diff options
Diffstat (limited to 'drivers')
65 files changed, 2024 insertions, 1279 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 7556913aba45..47768ff87343 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -384,6 +384,15 @@ config ACPI_CUSTOM_METHOD load additional kernel modules after boot, this feature may be used to override that restriction). +config ACPI_BGRT + tristate "Boottime Graphics Resource Table support" + default n + help + This driver adds support for exposing the ACPI Boottime Graphics + Resource Table, which allows the operating system to obtain + data from the firmware boot splash. It will appear under + /sys/firmware/acpi/bgrt/ . + source "drivers/acpi/apei/Kconfig" endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 1567028d2038..47199e2a9130 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_ACPI_SBS) += sbs.o obj-$(CONFIG_ACPI_HED) += hed.o obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o +obj-$(CONFIG_ACPI_BGRT) += bgrt.o # processor has its own "processor." module_param namespace processor-y := processor_driver.o processor_throttling.o diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 0ca208b6dcf0..793b8cc8e256 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -68,12 +68,14 @@ acpi-y += \ acpi-y += \ hwacpi.o \ + hwesleep.o \ hwgpe.o \ hwpci.o \ hwregs.o \ hwsleep.o \ hwvalid.o \ - hwxface.o + hwxface.o \ + hwxfsleep.o acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h index a44bd424f9f4..8a7d51bfb3b3 100644 --- a/drivers/acpi/acpica/accommon.h +++ b/drivers/acpi/acpica/accommon.h @@ -51,7 +51,6 @@ * * Note: The order of these include files is important. */ -#include "acconfig.h" /* Global configuration constants */ #include "acmacros.h" /* C macros */ #include "aclocal.h" /* Internal data types */ #include "acobject.h" /* ACPI internal object */ diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h deleted file mode 100644 index 1f30af613e87..000000000000 --- a/drivers/acpi/acpica/acconfig.h +++ /dev/null @@ -1,231 +0,0 @@ -/****************************************************************************** - * - * Name: acconfig.h - Global configuration constants - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2012, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef _ACCONFIG_H -#define _ACCONFIG_H - -/****************************************************************************** - * - * Configuration options - * - *****************************************************************************/ - -/* - * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the - * ACPI subsystem. This includes the DEBUG_PRINT output - * statements. When disabled, all DEBUG_PRINT - * statements are compiled out. - * - * ACPI_APPLICATION - Use this switch if the subsystem is going to be run - * at the application level. - * - */ - -/* - * OS name, used for the _OS object. The _OS object is essentially obsolete, - * but there is a large base of ASL/AML code in existing machines that check - * for the string below. The use of this string usually guarantees that - * the ASL will execute down the most tested code path. Also, there is some - * code that will not execute the _OSI method unless _OS matches the string - * below. Therefore, change this string at your own risk. - */ -#define ACPI_OS_NAME "Microsoft Windows NT" - -/* Maximum objects in the various object caches */ - -#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */ -#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */ -#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */ - -/* - * Should the subsystem abort the loading of an ACPI table if the - * table checksum is incorrect? - */ -#define ACPI_CHECKSUM_ABORT FALSE - -/****************************************************************************** - * - * Subsystem Constants - * - *****************************************************************************/ - -/* Version of ACPI supported */ - -#define ACPI_CA_SUPPORT_LEVEL 3 - -/* Maximum count for a semaphore object */ - -#define ACPI_MAX_SEMAPHORE_COUNT 256 - -/* Maximum object reference count (detects object deletion issues) */ - -#define ACPI_MAX_REFERENCE_COUNT 0x1000 - -/* Default page size for use in mapping memory for operation regions */ - -#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ - -/* owner_id tracking. 8 entries allows for 255 owner_ids */ - -#define ACPI_NUM_OWNERID_MASKS 8 - -/* Size of the root table array is increased by this increment */ - -#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4 - -/* Maximum number of While() loop iterations before forced abort */ - -#define ACPI_MAX_LOOP_ITERATIONS 0xFFFF - -/* Maximum sleep allowed via Sleep() operator */ - -#define ACPI_MAX_SLEEP 2000 /* Two seconds */ - -/* Address Range lists are per-space_id (Memory and I/O only) */ - -#define ACPI_ADDRESS_RANGE_MAX 2 - -/****************************************************************************** - * - * ACPI Specification constants (Do not change unless the specification changes) - * - *****************************************************************************/ - -/* Number of distinct GPE register blocks and register width */ - -#define ACPI_MAX_GPE_BLOCKS 2 -#define ACPI_GPE_REGISTER_WIDTH 8 - -/* Method info (in WALK_STATE), containing local variables and argumetns */ - -#define ACPI_METHOD_NUM_LOCALS 8 -#define ACPI_METHOD_MAX_LOCAL 7 - -#define ACPI_METHOD_NUM_ARGS 7 -#define ACPI_METHOD_MAX_ARG 6 - -/* Length of _HID, _UID, _CID, and UUID values */ - -#define ACPI_DEVICE_ID_LENGTH 0x09 -#define ACPI_MAX_CID_LENGTH 48 -#define ACPI_UUID_LENGTH 16 - -/* - * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG - */ -#define ACPI_OBJ_NUM_OPERANDS 8 -#define ACPI_OBJ_MAX_OPERAND 7 - -/* Number of elements in the Result Stack frame, can be an arbitrary value */ - -#define ACPI_RESULTS_FRAME_OBJ_NUM 8 - -/* - * Maximal number of elements the Result Stack can contain, - * it may be an arbitray value not exceeding the types of - * result_size and result_count (now u8). - */ -#define ACPI_RESULTS_OBJ_NUM_MAX 255 - -/* Names within the namespace are 4 bytes long */ - -#define ACPI_NAME_SIZE 4 -#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ -#define ACPI_PATH_SEPARATOR '.' - -/* Sizes for ACPI table headers */ - -#define ACPI_OEM_ID_SIZE 6 -#define ACPI_OEM_TABLE_ID_SIZE 8 - -/* Constants used in searching for the RSDP in low memory */ - -#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */ -#define ACPI_EBDA_PTR_LENGTH 2 -#define ACPI_EBDA_WINDOW_SIZE 1024 -#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */ -#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000 -#define ACPI_RSDP_SCAN_STEP 16 - -/* Operation regions */ - -#define ACPI_USER_REGION_BEGIN 0x80 - -/* Maximum space_ids for Operation Regions */ - -#define ACPI_MAX_ADDRESS_SPACE 255 - -/* Array sizes. Used for range checking also */ - -#define ACPI_MAX_MATCH_OPCODE 5 - -/* RSDP checksums */ - -#define ACPI_RSDP_CHECKSUM_LENGTH 20 -#define ACPI_RSDP_XCHECKSUM_LENGTH 36 - -/* SMBus, GSBus and IPMI bidirectional buffer size */ - -#define ACPI_SMBUS_BUFFER_SIZE 34 -#define ACPI_GSBUS_BUFFER_SIZE 34 -#define ACPI_IPMI_BUFFER_SIZE 66 - -/* _sx_d and _sx_w control methods */ - -#define ACPI_NUM_sx_d_METHODS 4 -#define ACPI_NUM_sx_w_METHODS 5 - -/****************************************************************************** - * - * ACPI AML Debugger - * - *****************************************************************************/ - -#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */ - -#define ACPI_DEBUGGER_COMMAND_PROMPT '-' -#define ACPI_DEBUGGER_EXECUTE_PROMPT '%' - -#endif /* _ACCONFIG_H */ diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h index deaa81979561..5e8abb07724f 100644 --- a/drivers/acpi/acpica/acdebug.h +++ b/drivers/acpi/acpica/acdebug.h @@ -111,7 +111,7 @@ acpi_status acpi_db_find_name_in_namespace(char *name_arg); void acpi_db_set_scope(char *name); -acpi_status acpi_db_sleep(char *object_arg); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_db_sleep(char *object_arg)) void acpi_db_find_references(char *object_arg); @@ -119,11 +119,13 @@ void acpi_db_display_locks(void); void acpi_db_display_resources(char *object_arg); -void acpi_db_display_gpes(void); +ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void)) void acpi_db_check_integrity(void); -void acpi_db_generate_gpe(char *gpe_arg, char *block_arg); +ACPI_HW_DEPENDENT_RETURN_VOID(void + acpi_db_generate_gpe(char *gpe_arg, + char *block_arg)) void acpi_db_check_predefined_names(void); diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index c53caa521a30..d700f63e4701 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -69,11 +69,10 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node, */ acpi_status acpi_ev_init_global_lock_handler(void); -acpi_status acpi_ev_acquire_global_lock(u16 timeout); - -acpi_status acpi_ev_release_global_lock(void); - -acpi_status acpi_ev_remove_global_lock_handler(void); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status + acpi_ev_acquire_global_lock(u16 timeout)) + ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_ev_release_global_lock(void)) + acpi_status acpi_ev_remove_global_lock_handler(void); /* * evgpe - Low-level GPE support @@ -114,7 +113,9 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block, void *context); -acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status + acpi_ev_delete_gpe_block(struct acpi_gpe_block_info + *gpe_block)) u32 acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, @@ -126,9 +127,10 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, */ acpi_status acpi_ev_gpe_initialize(void); -void acpi_ev_update_gpes(acpi_owner_id table_owner_id); +ACPI_HW_DEPENDENT_RETURN_VOID(void + acpi_ev_update_gpes(acpi_owner_id table_owner_id)) -acpi_status + acpi_status acpi_ev_match_gpe_method(acpi_handle obj_handle, u32 level, void *context, void **return_value); @@ -237,6 +239,5 @@ acpi_status acpi_ev_remove_sci_handler(void); u32 acpi_ev_initialize_sCI(u32 program_sCI); -void acpi_ev_terminate(void); - +ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_ev_terminate(void)) #endif /* __ACEVENTS_H__ */ diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 2853f7673f3b..4f7d3f57d05c 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -147,7 +147,7 @@ u8 acpi_gbl_system_awake_and_running; */ u8 acpi_gbl_reduced_hardware; -#endif +#endif /* DEFINE_ACPI_GLOBALS */ /* Do not disassemble buffers to resource descriptors */ @@ -184,8 +184,12 @@ ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer; * found in the RSDT/XSDT. */ ACPI_EXTERN struct acpi_table_list acpi_gbl_root_table_list; + +#if (!ACPI_REDUCED_HARDWARE) ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS; +#endif /* !ACPI_REDUCED_HARDWARE */ + /* These addresses are calculated from the FADT Event Block addresses */ ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_status; @@ -397,10 +401,15 @@ ACPI_EXTERN struct acpi_fixed_event_handler ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head; ACPI_EXTERN struct acpi_gpe_block_info *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS]; + +#if (!ACPI_REDUCED_HARDWARE) + ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized; ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler; ACPI_EXTERN void *acpi_gbl_global_event_handler_context; +#endif /* !ACPI_REDUCED_HARDWARE */ + /***************************************************************************** * * Debugger globals diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 677793e938f5..5ccb99ae3a6f 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -81,6 +81,26 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value); acpi_status acpi_hw_clear_acpi_status(void); /* + * hwsleep - sleep/wake support (Legacy sleep registers) + */ +acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags); + +/* + * hwesleep - sleep/wake support (Extended FADT-V5 sleep registers) + */ +void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument); + +acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags); + +/* * hwvalid - Port I/O with validation */ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width); @@ -128,16 +148,4 @@ acpi_status acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id, acpi_handle root_pci_device, acpi_handle pci_region); -#ifdef ACPI_FUTURE_USAGE -/* - * hwtimer - ACPI Timer prototypes - */ -acpi_status acpi_get_timer_resolution(u32 * resolution); - -acpi_status acpi_get_timer(u32 * ticks); - -acpi_status -acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed); -#endif /* ACPI_FUTURE_USAGE */ - #endif /* __ACHWARE_H__ */ diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 3f24068837d5..e3922ca20e7f 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -370,6 +370,7 @@ struct acpi_predefined_data { /* Defines for Flags field above */ #define ACPI_OBJECT_REPAIRED 1 +#define ACPI_OBJECT_WRAPPED 2 /* * Bitmapped return value types diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index ef338a96f5b2..f119f473f71a 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -516,6 +516,12 @@ #endif /* ACPI_DEBUG_OUTPUT */ +#if (!ACPI_REDUCED_HARDWARE) +#define ACPI_HW_OPTIONAL_FUNCTION(addr) addr +#else +#define ACPI_HW_OPTIONAL_FUNCTION(addr) NULL +#endif + /* * Some code only gets executed when the debugger is built in. * Note that this is entirely independent of whether the diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h index 2c9e0f049523..9b19d4b86424 100644 --- a/drivers/acpi/acpica/acnamesp.h +++ b/drivers/acpi/acpica/acnamesp.h @@ -283,8 +283,9 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, union acpi_operand_object **return_object_ptr); acpi_status -acpi_ns_repair_package_list(struct acpi_predefined_data *data, - union acpi_operand_object **obj_desc_ptr); +acpi_ns_wrap_with_package(struct acpi_predefined_data *data, + union acpi_operand_object *original_object, + union acpi_operand_object **obj_desc_ptr); acpi_status acpi_ns_repair_null_element(struct acpi_predefined_data *data, diff --git a/drivers/acpi/acpica/actables.h b/drivers/acpi/acpica/actables.h index d5bec304c823..6712965ba8ae 100644 --- a/drivers/acpi/acpica/actables.h +++ b/drivers/acpi/acpica/actables.h @@ -67,6 +67,11 @@ acpi_status acpi_tb_resize_root_table_list(void); acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc); +struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header + *table_header, + struct acpi_table_desc + *table_desc); + acpi_status acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index); diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index 6729ebe2f1e6..07e4dc44f81c 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -47,7 +47,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evevent") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_ev_fixed_event_initialize(void); @@ -291,3 +291,5 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event) return ((acpi_gbl_fixed_event_handlers[event]. handler) (acpi_gbl_fixed_event_handlers[event].context)); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c index 5e5683cb1f0d..cfeab38795d8 100644 --- a/drivers/acpi/acpica/evglock.c +++ b/drivers/acpi/acpica/evglock.