diff options
Diffstat (limited to 'include/asm-arm/hardware/locomo.h')
| -rw-r--r-- | include/asm-arm/hardware/locomo.h | 33 |
1 files changed, 18 insertions, 15 deletions
diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h index 22dfb1737768..adab77780ed3 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/include/asm-arm/hardware/locomo.h @@ -54,17 +54,18 @@ #define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ /* SPI interface */ -#define LOCOMO_SPIMD 0x60 /* SPI mode setting */ -#define LOCOMO_SPICT 0x64 /* SPI mode control */ -#define LOCOMO_SPIST 0x68 /* SPI status */ -#define LOCOMO_SPIIS 0x70 /* SPI interrupt status */ -#define LOCOMO_SPIWE 0x74 /* SPI interrupt status write enable */ -#define LOCOMO_SPIIE 0x78 /* SPI interrupt enable */ -#define LOCOMO_SPIIR 0x7c /* SPI interrupt request */ -#define LOCOMO_SPITD 0x80 /* SPI transfer data write */ -#define LOCOMO_SPIRD 0x84 /* SPI receive data read */ -#define LOCOMO_SPITS 0x88 /* SPI transfer data shift */ -#define LOCOMO_SPIRS 0x8C /* SPI receive data shift */ +#define LOCOMO_SPI 0x60 +#define LOCOMO_SPIMD 0x00 /* SPI mode setting */ +#define LOCOMO_SPICT 0x04 /* SPI mode control */ +#define LOCOMO_SPIST 0x08 /* SPI status */ +#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ +#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ +#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ +#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */ +#define LOCOMO_SPITD 0x20 /* SPI transfer data write */ +#define LOCOMO_SPIRD 0x24 /* SPI receive data read */ +#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ +#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ #define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ #define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */ #define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ @@ -161,6 +162,7 @@ extern struct bus_type locomo_bus_type; #define LOCOMO_DEVID_AUDIO 3 #define LOCOMO_DEVID_LED 4 #define LOCOMO_DEVID_UART 5 +#define LOCOMO_DEVID_SPI 6 struct locomo_dev { struct device dev; @@ -197,10 +199,11 @@ int locomo_driver_register(struct locomo_driver *); void locomo_driver_unregister(struct locomo_driver *); /* GPIO control functions */ -void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir); -unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits); -unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits); -void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set); +void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir); +int locomo_gpio_read_level(struct device *dev, unsigned int bits); +int locomo_gpio_read_output(struct device *dev, unsigned int bits); +void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set); + /* M62332 control function */ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); |