diff options
Diffstat (limited to 'fs')
74 files changed, 1829 insertions, 1930 deletions
diff --git a/fs/9p/Kconfig b/fs/9p/Kconfig new file mode 100644 index 000000000000..74e0723e90bc --- /dev/null +++ b/fs/9p/Kconfig @@ -0,0 +1,10 @@ +config 9P_FS + tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)" + depends on INET && NET_9P && EXPERIMENTAL + help + If you say Y here, you will get experimental support for + Plan 9 resource sharing via the 9P2000 protocol. + + See <http://v9fs.sf.net> for more information. + + If unsure, say N. diff --git a/fs/Kconfig b/fs/Kconfig index 51307b0fdf0f..93945dd0b1ae 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -27,141 +27,8 @@ config FS_MBCACHE default y if EXT4_FS=y && EXT4_FS_XATTR default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR -config REISERFS_FS - tristate "Reiserfs support" - help - Stores not just filenames but the files themselves in a balanced - tree. Uses journalling. - - Balanced trees are more efficient than traditional file system - architectural foundations. - - In general, ReiserFS is as fast as ext2, but is very efficient with - large directories and small files. Additional patches are needed - for NFS and quotas, please see <http://www.namesys.com/> for links. - - It is more easily extended to have features currently found in - database and keyword search systems than block allocation based file - systems are. The next version will be so extended, and will support - plugins consistent with our motto ``It takes more than a license to - make source code open.'' - - Read <http://www.namesys.com/> to learn more about reiserfs. - - Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. - - If you like it, you can pay us to add new features to it that you - need, buy a support contract, or pay us to port it to another OS. - -config REISERFS_CHECK - bool "Enable reiserfs debug mode" - depends on REISERFS_FS - help - If you set this to Y, then ReiserFS will perform every check it can - possibly imagine of its internal consistency throughout its - operation. It will also go substantially slower. More than once we - have forgotten that this was on, and then gone despondent over the - latest benchmarks.:-) Use of this option allows our team to go all - out in checking for consistency when debugging without fear of its - effect on end users. If you are on the verge of sending in a bug - report, say Y and you might get a useful error message. Almost - everyone should say N. - -config REISERFS_PROC_INFO - bool "Stats in /proc/fs/reiserfs" - depends on REISERFS_FS && PROC_FS - help - Create under /proc/fs/reiserfs a hierarchy of files, displaying - various ReiserFS statistics and internal data at the expense of - making your kernel or module slightly larger (+8 KB). This also - increases the amount of kernel memory required for each mount. - Almost everyone but ReiserFS developers and people fine-tuning - reiserfs or tracing problems should say N. - -config REISERFS_FS_XATTR - bool "ReiserFS extended attributes" - depends on REISERFS_FS - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - <http://acl.bestbits.at/> for details). - - If unsure, say N. - -config REISERFS_FS_POSIX_ACL - bool "ReiserFS POSIX Access Control Lists" - depends on REISERFS_FS_XATTR - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website <http://acl.bestbits.at/>. - - If you don't know what Access Control Lists are, say N - -config REISERFS_FS_SECURITY - bool "ReiserFS Security Labels" - depends on REISERFS_FS_XATTR - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the ReiserFS filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. - -config JFS_FS - tristate "JFS filesystem support" - select NLS - help - This is a port of IBM's Journaled Filesystem . More information is - available in the file <file:Documentation/filesystems/jfs.txt>. - - If you do not intend to use the JFS filesystem, say N. - -config JFS_POSIX_ACL - bool "JFS POSIX Access Control Lists" - depends on JFS_FS - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website <http://acl.bestbits.at/>. - - If you don't know what Access Control Lists are, say N - -config JFS_SECURITY - bool "JFS Security Labels" - depends on JFS_FS - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the jfs filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. - -config JFS_DEBUG - bool "JFS debugging" - depends on JFS_FS - help - If you are experiencing any problems with the JFS filesystem, say - Y here. This will result in additional debugging messages to be - written to the system log. Under normal circumstances, this - results in very little overhead. - -config JFS_STATISTICS - bool "JFS statistics" - depends on JFS_FS - help - Enabling this option will cause statistics from the JFS file system - to be made available to the user in the /proc/fs/jfs/ directory. +source "fs/reiserfs/Kconfig" +source "fs/jfs/Kconfig" config FS_POSIX_ACL # Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4) @@ -182,111 +49,8 @@ config FILE_LOCKING source "fs/xfs/Kconfig" source "fs/gfs2/Kconfig" - -config OCFS2_FS - tristate "OCFS2 file system support" - depends on NET && SYSFS - select CONFIGFS_FS - select JBD2 - select CRC32 - select QUOTA - select QUOTA_TREE - help - OCFS2 is a general purpose extent based shared disk cluster file - system with many similarities to ext3. It supports 64 bit inode - numbers, and has automatically extending metadata groups which may - also make it attractive for non-clustered use. - - You'll want to install the ocfs2-tools package in order to at least - get "mount.ocfs2". - - Project web page: http://oss.oracle.com/projects/ocfs2 - Tools web page: http://oss.oracle.com/projects/ocfs2-tools - OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ - - For more information on OCFS2, see the file - <file:Documentation/filesystems/ocfs2.txt>. - -config OCFS2_FS_O2CB - tristate "O2CB Kernelspace Clustering" - depends on OCFS2_FS - default y - help - OCFS2 includes a simple kernelspace clustering package, the OCFS2 - Cluster Base. It only requires a very small userspace component - to configure it. This comes with the standard ocfs2-tools package. - O2CB is limited to maintaining a cluster for OCFS2 file systems. - It cannot manage any other cluster applications. - - It is always safe to say Y here, as the clustering method is - run-time selectable. - -config OCFS2_FS_USERSPACE_CLUSTER - tristate "OCFS2 Userspace Clustering" - depends on OCFS2_FS && DLM - default y - help - This option will allow OCFS2 to use userspace clustering services - in conjunction with the DLM in fs/dlm. If you are using a - userspace cluster manager, say Y here. - - It is safe to say Y, as the clustering method is run-time - selectable. - -config OCFS2_FS_STATS - bool "OCFS2 statistics" - depends on OCFS2_FS - default y - help - This option allows some fs statistics to be captured. Enabling - this option may increase the memory consumption. - -config OCFS2_DEBUG_MASKLOG - bool "OCFS2 logging support" - depends on OCFS2_FS - default y - help - The ocfs2 filesystem has an extensive logging system. The system - allows selection of events to log via files in /sys/o2cb/logmask/. - This option will enlarge your kernel, but it allows debugging of - ocfs2 filesystem issues. - -config OCFS2_DEBUG_FS - bool "OCFS2 expensive checks" - depends on OCFS2_FS - default n - help - This option will enable expensive consistency checks. Enable - this option for debugging only as it is likely to decrease - performance of the filesystem. - -config OCFS2_FS_POSIX_ACL - bool "OCFS2 POSIX Access Control Lists" - depends on OCFS2_FS - select FS_POSIX_ACL - default n - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - -config BTRFS_FS - tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format" - depends on EXPERIMENTAL - select LIBCRC32C - select ZLIB_INFLATE - select ZLIB_DEFLATE - help - Btrfs is a new filesystem with extents, writable snapshotting, - support for multiple devices and many more features. - - Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET - FINALIZED. You should say N here unless you are interested in - testing Btrfs with non-critical data. - - To compile this file system support as a module, choose M here. The - module will be called btrfs. - - If unsure, say N. +source "fs/ocfs2/Kconfig" +source "fs/btrfs/Kconfig" endif # BLOCK @@ -348,64 +112,9 @@ config QUOTACTL depends on XFS_QUOTA || QUOTA default y -config AUTOFS_FS - tristate "Kernel automounter support" - help - The automounter is a tool to automatically mount remote file systems - on demand. This implementation is partially kernel-based to reduce - overhead in the already-mounted case; this is unlike the BSD - automounter (amd), which is a pure user space daemon. - - To use the automounter you need the user-space tools from the autofs - package; you can find the location in <file:Documentation/Changes>. - You also want to answer Y to "NFS file system support", below. - - If you want to use the newer version of the automounter with more - features, say N here and say Y to "Kernel automounter v4 support", - below. - - To compile this support as a module, choose M here: the module will be - called autofs. - - If you are not a part of a fairly large, distributed network, you - probably do not need an automounter, and can say N here. - -config AUTOFS4_FS - tristate "Kernel automounter version 4 support (also supports v3)" - help - The automounter is a tool to automatically mount remote file systems - on demand. This implementation is partially kernel-based to reduce - overhead in the already-mounted case; this is unlike the BSD - automounter (amd), which is a pure user space daemon. - - To use the automounter you need the user-space tools from - <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also - want to answer Y to "NFS file system support", below. - - To compile this support as a module, choose M here: the module will be - called autofs4. You will need to add "alias autofs autofs4" to your - modules configuration file. - - If you are not a part of a fairly large, distributed network or - don't have a laptop which needs to dynamically reconfigure to the - local network, you probably do not need an automounter, and can say - N here. - -config FUSE_FS - tristate "FUSE (Filesystem in Userspace) support" - help - With FUSE it is possible to implement a fully functional filesystem - in a userspace program. - - There's also companion library: libfuse. This library along with - utilities is available from the FUSE homepage: - <http://fuse.sourceforge.net/> - - See <file:Documentation/filesystems/fuse.txt> for more information. - See <file:Documentation/Changes> for needed library/utility version. - - If you want to develop a userspace FS, or if you want to use - a filesystem based on FUSE, answer Y or M. +source "fs/autofs/Kconfig" +source "fs/autofs4/Kconfig" +source "fs/fuse/Kconfig" config GENERIC_ACL bool @@ -414,64 +123,8 @@ config GENERIC_ACL if BLOCK menu "CD-ROM/DVD Filesystems" -config ISO9660_FS - tristate "ISO 9660 CDROM file system support" - help - This is the standard file system used on CD-ROMs. It was previously - known as "High Sierra File System" and is called "hsfs" on other - Unix systems. The so-called Rock-Ridge extensions which allow for - long Unix filenames and symbolic links are also supported by this - driver. If you have a CD-ROM drive and want to do more with it than - just listen to audio CDs and watch its LEDs, say Y (and read - <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO, - available from <http://www.tldp.org/docs.html#howto>), thereby - enlarging your kernel by about 27 KB; otherwise say N. - - To compile this file system support as a module, choose M here: the - module will be called isofs. - -config JOLIET - bool "Microsoft Joliet CDROM extensions" - depends on ISO9660_FS - select NLS - help - Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system - which allows for long filenames in unicode format (unicode is the - new 16 bit character code, successor to ASCII, which encodes the - characters of almost all languages of the world; see - <http://www.unicode.org/> for more information). Say Y here if you - want to be able to read Joliet CD-ROMs under Linux. - -config ZISOFS - bool "Transparent decompression extension" - depends on ISO9660_FS - select ZLIB_INFLATE - help - This is a Linux-specific extension to RockRidge which lets you store - data in compressed form on a CD-ROM and have it transparently - decompressed when the CD-ROM is accessed. See - <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools - necessary to create such a filesystem. Say Y here if you want to be - able to read such compressed CD-ROMs. - -config UDF_FS - tristate "UDF file system support" - select CRC_ITU_T - help - This is the new file system used on some CD-ROMs and DVDs. Say Y if - you intend to mount DVD discs or CDRW's written in packet mode, or - if written to by other UDF utilities, such as DirectCD. - Please read <file:Documentation/filesystems/udf.txt>. - - To compile this file system support as a module, choose M here: the - module will be called udf. - - If unsure, say N. - -config UDF_NLS - bool - default y - depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y) +source "fs/isofs/Kconfig" +source "fs/udf/Kconfig" endmenu endif # BLOCK @@ -479,182 +132,8 @@ endif # BLOCK if BLOCK menu "DOS/FAT/NT Filesystems" -config FAT_FS - tristate - select NLS - help - If you want to use one of the FAT-based file systems (the MS-DOS and - VFAT (Windows 95) file systems), then you must say Y or M here - to include FAT support. You will then be able to mount partitions or - diskettes with FAT-based file systems and transparently access the - files on them, i.e. MSDOS files will look and behave just like all - other Unix files. - - This FAT support is not a file system in itself, it only provides - the foundation for the other file systems. You will have to say Y or - M to at least one of "MSDOS fs support" or "VFAT fs support" in - order to make use of it. - - Another way to read and write MSDOS floppies and hard drive - partitions from within Linux (but not transparently) is with the - mtools ("man mtools") program suite. You don't need to say Y here in - order to do that. - - If you need to move large files on floppies between a DOS and a - Linux box, say Y here, mount the floppy under Linux with an MSDOS - file system and use GNU tar's M option. GNU tar is a program - available for Unix and DOS ("man tar" or "info tar"). - - The FAT support will enlarge your kernel by about 37 KB. If unsure, - say Y. - - To compile this as a module, choose M here: the module will be called - fat. Note that if you compile the FAT support as a module, you - cannot compile any of the FAT-based file systems into the kernel - -- they will have to be modules as well. - -config MSDOS_FS - tristate "MSDOS fs support" - select FAT_FS - help - This allows you to mount MSDOS partitions of your hard drive (unless - they are compressed; to access compressed MSDOS partitions under - Linux, you can either use the DOS emulator DOSEMU, described in the - DOSEMU-HOWTO, available from - <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in - <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you - intend to use dosemu with a non-compressed MSDOS partition, say Y - here) and MSDOS floppies. This means that file access becomes - transparent, i.e. the MSDOS files look and behave just like all - other Unix files. - - If you have Windows 95 or Windows NT installed on your MSDOS - partitions, you should use the VFAT file system (say Y to "VFAT fs - support" below), or you will not be able to see the long filenames - generated by Windows 95 / Windows NT. - - This option will enlarge your kernel by about 7 KB. If unsure, - answer Y. This will only work if you said Y to "DOS FAT fs support" - as well. To compile this as a module, choose M here: the module will - be called msdos. - -config VFAT_FS - tristate "VFAT (Windows-95) fs support" - select FAT_FS - help - This option provides support for normal Windows file systems with - long filenames. That includes non-compressed FAT-based file systems - used by Windows 95, Windows 98, Windows NT 4.0, and the Unix - programs from the mtools package. - - The VFAT support enlarges your kernel by about 10 KB and it only - works if you said Y to the "DOS FAT fs support" above. Please read - the file <file:Documentation/filesystems/vfat.txt> for details. If - unsure, say Y. - - To compile this as a module, choose M here: the module will be called - vfat. - -config FAT_DEFAULT_CODEPAGE - int "Default codepage for FAT" - depends on MSDOS_FS || VFAT_FS - default 437 - help - This option should be set to the codepage of your FAT filesystems. - It can be overridden with the "codepage" mount option. - See <file:Documentation/filesystems/vfat.txt> for more information. - -config FAT_DEFAULT_IOCHARSET - string "Default iocharset for FAT" - depends on VFAT_FS - default "iso8859-1" - help - Set this to the default input/output character set you'd - like FAT to use. It should probably match the character set - that most of your FAT filesystems use, and can be overridden - with the "iocharset" mount option for FAT filesystems. - Note that "utf8" is not recommended for FAT filesystems. - If unsure, you shouldn't set "utf8" here. - See <file:Documentation/filesystems/vfat.txt> for more information. - -config NTFS_FS - tristate "NTFS file system support" - select NLS - help - NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003. - - Saying Y or M here enables read support. There is partial, but - safe, write support available. For write support you must also - say Y to "NTFS write support" below. - - There are also a number of user-space tools available, called - ntfsprogs. These include ntfsundelete and ntfsresize, that work - without NTFS support enabled in the kernel. - - This is a rewrite from scratch of Linux NTFS support and replaced - the old NTFS code starting with Linux 2.5.11. A backport to - the Linux 2.4 kernel series is separately available as a patch - from the project web site. - - For more information see <file:Documentation/filesystems/ntfs.txt> - and <http://www.linux-ntfs.org/>. - - To compile this file system support as a module, choose M here: the - module will be called ntfs. - - If you are not using Windows NT, 2000, XP or 2003 in addition to - Linux on your computer it is safe to say N. - -config NTFS_DEBUG - bool "NTFS debugging support" - depends on NTFS_FS - help - If you are experiencing any problems with the NTFS file system, say - Y here. This will result in additional consistency checks to be - performed by the driver as well as additional debugging messages to - be written to the system log. Note that debugging messages are - disabled by default. To enable them, supply the option debug_msgs=1 - at the kernel command line when booting the kernel or as an option - to insmod when loading the ntfs module. Once the driver is active, - you can enable debugging messages by doing (as root): - echo 1 > /proc/sys/fs/ntfs-debug - Replacing the "1" with "0" would disable debug messages. - - If you leave debugging messages disabled, this results in little - overhead, but enabling debug messages results in very significant - slowdown of the system. - - When reporting bugs, please try to have available a full dump of - debugging messages while the misbehaviour was occurring. - -config NTFS_RW - bool "NTFS write support" - depends on NTFS_FS - help - This enables the partial, but safe, write support in the NTFS driver. - - The only supported operation is overwriting existing files, without - changing the file length. No file or directory creation, deletion or - renaming is possible. Note only non-resident files can be written to - so you may find that some very small files (<500 bytes or so) cannot - be written to. - - While we cannot guarantee that it will not damage any data, we have - so far not received a single report where the driver would have - damaged someones data so we assume it is perfectly safe to use. - - Note: While write support is safe in this version (a rewrite from - scratch of the NTFS support), it should be noted that the old NTFS - write support, included in Linux 2.5.10 and before (since 1997), - is not safe. - - This is currently useful with TopologiLinux. TopologiLinux is run - on top of any DOS/Microsoft Windows system without partitioning your - hard disk. Unlike other Linux distributions TopologiLinux does not - need its own partition. For more information see - <http://topologi-linux.sourceforge.net/> - - It is perfectly safe to say N here. +source "fs/fat/Kconfig" +source "fs/ntfs/Kconfig" endmenu endif # BLOCK @@ -662,30 +141,7 @@ endif # BLOCK menu "Pseudo filesystems" source "fs/proc/Kconfig" - -config SYSFS - bool "sysfs file system support" if EMBEDDED - default y - help - The sysfs filesystem is a virtual filesystem that the kernel uses to - export internal kernel objects, their attributes, and their - relationships to one another. - - Users can use sysfs to ascertain useful information about the running - kernel, such as the devices the kernel has discovered on each bus and - which driver each is bound to. sysfs can also be used to tune devices - and other kernel subsystems. - - Some system agents rely on the information in sysfs to operate. - /sbin/hotplug uses device and object attributes in sysfs to assist in - delegating policy decisions, like persistently naming devices. - - sysfs is currently used by the block subsystem to mount the root - partition. If sysfs is disabled you must specify the boot device on - the kernel boot command line via its major and minor numbers. For - example, "root=03:01" for /dev/hda1. - - Designers of embedded systems may wish to say N here to conserve space. +source "fs/sysfs/Kconfig" config TMPFS bool "Virtual memory file system support (former shm fs)" @@ -726,17 +182,7 @@ config HUGETLBFS config HUGETLB_PAGE def_bool HUGETLBFS -config CONFIGFS_FS - tristate "Userspace-driven configuration filesystem" - depends on SYSFS - help - configfs is a ram-based filesystem that provides the converse - of sysfs's functionality. Where sysfs is a filesystem-based - view of kernel objects, configfs is a filesystem-based manager - of kernel objects, or config_items. - - Both sysfs and configfs can and should exist together on the - same system. One is not a replacement for the other. +source "fs/configfs/Kconfig" endmenu @@ -755,425 +201,27 @@ menuconfig MISC_FILESYSTEMS if MISC_FILESYSTEMS -config ADFS_FS - tristate "ADFS file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - The Acorn Disc Filing System is the standard file system of the - RiscOS operating system which runs on Acorn's ARM-based Risc PC - systems and the Acorn Archimedes range of machines. If you say Y - here, Linux will be able to read from ADFS partitions on hard drives - and from ADFS-formatted floppy discs. If you also want to be able to - write to those devices, say