summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/Kconfig7
-rw-r--r--drivers/net/ks8842.c174
2 files changed, 133 insertions, 48 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f65857e88ec1..88294762f9e6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1750,11 +1750,12 @@ config TLAN
Please email feedback to <torben.mathiasen@compaq.com>.
config KS8842
- tristate "Micrel KSZ8842"
+ tristate "Micrel KSZ8841/42 with generic bus interface"
depends on HAS_IOMEM
help
- This platform driver is for Micrel KSZ8842 / KS8842
- 2-port ethernet switch chip (managed, VLAN, QoS).
+ This platform driver is for KSZ8841(1-port) / KS8842(2-port)
+ ethernet switch chip (managed, VLAN, QoS) from Micrel or
+ Timberdale(FPGA).
config KS8851
tristate "Micrel KS8851 SPI"
diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
index 0be92613acf0..ee69dea69be8 100644
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ks8842.c
@@ -18,6 +18,7 @@
/* Supports:
* The Micrel KS8842 behind the timberdale FPGA
+ * The genuine Micrel KS8841/42 device with ISA 16/32bit bus interface
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -114,9 +115,14 @@
#define REG_P1CR4 0x02
#define REG_P1SR 0x04
+/* flags passed by platform_device for configuration */
+#define MICREL_KS884X 0x01 /* 0=Timeberdale(FPGA), 1=Micrel */
+#define KS884X_16BIT 0x02 /* 1=16bit, 0=32bit */
+
struct ks8842_adapter {
void __iomem *hw_addr;
int irq;
+ unsigned long conf_flags; /* copy of platform_device config */
struct tasklet_struct tasklet;
spinlock_t lock; /* spinlock to be interrupt safe */
struct work_struct timeout_work;
@@ -192,15 +198,21 @@ static inline u32 ks8842_read32(struct ks8842_adapter *adapter, u16 bank,
static void ks8842_reset(struct ks8842_adapter *adapter)
{
- /* The KS8842 goes haywire when doing softare reset
- * a work around in the timberdale IP is implemented to
- * do a hardware reset instead
- ks8842_write16(adapter, 3, 1, REG_GRR);
- msleep(10);
- iowrite16(0, adapter->hw_addr + REG_GRR);
- */
- iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST);
- msleep(20);
+ if (adapter->conf_flags & MICREL_KS884X) {
+ ks8842_write16(adapter, 3, 1, REG_GRR);
+ msleep(10);
+ iowrite16(0, adapter->hw_addr + REG_GRR);
+ } else {
+ /* The KS8842 goes haywire when doing softare reset
+ * a work around in the timberdale IP is implemented to
+ * do a hardware reset instead
+ ks8842_write16(adapter, 3, 1, REG_GRR);
+ msleep(10);
+ iowrite16(0, adapter->hw_addr + REG_GRR);
+ */
+ iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST);
+ msleep(20);
+ }
}
static void ks8842_update_link_status(struct net_device *netdev,
@@ -269,8 +281,10 @@ static void ks8842_reset_hw(struct ks8842_adapter *adapter)
/* restart port auto-negotiation */
ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4);
- /* only advertise 10Mbps */
- ks8842_clear_bits(adapter, 49, 3 << 2, REG_P1CR4);
+
+ if (!(adapter->conf_flags & MICREL_KS884X))
+ /* only advertise 10Mbps */
+ ks8842_clear_bits(adapter, 49, 3 << 2, REG_P1CR4);
/* Enable the transmitter */
ks8842_enable_tx(adapter);
@@ -296,13 +310,28 @@ static void ks8842_read_mac_addr(struct ks8842_adapter *adapter, u8 *dest)
for (i = 0; i < ETH_ALEN; i++)
dest[ETH_ALEN - i - 1] = ks8842_read8(adapter, 2, REG_MARL + i);
- /* make sure the switch port uses the same MAC as the QMU */
- mac = ks8842_read16(adapter, 2, REG_MARL);
- ks8842_write16(adapter, 39, mac, REG_MACAR1);
- mac = ks8842_read16(adapter, 2, REG_MARM);
- ks8842_write16(adapter, 39, mac, REG_MACAR2);
- mac = ks8842_read16(adapter, 2, REG_MARH);
- ks8842_write16(adapter, 39, mac, REG_MACAR3);
+ if (adapter->conf_flags & MICREL_KS884X) {
+ /*
+ the sequence of saving mac addr between MAC and Switch is
+ different.
+ */
+
+ mac = ks8842_read16(adapter, 2, REG_MARL);
+ ks8842_write16(adapter, 39, mac, REG_MACAR3);
+ mac = ks8842_read16(adapter, 2, REG_MARM);
+ ks8842_write16(adapter, 39, mac, REG_MACAR2);
+ mac = ks8842_read16(adapter, 2, REG_MARH);
+ ks8842_write16(adapter, 39, mac, REG_MACAR1);
+ } else {
+
+ /* make sure the switch port uses the same MAC as the QMU */
+ mac = ks8842_read16(adapter, 2, REG_MARL);
+ ks8842_write16(adapter, 39, mac, REG_MACAR1);
+ mac = ks8842_read16(adapter, 2, REG_MARM);
+ ks8842_write16(adapter, 39, mac, REG_MACAR2);
+ mac = ks8842_read16(adapter, 2, REG_MARH);
+ ks8842_write16(adapter, 39, mac, REG_MACAR3);
+ }
}
static void ks8842_write_mac_addr(struct ks8842_adapter *adapter, u8 *mac)
@@ -313,8 +342,25 @@ static void ks8842_write_mac_addr(struct ks8842_adapter *adapter, u8 *mac)
spin_lock_irqsave(&adapter->lock, flags);
for (i = 0; i < ETH_ALEN; i++) {
ks8842_write8(adapter, 2, mac[ETH_ALEN - i - 1], REG_MARL + i);
- ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1],
- REG_MACAR1 + i);
+ if (!(adapter->conf_flags & MICREL_KS884X))
+ ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1],
+ REG_MACAR1 + i);
+ }
+
+ if (adapter->conf_flags & MICREL_KS884X) {
+ /*
+ the sequence of saving mac addr between MAC and Switch is
+ different.
