diff options
Diffstat (limited to 'include/linux/ethtool.h')
| -rw-r--r-- | include/linux/ethtool.h | 292 |
1 files changed, 142 insertions, 150 deletions
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index c6e427ab65fe..da5b2de99ae4 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -117,99 +117,101 @@ struct ethtool_eeprom { __u8 data[0]; }; -/* for configuring coalescing parameters of chip */ +/** + * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates + * @cmd: ETHTOOL_{G,S}COALESCE + * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after + * a packet arrives. + * @rx_max_coalesced_frames: Maximum number of packets to receive + * before an RX interrupt. + * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after + * a packet is sent. + * @tx_max_coalesced_frames: Maximum number of packets to be sent + * before a TX interrupt. + * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @stats_block_coalesce_usecs: How many usecs to delay in-memory + * statistics block updates. Some drivers do not have an + * in-memory statistic block, and in such cases this value is + * ignored. This value must not be zero. + * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing. + * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing. + * @pkt_rate_low: Threshold for low packet rate (packets per second). + * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is below @pkt_rate_low. + * @rx_max_coalesced_frames_low: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is below @pkt_rate_low. + * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is below @pkt_rate_low. + * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before + * a TX interrupt, when the packet rate is below @pkt_rate_low. + * @pkt_rate_high: Threshold for high packet rate (packets per second). + * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is above @pkt_rate_high. + * @rx_max_coalesced_frames_high: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is above @pkt_rate_high. + * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is above @pkt_rate_high. + * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before + * a TX interrupt, when the packet rate is above @pkt_rate_high. + * @rate_sample_interval: How often to do adaptive coalescing packet rate + * sampling, measured in seconds. Must not be zero. + * + * Each pair of (usecs, max_frames) fields specifies this exit + * condition for interrupt coalescing: + * (usecs > 0 && time_since_first_completion >= usecs) || + * (max_frames > 0 && completed_frames >= max_frames) + * It is illegal to set both usecs and max_frames to zero as this + * would cause interrupts to never be generated. To disable + * coalescing, set usecs = 0 and max_frames = 1. + * + * Some implementations ignore the value of max_frames and use the + * condition: + * time_since_first_completion >= usecs + * This is deprecated. Drivers for hardware that does not support + * counting completions should validate that max_frames == !rx_usecs. + * + * Adaptive RX/TX coalescing is an algorithm implemented by some + * drivers to improve latency under low packet rates and improve + * throughput under high packet rates. Some drivers only implement + * one of RX or TX adaptive coalescing. Anything not implemented by + * the driver causes these values to be silently ignored. + * + * When the packet rate is below @pkt_rate_high but above + * @pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ struct ethtool_coalesce { - __u32 cmd; /* ETHTOOL_{G,S}COALESCE */ - - /* How many usecs to delay an RX interrupt after - * a packet arrives. If 0, only rx_max_coalesced_frames - * is used. - */ + __u32 cmd; __u32 rx_coalesce_usecs; - - /* How many packets to delay an RX interrupt after - * a packet arrives. If 0, only rx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause RX interrupts to never be - * generated. - */ __u32 rx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ __u32 rx_coalesce_usecs_irq; __u32 rx_max_coalesced_frames_irq; - - /* How many usecs to delay a TX interrupt after - * a packet is sent. If 0, only tx_max_coalesced_frames - * is used. - */ __u32 tx_coalesce_usecs; - - /* How many packets to delay a TX interrupt after - * a packet is sent. If 0, only tx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause TX interrupts to never be - * generated. - */ __u32 tx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ __u32 tx_coalesce_usecs_irq; __u32 tx_max_coalesced_frames_irq; - - /* How many