diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/base/core.c | 248 |
1 files changed, 129 insertions, 119 deletions
diff --git a/drivers/base/core.c b/drivers/base/core.c index 0a8a5ab344c1..2712a1a1e959 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1866,47 +1866,6 @@ static void fw_devlink_unblock_consumers(struct device *dev) device_links_write_unlock(); } -/** - * fw_devlink_relax_cycle - Convert cyclic links to SYNC_STATE_ONLY links - * @con: Device to check dependencies for. - * @sup: Device to check against. - * - * Check if @sup depends on @con or any device dependent on it (its child or - * its consumer etc). When such a cyclic dependency is found, convert all - * device links created solely by fw_devlink into SYNC_STATE_ONLY device links. - * This is the equivalent of doing fw_devlink=permissive just between the - * devices in the cycle. We need to do this because, at this point, fw_devlink - * can't tell which of these dependencies is not a real dependency. - * - * Return 1 if a cycle is found. Otherwise, return 0. - */ -static int fw_devlink_relax_cycle(struct device *con, void *sup) -{ - struct device_link *link; - int ret; - - if (con == sup) - return 1; - - ret = device_for_each_child(con, sup, fw_devlink_relax_cycle); - if (ret) - return ret; - - list_for_each_entry(link, &con->links.consumers, s_node) { - if (!(link->flags & DL_FLAG_CYCLE) && - device_link_flag_is_sync_state_only(link->flags)) - continue; - - if (!fw_devlink_relax_cycle(link->consumer, sup)) - continue; - - ret = 1; - - fw_devlink_relax_link(link); - link->flags |= DL_FLAG_CYCLE; - } - return ret; -} static bool fwnode_init_without_drv(struct fwnode_handle *fwnode) { @@ -1938,6 +1897,111 @@ static bool fwnode_ancestor_init_without_drv(struct fwnode_handle *fwnode) } /** + * __fw_devlink_relax_cycles - Relax and mark dependency cycles. + * @con: Potential consumer device. + * @sup_handle: Potential supplier's fwnode. + * + * Needs to be called with fwnode_lock and device link lock held. + * + * Check if @sup_handle or any of its ancestors or suppliers direct/indirectly + * depend on @con. This function can detect multiple cyles between @sup_handle + * and @con. When such dependency cycles are found, convert all device links + * created solely by fw_devlink into SYNC_STATE_ONLY device links. Also, mark + * all fwnode links in the cycle with FWLINK_FLAG_CYCLE so that when they are + * converted into a device link in the future, they are created as + * SYNC_STATE_ONLY device links. This is the equivalent of doing + * fw_devlink=permissive just between the devices in the cycle. We need to do + * this because, at this point, fw_devlink can't tell which of these + * dependencies is not a real dependency. + * + * Return true if one or more cycles were found. Otherwise, return false. + */ +static bool __fw_devlink_relax_cycles(struct device *con, + struct fwnode_handle *sup_handle) +{ + struct device *sup_dev = NULL, *par_dev = NULL; + struct fwnode_link *link; + struct device_link *dev_link; + bool ret = false; + + if (!sup_handle) + return false; + + /* + * We aren't trying to find all cycles. Just a cycle between con and + * sup_handle. + */ + if (sup_handle->flags & FWNODE_FLAG_VISITED) + return false; + + sup_handle->flags |= FWNODE_FLAG_VISITED; + + sup_dev = get_dev_from_fwnode(sup_handle); + + /* Termination condition. */ + if (sup_dev == con) { + ret = true; + goto out; + } + + /* + * If sup_dev is bound to a driver and @con hasn't started binding to a + * driver, sup_dev can't be a consumer of @con. So, no need to check + * further. + */ + if (sup_dev && sup_dev->links.status == DL_DEV_DRIVER_BOUND && + con->links.status == DL_DEV_NO_DRIVER) { + ret = false; + goto out; + } + + list_for_each_entry(link, &sup_handle->suppliers, c_hook) { + if (__fw_devlink_relax_cycles(con, link->supplier)) { + __fwnode_link_cycle(link); + ret = true; + } + } + + /* + * Give priority to device parent over fwnode parent to account for any + * quirks in how fwnodes are converted to devices. + */ + if (sup_dev) + par_dev = get_device(sup_dev->parent); + else + par_dev = fwnode_get_next_parent_dev(sup_handle); + + if (par_dev && __fw_devlink_relax_cycles(con, par_dev->fwnode)) + ret = true; + + if (!sup_dev) + goto out; + + list_for_each_entry(dev_link, &sup_dev->links.suppliers, c_node) { + /* + * Ignore a SYNC_STATE_ONLY flag only if it wasn't marked as + * such due to a cycle. + */ + if (device_link_flag_is_sync_state_only(dev_link->flags) && + !(dev_link->flags & DL_FLAG_CYCLE)) + continue; + + if (__fw_devlink_relax_cycles(con, + dev_link->supplier->fwnode)) { + fw_devlink_relax_link(dev_link); + dev_link->flags |= DL_FLAG_CYCLE; + ret = true; + } + } + +out: + sup_handle->flags &= ~FWNODE_FLAG_VISITED; + put_device(sup_dev); + put_device(par_dev); + return ret; +} + +/** * fw_devlink_create_devlink - Create a device link from a consumer to fwnode * @con: consumer device for the device link * @sup_handle: fwnode handle of supplier @@ -1989,6 +2053,21 @@ static int fw_devlink_create_devlink(struct device *con, fwnode_is_ancestor_of(sup_handle, con->fwnode)) return -EINVAL; + /* + * SYNC_STATE_ONLY device links don't block probing and supports cycles. + * So cycle detection isn't necessary and shouldn't be done. + */ + if (!