diff options
Diffstat (limited to 'include/linux/brcmphy.h')
| -rw-r--r-- | include/linux/brcmphy.h | 137 |
1 files changed, 134 insertions, 3 deletions
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 61219b9b3445..7ccd928cc1f2 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -13,7 +13,11 @@ #define PHY_ID_BCM5461 0x002060c0 #define PHY_ID_BCM57780 0x03625d90 +#define PHY_ID_BCM7250 0xae025280 +#define PHY_ID_BCM7364 0xae025260 #define PHY_ID_BCM7366 0x600d8490 +#define PHY_ID_BCM7425 0x03625e60 +#define PHY_ID_BCM7429 0x600d8730 #define PHY_ID_BCM7439 0x600d8480 #define PHY_ID_BCM7445 0x600d8510 @@ -21,9 +25,9 @@ #define PHY_BCM_OUI_1 0x00206000 #define PHY_BCM_OUI_2 0x0143bc00 #define PHY_BCM_OUI_3 0x03625c00 -#define PHY_BCM_OUI_4 0x600d0000 +#define PHY_BCM_OUI_4 0x600d8400 #define PHY_BCM_OUI_5 0x03625e00 - +#define PHY_BCM_OUI_6 0xae025000 #define PHY_BCM_FLAGS_MODE_COPPER 0x00000001 #define PHY_BCM_FLAGS_MODE_1000BX 0x00000002 @@ -38,7 +42,8 @@ #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 /* Broadcom BCM7xxx specific workarounds */ -#define PHY_BRCM_100MBPS_WAR 0x00010000 +#define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) +#define PHY_BRCM_7XXX_PATCH(x) ((x) & 0xff) #define PHY_BCM_FLAGS_VALID 0x80000000 /* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */ @@ -92,4 +97,130 @@ #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 +/* + * Broadcom LED source encodings. These are used in BCM5461, BCM5481, + * BCM5482, and possibly some others. + */ +#define BCM_LED_SRC_LINKSPD1 0x0 +#define BCM_LED_SRC_LINKSPD2 0x1 +#define BCM_LED_SRC_XMITLED 0x2 +#define BCM_LED_SRC_ACTIVITYLED 0x3 +#define BCM_LED_SRC_FDXLED 0x4 +#define BCM_LED_SRC_SLAVE 0x5 +#define BCM_LED_SRC_INTR 0x6 +#define BCM_LED_SRC_QUALITY 0x7 +#define BCM_LED_SRC_RCVLED 0x8 +#define BCM_LED_SRC_MULTICOLOR1 0xa +#define BCM_LED_SRC_OPENSHORT 0xb +#define BCM_LED_SRC_OFF 0xe /* Tied high */ +#define BCM_LED_SRC_ON 0xf /* Tied low */ + + +/* + * BCM5482: Shadow registers + * Shadow values go into bits [14:10] of register 0x1c to select a shadow + * register to access. + */ +/* 00101: Spare Control Register 3 */ +#define BCM54XX_SHD_SCR3 0x05 +#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 +#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002 +#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004 + +/* 01010: Auto Power-Down */ +#define BCM54XX_SHD_APD 0x0a +#define BCM54XX_SHD_APD_EN 0x0020 + +#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ + /* LED3 / ~LINKSPD[2] selector */ +#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) + /* LED1 / ~LINKSPD[1] selector */ +#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) +#define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */ +#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ +#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ +#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */ +#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */ +#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */ + + +/* + * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17) + */ +#define MII_BCM54XX_EXP_AADJ1CH0 0x001f +#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200 +#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100 +#define MII_BCM54XX_EXP_AADJ1CH3 0x601f +#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002 +#define MII_BCM54XX_EXP_EXP08 0x0F08 +#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001 +#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200 +#define MII_BCM54XX_EXP_EXP75 0x0f75 +#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c +#define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001 +#define MII_BCM54XX_EXP_EXP96 0x0f96 +#define MII_BCM54XX_EXP_EXP96_MYST 0x0010 +#define MII_BCM54XX_EXP_EXP97 0x0f97 +#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c + +/* + * BCM5482: Secondary SerDes registers + */ +#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */ +#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */ +#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */ +#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ +#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ + + +/*****************************************************************************/ +/* Fast Ethernet Transceiver definitions. */ +/*****************************************************************************/ + +#define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */ +#define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */ +#define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */ +#define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */ +#define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */ +#define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */ + +#define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */ +#define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */ + + +/*** Shadow register definitions ***/ + +#define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */ +#define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */ + +#define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */ +#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003 +#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001 + +#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */ +#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */ + +/* + * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T + * 0x1c shadow registers. + */ +static inline int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow) +{ + phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow)); + return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD)); +} + +static inline int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow, + u16 val) +{ + return phy_write(phydev, MII_BCM54XX_SHD, + MII_BCM54XX_SHD_WRITE | + MII_BCM54XX_SHD_VAL(shadow) | + MII_BCM54XX_SHD_DATA(val)); +} + +#define BRCM_CL45VEN_EEE_CONTROL 0x803d +#define LPI_FEATURE_EN 0x8000 +#define LPI_FEATURE_EN_DIG1000X 0x4000 + #endif /* _LINUX_BRCMPHY_H */ |