diff options
Diffstat (limited to 'include/asm-arm')
| -rw-r--r-- | include/asm-arm/plat-s3c/map.h | 40 | ||||
| -rw-r--r-- | include/asm-arm/plat-s3c/regs-adc.h | 60 | ||||
| -rw-r--r-- | include/asm-arm/plat-s3c/uncompress.h | 155 | ||||
| -rw-r--r-- | include/asm-arm/plat-s3c24xx/clock.h | 64 | ||||
| -rw-r--r-- | include/asm-arm/plat-s3c24xx/common-smdk.h | 15 | ||||
| -rw-r--r-- | include/asm-arm/plat-s3c24xx/dma.h | 82 | ||||
| -rw-r--r-- | include/asm-arm/plat-s3c24xx/s3c2412.h | 29 |
7 files changed, 0 insertions, 445 deletions
diff --git a/include/asm-arm/plat-s3c/map.h b/include/asm-arm/plat-s3c/map.h deleted file mode 100644 index b84289d32a54..000000000000 --- a/include/asm-arm/plat-s3c/map.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/plat-s3c/map.h - * - * Copyright 2003, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C - Memory map definitions (virtual addresses) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_MAP_H -#define __ASM_PLAT_MAP_H __FILE__ - -/* Fit all our registers in at 0xF4000000 upwards, trying to use as - * little of the VA space as possible so vmalloc and friends have a - * better chance of getting memory. - * - * we try to ensure stuff like the IRQ registers are available for - * an single MOVS instruction (ie, only 8 bits of set data) - */ - -#define S3C_ADDR_BASE (0xF4000000) - -#ifndef __ASSEMBLY__ -#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) -#else -#define S3C_ADDR(x) (S3C_ADDR_BASE + (x)) -#endif - -#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */ -#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */ -#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */ -#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */ -#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */ -#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */ - -#endif /* __ASM_PLAT_MAP_H */ diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h deleted file mode 100644 index 4323cccc86cd..000000000000 --- a/include/asm-arm/plat-s3c/regs-adc.h +++ /dev/null @@ -1,60 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-adc.h - * - * Copyright (c) 2004 Shannon Holland <holland@loser.net> - * - * This program is free software; yosu can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 ADC registers -*/ - -#ifndef __ASM_ARCH_REGS_ADC_H -#define __ASM_ARCH_REGS_ADC_H "regs-adc.h" - -#define S3C2410_ADCREG(x) (x) - -#define S3C2410_ADCCON S3C2410_ADCREG(0x00) -#define S3C2410_ADCTSC S3C2410_ADCREG(0x04) -#define S3C2410_ADCDLY S3C2410_ADCREG(0x08) -#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C) -#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) - - -/* ADCCON Register Bits */ -#define S3C2410_ADCCON_ECFLG (1<<15) -#define S3C2410_ADCCON_PRSCEN (1<<14) -#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6) -#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6) -#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3) -#define S3C2410_ADCCON_MUXMASK (0x7<<3) -#define S3C2410_ADCCON_STDBM (1<<2) -#define S3C2410_ADCCON_READ_START (1<<1) -#define S3C2410_ADCCON_ENABLE_START (1<<0) -#define S3C2410_ADCCON_STARTMASK (0x3<<0) - - -/* ADCTSC Register Bits */ -#define S3C2410_ADCTSC_YM_SEN (1<<7) -#define S3C2410_ADCTSC_YP_SEN (1<<6) -#define S3C2410_ADCTSC_XM_SEN (1<<5) -#define S3C2410_ADCTSC_XP_SEN (1<<4) -#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3) -#define S3C2410_ADCTSC_AUTO_PST (1<<2) -#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0) - -/* ADCDAT0 Bits */ -#define S3C2410_ADCDAT0_UPDOWN (1<<15) -#define S3C2410_ADCDAT0_AUTO_PST (1<<14) -#define S3C2410_ADCDAT0_XY_PST (0x3<<12) -#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF) - -/* ADCDAT1 Bits */ -#define S3C2410_ADCDAT1_UPDOWN (1<<15) -#define S3C2410_ADCDAT1_AUTO_PST (1<<14) -#define S3C2410_ADCDAT1_XY_PST (0x3<<12) -#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF) - -#endif /* __ASM_ARCH_REGS_ADC_H */ - - diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h deleted file mode 100644 index 4df006b9cc10..000000000000 --- a/include/asm-arm/plat-s3c/uncompress.h +++ /dev/null @@ -1,155 +0,0 @@ -/* linux/include/asm-arm/plat-s3c/uncompress.h - * - * Copyright 2003, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_UNCOMPRESS_H -#define __ASM_PLAT_UNCOMPRESS_H - -typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ - -/* uart setup */ - -static unsigned int fifo_mask; -static unsigned int fifo_max; - -/* forward declerations */ - -static void arch_detect_cpu(void); - -/* defines for UART registers */ - -#include <plat/regs-serial.h> -#include <asm/plat-s3c/regs-watchdog.h> - -/* working in physical space... */ -#undef S3C2410_WDOGREG -#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) - -/* how many bytes we allow into the FIFO at a time in FIFO mode */ -#define FIFO_MAX (14) - -#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) - -static __inline__ void -uart_wr(unsigned int reg, unsigned int val) -{ - volatile unsigned int *ptr; - - ptr = (volatile unsigned int *)(reg + uart_base); - *ptr = val; -} - -static __inline__ unsigned int -uart_rd(unsigned int reg) -{ - volatile unsigned int *ptr; - - ptr = (volatile unsigned int *)(reg + uart_base); - return *ptr; -} - -/* we can deal with the case the UARTs are being run - * in FIFO mode, so that we don't hold up our execution - * waiting for tx to happen... -*/ - -static void putc(int ch) -{ - if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { - int level; - - while (1) { - level = uart_rd(S3C2410_UFSTAT); - level &= fifo_mask; - - if (level < fifo_max) - break; - } - - } else { - /* not using fifos */ - - while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) - barrier(); - } - - /* write byte to transmission register */ - uart_wr(S3C2410_UTXH, ch); -} - -static inline void flush(void) -{ -} - -#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) - -/* CONFIG_S3C_BOOT_WATCHDOG - * - * Simple boot-time watchdog setup, to reboot the system if there is - * any problem with the boot process -*/ - -#ifdef CONFIG_S3C_BOOT_WATCHDOG - -#define WDOG_COUNT (0xff00) - -static inline void arch_decomp_wdog(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); -} - -static void arch_decomp_wdog_start(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTDAT); - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); -} - -#else -#define arch_decomp_wdog_start() -#define arch_decomp_wdog() -#endif - -#ifdef CONFIG_S3C_BOOT_ERROR_RESET - -static void arch_decomp_error(const char *x) -{ - putstr("\n\n"); - putstr(x); - putstr("\n\n -- System resetting\n"); - - __raw_writel(0x4000, S3C2410_WTDAT); - __raw_writel(0x4000, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); - - while(1); -} - -#define arch_error arch_decomp_error -#endif - -static void error(char *err); - -static void -arch_decomp_setup(void) -{ - /* we may need to setup the uart(s) here if we are not running - * on an BAST... the BAST will have left the uarts configured - * after calling linux. - */ - - arch_detect_cpu(); - arch_decomp_wdog_start(); -} - - -#endif /* __ASM_PLAT_UNCOMPRESS_H */ diff --git a/include/asm-arm/plat-s3c24xx/clock.h b/include/asm-arm/plat-s3c24xx/clock.h deleted file mode 100644 index 235b753cd877..000000000000 --- a/include/asm-arm/plat-s3c24xx/clock.h +++ /dev/null @@ -1,64 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/clock.h - * linux/arch/arm/mach-s3c2410/clock.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * Written by Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct clk { - struct list_head list; - struct module *owner; - struct clk *parent; - const char *name; - int id; - int usage; - unsigned long rate; - unsigned long ctrlbit; - - int (*enable)(struct clk *, int enable); - int (*set_rate)(struct clk *c, unsigned long rate); - unsigned long (*get_rate)(struct clk *c); - unsigned long (*round_rate)(struct clk *c, unsigned long rate); - int (*set_parent)(struct clk *c, struct clk *parent); -}; - -/* other clocks which may be registered by board support */ - -extern struct clk s3c24xx_dclk0; -extern