(flags & DL_FLAG_SYNC_STATE_ONLY)) { + device_links_write_lock(); + if (__fw_devlink_relax_cycles(con, sup_handle)) { + __fwnode_link_cycle(link); + flags = fw_devlink_get_flags(link->flags); + dev_info(con, "Fixed dependency cycle(s) with %pfwf\n", + sup_handle); + } + device_links_write_unlock(); + } + if (sup_handle->flags & FWNODE_FLAG_NOT_DEVICE) sup_dev = fwnode_get_next_parent_dev(sup_handle); else @@ -2002,23 +2081,16 @@ static int fw_devlink_create_devlink(struct device *con, */ if (sup_dev->links.status == DL_DEV_NO_DRIVER && sup_handle->flags & FWNODE_FLAG_INITIALIZED) { + dev_dbg(con, + "Not linking %pfwf - dev might never probe\n", + sup_handle); ret = -EINVAL; goto out; } - /* - * If this fails, it is due to cycles in device links. Just - * give up on this link and treat it as invalid. - */ - if (!device_link_add(con, sup_dev, flags) && - !(flags & DL_FLAG_SYNC_STATE_ONLY)) { - dev_info(con, "Fixing up cyclic dependency with %s\n", - dev_name(sup_dev)); - device_links_write_lock(); - fw_devlink_relax_cycle(con, sup_dev); - device_links_write_unlock(); - device_link_add(con, sup_dev, - FW_DEVLINK_FLAGS_PERMISSIVE); + if (!device_link_add(con, sup_dev, flags)) { + dev_err(con, "Failed to create device link with %s\n", + dev_name(sup_dev)); ret = -EINVAL; } @@ -2031,49 +2103,12 @@ static int fw_devlink_create_devlink(struct device *con, */ if (fwnode_init_without_drv(sup_handle) || fwnode_ancestor_init_without_drv(sup_handle)) { - dev_dbg(con, "Not linking %pfwP - Might never probe\n", + dev_dbg(con, "Not linking %pfwf - might never become dev\n", sup_handle); return -EINVAL; } - /* - * DL_FLAG_SYNC_STATE_ONLY doesn't block probing and supports - * cycles. So cycle detection isn't necessary and shouldn't be - * done. - */ - if (flags & DL_FLAG_SYNC_STATE_ONLY) - return -EAGAIN; - - /* - * If we can't find the supplier device from its fwnode, it might be - * due to a cyclic dependency between fwnodes. Some of these cycles can - * be broken by applying logic. Check for these types of cycles and - * break them so that devices in the cycle probe properly. - * - * If the supplier's parent is dependent on the consumer, then the - * consumer and supplier have a cyclic dependency. Since fw_devlink - * can't tell which of the inferred dependencies are incorrect, don't - * enforce probe ordering between any of the devices in this cyclic - * dependency. Do this by relaxing all the fw_devlink device links in - * this cycle and by treating the fwnode link between the consumer and - * the supplier as an invalid dependency. - */ - sup_dev = fwnode_get_next_parent_dev(sup_handle); - if (sup_dev && device_is_dependent(con, sup_dev)) { - dev_info(con, "Fixing up cyclic dependency with %pfwP (%s)\n", - sup_handle, dev_name(sup_dev)); - device_links_write_lock(); - fw_devlink_relax_cycle(con, sup_dev); - device_links_write_unlock(); - ret = -EINVAL; - } else { - /* - * Can't check for cycles or no cycles. So let's try - * again later. - */ - ret = -EAGAIN; - } - + ret = -EAGAIN; out: put_device(sup_dev); return ret; @@ -2156,10 +2191,7 @@ static void __fw_devlink_link_to_consumers(struct device *dev) * * The function creates normal (non-SYNC_STATE_ONLY) device links between @dev * and the real suppliers of @dev. Once these device links are created, the - * fwnode links are deleted. When such device links are successfully created, - * this function is called recursively on those supplier devices. This is - * needed to detect and break some invalid cycles in fwnode links. See - * fw_devlink_create_devlink() for more details. + * fwnode links are deleted. * * In addition, it also looks at all the suppliers of the entire fwnode tree * because some of the child devices of @dev that have not been added yet @@ -2180,7 +2212,6 @@ static void __fw_devlink_link_to_suppliers(struct device *dev, list_for_each_entry_safe(link, tmp, &fwnode->suppliers, c_hook) { int ret; - struct device *sup_dev; struct fwnode_handle *sup = link->supplier; ret = fw_devlink_create_devlink(dev, sup, link); @@ -2188,27 +2219,6 @@ static void __fw_devlink_link_to_suppliers(struct device *dev, continue; __fwnode_link_del(link); - - /* If no device link was created, nothing more to do. */ - if (ret) - continue; - - /* - * If a device link was successfully created to a supplier, we - * now need to try and link the supplier to all its suppliers. - * - * This is needed to detect and delete false dependencies in - * fwnode links that haven't been converted to a device link - * yet. See comments in fw_devlink_create_devlink() for more - * details on the false dependency. - * - * Without deleting these false dependencies, some devices will - * never probe because they'll keep waiting for their false - * dependency fwnode links to be converted to device links. - */ - sup_dev = get_dev_from_fwnode(sup); - __fw_devlink_link_to_suppliers(sup_dev, sup_dev->fwnode); - put_device(sup_dev); } /* |