usecs to delay in-memory statistics - * block updates. Some drivers do not have an in-memory - * statistic block, and in such cases this value is ignored. - * This value must not be zero. - */ __u32 stats_block_coalesce_usecs; - - /* Adaptive RX/TX coalescing is an algorithm implemented by - * some drivers to improve latency under low packet rates and - * improve throughput under high packet rates. Some drivers - * only implement one of RX or TX adaptive coalescing. Anything - * not implemented by the driver causes these values to be - * silently ignored. - */ __u32 use_adaptive_rx_coalesce; __u32 use_adaptive_tx_coalesce; - - /* When the packet rate (measured in packets per second) - * is below pkt_rate_low, the {rx,tx}_*_low parameters are - * used. - */ __u32 pkt_rate_low; __u32 rx_coalesce_usecs_low; __u32 rx_max_coalesced_frames_low; __u32 tx_coalesce_usecs_low; __u32 tx_max_coalesced_frames_low; - - /* When the packet rate is below pkt_rate_high but above - * pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ - - /* When the packet rate is (measured in packets per second) - * is above pkt_rate_high, the {rx,tx}_*_high parameters are - * used. - */ __u32 pkt_rate_high; __u32 rx_coalesce_usecs_high; __u32 rx_max_coalesced_frames_high; __u32 tx_coalesce_usecs_high; __u32 tx_max_coalesced_frames_high; - - /* How often to do adaptive coalescing packet rate sampling, - * measured in seconds. Must not be zero. - */ __u32 rate_sample_interval; }; @@ -444,7 +446,7 @@ struct ethtool_flow_ext { }; /** - * struct ethtool_rx_flow_spec - specification for RX flow filter + * struct ethtool_rx_flow_spec - classification rule for RX flows * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW * @h_u: Flow fields to match (dependent on @flow_type) * @h_ext: Additional fields to match @@ -454,7 +456,9 @@ struct ethtool_flow_ext { * includes the %FLOW_EXT flag. * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC * if packets should be discarded - * @location: Index of filter in hardware table + * @location: Location of rule in the table. Locations must be + * numbered such that a flow matching multiple rules will be + * classified according to the first (lowest numbered) rule. */ struct ethtool_rx_flow_spec { __u32 flow_type; @@ -473,9 +477,9 @@ struct ethtool_rx_flow_spec { * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW * @data: Command-dependent value - * @fs: Flow filter specification + * @fs: Flow classification rule * @rule_cnt: Number of rules to be affected - * @rule_locs: Array of valid rule indices + * @rule_locs: Array of used rule locations * * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following @@ -485,25 +489,38 @@ struct ethtool_rx_flow_spec { * on return. * * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined - * rules on return. + * rules on return. If @data is non-zero on return then it is the + * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the + * driver supports any special location values. If that flag is not + * set in @data then special location values should not be used. * - * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the index of an - * existing filter rule on entry and @fs contains the rule on return. + * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an + * existing rule on entry and @fs contains the rule on return. * * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the * user buffer for @rule_locs on entry. On return, @data is the size - * of the filter table and @rule_locs contains the indices of the - * defined rules. + * of the rule table, @rule_cnt is the number of defined rules, and + * @rule_locs contains the locations of the defined rules. Drivers + * must use the second parameter to get_rxnfc() instead of @rule_locs. * - * For %ETHTOOL_SRXCLSRLINS, @fs specifies the filter rule to add or - * update. @fs.@location specifies the index to use and must not be - * ignored. + * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update. + * @fs.@location either specifies the location to use or is a special + * location value with %RX_CLS_LOC_SPECIAL flag set. On return, + * @fs.