struct clk s3c24xx_dclk1; -extern struct clk s3c24xx_clkout0; -extern struct clk s3c24xx_clkout1; -extern struct clk s3c24xx_uclk; - -extern struct clk clk_usb_bus; - -/* core clock support */ - -extern struct clk clk_f; -extern struct clk clk_h; -extern struct clk clk_p; -extern struct clk clk_mpll; -extern struct clk clk_upll; -extern struct clk clk_xtal; - -/* exports for arch/arm/mach-s3c2410 - * - * Please DO NOT use these outside of arch/arm/mach-s3c2410 -*/ - -extern struct mutex clocks_mutex; - -extern int s3c2410_clkcon_enable(struct clk *clk, int enable); - -extern int s3c24xx_register_clock(struct clk *clk); -extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); - -extern int s3c24xx_setup_clocks(unsigned long xtal, - unsigned long fclk, - unsigned long hclk, - unsigned long pclk); diff --git a/include/asm-arm/plat-s3c24xx/common-smdk.h b/include/asm-arm/plat-s3c24xx/common-smdk.h deleted file mode 100644 index 58d9094c935c..000000000000 --- a/include/asm-arm/plat-s3c24xx/common-smdk.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Common code for SMDK2410 and SMDK2440 boards - * - * http://www.fluff.org/ben/smdk2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void smdk_machine_init(void); diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h deleted file mode 100644 index c78efe316fc8..000000000000 --- a/include/asm-arm/plat-s3c24xx/dma.h +++ /dev/null @@ -1,82 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/dma.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C24XX DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern struct sysdev_class dma_sysclass; -extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; - -#define DMA_CH_VALID (1<<31) -#define DMA_CH_NEVER (1<<30) - -struct s3c24xx_dma_addr { - unsigned long from; - unsigned long to; -}; - -/* struct s3c24xx_dma_map - * - * this holds the mapping information for the channel selected - * to be connected to the specified device -*/ - -struct s3c24xx_dma_map { - const char *name; - struct s3c24xx_dma_addr hw_addr; - - unsigned long channels[S3C2410_DMA_CHANNELS]; - unsigned long channels_rx[S3C2410_DMA_CHANNELS]; -}; - -struct s3c24xx_dma_selection { - struct s3c24xx_dma_map *map; - unsigned long map_size; - unsigned long dcon_mask; - - void (*select)(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map); - - void (*direction)(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map, - enum s3c2410_dmasrc dir); -}; - -extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); - -/* struct s3c24xx_dma_order_ch - * - * channel map for one of the `enum dma_ch` dma channels. the list - * entry contains a set of low-level channel numbers, orred with - * DMA_CH_VALID, which are checked in the order in the array. -*/ - -struct s3c24xx_dma_order_ch { - unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */ - unsigned int flags; /* flags */ -}; - -/* struct s3c24xx_dma_order - * - * information provided by either the core or the board to give the - * dma system a hint on how to allocate channels -*/ - -struct s3c24xx_dma_order { - struct s3c24xx_dma_order_ch channels[DMACH_MAX]; -}; - -extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map); - -/* DMA init code, called from the cpu support code */ - -extern int s3c2410_dma_init(void); - -extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq, - unsigned int stride); diff --git a/include/asm-arm/plat-s3c24xx/s3c2412.h b/include/asm-arm/plat-s3c24xx/s3c2412.h deleted file mode 100644 index 3ec97685e781..000000000000 --- a/include/asm-arm/plat-s3c24xx/s3c2412.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2412 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_init(void); - -extern void s3c2412_map_io(struct map_desc *mach_desc, int size); - -extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2412_init_clocks(int xtal); - -extern int s3c2412_baseclk_add(void); -#else -#define s3c2412_init_clocks NULL -#define s3c2412_init_uarts NULL -#define s3c2412_map_io NULL -#define s3c2412_init NULL -#endif |