+ */
+
+ u16 mac;
+
+ mac = ks8842_read16(adapter, 2, REG_MARL);
+ ks8842_write16(adapter, 39, mac, REG_MACAR3);
+ mac = ks8842_read16(adapter, 2, REG_MARM);
+ ks8842_write16(adapter, 39, mac, REG_MACAR2);
+ mac = ks8842_read16(adapter, 2, REG_MARH);
+ ks8842_write16(adapter, 39, mac, REG_MACAR1);
}
spin_unlock_irqrestore(&adapter->lock, flags);
}
@@ -328,8 +374,6 @@ static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
{
struct ks8842_adapter *adapter = netdev_priv(netdev);
int len = skb->len;
- u32 *ptr = (u32 *)skb->data;
- u32 ctrl;
netdev_dbg(netdev, "%s: len %u head %p data %p tail %p end %p\n",
__func__, skb->len, skb->head, skb->data,
@@ -339,17 +383,34 @@ static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
if (ks8842_tx_fifo_space(adapter) < len + 8)
return NETDEV_TX_BUSY;
- /* the control word, enable IRQ, port 1 and the length */
- ctrl = 0x8000 | 0x100 | (len << 16);
- ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO);
+ if (adapter->conf_flags & KS884X_16BIT) {
+ u16 *ptr16 = (u16 *)skb->data;
+ ks8842_write16(adapter, 17, 0x8000 | 0x100, REG_QMU_DATA_LO);
+ ks8842_write16(adapter, 17, (u16)len, REG_QMU_DATA_HI);
+ netdev->stats.tx_bytes += len;
+
+ /* copy buffer */
+ while (len > 0) {
+ iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_LO);
+ iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_HI);
+ len -= sizeof(u32);
+ }
+ } else {
+
+ u32 *ptr = (u32 *)skb->data;
+ u32 ctrl;
+ /* the control word, enable IRQ, port 1 and the length */
+ ctrl = 0x8000 | 0x100 | (len << 16);
+ ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO);
- netdev->stats.tx_bytes += len;
+ netdev->stats.tx_bytes += len;
- /* copy buffer */
- while (len > 0) {
- iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO);
- len -= sizeof(u32);
- ptr++;
+ /* copy buffer */
+ while (len > 0) {
+ iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO);
+ len -= sizeof(u32);
+ ptr++;
+ }
}
/* enqueue packet */
@@ -363,12 +424,23 @@ static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
static void ks8842_rx_frame(struct net_device *netdev,
struct ks8842_adapter *adapter)
{
- u32 status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO);
- int len = (status >> 16) & 0x7ff;
+ u16 status16;
+ u32 status;
+ int len;
- status &= 0xffff;
-
- netdev_dbg(netdev, "%s - rx_data: status: %x\n", __func__, status);
+ if (adapter->conf_flags & KS884X_16BIT) {
+ status16 = ks8842_read16(adapter, 17, REG_QMU_DATA_LO);
+ len = (int)ks8842_read16(adapter, 17, REG_QMU_DATA_HI);
+ len &= 0xffff;
+ netdev_dbg(netdev, "%s - rx_data: status: %x\n",
+ __func__, status16);
+ } else {
+ status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO);
+ len = (status >> 16) & 0x7ff;
+ status &= 0xffff;
+ netdev_dbg(netdev, "%s - rx_data: status: %x\n",
+ __func__, status);
+ }
/* check the status */
if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
@@ -376,22 +448,32 @@ static void ks8842_rx_frame(struct net_device *netdev,
netdev_dbg(netdev, "%s, got package, len: %d\n", __func__, len);
if (skb) {
- u32 *data;
netdev->stats.rx_packets++;
netdev->stats.rx_bytes += len;
if (status & RXSR_MULTICAST)
netdev->stats.multicast++;
- data = (u32 *)skb_put(skb, len);
-
- ks8842_select_bank(adapter, 17);
- while (len > 0) {
- *data++ = ioread32(adapter->hw_addr +
- REG_QMU_DATA_LO);
- len -= sizeof(u32);
+ if (adapter->conf_flags & KS884X_16BIT) {
+ u16 *data16 = (u16 *)skb_put(skb, len);
+ ks8842_select_bank(adapter, 17);
+ while (len > 0) {
+ *data16++ = ioread16(adapter->hw_addr +
+ REG_QMU_DATA_LO);
+ *data16++ = ioread16(adapter->hw_addr +
+ REG_QMU_DATA_HI);
+ len -= sizeof(u32);
+ }
+ } else {
+ u32 *data = (u32 *)skb_put(skb, len);
+
+ ks8842_select_bank(adapter, 17);
+ while (len > 0) {
+ *data++ = ioread32(adapter->hw_addr +
+ REG_QMU_DATA_LO);
+ len -= sizeof(u32);
+ }
}
-
skb->protocol = eth_type_trans(skb, netdev);
netif_rx(skb);
} else
@@ -669,6 +751,8 @@ static int __devinit ks8842_probe(struct platform_device *pdev)
adapter->netdev = netdev;
INIT_WORK(&adapter->timeout_work, ks8842_tx_timeout_work);
adapter->hw_addr = ioremap(iomem->start, resource_size(iomem));
+ adapter->conf_flags = iomem->flags;
+
if (!adapter->hw_addr)
goto err_ioremap;
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 02:00:18 +0300