diff options
Diffstat (limited to 'include/asm-arm/arch-s3c2410/entry-macro.S')
| -rw-r--r-- | include/asm-arm/arch-s3c2410/entry-macro.S | 119 |
1 files changed, 119 insertions, 0 deletions
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S new file mode 100644 index 000000000000..b7d4d7f4422d --- /dev/null +++ b/include/asm-arm/arch-s3c2410/entry-macro.S @@ -0,0 +1,119 @@ +/* + * include/asm-arm/arch-s3c2410/entry-macro.S + * + * Low-level IRQ helper macros for S3C2410-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + + * Modifications: + * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + */ + + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + mov \tmp, #S3C24XX_VA_IRQ + ldr \irqnr, [ \tmp, #0x14 ] @ get irq no +30000: + teq \irqnr, #4 + teqne \irqnr, #5 + beq 1002f @ external irq reg + + @ debug check to see if interrupt reported is the same + @ as the offset.... + + teq \irqnr, #0 + beq 20002f + ldr \irqstat, [ \tmp, #0x10 ] @ INTPND + mov \irqstat, \irqstat, lsr \irqnr + tst \irqstat, #1 + bne 20002f + + /* debug/warning if we get an invalud response from the + * INTOFFSET register */ +#if 1 + stmfd r13!, { r0 - r4 , r8-r12, r14 } + ldr r1, [ \tmp, #0x14 ] @ INTOFFSET + ldr r2, [ \tmp, #0x10 ] @ INTPND + ldr r3, [ \tmp, #0x00 ] @ SRCPND + adr r0, 20003f + bl printk + b 20004f + +20003: + .ascii "<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n" + .byte 0 + .align 4 +20004: + mov r1, #1 + mov \tmp, #S3C24XX_VA_IRQ + ldmfd r13!, { r0 - r4 , r8-r12, r14 } +#endif + + @ try working out interrupt number for ourselves + mov \irqnr, #0 + ldr \irqstat, [ \tmp, #0x10 ] @ INTPND +10021: + movs \irqstat, \irqstat, lsr#1 + bcs 30000b @ try and re-start the proccess + add \irqnr, \irqnr, #1 + cmp \irqnr, #32 + ble 10021b + + @ found no interrupt, set Z flag and leave + movs \irqnr, #0 + b 1001f + +20005: +20002: @ exit + @ we base the s3c2410x interrupts at 16 and above to allow + @ isa peripherals to have their standard interrupts, also + @ ensure that Z flag is un-set on exit + + @ note, we cannot be sure if we get IRQ_EINT0 (0) that + @ there is simply no interrupt pending, so in all other + @ cases we jump to say we have found something, otherwise + @ we check to see if the interrupt really is assrted + adds \irqnr, \irqnr, #IRQ_EINT0 + teq \irqnr, #IRQ_EINT0 + bne 1001f @ exit + ldr \irqstat, [ \tmp, #0x10 ] @ INTPND + teq \irqstat, #0 + moveq \irqnr, #0 + b 1001f + + @ we get here from no main or external interrupts pending +1002: + add \tmp, \tmp, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ + ldr \irqstat, [ \tmp, # 0xa8 ] @ EXTINTPEND + ldr \irqnr, [ \tmp, # 0xa4 ] @ EXTINTMASK + + bic \irqstat, \irqstat, \irqnr @ clear masked irqs + + mov \irqnr, #IRQ_EINT4 @ start extint nos + mov \irqstat, \irqstat, lsr#4 @ ignore bottom 4 bits +10021: + movs \irqstat, \irqstat, lsr#1 + bcs 1004f + add \irqnr, \irqnr, #1 + cmp \irqnr, #IRQ_EINT23 + ble 10021b + + @ found no interrupt, set Z flag and leave + movs \irqnr, #0 + +1004: @ ensure Z flag clear in case our MOVS shifted out the last bit + teq \irqnr, #0 +1001: + @ exit irq routine + .endm + + + /* currently don't need an disable_fiq macro */ + + .macro disable_fiq + .endm + + |