Y to "ADFS write support" below. - - The ADFS partition should be the first partition (i.e., - /dev/[hs]d?1) on each of your drives. Please read the file - <file:Documentation/filesystems/adfs.txt> for further details. - - To compile this code as a module, choose M here: the module will be - called adfs. - - If unsure, say N. - -config ADFS_FS_RW - bool "ADFS write support (DANGEROUS)" - depends on ADFS_FS - help - If you say Y here, you will be able to write to ADFS partitions on - hard drives and ADFS-formatted floppy disks. This is experimental - codes, so if you're unsure, say N. - -config AFFS_FS - tristate "Amiga FFS file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - The Fast File System (FFS) is the common file system used on hard - disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y - if you want to be able to read and write files from and to an Amiga - FFS partition on your hard drive. Amiga floppies however cannot be - read with this driver due to an incompatibility of the floppy - controller used in an Amiga and the standard floppy controller in - PCs and workstations. Read <file:Documentation/filesystems/affs.txt> - and <file:fs/affs/Changes>. - - With this driver you can also mount disk files used by Bernd - Schmidt's Un*X Amiga Emulator - (<http://www.freiburg.linux.de/~uae/>). - If you want to do this, you will also need to say Y or M to "Loop - device support", above. - - To compile this file system support as a module, choose M here: the - module will be called affs. If unsure, say N. - -config ECRYPT_FS - tristate "eCrypt filesystem layer support (EXPERIMENTAL)" - depends on EXPERIMENTAL && KEYS && CRYPTO && NET - help - Encrypted filesystem that operates on the VFS layer. See - <file:Documentation/filesystems/ecryptfs.txt> to learn more about - eCryptfs. Userspace components are required and can be - obtained from <http://ecryptfs.sf.net>. - - To compile this file system support as a module, choose M here: the - module will be called ecryptfs. - -config HFS_FS - tristate "Apple Macintosh file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - select NLS - help - If you say Y here, you will be able to mount Macintosh-formatted - floppy disks and hard drive partitions with full read-write access. - Please read <file:Documentation/filesystems/hfs.txt> to learn about - the available mount options. - - To compile this file system support as a module, choose M here: the - module will be called hfs. - -config HFSPLUS_FS - tristate "Apple Extended HFS file system support" - depends on BLOCK - select NLS - select NLS_UTF8 - help - If you say Y here, you will be able to mount extended format - Macintosh-formatted hard drive partitions with full read-write access. - - This file system is often called HFS+ and was introduced with - MacOS 8. It includes all Mac specific filesystem data such as - data forks and creator codes, but it also has several UNIX - style features such as file ownership and permissions. - -config BEFS_FS - tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - select NLS - help - The BeOS File System (BeFS) is the native file system of Be, Inc's - BeOS. Notable features include support for arbitrary attributes - on files and directories, and database-like indices on selected - attributes. (Also note that this driver doesn't make those features - available at this time). It is a 64 bit filesystem, so it supports - extremely large volumes and files. - - If you use this filesystem, you should also say Y to at least one - of the NLS (native language support) options below. - - If you don't know what this is about, say N. - - To compile this as a module, choose M here: the module will be - called befs. - -config BEFS_DEBUG - bool "Debug BeFS" - depends on BEFS_FS - help - If you say Y here, you can use the 'debug' mount option to enable - debugging output from the driver. - -config BFS_FS - tristate "BFS file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - Boot File System (BFS) is a file system used under SCO UnixWare to - allow the bootloader access to the kernel image and other important - files during the boot process. It is usually mounted under /stand - and corresponds to the slice marked as "STAND" in the UnixWare - partition. You should say Y if you want to read or write the files - on your /stand slice from within Linux. You then also need to say Y - to "UnixWare slices support", below. More information about the BFS - file system is contained in the file - <file:Documentation/filesystems/bfs.txt>. - - If you don't know what this is about, say N. - - To compile this as a module, choose M here: the module will be called - bfs. Note that the file system of your root partition (the one - containing the directory /) cannot be compiled as a module. - - - -config EFS_FS - tristate "EFS file system support (read only) (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - EFS is an older file system used for non-ISO9660 CD-ROMs and hard - disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer - uses the XFS file system for hard disk partitions however). - - This implementation only offers read-only access. If you don't know - what all this is about, it's safe to say N. For more information - about EFS see its home page at <http://aeschi.ch.eu.org/efs/>. - - To compile the EFS file system support as a module, choose M here: the - module will be called efs. - +source "fs/adfs/Kconfig" +source "fs/affs/Kconfig" +source "fs/ecryptfs/Kconfig" +source "fs/hfs/Kconfig" +source "fs/hfsplus/Kconfig" +source "fs/befs/Kconfig" +source "fs/bfs/Kconfig" +source "fs/efs/Kconfig" source "fs/jffs2/Kconfig" # UBIFS File system configuration source "fs/ubifs/Kconfig" - -config CRAMFS - tristate "Compressed ROM file system support (cramfs)" - depends on BLOCK - select ZLIB_INFLATE - help - Saying Y here includes support for CramFs (Compressed ROM File - System). CramFs is designed to be a simple, small, and compressed - file system for ROM based embedded systems. CramFs is read-only, - limited to 256MB file systems (with 16MB files), and doesn't support - 16/32 bits uid/gid, hard links and timestamps. - - See <file:Documentation/filesystems/cramfs.txt> and - <file:fs/cramfs/README> for further information. - - To compile this as a module, choose M here: the module will be called - cramfs. Note that the root file system (the one containing the - directory /) cannot be compiled as a module. - - If unsure, say N. - -config SQUASHFS - tristate "SquashFS 4.0 - Squashed file system support" - depends on BLOCK - select ZLIB_INFLATE - help - Saying Y here includes support for SquashFS 4.0 (a Compressed - Read-Only File System). Squashfs is a highly compressed read-only - filesystem for Linux. It uses zlib compression to compress both - files, inodes and directories. Inodes in the system are very small - and all blocks are packed to minimise data overhead. Block sizes - greater than 4K are supported up to a maximum of 1 Mbytes (default - block size 128K). SquashFS 4.0 supports 64 bit filesystems and files - (larger than 4GB), full uid/gid information, hard links and - timestamps. - - Squashfs is intended for general read-only filesystem use, for - archival use (i.e. in cases where a .tar.gz file may be used), and in - embedded systems where low overhead is needed. Further information - and tools are available from http://squashfs.sourceforge.net. - - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read <file:Documentation/modules.txt>. The module - will be called squashfs. Note that the root file system (the one - containing the directory /) cannot be compiled as a module. - - If unsure, say N. - -config SQUASHFS_EMBEDDED - - bool "Additional option for memory-constrained systems" - depends on SQUASHFS - default n - help - Saying Y here allows you to specify cache size. - - If unsure, say N. - -config SQUASHFS_FRAGMENT_CACHE_SIZE - int "Number of fragments cached" if SQUASHFS_EMBEDDED - depends on SQUASHFS - default "3" - help - By default SquashFS caches the last 3 fragments read from - the filesystem. Increasing this amount may mean SquashFS - has to re-read fragments less often from disk, at the expense - of extra system memory. Decreasing this amount will mean - SquashFS uses less memory at the expense of extra reads from disk. - - Note there must be at least one cached fragment. Anything - much more than three will probably not make much difference. - -config VXFS_FS - tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" - depends on BLOCK - help - FreeVxFS is a file system driver that support the VERITAS VxFS(TM) - file system format. VERITAS VxFS(TM) is the standard file system - of SCO UnixWare (and possibly others) and optionally available - for Sunsoft Solaris, HP-UX and many other operating systems. - Currently only readonly access is supported. - - NOTE: the file system type as used by mount(1), mount(2) and - fstab(5) is 'vxfs' as it describes the file system format, not - the actual driver. - - To compile this as a module, choose M here: the module will be - called freevxfs. If unsure, say N. - -config MINIX_FS - tristate "Minix file system support" - depends on BLOCK - help - Minix is a simple operating system used in many classes about OS's. - The minix file system (method to organize files on a hard disk - partition or a floppy disk) was the original file system for Linux, - but has been superseded by the second extended file system ext2fs. - You don't want to use the minix file system on your hard disk - because of certain built-in restrictions, but it is sometimes found - on older Linux floppy disks. This option will enlarge your kernel - by about 28 KB. If unsure, say N. - - To compile this file system support as a module, choose M here: the - module will be called minix. Note that the file system of your root - partition (the one containing the directory /) cannot be compiled as - a module. - -config OMFS_FS - tristate "SonicBlue Optimized MPEG File System support" - depends on BLOCK - select CRC_ITU_T - help - This is the proprietary file system used by the Rio Karma music - player and ReplayTV DVR. Despite the name, this filesystem is not - more efficient than a standard FS for MPEG files, in fact likely - the opposite is true. Say Y if you have either of these devices - and wish to mount its disk. - - To compile this file system support as a module, choose M here: the - module will be called omfs. If unsure, say N. - -config HPFS_FS - tristate "OS/2 HPFS file system support" - depends on BLOCK - help - OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS - is the file system used for organizing files on OS/2 hard disk - partitions. Say Y if you want to be able to read files from and - write files to an OS/2 HPFS partition on your hard drive. OS/2 - floppies however are in regular MSDOS format, so you don't need this - option in order to be able to read them. Read - <file:Documentation/filesystems/hpfs.txt>. - - To compile this file system support as a module, choose M here: the - module will be called hpfs. If unsure, say N. - - -config QNX4FS_FS - tristate "QNX4 file system support (read only)" - depends on BLOCK - help - This is the file system used by the real-time operating systems - QNX 4 and QNX 6 (the latter is also called QNX RTP). - Further information is available at <http://www.qnx.com/>. - Say Y if you intend to mount QNX hard disks or floppies. - Unless you say Y to "QNX4FS read-write support" below, you will - only be able to read these file systems. - - To compile this file system support as a module, choose M here: the - module will be called qnx4. - - If you don't know whether you need it, then you don't need it: - answer N. - -config QNX4FS_RW - bool "QNX4FS write support (DANGEROUS)" - depends on QNX4FS_FS && EXPERIMENTAL && BROKEN - help - Say Y if you want to test write support for QNX4 file systems. - - It's currently broken, so for now: - answer N. - -config ROMFS_FS - tristate "ROM file system support" - depends on BLOCK - ---help--- - This is a very small read-only file system mainly intended for - initial ram disks of installation disks, but it could be used for - other read-only media as well. Read - <file:Documentation/filesystems/romfs.txt> for details. - - To compile this file system support as a module, choose M here: the - module will be called romfs. Note that the file system of your - root partition (the one containing the directory /) cannot be a - module. - - If you don't know whether you need it, then you don't need it: - answer N. - - -config SYSV_FS - tristate "System V/Xenix/V7/Coherent file system support" - depends on BLOCK - help - SCO, Xenix and Coherent are commercial Unix systems for Intel - machines, and Version 7 was used on the DEC PDP-11. Saying Y - here would allow you to read from their floppies and hard disk - partitions. - - If you have floppies or hard disk partitions like that, it is likely - that they contain binaries from those other Unix systems; in order - to run these binaries, you will want to install linux-abi which is - a set of kernel modules that lets you run SCO, Xenix, Wyse, - UnixWare, Dell Unix and System V programs under Linux. It is - available via FTP (user: ftp) from - <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>). - NOTE: that will work only for binaries from Intel-based systems; - PDP ones will have to wait until somebody ports Linux to -11 ;-) - - If you only intend to mount files from some other Unix over the - network using NFS, you don't need the System V file system support - (but you need NFS file system support obviously). - - Note that this option is generally not needed for floppies, since a - good portable way to transport files and directories between unixes - (and even other operating systems) is given by the tar program ("man - tar" or preferably "info tar"). Note also that this option has - nothing whatsoever to do with the option "System V IPC". Read about - the System V file system in - <file:Documentation/filesystems/sysv-fs.txt>. - Saying Y here will enlarge your kernel by about 27 KB. - - To compile this as a module, choose M here: the module will be called - sysv. - - If you haven't heard about all of this before, it's safe to say N. - - -config UFS_FS - tristate "UFS file system support (read only)" - depends on BLOCK - help - BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD, - OpenBSD and NeXTstep) use a file system called UFS. Some System V - Unixes can create and mount hard disk partitions and diskettes using - this file system as well. Saying Y here will allow you to read from - these partitions; if you also want to write to them, say Y to the - experimental "UFS file system write support", below. Please read the - file <file:Documentation/filesystems/ufs.txt> for more information. - - The recently released UFS2 variant (used in FreeBSD 5.x) is - READ-ONLY supported. - - Note that this option is generally not needed for floppies, since a - good portable way to transport files and directories between unixes - (and even other operating systems) is given by the tar program ("man - tar" or preferably "info tar"). - - When accessing NeXTstep files, you may need to convert them from the - NeXT character set to the Latin1 character set; use the program - recode ("info recode") for this purpose. - - To compile the UFS file system support as a module, choose M here: the - module will be called ufs. - - If you haven't heard about all of this before, it's safe to say N. - -config UFS_FS_WRITE - bool "UFS file system write support (DANGEROUS)" - depends on UFS_FS && EXPERIMENTAL - help - Say Y here if you want to try writing to UFS partitions. This is - experimental, so you should back up your UFS partitions beforehand. - -config UFS_DEBUG - bool "UFS debugging" - depends on UFS_FS - help - If you are experiencing any problems with the UFS filesystem, say - Y here. This will result in _many_ additional debugging messages to be - written to the system log. +source "fs/cramfs/Kconfig" +source "fs/squashfs/Kconfig" +source "fs/freevxfs/Kconfig" +source "fs/minix/Kconfig" +source "fs/omfs/Kconfig" +source "fs/hpfs/Kconfig" +source "fs/qnx4/Kconfig" +source "fs/romfs/Kconfig" +source "fs/sysv/Kconfig" +source "fs/ufs/Kconfig" endif # MISC_FILESYSTEMS @@ -1193,173 +241,8 @@ menuconfig NETWORK_FILESYSTEMS if NETWORK_FILESYSTEMS -config NFS_FS - tristate "NFS client support" - depends on INET - select LOCKD - select SUNRPC - select NFS_ACL_SUPPORT if NFS_V3_ACL - help - Choose Y here if you want to access files residing on other - computers using Sun's Network File System protocol. To compile - this file system support as a module, choose M here: the module - will be called nfs. - - To mount file systems exported by NFS servers, you also need to - install the user space mount.nfs command which can be found in - the Linux nfs-utils package, available from http://linux-nfs.org/. - Information about using the mount command is available in the - mount(8) man page. More detail about the Linux NFS client - implementation is available via the nfs(5) man page. - - Below you can choose which versions of the NFS protocol are - available in the kernel to mount NFS servers. Support for NFS - version 2 (RFC 1094) is always available when NFS_FS is selected. - - To configure a system which mounts its root file system via NFS - at boot time, say Y here, select "Kernel level IP - autoconfiguration" in the NETWORK menu, and select "Root file - system on NFS" below. You cannot compile this file system as a - module in this case. - - If unsure, say N. - -config NFS_V3 - bool "NFS client support for NFS version 3" - depends on NFS_FS - help - This option enables support for version 3 of the NFS protocol - (RFC 1813) in the kernel's NFS client. - - If unsure, say Y. - -config NFS_V3_ACL - bool "NFS client support for the NFSv3 ACL protocol extension" - depends on NFS_V3 - help - Some NFS servers support an auxiliary NFSv3 ACL protocol that - Sun added to Solaris but never became an official part of the - NFS version 3 protocol. This protocol extension allows - applications on NFS clients to manipulate POSIX Access Control - Lists on files residing on NFS servers. NFS servers enforce - ACLs on local files whether this protocol is available or not. - - Choose Y here if your NFS server supports the Solaris NFSv3 ACL - protocol extension and you want your NFS client to allow - applications to access and modify ACLs on files on the server. - - Most NFS servers don't support the Solaris NFSv3 ACL protocol - extension. You can choose N here or specify the "noacl" mount - option to prevent your NFS client from trying to use the NFSv3 - ACL protocol. - - If unsure, say N. - -config NFS_V4 - bool "NFS client support for NFS version 4 (EXPERIMENTAL)" - depends on NFS_FS && EXPERIMENTAL - select RPCSEC_GSS_KRB5 - help - This option enables support for version 4 of the NFS protocol - (RFC 3530) in the kernel's NFS client. - - To mount NFS servers using NFSv4, you also need to install user - space programs which can be found in the Linux nfs-utils package, - available from http://linux-nfs.org/. - - If unsure, say N. - -config ROOT_NFS - bool "Root file system on NFS" - depends on NFS_FS=y && IP_PNP - help - If you want your system to mount its root file system via NFS, - choose Y here. This is common practice for managing systems - without local permanent storage. For details, read - <file:Documentation/filesystems/nfsroot.txt>. - - Most people say N here. - -config NFSD - tristate "NFS server support" - depends on INET - select LOCKD - select SUNRPC - select EXPORTFS - select NFS_ACL_SUPPORT if NFSD_V2_ACL - help - Choose Y here if you want to allow other computers to access - files residing on this system using Sun's Network File System - protocol. To compile the NFS server support as a module, - choose M here: the module will be called nfsd. - - You may choose to use a user-space NFS server instead, in which - case you can choose N here. - - To export local file systems using NFS, you also need to install - user space programs which can be found in the Linux nfs-utils - package, available from http://linux-nfs.org/. More detail about - the Linux NFS server implementation is available via the - exports(5) man page. - - Below you can choose which versions of the NFS protocol are - available to clients mounting the NFS server on this system. - Support for NFS version 2 (RFC 1094) is always available when - CONFIG_NFSD is selected. - - If unsure, say N. - -config NFSD_V2_ACL - bool - depends on NFSD - -config NFSD_V3 - bool "NFS server support for NFS version 3" - depends on NFSD - help - This option enables support in your system's NFS server for - version 3 of the NFS protocol (RFC 1813). - - If unsure, say Y. - -config NFSD_V3_ACL - bool "NFS server support for the NFSv3 ACL protocol extension" - depends on NFSD_V3 - select NFSD_V2_ACL - help - Solaris NFS servers support an auxiliary NFSv3 ACL protocol that - never became an official part of the NFS version 3 protocol. - This protocol extension allows applications on NFS clients to - manipulate POSIX Access Control Lists on files residing on NFS - servers. NFS servers enforce POSIX ACLs on local files whether - this protocol is available or not. - - This option enables support in your system's NFS server for the - NFSv3 ACL protocol extension allowing NFS clients to manipulate - POSIX ACLs on files exported by your system's NFS server. NFS - clients which support the Solaris NFSv3 ACL protocol can then - access and modify ACLs on your NFS server. - - To store ACLs on your NFS server, you also need to enable ACL- - related CONFIG options for your local file systems of choice. - - If unsure, say N. - -config NFSD_V4 - bool "NFS server support for NFS version 4 (EXPERIMENTAL)" - depends on NFSD && PROC_FS && EXPERIMENTAL - select NFSD_V3 - select FS_POSIX_ACL - select RPCSEC_GSS_KRB5 - help - This option enables support in your system's NFS server for - version 4 of the NFS protocol (RFC 3530). - - To export files using NFSv4, you need to install additional user - space programs which can be found in the Linux nfs-utils package, - available from http://linux-nfs.org/. - - If unsure, say N. +source "fs/nfs/Kconfig" +source "fs/nfsd/Kconfig" config LOCKD tristate @@ -1381,221 +264,13 @@ config NFS_COMMON depends on NFSD || NFS_FS default y -config SUNRPC - tristate - -config SUNRPC_GSS - tristate - -config SUNRPC_XPRT_RDMA - tristate - depends on SUNRPC && INFINIBAND && EXPERIMENTAL - default SUNRPC && INFINIBAND - help - This option enables an RPC client transport capability that - allows the NFS client to mount servers via an RDMA-enabled - transport. - - To compile RPC client RDMA transport support as a module, - choose M here: the module will be called xprtrdma. - - If unsure, say N. - -config SUNRPC_REGISTER_V4 - bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)" - depends on SUNRPC && EXPERIMENTAL - default n - help - Sun added support for registering RPC services at an IPv6 - address by creating two new versions