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evglock") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static u32 acpi_ev_global_lock_handler(void *context); @@ -339,3 +339,5 @@ acpi_status acpi_ev_release_global_lock(void) acpi_os_release_mutex(acpi_gbl_global_lock_mutex->mutex.os_mutex); return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 9e88cb6fb25e..8ba0e5f17091 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpe") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context); @@ -766,3 +766,5 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, return_UINT32(ACPI_INTERRUPT_HANDLED); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index be75339cd5dd..23a3ca86b2eb 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeblk") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block, @@ -504,3 +504,5 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index adf7494da9db..da0add858f81 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeinit") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* * Note: History of _PRW support in ACPICA * @@ -440,3 +440,5 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, name, gpe_number)); return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c index 25073932aa10..3c43796b8361 100644 --- a/drivers/acpi/acpica/evgpeutil.c +++ b/drivers/acpi/acpica/evgpeutil.c @@ -48,6 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeutil") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * * FUNCTION: acpi_ev_walk_gpe_list @@ -374,3 +375,5 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 84966f416463..51ef9f5e002d 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -108,27 +108,30 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, ACPI_FUNCTION_NAME(ev_queue_notify_request); /* - * For value 3 (Ejection Request), some device method may need to be run. - * For value 2 (Device Wake) if _PRW exists, the _PS0 method may need - * to be run. + * For value 0x03 (Ejection Request), may need to run a device method. + * For value 0x02 (Device Wake), if _PRW exists, may need to run + * the _PS0 method. * For value 0x80 (Status Change) on the power button or sleep button, - * initiate soft-off or sleep operation? + * initiate soft-off or sleep operation. + * + * For all cases, simply dispatch the notify to the handler. */ ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Dispatching Notify on [%4.4s] Node %p Value 0x%2.2X (%s)\n", - acpi_ut_get_node_name(node), node, notify_value, - acpi_ut_get_notify_name(notify_value))); + "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n", + acpi_ut_get_node_name(node), + acpi_ut_get_type_name(node->type), notify_value, + acpi_ut_get_notify_name(notify_value), node)); /* Get the notify object attached to the NS Node */ obj_desc = acpi_ns_get_attached_object(node); if (obj_desc) { - /* We have the notify object, Get the right handler */ + /* We have the notify object, Get the correct handler */ switch (node->type) { - /* Notify allowed only on these types */ + /* Notify is allowed only on these types */ case ACPI_TYPE_DEVICE: case ACPI_TYPE_THERMAL: @@ -152,7 +155,7 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, } /* - * If there is any handler to run, schedule the dispatcher. + * If there is a handler to run, schedule the dispatcher. * Check for: * 1) Global system notify handler * 2) Global device notify handler @@ -270,6 +273,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) acpi_ut_delete_generic_state(notify_info); } +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * * FUNCTION: acpi_ev_terminate @@ -338,3 +342,5 @@ void acpi_ev_terminate(void) } return_VOID; } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c index 26065c612e76..6a57aa2d70d1 100644 --- a/drivers/acpi/acpica/evsci.c +++ b/drivers/acpi/acpica/evsci.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evsci") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context); @@ -181,3 +181,5 @@ acpi_status acpi_ev_remove_sci_handler(void) return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 61944e89565a..44bef5744ebb 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -51,222 +51,6 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxface") -/******************************************************************************* - * - * FUNCTION: acpi_install_exception_handler - * - * PARAMETERS: Handler - Pointer to the handler function for the - * event - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function - * - ******************************************************************************/ -#ifdef ACPI_FUTURE_USAGE -acpi_status acpi_install_exception_handler(acpi_exception_handler handler) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_exception_handler); - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (acpi_gbl_exception_handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - /* Install the handler */ - - acpi_gbl_exception_handler = handler; - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) -#endif /* ACPI_FUTURE_USAGE */ - -/******************************************************************************* - * - * FUNCTION: acpi_install_global_event_handler - * - * PARAMETERS: Handler - Pointer to the global event handler function - * Context - Value passed to the handler on each event - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function. The global handler - * is invoked upon each incoming GPE and Fixed Event. It is - * invoked at interrupt level at the time of the event dispatch. - * Can be used to update event counters, etc. - * - ******************************************************************************/ -acpi_status -acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); - - /* Parameter validation */ - - if (!handler) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (acpi_gbl_global_event_handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - acpi_gbl_global_event_handler = handler; - acpi_gbl_global_event_handler_context = context; - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) - -/******************************************************************************* - * - * FUNCTION: acpi_install_fixed_event_handler - * - * PARAMETERS: Event - Event type to enable. - * Handler - Pointer to the handler function for the - * event - * Context - Value passed to the handler on each GPE - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function and then enables the - * event. - * - ******************************************************************************/ -acpi_status -acpi_install_fixed_event_handler(u32 event, - acpi_event_handler handler, void *context) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler); - - /* Parameter validation */ - - if (event > ACPI_EVENT_MAX) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (NULL != acpi_gbl_fixed_event_handlers[event].handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - /* Install the handler before enabling the event */ - - acpi_gbl_fixed_event_handlers[event].handler = handler; - acpi_gbl_fixed_event_handlers[event].context = context; - - status = acpi_clear_event(event); - if (ACPI_SUCCESS(status)) - status = acpi_enable_event(event, 0); - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X", - event)); - - /* Remove the handler */ - - acpi_gbl_fixed_event_handlers[event].handler = NULL; - acpi_gbl_fixed_event_handlers[event].context = NULL; - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Enabled fixed event %X, Handler=%p\n", event, - handler)); - } - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) - -/******************************************************************************* - * - * FUNCTION: acpi_remove_fixed_event_handler - * - * PARAMETERS: Event - Event type to disable. - * Handler - Address of the handler - * - * RETURN: Status - * - * DESCRIPTION: Disables the event and unregisters the event handler. - * - ******************************************************************************/ -acpi_status -acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler) -{ - acpi_status status = AE_OK; - - ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler); - - /* Parameter validation */ - - if (event > ACPI_EVENT_MAX) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Disable the event before removing the handler */ - - status = acpi_disable_event(event, 0); - - /* Always Remove the handler */ - - acpi_gbl_fixed_event_handlers[event].handler = NULL; - acpi_gbl_fixed_event_handlers[event].context = NULL; - - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, - "Could not write to fixed event enable register 0x%X", - event)); - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n", - event)); - } - - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) /******************************************************************************* * @@ -334,6 +118,7 @@ acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj, return AE_OK; } + /******************************************************************************* * * FUNCTION: acpi_install_notify_handler @@ -705,6 +490,224 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler) /******************************************************************************* * + * FUNCTION: acpi_install_exception_handler + * + * PARAMETERS: Handler - Pointer to the handler function for the + * event + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function + * + ******************************************************************************/ +#ifdef ACPI_FUTURE_USAGE +acpi_status acpi_install_exception_handler(acpi_exception_handler handler) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_exception_handler); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (acpi_gbl_exception_handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + /* Install the handler */ + + acpi_gbl_exception_handler = handler; + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) +#endif /* ACPI_FUTURE_USAGE */ + +#if (!ACPI_REDUCED_HARDWARE) +/******************************************************************************* + * + * FUNCTION: acpi_install_global_event_handler + * + * PARAMETERS: Handler - Pointer to the global event handler function + * Context - Value passed to the handler on each event + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function. The global handler + * is invoked upon each incoming GPE and Fixed Event. It is + * invoked at interrupt level at the time of the event dispatch. + * Can be used to update event counters, etc. + * + ******************************************************************************/ +acpi_status +acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); + + /* Parameter validation */ + + if (!handler) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (acpi_gbl_global_event_handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + acpi_gbl_global_event_handler = handler; + acpi_gbl_global_event_handler_context = context; + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) + +/******************************************************************************* + * + * FUNCTION: acpi_install_fixed_event_handler + * + * PARAMETERS: Event - Event type to enable. + * Handler - Pointer to the handler function for the + * event + * Context - Value passed to the handler on each GPE + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function and then enables the + * event. + * + ******************************************************************************/ +acpi_status +acpi_install_fixed_event_handler(u32 event, + acpi_event_handler handler, void *context) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler); + + /* Parameter validation */ + + if (event > ACPI_EVENT_MAX) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (NULL != acpi_gbl_fixed_event_handlers[event].handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + /* Install the handler before enabling the event */ + + acpi_gbl_fixed_event_handlers[event].handler = handler; + acpi_gbl_fixed_event_handlers[event].context = context; + + status = acpi_clear_event(event); + if (ACPI_SUCCESS(status)) + status = acpi_enable_event(event, 0); + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X", + event)); + + /* Remove the handler */ + + acpi_gbl_fixed_event_handlers[event].handler = NULL; + acpi_gbl_fixed_event_handlers[event].context = NULL; + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Enabled fixed event %X, Handler=%p\n", event, + handler)); + } + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) + +/******************************************************************************* + * + * FUNCTION: acpi_remove_fixed_event_handler + * + * PARAMETERS: Event - Event type to disable. + * Handler - Address of the handler + * + * RETURN: Status + * + * DESCRIPTION: Disables the event and unregisters the event handler. + * + ******************************************************************************/ +acpi_status +acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler) +{ + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler); + + /* Parameter validation */ + + if (event > ACPI_EVENT_MAX) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Disable the event before removing the handler */ + + status = acpi_disable_event(event, 0); + + /* Always Remove the handler */ + + acpi_gbl_fixed_event_handlers[event].handler = NULL; + acpi_gbl_fixed_event_handlers[event].context = NULL; + + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, + "Could not write to fixed event enable register 0x%X", + event)); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n", + event)); + } + + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) + +/******************************************************************************* + * * FUNCTION: acpi_install_gpe_handler * * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT @@ -984,3 +987,4 @@ acpi_status acpi_release_global_lock(u32 handle) } ACPI_EXPORT_SYMBOL(acpi_release_global_lock) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 1768bbec1002..77cee5a5e891 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -49,6 +49,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfevnt") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * * FUNCTION: acpi_enable @@ -352,3 +353,4 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) } ACPI_EXPORT_SYMBOL(acpi_get_event_status) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 33388fd69df4..86f9b343ebd4 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -50,6 +50,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfgpe") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_update_all_gpes @@ -695,3 +696,4 @@ acpi_get_gpe_device(u32 index, acpi_handle *gpe_device) } ACPI_EXPORT_SYMBOL(acpi_get_gpe_device) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index d21ec5f0b3a9..d0b9ed5df97e 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -48,6 +48,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwacpi") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_hw_set_mode @@ -166,3 +167,5 @@ u32 acpi_hw_get_mode(void) return_UINT32(ACPI_SYS_MODE_LEGACY); } } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c new file mode 100644 index 000000000000..29e859293edd --- /dev/null +++ b/drivers/acpi/acpica/hwesleep.c @@ -0,0 +1,247 @@ +/****************************************************************************** + * + * Name: hwesleep.c - ACPI Hardware Sleep/Wake Support functions for the + * extended FADT-V5 sleep