@@ -233,17 +244,20 @@ struct st_sensor_data {
 	unsigned int num_data_channels;
 
 	u8 drdy_int_pin;
+	bool int_pin_open_drain;
 
 	unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
 
 	const struct st_sensor_transfer_function *tf;
 	struct st_sensor_transfer_buffer tb;
+
+	bool edge_irq;
+	bool hw_irq_trigger;
+	s64 hw_timestamp;
 };
 
 #ifdef CONFIG_IIO_BUFFER
 irqreturn_t st_sensors_trigger_handler(int irq, void *p);
-
-int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
 #endif
 
 #ifdef CONFIG_IIO_TRIGGER
@@ -251,7 +265,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 				const struct iio_trigger_ops *trigger_ops);
 
 void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
-
+int st_sensors_validate_device(struct iio_trigger *trig,
+			       struct iio_dev *indio_dev);
 #else
 static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 				const struct iio_trigger_ops *trigger_ops)
@@ -262,6 +277,7 @@ static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
 {
 	return;
 }
+#define st_sensors_validate_device NULL
 #endif
 
 int st_sensors_init_sensor(struct iio_dev *indio_dev,
@@ -271,7 +287,7 @@ int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable);
 
 int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable);
 
-void st_sensors_power_enable(struct iio_dev *indio_dev);
+int st_sensors_power_enable(struct iio_dev *indio_dev);
 
 void st_sensors_power_disable(struct iio_dev *indio_dev);