of the rpcbind protocol - (RFC 1833). - - This option enables support in the kernel RPC server for - registering kernel RPC services via version 4 of the rpcbind - protocol. If you enable this option, you must run a portmapper - daemon that supports rpcbind protocol version 4. - - Serving NFS over IPv6 from knfsd (the kernel's NFS server) - requires that you enable this option and use a portmapper that - supports rpcbind version 4. - - If unsure, say N to get traditional behavior (register kernel - RPC services using only rpcbind version 2). Distributions - using the legacy Linux portmapper daemon must say N here. - -config RPCSEC_GSS_KRB5 - tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)" - depends on SUNRPC && EXPERIMENTAL - select SUNRPC_GSS - select CRYPTO - select CRYPTO_MD5 - select CRYPTO_DES - select CRYPTO_CBC - help - Choose Y here to enable Secure RPC using the Kerberos version 5 - GSS-API mechanism (RFC 1964). - - Secure RPC calls with Kerberos require an auxiliary user-space - daemon which may be found in the Linux nfs-utils package - available from http://linux-nfs.org/. In addition, user-space - Kerberos support should be installed. - - If unsure, say N. - -config RPCSEC_GSS_SPKM3 - tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)" - depends on SUNRPC && EXPERIMENTAL - select SUNRPC_GSS - select CRYPTO - select CRYPTO_MD5 - select CRYPTO_DES - select CRYPTO_CAST5 - select CRYPTO_CBC - help - Choose Y here to enable Secure RPC using the SPKM3 public key - GSS-API mechansim (RFC 2025). - - Secure RPC calls with SPKM3 require an auxiliary userspace - daemon which may be found in the Linux nfs-utils package - available from http://linux-nfs.org/. - - If unsure, say N. - -config SMB_FS - tristate "SMB file system support (OBSOLETE, please use CIFS)" - depends on INET - select NLS - help - SMB (Server Message Block) is the protocol Windows for Workgroups - (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share - files and printers over local networks. Saying Y here allows you to - mount their file systems (often called "shares" in this context) and - access them just like any other Unix directory. Currently, this - works only if the Windows machines use TCP/IP as the underlying - transport protocol, and not NetBEUI. For details, read - <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - Note: if you just want your box to act as an SMB *server* and make - files and printing services available to Windows clients (which need - to have a TCP/IP stack), you don't need to say Y here; you can use - the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>) - for that. - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. - - To compile the SMB support as a module, choose M here: - the module will be called smbfs. Most people say N, however. - -config SMB_NLS_DEFAULT - bool "Use a default NLS" - depends on SMB_FS - help - Enabling this will make smbfs use nls translations by default. You - need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls - settings and you need to give the default nls for the SMB server as - CONFIG_SMB_NLS_REMOTE. - - The nls settings can be changed at mount time, if your smbmount - supports that, using the codepage and iocharset parameters. - - smbmount from samba 2.2.0 or later supports this. - -config SMB_NLS_REMOTE - string "Default Remote NLS Option" - depends on SMB_NLS_DEFAULT - default "cp437" - help - This setting allows you to specify a default value for which - codepage the server uses. If this field is left blank no - translations will be done by default. The local codepage/charset - default to CONFIG_NLS_DEFAULT. - - The nls settings can be changed at mount time, if your smbmount - supports that, using the codepage and iocharset parameters. - - smbmount from samba 2.2.0 or later supports this. - +source "net/sunrpc/Kconfig" +source "fs/smbfs/Kconfig" source "fs/cifs/Kconfig" - -config NCP_FS - tristate "NCP file system support (to mount NetWare volumes)" - depends on IPX!=n || INET - help - NCP (NetWare Core Protocol) is a protocol that runs over IPX and is - used by Novell NetWare clients to talk to file servers. It is to - IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you - to mount NetWare file server volumes and to access them just like - any other Unix directory. For details, please read the file - <file:Documentation/filesystems/ncpfs.txt> in the kernel source and - the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>. - - You do not have to say Y here if you want your Linux box to act as a - file *server* for Novell NetWare clients. - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. - - To compile this as a module, choose M here: the module will be called - ncpfs. Say N unless you are connected to a Novell network. - source "fs/ncpfs/Kconfig" - -config CODA_FS - tristate "Coda file system support (advanced network fs)" - depends on INET - help - Coda is an advanced network file system, similar to NFS in that it - enables you to mount file systems of a remote server and access them - with regular Unix commands as if they were sitting on your hard - disk. Coda has several advantages over NFS: support for - disconnected operation (e.g. for laptops), read/write server - replication, security model for authentication and encryption, - persistent client caches and write back caching. - - If you say Y here, your Linux box will be able to act as a Coda - *client*. You will need user level code as well, both for the - client and server. Servers are currently user level, i.e. they need - no kernel support. Please read - <file:Documentation/filesystems/coda.txt> and check out the Coda - home page <http://www.coda.cs.cmu.edu/>. - - To compile the coda client support as a module, choose M here: the - module will be called coda. - -config AFS_FS - tristate "Andrew File System support (AFS) (EXPERIMENTAL)" - depends on INET && EXPERIMENTAL - select AF_RXRPC - help - If you say Y here, you will get an experimental Andrew File System - driver. It currently only supports unsecured read-only AFS access. - - See <file:Documentation/filesystems/afs.txt> for more information. - - If unsure, say N. - -config AFS_DEBUG - bool "AFS dynamic debugging" - depends on AFS_FS - help - Say Y here to make runtime controllable debugging messages appear. - - See <file:Documentation/filesystems/afs.txt> for more information. - - If unsure, say N. - -config 9P_FS - tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)" - depends on INET && NET_9P && EXPERIMENTAL - help - If you say Y here, you will get experimental support for - Plan 9 resource sharing via the 9P2000 protocol. - - See <http://v9fs.sf.net> for more information. - - If unsure, say N. +source "fs/coda/Kconfig" +source "fs/afs/Kconfig" +source "fs/9p/Kconfig" endif # NETWORK_FILESYSTEMS diff --git a/fs/adfs/Kconfig b/fs/adfs/Kconfig new file mode 100644 index 000000000000..e55182a74605 --- /dev/null +++ b/fs/adfs/Kconfig @@ -0,0 +1,27 @@ +config ADFS_FS + tristate "ADFS file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + The Acorn Disc Filing System is the standard file system of the + RiscOS operating system which runs on Acorn's ARM-based Risc PC + systems and the Acorn Archimedes range of machines. If you say Y + here, Linux will be able to read from ADFS partitions on hard drives + and from ADFS-formatted floppy discs. If you also want to be able to + write to those devices, say Y to "ADFS write support" below. + + The ADFS partition should be the first partition (i.e., + /dev/[hs]d?1) on each of your drives. Please read the file + <file:Documentation/filesystems/adfs.txt> for further details. + + To compile this code as a module, choose M here: the module will be + called adfs. + + If unsure, say N. + +config ADFS_FS_RW + bool "ADFS write support (DANGEROUS)" + depends on ADFS_FS + help + If you say Y here, you will be able to write to ADFS partitions on + hard drives and ADFS-formatted floppy disks. This is experimental + codes, so if you're unsure, say N. diff --git a/fs/affs/Kconfig b/fs/affs/Kconfig new file mode 100644 index 000000000000..cfad9afb4762 --- /dev/null +++ b/fs/affs/Kconfig @@ -0,0 +1,21 @@ +config AFFS_FS + tristate "Amiga FFS file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + The Fast File System (FFS) is the common file system used on hard + disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y + if you want to be able to read and write files from and to an Amiga + FFS partition on your hard drive. Amiga floppies however cannot be + read with this driver due to an incompatibility of the floppy + controller used in an Amiga and the standard floppy controller in + PCs and workstations. Read <file:Documentation/filesystems/affs.txt> + and <file:fs/affs/Changes>. + + With this driver you can also mount disk files used by Bernd + Schmidt's Un*X Amiga Emulator + (<http://www.freiburg.linux.de/~uae/>). + If you want to do this, you will also need to say Y or M to "Loop + device support", above. + + To compile this file system support as a module, choose M here: the + module will be called affs. If unsure, say N. diff --git a/fs/afs/Kconfig b/fs/afs/Kconfig new file mode 100644 index 000000000000..e7b522fe15e1 --- /dev/null +++ b/fs/afs/Kconfig @@ -0,0 +1,21 @@ +config AFS_FS + tristate "Andrew File System support (AFS) (EXPERIMENTAL)" + depends on INET && EXPERIMENTAL + select AF_RXRPC + help + If you say Y here, you will get an experimental Andrew File System + driver. It currently only supports unsecured read-only AFS access. + + See <file:Documentation/filesystems/afs.txt> for more information. + + If unsure, say N. + +config AFS_DEBUG + bool "AFS dynamic debugging" + depends on AFS_FS + help + Say Y here to make runtime controllable debugging messages appear. + + See <file:Documentation/filesystems/afs.txt> for more information. + + If unsure, say N. diff --git a/fs/autofs/Kconfig b/fs/autofs/Kconfig new file mode 100644 index 000000000000..5f3bea90911e --- /dev/null +++ b/fs/autofs/Kconfig @@ -0,0 +1,21 @@ +config AUTOFS_FS + tristate "Kernel automounter support" + help + The automounter is a tool to automatically mount remote file systems + on demand. This implementation is partially kernel-based to reduce + overhead in the already-mounted case; this is unlike the BSD + automounter (amd), which is a pure user space daemon. + + To use the automounter you need the user-space tools from the autofs + package; you can find the location in <file:Documentation/Changes>. + You also want to answer Y to "NFS file system support", below. + + If you want to use the newer version of the automounter with more + features, say N here and say Y to "Kernel automounter v4 support", + below. + + To compile this support as a module, choose M here: the module will be + called autofs. + + If you are not a part of a fairly large, distributed network, you + probably do not need an automounter, and can say N here. diff --git a/fs/autofs4/Kconfig b/fs/autofs4/Kconfig new file mode 100644 index 000000000000..1204d6384d39 --- /dev/null +++ b/fs/autofs4/Kconfig @@ -0,0 +1,20 @@ +config AUTOFS4_FS + tristate "Kernel automounter version 4 support (also supports v3)" + help + The automounter is a tool to automatically mount remote file systems + on demand. This implementation is partially kernel-based to reduce + overhead in the already-mounted case; this is unlike the BSD + automounter (amd), which is a pure user space daemon. + + To use the automounter you need the user-space tools from + <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also + want to answer Y to "NFS file system support", below. + + To compile this support as a module, choose M here: the module will be + called autofs4. You will need to add "alias autofs autofs4" to your + modules configuration file. + + If you are not a part of a fairly large, distributed network or + don't have a laptop which needs to dynamically reconfigure to the + local network, you probably do not need an automounter, and can say + N here. diff --git a/fs/befs/Kconfig b/fs/befs/Kconfig new file mode 100644 index 000000000000..7835d30f211f --- /dev/null +++ b/fs/befs/Kconfig @@ -0,0 +1,26 @@ +config BEFS_FS + tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + select NLS + help + The BeOS File System (BeFS) is the native file system of Be, Inc's + BeOS. Notable features include support for arbitrary attributes + on files and directories, and database-like indices on selected + attributes. (Also note that this driver doesn't make those features + available at this time). It is a 64 bit filesystem, so it supports + extremely large volumes and files. + + If you use this filesystem, you should also say Y to at least one + of the NLS (native language support) options below. + + If you don't know what this is about, say N. + + To compile this as a module, choose M here: the module will be + called befs. + +config BEFS_DEBUG + bool "Debug BeFS" + depends on BEFS_FS + help + If you say Y here, you can use the 'debug' mount option to enable + debugging output from the driver. diff --git a/fs/bfs/Kconfig b/fs/bfs/Kconfig new file mode 100644 index 000000000000..c2336c62024f --- /dev/null +++ b/fs/bfs/Kconfig @@ -0,0 +1,19 @@ +config BFS_FS + tristate "BFS file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + Boot File System (BFS) is a file system used under SCO UnixWare to + allow the bootloader access to the kernel image and other important + files during the boot process. It is usually mounted under /stand + and corresponds to the slice marked as "STAND" in the UnixWare + partition. You should say Y if you want to read or write the files + on your /stand slice from within Linux. You then also need to say Y + to "UnixWare slices support", below. More information about the BFS + file system is contained in the file + <file:Documentation/filesystems/bfs.txt>. + + If you don't know what this is about, say N. + + To compile this as a module, choose M here: the module will be called + bfs. Note that the file system of your root partition (the one + containing the directory /) cannot be compiled as a module. diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig new file mode 100644 index 000000000000..f8fcf999ea1b --- /dev/null +++ b/fs/btrfs/Kconfig @@ -0,0 +1,18 @@ +config BTRFS_FS + tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format" + depends on EXPERIMENTAL + select LIBCRC32C + select ZLIB_INFLATE + select ZLIB_DEFLATE + help + Btrfs is a new filesystem with extents, writable snapshotting, + support for multiple devices and many more features. + + Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET + FINALIZED. You should say N here unless you are interested in + testing Btrfs with non-critical data. + + To compile this file system support as a module, choose M here. The + module will be called btrfs. + + If unsure, say N. diff --git a/fs/coda/Kconfig b/fs/coda/Kconfig new file mode 100644 index 000000000000..c0e5a7fad06d --- /dev/null +++ b/fs/coda/Kconfig @@ -0,0 +1,21 @@ +config CODA_FS + tristate "Coda file system support (advanced network fs)" + depends on INET + help + Coda is an advanced network file system, similar to NFS in that it + enables you to mount file systems of a remote server and access them + with regular Unix commands as if they were sitting on your hard + disk. Coda has several advantages over NFS: support for + disconnected operation (e.g. for laptops), read/write server + replication, security model for authentication and encryption, + persistent client caches and write back caching. + + If you say Y here, your Linux box will be able to act as a Coda + *client*. You will need user level code as well, both for the + client and server. Servers are currently user level, i.e. they need + no kernel support. Please read + <file:Documentation/filesystems/coda.txt> and check out the Coda + home page <http://www.coda.cs.cmu.edu/>. + + To compile the coda client support as a module, choose M here: the + module will be called coda. diff --git a/fs/configfs/Kconfig b/fs/configfs/Kconfig new file mode 100644 index 000000000000..13587cc97a0b --- /dev/null +++ b/fs/configfs/Kconfig @@ -0,0 +1,11 @@ +config CONFIGFS_FS + tristate "Userspace-driven configuration filesystem" + depends on SYSFS + help + configfs is a ram-based filesystem that provides the converse + of sysfs's functionality. Where sysfs is a filesystem-based + view of kernel objects, configfs is a filesystem-based manager + of kernel objects, or config_items. + + Both sysfs and configfs can and should exist together on the + same system. One is not a replacement for the other. diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig new file mode 100644 index 000000000000..cd06466f365e --- /dev/null +++ b/fs/cramfs/Kconfig @@ -0,0 +1,19 @@ +config CRAMFS + tristate "Compressed ROM file system support (cramfs)" + depends on BLOCK + select ZLIB_INFLATE + help + Saying Y here includes support for CramFs (Compressed ROM File + System). CramFs is designed to be a simple, small, and compressed + file system for ROM based embedded systems. CramFs is read-only, + limited to 256MB file systems (with 16MB files), and doesn't support + 16/32 bits uid/gid, hard links and timestamps. + + See <file:Documentation/filesystems/cramfs.txt> and + <file:fs/cramfs/README> for further information. + + To compile this as a module, choose M here: the module will be called + cramfs. Note that the root file system (the one containing the + directory /) cannot be compiled as a module. + + If unsure, say N. diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig new file mode 100644 index 000000000000..0c754e64232b --- /dev/null +++ b/fs/ecryptfs/Kconfig @@ -0,0 +1,11 @@ +config ECRYPT_FS + tristate "eCrypt filesystem layer support (EXPERIMENTAL)" + depends on EXPERIMENTAL && KEYS && CRYPTO && NET + help + Encrypted filesystem that operates on the VFS layer. See + <file:Documentation/filesystems/ecryptfs.txt> to learn more about + eCryptfs. Userspace components are required and can be + obtained from <http://ecryptfs.sf.net>. + + To compile this file system support as a module, choose M here: the + module will be called ecryptfs. diff --git a/fs/efs/Kconfig b/fs/efs/Kconfig new file mode 100644 index 000000000000..6ebfc1c207a8 --- /dev/null +++ b/fs/efs/Kconfig @@ -0,0 +1,14 @@ +config EFS_FS + tristate "EFS file system support (read only) (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + EFS is an older file system used for non-ISO9660 CD-ROMs and hard + disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer + uses the XFS file system for hard disk partitions however). + + This implementation only offers read-only access. If you don't know + what all this is about, it's safe to say N. For more information + about EFS see its home page at <http://aeschi.ch.eu.org/efs/>. + + To compile the EFS file system support as a module, choose M here: the + module will be called efs. diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig new file mode 100644 index 000000000000..d0a69ff25375 --- /dev/null +++ b/fs/fat/Kconfig @@ -0,0 +1,97 @@ +config FAT_FS + tristate + select NLS + help + If you want to use one of the FAT-based file systems (the MS-DOS and + VFAT (Windows 95) file systems), then you must say Y or M here + to include FAT support. You will then be able to mount partitions or + diskettes with FAT-based file systems and transparently access the + files on them, i.e. MSDOS files will look and behave just like all + other Unix files. + + This FAT support is not a file system in itself, it only provides + the foundation for the other file systems. You will have to say Y or + M to at least one of "MSDOS fs support" or "VFAT fs support" in + order to make use of it. + + Another way to read and write MSDOS floppies and hard drive + partitions from within Linux (but not transparently) is with the + mtools ("man mtools") program suite. You don't need to say Y here in + order to do that. + + If you need to move large files on floppies between a DOS and a + Linux box, say Y here, mount the floppy under Linux with an MSDOS + file system and use GNU tar's M option. GNU tar is a program + available for Unix and DOS ("man tar" or "info tar"). + + The FAT support will enlarge your kernel by about 37 KB. If unsure, + say Y. + + To compile this as a module, choose M here: the module will be called + fat. Note that if you compile the FAT support as a module, you + cannot compile any of the FAT-based file systems into the kernel + -- they will have to be modules as well. + +config MSDOS_FS + tristate "MSDOS fs support" + select FAT_FS + help + This allows you to mount MSDOS partitions of your hard drive (unless + they are compressed; to access compressed MSDOS partitions under + Linux, you can either use the DOS emulator DOSEMU, described in the + DOSEMU-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in + <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you + intend to use dosemu with a non-compressed MSDOS partition, say Y + here) and MSDOS floppies. This means that file access becomes + transparent, i.e. the MSDOS files look and behave just like all + other Unix files. + + If you have Windows 95 or Windows NT installed on your MSDOS + partitions, you should use the VFAT file system (say Y to "VFAT fs + support" below), or you will not be able to see the long filenames + generated by Windows 95 / Windows NT. + + This option will enlarge your kernel by about 7 KB. If unsure, + answer Y. This will only work if you said Y to "DOS FAT fs support" + as well. To compile this as a module, choose M here: the module will + be called msdos. + +config VFAT_FS + tristate "VFAT (Windows-95) fs support" + select FAT_FS + help + This option provides support for normal Windows file systems with + long filenames. That includes non-compressed FAT-based file systems + used by Windows 95, Windows 98, Windows NT 4.0, and the Unix + programs from the mtools package. + + The VFAT support enlarges your kernel by about 10 KB and it only + works if you said Y to the "DOS FAT fs support" above. Please read + the file <file:Documentation/filesystems/vfat.txt> for details. If + unsure, say Y. + + To compile this as a module, choose M here: the module will be called + vfat. + +config FAT_DEFAULT_CODEPAGE + int "Default codepage for FAT" + depends on MSDOS_FS || VFAT_FS + default 437 + help + This option should be set to the codepage of your FAT filesystems. + It can be overridden with the "codepage" mount option. + See <file:Documentation/filesystems/vfat.txt> for more information. + +config FAT_DEFAULT_IOCHARSET + string "Default iocharset for FAT" + depends on VFAT_FS + default "iso8859-1" + help + Set this to the default input/output character set you'd + like FAT to use. It should probably match the character set + that most of your FAT filesystems use, and can be overridden + with the "iocharset" mount option for FAT filesystems. + Note that "utf8" is not recommended for FAT filesystems. + If unsure, you shouldn't set "utf8" here. + See <file:Documentation/filesystems/vfat.txt> for