@location is the actual rule location. * - * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the index of an - * existing filter rule on entry. + * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an + * existing rule on entry. * - * Implementation of indexed classification rules generally requires a - * TCAM. + * A driver supporting the special location values for + * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused + * location, and may remove a rule at a later location (lower + * priority) that matches exactly the same set of flows. The special + * values are: %RX_CLS_LOC_ANY, selecting any location; + * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum + * priority); and %RX_CLS_LOC_LAST, selecting the last suitable + * location (minimum priority). Additional special values may be + * defined in future and drivers must return -%EINVAL for any + * unrecognised value. */ struct ethtool_rxnfc { __u32 cmd; @@ -542,9 +559,15 @@ struct compat_ethtool_rxnfc { /** * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR - * @size: On entry, the array size of the user buffer. On return from - * %ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table. + * @size: On entry, the array size of the user buffer, which may be zero. + * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware + * indirection table. * @ring_index: RX ring/queue index for each hash value + * + * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size + * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means + * the table should be reset to default values. This last feature + * is not supported by the original implementations. */ struct ethtool_rxfh_indir { __u32 cmd; @@ -723,8 +746,8 @@ enum ethtool_sfeatures_retval_bits { #include <linux/rculist.h> -/* needed by dev_disable_lro() */ -extern int __ethtool_set_flags(struct net_device *dev, u32 flags); +extern int __ethtool_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd); /** * enum ethtool_phys_id_state - indicator state for physical identification @@ -746,19 +769,18 @@ struct net_device; /* Some generic methods drivers may use in their ethtool_ops */ u32 ethtool_op_get_link(struct net_device *dev); -u32 ethtool_op_get_tx_csum(struct net_device *dev); -int ethtool_op_set_tx_csum(struct net_device *dev, u32 data); -int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data); -int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data); -u32 ethtool_op_get_sg(struct net_device *dev); -int ethtool_op_set_sg(struct net_device *dev, u32 data); -u32 ethtool_op_get_tso(struct net_device *dev); -int ethtool_op_set_tso(struct net_device *dev, u32 data); -u32 ethtool_op_get_ufo(struct net_device *dev); -int ethtool_op_set_ufo(struct net_device *dev, u32 data); -u32 ethtool_op_get_flags(struct net_device *dev); -int ethtool_op_set_flags(struct net_device *dev, u32 data, u32 supported); -bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported); + +/** + * ethtool_rxfh_indir_default - get default value for RX flow hash indirection + * @index: Index in RX flow hash indirection table + * @n_rx_rings: Number of RX rings to use + * + * This function provides the default policy for RX flow hash indirection. + */ +static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings) +{ + return index % n_rx_rings; +} /** * struct ethtool_ops - optional netdev operations @@ -803,22 +825,6 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported); * @get_pauseparam: Report pause parameters * @set_pauseparam: Set pause parameters. Returns a negative error code * or zero. - * @get_rx_csum: Deprecated in favour of the netdev feature %NETIF_F_RXCSUM. - * Report whether receive checksums are turned on or off. - * @set_rx_csum: Deprecated in favour of generic netdev features. Turn - * receive checksum on or off. Returns a negative error code or zero. - * @get_tx_csum: Deprecated as redundant. Report whether transmit checksums - * are turned on or off. - * @set_tx_csum: Deprecated in favour of generic netdev features. Turn - * transmit checksums on or off. Returns a negative error code or zero. - * @get_sg: Deprecated as redundant. Report whether scatter-gather is - * enabled. - * @set_sg: Deprecated in favour of generic netdev features. Turn - * scatter-gather on or off. Returns a negative error code or zero. - * @get_tso: Deprecated as redundant. Report whether TCP segmentation - * offload is enabled. - * @set_tso: Deprecated in favour of generic netdev features. Turn TCP - * segmentation offload on or off. Returns a negative error code or zero. * @self_test: Run specified self-tests * @get_strings: Return a set of strings that describe the requested objects * @set_phys_id: Identify the physical devices, e.g. by flashing an LED @@ -840,15 +846,6 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported); * negative error code or zero. * @complete: Function to be called after any other operation except * @begin. Will be called even if the other operation failed. - * @get_ufo: Deprecated as redundant. Report whether UDP fragmentation - * offload is enabled. - * @set_ufo: Deprecated in favour of generic netdev features. Turn UDP - * fragmentation offload on or off. Returns a negative error code or zero. - * @get_flags: Deprecated as redundant. Report features included in - * &enum ethtool_flags that are enabled. - * @set_flags: Deprecated in favour of generic netdev features. Turn - * features included in &enum ethtool_flags on or off. Returns a - * negative error code or zero. * @get_priv_flags: Report driver-specific feature flags. * @set_priv_flags: Set driver-specific feature flags. Returns a negative * error code or zero. @@ -862,11 +859,13 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported); * @reset: Reset (part of) the device, as specified by a bitmask of * flags from &enum ethtool_reset_flags. Returns a negative * error code or zero. - * @set_rx_ntuple: Set an RX n-tuple rule. Returns a negative error code - * or zero. + * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table. + * Returns zero if not supported for this specific device. * @get_rxfh_indir: Get the contents of the RX flow hash indirection table. + * Will not be called if @get_rxfh_indir_size returns zero. * Returns a negative error code or zero. * @set_rxfh_indir: Set the contents of the RX flow hash indirection table. + * Will not be called if @get_rxfh_indir_size returns zero. * Returns a negative error code or zero. * @get_channels: Get number of channels. * @set_channels: Set number of channels. Returns a negative error code or @@ -913,14 +912,6 @@ struct ethtool_ops { struct ethtool_pauseparam*); int (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*); - u32 (*get_rx_csum)(struct net_device *); - int (*set_rx_csum)(struct net_device *, u32); - u32 (*get_tx_csum)(struct net_device *); - int (*set_tx_csum)(struct net_device *, u32); - u32 (*get_sg)(struct net_device *); - int (*set_sg)(struct net_device *, u32); - u32 (*get_tso)(struct net_device *); - int (*set_tso)(struct net_device *, u32); void (*self_test)(struct net_device *, struct ethtool_test *, u64 *); void (*get_strings)(struct net_device *, u32 stringset, u8 *); int (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state); @@ -928,24 +919,17 @@ struct ethtool_ops { struct ethtool_stats *, u64 *); int (*begin)(struct net_device *); void (*complete)(struct net_device *); - u32 (*get_ufo)(struct net_device *); - int (*set_ufo)(struct net_device *, u32); - u32 (*get_flags)(struct net_device *); - int (*set_flags)(struct net_device *, u32); u32 (*get_priv_flags)(struct net_device *); int (*set_priv_flags)(struct net_device *, u32); int (*get_sset_count)(struct net_device *, int); int (*get_rxnfc)(struct net_device *, - struct ethtool_rxnfc *, void *); + struct ethtool_rxnfc *, u32 *rule_locs); int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *); int (*flash_device)(struct net_device *, struct ethtool_flash *); int (*reset)(struct net_device *, u32 *); - int (*set_rx_ntuple)(struct net_device *, - struct ethtool_rx_ntuple *); - int (*get_rxfh_indir)(struct net_device *, - struct ethtool_rxfh_indir *); - int (*set_rxfh_indir)(struct net_device *, - const struct ethtool_rxfh_indir *); + u32 (*get_rxfh_indir_size)(struct net_device *); + int (*get_rxfh_indir)(struct net_device *, u32 *); + int (*set_rxfh_indir)(struct net_device *, const u32 *); void (*get_channels)(struct net_device *, struct ethtool_channels *); int (*set_channels)(struct net_device *, struct ethtool_channels *); int (*get_dump_flag)(struct net_device *, struct ethtool_dump *); @@ -1093,10 +1077,12 @@ struct ethtool_ops { #define SPEED_1000 1000 #define SPEED_2500 2500 #define SPEED_10000 10000 +#define SPEED_UNKNOWN -1 /* Duplex, half or full. */ #define DUPLEX_HALF 0x00 #define DUPLEX_FULL 0x01 +#define DUPLEX_UNKNOWN 0xff /* Which connector port. */ #define PORT_TP 0x00 @@ -1167,6 +1153,12 @@ struct ethtool_ops { #define RX_CLS_FLOW_DISC 0xffffffffffffffffULL +/* Special RX classification rule insert location values */ +#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */ +#define RX_CLS_LOC_ANY 0xffffffff +#define RX_CLS_LOC_FIRST 0xfffffffe +#define RX_CLS_LOC_LAST 0xfffffffd + /* Reset flags */ /* The reset() operation must clear the flags for the components which * were actually reset. On successful return, the flags indicate the |