registers. + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwesleep") + +/******************************************************************************* + * + * FUNCTION: acpi_hw_execute_sleep_method + * + * PARAMETERS: method_pathname - Pathname of method to execute + * integer_argument - Argument to pass to the method + * + * RETURN: None + * + * DESCRIPTION: Execute a sleep/wake related method with one integer argument + * and no return value. + * + ******************************************************************************/ +void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + + ACPI_FUNCTION_TRACE(hw_execute_sleep_method); + + /* One argument, integer_argument; No return value expected */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = (u64)integer_argument; + + status = acpi_evaluate_object(NULL, method_pathname, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "While executing method %s", + method_pathname)); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_sleep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state via the extended FADT sleep + * registers (V5 FADT). + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) +{ + acpi_status status; + u8 sleep_type_value; + u64 sleep_status; + + ACPI_FUNCTION_TRACE(hw_extended_sleep); + + /* Extended sleep registers must be valid */ + + if (!acpi_gbl_FADT.sleep_control.address || + !acpi_gbl_FADT.sleep_status.address) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear wake status (WAK_STS) */ + + status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_gbl_system_awake_and_running = FALSE; + + /* Optionally execute _GTS (Going To Sleep) */ + + if (flags & ACPI_EXECUTE_GTS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); + } + + /* Flush caches, as per ACPI specification */ + + ACPI_FLUSH_CPU_CACHE(); + + /* + * Set the SLP_TYP and SLP_EN bits. + * + * Note: We only use the first value returned by the \_Sx method + * (acpi_gbl_sleep_type_a) - As per ACPI specification. + */ + ACPI_DEBUG_PRINT((ACPI_DB_INIT, + "Entering sleep state [S%u]\n", sleep_state)); + + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Wait for transition back to Working State */ + + do { + status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + } while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS)); + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake_prep + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - ACPI_EXECUTE_BFS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Perform first part of OS-independent ACPI cleanup after + * a sleep. Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) +{ + acpi_status status; + u8 sleep_type_value; + + ACPI_FUNCTION_TRACE(hw_extended_wake_prep); + + status = acpi_get_sleep_type_data(ACPI_STATE_S0, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_SUCCESS(status)) { + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + } + + /* Optionally execute _BFS (Back From Sleep) */ + + if (flags & ACPI_EXECUTE_BFS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); + } + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - Reserved, set to zero + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags) +{ + ACPI_FUNCTION_TRACE(hw_extended_wake); + + /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ + + acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; + + /* Execute the wake methods */ + + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); + + /* + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. + */ + (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + acpi_gbl_system_awake_and_running = TRUE; + + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); + return_ACPI_STATUS(AE_OK); +} diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 1a6894afef79..25bd28c4ae8d 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwgpe") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, @@ -479,3 +479,5 @@ acpi_status acpi_hw_enable_all_wakeup_gpes(void) status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL); return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 4ea4eeb51bfd..6b6c83b87b52 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -51,6 +51,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwregs") +#if (!ACPI_REDUCED_HARDWARE) /* Local Prototypes */ static acpi_status acpi_hw_read_multiple(u32 *value, @@ -62,6 +63,8 @@ acpi_hw_write_multiple(u32 value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b); +#endif /* !ACPI_REDUCED_HARDWARE */ + /****************************************************************************** * * FUNCTION: acpi_hw_validate_register @@ -154,6 +157,7 @@ acpi_hw_validate_register(struct acpi_generic_address *reg, acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) { u64 address; + u64 value64; acpi_status status; ACPI_FUNCTION_NAME(hw_read); @@ -175,7 +179,9 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_read_memory((acpi_physical_address) - address, value, reg->bit_width); + address, &value64, reg->bit_width); + + *value = (u32)value64; } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) @@ -225,7 +231,8 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_write_memory((acpi_physical_address) - address, value, reg->bit_width); + address, (u64)value, + reg->bit_width); } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_write_port((acpi_io_address) @@ -240,6 +247,7 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) return (status); } +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_hw_clear_acpi_status @@ -285,7 +293,7 @@ exit: /******************************************************************************* * - * FUNCTION: acpi_hw_get_register_bit_mask + * FUNCTION: acpi_hw_get_bit_register_info * * PARAMETERS: register_id - Index of ACPI Register to access * @@ -658,3 +666,5 @@ acpi_hw_write_multiple(u32 value, return (status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index 3c4a922a9fc2..8ab325cefa68 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -1,7 +1,7 @@ - /****************************************************************************** * - * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface + * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support functions for the + * original/legacy sleep/PM registers. * *****************************************************************************/ @@ -44,212 +44,36 @@ #include <acpi/acpi.h> #include "accommon.h" -#include "actables.h" #include <linux/tboot.h> #include <linux/module.h> #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwsleep") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * - * FUNCTION: acpi_set_firmware_waking_vector - * - * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode - * entry point. - * - * RETURN: Status - * - * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS - * - ******************************************************************************/ -acpi_status -acpi_set_firmware_waking_vector(u32 physical_address) -{ - ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); - - - /* - * According to the ACPI specification 2.0c and later, the 64-bit - * waking vector should be cleared and the 32-bit waking vector should - * be used, unless we want the wake-up code to be called by the BIOS in - * Protected Mode. Some systems (for example HP dv5-1004nr) are known - * to fail to resume if the 64-bit vector is used. - */ - - /* Set the 32-bit vector */ - - acpi_gbl_FACS->firmware_waking_vector = physical_address; - - /* Clear the 64-bit vector if it exists */ - - if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) { - acpi_gbl_FACS->xfirmware_waking_vector = 0; - } - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) - -#if ACPI_MACHINE_WIDTH == 64 -/******************************************************************************* - * - * FUNCTION: acpi_set_firmware_waking_vector64 - * - * PARAMETERS: physical_address - 64-bit physical address of ACPI protected - * mode entry point. - * - * RETURN: Status - * - * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if - * it exists in the table. This function is intended for use with - * 64-bit host operating systems. - * - ******************************************************************************/ -acpi_status -acpi_set_firmware_waking_vector64(u64 physical_address) -{ - ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64); - - - /* Determine if the 64-bit vector actually exists */ - - if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) { - return_ACPI_STATUS(AE_NOT_EXIST); - } - - /* Clear 32-bit vector, set the 64-bit X_ vector */ - - acpi_gbl_FACS->firmware_waking_vector = 0; - acpi_gbl_FACS->xfirmware_waking_vector = physical_address; - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) -#endif - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state_prep + * FUNCTION: acpi_hw_legacy_sleep * * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * - * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231) - * This function must execute with interrupts enabled. - * We break sleeping into 2 stages so that OSPM can handle - * various OS-specific tasks between the two steps. - * - ******************************************************************************/ -acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) -{ - acpi_status status; - struct acpi_object_list arg_list; - union acpi_object arg; - - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); - - /* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */ - - status = acpi_get_sleep_type_data(sleep_state, - &acpi_gbl_sleep_type_a, - &acpi_gbl_sleep_type_b); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Setup parameter object */ - - arg_list.count = 1; - arg_list.pointer = &arg; - - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - /* Run the _PTS method */ - - status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); - } - - /* Setup the argument to _SST */ - - switch (sleep_state) { - case ACPI_STATE_S0: - arg.integer.value = ACPI_SST_WORKING; - break; - - case ACPI_STATE_S1: - case ACPI_STATE_S2: - case ACPI_STATE_S3: - arg.integer.value = ACPI_SST_SLEEPING; - break; - - case ACPI_STATE_S4: - arg.integer.value = ACPI_SST_SLEEP_CONTEXT; - break; - - default: - arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is off */ - break; - } - - /* - * Set the system indicators to show the desired sleep state. - * _SST is an optional method (return no error if not found) - */ - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, - "While executing method _SST")); - } - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) - -static unsigned int gts, bfs; -module_param(gts, uint, 0644); -module_param(bfs, uint, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state - * - * PARAMETERS: sleep_state - Which sleep state to enter - * - * RETURN: Status - * - * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) + * DESCRIPTION: Enter a system sleep state via the legacy FADT PM registers * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) +acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) { - u32 pm1a_control; - u32 pm1b_control; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; + u32 pm1a_control; + u32 pm1b_control; u32 in_value; - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); - - if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || - (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { - ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X", - acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); - return_ACPI_STATUS(AE_AML_OPERAND_VALUE); - } + ACPI_FUNCTION_TRACE(hw_legacy_sleep); sleep_type_reg_info = acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE); @@ -271,6 +95,18 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } + if (sleep_state != ACPI_STATE_S5) { + /* + * Disable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); + if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { + return_ACPI_STATUS(status); + } + } + /* * 1) Disable/Clear all GPEs * 2) Enable all wakeup GPEs @@ -286,18 +122,10 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } - if (gts) { - /* Execute the _GTS method */ + /* Optionally execute _GTS (Going To Sleep) */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); - } + if (flags & ACPI_EXECUTE_GTS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); } /* Get current value of PM1A control */ @@ -375,114 +203,44 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) } } - /* Wait until we enter sleep state */ + /* Wait for transition back to Working State */ do { - status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, - &in_value); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Spin until we wake */ - - } while (!in_value); - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state_s4bios - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Perform a S4 bios request. - * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED - * - ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) -{ - u32 in_value; - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); - - /* Clear the wake status bit (PM1) */ - - status = - acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - status = acpi_hw_clear_acpi_status(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * 1) Disable/Clear all GPEs - * 2) Enable all wakeup GPEs - */ - status = acpi_hw_disable_all_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - acpi_gbl_system_awake_and_running = FALSE; - - status = acpi_hw_enable_all_wakeup_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - ACPI_FLUSH_CPU_CACHE(); - - status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, - (u32) acpi_gbl_FADT.S4bios_request, 8); - - do { - acpi_os_stall(1000); status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } + } while (!in_value); return_ACPI_STATUS(AE_OK); } -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) - /******************************************************************************* * - * FUNCTION: acpi_leave_sleep_state_prep + * FUNCTION: acpi_hw_legacy_wake_prep * - * PARAMETERS: sleep_state - Which sleep state we are exiting + * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a * sleep. - * Called with interrupts DISABLED. + * Called with interrupts ENABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) + +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) { - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; u32 pm1a_control; u32 pm1b_control; - ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); + ACPI_FUNCTION_TRACE(hw_legacy_wake_prep); /* * Set SLP_TYPE and SLP_EN to state S0. @@ -525,27 +283,20 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) } } - if (bfs) { - /* Execute the _BFS method */ + /* Optionally execute _BFS (Back From Sleep) */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); - } + if (flags & ACPI_EXECUTE_BFS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); } return_ACPI_STATUS(status); } /******************************************************************************* * - * FUNCTION: acpi_leave_sleep_state + * FUNCTION: acpi_hw_legacy_wake * * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - Reserved, set to zero * * RETURN: Status * @@ -553,31 +304,17 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) * Called with interrupts ENABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state(u8 