more information. diff --git a/fs/freevxfs/Kconfig b/fs/freevxfs/Kconfig new file mode 100644 index 000000000000..8dc1cd5c1efe --- /dev/null +++ b/fs/freevxfs/Kconfig @@ -0,0 +1,16 @@ +config VXFS_FS + tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" + depends on BLOCK + help + FreeVxFS is a file system driver that support the VERITAS VxFS(TM) + file system format. VERITAS VxFS(TM) is the standard file system + of SCO UnixWare (and possibly others) and optionally available + for Sunsoft Solaris, HP-UX and many other operating systems. + Currently only readonly access is supported. + + NOTE: the file system type as used by mount(1), mount(2) and + fstab(5) is 'vxfs' as it describes the file system format, not + the actual driver. + + To compile this as a module, choose M here: the module will be + called freevxfs. If unsure, say N. diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig new file mode 100644 index 000000000000..0cf160a94eda --- /dev/null +++ b/fs/fuse/Kconfig @@ -0,0 +1,15 @@ +config FUSE_FS + tristate "FUSE (Filesystem in Userspace) support" + help + With FUSE it is possible to implement a fully functional filesystem + in a userspace program. + + There's also companion library: libfuse. This library along with + utilities is available from the FUSE homepage: + <http://fuse.sourceforge.net/> + + See <file:Documentation/filesystems/fuse.txt> for more information. + See <file:Documentation/Changes> for needed library/utility version. + + If you want to develop a userspace FS, or if you want to use + a filesystem based on FUSE, answer Y or M. diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index e0c7ada08a1f..ba76b68c52ff 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -281,7 +281,8 @@ __releases(&fc->lock) fc->blocked = 0; wake_up_all(&fc->blocked_waitq); } - if (fc->num_background == FUSE_CONGESTION_THRESHOLD) { + if (fc->num_background == FUSE_CONGESTION_THRESHOLD && + fc->connected) { clear_bdi_congested(&fc->bdi, READ); clear_bdi_congested(&fc->bdi, WRITE); } @@ -825,16 +826,21 @@ static int fuse_notify_poll(struct fuse_conn *fc, unsigned int size, struct fuse_copy_state *cs) { struct fuse_notify_poll_wakeup_out outarg; - int err; + int err = -EINVAL; if (size != sizeof(outarg)) - return -EINVAL; + goto err; err = fuse_copy_one(cs, &outarg, sizeof(outarg)); if (err) - return err; + goto err; + fuse_copy_finish(cs); return fuse_notify_poll_wakeup(fc, &outarg); + +err: + fuse_copy_finish(cs); + return err; } static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code, @@ -845,6 +851,7 @@ static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code, return fuse_notify_poll(fc, size, cs); default: + fuse_copy_finish(cs); return -EINVAL; } } @@ -923,7 +930,6 @@ static ssize_t fuse_dev_write(struct kiocb *iocb, const struct iovec *iov, */ if (!oh.unique) { err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), &cs); - fuse_copy_finish(&cs); return err ? err : nbytes; } diff --git a/fs/fuse/file.c b/fs/fuse/file.c index e8162646a9b5..d9fdb7cec538 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -54,7 +54,7 @@ struct fuse_file *fuse_file_alloc(struct fuse_conn *fc) ff->reserved_req = fuse_request_alloc(); if (!ff->reserved_req) { kfree(ff); - ff = NULL; + return NULL; } else { INIT_LIST_HEAD(&ff->write_entry); atomic_set(&ff->count, 0); diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 47c96fdca1ac..459b73dd45e1 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -292,6 +292,7 @@ static void fuse_put_super(struct super_block *sb) list_del(&fc->entry); fuse_ctl_remove_conn(fc); mutex_unlock(&fuse_mutex); + bdi_destroy(&fc->bdi); fuse_conn_put(fc); } @@ -532,7 +533,6 @@ void fuse_conn_put(struct fuse_conn *fc) if (fc->destroy_req) fuse_request_free(fc->destroy_req); mutex_destroy(&fc->inst_mutex); - bdi_destroy(&fc->bdi); fc->release(fc); } } @@ -805,16 +805,18 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) int err; int is_bdev = sb->s_bdev != NULL; + err = -EINVAL; if (sb->s_flags & MS_MANDLOCK) - return -EINVAL; + goto err; if (!parse_fuse_opt((char *) data, &d, is_bdev)) - return -EINVAL; + goto err; if (is_bdev) { #ifdef CONFIG_BLOCK + err = -EINVAL; if (!sb_set_blocksize(sb, d.blksize)) - return -EINVAL; + goto err; #endif } else { sb->s_blocksize = PAGE_CACHE_SIZE; @@ -826,20 +828,22 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) sb->s_export_op = &fuse_export_operations; file = fget(d.fd); + err = -EINVAL; if (!file) - return -EINVAL; + goto err; if (file->f_op != &fuse_dev_operations) - return -EINVAL; + goto err_fput; fc = kmalloc(sizeof(*fc), GFP_KERNEL); + err = -ENOMEM; if (!fc) - return -ENOMEM; + goto err_fput; err = fuse_conn_init(fc, sb); if (err) { kfree(fc); - return err; + goto err_fput; } fc->release = fuse_free_conn; @@ -854,12 +858,12 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) err = -ENOMEM; root = fuse_get_root_inode(sb, d.rootmode); if (!root) - goto err; + goto err_put_conn; root_dentry = d_alloc_root(root); if (!root_dentry) { iput(root); - goto err; + goto err_put_conn; } init_req = fuse_request_alloc(); @@ -903,9 +907,11 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) fuse_request_free(init_req); err_put_root: dput(root_dentry); - err: - fput(file); + err_put_conn: fuse_conn_put(fc); + err_fput: + fput(file); + err: return err; } diff --git a/fs/hfs/Kconfig b/fs/hfs/Kconfig new file mode 100644 index 000000000000..b77c5bc20f8a --- /dev/null +++ b/fs/hfs/Kconfig @@ -0,0 +1,12 @@ +config HFS_FS + tristate "Apple Macintosh file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + select NLS + help + If you say Y here, you will be able to mount Macintosh-formatted + floppy disks and hard drive partitions with full read-write access. + Please read <file:Documentation/filesystems/hfs.txt> to learn about + the available mount options. + + To compile this file system support as a module, choose M here: the + module will be called hfs. diff --git a/fs/hfsplus/Kconfig b/fs/hfsplus/Kconfig new file mode 100644 index 000000000000..a63371815aab --- /dev/null +++ b/fs/hfsplus/Kconfig @@ -0,0 +1,13 @@ +config HFSPLUS_FS + tristate "Apple Extended HFS file system support" + depends on BLOCK + select NLS + select NLS_UTF8 + help + If you say Y here, you will be able to mount extended format + Macintosh-formatted hard drive partitions with full read-write access. + + This file system is often called HFS+ and was introduced with + MacOS 8. It includes all Mac specific filesystem data such as + data forks and creator codes, but it also has several UNIX + style features such as file ownership and permissions. diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig new file mode 100644 index 000000000000..56bd15c5bf6c --- /dev/null +++ b/fs/hpfs/Kconfig @@ -0,0 +1,14 @@ +config HPFS_FS + tristate "OS/2 HPFS file system support" + depends on BLOCK + help + OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS + is the file system used for organizing files on OS/2 hard disk + partitions. Say Y if you want to be able to read files from and + write files to an OS/2 HPFS partition on your hard drive. OS/2 + floppies however are in regular MSDOS format, so you don't need this + option in order to be able to read them. Read + <file:Documentation/filesystems/hpfs.txt>. + + To compile this file system support as a module, choose M here: the + module will be called hpfs. If unsure, say N. diff --git a/fs/isofs/Kconfig b/fs/isofs/Kconfig new file mode 100644 index 000000000000..8ab9878e3671 --- /dev/null +++ b/fs/isofs/Kconfig @@ -0,0 +1,39 @@ +config ISO9660_FS + tristate "ISO 9660 CDROM file system support" + help + This is the standard file system used on CD-ROMs. It was previously + known as "High Sierra File System" and is called "hsfs" on other + Unix systems. The so-called Rock-Ridge extensions which allow for + long Unix filenames and symbolic links are also supported by this + driver. If you have a CD-ROM drive and want to do more with it than + just listen to audio CDs and watch its LEDs, say Y (and read + <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO, + available from <http://www.tldp.org/docs.html#howto>), thereby + enlarging your kernel by about 27 KB; otherwise say N. + + To compile this file system support as a module, choose M here: the + module will be called isofs. + +config JOLIET + bool "Microsoft Joliet CDROM extensions" + depends on ISO9660_FS + select NLS + help + Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system + which allows for long filenames in unicode format (unicode is the + new 16 bit character code, successor to ASCII, which encodes the + characters of almost all languages of the world; see + <http://www.unicode.org/> for more information). Say Y here if you + want to be able to read Joliet CD-ROMs under Linux. + +config ZISOFS + bool "Transparent decompression extension" + depends on ISO9660_FS + select ZLIB_INFLATE + help + This is a Linux-specific extension to RockRidge which lets you store + data in compressed form on a CD-ROM and have it transparently + decompressed when the CD-ROM is accessed. See + <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools + necessary to create such a filesystem. Say Y here if you want to be + able to read such compressed CD-ROMs. diff --git a/fs/jfs/Kconfig b/fs/jfs/Kconfig new file mode 100644 index 000000000000..9ff619a6f9cc --- /dev/null +++ b/fs/jfs/Kconfig @@ -0,0 +1,49 @@ +config JFS_FS + tristate "JFS filesystem support" + select NLS + help + This is a port of IBM's Journaled Filesystem . More information is + available in the file <file:Documentation/filesystems/jfs.txt>. + + If you do not intend to use the JFS filesystem, say N. + +config JFS_POSIX_ACL + bool "JFS POSIX Access Control Lists" + depends on JFS_FS + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website <http://acl.bestbits.at/>. + + If you don't know what Access Control Lists are, say N + +config JFS_SECURITY + bool "JFS Security Labels" + depends on JFS_FS + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the jfs filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. + +config JFS_DEBUG + bool "JFS debugging" + depends on JFS_FS + help + If you are experiencing any problems with the JFS filesystem, say + Y here. This will result in additional debugging messages to be + written to the system log. Under normal circumstances, this + results in very little overhead. + +config JFS_STATISTICS + bool "JFS statistics" + depends on JFS_FS + help + Enabling this option will cause statistics from the JFS file system + to be made available to the user in the /proc/fs/jfs/ directory. diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig new file mode 100644 index 000000000000..0fd7ca994264 --- /dev/null +++ b/fs/minix/Kconfig @@ -0,0 +1,17 @@ +config MINIX_FS + tristate "Minix file system support" + depends on BLOCK + help + Minix is a simple operating system used in many classes about OS's. + The minix file system (method to organize files on a hard disk + partition or a floppy disk) was the original file system for Linux, + but has been superseded by the second extended file system ext2fs. + You don't want to use the minix file system on your hard disk + because of certain built-in restrictions, but it is sometimes found + on older Linux floppy disks. This option will enlarge your kernel + by about 28 KB. If unsure, say N. + + To compile this file system support as a module, choose M here: the + module will be called minix. Note that the file system of your root + partition (the one containing the directory /) cannot be compiled as + a module. diff --git a/fs/ncpfs/Kconfig b/fs/ncpfs/Kconfig index 142808427b25..c931cf22a1f6 100644 --- a/fs/ncpfs/Kconfig +++ b/fs/ncpfs/Kconfig @@ -1,6 +1,27 @@ # # NCP Filesystem configuration # +config NCP_FS + tristate "NCP file system support (to mount NetWare volumes)" + depends on IPX!=n || INET + help + NCP (NetWare Core Protocol) is a protocol that runs over IPX and is + used by Novell NetWare clients to talk to file servers. It is to + IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you + to mount NetWare file server volumes and to access them just like + any other Unix directory. For details, please read the file + <file:Documentation/filesystems/ncpfs.txt> in the kernel source and + the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>. + + You do not have to say Y here if you want your Linux box to act as a + file *server* for Novell NetWare clients. + + General information about how to connect Linux, Windows machines and + Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. + + To compile this as a module, choose M here: the module will be called + ncpfs. Say N unless you are connected to a Novell network. + config NCPFS_PACKET_SIGNING bool "Packet signatures" depends on NCP_FS diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig new file mode 100644 index 000000000000..36fe20d6eba2 --- /dev/null +++ b/fs/nfs/Kconfig @@ -0,0 +1,86 @@ +config NFS_FS + tristate "NFS client support" + depends on INET + select LOCKD + select SUNRPC + select NFS_ACL_SUPPORT if NFS_V3_ACL + help + Choose Y here if you want to access files residing on other + computers using Sun's Network File System protocol. To compile + this file system support as a module, choose M here: the module + will be called nfs. + + To mount file systems exported by NFS servers, you also need to + install the user space mount.nfs command which can be found in + the Linux nfs-utils package, available from http://linux-nfs.org/. + Information about using the mount command is available in the + mount(8) man page. More detail about the Linux NFS client + implementation is available via the nfs(5) man page. + + Below you can choose which versions of the NFS protocol are + available in the kernel to mount NFS servers. Support for NFS + version 2 (RFC 1094) is always available when NFS_FS is selected. + + To configure a system which mounts its root file system via NFS + at boot time, say Y here, select "Kernel level IP + autoconfiguration" in the NETWORK menu, and select "Root file + system on NFS" below. You cannot compile this file system as a + module in this case. + + If unsure, say N. + +config NFS_V3 + bool "NFS client support for NFS version 3" + depends on NFS_FS + help + This option enables support for version 3 of the NFS protocol + (RFC 1813) in the kernel's NFS client. + + If unsure, say Y. + +config NFS_V3_ACL + bool "NFS client support for the NFSv3 ACL protocol extension" + depends on NFS_V3 + help + Some NFS servers support an auxiliary NFSv3 ACL protocol that + Sun added to Solaris but never became an official part of the + NFS version 3 protocol. This protocol extension allows + applications on NFS clients to manipulate POSIX Access Control + Lists on files residing on NFS servers. NFS servers enforce + ACLs on local files whether this protocol is available or not. + + Choose Y here if your NFS server supports the Solaris NFSv3 ACL + protocol extension and you want your NFS client to allow + applications to access and modify ACLs on files on the server. + + Most NFS servers don't support the Solaris NFSv3 ACL protocol + extension. You can choose N here or specify the "noacl" mount + option to prevent your NFS client from trying to use the NFSv3 + ACL protocol. + + If unsure, say N. + +config NFS_V4 + bool "NFS client support for NFS version 4 (EXPERIMENTAL)" + depends on NFS_FS && EXPERIMENTAL + select RPCSEC_GSS_KRB5 + help + This option enables support for version 4 of the NFS protocol + (RFC 3530) in the kernel's NFS client. + + To mount NFS servers using NFSv4, you also need to install user + space programs which can be found in the Linux nfs-utils package, + available from http://linux-nfs.org/. + + If unsure, say N. + +config ROOT_NFS + bool "Root file system on NFS" + depends on NFS_FS=y && IP_PNP + help + If you want your system to mount its root file system via NFS, + choose Y here. This is common practice for managing systems + without local permanent storage. For details, read + <file:Documentation/filesystems/nfsroot.txt>. + + Most people say N here. diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig new file mode 100644 index 000000000000..44d7d04dab95 --- /dev/null +++ b/fs/nfsd/Kconfig @@ -0,0 +1,80 @@ +config NFSD + tristate "NFS server support" + depends on INET + select LOCKD + select SUNRPC + select EXPORTFS + select NFS_ACL_SUPPORT if NFSD_V2_ACL + help + Choose Y here if you want to allow other computers to access + files residing on this system using Sun's Network File System + protocol. To compile the NFS server support as a module, + choose M here: the module will be called nfsd. + + You may choose to use a user-space NFS server instead, in which + case you can choose N here. + + To export local file systems using NFS, you also need to install + user space programs which can be found in the Linux nfs-utils + package, available from http://linux-nfs.org/. More detail about + the Linux NFS server implementation is available via the + exports(5) man page. + + Below you can choose which versions of the NFS protocol are + available to clients mounting the NFS server on this system. + Support for NFS version 2 (RFC 1094) is always available when + CONFIG_NFSD is selected. + + If unsure, say N. + +config NFSD_V2_ACL + bool + depends on NFSD + +config NFSD_V3 + bool "NFS server support for NFS version 3" + depends on NFSD + help + This option enables support in your system's NFS server for + version 3 of the NFS protocol (RFC 1813). + + If unsure, say Y. + +config NFSD_V3_ACL + bool "NFS server support for the NFSv3 ACL protocol extension" + depends on NFSD_V3 + select NFSD_V2_ACL + help + Solaris NFS servers support an auxiliary NFSv3 ACL protocol that + never became an official part of the NFS version 3 protocol. + This protocol extension allows applications on NFS clients to + manipulate POSIX Access Control Lists on files residing on NFS + servers. NFS servers enforce POSIX ACLs on local files whether + this protocol is available or not. + + This option enables support in your system's NFS server for the + NFSv3 ACL protocol extension allowing NFS clients to manipulate + POSIX ACLs on files exported by your system's NFS server. NFS + clients which support the Solaris NFSv3 ACL protocol can then + access and modify ACLs on your NFS server. + + To store ACLs on your NFS server, you also need to enable ACL- + related CONFIG options for your local file systems of choice. + + If unsure, say N. + +config NFSD_V4 + bool "NFS server support for NFS version 4 (EXPERIMENTAL)" + depends on NFSD && PROC_FS && EXPERIMENTAL + select NFSD_V3 + select FS_POSIX_ACL + select RPCSEC_GSS_KRB5 + help + This option enables support in your system's NFS server for + version 4 of the NFS protocol (RFC 3530). + + To export files using NFSv4, you need to install additional user + space programs which can be found in the Linux nfs-utils package, + available from http://linux-nfs.org/. + + If unsure, say N. diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index d53a1838d6e8..bed766e435b5 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -427,10 +427,61 @@ static unsigned int inotify_poll(struct file *file, poll_table *wait) return ret; } +/* + * Get an inotify_kernel_event if one exists and is small + * enough to fit in "count". Return an error pointer if + * not large enough. + * + * Called with the device ev_mutex held. + */ +static struct inotify_kernel_event *get_one_event(struct inotify_device *dev, + size_t count) +{ + size_t event_size = sizeof(struct inotify_event); + struct inotify_kernel_event *kevent; + + if (list_empty(&dev->events)) + return NULL; + + kevent = inotify_dev_get_event(dev); + if (kevent->name) + event_size += kevent->event.len; + + if (event_size > count) + return ERR_PTR(-EINVAL); + + remove_kevent(dev, kevent); + return kevent; +} + +/* + * Copy an event to user space, returning how much we copied. + * + * We already checked that the event size is smaller than the + * buffer we had in "get_one_event()" above. + */ +static ssize_t copy_event_to_user(struct inotify_kernel_event *kevent, + char __user *buf) +{ + size_t event_size = sizeof(struct inotify_event); + + if (copy_to_user(buf, &kevent->event, event_size)) + return -EFAULT; + + if (kevent->name) { + buf += event_size; + + if (copy_to_user(buf, kevent->name, kevent->event.len)) + return -EFAULT; + + event_size += kevent->event.len; + } + return event_size; +} + static ssize_t inotify_read(struct file *file, char __user *buf, size_t count, loff_t *pos) { - size_t event_size = sizeof (struct inotify_event); struct inotify_device *dev; char __user *start; int ret; @@ -440,81 +491,43 @@ static ssize_t inotify_read(struct file *file, char __user *buf, dev = file->private_data; while (1) { + struct inotify_kernel_event *kevent; prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE); mutex_lock(&dev->ev_mutex); - if (!list_empty(&dev->events)) { - ret = 0; - break; - } + kevent = get_one_event(dev, count); mutex_unlock(&dev->ev_mutex); - if (file->f_flags & O_NONBLOCK) { - ret = -EAGAIN; - break; - } - - if (signal_pending(current)) { - ret = -EINTR; - break; + if (kevent) { + ret = PTR_ERR(kevent); + if (IS_ERR(kevent)) + break; + ret = copy_event_to_user(kevent, buf); + free_kevent(kevent); + if (ret < 0) + break; + buf += ret; + count -= ret; + continue; } - schedule(); - } - - finish_wait(&dev->wq, &wait); - if (ret) - return ret; - - while (1) { - struct inotify_kernel_event *kevent; - - ret = buf - start; - if (list_empty(&dev->events)) + ret = -EAGAIN; + if (file->f_flags & O_NONBLOCK) break; - - kevent = inotify_dev_get_event(dev); - if (event_size + kevent->event.len > count) { - if (ret == 0 && count > 0) { - /* - * could not get a single event because we - * didn't have enough buffer space. - */ - ret = -EINVAL; - } + ret = -EINTR; + if (signal_pending(current)) break; - } - remove_kevent(dev, kevent); - /* - * Must perform the copy_to_user outside the mutex in order - * to avoid a lock order reversal with mmap_sem. - */ - mutex_unlock(&dev->ev_mutex); - - if (copy_to_user(buf, &kevent->event, event_size)) { - ret = -EFAULT; + if (start != buf) break; - } - buf += event_size; - count -= event_size; - - if (kevent->name) { - if (copy_to_user(buf, kevent->name, kevent->event.len)){ - ret = -EFAULT; - break; - } - buf += kevent->event.len; - count -= kevent->event.len; - } - - free_kevent(kevent); - mutex_lock(&dev->ev_mutex); + schedule(); } - mutex_unlock(&dev->ev_mutex); + finish_wait(&dev->wq, &wait); + if (start != buf && ret != -EFAULT) + ret = buf - start; return ret; } diff --git a/fs/ntfs/Kconfig b/fs/ntfs/Kconfig new file mode 100644 index 000000000000..f5a868cc9152 --- /dev/null +++ b/fs/ntfs/Kconfig @@ -0,0 +1,78 @@ +config NTFS_FS + tristate "NTFS file system support" + select NLS + help + NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003. + + Saying Y or M here enables read support. There is partial, but + safe, write support available. For write support you must also + say Y to "NTFS write support" below. + + There are also a number of user-space tools available, called + ntfsprogs. These include ntfsundelete and ntfsresize, that work + without NTFS support enabled in the kernel. + + This is a rewrite from scratch of Linux NTFS support and replaced + the old NTFS code starting with Linux 2.5.11. A backport to + the Linux 2.4 kernel series is separately available as a patch + from the project web site. + + For more information see <file:Documentation/filesystems/ntfs.txt> + and <http://www.linux-ntfs.org/>. + + To compile this file system support as a module, choose M here: the + module will be called ntfs. + + If you are not using Windows NT, 2000, XP or 2003 in addition to + Linux on your computer it is safe to say N. + +config NTFS_DEBUG + bool "NTFS debugging support" + depends on NTFS_FS + help + If you are experiencing any problems with the NTFS file system, say + Y here. This will result in additional consistency checks to be + performed by the driver as well as additional debugging messages to + be written to the system log. Note that debugging messages are + disabled by default. To enable them, supply the option debug_msgs=1 + at the kernel command line when booting the kernel or as an option + to insmod when loading the ntfs module. Once the driver is active, + you can enable debugging messages by doing (as root): + echo 1 > /proc/sys/fs/ntfs-debug + Replacing the "1" with "0" would disable debug messages. + + If you leave debugging messages disabled, this results in little + overhead, but enabling debug messages results in very significant + slowdown of the system. + + When reporting bugs, please try to have available a full dump of + debugging messages while the misbehaviour was occurring. + +config NTFS_RW + bool "NTFS write support" + depends on NTFS_FS + help + This enables the partial, but safe, write support in the NTFS driver. + + The only supported operation is overwriting existing files, without + changing the file length. No file or directory creation, deletion or + renaming is possible. Note only non-resident files can be written to + so you may find that some very small files (<500 bytes or so) cannot + be written to. + + While we cannot guarantee that it will not damage any data, we have + so far not received a single report where the driver would have + damaged someones data so we assume it is perfectly safe to use. + + Note: While write support is safe in this version (a rewrite from + scratch of the NTFS support), it should be noted that the old NTFS + write support, included in Linux 2.5.10 and before (since 1997), + is not safe. + + This is currently useful with TopologiLinux. TopologiLinux is run + on top of any DOS/Microsoft Windows system without partitioning your + hard disk. Unlike other Linux distributions TopologiLinux does not + need its own partition. For more information see + <http://topologi-linux.sourceforge.net/> + + It is perfectly safe to say N here. diff --git a/fs/ocfs2/Kconfig b/fs/ocfs2/Kconfig new file mode 100644 index 000000000000..701b7a3a872e --- /dev/null +++ b/fs/ocfs2/Kconfig @@ -0,0 +1,85 @@ +config OCFS2_FS + tristate "OCFS2 file system support" + depends on NET && SYSFS + select CONFIGFS_FS + select JBD2 + select CRC32 + select QUOTA + select QUOTA_TREE + help + OCFS2 is a general purpose extent based shared disk cluster file + system with many similarities to ext3. It supports 64 bit inode + numbers, and has automatically extending metadata groups which may + also make it attractive for non-clustered use. + + You'll want to install the ocfs2-tools package in order to at least + get "mount.ocfs2". + + Project web page: http://oss.oracle.com/projects/ocfs2 + Tools web page: http://oss.oracle.com/projects/ocfs2-tools + OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ + + For more information on OCFS2, see the file + <file:Documentation/filesystems/ocfs2.txt>. + +config OCFS2_FS_O2CB + tristate "O2CB Kernelspace Clustering" + depends on OCFS2_FS + default y + help + OCFS2 includes a simple kernelspace clustering package, the OCFS2 + Cluster Base. It only requires a very small userspace component + to configure it. This comes with the standard ocfs2-tools package. + O2CB is limited to maintaining a cluster for OCFS2 file systems. + It cannot manage any other cluster applications. + + It is always safe to say Y here, as the clustering method is + run-time selectable. + +config OCFS2_FS_USERSPACE_CLUSTER + tristate "OCFS2 Userspace Clustering" + depends on OCFS2_FS && DLM + default y + help + This option will allow OCFS2 to use userspace clustering services + in conjunction with the DLM in fs/dlm. If you are using a + userspace cluster manager, say Y here. + + It is safe to say Y, as the clustering method is run-time + selectable. + +config OCFS2_FS_STATS + bool "OCFS2 statistics" + depends on OCFS2_FS + default y + help + This option allows some fs statistics to be captured. Enabling + this option may increase the memory consumption. + +config OCFS2_DEBUG_MASKLOG + bool "OCFS2 logging support" + depends on OCFS2_FS + default y + help + The ocfs2 filesystem has an extensive logging system. The system + allows selection of events to log via files in /sys/o2cb/logmask/. + This option will enlarge your kernel, but it allows debugging of + ocfs2 filesystem issues. + +config OCFS2_DEBUG_FS + bool "OCFS2 expensive checks" + depends on OCFS2_FS + default n + help + This option will enable expensive consistency checks. Enable + this option for debugging only as it is likely to decrease + performance of the filesystem. + +config OCFS2_FS_POSIX_ACL + bool "OCFS2 POSIX Access Control Lists" + depends on OCFS2_FS + select FS_POSIX_ACL + default n + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. diff --git a/fs/omfs/Kconfig b/fs/omfs/Kconfig new file mode 100644 index 000000000000..b1b9a0aba6fd --- /dev/null +++ b/fs/omfs/Kconfig @@ -0,0 +1,13 @@ +config OMFS_FS + tristate "SonicBlue Optimized MPEG File System support" + depends on BLOCK + select CRC_ITU_T + help + This is the proprietary file system used by the Rio Karma music + player and ReplayTV DVR. Despite the name, this filesystem is not + more efficient than a standard FS for MPEG files, in fact likely + the opposite is true. Say Y if you have either of these devices + and wish to mount its disk. + + To compile this file system support as a module, choose M here: the + module will be called omfs. If unsure, say N. diff --git a/fs/qnx4/Kconfig b/fs/qnx4/Kconfig new file mode 100644 index 000000000000..be8e0e1445b6 --- /dev/null +++ b/fs/qnx4/Kconfig @@ -0,0 +1,25 @@ +config QNX4FS_FS + tristate "QNX4 file system support (read only)" + depends on BLOCK + help + This is the file system used by the real-time operating systems + QNX 4 and QNX 6 (the latter is also called QNX RTP). + Further information is available at <http://www.qnx.com/>. + Say Y if you intend to mount QNX hard disks or floppies. + Unless you say Y to "QNX4FS read-write support" below, you will + only be able to read these file systems. + + To compile this file system support as a module, choose M here: the + module will be called qnx4. + + If you don't know whether you need it, then you don't need it: + answer N. + +config QNX4FS_RW + bool "QNX4FS write support (DANGEROUS)" + depends on QNX4FS_FS && EXPERIMENTAL && BROKEN + help + Say Y if you want to test write support for QNX4 file systems. + + It's currently broken, so for now: + answer N. diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig new file mode 100644 index 000000000000..949b8c6addc8 --- /dev/null +++ b/fs/reiserfs/Kconfig @@ -0,0 +1,85 @@ +config REISERFS_FS + tristate "Reiserfs support" + help + Stores not just filenames but the files themselves in a balanced + tree. Uses journalling. + + Balanced trees are more efficient than traditional file system + architectural foundations. + + In general, ReiserFS is as fast as ext2, but is very efficient with + large directories and small files. Additional patches are needed + for NFS and quotas, please see <http://www.namesys.com/> for links. + + It is more easily extended to have features currently found in + database and keyword search systems than block allocation based file + systems are. The next version will be so extended, and will support + plugins consistent with our motto ``It takes more than a license to + make source code open.'' + + Read <http://www.namesys.com/> to learn more about reiserfs. + + Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. + + If you like it, you can pay us to add new features to it that you + need, buy a support contract, or pay us to port it to another OS. + +config REISERFS_CHECK + bool "Enable reiserfs debug mode" + depends on REISERFS_FS + help + If you set this to Y, then ReiserFS will perform every check it can + possibly imagine of its internal consistency throughout its + operation. It will also go substantially slower. More than once we + have forgotten that this was on, and then gone despondent over the + latest benchmarks.:-) Use of this option allows our team to go all + out in checking for consistency when debugging without fear of its + effect on end users. If you are on the verge of sending in a bug + report, say Y and you might get a useful error message. Almost + everyone should say N. + +config REISERFS_PROC_INFO + bool "Stats in /proc/fs/reiserfs" + depends on REISERFS_FS && PROC_FS + help + Create under /proc/fs/reiserfs a hierarchy of files, displaying + various ReiserFS statistics and internal data at the expense of + making your kernel or module slightly larger (+8 KB). This also + increases the amount of kernel memory required for each mount. + Almost everyone but ReiserFS developers and people fine-tuning + reiserfs or tracing problems should say N. + +config REISERFS_FS_XATTR + bool "ReiserFS extended attributes" + depends on REISERFS_FS + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + <http://acl.bestbits.at/> for details). + + If unsure, say N. + +config REISERFS_FS_POSIX_ACL + bool "ReiserFS POSIX Access Control Lists" + depends on REISERFS_FS_XATTR + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website <http://acl.bestbits.at/>. + + If you don't know what Access Control Lists are, say N + +config REISERFS_FS_SECURITY + bool "ReiserFS Security Labels" + depends on REISERFS_FS_XATTR + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the ReiserFS filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. diff --git a/fs/romfs/Kconfig b/fs/romfs/Kconfig new file mode 100644 index 000000000000..1a17020f9faf --- /dev/null +++ b/fs/romfs/Kconfig @@ -0,0 +1,16 @@ +config ROMFS_FS + tristate "ROM file system support" + depends on BLOCK + ---help--- + This is a very small read-only file system mainly intended for + initial ram disks of installation disks, but it could be used for + other read-only media as well. Read + <file:Documentation/filesystems/romfs.txt> for details. + + To compile this file system support as a module, choose M here: the + module will be called romfs. Note that the file system of your + root partition (the one containing the directory /) cannot be a + module. + + If you don't know whether you need it, then you don't need it: + answer N. diff --git a/fs/smbfs/Kconfig b/fs/smbfs/Kconfig new file mode 100644 index 000000000000..e668127c8b2e --- /dev/null +++ b/fs/smbfs/Kconfig @@ -0,0 +1,55 @@ +config SMB_FS + tristate "SMB file system support (OBSOLETE, please use CIFS)" + depends on INET + select NLS + help + SMB (Server Message Block) is the protocol Windows for Workgroups + (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share + files and printers over local networks. Saying Y here allows you to + mount their file systems (often called "shares" in this context) and + access them just like any other Unix directory. Currently, this + works only if the Windows machines use TCP/IP as the underlying + transport protocol, and not NetBEUI. For details, read + <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + Note: if you just want your box to act as an SMB *server* and make + files and printing services available to Windows clients (which need + to have a TCP/IP stack), you don't need to say Y here; you can use + the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>) + for that. + + General information about how to connect Linux, Windows machines and + Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. + + To compile the SMB support as a module, choose M here: + the module will be called smbfs. Most people say N, however. + +config SMB_NLS_DEFAULT + bool "Use a default NLS" + depends on SMB_FS + help + Enabling this will make smbfs use nls translations by default. You + need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls + settings and you need to give the default nls for the SMB server as + CONFIG_SMB_NLS_REMOTE. + + The nls settings can be changed at mount time, if your smbmount + supports that, using the codepage and iocharset parameters. + + smbmount from samba 2.2.0 or later supports this. + +config SMB_NLS_REMOTE + string "Default Remote NLS Option" + depends on SMB_NLS_DEFAULT + default "cp437" + help + This setting allows you to specify a default value for which + codepage the server uses. If this field is left blank no + translations will be done by default. The local codepage/charset + default to CONFIG_NLS_DEFAULT. + + The nls settings can be changed at mount time, if your smbmount + supports that, using the codepage and iocharset parameters. + + smbmount from samba 2.2.0 or later supports this. diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig new file mode 100644 index 000000000000..25a00d19d686 --- /dev/null +++ b/fs/squashfs/Kconfig @@ -0,0 +1,51 @@ +config SQUASHFS + tristate "SquashFS 4.0 - Squashed file system support" + depends on BLOCK + select ZLIB_INFLATE + help + Saying Y here includes support for SquashFS 4.0 (a Compressed + Read-Only File System). Squashfs is a highly compressed read-only + filesystem for Linux. It uses zlib compression to compress both + files, inodes and directories. Inodes in the system are very small + and all blocks are packed to minimise data overhead. Block sizes + greater than 4K are supported up to a maximum of 1 Mbytes (default + block size 128K). SquashFS 4.0 supports 64 bit filesystems and files + (larger than 4GB), full uid/gid information, hard links and + timestamps. + + Squashfs is intended for general read-only filesystem use, for + archival use (i.e. in cases where a .tar.gz file may be used), and in + embedded systems where low overhead is needed. Further information + and tools are available from http://squashfs.sourceforge.net. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called squashfs. Note that the root file system (the one + containing the directory /) cannot be compiled as a module. + + If unsure, say N. + +config SQUASHFS_EMBEDDED + + bool "Additional option for memory-constrained systems" + depends on SQUASHFS + default n + help + Saying Y here allows you to specify cache size. + + If unsure, say N. + +config SQUASHFS_FRAGMENT_CACHE_SIZE + int "Number of fragments cached" if SQUASHFS_EMBEDDED + depends on SQUASHFS + default "3" + help + By default SquashFS caches the last 3 fragments read from + the filesystem. Increasing this amount may mean SquashFS + has to re-read fragments less often from disk, at the expense + of extra system memory. Decreasing this amount will mean + SquashFS uses less memory at the expense of extra reads from disk. + + Note there must be at least one cached fragment. Anything + much more than three will probably not make much difference. diff --git a/fs/sysfs/Kconfig b/fs/sysfs/Kconfig new file mode 100644 index 000000000000..f4b67588b9d6 --- /dev/null +++ b/fs/sysfs/Kconfig @@ -0,0 +1,23 @@ +config SYSFS + bool "sysfs file system support" if EMBEDDED + default y + help + The sysfs filesystem is a virtual filesystem that the kernel uses to + export internal kernel objects, their attributes, and their + relationships to one another. + + Users can use sysfs to ascertain useful information about the running + kernel, such as the devices the kernel has discovered on each bus and + which driver each is bound to. sysfs can also be used to tune devices + and other kernel subsystems. + + Some system agents rely on the information in sysfs to operate. + /sbin/hotplug uses device and object attributes in sysfs to assist in + delegating policy decisions, like persistently naming devices. + + sysfs is currently used by the block subsystem to mount the root + partition. If sysfs is disabled you must specify the boot device on + the kernel boot command line via its major and minor numbers. For + example, "root=03:01" for /dev/hda1. + + Designers of embedded systems may wish to say N here to conserve space. diff --git a/fs/sysv/Kconfig b/fs/sysv/Kconfig new file mode 100644 index 000000000000..33aeb4b75db1 --- /dev/null +++ b/fs/sysv/Kconfig @@ -0,0 +1,36 @@ +config SYSV_FS + tristate "System V/Xenix/V7/Coherent file system support" + depends on BLOCK + help + SCO, Xenix and Coherent are commercial Unix systems for Intel + machines, and Version 7 was used on the DEC PDP-11. Saying Y + here would allow you to read from their floppies and hard disk + partitions. + + If you have floppies or hard disk partitions like that, it is likely + that they contain binaries from those other Unix systems; in order + to run these binaries, you will want to install linux-abi which is + a set of kernel modules that lets you run SCO, Xenix, Wyse, + UnixWare, Dell Unix and System V programs under Linux. It is + available via FTP (user: ftp) from + <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>). + NOTE: that will work only for binaries from Intel-based systems; + PDP ones will have to wait until somebody ports Linux to -11 ;-) + + If you only intend to mount files from some other Unix over the + network using NFS, you don't need the System V file system support + (but you need NFS file system support obviously). + + Note that this option is generally not needed for floppies, since a + good portable way to transport files and directories between unixes + (and even other operating systems) is given by the tar program ("man + tar" or preferably "info tar"). Note also that this option has + nothing whatsoever to do with the option "System V IPC". Read about + the System V file system in + <file:Documentation/filesystems/sysv-fs.txt>. + Saying Y here will enlarge your kernel by about 27 KB. + + To compile this as a module, choose M here: the module will be called + sysv. + + If you haven't heard about all of this before, it's safe to say N. diff --git a/fs/udf/Kconfig b/fs/udf/Kconfig new file mode 100644 index 000000000000..0e0e99bd6bce --- /dev/null +++ b/fs/udf/Kconfig @@ -0,0 +1,18 @@ +config UDF_FS + tristate "UDF file system support" + select CRC_ITU_T + help + This is the new file system used on some CD-ROMs and DVDs. Say Y if + you intend to mount DVD discs or CDRW's written in packet mode, or + if written to by other UDF utilities, such as DirectCD. + Please read <file:Documentation/filesystems/udf.txt>. + + To compile this file system support as a module, choose M here: the + module will be called udf. + + If unsure, say N. + +config UDF_NLS + bool + default y + depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y) diff --git a/fs/ufs/Kconfig b/fs/ufs/Kconfig new file mode 100644 index 000000000000..e4f10a40768a --- /dev/null +++ b/fs/ufs/Kconfig @@ -0,0 +1,43 @@ +config UFS_FS + tristate "UFS file system support (read only)" + depends on BLOCK + help + BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD, + OpenBSD and NeXTstep) use a file system called UFS. Some System V + Unixes can create and mount hard disk partitions and diskettes using + this file system as well. Saying Y here will allow you to read from + these partitions; if you also want to write to them, say Y to the + experimental "UFS file system write support", below. Please read the + file <file:Documentation/filesystems/ufs.txt> for more information. + + The recently released UFS2 variant (used in FreeBSD 5.x) is + READ-ONLY supported. + + Note that this option is generally not needed for floppies, since a + good portable way to transport files and directories between unixes + (and even other operating systems) is given by the tar program ("man + tar" or preferably "info tar"). + + When accessing NeXTstep files, you may need to convert them from the + NeXT character set to the Latin1 character set; use the program + recode ("info recode") for this purpose. + + To compile the UFS file system support as a module, choose M here: the + module will be called ufs. + + If you haven't heard about all of this before, it's safe to say N. + +config UFS_FS_WRITE + bool "UFS file system write support (DANGEROUS)" + depends on UFS_FS && EXPERIMENTAL + help + Say Y here if you want to try writing to UFS partitions. This is + experimental, so you should back up your UFS partitions beforehand. + +config UFS_DEBUG + bool "UFS debugging" + depends on UFS_FS + help + If you are experiencing any problems with the UFS filesystem, say + Y here. This will result in _many_ additional debugging messages to be + written to the system log. diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig index 3f53dd101f99..29228f5899cd 100644 --- a/fs/xfs/Kconfig +++ b/fs/xfs/Kconfig @@ -1,6 +1,7 @@ config XFS_FS tristate "XFS filesystem support" depends on BLOCK + select EXPORTFS help XFS is a high performance journaling filesystem which originated on the SGI IRIX platform. It is completely multi-threaded, can diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index e5be1e0be802..4bd112313f33 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -50,12 +50,14 @@ #include "xfs_vnodeops.h" #include "xfs_quota.h" #include "xfs_inode_item.h" +#include "xfs_export.h" #include <linux/capability.h> #include <linux/dcache.h> #include <linux/mount.h> #include <linux/namei.h> #include <linux/pagemap.h> +#include <linux/exportfs.h> /* * xfs_find_handle maps from userspace xfs_fsop_handlereq structure to @@ -164,97 +166,69 @@ xfs_find_handle( return 0; } - /* - * Convert userspace handle data into inode. - * - * We use the fact that all the fsop_handlereq ioctl calls have a data - * structure argument whose first component is always a xfs_fsop_handlereq_t, - * so we can pass that sub structure into this handy, shared routine. - * - * If no error, caller must always iput the returned inode. + * No need to do permission checks on the various pathname components + * as the handle operations are privileged. */ STATIC int -xfs_vget_fsop_handlereq( - xfs_mount_t *mp, - struct inode *parinode, /* parent inode pointer */ - xfs_fsop_handlereq_t *hreq, - struct inode **inode) +xfs_handle_acceptable( + void *context, + struct dentry *dentry) +{ + return 1; +} + +/* + * Convert userspace handle data into a dentry. + */ +struct dentry * +xfs_handle_to_dentry( + struct file *parfilp, + void __user *uhandle, + u32 hlen) { - void __user *hanp; - size_t hlen; - xfs_fid_t *xfid; - xfs_handle_t *handlep; xfs_handle_t handle; - xfs_inode_t *ip; - xfs_ino_t ino; - __u32 igen; - int error; + struct xfs_fid64 fid; /* * Only allow handle opens under a directory. */ - if (!S_ISDIR(parinode->i_mode)) - return XFS_ERROR(ENOTDIR); - - hanp = hreq->ihandle; - hlen = hreq->ihandlen; - handlep = &handle; - - if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep)) - return XFS_ERROR(EINVAL); - if (copy_from_user(handlep, hanp, hlen)) - return XFS_ERROR(EFAULT); - if (hlen < sizeof(*handlep)) - memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen); - if (hlen > sizeof(handlep->ha_fsid)) { - if (handlep->ha_fid.fid_len != - (hlen - sizeof(handlep->ha_fsid) - - sizeof(handlep->ha_fid.fid_len)) || - handlep->ha_fid.fid_pad) - return XFS_ERROR(EINVAL); - } - - /* - * Crack the handle, obtain the inode # & generation # - */ - xfid = (struct xfs_fid *)&handlep->ha_fid; - if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) { - ino = xfid->fid_ino; - igen = xfid->fid_gen; - } else { - return XFS_ERROR(EINVAL); - } - - /* - * Get the XFS inode, building a Linux inode to go with it. - */ - error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0); - if (error) - return error; - if (ip == NULL) - return XFS_ERROR(EIO); - if (ip->i_d.di_gen != igen) { - xfs_iput_new(ip, XFS_ILOCK_SHARED); - return XFS_ERROR(ENOENT); - } - - xfs_iunlock(ip, XFS_ILOCK_SHARED); + if (!S_ISDIR(parfilp->f_path.dentry->d_inode->i_mode)) + return ERR_PTR(-ENOTDIR); + + if (hlen != sizeof(xfs_handle_t)) + return ERR_PTR(-EINVAL); + if (copy_from_user(&handle, uhandle, hlen)) + return ERR_PTR(-EFAULT); + if (handle.ha_fid.fid_len != + sizeof(handle.ha_fid) - sizeof(handle.ha_fid.fid_len)) + return ERR_PTR(-EINVAL); + + memset(&fid, 0, sizeof(struct fid)); + fid.ino = handle.ha_fid.fid_ino; + fid.gen = handle.ha_fid.fid_gen; + + return exportfs_decode_fh(parfilp->f_path.mnt, (struct fid *)&fid, 3, + FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG, + xfs_handle_acceptable, NULL); +} - *inode = VFS_I(ip); - return 0; +STATIC struct dentry * +xfs_handlereq_to_dentry( + struct file *parfilp, + xfs_fsop_handlereq_t *hreq) +{ + return xfs_handle_to_dentry(parfilp, hreq->ihandle, hreq->ihandlen); } int xfs_open_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, struct file *parfilp, - struct inode *parinode) + xfs_fsop_handlereq_t *hreq) { const struct cred *cred = current_cred(); int error; - int new_fd; + int fd; int permflag; struct file *filp; struct inode *inode; @@ -263,19 +237,21 @@ xfs_open_by_handle( if (!capable(CAP_SYS_ADMIN)) return -XFS_ERROR(EPERM); - error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + inode = dentry->d_inode; /* Restrict xfs_open_by_handle to directories & regular files. */ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode))) { - iput(inode); - return -XFS_ERROR(EINVAL); + error = -XFS_ERROR(EPERM); + goto out_dput; } #if BITS_PER_LONG != 32 hreq->oflags |= O_LARGEFILE; #endif + /* Put open permission in namei format. */ permflag = hreq->oflags; if ((permflag+1) & O_ACCMODE) @@ -285,50 +261,45 @@ xfs_open_by_handle( if ((!