diff options
Diffstat (limited to 'include/linux/bcma/bcma_driver_chipcommon.h')
| -rw-r--r-- | include/linux/bcma/bcma_driver_chipcommon.h | 88 |
1 files changed, 87 insertions, 1 deletions
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 8bbfe31fbac8..3c80885fa829 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -24,7 +24,7 @@ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ -#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 @@ -45,6 +45,7 @@ #define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ #define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ #define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ +#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */ #define BCMA_CC_CORECTL 0x0008 #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ @@ -88,6 +89,11 @@ #define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 #define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 #define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ +#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ +#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ +#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ +#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -117,10 +123,58 @@ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ #define BCMA_CC_FLASHCTL 0x0040 +/* Start/busy bit in flashcontrol */ +#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff +#define BCMA_CC_FLASHCTL_ACTION 0x00000700 +#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ #define BCMA_CC_FLASHCTL_START 0x80000000 #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START +/* Flashcontrol action + opcodes for ST flashes */ +#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ +#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ +#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ +#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ +#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ +#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */ +#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */ +#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */ +#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */ +#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */ +#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ +#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ +/* Flashcontrol action + opcodes for Atmel flashes */ +#define BCMA_CC_FLASHCTL_AT_READ 0x07e8 +#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2 +#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387 +#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283 +#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286 +#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288 +#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289 +#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281 +#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 +#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253 +#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255 +#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260 +#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261 +#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 +#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 #define BCMA_CC_FLASHADDR 0x0044 #define BCMA_CC_FLASHDATA 0x0048 +/* Status register bits for ST flashes */ +#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */ +#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */ +#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */ +#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2 +#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */ +/* Status register bits for Atmel flashes */ +#define BCMA_CC_FLASHDATA_AT_READY 0x80 +#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40 +#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38 +#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3 #define BCMA_CC_BCAST_ADDR 0x0050 #define BCMA_CC_BCAST_DATA 0x0054 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ @@ -280,6 +334,15 @@ /* 4706 PMU */ #define BCMA_CC_PMU4706_MAINPLL_PLL0 0 +#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */ +#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000 +#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 /* ALP clock on pre-PMU chips */ #define BCMA_CC_PMU_ALP_CLOCK 20000000 @@ -308,6 +371,19 @@ #define BCMA_CC_PPL_PCHI_OFF 5 #define BCMA_CC_PPL_PCHI_MASK 0x0000003f +#define BCMA_CC_PMU_PLL_CTL0 0 +#define BCMA_CC_PMU_PLL_CTL1 1 +#define BCMA_CC_PMU_PLL_CTL2 2 +#define BCMA_CC_PMU_PLL_CTL3 3 +#define BCMA_CC_PMU_PLL_CTL4 4 +#define BCMA_CC_PMU_PLL_CTL5 5 + +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000 +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20 + +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 + /* BCM4331 ChipControl numbers. */ #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ @@ -321,9 +397,18 @@ #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ +/* 43224 chip-specific ChipControl register bits */ +#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */ +#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ +#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ + +/* 4313 Chip specific ChipControl register bits */ +#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ @@ -411,5 +496,6 @@ extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); +extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); #endif /* LINUX_BCMA_DRIVER_CC_H_ */ |