sleep_state) + +acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags) { - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; - ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + ACPI_FUNCTION_TRACE(hw_legacy_wake); /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; - - /* Setup parameter object */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - - /* Ignore any errors from these methods */ - - arg.integer.value = ACPI_SST_WAKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); - } + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); /* * GPEs must be enabled before _WAK is called as GPEs @@ -591,46 +328,50 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } + status = acpi_hw_enable_all_runtime_gpes(); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } - arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK")); - } - /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */ + /* + * Now we can execute _WAK, etc. Some machines require that the GPEs + * are enabled before the wake methods are executed. + */ + acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); /* - * Some BIOSes assume that WAK_STS will be cleared on resume and use - * it to determine whether the system is rebooting or resuming. Clear - * it for compatibility. + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. */ acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 1); - acpi_gbl_system_awake_and_running = TRUE; /* Enable power button */ (void) acpi_write_bit_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON]. - enable_register_id, ACPI_ENABLE_EVENT); + [ACPI_EVENT_POWER_BUTTON]. + enable_register_id, ACPI_ENABLE_EVENT); (void) acpi_write_bit_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON]. - status_register_id, ACPI_CLEAR_STATUS); + [ACPI_EVENT_POWER_BUTTON]. + status_register_id, ACPI_CLEAR_STATUS); - arg.integer.value = ACPI_SST_WORKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); + /* + * Enable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); + if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { + return_ACPI_STATUS(status); } + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); return_ACPI_STATUS(status); } -ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index d4973d9da9f1..f1b2c3b94cac 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -49,6 +49,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwtimer") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_get_timer_resolution @@ -187,3 +188,4 @@ acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed) } ACPI_EXPORT_SYMBOL(acpi_get_timer_duration) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 9d38eb6c0d0b..ab513a972c95 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -74,8 +74,7 @@ acpi_status acpi_reset(void) /* Check if the reset register is supported */ - if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || - !reset_reg->address) { + if (!reset_reg->address) { return_ACPI_STATUS(AE_NOT_EXIST); } @@ -138,11 +137,6 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) return (status); } - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - /* Initialize entire 64-bit return value to zero */ *return_value = 0; @@ -154,24 +148,17 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_read_memory((acpi_physical_address) - address, &value, width); + address, return_value, + reg->bit_width); if (ACPI_FAILURE(status)) { return (status); } - *return_value = value; - - if (reg->bit_width == 64) { - - /* Read the top 32 bits */ + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - status = acpi_os_read_memory((acpi_physical_address) - (address + 4), &value, 32); - if (ACPI_FAILURE(status)) { - return (status); - } - *return_value |= ((u64)value << 32); + width = reg->bit_width; + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) address, &value, width); @@ -231,32 +218,22 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) return (status); } - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - /* * Two address spaces supported: Memory or IO. PCI_Config is * not supported here because the GAS structure is insufficient */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_write_memory((acpi_physical_address) - address, ACPI_LODWORD(value), - width); + address, value, reg->bit_width); if (ACPI_FAILURE(status)) { return (status); } + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - if (reg->bit_width == 64) { - status = acpi_os_write_memory((acpi_physical_address) - (address + 4), - ACPI_HIDWORD(value), 32); - if (ACPI_FAILURE(status)) { - return (status); - } + width = reg->bit_width; + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_write_port((acpi_io_address) address, ACPI_LODWORD(value), @@ -286,6 +263,7 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) ACPI_EXPORT_SYMBOL(acpi_write) +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_read_bit_register @@ -453,7 +431,7 @@ unlock_and_exit: } ACPI_EXPORT_SYMBOL(acpi_write_bit_register) - +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * * FUNCTION: acpi_get_sleep_type_data diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c new file mode 100644 index 000000000000..762d059bb508 --- /dev/null +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -0,0 +1,431 @@ +/****************************************************************************** + * + * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include <linux/module.h> + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwxfsleep") + +/* Local prototypes */ +static acpi_status +acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id); + +/* + * Dispatch table used to efficiently branch to the various sleep + * functions. + */ +#define ACPI_SLEEP_FUNCTION_ID 0 +#define ACPI_WAKE_PREP_FUNCTION_ID 1 +#define ACPI_WAKE_FUNCTION_ID 2 + +/* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */ + +static struct acpi_sleep_functions acpi_sleep_dispatch[] = { + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep), + acpi_hw_extended_sleep}, + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep), + acpi_hw_extended_wake_prep}, + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake} +}; + +/* + * These functions are removed for the ACPI_REDUCED_HARDWARE case: + * acpi_set_firmware_waking_vector + * acpi_set_firmware_waking_vector64 + * acpi_enter_sleep_state_s4bios + */ + +#if (!ACPI_REDUCED_HARDWARE) +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector + * + * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode + * entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS + * + ******************************************************************************/ + +acpi_status acpi_set_firmware_waking_vector(u32 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); + + + /* + * According to the ACPI specification 2.0c and later, the 64-bit + * waking vector should be cleared and the 32-bit waking vector should + * be used, unless we want the wake-up code to be called by the BIOS in + * Protected Mode. Some systems (for example HP dv5-1004nr) are known + * to fail to resume if the 64-bit vector is used. + */ + + /* Set the 32-bit vector */ + + acpi_gbl_FACS->firmware_waking_vector = physical_address; + + /* Clear the 64-bit vector if it exists */ + + if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) { + acpi_gbl_FACS->xfirmware_waking_vector = 0; + } + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) + +#if ACPI_MACHINE_WIDTH == 64 +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector64 + * + * PARAMETERS: physical_address - 64-bit physical address of ACPI protected + * mode entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if + * it exists in the table. This function is intended for use with + * 64-bit host operating systems. + * + ******************************************************************************/ +acpi_status acpi_set_firmware_waking_vector64(u64 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64); + + + /* Determine if the 64-bit vector actually exists */ + + if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear 32-bit vector, set the 64-bit X_ vector */ + + acpi_gbl_FACS->firmware_waking_vector = 0; + acpi_gbl_FACS->xfirmware_waking_vector = physical_address; + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_s4bios + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Perform a S4 bios request. + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) +{ + u32 in_value; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); + + /* Clear the wake status bit (PM1) */ + + status = + acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_clear_acpi_status(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * 1) Disable/Clear all GPEs + * 2) Enable all wakeup GPEs + */ + status = acpi_hw_disable_all_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + acpi_gbl_system_awake_and_running = FALSE; + + status = acpi_hw_enable_all_wakeup_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + ACPI_FLUSH_CPU_CACHE(); + + status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, + (u32)acpi_gbl_FADT.S4bios_request, 8); + + do { + acpi_os_stall(1000); + status = + acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } while (!in_value); + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) +#endif /* !ACPI_REDUCED_HARDWARE */ +/******************************************************************************* + * + * FUNCTION: acpi_hw_sleep_dispatch + * + * PARAMETERS: sleep_state - Which sleep state to enter/exit + * function_id - Sleep, wake_prep, or Wake + * + * RETURN: Status from the invoked sleep handling function. + * + * DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling + * function. + * + ******************************************************************************/ +static acpi_status +acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) +{ + acpi_status status; + struct acpi_sleep_functions *sleep_functions = + &acpi_sleep_dispatch[function_id]; + +#if (!ACPI_REDUCED_HARDWARE) + + /* + * If the Hardware Reduced flag is set (from the FADT), we must + * use the extended sleep registers + */ + if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { + status = sleep_functions->extended_function(sleep_state, flags); + } else { + /* Legacy sleep */ + + status = sleep_functions->legacy_function(sleep_state, flags); + } + + return (status); + +#else + /* + * For the case where reduced-hardware-only code is being generated, + * we know that only the extended sleep registers are available + */ + status = sleep_functions->extended_function(sleep_state, flags); + return (status); + +#endif /* !ACPI_REDUCED_HARDWARE */ +} + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Prepare to enter a system sleep state. + * This function must execute with interrupts enabled. + * We break sleeping into 2 stages so that OSPM can handle + * various OS-specific tasks between the two steps. + * + ******************************************************************************/ + +acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) +{ + acpi_status status; + struct acpi_object_list arg_list; + union acpi_object arg; + u32 sst_value; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); + + status = acpi_get_sleep_type_data(sleep_state, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Execute the _PTS method (Prepare To Sleep) */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; + + status = + acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + return_ACPI_STATUS(status); + } + + /* Setup the argument to the _SST method (System STatus) */ + + switch (sleep_state) { + case ACPI_STATE_S0: + sst_value = ACPI_SST_WORKING; + break; + + case ACPI_STATE_S1: + case ACPI_STATE_S2: + case ACPI_STATE_S3: + sst_value = ACPI_SST_SLEEPING; + break; + + case ACPI_STATE_S4: + sst_value = ACPI_SST_SLEEP_CONTEXT; + break; + + default: + sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */ + break; + } + + /* + * Set the system indicators to show the desired sleep state. + * _SST is an optional method (return no error if not found) + */ + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value); + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); + + if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || + (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { + ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X", + acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); + return_ACPI_STATUS(AE_AML_OPERAND_VALUE); + } + + status = + acpi_hw_sleep_dispatch(sleep_state, flags, ACPI_SLEEP_FUNCTION_ID); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state we are exiting + * Flags - ACPI_EXECUTE_BFS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a + * sleep. + * Called with interrupts DISABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); + + status = + acpi_hw_sleep_dispatch(sleep_state, flags, + ACPI_WAKE_PREP_FUNCTION_ID); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep) + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state we are exiting + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state(u8 sleep_state) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + + + status = acpi_hw_sleep_dispatch(sleep_state, 0, ACPI_WAKE_FUNCTION_ID); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index b7f2b3be79ac..3f7f3f6e7dd5 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -242,7 +242,20 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, if (!obj_desc) { - /* No attached object, we are done */ + /* No attached object. Some types should always have an object */ + + switch (type) { + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_PACKAGE: + case ACPI_TYPE_BUFFER: + case ACPI_TYPE_STRING: + case ACPI_TYPE_METHOD: + acpi_os_printf("<No attached object>"); + break; + + default: + break; + } acpi_os_printf("\n"); return (AE_OK); diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c index 30ea5bc53a78..3b5acb0eb406 100644 --- a/drivers/acpi/acpica/nsdumpdv.c +++ b/drivers/acpi/acpica/nsdumpdv.c @@ -121,7 +121,7 @@ void acpi_ns_dump_root_devices(void) return; } - status = acpi_get_handle(NULL, ACPI_NS_SYSTEM_BUS, &sys_bus_handle); + status = acpi_get_handle(NULL, METHOD_NAME__SB_, &sys_bus_handle); if (ACPI_FAILURE(status)) { return; } diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index bbe46a447d34..23ce09686418 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -638,8 +638,8 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Create the new outer package and populate it */ status = - acpi_ns_repair_package_list(data, - return_object_ptr); + acpi_ns_wrap_with_package(data, *elements, + return_object_ptr); if (ACPI_FAILURE(status)) { return (status); } diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 9c35d20eb52b..5519a64a353f 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -71,11 +71,10 @@ ACPI_MODULE_NAME("nsrepair") * Buffer -> String * Buffer -> Package of Integers * Package -> Package of one Package + * An incorrect standalone object is wrapped with required outer package * * Additional possible repairs: - * * Required package elements that are NULL replaced by Integer/String/Buffer - * Incorrect standalone package wrapped with required outer package * ******************************************************************************/ /* Local prototypes */ @@ -91,10 +90,6 @@ static acpi_status acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, union acpi_operand_object **return_object); -static acpi_status -acpi_ns_convert_to_package(union acpi_operand_object *original_object, - union acpi_operand_object **return_object); - /******************************************************************************* * * FUNCTION: acpi_ns_repair_object @@ -151,9 +146,24 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, } } if (expected_btypes & ACPI_RTYPE_PACKAGE) { - status = acpi_ns_convert_to_package(return_object, &new_object); + /* + * A package is expected. We will wrap the existing object with a + * new package object. It is often the case that if a variable-length + * package is required, but there is only a single object needed, the + * BIOS will return that object instead of wrapping it with a Package + * object. Note: after the wrapping, the package will be validated + * for correct contents (expected object type or types). + */ + status = + acpi_ns_wrap_with_package(data, return_object, &new_object); if (ACPI_SUCCESS(status)) { - goto object_repaired; + /* + * The original object just had its reference count + * incremented for being inserted into the new package. + */ + *return_object_ptr = new_object; /* New Package object */ + data->flags |= ACPI_OBJECT_REPAIRED; + return (AE_OK); } } @@ -165,22 +175,27 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, /* Object was successfully repaired */ - /* - * If the original object is a package element, we need to: - * 1. Set the reference count of the new object to match the - * reference count of the old object. - * 2. Decrement the reference count of the original object. - */ if (package_index != ACPI_NOT_PACKAGE_ELEMENT) { - new_object->common.reference_count = - return_object->common.reference_count; + /* + * The original object is a package element. We need to + * decrement the reference count of the original object, + * for removing it from the package. + * + * However, if the original object was just wrapped with a + * package object as part of the repair, we don't need to + * change the reference count. + */ + if (!