(permflag & O_APPEND) || (permflag & O_TRUNC)) && (permflag & FMODE_WRITE) && IS_APPEND(inode)) { - iput(inode); - return -XFS_ERROR(EPERM); + error = -XFS_ERROR(EPERM); + goto out_dput; } if ((permflag & FMODE_WRITE) && IS_IMMUTABLE(inode)) { - iput(inode); - return -XFS_ERROR(EACCES); + error = -XFS_ERROR(EACCES); + goto out_dput; } /* Can't write directories. */ - if ( S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) { - iput(inode); - return -XFS_ERROR(EISDIR); + if (S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) { + error = -XFS_ERROR(EISDIR); + goto out_dput; } - if ((new_fd = get_unused_fd()) < 0) { - iput(inode); - return new_fd; + fd = get_unused_fd(); + if (fd < 0) { + error = fd; + goto out_dput; } - dentry = d_obtain_alias(inode); - if (IS_ERR(dentry)) { - put_unused_fd(new_fd); - return PTR_ERR(dentry); - } - - /* Ensure umount returns EBUSY on umounts while this file is open. */ - mntget(parfilp->f_path.mnt); - - /* Create file pointer. */ - filp = dentry_open(dentry, parfilp->f_path.mnt, hreq->oflags, cred); + filp = dentry_open(dentry, mntget(parfilp->f_path.mnt), + hreq->oflags, cred); if (IS_ERR(filp)) { - put_unused_fd(new_fd); - return -XFS_ERROR(-PTR_ERR(filp)); + put_unused_fd(fd); + return PTR_ERR(filp); } if (inode->i_mode & S_IFREG) { - /* invisible operation should not change atime */ filp->f_flags |= O_NOATIME; filp->f_mode |= FMODE_NOCMTIME; } - fd_install(new_fd, filp); - return new_fd; + fd_install(fd, filp); + return fd; + + out_dput: + dput(dentry); + return error; } /* @@ -359,11 +330,10 @@ do_readlink( int xfs_readlink_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, - struct inode *parinode) + struct file *parfilp, + xfs_fsop_handlereq_t *hreq) { - struct inode *inode; + struct dentry *dentry; __u32 olen; void *link; int error; @@ -371,26 +341,28 @@ xfs_readlink_by_handle( if (!capable(CAP_SYS_ADMIN)) return -XFS_ERROR(EPERM); - error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); /* Restrict this handle operation to symlinks only. */ - if (!S_ISLNK(inode->i_mode)) { + if (!S_ISLNK(dentry->d_inode->i_mode)) { error = -XFS_ERROR(EINVAL); - goto out_iput; + goto out_dput; } if (copy_from_user(&olen, hreq->ohandlen, sizeof(__u32))) { error = -XFS_ERROR(EFAULT); - goto out_iput; + goto out_dput; } link = kmalloc(MAXPATHLEN+1, GFP_KERNEL); - if (!link) - goto out_iput; + if (!link) { + error = -XFS_ERROR(ENOMEM); + goto out_dput; + } - error = -xfs_readlink(XFS_I(inode), link); + error = -xfs_readlink(XFS_I(dentry->d_inode), link); if (error) goto out_kfree; error = do_readlink(hreq->ohandle, olen, link); @@ -399,32 +371,31 @@ xfs_readlink_by_handle( out_kfree: kfree(link); - out_iput: - iput(inode); + out_dput: + dput(dentry); return error; } STATIC int xfs_fssetdm_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; struct fsdmidata fsd; xfs_fsop_setdm_handlereq_t dmhreq; - struct inode *inode; + struct dentry *dentry; if (!capable(CAP_MKNOD)) return -XFS_ERROR(EPERM); if (copy_from_user(&dmhreq, arg, sizeof(xfs_fsop_setdm_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq(mp, parinode, &dmhreq.hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, &dmhreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) { + if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) { error = -XFS_ERROR(EPERM); goto out; } @@ -434,24 +405,23 @@ xfs_fssetdm_by_handle( goto out; } - error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask, + error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask, fsd.fsd_dmstate); out: - iput(inode); + dput(dentry); return error; } STATIC int xfs_attrlist_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { - int error; + int error = -ENOMEM; attrlist_cursor_kern_t *cursor; xfs_fsop_attrlist_handlereq_t al_hreq; - struct inode *inode; + struct dentry *dentry; char *kbuf; if (!capable(CAP_SYS_ADMIN)) @@ -467,16 +437,16 @@ xfs_attrlist_by_handle( if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) return -XFS_ERROR(EINVAL); - error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode); - if (error) - goto out; + dentry = xfs_handlereq_to_dentry(parfilp, &al_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL); if (!kbuf) - goto out_vn_rele; + goto out_dput; cursor = (attrlist_cursor_kern_t *)&al_hreq.pos; - error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen, + error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen, al_hreq.flags, cursor); if (error) goto out_kfree; @@ -486,10 +456,9 @@ xfs_attrlist_by_handle( out_kfree: kfree(kbuf); - out_vn_rele: - iput(inode); - out: - return -error; + out_dput: + dput(dentry); + return error; } int @@ -564,15 +533,13 @@ xfs_attrmulti_attr_remove( STATIC int xfs_attrmulti_by_handle( - xfs_mount_t *mp, - void __user *arg, struct file *parfilp, - struct inode *parinode) + void __user *arg) { int error; xfs_attr_multiop_t *ops; xfs_fsop_attrmulti_handlereq_t am_hreq; - struct inode *inode; + struct dentry *dentry; unsigned int i, size; char *attr_name; @@ -581,19 +548,19 @@ xfs_attrmulti_by_handle( if (copy_from_user(&am_hreq, arg, sizeof(xfs_fsop_attrmulti_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq(mp, parinode, &am_hreq.hreq, &inode); - if (error) - goto out; + dentry = xfs_handlereq_to_dentry(parfilp, &am_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); error = E2BIG; size = am_hreq.opcount * sizeof(xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) - goto out_vn_rele; + goto out_dput; error = ENOMEM; ops = kmalloc(size, GFP_KERNEL); if (!ops) - goto out_vn_rele; + goto out_dput; error = EFAULT; if (copy_from_user(ops, am_hreq.ops, size)) @@ -615,25 +582,28 @@ xfs_attrmulti_by_handle( switch (ops[i].am_opcode) { case ATTR_OP_GET: - ops[i].am_error = xfs_attrmulti_attr_get(inode, - attr_name, ops[i].am_attrvalue, - &ops[i].am_length, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_get( + dentry->d_inode, attr_name, + ops[i].am_attrvalue, &ops[i].am_length, + ops[i].am_flags); break; case ATTR_OP_SET: ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); if (ops[i].am_error) break; - ops[i].am_error = xfs_attrmulti_attr_set(inode, - attr_name, ops[i].am_attrvalue, - ops[i].am_length, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_set( + dentry->d_inode, attr_name, + ops[i].am_attrvalue, ops[i].am_length, + ops[i].am_flags); mnt_drop_write(parfilp->f_path.mnt); break; case ATTR_OP_REMOVE: ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); if (ops[i].am_error) break; - ops[i].am_error = xfs_attrmulti_attr_remove(inode, - attr_name, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_remove( + dentry->d_inode, attr_name, + ops[i].am_flags); mnt_drop_write(parfilp->f_path.mnt); break; default: @@ -647,9 +617,8 @@ xfs_attrmulti_by_handle( kfree(attr_name); out_kfree_ops: kfree(ops); - out_vn_rele: - iput(inode); - out: + out_dput: + dput(dentry); return -error; } @@ -1440,23 +1409,23 @@ xfs_file_ioctl( if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t))) return -XFS_ERROR(EFAULT); - return xfs_open_by_handle(mp, &hreq, filp, inode); + return xfs_open_by_handle(filp, &hreq); } case XFS_IOC_FSSETDM_BY_HANDLE: - return xfs_fssetdm_by_handle(mp, arg, inode); + return xfs_fssetdm_by_handle(filp, arg); case XFS_IOC_READLINK_BY_HANDLE: { xfs_fsop_handlereq_t hreq; if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t))) return -XFS_ERROR(EFAULT); - return xfs_readlink_by_handle(mp, &hreq, inode); + return xfs_readlink_by_handle(filp, &hreq); } case XFS_IOC_ATTRLIST_BY_HANDLE: - return xfs_attrlist_by_handle(mp, arg, inode); + return xfs_attrlist_by_handle(filp, arg); case XFS_IOC_ATTRMULTI_BY_HANDLE: - return xfs_attrmulti_by_handle(mp, arg, filp, inode); + return xfs_attrmulti_by_handle(filp, arg); case XFS_IOC_SWAPEXT: { struct xfs_swapext sxp; diff --git a/fs/xfs/linux-2.6/xfs_ioctl.h b/fs/xfs/linux-2.6/xfs_ioctl.h index 8c16bf2d7e03..7bd7c6afc1eb 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.h +++ b/fs/xfs/linux-2.6/xfs_ioctl.h @@ -34,16 +34,13 @@ xfs_find_handle( extern int xfs_open_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, struct file *parfilp, - struct inode *parinode); + xfs_fsop_handlereq_t *hreq); extern int xfs_readlink_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, - struct inode *parinode); + struct file *parfilp, + xfs_fsop_handlereq_t *hreq); extern int xfs_attrmulti_attr_get( @@ -67,6 +64,12 @@ xfs_attrmulti_attr_remove( char *name, __uint32_t flags); +extern struct dentry * +xfs_handle_to_dentry( + struct file *parfilp, + void __user *uhandle, + u32 hlen); + extern long xfs_file_ioctl( struct file *filp, diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c index 50903ad3182e..c70c4e3db790 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl32.c +++ b/fs/xfs/linux-2.6/xfs_ioctl32.c @@ -17,6 +17,7 @@ */ #include <linux/compat.h> #include <linux/ioctl.h> +#include <linux/mount.h> #include <asm/uaccess.h> #include "xfs.h" #include "xfs_fs.h" @@ -340,96 +341,24 @@ xfs_compat_handlereq_copyin( return 0; } -/* - * Convert userspace handle data into inode. - * - * We use the fact that all the fsop_handlereq ioctl calls have a data - * structure argument whose first component is always a xfs_fsop_handlereq_t, - * so we can pass that sub structure into this handy, shared routine. - * - * If no error, caller must always iput the returned inode. - */ -STATIC int -xfs_vget_fsop_handlereq_compat( - xfs_mount_t *mp, - struct inode *parinode, /* parent inode pointer */ - compat_xfs_fsop_handlereq_t *hreq, - struct inode **inode) +STATIC struct dentry * +xfs_compat_handlereq_to_dentry( + struct file *parfilp, + compat_xfs_fsop_handlereq_t *hreq) { - void __user *hanp; - size_t hlen; - xfs_fid_t *xfid; - xfs_handle_t *handlep; - xfs_handle_t handle; - xfs_inode_t *ip; - xfs_ino_t ino; - __u32 igen; - int error; - - /* - * Only allow handle opens under a directory. - */ - if (!S_ISDIR(parinode->i_mode)) - return XFS_ERROR(ENOTDIR); - - hanp = compat_ptr(hreq->ihandle); - hlen = hreq->ihandlen; - handlep = &handle; - - if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep)) - return XFS_ERROR(EINVAL); - if (copy_from_user(handlep, hanp, hlen)) - return XFS_ERROR(EFAULT); - if (hlen < sizeof(*handlep)) - memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen); - if (hlen > sizeof(handlep->ha_fsid)) { - if (handlep->ha_fid.fid_len != - (hlen - sizeof(handlep->ha_fsid) - - sizeof(handlep->ha_fid.fid_len)) || - handlep->ha_fid.fid_pad) - return XFS_ERROR(EINVAL); - } - - /* - * Crack the handle, obtain the inode # & generation # - */ - xfid = (struct xfs_fid *)&handlep->ha_fid; - if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) { - ino = xfid->fid_ino; - igen = xfid->fid_gen; - } else { - return XFS_ERROR(EINVAL); - } - - /* - * Get the XFS inode, building a Linux inode to go with it. - */ - error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0); - if (error) - return error; - if (ip == NULL) - return XFS_ERROR(EIO); - if (ip->i_d.di_gen != igen) { - xfs_iput_new(ip, XFS_ILOCK_SHARED); - return XFS_ERROR(ENOENT); - } - - xfs_iunlock(ip, XFS_ILOCK_SHARED); - - *inode = VFS_I(ip); - return 0; + return xfs_handle_to_dentry(parfilp, + compat_ptr(hreq->ihandle), hreq->ihandlen); } STATIC int xfs_compat_attrlist_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; attrlist_cursor_kern_t *cursor; compat_xfs_fsop_attrlist_handlereq_t al_hreq; - struct inode *inode; + struct dentry *dentry; char *kbuf; if (!capable(CAP_SYS_ADMIN)) @@ -446,17 +375,17 @@ xfs_compat_attrlist_by_handle( if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) return -XFS_ERROR(EINVAL); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &al_hreq.hreq, - &inode); - if (error) - goto out; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &al_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + error = -ENOMEM; kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL); if (!kbuf) - goto out_vn_rele; + goto out_dput; cursor = (attrlist_cursor_kern_t *)&al_hreq.pos; - error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen, + error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen, al_hreq.flags, cursor); if (error) goto out_kfree; @@ -466,22 +395,20 @@ xfs_compat_attrlist_by_handle( out_kfree: kfree(kbuf); - out_vn_rele: - iput(inode); - out: - return -error; + out_dput: + dput(dentry); + return error; } STATIC int xfs_compat_attrmulti_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; compat_xfs_attr_multiop_t *ops; compat_xfs_fsop_attrmulti_handlereq_t am_hreq; - struct inode *inode; + struct dentry *dentry; unsigned int i, size; char *attr_name; @@ -491,20 +418,19 @@ xfs_compat_attrmulti_by_handle( sizeof(compat_xfs_fsop_attrmulti_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &am_hreq.hreq, - &inode); - if (error) - goto out; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &am_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); error = E2BIG; size = am_hreq.opcount * sizeof(compat_xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) - goto out_vn_rele; + goto out_dput; error = ENOMEM; ops = kmalloc(size, GFP_KERNEL); if (!ops) - goto out_vn_rele; + goto out_dput; error = EFAULT; if (copy_from_user(ops, compat_ptr(am_hreq.ops), size)) @@ -527,20 +453,29 @@ xfs_compat_attrmulti_by_handle( switch (ops[i].am_opcode) { case ATTR_OP_GET: - ops[i].am_error = xfs_attrmulti_attr_get(inode, - attr_name, + ops[i].am_error = xfs_attrmulti_attr_get( + dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), &ops[i].am_length, ops[i].am_flags); break; case ATTR_OP_SET: - ops[i].am_error = xfs_attrmulti_attr_set(inode, - attr_name, + ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); + if (ops[i].am_error) + break; + ops[i].am_error = xfs_attrmulti_attr_set( + dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), ops[i].am_length, ops[i].am_flags); + mnt_drop_write(parfilp->f_path.mnt); break; case ATTR_OP_REMOVE: - ops[i].am_error = xfs_attrmulti_attr_remove(inode, - attr_name, ops[i].am_flags); + ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); + if (ops[i].am_error) + break; + ops[i].am_error = xfs_attrmulti_attr_remove( + dentry->d_inode, attr_name, + ops[i].am_flags); + mnt_drop_write(parfilp->f_path.mnt); break; default: ops[i].am_error = EINVAL; @@ -553,22 +488,20 @@ xfs_compat_attrmulti_by_handle( kfree(attr_name); out_kfree_ops: kfree(ops); - out_vn_rele: - iput(inode); - out: + out_dput: + dput(dentry); return -error; } STATIC int xfs_compat_fssetdm_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; struct fsdmidata fsd; compat_xfs_fsop_setdm_handlereq_t dmhreq; - struct inode *inode; + struct dentry *dentry; if (!capable(CAP_MKNOD)) return -XFS_ERROR(EPERM); @@ -576,12 +509,11 @@ xfs_compat_fssetdm_by_handle( sizeof(compat_xfs_fsop_setdm_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &dmhreq.hreq, - &inode); - if (error) - return -error; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &dmhreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) { + if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) { error = -XFS_ERROR(EPERM); goto out; } @@ -591,11 +523,11 @@ xfs_compat_fssetdm_by_handle( goto out; } - error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask, + error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask, fsd.fsd_dmstate); out: - iput(inode); + dput(dentry); return error; } @@ -722,21 +654,21 @@ xfs_file_compat_ioctl( if (xfs_compat_handlereq_copyin(&hreq, arg)) return -XFS_ERROR(EFAULT); - return xfs_open_by_handle(mp, &hreq, filp, inode); + return xfs_open_by_handle(filp, &hreq); } case XFS_IOC_READLINK_BY_HANDLE_32: { struct xfs_fsop_handlereq hreq; if (xfs_compat_handlereq_copyin(&hreq, arg)) return -XFS_ERROR(EFAULT); - return xfs_readlink_by_handle(mp, &hreq, inode); + return xfs_readlink_by_handle(filp, &hreq); } case XFS_IOC_ATTRLIST_BY_HANDLE_32: - return xfs_compat_attrlist_by_handle(mp, arg, inode); + return xfs_compat_attrlist_by_handle(filp, arg); case XFS_IOC_ATTRMULTI_BY_HANDLE_32: - return xfs_compat_attrmulti_by_handle(mp, arg, inode); + return xfs_compat_attrmulti_by_handle(filp, arg); case XFS_IOC_FSSETDM_BY_HANDLE_32: - return xfs_compat_fssetdm_by_handle(mp, arg, inode); + return xfs_compat_fssetdm_by_handle(filp, arg); default: return -XFS_ERROR(ENOIOCTLCMD); } diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 95a971080368..c71e226da7f5 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1197,6 +1197,7 @@ xfs_fs_remount( struct xfs_mount *mp = XFS_M(sb); substring_t args[MAX_OPT_ARGS]; char *p; + int error; while ((p = strsep(&options, ",")) != NULL) { int token; @@ -1247,11 +1248,25 @@ xfs_fs_remount( } } - /* rw/ro -> rw */ + /* ro -> rw */ if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) { mp->m_flags &= ~XFS_MOUNT_RDONLY; if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); + + /* + * If this is the first remount to writeable state we + * might have some superblock changes to update. + */ + if (mp->m_update_flags) { + error = xfs_mount_log_sb(mp, mp->m_update_flags); + if (error) { + cmn_err(CE_WARN, + "XFS: failed to write sb changes"); + return error; + } + mp->m_update_flags = 0; + } } /* rw -> ro */ diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index 591ca6602bfb..6543c0b29753 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -73,6 +73,8 @@ int xfs_dqreq_num; int xfs_dqerror_mod = 33; #endif +static struct lock_class_key xfs_dquot_other_class; + /* * Allocate and initialize a dquot. We don't always allocate fresh memory; * we try to reclaim a free dquot if the number of incore dquots are above @@ -139,7 +141,15 @@ xfs_qm_dqinit( ASSERT(dqp->q_trace); xfs_dqtrace_entry(dqp, "DQRECLAIMED_INIT"); #endif - } + } + + /* + * In either case we need to make sure group quotas have a different + * lock class than user quotas, to make sure lockdep knows we can + * locks of one of each at the same time. + */ + if (!