(data->flags & ACPI_OBJECT_WRAPPED)) { + new_object->common.reference_count = + return_object->common.reference_count; - if (return_object->common.reference_count > 1) { - return_object->common.reference_count--; + if (return_object->common.reference_count > 1) { + return_object->common.reference_count--; + } } ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, - "%s: Converted %s to expected %s at index %u\n", + "%s: Converted %s to expected %s at Package index %u\n", data->pathname, acpi_ut_get_object_type_name(return_object), acpi_ut_get_object_type_name(new_object), @@ -453,65 +468,6 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, /******************************************************************************* * - * FUNCTION: acpi_ns_convert_to_package - * - * PARAMETERS: original_object - Object to be converted - * return_object - Where the new converted object is returned - * - * RETURN: Status. AE_OK if conversion was successful. - * - * DESCRIPTION: Attempt to convert a Buffer object to a Package. Each byte of - * the buffer is converted to a single integer package element. - * - ******************************************************************************/ - -static acpi_status -acpi_ns_convert_to_package(union acpi_operand_object *original_object, - union acpi_operand_object **return_object) -{ - union acpi_operand_object *new_object; - union acpi_operand_object **elements; - u32 length; - u8 *buffer; - - switch (original_object->common.type) { - case ACPI_TYPE_BUFFER: - - /* Buffer-to-Package conversion */ - - length = original_object->buffer.length; - new_object = acpi_ut_create_package_object(length); - if (!new_object) { - return (AE_NO_MEMORY); - } - - /* Convert each buffer byte to an integer package element */ - - elements = new_object->package.elements; - buffer = original_object->buffer.pointer; - - while (length--) { - *elements = - acpi_ut_create_integer_object((u64) *buffer); - if (!*elements) { - acpi_ut_remove_reference(new_object); - return (AE_NO_MEMORY); - } - elements++; - buffer++; - } - break; - - default: - return (AE_AML_OPERAND_TYPE); - } - - *return_object = new_object; - return (AE_OK); -} - -/******************************************************************************* - * * FUNCTION: acpi_ns_repair_null_element * * PARAMETERS: Data - Pointer to validation data structure @@ -677,55 +633,56 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, /******************************************************************************* * - * FUNCTION: acpi_ns_repair_package_list + * FUNCTION: acpi_ns_wrap_with_package * * PARAMETERS: Data - Pointer to validation data structure - * obj_desc_ptr - Pointer to the object to repair. The new - * package object is returned here, - * overwriting the old object. + * original_object - Pointer to the object to repair. + * obj_desc_ptr - The new package object is returned here * * RETURN: Status, new object in *obj_desc_ptr * - * DESCRIPTION: Repair a common problem with objects that are defined to return - * a variable-length Package of Packages. If the variable-length - * is one, some BIOS code mistakenly simply declares a single - * Package instead of a Package with one sub-Package. This - * function attempts to repair this error by wrapping a Package - * object around the original Package, creating the correct - * Package with one sub-Package. + * DESCRIPTION: Repair a common problem with objects that are defined to + * return a variable-length Package of sub-objects. If there is + * only one sub-object, some BIOS code mistakenly simply declares + * the single object instead of a Package with one sub-object. + * This function attempts to repair this error by wrapping a + * Package object around the original object, creating the + * correct and expected Package with one sub-object. * * Names that can be repaired in this manner include: - * _ALR, _CSD, _HPX, _MLS, _PRT, _PSS, _TRT, TSS + * _ALR, _CSD, _HPX, _MLS, _PLD, _PRT, _PSS, _TRT, _TSS, + * _BCL, _DOD, _FIX, _Sx * ******************************************************************************/ acpi_status -acpi_ns_repair_package_list(struct acpi_predefined_data *data, - union acpi_operand_object **obj_desc_ptr) +acpi_ns_wrap_with_package(struct acpi_predefined_data *data, + union acpi_operand_object *original_object, + union acpi_operand_object **obj_desc_ptr) { union acpi_operand_object *pkg_obj_desc; - ACPI_FUNCTION_NAME(ns_repair_package_list); + ACPI_FUNCTION_NAME(ns_wrap_with_package); /* * Create the new outer package and populate it. The new package will - * have a single element, the lone subpackage. + * have a single element, the lone sub-object. */ pkg_obj_desc = acpi_ut_create_package_object(1); if (!pkg_obj_desc) { return (AE_NO_MEMORY); } - pkg_obj_desc->package.elements[0] = *obj_desc_ptr; + pkg_obj_desc->package.elements[0] = original_object; + + ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, + "%s: Wrapped %s with expected Package object\n", + data->pathname, + acpi_ut_get_object_type_name(original_object))); /* Return the new object in the object pointer */ *obj_desc_ptr = pkg_obj_desc; - data->flags |= ACPI_OBJECT_REPAIRED; - - ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, - "%s: Repaired incorrectly formed Package\n", - data->pathname)); - + data->flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED; return (AE_OK); } diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index a535b7afda5c..75113759f69d 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -341,7 +341,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) if (!acpi_ns_valid_path_separator(*external_name) && (*external_name != 0)) { - return_ACPI_STATUS(AE_BAD_PARAMETER); + return_ACPI_STATUS(AE_BAD_PATHNAME); } /* Move on the next segment */ diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index c5d870406f41..4c9c760db4a4 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -363,10 +363,6 @@ static void acpi_tb_convert_fadt(void) u32 address32; u32 i; - /* Update the local FADT table header length */ - - acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); - /* * Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary. * Later code will always use the X 64-bit field. Also, check for an @@ -408,6 +404,10 @@ static void acpi_tb_convert_fadt(void) acpi_gbl_FADT.boot_flags = 0; } + /* Update the local FADT table header length */ + + acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); + /* * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X" * generic address structures as necessary. Later code will always use diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index 1aecf7baa4e0..c03500b4cc7a 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -114,7 +114,6 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) { u32 i; acpi_status status = AE_OK; - struct acpi_table_header *override_table = NULL; ACPI_FUNCTION_TRACE(tb_add_table); @@ -224,25 +223,10 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) /* * ACPI Table Override: * Allow the host to override dynamically loaded tables. + * NOTE: the table is fully mapped at this point, and the mapping will + * be deleted by tb_table_override if the table is actually overridden. */ - status = acpi_os_table_override(table_desc->pointer, &override_table); - if (ACPI_SUCCESS(status) && override_table) { - ACPI_INFO((AE_INFO, - "%4.4s @ 0x%p Table override, replaced with:", - table_desc->pointer->signature, - ACPI_CAST_PTR(void, table_desc->address))); - - /* We can delete the table that was passed as a parameter */ - - acpi_tb_delete_table(table_desc); - - /* Setup descriptor for the new table */ - - table_desc->address = ACPI_PTR_TO_PHYSADDR(override_table); - table_desc->pointer = override_table; - table_desc->length = override_table->length; - table_desc->flags = ACPI_TABLE_ORIGIN_OVERRIDE; - } + (void)acpi_tb_table_override(table_desc->pointer, table_desc); /* Add the table to the global root table list */ @@ -263,6 +247,95 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) /******************************************************************************* * + * FUNCTION: acpi_tb_table_override + * + * PARAMETERS: table_header - Header for the original table + * table_desc - Table descriptor initialized for the + * original table. May or may not be mapped. + * + * RETURN: Pointer to the entire new table. NULL if table not overridden. + * If overridden, installs the new table within the input table + * descriptor. + * + * DESCRIPTION: Attempt table override by calling the OSL override functions. + * Note: If the table is overridden, then the entire new table + * is mapped and returned by this function. + * + ******************************************************************************/ + +struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header + *table_header, + struct acpi_table_desc + *table_desc) +{ + acpi_status status; + struct acpi_table_header *new_table = NULL; + acpi_physical_address new_address = 0; + u32 new_table_length = 0; + u8 new_flags; + char *override_type; + + /* (1) Attempt logical override (returns a logical address) */ + + status = acpi_os_table_override(table_header, &new_table); + if (ACPI_SUCCESS(status) && new_table) { + new_address = ACPI_PTR_TO_PHYSADDR(new_table); + new_table_length = new_table->length; + new_flags = ACPI_TABLE_ORIGIN_OVERRIDE; + override_type = "Logical"; + goto finish_override; + } + + /* (2) Attempt physical override (returns a physical address) */ + + status = acpi_os_physical_table_override(table_header, + &new_address, + &new_table_length); + if (ACPI_SUCCESS(status) && new_address && new_table_length) { + + /* Map the entire new table */ + + new_table = acpi_os_map_memory(new_address, new_table_length); + if (!new_table) { + ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY, + "%4.4s %p Attempted physical table override failed", + table_header->signature, + ACPI_CAST_PTR(void, + table_desc->address))); + return (NULL); + } + + override_type = "Physical"; + new_flags = ACPI_TABLE_ORIGIN_MAPPED; + goto finish_override; + } + + return (NULL); /* There was no override */ + + finish_override: + + ACPI_INFO((AE_INFO, + "%4.4s %p %s table override, new table: %p", + table_header->signature, + ACPI_CAST_PTR(void, table_desc->address), + override_type, new_table)); + + /* We can now unmap/delete the original table (if fully mapped) */ + + acpi_tb_delete_table(table_desc); + + /* Setup descriptor for the new table */ + + table_desc->address = new_address; + table_desc->pointer = new_table; + table_desc->length = new_table_length; + table_desc->flags = new_flags; + + return (new_table); +} + +/******************************************************************************* + * * FUNCTION: acpi_tb_resize_root_table_list * * PARAMETERS: None @@ -396,7 +469,11 @@ void acpi_tb_delete_table(struct acpi_table_desc *table_desc) case ACPI_TABLE_ORIGIN_ALLOCATED: ACPI_FREE(table_desc->pointer); break; - default:; + + /* Not mapped or allocated, there is nothing we can do */ + + default: + return; } table_desc->pointer = NULL; diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 09ca39e14337..0a706cac37de 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -118,6 +118,7 @@ acpi_tb_check_xsdt(acpi_physical_address address) return AE_OK; } +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_tb_initialize_facs @@ -148,6 +149,7 @@ acpi_status acpi_tb_initialize_facs(void) &acpi_gbl_FACS)); return status; } +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * @@ -444,7 +446,7 @@ struct acpi_table_header *acpi_tb_copy_dsdt(u32 table_index) * RETURN: None * * DESCRIPTION: Install an ACPI table into the global data structure. The - * table override mechanism is implemented here to allow the host + * table override mechanism is called to allow the host * OS to replace any table before it is installed in the root * table array. * @@ -454,11 +456,9 @@ void acpi_tb_install_table(acpi_physical_address address, char *signature, u32 table_index) { - u8 flags; - acpi_status status; - struct acpi_table_header *table_to_install; - struct acpi_table_header *mapped_table; - struct acpi_table_header *override_table = NULL; + struct acpi_table_header *table; + struct acpi_table_header *final_table; + struct acpi_table_desc *table_desc; if (!address) { ACPI_ERROR((AE_INFO, @@ -469,69 +469,78 @@ acpi_tb_install_table(acpi_physical_address address, /* Map just the table header */ - mapped_table = - acpi_os_map_memory(address, sizeof(struct acpi_table_header)); - if (!mapped_table) { + table = acpi_os_map_memory(address, sizeof(struct acpi_table_header)); + if (!table) { + ACPI_ERROR((AE_INFO, + "Could not map memory for table [%s] at %p", + signature, ACPI_CAST_PTR(void, address))); return; } /* If a particular signature is expected (DSDT/FACS), it must match */ - if (signature && !ACPI_COMPARE_NAME(mapped_table->signature, signature)) { + if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) { ACPI_ERROR((AE_INFO, "Invalid signature 0x%X for ACPI table, expected [%s]", - *ACPI_CAST_PTR(u32, mapped_table->signature), - signature)); + *ACPI_CAST_PTR(u32, table->signature), signature)); goto unmap_and_exit; } /* + * Initialize the table entry. Set the pointer to NULL, since the + * table is not fully mapped at this time. + */ + table_desc = &acpi_gbl_root_table_list.tables[table_index]; + + table_desc->address = address; + table_desc->pointer = NULL; + table_desc->length = table->length; + table_desc->flags = ACPI_TABLE_ORIGIN_MAPPED; + ACPI_MOVE_32_TO_32(table_desc->signature.ascii, table->signature); + + /* * ACPI Table Override: * * Before we install the table, let the host OS override it with a new * one if desired. Any table within the RSDT/XSDT can be replaced, * including the DSDT which is pointed to by the FADT. + * + * NOTE: If the table is overridden, then final_table will contain a + * mapped pointer to the full new table. If the table is not overridden, + * or if there has been a physical override, then the table will be + * fully mapped later (in verify table). In any case, we must + * unmap the header that was mapped above. */ - status = acpi_os_table_override(mapped_table, &override_table); - if (ACPI_SUCCESS(status) && override_table) { - ACPI_INFO((AE_INFO, - "%4.4s @ 0x%p Table override, replaced with:", - mapped_table->signature, ACPI_CAST_PTR(void, - address))); - - acpi_gbl_root_table_list.tables[table_index].pointer = - override_table; - address = ACPI_PTR_TO_PHYSADDR(override_table); - - table_to_install = override_table; - flags = ACPI_TABLE_ORIGIN_OVERRIDE; - } else { - table_to_install = mapped_table; - flags = ACPI_TABLE_ORIGIN_MAPPED; + final_table = acpi_tb_table_override(table, table_desc); + if (!final_table) { + final_table = table; /* There was no override */ } - /* Initialize the table entry */ + acpi_tb_print_table_header(table_desc->address, final_table); - acpi_gbl_root_table_list.tables[table_index].address = address; - acpi_gbl_root_table_list.tables[table_index].length = - table_to_install->length; - acpi_gbl_root_table_list.tables[table_index].flags = flags; - - ACPI_MOVE_32_TO_32(& - (acpi_gbl_root_table_list.tables[table_index]. - signature), table_to_install->signature); - - acpi_tb_print_table_header(address, table_to_install); + /* Set the global integer width (based upon revision of the DSDT) */ if (table_index == ACPI_TABLE_INDEX_DSDT) { + acpi_ut_set_integer_width(final_table->revision); + } - /* Global integer width is based upon revision of the DSDT */ - - acpi_ut_set_integer_width(table_to_install->revision); + /* + * If we have a physical override during this early loading of the ACPI + * tables, unmap the table for now. It will be mapped again later when + * it is actually used. This supports very early loading of ACPI tables, + * before virtual memory is fully initialized and running within the + * host OS. Note: A logical override has the ACPI_TABLE_ORIGIN_OVERRIDE + * flag set and will not be deleted below. + */ + if (final_table != table) { + acpi_tb_delete_table(table_desc); } unmap_and_exit: - acpi_os_unmap_memory(mapped_table, sizeof(struct acpi_table_header)); + + /* Always unmap the table header that we mapped above */ + + acpi_os_unmap_memory(table, sizeof(struct acpi_table_header)); } /******************************************************************************* diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c index d42ede5260c7..684849949bf3 100644 --- a/drivers/acpi/acpica/utdecode.c +++ b/drivers/acpi/acpica/utdecode.c @@ -497,19 +497,20 @@ char *acpi_ut_get_mutex_name(u32 mutex_id) /* Names for Notify() values, used for debug output */ -static const char *acpi_gbl_notify_value_names[] = { - "Bus Check", - "Device Check", - "Device Wake", - "Eject Request", - "Device Check Light", - "Frequency Mismatch", - "Bus Mode Mismatch", - "Power Fault", - "Capabilities Check", - "Device PLD Check", - "Reserved", - "System Locality Update" +static const char *acpi_gbl_notify_value_names[ACPI_NOTIFY_MAX + 1] = { + /* 00 */ "Bus Check", + /* 01 */ "Device Check", + /* 02 */ "Device Wake", + /* 03 */ "Eject Request", + /* 04 */ "Device Check Light", + /* 05 */ "Frequency Mismatch", + /* 06 */ "Bus Mode Mismatch", + /* 07 */ "Power Fault", + /* 08 */ "Capabilities Check", + /* 09 */ "Device PLD Check", + /* 10 */ "Reserved", + /* 11 */ "System Locality Update", + /* 12 */ "Shutdown Request" }; const char *acpi_ut_get_notify_name(u32 notify_value) @@ -519,9 +520,10 @@ const char *acpi_ut_get_notify_name(u32 notify_value) return (acpi_gbl_notify_value_names[notify_value]); } else if (notify_value <= ACPI_MAX_SYS_NOTIFY) { return ("Reserved"); - } else { /* Greater or equal to 0x80 */ - - return ("**Device Specific**"); + } else if (notify_value <= ACPI_MAX_DEVICE_SPECIFIC_NOTIFY) { + return ("Device Specific"); + } else { + return ("Hardware Specific"); } } #endif diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index 4153584cf526..90f53b42eca9 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -140,6 +140,7 @@ const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = { {NULL, ACPI_TYPE_ANY, NULL} }; +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * * Event and Hardware globals @@ -236,6 +237,7 @@ struct acpi_fixed_event_info acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS] = ACPI_BITMASK_RT_CLOCK_STATUS, ACPI_BITMASK_RT_CLOCK_ENABLE}, }; +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * @@ -286,6 +288,8 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000; +#if (!ACPI_REDUCED_HARDWARE) + /* GPE support */ acpi_gbl_gpe_xrupt_list_head = NULL; @@ -294,6 +298,10 @@ acpi_status acpi_ut_init_globals(void) acpi_current_gpe_count = 0; acpi_gbl_all_gpes_initialized = FALSE; + acpi_gbl_global_event_handler = NULL; + +#endif /* !ACPI_REDUCED_HARDWARE */ + /* Global handlers */ acpi_gbl_system_notify.handler = NULL; @@ -302,7 +310,6 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_init_handler = NULL; acpi_gbl_table_handler = NULL; acpi_gbl_interface_handler = NULL; - acpi_gbl_global_event_handler = NULL; /* Global Lock support */ diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c index 8359c0c5dc98..246798e4c938 100644 --- a/drivers/acpi/acpica/utinit.c +++ b/drivers/acpi/acpica/utinit.c @@ -53,27 +53,35 @@ ACPI_MODULE_NAME("utinit") /* Local prototypes */ static void acpi_ut_terminate(void); +#if (!ACPI_REDUCED_HARDWARE) + +static void acpi_ut_free_gpe_lists(void); + +#else + +#define acpi_ut_free_gpe_lists() +#endif /* !ACPI_REDUCED_HARDWARE */ + +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * - * FUNCTION: acpi_ut_terminate + * FUNCTION: acpi_ut_free_gpe_lists * * PARAMETERS: none * * RETURN: none * - * DESCRIPTION: Free global memory + * DESCRIPTION: Free global GPE lists * ******************************************************************************/ -static void acpi_ut_terminate(void) +static void acpi_ut_free_gpe_lists(void) { struct acpi_gpe_block_info *gpe_block; struct acpi_gpe_block_info *next_gpe_block; struct acpi_gpe_xrupt_info *gpe_xrupt_info; struct acpi_gpe_xrupt_info *next_gpe_xrupt_info; - ACPI_FUNCTION_TRACE(ut_terminate); - /* Free global GPE blocks and related info structures */ gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; @@ -91,7 +99,26 @@ static void acpi_ut_terminate(void) ACPI_FREE(gpe_xrupt_info); gpe_xrupt_info = next_gpe_xrupt_info; } +} +#endif /* !ACPI_REDUCED_HARDWARE */ + +/****************************************************************************** + * + * FUNCTION: acpi_ut_terminate + * + * PARAMETERS: none + * + * RETURN: none + * + * DESCRIPTION: Free global memory + * + ******************************************************************************/ + +static void acpi_ut_terminate(void) +{ + ACPI_FUNCTION_TRACE(ut_terminate); + acpi_ut_free_gpe_lists(); acpi_ut_delete_address_lists(); return_VOID; } diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index 644e8c8ebc4b..afa94f51ff0b 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -145,6 +145,8 @@ acpi_status acpi_enable_subsystem(u32 flags) ACPI_FUNCTION_TRACE(acpi_enable_subsystem); +#if (!ACPI_REDUCED_HARDWARE) + /* Enable ACPI mode */ if (!(flags & ACPI_NO_ACPI_ENABLE)) { @@ -169,6 +171,7 @@ acpi_status acpi_enable_subsystem(u32 flags) ACPI_WARNING((AE_INFO, "Could not map the FACS table")); return_ACPI_STATUS(status); } +#endif /* !ACPI_REDUCED_HARDWARE */ /* * Install the default op_region handlers. These are installed unless @@ -184,7 +187,7 @@ acpi_status acpi_enable_subsystem(u32 flags) return_ACPI_STATUS(status); } } - +#if (!ACPI_REDUCED_HARDWARE) /* * Initialize ACPI Event handling (Fixed and General Purpose) * @@ -220,6 +223,7 @@ acpi_status acpi_enable_subsystem(u32 flags) return_ACPI_STATUS(status); } } +#endif /* !ACPI_REDUCED_HARDWARE */ return_ACPI_STATUS(status); } diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index e5d53b7ddc7e..ca773683d87e 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -605,7 +605,7 @@ int apei_read(u64 *val, struct acpi_generic_address *reg) *val = 0; switch(reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_read_memory64((acpi_physical_address) + status = acpi_os_read_memory((acpi_physical_address) address, val, reg->bit_width); if (ACPI_FAILURE(status)) return -EIO; @@ -636,7 +636,7 @@ int apei_write(u64 val, struct acpi_generic_address *reg) switch (reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_write_memory64((acpi_physical_address) + status = acpi_os_write_memory((acpi_physical_address) address, val, reg->bit_width); if (ACPI_FAILURE(status)) return -EIO; diff --git a/drivers/acpi/bgrt.c b/drivers/acpi/bgrt.c new file mode 100644 index 000000000000..8cf6c46e99fb --- /dev/null +++ b/drivers/acpi/bgrt.c @@ -0,0 +1,175 @@ +/* + * Copyright 2012 Red Hat, Inc <mjg@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/sysfs.h> +#include <acpi/acpi.h> +#include <acpi/acpi_bus.h> + +static struct acpi_table_bgrt *bgrt_tab; +static struct kobject *bgrt_kobj; + +struct bmp_header { + u16 id; + u32 size; +} __attribute ((packed)); + +static struct bmp_header bmp_header; + +static ssize_t show_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->version); +} +static DEVICE_ATTR(version, S_IRUGO, show_version, NULL); + +static ssize_t show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->status); +} +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +static ssize_t show_type(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_type); +} +static DEVICE_ATTR(type, S_IRUGO, show_type, NULL); + +static ssize_t show_xoffset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_x); +} +static DEVICE_ATTR(xoffset, S_IRUGO, show_xoffset, NULL); + +static ssize_t show_yoffset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_y); +} +static DEVICE_ATTR(yoffset, S_IRUGO, show_yoffset, NULL); + +static ssize_t show_image(struct file *file, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) +{ + int size = attr->size; + void __iomem *image = attr->private; + + if (off >= size) { + count = 0; + } else { + if (off + count > size) + count = size - off; + + memcpy_fromio(buf, image+off, count); + } + + return count; +} + +static struct bin_attribute image_attr = { + .attr = { + .name = "image", + .mode = S_IRUGO, + }, + .read = show_image, +}; + +static struct attribute *bgrt_attributes[] = { + &dev_attr_version.attr, + &dev_attr_status.attr, + &dev_attr_type.attr, + &dev_attr_xoffset.attr, + &dev_attr_yoffset.attr, + NULL, +}; + +static struct attribute_group bgrt_attribute_group = { + .attrs = bgrt_attributes, +}; + +static int __init bgrt_init(void) +{ + acpi_status status; + int ret; + void __iomem *bgrt; + + if (acpi_disabled) + return -ENODEV; + + status = acpi_get_table("BGRT", 0, + (struct acpi_table_header **)&bgrt_tab); + + if (ACPI_FAILURE(status)) + return -ENODEV; + + sysfs_bin_attr_init(&image_attr); + + bgrt = ioremap(bgrt_tab->image_address, sizeof(struct bmp_header)); + + if (!bgrt) { + ret = -EINVAL; + goto out_err; + } + + memcpy_fromio(&bmp_header, bgrt, sizeof(bmp_header)); + image_attr.size = bmp_header.size; + iounmap(bgrt); + + image_attr.private = ioremap(bgrt_tab->image_address, image_attr.size); + + if (!image_attr.private) { + ret = -EINVAL; + goto out_err; + } + + + bgrt_kobj = kobject_create_and_add("bgrt", acpi_kobj); + if (!bgrt_kobj) { + ret = -EINVAL; + goto out_iounmap; + } + + ret = sysfs_create_group(bgrt_kobj, &bgrt_attribute_group); + if (ret) + goto out_kobject; + + ret = sysfs_create_bin_file(bgrt_kobj, &image_attr); + if (ret) + goto out_group; + + return 0; + +out_group: + sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); +out_kobject: + kobject_put(bgrt_kobj); +out_iounmap: + iounmap(image_attr.private); +out_err: + return ret; +} + +static void __exit bgrt_exit(void) +{ + iounmap(image_attr.private); + sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); + sysfs_remove_bin_file(bgrt_kobj, &image_attr); +} + +module_init(bgrt_init); +module_exit(bgrt_exit); + +MODULE_AUTHOR("Matthew Garrett"); +MODULE_DESCRIPTION("BGRT boot graphic support"); +MODULE_LICENSE("GPL"); diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 9ecec98bc76e..3263b68cdfa3 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -1010,6 +1010,7 @@ static int __init acpi_bus_init(void) } struct kobject *acpi_kobj; +EXPORT_SYMBOL_GPL(acpi_kobj); static int __init acpi_init(void) { diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index b19a18dd994f..3268dcfbaa9b 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -812,10 +812,10 @@ static int acpi_ec_add(struct acpi_device *device) first_ec = ec; device->driver_data = ec; - WARN(!request_region(ec->data_addr, 1, "EC data"), - "Could not request EC data io port 0x%lx", ec->data_addr); - WARN(!request_region(ec->command_addr, 1, "EC cmd"), - "Could not request EC cmd io port 0x%lx", ec->command_addr); + ret = !!request_region(ec->data_addr, 1, "EC data"); + WARN(!ret, "Could not request EC data io port 0x%lx", ec->data_addr); + ret = !!request_region(ec->command_addr, 1, "EC cmd"); + WARN(!ret, "Could not request EC cmd io port 0x%lx", ec->command_addr); pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c index 7a2035fa8c71..266bc58ce0ce 100644 --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -95,8 +95,8 @@ static int suspend_nvs_register(unsigned long start, unsigned long size) { struct nvs_page *entry, *next; - pr_info("PM: Registering ACPI NVS region at %lx (%ld bytes)\n", - start, size); + pr_info("PM: Registering ACPI NVS region [mem %#010lx-%#010lx] (%ld bytes)\n", + start, start + size - 1, size); while (size > 0) { unsigned int nr_bytes; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 412a1e04a922..9fddb55764f3 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -347,7 +347,7 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) unsigned long pfn; pfn = pg_off >> PAGE_SHIFT; - if (page_is_ram(pfn)) + if (should_use_kmap(pfn)) kunmap(pfn_to_page(pfn)); else iounmap(vaddr); @@ -554,6 +554,15 @@ acpi_os_table_override(struct acpi_table_header * existing_table, return AE_OK; } +acpi_status +acpi_os_physical_table_override(struct acpi_table_header *existing_table, + acpi_physical_address * new_address, + u32 *new_table_length) +{ + return AE_SUPPORT; +} + + static irqreturn_t acpi_irq(int irq, void *dev_id) { u32 handled; @@ -595,7 +604,8 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler, acpi_irq_handler = handler; acpi_irq_context = context; - if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) { + if (request_threaded_irq(irq, NULL, acpi_irq, IRQF_SHARED, "acpi", + acpi_irq)) { printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq); acpi_irq_handler = NULL; return AE_NOT_ACQUIRED; @@ -699,49 +709,6 @@ acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width) EXPORT_SYMBOL(acpi_os_write_port); -acpi_status -acpi_os_read_memory(acpi_physical_address phys_addr, u32 * value, u32 width) -{ - void __iomem *virt_addr; - unsigned int size = width / 8; - bool unmap = false; - u32 dummy; - - rcu_read_lock(); - virt_addr = acpi_map_vaddr_lookup(phys_addr, size); - if (!virt_addr) { - rcu_read_unlock(); - virt_addr = acpi_os_ioremap(phys_addr, size); - if (!virt_addr) - return AE_BAD_ADDRESS; - unmap = true; - } - - if (!value) - value = &dummy; - - switch (width) { - case 8: - *(u8 *) value = readb(virt_addr); - break; - case 16: - *(u16 *) value = readw(virt_addr); - break; - case 32: - *(u32 *) value = readl(virt_addr); - break; - default: - BUG(); - } - - if (unmap) - iounmap(virt_addr); - else - rcu_read_unlock(); - - return AE_OK; -} - #ifdef readq static inline u64 read64(const volatile void __iomem *addr) { @@ -758,7 +725,7 @@ static inline u64 read64(const volatile void __iomem *addr) #endif acpi_status -acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width) +acpi_os_read_memory(acpi_physical_address phys_addr, u64 *value, u32 width) { void __iomem *virt_addr; unsigned int size = width / 8; @@ -803,45 +770,6 @@ acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width) return AE_OK; } -acpi_status -acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width) -{ - void __iomem *virt_addr; - unsigned int size = width / 8; - bool unmap = false; - - rcu_read_lock(); - virt_addr = acpi_map_vaddr_lookup(phys_addr, size); - if (!virt_addr) { - rcu_read_unlock(); - virt_addr = acpi_os_ioremap(phys_addr, size); - if (!virt_addr) - return AE_BAD_ADDRESS; - unmap = true; - } - - switch (width) { - case 8: - writeb(value, virt_addr); - break; - case 16: - writew(value, virt_addr); - break; - case 32: - writel(value, virt_addr); - break; - default: - BUG(); - } - - if (unmap) - iounmap(virt_addr); - else - rcu_read_unlock(); - - return AE_OK; -} - #ifdef writeq static inline void write64(u64 val, volatile void __iomem *addr) { @@ -856,7 +784,7 @@ static inline void write64(u64 val, volatile void __iomem *addr) #endif acpi_status -acpi_os_write_memory64(acpi_physical_address phys_addr, u64 value, u32 width) +acpi_os_write_memory(acpi_physical_address phys_addr, u64 value, u32 width) { void __iomem *virt_addr; unsigned int size = width / 8; diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 8ae05ce18500..41de1355edcd 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -68,6 +68,7 @@ #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 #define ACPI_PROCESSOR_NOTIFY_POWER 0x81 #define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82 +#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" #define ACPI_PROCESSOR_LIMIT_USER 0 #define ACPI_PROCESSOR_LIMIT_THERMAL 1 @@ -88,7 +89,7 @@ static int acpi_processor_start(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { {ACPI_PROCESSOR_OBJECT_HID, 0}, - {"ACPI0007", 0}, + {ACPI_PROCESSOR_DEVICE_HID, 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); @@ -535,8 +536,8 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) return -ENOMEM; if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { - kfree(pr); - return -ENOMEM; + result = -ENOMEM; + goto err_free_pr; } pr->handle = device->handle; @@ -576,7 +577,7 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) dev = get_cpu_device(pr->id); if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) { result = -EFAULT; - goto err_free_cpumask; + goto err_clear_processor; } /* @@ -594,9 +595,15 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) err_remove_sysfs: sysfs_remove_link(&device->dev.kobj, "sysdev"); +err_clear_processor: + /* + * processor_device_array is not cleared to allow checks for buggy BIOS + */ + per_cpu(processors, pr->id) = NULL; err_free_cpumask: free_cpumask_var(pr->throttling.shared_cpu_map); - +err_free_pr: + kfree(pr); return result; } @@ -741,20 +748,46 @@ static void acpi_processor_hotplug_notify(acpi_handle handle, return; } +static acpi_status is_processor_device(acpi_handle handle) +{ + struct acpi_device_info *info; + char *hid; + acpi_status status; + + status = acpi_get_object_info(handle, &info); + if (ACPI_FAILURE(status)) + return status; + + if (info->type == ACPI_TYPE_PROCESSOR) { + kfree(info); + return AE_OK; /* found a processor object */ + } + + if (!(info->valid & ACPI_VALID_HID)) { + kfree(info); + return AE_ERROR; + } + + hid = info->hardware_id.string; + if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) { + kfree(info); + return AE_ERROR; + } + + kfree(info); + return AE_OK; /* found a processor device object */ +} + static acpi_status processor_walk_namespace_cb(acpi_handle handle, u32 lvl, void *context, void **rv) { acpi_status status; int *action = context; - acpi_object_type type = 0; - status = acpi_get_type(handle, &type); + status = is_processor_device(handle); if (ACPI_FAILURE(status)) - return (AE_OK); - - if (type != ACPI_TYPE_PROCESSOR) - return (AE_OK); + return AE_OK; /* not a processor; continue to walk */ switch (*action) { case INSTALL_NOTIFY_HANDLER: @@ -772,7 +805,8 @@ processor_walk_namespace_cb(acpi_handle handle, break; } - return (AE_OK); + /* found a processor; skip walking underneath */ + return AE_CTRL_DEPTH; } static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) @@ -830,7 +864,7 @@ void acpi_processor_install_hotplug_notify(void) { #ifdef CONFIG_ACPI_HOTPLUG_CPU int action = INSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, + acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, processor_walk_namespace_cb, NULL, &action, NULL); @@ -843,7 +877,7 @@ void acpi_processor_uninstall_hotplug_notify(void) { #ifdef CONFIG_ACPI_HOTPLUG_CPU int action = UNINSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, + acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, processor_walk_namespace_cb, NULL, &action, NULL); diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6b1d32a161ae..b3447f63e46b 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1190,8 +1190,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) * to make the code that updates C-States be called once. */ - if (smp_processor_id() == 0 && - cpuidle_get_driver() == &acpi_idle_driver) { + if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) { cpuidle_pause_and_lock(); /* Protect against cpu-hotplug */ diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 3b599abf2b40..641b5450a0db 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -57,6 +57,27 @@ ACPI_MODULE_NAME("processor_thermal"); static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg); static unsigned int acpi_thermal_cpufreq_is_init = 0; +#define reduction_pctg(cpu) \ + per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu)) + +/* + * Emulate "per package data" using per cpu data (which should really be + * provided elsewhere) + * + * Note we can lose a CPU on cpu hotunplug, in this case we forget the state + * temporarily. Fortunately that's not a big issue here (I hope) + */ +static int phys_package_first_cpu(int cpu) +{ + int i; + int id = topology_physical_package_id(cpu); + + for_each_online_cpu(i) + if (topology_physical_package_id(i) == id) + return i; + return 0; +} + static int cpu_has_cpufreq(unsigned int cpu) { struct cpufreq_policy policy; @@ -76,7 +97,7 @@ static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb, max_freq = ( policy->cpuinfo.max_freq * - (100 - per_cpu(cpufreq_thermal_reduction_pctg, policy->cpu) * 20) + (100 - reduction_pctg(policy->cpu) * 20) ) / 100; cpufreq_verify_within_limits(policy, 0, max_freq); @@ -102,16 +123,28 @@ static int cpufreq_get_cur_state(unsigned int cpu) if (!cpu_has_cpufreq(cpu)) return 0; - return per_cpu(cpufreq_thermal_reduction_pctg, cpu); + return reduction_pctg(cpu); } static int cpufreq_set_cur_state(unsigned int cpu, int state) { + int i; + if (!cpu_has_cpufreq(cpu)) return 0; - per_cpu(cpufreq_thermal_reduction_pctg, cpu) = state; - cpufreq_update_policy(cpu); + reduction_pctg(cpu) = state; + + /* + * Update all the CPUs in the same package because they all + * contribute to the temperature and often share the same + * frequency. + */ + for_each_online_cpu(i) { + if (topology_physical_package_id(i) == + topology_physical_package_id(cpu)) + cpufreq_update_policy(i); + } return 0; } @@ -119,10 +152,6 @@ void acpi_thermal_cpufreq_init(void) { int i; - for (i = 0; i < nr_cpu_ids; i++) - if (cpu_present(i)) - per_cpu(cpufreq_thermal_reduction_pctg, i) = 0; - i = cpufreq_register_notifier(&acpi_thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); if (!i) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 605a2954ef17..1d02b7b5ade0 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -769,7 +769,7 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, u64 *value) { u32 bit_width, bit_offset; - u64 ptc_value; + u32 ptc_value; u64 ptc_mask; struct acpi_processor_throttling *throttling; int ret = -1; @@ -777,12 +777,11 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, throttling = &pr->throttling; switch (throttling->status_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: - ptc_value = 0; bit_width = throttling->status_register.bit_width; bit_offset = throttling->status_register.bit_offset; acpi_os_read_port((acpi_io_address) throttling->status_register. - address, (u32 *) &ptc_value, + address, &ptc_value, (u32) (bit_width + bit_offset)); ptc_mask = (1 << bit_width) - 1; *value = (u64) ((ptc_value >> bit_offset) & ptc_mask); diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index a6c77e8b37bd..c1d612435939 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -23,8 +23,7 @@ void acpi_reboot(void) /* Is the reset register supported? The spec says we should be * checking the bit width and bit offset, but Windows ignores * these fields */ - if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER)) - return; + /* Ignore also acpi_gbl_FADT.flags.ACPI_FADT_RESET_REGISTER */ reset_value = acpi_gbl_FADT.reset_value; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 8ab80bafe3f1..5d24a17aa854 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -880,7 +880,6 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) int j; device->power.flags.power_resources = 1; - ps->flags.valid = 1; for (j = 0; j < ps->resources.count; j++) acpi_bus_add_power_resource(ps->resources.handles[j]); } @@ -888,10 +887,8 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) /* Evaluate "_PSx" to see if we can do explicit sets */ object_name[2] = 'S'; status = acpi_get_handle(device->handle, object_name, &handle); - if (ACPI_SUCCESS(status)) { + if (ACPI_SUCCESS(status)) ps->flags.explicit_set = 1; - ps->flags.valid = 1; - } /* State is valid if we have some power control */ if (ps->resources.count || ps->flags.explicit_set) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ca191ff97844..acf81fe86b53 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -17,6 +17,7 @@ #include <linux/suspend.h> #include <linux/reboot.h> #include <linux/acpi.h> +#include <linux/module.h> #include <asm/io.h> @@ -26,6 +27,24 @@ #include "internal.h" #include "sleep.h" +static unsigned int gts, bfs; +module_param(gts, uint, 0644); +module_param(bfs, uint, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); + +static u8 wake_sleep_flags(void) +{ + u8 flags = ACPI_NO_OPTIONAL_METHODS; + + if (gts) + flags |= ACPI_EXECUTE_GTS; + if (bfs) + flags |= ACPI_EXECUTE_BFS; + + return flags; +} + static u8 sleep_states[ACPI_S_STATE_COUNT]; static void acpi_sleep_tts_switch(u32 acpi_state) @@ -243,6 +262,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; u32 acpi_state = acpi_target_sleep_state; + u8 flags = wake_sleep_flags(); int error; ACPI_FLUSH_CPU_CACHE(); @@ -250,7 +270,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state); + status = acpi_enter_sleep_state(acpi_state, flags); break; case ACPI_STATE_S3: @@ -265,7 +285,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state); + acpi_leave_sleep_state_prep(acpi_state, flags); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -529,27 +549,30 @@ static int acpi_hibernation_begin(void) static int acpi_hibernation_enter(void) { + u8 flags = wake_sleep_flags(); acpi_status status = AE_OK; ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4); + status = acpi_enter_sleep_state(ACPI_STATE_S4, flags); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static void acpi_hibernation_leave(void) { + u8 flags = wake_sleep_flags(); + /* * If ACPI is not enabled by the BIOS and the boot kernel, we need to * enable it here. */ acpi_enable(); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -770,10 +793,12 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { + u8 flags = wake_sleep_flags(); + /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5); + acpi_enter_sleep_state(ACPI_STATE_S5, flags); } /* @@ -788,13 +813,13 @@ static void __init acpi_gts_bfs_check(void) { acpi_handle dummy; - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy))) + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy))) { printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " "please notify linux-acpi@vger.kernel.org\n"); } - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy))) + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy))) { printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 48fbc647b178..7dbebea1ec31 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -941,13 +941,13 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) if (!tz) return -EINVAL; - /* Get temperature [_TMP] (required) */ - result = acpi_thermal_get_temperature(tz); + /* Get trip points [_CRT, _PSV, etc.] (required) */ + result = acpi_thermal_get_trip_points(tz); if (result) return result; - /* Get trip points [_CRT, _PSV, etc.] (required) */ - result = acpi_thermal_get_trip_points(tz); + /* Get temperature [_TMP] (required) */ + result = acpi_thermal_get_temperature(tz); if (result) return result; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index eaef02afc7cf..9577b6fa2650 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -548,27 +548,27 @@ acpi_video_device_EDID(struct acpi_video_device *device, * 1. The system BIOS should NOT automatically control the brightness * level of the LCD when the power changes from AC to DC. * Return Value: - * -1 wrong arg. + * -EINVAL wrong arg. */ static int acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag) { - u64 status = 0; + acpi_status status; union acpi_object arg0 = { ACPI_TYPE_INTEGER }; struct acpi_object_list args = { 1, &arg0 }; - if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) { - status = -1; - goto Failed; - } + if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) + return -EINVAL; arg0.integer.value = (lcd_flag << 2) | bios_flag; video->dos_setting = arg0.integer.value; - acpi_evaluate_object(video->device->handle, "_DOS", &args, NULL); + status = acpi_evaluate_object(video->device->handle, "_DOS", + &args, NULL); + if (ACPI_FAILURE(status)) + return -EIO; - Failed: - return status; + return 0; } /* @@ -1343,15 +1343,17 @@ static int acpi_video_bus_get_devices(struct acpi_video_bus *video, struct acpi_device *device) { - int status = 0; + int status; struct acpi_device *dev; - acpi_video_device_enumerate(video); + status = acpi_video_device_enumerate(video); + if (status) + return status; list_for_each_entry(dev, &device->children, node) { status = acpi_video_bus_get_one_device(dev, video); - if (ACPI_FAILURE(status)) { + if (status) { printk(KERN_WARNING PREFIX "Can't attach device\n"); continue; @@ -1653,15 +1655,20 @@ static int acpi_video_bus_add(struct acpi_device *device) mutex_init(&video->device_list_lock); INIT_LIST_HEAD(&video->video_device_list); - acpi_video_bus_get_devices(video, device); - acpi_video_bus_start_devices(video); + error = acpi_video_bus_get_devices(video, device); + if (error) + goto err_free_video; video->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_stop_video; + goto err_put_video; } + error = acpi_video_bus_start_devices(video); + if (error) + goto err_free_input_dev; + snprintf(video->phys, sizeof(video->phys), "%s/video/input0", acpi_device_hid(video->device)); @@ -1682,7 +1689,7 @@ static int acpi_video_bus_add(struct acpi_device *device) error = input_register_device(input); if (error) - goto err_free_input_dev; + goto err_stop_video; printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n", ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device), @@ -1692,14 +1699,19 @@ static int acpi_video_bus_add(struct acpi_device *device) video->pm_nb.notifier_call = acpi_video_resume; video->pm_nb.priority = 0; - register_pm_notifier(&video->pm_nb); + error = register_pm_notifier(&video->pm_nb); + if (error) + goto err_unregister_input_dev; return 0; - err_free_input_dev: - input_free_device(input); + err_unregister_input_dev: + input_unregister_device(input); err_stop_video: acpi_video_bus_stop_devices(video); + err_free_input_dev: + input_free_device(input); + err_put_video: acpi_video_bus_put_devices(video); kfree(video->attached_array); err_free_video: diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 88a98cff5a44..f7ba316e0ed6 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -609,25 +609,16 @@ static bool mcp_exceeded(struct ips_driver *ips) bool ret = false; u32 temp_limit; u32 avg_power; - const char *msg = "MCP limit exceeded: "; spin_lock_irqsave(&ips->turbo_status_lock, flags); temp_limit = ips->mcp_temp_limit * 100; - if (ips->mcp_avg_temp > temp_limit) { - dev_info(&ips->dev->dev, - "%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp, - temp_limit); + if (ips->mcp_avg_temp > temp_limit) ret = true; - } avg_power = ips->cpu_avg_power + ips->mch_avg_power; - if (avg_power > ips->mcp_power_limit) { - dev_info(&ips->dev->dev, - "%sAvg power %u, limit %u\n", msg, avg_power, - ips->mcp_power_limit); + if (avg_power > ips->mcp_power_limit) ret = true; - } spin_unlock_irqrestore(&ips->turbo_status_lock, flags); diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index b00c17612a89..d21e8f59c84e 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -321,9 +321,14 @@ static int __init acpi_pnp_match(struct device *dev, void *_pnp) { struct acpi_device *acpi = to_acpi_device(dev); struct pnp_dev *pnp = _pnp; + struct device *physical_device; + + physical_device = acpi_get_physical_device(acpi->handle); + if (physical_device) + put_device(physical_device); /* true means it matched */ - return !acpi_get_physical_device(acpi->handle) + return !physical_device && compare_pnp_id(pnp->id, acpi_device_hid(acpi)); } diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f7f71b2d3101..514a691abea0 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -18,3 +18,11 @@ config THERMAL_HWMON depends on THERMAL depends on HWMON=y || HWMON=THERMAL default y + +config SPEAR_THERMAL + bool "SPEAr thermal sensor driver" + depends on THERMAL + depends on PLAT_SPEAR + help + Enable this to plug the SPEAr thermal sensor driver into the Linux + thermal framework diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 31108a01c22e..a9fff0bf4b14 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o +obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
\ No newline at end of file diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c new file mode 100644 index 000000000000..c2e32df3b164 --- /dev/null +++ b/drivers/thermal/spear_thermal.c @@ -0,0 +1,206 @@ +/* + * SPEAr thermal driver. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino <vincenzo.frascino@st.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/platform_data/spear_thermal.h> +#include <linux/thermal.h> + +#define MD_FACTOR 1000 + +/* SPEAr Thermal Sensor Dev Structure */ +struct spear_thermal_dev { + /* pointer to base address of the thermal sensor */ + void __iomem *thermal_base; + /* clk structure */ + struct clk *clk; + /* pointer to thermal flags */ + unsigned int flags; +}; + +static inline int thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct spear_thermal_dev *stdev = thermal->devdata; + + /* + * Data are ready to be read after 628 usec from POWERDOWN signal + * (PDN) = 1 + */ + *temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR; + return 0; +} + +static struct thermal_zone_device_ops ops = { + .get_temp = thermal_get_temp, +}; + +#ifdef CONFIG_PM +static int spear_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + dev_info(dev, "Suspended.\n"); + + return 0; +} + +static int spear_thermal_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + int ret = 0; + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + return ret; + } + + /* Enable SPEAr Thermal Sensor */ + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base); + + dev_info(dev, "Resumed.\n"); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend, + spear_thermal_resume); + +static int spear_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *spear_thermal = NULL; + struct spear_thermal_dev *stdev; + struct spear_thermal_pdata *pdata; + int ret = 0; + struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!stres) { + dev_err(&pdev->dev, "memory resource missing\n"); + return -ENODEV; + } + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "platform data is NULL\n"); + return -EINVAL; + } + + stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); + if (!stdev) { + dev_err(&pdev->dev, "kzalloc fail\n"); + return -ENOMEM; + } + + /* Enable thermal sensor */ + stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start, + resource_size(stres)); + if (!stdev->thermal_base) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -ENOMEM; + } + + stdev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(stdev->clk)) { + dev_err(&pdev->dev, "Can't get clock\n"); + return PTR_ERR(stdev->clk); + } + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + goto put_clk; + } + + stdev->flags = pdata->thermal_flags; + writel_relaxed(stdev->flags, stdev->thermal_base); + + spear_thermal = thermal_zone_device_register("spear_thermal", 0, + stdev, &ops, 0, 0, 0, 0); + if (IS_ERR(spear_thermal)) { + dev_err(&pdev->dev, "thermal zone device is NULL\n"); + ret = PTR_ERR(spear_thermal); + goto disable_clk; + } + + platform_set_drvdata(pdev, spear_thermal); + + dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%p.\n", + stdev->thermal_base); + + return 0; + +disable_clk: + clk_disable(stdev->clk); +put_clk: + clk_put(stdev->clk); + + return ret; +} + +static int spear_thermal_exit(struct platform_device *pdev) +{ + unsigned int actual_mask = 0; + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + + thermal_zone_device_unregister(spear_thermal); + platform_set_drvdata(pdev, NULL); + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + clk_put(stdev->clk); + + return 0; +} + +static struct platform_driver spear_thermal_driver = { + .probe = spear_thermal_probe, + .remove = spear_thermal_exit, + .driver = { + .name = "spear_thermal", + .owner = THIS_MODULE, + .pm = &spear_thermal_pm_ops, + }, +}; + +module_platform_driver(spear_thermal_driver); + +MODULE_AUTHOR("Vincenzo Frascino <vincenzo.frascino@st.com>"); +MODULE_DESCRIPTION("SPEAr thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 220ce7e31cf5..022bacb71a7e 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -23,6 +23,8 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/device.h> #include <linux/err.h> @@ -39,8 +41,6 @@ MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); -#define PREFIX "Thermal: " - struct thermal_cooling_device_instance { int id; char name[THERMAL_NAME_LENGTH]; @@ -60,13 +60,11 @@ static LIST_HEAD(thermal_tz_list); static LIST_HEAD(thermal_cdev_list); static DEFINE_MUTEX(thermal_list_lock); -static unsigned int thermal_event_seqnum; - static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; - again: +again: if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0)) return -ENOMEM; @@ -152,9 +150,9 @@ mode_store(struct device *dev, struct device_attribute *attr, if (!tz->ops->set_mode) return -EPERM; - if (!strncmp(buf, "enabled", sizeof("enabled"))) + if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); - else if (!strncmp(buf, "disabled", sizeof("disabled"))) + else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); else result = -EINVAL; @@ -283,8 +281,7 @@ passive_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(type, 0444, type_show, NULL); static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); -static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \ - passive_store); +static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL), @@ -313,22 +310,6 @@ static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL), }; -#define TRIP_POINT_ATTR_ADD(_dev, _index, result) \ -do { \ - result = device_create_file(_dev, \ - &trip_point_attrs[_index * 2]); \ - if (result) \ - break; \ - result = device_create_file(_dev, \ - &trip_point_attrs[_index * 2 + 1]); \ -} while (0) - -#define TRIP_POINT_ATTR_REMOVE(_dev, _index) \ -do { \ - device_remove_file(_dev, &trip_point_attrs[_index * 2]); \ - device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \ -} while (0) - /* sys I/F for cooling device */ #define to_cooling_device(_dev) \ container_of(_dev, struct thermal_cooling_device, device) @@ -835,15 +816,14 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, return 0; device_remove_file(&tz->device, &dev->attr); - remove_symbol_link: +remove_symbol_link: sysfs_remove_link(&tz->device.kobj, dev->name); - release_idr: +release_idr: release_idr(&tz->idr, &tz->lock, dev->id); - free_mem: +free_mem: kfree(dev); return result; } - EXPORT_SYMBOL(thermal_zone_bind_cooling_device); /** @@ -873,14 +853,13 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, return -ENODEV; - unbind: +unbind: device_remove_file(&tz->device, &pos->attr); sysfs_remove_link(&tz->device.kobj, pos->name); release_idr(&tz->idr, &tz->lock, pos->id); kfree(pos); return 0; } - EXPORT_SYMBOL(thermal_zone_unbind_cooling_device); static void thermal_release(struct device *dev) @@ -888,7 +867,8 @@ static void thermal_release(struct device *dev) struct thermal_zone_device *tz; struct thermal_cooling_device *cdev; - if (!strncmp(dev_name(dev), "thermal_zone", sizeof "thermal_zone" - 1)) { + if (!strncmp(dev_name(dev), "thermal_zone", + sizeof("thermal_zone") - 1)) { tz = to_thermal_zone(dev); kfree(tz); } else { @@ -908,8 +888,9 @@ static struct class thermal_class = { * @devdata: device private data. * @ops: standard thermal cooling devices callbacks. */ -struct thermal_cooling_device *thermal_cooling_device_register( - char *type, void *devdata, const struct thermal_cooling_device_ops *ops) +struct thermal_cooling_device * +thermal_cooling_device_register(char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) { struct thermal_cooling_device *cdev; struct thermal_zone_device *pos; @@ -974,12 +955,11 @@ struct thermal_cooling_device *thermal_cooling_device_register( if (!result) return cdev; - unregister: +unregister: release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); device_unregister(&cdev->device); return ERR_PTR(result); } - EXPORT_SYMBOL(thermal_cooling_device_register); /** @@ -1024,7 +1004,6 @@ void thermal_cooling_device_unregister(struct device_unregister(&cdev->device); return; } - EXPORT_SYMBOL(thermal_cooling_device_unregister); /** @@ -1044,8 +1023,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) if (tz->ops->get_temp(tz, &temp)) { /* get_temp failed - retry it later */ - printk(KERN_WARNING PREFIX "failed to read out thermal zone " - "%d\n", tz->id); + pr_warn("failed to read out thermal zone %d\n", tz->id); goto leave; } @@ -1060,9 +1038,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) ret = tz->ops->notify(tz, count, trip_type); if (!ret) { - printk(KERN_EMERG - "Critical temperature reached (%ld C), shutting down.\n", - temp/1000); + pr_emerg("Critical temperature reached (%ld C), shutting down\n", + temp/1000); orderly_poweroff(true); } } @@ -1100,7 +1077,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) tz->last_temperature = temp; - leave: +leave: if (tz->passive) thermal_zone_device_set_polling(tz, tz->passive_delay); else if (tz->polling_delay) @@ -1199,7 +1176,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, } for (count = 0; count < trips; count++) { - TRIP_POINT_ATTR_ADD(&tz->device, count, result); + result = device_create_file(&tz->device, + &trip_point_attrs[count * 2]); + if (result) + break; + result = device_create_file(&tz->device, + &trip_point_attrs[count * 2 + 1]); if (result) goto unregister; tz->ops->get_trip_type(tz, count, &trip_type); @@ -1235,12 +1217,11 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, if (!result) return tz; - unregister: +unregister: release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); device_unregister(&tz->device); return ERR_PTR(result); } - EXPORT_SYMBOL(thermal_zone_device_register); /** @@ -1279,9 +1260,12 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) if (tz->ops->get_mode) device_remove_file(&tz->device, &dev_attr_mode); - for (count = 0; count < tz->trips; count++) - TRIP_POINT_ATTR_REMOVE(&tz->device, count); - + for (count = 0; count < tz->trips; count++) { + device_remove_file(&tz->device, + &trip_point_attrs[count * 2]); + device_remove_file(&tz->device, + &trip_point_attrs[count * 2 + 1]); + } thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); idr_destroy(&tz->idr); @@ -1289,7 +1273,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) device_unregister(&tz->device); return; } - EXPORT_SYMBOL(thermal_zone_device_unregister); #ifdef CONFIG_NET @@ -1312,10 +1295,11 @@ int thermal_generate_netlink_event(u32 orig, enum events event) void *msg_header; int size; int result; + static unsigned int thermal_event_seqnum; /* allocate memory */ - size = nla_total_size(sizeof(struct thermal_genl_event)) + \ - nla_total_size(0); + size = nla_total_size(sizeof(struct thermal_genl_event)) + + nla_total_size(0); skb = genlmsg_new(size, GFP_ATOMIC); if (!skb) @@ -1331,8 +1315,8 @@ int thermal_generate_netlink_event(u32 orig, enum events event) } /* fill the data */ - attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, \ - sizeof(struct thermal_genl_event)); + attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, + sizeof(struct thermal_genl_event)); if (!attr) { nlmsg_free(skb); @@ -1359,7 +1343,7 @@ int thermal_generate_netlink_event(u32 orig, enum events event) result = genlmsg_multicast(skb, 0, thermal_event_mcgrp.id, GFP_ATOMIC); if (result) - printk(KERN_INFO "failed to send netlink event:%d", result); + pr_info("failed to send netlink event:%d\n", result); return result; } |