(type & XFS_DQ_USER)) + lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class); /* * log item gets initialized later @@ -421,7 +431,7 @@ xfs_qm_dqalloc( /* * Initialize the bmap freelist prior to calling bmapi code. */ - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); xfs_ilock(quotip, XFS_ILOCK_EXCL); /* * Return if this type of quotas is turned off while we didn't @@ -1383,6 +1393,12 @@ xfs_dqunlock_nonotify( mutex_unlock(&(dqp->q_qlock)); } +/* + * Lock two xfs_dquot structures. + * + * To avoid deadlocks we always lock the quota structure with + * the lowerd id first. + */ void xfs_dqlock2( xfs_dquot_t *d1, @@ -1392,18 +1408,16 @@ xfs_dqlock2( ASSERT(d1 != d2); if (be32_to_cpu(d1->q_core.d_id) > be32_to_cpu(d2->q_core.d_id)) { - xfs_dqlock(d2); - xfs_dqlock(d1); + mutex_lock(&d2->q_qlock); + mutex_lock_nested(&d1->q_qlock, XFS_QLOCK_NESTED); } else { - xfs_dqlock(d1); - xfs_dqlock(d2); - } - } else { - if (d1) { - xfs_dqlock(d1); - } else if (d2) { - xfs_dqlock(d2); + mutex_lock(&d1->q_qlock); + mutex_lock_nested(&d2->q_qlock, XFS_QLOCK_NESTED); } + } else if (d1) { + mutex_lock(&d1->q_qlock); + } else if (d2) { + mutex_lock(&d2->q_qlock); } } diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h index 7e455337e2ba..d443e93b4331 100644 --- a/fs/xfs/quota/xfs_dquot.h +++ b/fs/xfs/quota/xfs_dquot.h @@ -97,6 +97,16 @@ typedef struct xfs_dquot { #define dq_hashlist q_lists.dqm_hashlist #define dq_flags q_lists.dqm_flags +/* + * Lock hierachy for q_qlock: + * XFS_QLOCK_NORMAL is the implicit default, + * XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2 + */ +enum { + XFS_QLOCK_NORMAL = 0, + XFS_QLOCK_NESTED, +}; + #define XFS_DQHOLD(dqp) ((dqp)->q_nrefs++) #ifdef DEBUG diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index 6b13960cf318..7a2beb64314f 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -1070,6 +1070,13 @@ xfs_qm_sync( return 0; } +/* + * The hash chains and the mplist use the same xfs_dqhash structure as + * their list head, but we can take the mplist qh_lock and one of the + * hash qh_locks at the same time without any problem as they aren't + * related. + */ +static struct lock_class_key xfs_quota_mplist_class; /* * This initializes all the quota information that's kept in the @@ -1105,6 +1112,8 @@ xfs_qm_init_quotainfo( } xfs_qm_list_init(&qinf->qi_dqlist, "mpdqlist", 0); + lockdep_set_class(&qinf->qi_dqlist.qh_lock, &xfs_quota_mplist_class); + qinf->qi_dqreclaims = 0; /* mutex used to serialize quotaoffs */ diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h index d3b3cf742999..143d63ecb20a 100644 --- a/fs/xfs/xfs_ag.h +++ b/fs/xfs/xfs_ag.h @@ -244,8 +244,8 @@ typedef struct xfs_perag #define XFS_AG_CHECK_DADDR(mp,d,len) \ ((len) == 1 ? \ ASSERT((d) == XFS_SB_DADDR || \ - XFS_DADDR_TO_AGBNO(mp, d) != XFS_SB_DADDR) : \ - ASSERT(XFS_DADDR_TO_AGNO(mp, d) == \ - XFS_DADDR_TO_AGNO(mp, (d) + (len) - 1))) + xfs_daddr_to_agbno(mp, d) != XFS_SB_DADDR) : \ + ASSERT(xfs_daddr_to_agno(mp, d) == \ + xfs_daddr_to_agno(mp, (d) + (len) - 1))) #endif /* __XFS_AG_H__ */ diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c index 733cb75a8c5d..c10c3a292d30 100644 --- a/fs/xfs/xfs_alloc_btree.c +++ b/fs/xfs/xfs_alloc_btree.c @@ -115,7 +115,7 @@ xfs_allocbt_free_block( xfs_agblock_t bno; int error; - bno = XFS_DADDR_TO_AGBNO(cur->bc_mp, XFS_BUF_ADDR(bp)); + bno = xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp)); error = xfs_alloc_put_freelist(cur->bc_tp, agbp, NULL, bno, 1); if (error) return error; diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index f7cdc28aff41..5fde1654b430 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -374,7 +374,7 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name, * It won't fit in the shortform, transform to a leaf block. * GROT: another possible req'mt for a double-split btree op. */ - XFS_BMAP_INIT(args.flist, args.firstblock); + xfs_bmap_init(args.flist, args.firstblock); error = xfs_attr_shortform_to_leaf(&args); if (!error) { error = xfs_bmap_finish(&args.trans, args.flist, @@ -956,7 +956,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * Commit that transaction so that the node_addname() call * can manage its own transactions. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_node(args); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1057,7 +1057,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * If the result is small enough, shrink it all into the inode. */ if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -1135,7 +1135,7 @@ xfs_attr_leaf_removename(xfs_da_args_t *args) * If the result is small enough, shrink it all into the inode. */ if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -1290,7 +1290,7 @@ restart: * have been a b-tree. */ xfs_da_state_free(state); - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_node(args); if (!error) { error = xfs_bmap_finish(&args->trans, @@ -1331,7 +1331,7 @@ restart: * in the index/blkno/rmtblkno/rmtblkcnt fields and * in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_split(state); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1443,7 +1443,7 @@ restart: * Check to see if the tree needs to be collapsed. */ if (retval && (state->path.active > 1)) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_join(state); if (!error) { error = xfs_bmap_finish(&args->trans, @@ -1579,7 +1579,7 @@ xfs_attr_node_removename(xfs_da_args_t *args) * Check to see if the tree needs to be collapsed. */ if (retval && (state->path.active > 1)) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_join(state); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1630,7 +1630,7 @@ xfs_attr_node_removename(xfs_da_args_t *args) == XFS_ATTR_LEAF_MAGIC); if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -2069,7 +2069,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args) /* * Allocate a single extent, up to the size of the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(args->trans, dp, (xfs_fileoff_t)lblkno, blkcnt, @@ -2123,7 +2123,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args) /* * Try to remember where we decided to put the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(NULL, dp, (xfs_fileoff_t)lblkno, args->rmtblkcnt, @@ -2188,7 +2188,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) /* * Try to remember where we decided to put the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(NULL, args->dp, (xfs_fileoff_t)lblkno, args->rmtblkcnt, @@ -2229,7 +2229,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) blkcnt = args->rmtblkcnt; done = 0; while (!done) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt, XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA, 1, args->firstblock, args->flist, diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 138308e70d14..c852cd65aaea 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -595,9 +595,9 @@ xfs_bmap_add_extent( xfs_iext_insert(ifp, 0, 1, new); ASSERT(cur == NULL); ifp->if_lastex = 0; - if (!ISNULLSTARTBLOCK(new->br_startblock)) { + if (!isnullstartblock(new->br_startblock)) { XFS_IFORK_NEXT_SET(ip, whichfork, 1); - logflags = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else logflags = 0; /* DELTA: single new extent */ @@ -613,7 +613,7 @@ xfs_bmap_add_extent( /* * Any kind of new delayed allocation goes here. */ - else if (ISNULLSTARTBLOCK(new->br_startblock)) { + else if (isnullstartblock(new->br_startblock)) { if (cur) ASSERT((cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL) == 0); @@ -644,11 +644,11 @@ xfs_bmap_add_extent( * in a delayed or unwritten allocation with a real one, or * converting real back to unwritten. */ - if (!ISNULLSTARTBLOCK(new->br_startblock) && + if (!isnullstartblock(new->br_startblock) && new->br_startoff + new->br_blockcount > prev.br_startoff) { if (prev.br_state != XFS_EXT_UNWRITTEN && - ISNULLSTARTBLOCK(prev.br_startblock)) { - da_old = STARTBLOCKVAL(prev.br_startblock); + isnullstartblock(prev.br_startblock)) { + da_old = startblockval(prev.br_startblock); if (cur) ASSERT(cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL); @@ -803,7 +803,7 @@ xfs_bmap_add_extent_delay_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock)); } STATE_SET(LEFT_CONTIG, STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) && @@ -820,7 +820,7 @@ xfs_bmap_add_extent_delay_real( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock)); } STATE_SET(RIGHT_CONTIG, STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) && @@ -1019,8 +1019,8 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock)); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + startblockval(PREV.br_startblock)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("LF|LC", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: The boundary between two in-core extents moved. */ @@ -1067,10 +1067,10 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock) - + startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); ep = xfs_iext_get_ext(ifp, idx + 1); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("LF", ip, idx + 1, XFS_DATA_FORK); *dnew = temp; /* DELTA: One in-core extent is split in two. */ @@ -1110,8 +1110,8 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock)); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + startblockval(PREV.br_startblock)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("RF|RC", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: The boundary between two in-core extents moved. */ @@ -1157,10 +1157,10 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock) - + startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); ep = xfs_iext_get_ext(ifp, idx); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("RF", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: One in-core extent is split in two. */ @@ -1213,7 +1213,7 @@ xfs_bmap_add_extent_delay_real( } temp = xfs_bmap_worst_indlen(ip, temp); temp2 = xfs_bmap_worst_indlen(ip, temp2); - diff = (int)(temp + temp2 - STARTBLOCKVAL(PREV.br_startblock) - + diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); if (diff > 0 && xfs_mod_incore_sb(ip->i_mount, XFS_SBS_FDBLOCKS, -((int64_t)diff), rsvd)) { @@ -1241,11 +1241,11 @@ xfs_bmap_add_extent_delay_real( } } ep = xfs_iext_get_ext(ifp, idx); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx, XFS_DATA_FORK); XFS_BMAP_TRACE_PRE_UPDATE("0", ip, idx + 2, XFS_DATA_FORK); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx + 2), - NULLSTARTBLOCK((int)temp2)); + nullstartblock((int)temp2)); XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx + 2, XFS_DATA_FORK); *dnew = temp + temp2; /* DELTA: One in-core extent is split in three. */ @@ -1365,7 +1365,7 @@ xfs_bmap_add_extent_unwritten_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock)); } STATE_SET(LEFT_CONTIG, STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) && @@ -1382,7 +1382,7 @@ xfs_bmap_add_extent_unwritten_real( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock)); } STATE_SET(RIGHT_CONTIG, STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) && @@ -1889,13 +1889,13 @@ xfs_bmap_add_extent_hole_delay( ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK); ep = xfs_iext_get_ext(ifp, idx); state = 0; - ASSERT(ISNULLSTARTBLOCK(new->br_startblock)); + ASSERT(isnullstartblock(new->br_startblock)); /* * Check and set flags if this segment has a left neighbor */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock)); } /* * Check and set flags if the current (right) segment exists. @@ -1905,7 +1905,7 @@ xfs_bmap_add_extent_hole_delay( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) { xfs_bmbt_get_all(ep, &right); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock)); } /* * Set contiguity flags on the left and right neighbors. @@ -1938,12 +1938,12 @@ xfs_bmap_add_extent_hole_delay( XFS_BMAP_TRACE_PRE_UPDATE("LC|RC", ip, idx - 1, XFS_DATA_FORK); xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp); - oldlen = STARTBLOCKVAL(left.br_startblock) + - STARTBLOCKVAL(new->br_startblock) + - STARTBLOCKVAL(right.br_startblock); + oldlen = startblockval(left.br_startblock) + + startblockval(new->br_startblock) + + startblockval(right.br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1), - NULLSTARTBLOCK((int)newlen)); + nullstartblock((int)newlen)); XFS_BMAP_TRACE_POST_UPDATE("LC|RC", ip, idx - 1, XFS_DATA_FORK); XFS_BMAP_TRACE_DELETE("LC|RC", ip, idx, 1, XFS_DATA_FORK); @@ -1964,11 +1964,11 @@ xfs_bmap_add_extent_hole_delay( XFS_BMAP_TRACE_PRE_UPDATE("LC", ip, idx - 1, XFS_DATA_FORK); xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp); - oldlen = STARTBLOCKVAL(left.br_startblock) + - STARTBLOCKVAL(new->br_startblock); + oldlen = startblockval(left.br_startblock) + + startblockval(new->br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1), - NULLSTARTBLOCK((int)newlen)); + nullstartblock((int)newlen)); XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, XFS_DATA_FORK); ip->i_df.if_lastex = idx - 1; @@ -1985,11 +1985,11 @@ xfs_bmap_add_extent_hole_delay( */ XFS_BMAP_TRACE_PRE_UPDATE("RC", ip, idx, XFS_DATA_FORK); temp = new->br_blockcount + right.br_blockcount; - oldlen = STARTBLOCKVAL(new->br_startblock) + - STARTBLOCKVAL(right.br_startblock); + oldlen = startblockval(new->br_startblock) + + startblockval(right.br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_allf(ep, new->br_startoff, - NULLSTARTBLOCK((int)newlen), temp, right.br_state); + nullstartblock((int)newlen), temp, right.br_state); XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, XFS_DATA_FORK); ip->i_df.if_lastex = idx; /* DELTA: One in-core extent grew into a hole. */ @@ -2085,7 +2085,7 @@ xfs_bmap_add_extent_hole_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock)); } /* * Check and set flags if this segment has a current value. @@ -2095,7 +2095,7 @@ xfs_bmap_add_extent_hole_real( idx < ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) { xfs_bmbt_get_all(ep, &right); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock)); } /* * We're inserting a real allocation between "left" and "right". @@ -2143,7 +2143,7 @@ xfs_bmap_add_extent_hole_real( XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) - 1); if (cur == NULL) { - rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else { rval = XFS_ILOG_CORE; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2185,7 +2185,7 @@ xfs_bmap_add_extent_hole_real( XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, whichfork); ifp->if_lastex = idx - 1; if (cur == NULL) { - rval = XFS_ILOG_FEXT(whichfork); + rval = xfs_ilog_fext(whichfork); } else { rval = 0; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2220,7 +2220,7 @@ xfs_bmap_add_extent_hole_real( XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, whichfork); ifp->if_lastex = idx; if (cur == NULL) { - rval = XFS_ILOG_FEXT(whichfork); + rval = xfs_ilog_fext(whichfork); } else { rval = 0; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2254,7 +2254,7 @@ xfs_bmap_add_extent_hole_real( XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) + 1); if (cur == NULL) { - rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else { rval = XFS_ILOG_CORE; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2482,7 +2482,7 @@ xfs_bmap_adjacent( * try to use it's last block as our starting point. */ if (ap->eof && ap->prevp->br_startoff != NULLFILEOFF && - !ISNULLSTARTBLOCK(ap->prevp->br_startblock) && + !isnullstartblock(ap->prevp->br_startblock) && ISVALID(ap->prevp->br_startblock + ap->prevp->br_blockcount, ap->prevp->br_startblock)) { ap->rval = ap->prevp->br_startblock + ap->prevp->br_blockcount; @@ -2511,7 +2511,7 @@ xfs_bmap_adjacent( * start block based on it. */ if (ap->prevp->br_startoff != NULLFILEOFF && - !ISNULLSTARTBLOCK(ap->prevp->br_startblock) && + !isnullstartblock(ap->prevp->br_startblock) && (prevbno = ap->prevp->br_startblock + ap->prevp->br_blockcount) && ISVALID(prevbno, ap->prevp->br_startblock)) { @@ -2552,7 +2552,7 @@ xfs_bmap_adjacent( * If there's a following (right) block, select a requested * start block based on it. */ - if (!ISNULLSTARTBLOCK(ap->gotp->br_startblock)) { + if (!isnullstartblock(ap->gotp->br_startblock)) { /* * Calculate gap to start of next block. */ @@ -3082,7 +3082,7 @@ xfs_bmap_btree_to_extents( ASSERT(ifp->if_broot == NULL); ASSERT((ifp->if_flags & XFS_IFBROOT) == 0); XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_EXTENTS); - *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + *logflagsp = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); return 0; } @@ -3136,8 +3136,8 @@ xfs_bmap_del_extent( del_endoff = del->br_startoff + del->br_blockcount; got_endoff = got.br_startoff + got.br_blockcount; ASSERT(got_endoff >= del_endoff); - delay = ISNULLSTARTBLOCK(got.br_startblock); - ASSERT(ISNULLSTARTBLOCK(del->br_startblock) == delay); + delay = isnullstartblock(got.br_startblock); + ASSERT(isnullstartblock(del->br_startblock) == delay); flags = 0; qfield = 0; error = 0; @@ -3189,7 +3189,7 @@ xfs_bmap_del_extent( } da_old = da_new = 0; } else { - da_old = STARTBLOCKVAL(got.br_startblock); + da_old = startblockval(got.br_startblock); da_new = 0; nblks = 0; do_fx = 0; @@ -3213,7 +3213,7 @@ xfs_bmap_del_extent( XFS_IFORK_NEXTENTS(ip, whichfork) - 1); flags |= XFS_ILOG_CORE; if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_btree_delete(cur, &i))) @@ -3233,7 +3233,7 @@ xfs_bmap_del_extent( if (delay) { temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), da_old); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork); da_new = temp; @@ -3242,7 +3242,7 @@ xfs_bmap_del_extent( xfs_bmbt_set_startblock(ep, del_endblock); XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork); if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_bmbt_update(cur, del_endoff, del_endblock, @@ -3262,7 +3262,7 @@ xfs_bmap_del_extent( if (delay) { temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), da_old); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork); da_new = temp; @@ -3270,7 +3270,7 @@ xfs_bmap_del_extent( } XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork); if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_bmbt_update(cur, got.br_startoff, @@ -3345,22 +3345,22 @@ xfs_bmap_del_extent( } XFS_WANT_CORRUPTED_GOTO(i == 1, done); } else - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) + 1); } else { ASSERT(whichfork == XFS_DATA_FORK); temp = xfs_bmap_worst_indlen(ip, temp); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); temp2 = xfs_bmap_worst_indlen(ip, temp2); - new.br_startblock = NULLSTARTBLOCK((int)temp2); + new.br_startblock = nullstartblock((int)temp2); da_new = temp + temp2; while (da_new > da_old) { if (temp) { temp--; da_new--; xfs_bmbt_set_startblock(ep, - NULLSTARTBLOCK((int)temp)); + nullstartblock((int)temp)); } if (da_new == da_old) break; @@ -3368,7 +3368,7 @@ xfs_bmap_del_extent( temp2--; da_new--; new.br_startblock = - NULLSTARTBLOCK((int)temp2); + nullstartblock((int)temp2); } } } @@ -3545,7 +3545,7 @@ xfs_bmap_extents_to_btree( nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); for (cnt = i = 0; i < nextents; i++) { ep = xfs_iext_get_ext(ifp, i); - if (!ISNULLSTARTBLOCK(xfs_bmbt_get_startblock(ep))) { + if (!isnullstartblock(xfs_bmbt_get_startblock(ep))) { arp->l0 = cpu_to_be64(ep->l0); arp->l1 = cpu_to_be64(ep->l1); arp++; cnt++; @@ -3572,7 +3572,7 @@ xfs_bmap_extents_to_btree( xfs_btree_log_recs(cur, abp, 1, be16_to_cpu(ablock->bb_numrecs)); ASSERT(*curp == NULL); *curp = cur; - *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FBROOT(whichfork); + *logflagsp = XFS_ILOG_CORE | xfs_ilog_fbroot(whichfork); return 0; } @@ -3676,7 +3676,7 @@ xfs_bmap_local_to_extents( ip->i_d.di_nblocks = 1; XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip, XFS_TRANS_DQ_BCOUNT, 1L); - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); } else { ASSERT(XFS_IFORK_NEXTENTS(ip, whichfork) == 0); xfs_bmap_forkoff_reset(ip->i_mount, ip, whichfork); @@ -4082,7 +4082,7 @@ xfs_bmap_add_attrfork( XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t); ip->i_afp->if_flags = XFS_IFEXTENTS; logflags = 0; - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); switch (ip->i_d.di_format) { case XFS_DINODE_FMT_LOCAL: error = xfs_bmap_add_attrfork_local(tp, ip, &firstblock, &flist, @@ -4162,7 +4162,7 @@ xfs_bmap_add_free( ASSERT(bno != NULLFSBLOCK); ASSERT(len > 0); ASSERT(len <= MAXEXTLEN); - ASSERT(!ISNULLSTARTBLOCK(bno)); + ASSERT(!isnullstartblock(bno)); agno = XFS_FSB_TO_AGNO(mp, bno); agbno = XFS_FSB_TO_AGBNO(mp, bno); ASSERT(agno < mp->m_sb.sb_agcount); @@ -4909,7 +4909,7 @@ xfs_bmapi( got.br_startoff = end; inhole = eof || got.br_startoff > bno; wasdelay = wr && !inhole && !(flags & XFS_BMAPI_DELAY) && - ISNULLSTARTBLOCK(got.br_startblock); + isnullstartblock(got.br_startblock); /* * First, deal with the hole before the allocated space * that we found, if any. @@ -5028,7 +5028,7 @@ xfs_bmapi( } ip->i_delayed_blks += alen; - abno = NULLSTARTBLOCK(indlen); + abno = nullstartblock(indlen); } else { /* * If first time, allocate and fill in @@ -5144,8 +5144,8 @@ xfs_bmapi( aoff + alen); #ifdef DEBUG if (flags & XFS_BMAPI_DELAY) { - ASSERT(ISNULLSTARTBLOCK(got.br_startblock)); - ASSERT(STARTBLOCKVAL(got.br_startblock) > 0); + ASSERT(isnullstartblock(got.br_startblock)); + ASSERT(startblockval(got.br_startblock) > 0); } ASSERT(got.br_state == XFS_EXT_NORM || got.br_state == XFS_EXT_UNWRITTEN); @@ -5179,7 +5179,7 @@ xfs_bmapi( ASSERT((bno >= obno) || (n == 0)); ASSERT(bno < end); mval->br_startoff = bno; - if (ISNULLSTARTBLOCK(got.br_startblock)) { + if (isnullstartblock(got.br_startblock)) { ASSERT(!wr || (flags & XFS_BMAPI_DELAY)); mval->br_startblock = DELAYSTARTBLOCK; } else @@ -5201,7 +5201,7 @@ xfs_bmapi( ASSERT(mval->br_blockcount <= len); } else { *mval = got; - if (ISNULLSTARTBLOCK(mval->br_startblock)) { + if (isnullstartblock(mval->br_startblock)) { ASSERT(!wr || (flags & XFS_BMAPI_DELAY)); mval->br_startblock = DELAYSTARTBLOCK; } @@ -5329,12 +5329,12 @@ error0: * Log everything. Do this after conversion, there's no point in * logging the extent records if we've converted to btree format. */ - if ((logflags & XFS_ILOG_FEXT(whichfork)) && + if ((logflags & xfs_ilog_fext(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) - logflags &= ~XFS_ILOG_FEXT(whichfork); - else if ((logflags & XFS_ILOG_FBROOT(whichfork)) && + logflags &= ~xfs_ilog_fext(whichfork); + else if ((logflags & xfs_ilog_fbroot(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE) - logflags &= ~XFS_ILOG_FBROOT(whichfork); + logflags &= ~xfs_ilog_fbroot(whichfork); /* * Log whatever the flags say, even if error. Otherwise we might miss * detecting a case where the data is changed, there's an error, @@ -5411,7 +5411,7 @@ xfs_bmapi_single( *fsb = NULLFSBLOCK; return 0; } - ASSERT(!ISNULLSTARTBLOCK(got.br_startblock)); + ASSERT(!isnullstartblock(got.br_startblock)); ASSERT(bno < got.br_startoff + got.br_blockcount); *fsb = got.br_startblock + (bno - got.br_startoff); ifp->if_lastex = lastx; @@ -5543,7 +5543,7 @@ xfs_bunmapi( */ ASSERT(ep != NULL); del = got; - wasdel = ISNULLSTARTBLOCK(del.br_startblock); + wasdel = isnullstartblock(del.br_startblock); if (got.br_startoff < start) { del.br_startoff = start; del.br_blockcount -= start - got.br_startoff; @@ -5638,7 +5638,7 @@ xfs_bunmapi( xfs_bmbt_get_all(xfs_iext_get_ext(ifp, lastx - 1), &prev); ASSERT(prev.br_state == XFS_EXT_NORM); - ASSERT(!ISNULLSTARTBLOCK(prev.br_startblock)); + ASSERT(!isnullstartblock(prev.br_startblock)); ASSERT(del.br_startblock == prev.br_startblock + prev.br_blockcount); if (prev.br_startoff < start) { @@ -5666,7 +5666,7 @@ xfs_bunmapi( } } if (wasdel) { - ASSERT(STARTBLOCKVAL(del.br_startblock) > 0); + ASSERT(startblockval(del.br_startblock) > 0); /* Update realtime/data freespace, unreserve quota */ if (isrt) { xfs_filblks_t rtexts; @@ -5782,12 +5782,12 @@ error0: * Log everything. Do this after conversion, there's no point in * logging the extent records if we've converted to btree format. */ - if ((logflags & XFS_ILOG_FEXT(whichfork)) && + if ((logflags & xfs_ilog_fext(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) - logflags &= ~XFS_ILOG_FEXT(whichfork); - else if ((logflags & XFS_ILOG_FBROOT(whichfork)) && + logflags &= ~xfs_ilog_fext(whichfork); + else if ((logflags & xfs_ilog_fbroot(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE) - logflags &= ~XFS_ILOG_FBROOT(whichfork); + logflags &= ~xfs_ilog_fbroot(whichfork); /* * Log inode even in the error case, if the transaction * is dirty we'll need to shut down the filesystem. @@ -5838,7 +5838,7 @@ xfs_getbmapx_fix_eof_hole( if (startblock == DELAYSTARTBLOCK) out->bmv_block = -2; else - out->bmv_block = XFS_FSB_TO_DB(ip, startblock); + out->bmv_block = xfs_fsb_to_db(ip, startblock); fileblock = XFS_BB_TO_FSB(ip->i_mount, out->bmv_offset); ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK); if (xfs_iext_bno_to_ext(ifp, fileblock, &lastx) && @@ -5979,7 +5979,7 @@ xfs_getbmap( if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1) nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1; - bmapi_flags = XFS_BMAPI_AFLAG(whichfork) | + bmapi_flags = xfs_bmapi_aflag(whichfork) | ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE); /* @@ -6098,7 +6098,7 @@ xfs_bmap_isaeof( */ *aeof = (off >= s.br_startoff && off < s.br_startoff + s.br_blockcount && - ISNULLSTARTBLOCK(s.br_startblock)) || + isnullstartblock(s.br_startblock)) || off >= s.br_startoff + s.br_blockcount; return 0; } diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h index 284571c05ed0..be2979d88d32 100644 --- a/fs/xfs/xfs_bmap.h +++ b/fs/xfs/xfs_bmap.h @@ -95,7 +95,6 @@ typedef struct xfs_bmap_free /* need write cache flushing and no */ /* additional allocation alignments */ -#define XFS_BMAPI_AFLAG(w) xfs_bmapi_aflag(w) static inline int xfs_bmapi_aflag(int w) { return (w == XFS_ATTR_FORK ? XFS_BMAPI_ATTRFORK : 0); @@ -107,7 +106,6 @@ static inline int xfs_bmapi_aflag(int w) #define DELAYSTARTBLOCK ((xfs_fsblock_t)-1LL) #define HOLESTARTBLOCK ((xfs_fsblock_t)-2LL) -#define XFS_BMAP_INIT(flp,fbp) xfs_bmap_init(flp,fbp) static inline void xfs_bmap_init(xfs_bmap_free_t *flp, xfs_fsblock_t *fbp) { ((flp)->xbf_first = NULL, (flp)->xbf_count = 0, \ diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index ba6b08c2fb02..0760d352586f 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -121,7 +121,7 @@ __xfs_bmbt_get_all( b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) | (((xfs_dfsbno_t)l1) >> 21); - ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b)); + ASSERT((b >> 32) == 0 || isnulldstartblock(b)); s->br_startblock = (xfs_fsblock_t)b; } #else /* !DEBUG */ @@ -172,7 +172,7 @@ xfs_bmbt_get_startblock( b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) | (((xfs_dfsbno_t)r->l1) >> 21); - ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b)); + ASSERT((b >> 32) == 0 || isnulldstartblock(b)); return (xfs_fsblock_t)b; #else /* !DEBUG */ return (xfs_fsblock_t)(((xfs_dfsbno_t)r->l1) >> 21); @@ -261,7 +261,7 @@ xfs_bmbt_set_allf( ((xfs_bmbt_rec_base_t)blockcount & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(startblock)) { + if (isnullstartblock(startblock)) { r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) | ((xfs_bmbt_rec_base_t)startoff << 9) | (xfs_bmbt_rec_base_t)xfs_mask64lo(9); @@ -321,7 +321,7 @@ xfs_bmbt_disk_set_allf( ((xfs_bmbt_rec_base_t)blockcount & (xfs_bmbt_rec_base_t)xfs_mask64lo(21))); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(startblock)) { + if (isnullstartblock(startblock)) { r->l0 = cpu_to_be64( ((xfs_bmbt_rec_base_t)extent_flag << 63) | ((xfs_bmbt_rec_base_t)startoff << 9) | @@ -382,7 +382,7 @@ xfs_bmbt_set_startblock( r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) | (xfs_bmbt_rec_base_t)(v << 21); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(v)) { + if (isnullstartblock(v)) { r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9); r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) | ((xfs_bmbt_rec_base_t)v << 21) | diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h index a4555abb6622..0e8df007615e 100644 --- a/fs/xfs/xfs_bmap_btree.h +++ b/fs/xfs/xfs_bmap_btree.h @@ -76,26 +76,22 @@ typedef struct xfs_bmbt_rec_host { #define DSTARTBLOCKMASK \ (((((xfs_dfsbno_t)1) << DSTARTBLOCKMASKBITS) - 1) << STARTBLOCKVALBITS) -#define ISNULLSTARTBLOCK(x) isnullstartblock(x) static inline int isnullstartblock(xfs_fsblock_t x) { return ((x) & STARTBLOCKMASK) == STARTBLOCKMASK; } -#define ISNULLDSTARTBLOCK(x) isnulldstartblock(x) static inline int isnulldstartblock(xfs_dfsbno_t x) { return ((x) & DSTARTBLOCKMASK) == DSTARTBLOCKMASK; } -#define NULLSTARTBLOCK(k) nullstartblock(k) static inline xfs_fsblock_t nullstartblock(int k) { ASSERT(k < (1 << STARTBLOCKVALBITS)); return STARTBLOCKMASK | (k); } -#define STARTBLOCKVAL(x) startblockval(x) static inline xfs_filblks_t startblockval(xfs_fsblock_t x) { return (xfs_filblks_t)((x) & ~STARTBLOCKMASK); diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c index 2c3ef20f8842..e73c332eb23f 100644 --- a/fs/xfs/xfs_btree.c +++ b/fs/xfs/xfs_btree.c @@ -843,7 +843,7 @@ xfs_btree_ptr_is_null( union xfs_btree_ptr *ptr) { if (cur->bc_flags & XFS_BTREE_LONG_PTRS) - return be64_to_cpu(ptr->l) == NULLFSBLOCK; + return be64_to_cpu(ptr->l) == NULLDFSBNO; else return be32_to_cpu(ptr->s) == NULLAGBLOCK; } @@ -854,7 +854,7 @@ xfs_btree_set_ptr_null( union xfs_btree_ptr *ptr) { if (cur->bc_flags & XFS_BTREE_LONG_PTRS) - ptr->l = cpu_to_be64(NULLFSBLOCK); + ptr->l = cpu_to_be64(NULLDFSBNO); else ptr->s = cpu_to_be32(NULLAGBLOCK); } @@ -918,8 +918,8 @@ xfs_btree_init_block( new->bb_numrecs = cpu_to_be16(numrecs); if (cur->bc_flags & XFS_BTREE_LONG_PTRS) { - new->bb_u.l.bb_leftsib = cpu_to_be64(NULLFSBLOCK); - new->bb_u.l.bb_rightsib = cpu_to_be64(NULLFSBLOCK); + new->bb_u.l.bb_leftsib = cpu_to_be64(NULLDFSBNO); + new->bb_u.l.bb_rightsib = cpu_to_be64(NULLDFSBNO); } else { new->bb_u.s.bb_leftsib = cpu_to_be32(NULLAGBLOCK); new->bb_u.s.bb_rightsib = cpu_to_be32(NULLAGBLOCK); @@ -960,7 +960,7 @@ xfs_btree_buf_to_ptr( ptr->l = cpu_to_be64(XFS_DADDR_TO_FSB(cur->bc_mp, XFS_BUF_ADDR(bp))); else { - ptr->s = cpu_to_be32(XFS_DADDR_TO_AGBNO(cur->bc_mp, + ptr->s = cpu_to_be32(xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp))); } } @@ -971,7 +971,7 @@ xfs_btree_ptr_to_daddr( union xfs_btree_ptr *ptr) { if (cur->bc_flags & XFS_BTREE_LONG_PTRS) { - ASSERT(be64_to_cpu(ptr->l) != NULLFSBLOCK); + ASSERT(be64_to_cpu(ptr->l) != NULLDFSBNO); return XFS_FSB_TO_DADDR(cur->bc_mp, be64_to_cpu(ptr->l)); } else { @@ -2454,7 +2454,7 @@ xfs_btree_new_iroot( xfs_btree_log_ptrs(cur, cbp, 1, be16_to_cpu(cblock->bb_numrecs)); *logflags |= - XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork); + XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork); *stat = 1; XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT); return 0; @@ -3048,7 +3048,7 @@ xfs_btree_kill_iroot( cur->bc_bufs[level - 1] = NULL; be16_add_cpu(&block->bb_level, -1); xfs_trans_log_inode(cur->bc_tp, ip, - XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork)); + XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork)); cur->bc_nlevels--; out0: XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT); diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index a11a8390bf6c..c45f74ff1a5b 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1597,7 +1597,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) nmap = 1; ASSERT(args->firstblock != NULL); if ((error = xfs_bmapi(tp, dp, bno, count, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA| + xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA| XFS_BMAPI_CONTIG, args->firstblock, args->total, &map, &nmap, args->flist, NULL))) { @@ -1618,7 +1618,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) nmap = MIN(XFS_BMAP_MAX_NMAP, count); c = (int)(bno + count - b); if ((error = xfs_bmapi(tp, dp, b, c, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE| + xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE| XFS_BMAPI_METADATA, args->firstblock, args->total, &mapp[mapi], &nmap, args->flist, @@ -1882,7 +1882,7 @@ xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno, * the last block to the place we want to kill. */ if ((error = xfs_bunmapi(tp, dp, dead_blkno, count, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_METADATA, + xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA, 0, args->firstblock, args->flist, NULL, &done)) == ENOSPC) { if (w != XFS_DATA_FORK) @@ -1987,7 +1987,7 @@ xfs_da_do_buf( if ((error = xfs_bmapi(trans, dp, (xfs_fileoff_t)bno, nfsb, XFS_BMAPI_METADATA | - XFS_BMAPI_AFLAG(whichfork), + xfs_bmapi_aflag(whichfork), NULL, 0, mapp, &nmap, NULL, NULL))) goto exit0; } diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index e6ebbaeb4dc6..ab016e5ae7be 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -357,7 +357,7 @@ xfs_ialloc_ag_alloc( int ioffset = i << args.mp->m_sb.sb_inodelog; uint isize = sizeof(struct xfs_dinode); - free = XFS_MAKE_IPTR(args.mp, fbuf, i); + free = xfs_make_iptr(args.mp, fbuf, i); free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC); free->di_version = version; free->di_gen = cpu_to_be32(gen); @@ -937,7 +937,7 @@ nextag: } } } - offset = XFS_IALLOC_FIND_FREE(&rec.ir_free); + offset = xfs_ialloc_find_free(&rec.ir_free); ASSERT(offset >= 0); ASSERT(offset < XFS_INODES_PER_CHUNK); ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) % @@ -1279,7 +1279,7 @@ xfs_imap( offset = XFS_INO_TO_OFFSET(mp, ino); ASSERT(offset < mp->m_sb.sb_inopblock); - cluster_agbno = XFS_DADDR_TO_AGBNO(mp, imap->im_blkno); + cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno); offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock; imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster); diff --git a/fs/xfs/xfs_ialloc.h b/fs/xfs/xfs_ialloc.h index 50f558a4e0a8..aeee8278f92c 100644 --- a/fs/xfs/xfs_ialloc.h +++ b/fs/xfs/xfs_ialloc.h @@ -39,7 +39,6 @@ struct xfs_trans; /* * Make an inode pointer out of the buffer/offset. */ -#define XFS_MAKE_IPTR(mp,b,o) xfs_make_iptr(mp,b,o) static inline struct xfs_dinode * xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o) { @@ -50,7 +49,6 @@ xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o) /* * Find a free (set) bit in the inode bitmask. */ -#define XFS_IALLOC_FIND_FREE(fp) xfs_ialloc_find_free(fp) static inline int xfs_ialloc_find_free(xfs_inofree_t *fp) { return xfs_lowbit64(*fp); diff --git a/fs/xfs/xfs_ialloc_btree.h b/fs/xfs/xfs_ialloc_btree.h index 37e5dd01a577..5580e255ff06 100644 --- a/fs/xfs/xfs_ialloc_btree.h +++ b/fs/xfs/xfs_ialloc_btree.h @@ -36,7 +36,6 @@ typedef __uint64_t xfs_inofree_t; #define XFS_INODES_PER_CHUNK_LOG (XFS_NBBYLOG + 3) #define XFS_INOBT_ALL_FREE ((xfs_inofree_t)-1) -#define XFS_INOBT_MASKN(i,n) xfs_inobt_maskn(i,n) static inline xfs_inofree_t xfs_inobt_maskn(int i, int n) { return (((n) >= XFS_INODES_PER_CHUNK ? \ diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 5a5e035e5d38..e7ae08d1df48 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -424,6 +424,19 @@ xfs_iformat( case XFS_DINODE_FMT_LOCAL: atp = (xfs_attr_shortform_t *)XFS_DFORK_APTR(dip); size = be16_to_cpu(atp->hdr.totsize); + + if (unlikely(size < sizeof(struct xfs_attr_sf_hdr))) { + xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount, + "corrupt inode %Lu " + "(bad attr fork size %Ld).", + (unsigned long long) ip->i_ino, + (long long) size); + XFS_CORRUPTION_ERROR("xfs_iformat(8)", + XFS_ERRLEVEL_LOW, + ip->i_mount, dip); + return XFS_ERROR(EFSCORRUPTED); + } + error = xfs_iformat_local(ip, dip, XFS_ATTR_FORK, size); break; case XFS_DINODE_FMT_EXTENTS: @@ -1601,10 +1614,10 @@ xfs_itruncate_finish( * in this file with garbage in them once recovery * runs. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_bunmapi(ntp, ip, first_unmap_block, unmap_len, - XFS_BMAPI_AFLAG(fork) | + xfs_bmapi_aflag(fork) | (sync ? 0 : XFS_BMAPI_ASYNC), XFS_ITRUNC_MAX_EXTENTS, &first_block, &free_list, @@ -2557,7 +2570,7 @@ xfs_iextents_copy( for (i = 0; i < nrecs; i++) { xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i); start_block = xfs_bmbt_get_startblock(ep); - if (ISNULLSTARTBLOCK(start_block)) { + if (isnullstartblock(start_block)) { /* * It's a delayed allocation extent, so skip it. */ diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h index 1ff04cc323ad..9957d0602d54 100644 --- a/fs/xfs/xfs_inode_item.h +++ b/fs/xfs/xfs_inode_item.h @@ -111,20 +111,16 @@ typedef struct xfs_inode_log_format_64 { #define XFS_ILI_IOLOCKED_ANY (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED) - -#define XFS_ILOG_FBROOT(w) xfs_ilog_fbroot(w) static inline int xfs_ilog_fbroot(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT); } -#define XFS_ILOG_FEXT(w) xfs_ilog_fext(w) static inline int xfs_ilog_fext(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT); } -#define XFS_ILOG_FDATA(w) xfs_ilog_fdata(w) static inline int xfs_ilog_fdata(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA); diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 911062cf73a6..08ce72316bfe 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -155,7 +155,7 @@ xfs_imap_to_bmap( iomapp->iomap_bn = IOMAP_DADDR_NULL; iomapp->iomap_flags |= IOMAP_DELAY; } else { - iomapp->iomap_bn = XFS_FSB_TO_DB(ip, start_block); + iomapp->iomap_bn = xfs_fsb_to_db(ip, start_block); if (ISUNWRITTEN(imap)) iomapp->iomap_flags |= IOMAP_UNWRITTEN; } @@ -261,7 +261,7 @@ xfs_iomap( xfs_iunlock(ip, lockmode); lockmode = 0; - if (nimaps && !ISNULLSTARTBLOCK(imap.br_startblock)) { + if (nimaps && !isnullstartblock(imap.br_startblock)) { xfs_iomap_map_trace(XFS_IOMAP_WRITE_MAP, ip, offset, count, iomapp, &imap, flags); break; @@ -491,7 +491,7 @@ xfs_iomap_write_direct( /* * Issue the xfs_bmapi() call to allocate the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); nimaps = 1; error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag, &firstfsb, 0, &imap, &nimaps, &free_list, NULL); @@ -751,7 +751,7 @@ xfs_iomap_write_allocate( xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); xfs_trans_ihold(tp, ip); - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); /* * it is possible that the extents have changed since @@ -911,7 +911,7 @@ xfs_iomap_write_unwritten( /* * Modify the unwritten extent state of the buffer. */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); nimaps = 1; error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb, diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index e19d0a8d5618..cf98a805ec90 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -453,7 +453,7 @@ xfs_bulkstat( (chunkidx = agino - gino + 1) < XFS_INODES_PER_CHUNK && /* there are some left allocated */ - XFS_INOBT_MASKN(chunkidx, + xfs_inobt_maskn(chunkidx, XFS_INODES_PER_CHUNK - chunkidx) & ~gfree) { /* * Grab the chunk record. Mark all the @@ -464,7 +464,7 @@ xfs_bulkstat( if (XFS_INOBT_MASK(i) & ~gfree) gcnt++; } - gfree |= XFS_INOBT_MASKN(0, chunkidx); + gfree |= xfs_inobt_maskn(0, chunkidx); irbp->ir_startino = gino; irbp->ir_freecount = gcnt; irbp->ir_free = gfree; @@ -535,7 +535,7 @@ xfs_bulkstat( chunkidx < XFS_INODES_PER_CHUNK; chunkidx += nicluster, agbno += nbcluster) { - if (XFS_INOBT_MASKN(chunkidx, + if (xfs_inobt_maskn(chunkidx, nicluster) & ~gfree) xfs_btree_reada_bufs(mp, agno, agbno, nbcluster); diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 3c97c6463a4e..35300250e86d 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -45,7 +45,6 @@ #include "xfs_fsops.h" #include "xfs_utils.h" -STATIC int xfs_mount_log_sb(xfs_mount_t *, __int64_t); STATIC int xfs_uuid_mount(xfs_mount_t *); STATIC void xfs_unmountfs_wait(xfs_mount_t *); @@ -682,7 +681,7 @@ xfs_initialize_perag_data(xfs_mount_t *mp, xfs_agnumber_t agcount) * Update alignment values based on mount options and sb values */ STATIC int -xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags) +xfs_update_alignment(xfs_mount_t *mp) { xfs_sb_t *sbp = &(mp->m_sb); @@ -736,11 +735,11 @@ xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags) if (xfs_sb_version_hasdalign(sbp)) { if (sbp->sb_unit != mp->m_dalign) { sbp->sb_unit = mp->m_dalign; - *update_flags |= XFS_SB_UNIT; + mp->m_update_flags |= XFS_SB_UNIT; } if (sbp->sb_width != mp->m_swidth) { sbp->sb_width = mp->m_swidth; - *update_flags |= XFS_SB_WIDTH; + mp->m_update_flags |= XFS_SB_WIDTH; } } } else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN && @@ -905,7 +904,6 @@ xfs_mountfs( xfs_sb_t *sbp = &(mp->m_sb); xfs_inode_t *rip; __uint64_t resblks; - __int64_t update_flags = 0LL; uint quotamount, quotaflags; int uuid_mounted = 0; int error = 0; @@ -933,7 +931,7 @@ xfs_mountfs( "XFS: correcting sb_features alignment problem"); sbp->sb_features2 |= sbp->sb_bad_features2; sbp->sb_bad_features2 = sbp->sb_features2; - update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; + mp->m_update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; /* * Re-check for ATTR2 in case it was found in bad_features2 @@ -947,11 +945,11 @@ xfs_mountfs( if (xfs_sb_version_hasattr2(&mp->m_sb) && (mp->m_flags & XFS_MOUNT_NOATTR2)) { xfs_sb_version_removeattr2(&mp->m_sb); - update_flags |= XFS_SB_FEATURES2; + mp->m_update_flags |= XFS_SB_FEATURES2; /* update sb_versionnum for the clearing of the morebits */ if (!sbp->sb_features2) - update_flags |= XFS_SB_VERSIONNUM; + mp->m_update_flags |= XFS_SB_VERSIONNUM; } /* @@ -960,7 +958,7 @@ xfs_mountfs( * allocator alignment is within an ag, therefore ag has * to be aligned at stripe boundary. */ - error = xfs_update_alignment(mp, &update_flags); + error = xfs_update_alignment(mp); if (error) goto error1; @@ -1137,10 +1135,12 @@ xfs_mountfs( } /* - * If fs is not mounted readonly, then update the superblock changes. + * If this is a read-only mount defer the superblock updates until + * the next remount into writeable mode. Otherwise we would never + * perform the update e.g. for the root filesystem. */ - if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) { - error = xfs_mount_log_sb(mp, update_flags); + if (mp->m_update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) { + error = xfs_mount_log_sb(mp, mp->m_update_flags); if (error) { cmn_err(CE_WARN, "XFS: failed to write sb changes"); goto error4; @@ -1820,7 +1820,7 @@ xfs_uuid_mount( * be altered by the mount options, as well as any potential sb_features2 * fixup. Only the first superblock is updated. */ -STATIC int +int xfs_mount_log_sb( xfs_mount_t *mp, __int64_t fields) diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index c1e028467327..f5e9937f9bdb 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -44,9 +44,9 @@ typedef struct xfs_trans_reservations { #ifndef __KERNEL__ -#define XFS_DADDR_TO_AGNO(mp,d) \ +#define xfs_daddr_to_agno(mp,d) \ ((xfs_agnumber_t)(XFS_BB_TO_FSBT(mp, d) / (mp)->m_sb.sb_agblocks)) -#define XFS_DADDR_TO_AGBNO(mp,d) \ +#define xfs_daddr_to_agbno(mp,d) \ ((xfs_agblock_t)(XFS_BB_TO_FSBT(mp, d) % (mp)->m_sb.sb_agblocks)) #else /* __KERNEL__ */ @@ -327,6 +327,8 @@ typedef struct xfs_mount { spinlock_t m_sync_lock; /* work item list lock */ int m_sync_seq; /* sync thread generation no. */ wait_queue_head_t m_wait_single_sync_task; + __int64_t m_update_flags; /* sb flags we need to update + on the next remount,rw */ } xfs_mount_t; /* @@ -439,7 +441,6 @@ void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, */ #define XFS_MFSI_QUIET 0x40 /* Be silent if mount errors found */ -#define XFS_DADDR_TO_AGNO(mp,d) xfs_daddr_to_agno(mp,d) static inline xfs_agnumber_t xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d) { @@ -448,7 +449,6 @@ xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d) return (xfs_agnumber_t) ld; } -#define XFS_DADDR_TO_AGBNO(mp,d) xfs_daddr_to_agbno(mp,d) static inline xfs_agblock_t xfs_daddr_to_agbno(struct xfs_mount *mp, xfs_daddr_t d) { @@ -514,6 +514,7 @@ extern int xfs_mod_incore_sb_unlocked(xfs_mount_t *, xfs_sb_field_t, int64_t, int); extern int xfs_mod_incore_sb_batch(xfs_mount_t *, xfs_mod_sb_t *, uint, int); +extern int xfs_mount_log_sb(xfs_mount_t *, __int64_t); extern struct xfs_buf *xfs_getsb(xfs_mount_t *, int); extern int xfs_readsb(xfs_mount_t *, int); extern void xfs_freesb(xfs_mount_t *); diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c index 86471bb40fd4..58f85e9cd11d 100644 --- a/fs/xfs/xfs_rename.c +++ b/fs/xfs/xfs_rename.c @@ -147,7 +147,7 @@ xfs_rename( xfs_sort_for_rename(src_dp, target_dp, src_ip, target_ip, inodes, &num_inodes); - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); tp = xfs_trans_alloc(mp, XFS_TRANS_RENAME); cancel_flags = XFS_TRANS_RELEASE_LOG_RES; spaceres = XFS_RENAME_SPACE_RES(mp, target_name->len); diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index edf12c7b834c..c5bb86f3ec05 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -120,7 +120,7 @@ xfs_growfs_rt_alloc( if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL, &ip))) goto error_cancel; - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); /* * Allocate blocks to the bitmap file. */ diff --git a/fs/xfs/xfs_rw.h b/fs/xfs/xfs_rw.h index f87db5344ce6..f76c003ec55d 100644 --- a/fs/xfs/xfs_rw.h +++ b/fs/xfs/xfs_rw.h @@ -28,7 +28,6 @@ struct xfs_mount; * file is a real time file or not, because the bmap code * does. */ -#define XFS_FSB_TO_DB(ip,fsb) xfs_fsb_to_db(ip,fsb) static inline xfs_daddr_t xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb) { diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index 1ed71916e4c9..1b017c657494 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -505,7 +505,7 @@ static inline void xfs_sb_version_removeattr2(xfs_sb_t *sbp) #define XFS_HDR_BLOCK(mp,d) ((xfs_agblock_t)XFS_BB_TO_FSBT(mp,d)) #define XFS_DADDR_TO_FSB(mp,d) XFS_AGB_TO_FSB(mp, \ - XFS_DADDR_TO_AGNO(mp,d), XFS_DADDR_TO_AGBNO(mp,d)) + xfs_daddr_to_agno(mp,d), xfs_daddr_to_agbno(mp,d)) #define XFS_FSB_TO_DADDR(mp,fsbno) XFS_AGB_TO_DADDR(mp, \ XFS_FSB_TO_AGNO(mp,fsbno), XFS_FSB_TO_AGBNO(mp,fsbno)) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index f07bf8768c3a..0e55c5d7db5f 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -862,7 +862,7 @@ xfs_inactive_symlink_rmt( * Find the block(s) so we can inval and unmap them. */ done = 0; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); nmaps = ARRAY_SIZE(mval); if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size), XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps, @@ -1288,7 +1288,7 @@ xfs_inactive( /* * Free the inode. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_ifree(tp, ip, &free_list); if (error) { /* @@ -1461,7 +1461,7 @@ xfs_create( xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT); unlock_dp_on_error = B_TRUE; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); ASSERT(ip == NULL); @@ -1879,7 +1879,7 @@ xfs_remove( } } - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_removename(tp, dp, name, ip->i_ino, &first_block, &free_list, resblks); if (error) { @@ -2059,7 +2059,7 @@ xfs_link( if (error) goto error_return; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino, &first_block, &free_list, resblks); @@ -2231,7 +2231,7 @@ xfs_mkdir( xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL); unlock_dp_on_error = B_FALSE; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_createname(tp, dp, dir_name, cdp->i_ino, &first_block, &free_list, resblks ? @@ -2438,7 +2438,7 @@ xfs_symlink( * Initialize the bmap freelist prior to calling either * bmapi or the directory create code. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); /* * Allocate an inode for the symlink. @@ -2860,7 +2860,7 @@ retry: /* * Issue the xfs_bmapi() call to allocate the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); error = xfs_bmapi(tp, ip, startoffset_fsb, allocatesize_fsb, bmapi_flag, &firstfsb, 0, imapp, &nimaps, @@ -2980,7 +2980,7 @@ xfs_zero_remaining_bytes( XFS_BUF_UNDONE(bp); XFS_BUF_UNWRITE(bp); XFS_BUF_READ(bp); - XFS_BUF_SET_ADDR(bp, XFS_FSB_TO_DB(ip, imap.br_startblock)); + XFS_BUF_SET_ADDR(bp, xfs_fsb_to_db(ip, imap.br_startblock)); xfsbdstrat(mp, bp); error = xfs_iowait(bp); if (error) { @@ -3186,7 +3186,7 @@ xfs_free_file_space( /* * issue the bunmapi() call to free the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); error = xfs_bunmapi(tp, ip, startoffset_fsb, endoffset_fsb - startoffset_fsb, 0, 2, &firstfsb, &free_list, NULL, &done); |